![sarkarirecruitment.com...deepak singh solanki neha singh parihar shalij rani manu] kaushal akhilesh singh annpurna yadav richa bhatt sonam pandey tejdeep singh sasan yogendra singh](https://static.fdocument.pub/doc/165x107/5e5f29fbc0461a67733f8e82/-deepak-singh-solanki-neha-singh-parihar-shalij-rani-manu-kaushal-akhilesh-singh.jpg)
Neha Singh resume
4
Neha Singh Contact no- 8440039305 Email-id – [email protected] Address – Mechanism Laboratory Mechanical Design (Mechanical Engineering Department) Indian Institute of Technology Delhi, New Delhi- 110016 Citizenship – India Objective I aspire for a professional career, which will provide me unlimited growth opportunities, suitably reward my skills and give chance to gain knowledge as much as possible through team efforts, continuous learning and application of knowledge. Education Master of Technology (M.Tech) in Mechanical design from Indian Institute of Technology Delhi (IIT Delhi) New Delhi, India. Mechanical Engineering Department C.G.P.A (Till 3 rd Semester) – 8/10 Bachelor of Technology (B.Tech) in Mechanical Engineering from Kanpur Institute of Technology, Kanpur, India. Percentage – 77.40 % Research / Projects M.Tech Thesis Title- Development of wear durable Tribological coating Supervisor – Prof. Sujeet Kumar Sinha Description-Polymer composite was prepared for coating on ball bearing. Epoxy, UHMWPE, MoS 2 and hardener were used. Polymer coating thickness is optimized with different contents (wt %) of Mos 2. Basic material characterization tools Tribometer, UTM, Rheometer, Hardness tester, scratch test, SEM, EDS, TEM etc.
-
Upload
neha-singh -
Category
Documents
-
view
21 -
download
1
Transcript of Neha Singh resume
Neha SinghContact no- 8440039305Email-id – [email protected] – Mechanism Laboratory Mechanical Design (Mechanical Engineering Department)
Indian Institute of Technology Delhi, New Delhi-110016Citizenship – India
Objective
I aspire for a professional career, which will provide me unlimited growth opportunities, suitably reward my skills and give chance to gain knowledge as much as possible through team efforts, continuous learning and application of knowledge.
Education
Master of Technology (M.Tech) in Mechanical design from Indian Institute of Technology Delhi (IIT Delhi) New Delhi, India. Mechanical Engineering DepartmentC.G.P.A (Till 3rd Semester) – 8/10
Bachelor of Technology (B.Tech) in Mechanical Engineering from Kanpur Institute of Technology, Kanpur, India.Percentage – 77.40 %
Research / Projects
M.Tech Thesis
Title- Development of wear durable Tribological coating Supervisor – Prof. Sujeet Kumar SinhaDescription-Polymer composite was prepared for coating on ball bearing. Epoxy, UHMWPE, MoS2 and hardener were used. Polymer coating thickness is optimized with different contents (wt %) of Mos2. Basic material characterization tools Tribometer, UTM, Rheometer, Hardness tester, scratch test, SEM, EDS, TEM etc. have been used to analyse these Polymer composite. Spin Coating and spray Coating technique have been used for preparing polymer composite thin films on steel disc. Friction co-efficient and wear life of polymer coating was calculated by using lab fabricated Tribometer.
M.Tech Minor Project
Title- Determination of Prony Series Coefficient of Polymer using Optimization techniqueDescription - Designed Optimization algorithm to determine Prony series coefficient for phenomenological model of polymer and created MATLAB code to implement it, achieving 90% conformance with practical data in team of 2.
Title- Comparative Analysis of Metallic and Composite shell for underwater vessels using FEA
Description - Computed thickness required for underwater vessel to avoid buckling due to hydrostatic pressure for metallic and composite shells with help of ANSYS, obtaining 55% reduction in weight by adopting composite shell in team of 2.
Working Experience
Worked as a Lecturer in Techno India NJR Institute of Technology from Nov 2012 to June 2015
Worked as a Lecturer in S.I.T.E from July 2012 to Oct 2012
Conferences
Participated in 3rd International conference on supply chain Management held by Indian Institution of Industrial Engineering, Nov 2014
Attended International Workshop on “Innovative Manufacturing practices in Automotive and Tyre Industry”, held at Techno India NJR Institute of Technology, during 5-6, April 2013.
Attended National Workshop on Enhancing Material properties by Nanotechnology held at college of Technology and Engineering, Udaipur sponsored by TEQIP-II during 7th -8th Feb 2014
Workshops
Teaching Assistant on QIP Short- course on Tribology of Soft Matters: Bio-Tribology, Microsystems and automotive applications held at IIT Delhi, (7-11 Nov 2016)
Participated in workshop held by IIT Kharagpur on “Fluid Mechanics” (20th May to 30th May 2014).”
Teaching Assistant on workshops held by IIT Bombay on “Engineering Mechanics” (26th Nov to 6th Dec 2013).”
Participated in workshops held by IIT, Bombay on “Akash for Education (10 th -11th
Nov 2012)”, “Engineering Thermodynamics (11th to 21st Dec 2012).”
Academic Achievements
Academic excellence award (2008-2011) 1st prize in “FUNBOTS” (Energy saving device) held in college tech-fest. 1st and 2nd prize in athletics (School level).
Training
Four weeks training in S.A.I.L, BOKARO in the year 2010. Four weeks training in HAL, KANPUR in the year 2009.
Proficiency & Skills
Software’s:Mathematical Tools: MATLABSimulation: ANSYS Workbench and APDLMolecular Dynamics: LAMMPS
Document Editor: Microsoft office word, Power point, ExcelMiscellaneous: CES EduPack, Avogadro, Origin Pro
Declaration
I do hereby declare that all the information stated above are true and correct to the best of my knowledge.
Place: New Delhi, India Neha Singh
Date: 10-01-2017
