Name: Shanghai Institute of Quality Inspection and Technical...
Transcript of Name: Shanghai Institute of Quality Inspection and Technical...
-
ISO/IEC 17025 认可证书
No. CNAS L0128
The scope of the accreditation in Chinese remains the definitive version.
第 1 页 共 187 页
Name: Shanghai Institute of Quality Inspection and Technical Research
Address: No. 918, Wanrong Road, Shanghai, China
Registration No. CNAS L0128
Accreditation Criteria: ISO/IEC 17025:2017 and relevant requirements of CNAS
Effective Date: 2019-12-31 Expiry Date:2024-10-11
SCHEDULE 3 ACCREDITED TESTING SCOPE
Item/Parameter№ Test Object
№ Item/ ParameterStandard or Method Note Effective Date
Chemistry
Metals and alloys
1 Carbon and low-Alloy steel 1
C、Si、Mn、P、S、Cr、Ni、W、Mo、V、Al、Ti、Cu、Nb、Co、B、As、Sn
Carbon and low-alloy steel - Determination of multi-element contents - Spark discharge atomic emission spectrometric method (routine method) GB/T 4336-2016 9.2
2018-07-20
2 Stainless steel 1
C、Si、Mn、P、S、Cr、Ni、Mo、Al、Cu、W、Ti、Nb、V、Co、B、As、Sn、Pb
Stainless steel -Determination of multi-element contents-Spark discharge atomic emission spectrometric method(Routine method) GB/T 11170-2008 8.3
2018-07-20
3 Copper and copper alloys 1Pb、Fe、Bi、Sb、As、Sn、Ni、Zn、
Methods for analysis of copper and copper alloys-The atomic emission spectrometry YS/T 482-2005(2012) 8 2018-07-20
-
ISO/IEC 17025 认可证书
No. CNAS L0128
The scope of the accreditation in Chinese remains the definitive version.
第 2 页 共 187 页
№ Test ObjectItem/Parameter
Standard or Method Note Effective Date№ Item/ Parameter
P、S、Mn、Si、Cr、Al、Mg、Co、Cd
4Aluminum and aluminum alloys|
1
Si、Fe、Cu、Mn、Mg、Cr、Ni、Zn、Ti、V、Pb、Sn、Sb、Bi、Ca、Cd
Optical emission spectrometric analysis method of aluminum and aluminum alloys GB/T 7999-2015 7 2018-07-20
Machinery
Reinforcing Steel Bar
Partial Parameters Steel for the reinforcement of concrete—Part 2:Hot rolled ribbed bars GB/T 1499.2-2018
Expect for fatigue performance, connection performance
2019-12-31
1 chemical composition
Carbon and low-alloy steel-Determination of multi-element contents-Spark discharge atomic emission spectrometric method(routine method) GB/T 4336-2016
2019-12-31
2 stretch Test methods of steel for reinforcement of concrete GB/T 28900-2012 2019-12-31
3 bending Test methods of steel for reinforcement of concrete GB/T 28900-2012 2019-12-31
4 reverse bending Test methods of steel for reinforcement of concrete GB/T 28900-2012 2019-12-31
1Hot roller rib bar for ferroconcrete
5 size Steel for the reinforcement of concrete—Part 2:Hot rolled ribbed bars GB/T 1499.2-2018 8.3 2019-12-31
-
ISO/IEC 17025 认可证书
No. CNAS L0128
The scope of the accreditation in Chinese remains the definitive version.
第 3 页 共 187 页
№ Test ObjectItem/Parameter
Standard or Method Note Effective Date№ Item/ Parameter
6 surface Steel for the reinforcement of concrete—Part 2:Hot rolled ribbed bars GB/T 1499.2-2018 7.10 2019-12-31
7 weight deviation Steel for the reinforcement of concrete—Part 2:Hot rolled ribbed bars GB/T 1499.2-2018 8.4 2019-12-31
8 metallographic structureInspection methods of microstructure for metals GB/T 13298-2015 2019-12-31
9 grain size Determination of estimating the average grain size of metal GB/T 6394-2017 2019-12-31
All items Steel for the reinforcement of concrete Part 1:Hot rolled plain bars GB/T 1499.1-2017 2019-12-31
1 chemical composition
Carbon and low-alloy steel-Determination of multi-element contents-Spark discharge atomic emission spectrometric method(routine method) GB/T 4336-2016
2019-12-31
2 stretch Test methods of steel for reinforcement of concrete GB/T 28900-2012 2019-12-31
3 bending Test methods of steel for reinforcement of concrete GB/T 28900-2012 2019-12-31
4 size Steel for the reinforcement of concrete Part 1:Hot rolled plain bars GB/T 1499.1-2017 8.3 2019-12-31
5 surface Steel for the reinforcement of concrete Part 1:Hot rolled plain bars GB/T 1499.1-2017 7.4 2019-12-31
2Hot roller round bar for ferroconcrete
6 weight deviation Steel for the reinforcement of concrete Part 1:Hot rolled plain bars GB/T 1499.1-2017 8.4 2019-12-31
3Cold rolled ribbed steel wires and bars
Partial Parameters Cold rolled ribbed steel wires and bars GB/T 13788-2008
Except for alternating bending & stress relaxation tests
2019-12-31
-
ISO/IEC 17025 认可证书
No. CNAS L0128
The scope of the accreditation in Chinese remains the definitive version.
第 4 页 共 187 页
№ Test ObjectItem/Parameter
Standard or Method Note Effective Date№ Item/ Parameter
1 stretch Test methods of steel for reinforcement of concrete GB/T 28900-2012 2019-12-31
2 bending Test methods of steel for reinforcement of concrete GB/T 28900-2012 2019-12-31
3 size Cold rolled ribbed steel wires and bars GB/T 13788-2017 7.4 2019-12-31
4 surface Cold rolled ribbed steel wires and bars GB/T 13788-2017 6.4 2019-12-31
5 weight deviation Cold rolled ribbed steel wires and bars GB/T 13788-2017 7.5 2019-12-31
Machine tool
1Metal-cutting machine tools(Safety)
1 Safety Metal-cutting machine tools-General safe guarding specification GB 15760-2004 2018-07-20
1 ElectricalGeneral specifications for metal-cutting machine tools GB/T9061-2006 3.54.6.8
2018-07-20
2 numerical control system
General specifications for metal-cutting machine tools GB/T9061-2006 3.64.6.9
2018-07-20
3 sound measurement General specifications for metal-cutting machine tools GB/T9061-2006 3.94.6.6
2018-07-20
4 operating forceGeneral specifications for metal-cutting machine tools GB/T9061-2006 3.94.6.4
2018-07-20
5 Hardness General specifications for metal-cutting machine tools GB/T9061-2006 3.10 2018-07-20
2
Metal-cutting machine tools(Technical parameter)
6 casting quality General specifications for metal-cutting machine tools GB/T9061-2006 3.13.3 2018-07-20
-
ISO/IEC 17025 认可证书
No. CNAS L0128
The scope of the accreditation in Chinese remains the definitive version.
第 5 页 共 187 页
№ Test ObjectItem/Parameter
Standard or Method Note Effective Date№ Item/ Parameter
7 Temperature rise General specifications for metal-cutting machine tools GB/T9061-2006 4.6.2.1 2018-07-20
8 empty distance General specifications for metal-cutting machine tools GB/T9061-2006 4.6.4 2018-07-20
9 free-load running powerGeneral specifications for metal-cutting machine tools GB/T9061-2006 4.6.7 2018-07-20
10 Machine tool load testGeneral specifications for metal-cutting machine tools GB/T9061-2006 4.7 2018-07-20
11 vibration test General specifications for metal-cutting machine tools GB/T9061-2006 4.8.4 2018-07-20
12 Stiffness test General specifications for metal-cutting machine tools GB/T9061-2006 4.8.5 2018-07-20
1
Electrical equipment of industrial machines - Continuity of the protective bonding circuit test
Electrical Safety of machinery—Electrical equipment of machines—Part 1:General requirements GB 5226.1-2008 20.2
Except for :EMC 2018-07-20
2 resistance test Electrical Safety of machinery—Electrical equipment of machines—Part 1:General requirements GB 5226.1-2008 20.3Except for :EMC 2018-07-20
3
Metal-cutting machine tools(Electrical test)
3 High-voltage test Electrical Safety of machinery—Electrical equipment of machines—Part 1:General requirements GB 5226.1-2008 20.4 2018-07-20
4
Metal-cutting machine tools(Electrical test)
1
Electrical equipment of industrial machines - Continuity of the protective bonding circuit test
Electrical equipment of industrial machines - Continuity of the protective bonding circuit test specifications GB/T 24342-2009 4 2018-07-20
5 Metal-cutting machine 1 resistance testElectrical equipment of industrial machines—Insulation resistance test specifications Electrical equipment of industrial 2018-07-20
-
ISO/IEC 17025 认可证书
No. CNAS L0128
The scope of the accreditation in Chinese remains the definitive version.
第 6 页 共 187 页
№ Test ObjectItem/Parameter
Standard or Method Note Effective Date№ Item/ Parameter
tools(Electrical test)
machines—Insulation resistance test specifications GB/T 24343-2009 4
6
Metal-cutting machine tools(Electrical test)
1 High-voltage test Electrical equipment of industrial machines - High-voltage test specifications GB/T 24344-2009 4 2018-07-20
1 flatnessTest code for machine tools--Part 1: Geometric accuracy of machines operating under no-load or finishing conditions GB/T 17421.1-1998 5.3
2018-07-20
2 parallelismTest code for machine tools--Part 1: Geometric accuracy of machines operating under no-load or finishing conditions GB/T 17421.1-1998 5.4
2018-07-20
3 equidistantTest code for machine tools--Part 1: Geometric accuracy of machines operating under no-load or finishing conditions GB/T 17421.1-1998 5.4.3
2018-07-20
4 axialityTest code for machine tools--Part 1: Geometric accuracy of machines operating under no-load or finishing conditions GB/T 17421.1-1998 5.4.4.2
2018-07-20
5 contact ratioTest code for machine tools--Part 1: Geometric accuracy of machines operating under no-load or finishing conditions GB/T 17421.1-1998 5.5
2018-07-20
6 squarenessTest code for machine tools--Part 1: Geometric accuracy of machines operating under no-load or finishing conditions GB/T 17421.1-1998 5.6
2018-07-20
7 runoutTest code for machine tools--Part 1: Geometric accuracy of machines operating under no-load or finishing conditions GB/T 17421.1-1998 5.6.1
2018-07-20
7
Metal-cutting machine tools(Geometric accuracy)
8 cycle run-outTest code for machine tools--Part 1: Geometric accuracy of machines operating under no-load or finishing conditions GB/T 17421.1-1998 5.6.1
2018-07-20
-
ISO/IEC 17025 认可证书
No. CNAS L0128
The scope of the accreditation in Chinese remains the definitive version.
第 7 页 共 187 页
№ Test ObjectItem/Parameter
Standard or Method Note Effective Date№ Item/ Parameter
9 axial floatTest code for machine tools--Part 1: Geometric accuracy of machines operating under no-load or finishing conditions GB/T 17421.1-1998 5.6.2.
2018-07-20
10 roundnessTest code for machine tools--Part 1: Geometric accuracy of machines operating under no-load or finishing conditions GB/T 17421.1-1998 6.6
2018-07-20
11 cylindricityTest code for machine tools--Part 1: Geometric accuracy of machines operating under no-load or finishing conditions GB/T 17421.1-1998 6.7
2018-07-20
1 flatnessTest code for machine tools--Part 1: Geometric accuracy of machines operating under no-load or finishing conditions ISO 230-1:2012 5.3
2018-07-20
2 parallelismTest code for machine tools--Part 1: Geometric accuracy of machines operating under no-load or finishing conditions ISO 230-1:2012 5.4
2018-07-20
3 equidistantTest code for machine tools--Part 1: Geometric accuracy of machines operating under no-load or finishing conditions ISO 230-1:2012 5.4.3
2018-07-20
4 axialityTest code for machine tools--Part 1: Geometric accuracy of machines operating under no-load or finishing conditions ISO 230-1:2012 5.4.4.2
2018-07-20
5 contact ratioTest code for machine tools--Part 1: Geometric accuracy of machines operating under no-load or finishing conditions ISO 230-1:2012 5.5
2018-07-20
6 squarenessTest code for machine tools--Part 1: Geometric accuracy of machines operating under no-load or finishing conditions ISO 230-1:2012 5.6
2018-07-20
8
Metal-cutting machine tools(Geometric accuracy)
7 runoutTest code for machine tools--Part 1: Geometric accuracy of machines operating under no-load or finishing conditions ISO 230-1:2012 5.6.1
2018-07-20
-
ISO/IEC 17025 认可证书
No. CNAS L0128
The scope of the accreditation in Chinese remains the definitive version.
第 8 页 共 187 页
№ Test ObjectItem/Parameter
Standard or Method Note Effective Date№ Item/ Parameter
8 cycle run-outTest code for machine tools--Part 1: Geometric accuracy of machines operating under no-load or finishing conditions ISO 230-1:2012 5.6.1
2018-07-20
9 axial floatTest code for machine tools--Part 1: Geometric accuracy of machines operating under no-load or finishing conditions ISO 230-1:2012 5.6.2.
2018-07-20
10 roundnessTest code for machine tools--Part 1: Geometric accuracy of machines operating under no-load or finishing conditions ISO 230-1:2012 6.6
2018-07-20
11 cylindricityTest code for machine tools--Part 1: Geometric accuracy of machines operating under no-load or finishing conditions ISO 230-1:2012 6.7
2018-07-20
9
Metal-cutting machine tools(Accuracy of Positioning)
1 positioning accuracyTest code for machine tools-Part 2:Determination of accuracy and repeatability of positioning numerically controlled axes GB/T 17421.2-2016
2018-07-20
10
Metal-cutting machine tools(Accuracy of Positioning)
1 positioning accuracyTest code for machine tools-Part 2:Determination of accuracy and repeatability of positioning numerically controlled axes ISO 230-2:2014
2018-07-20
11
Metal-cutting machine tools(Accuracy of Positioning)
1 positioning accuracy Statistical examination of exactly working and positioning of machine-tools Fundamentels VDI/DGQ 3441 1977-03 2018-07-20
12
Metal-cutting machine tools(Accuracy of Positioning)
1 positioning accuracy Machine tools - Running tests and rigidity tests - General requirements JIS B 6201:1993 2018-07-20
13 Metal-cutting machine 1 Circular testsTest code for machine tools-Part4: Circular tests for numerically controlled machine tools GB/T 17421.4-2016 2018-07-20
-
ISO/IEC 17025 认可证书
No. CNAS L0128
The scope of the accreditation in Chinese remains the definitive version.
第 9 页 共 187 页
№ Test ObjectItem/Parameter
Standard or Method Note Effective Date№ Item/ Parameter
tools(Circular tests)
14
Metal-cutting machine tools(Circular tests)
1 Circular tests Test code for machine tools-Part4: Circular tests for numerically controlled machine tools ISO 230-4:2005 2018-07-20
15
Metal-cutting machine tools(Vibration)
1 vibration Metal-cutting machine tools--Measurement method for vibration GB/T 16768-1997 2018-07-20
16General purpose parallel lathes
All parameters Horizontal lathes-Part2:Specifications JB/T 2322.2-2006 2018-07-20
17General purpose parallel lathes
All parameters Acceptance conditions for general purpose parallel lathes-Testing of the accuracy GB/T 4020-1997 2018-07-20
18
Numerically controlled Instrument lathes
All parameters Numerically controlled instrument lathes-Part2:Specifications JB/T 8326.2-2017 2018-12-28
19
Numerically controlled Instrument lathes
All parameters Numerically controlled instrument lathes-Oart1:Accuracy JB/T 8326.1-2017 2018-12-28
20
Numerically controlled horizontal turning machines
All parameters Numerically controlled horizontal turning machines and turning centres-Part 1:Specifications JB/T 4368.1-2013(2017) 2018-07-20
-
ISO/IEC 17025 认可证书
No. CNAS L0128
The scope of the accreditation in Chinese remains the definitive version.
第 10 页 共 187 页
№ Test ObjectItem/Parameter
Standard or Method Note Effective Date№ Item/ Parameter
21
Numerically controlled horizontal turning machines
All parametersTest conditions for numerically controlled turning machines and turning centres—Part 1:Geometric test for machines with a horizontal workholding spindle GB/T 16462.1-2007
2018-07-20
22
Numerically controlled horizontal turning machines
All parameters Safety of machine tools - Small numerically controlled turning machines and turning centres GB 22997-2008 2018-07-20
23
Numerically controlled horizontal turning machines
All parameters Safety of machine tools - Large numerically controlled turning machines and turning centres GB 22998-2008 2018-07-20
24High precision turning machines
All parameters High precision turning machines-Specifications JB/T 7420-1994 2018-07-20
25High precision turning machines
All parameters High precision horizontal lathes-Part1:Testing of the accuracy JB/T 8768.1-2011 2018-07-20
26Heavy duty horizontal lathes
All parameters Heavy duty horizontal lathes- Part1:Specifications JB/T 3663.1-2006 2018-07-20
27Heavy duty horizontal lathes
All parameters CNC heavy duty horizontal lathes-Part2: Specifications JB/T 8325.2-2006 2018-07-20
28Heavy duty horizontal lathes
All parameters Test conditions for heavy duty horizontal lathe - Testing of the accuracy GB/T 23569-2009 2018-07-20
-
ISO/IEC 17025 认可证书
No. CNAS L0128
The scope of the accreditation in Chinese remains the definitive version.
第 11 页 共 187 页
№ Test ObjectItem/Parameter
Standard or Method Note Effective Date№ Item/ Parameter
29 Instrument lathes All parameters Instrument lathes-Part6:Specifications JB/T 4136.6-2017 2018-12-28
30 Instrument lathes All parametersInstrument lathes-Part3:Testing of the accuracy JB/T 4136.3-2017 2018-12-28
31 Faceplate lathes All parameters Faceplate lathes-Part1: Specifications JB/T 2523.1-2006 2018-07-20
32 Faceplate lathes All parametersFaceplate lathes-Part3:Testing of the accuracy JB/T 2523.3-2011 2018-07-20
33CNC vertical turning machines
All parameters CNC vertical turning machines-Part 2:Specification JB/T 9934.2-2006 2018-07-20
34CNC vertical turning machines
All parametersTest conditions for vertical turning and boring lathes - Testing of the accuracy - Part 1: Single and double column vertical turning and boring lathes GB/T 23582.1-2009
2018-07-20
35CNC automatic lathes with sliding head
All parameters CNC sliding headstock automatic lathe -Part 2:Specifications JB/T 10165.2-2015 2018-07-20
36CNC automatic lathes with sliding head
All parameters CNC sliding headstock automatic lathe - Part 1:Testing the accuracy JB/T 10165.1-2015 2018-07-20
37 Cylindrical grinding All parameters Cylindrical grinding- Part2: Specifications JB/T 7418.2-2015 2018-07-20
38 Cylindrical grinding All parametersExternal cylindrical grinding machines-Testing of the Accuracy GB/T 4685-2007 2018-07-20
39 Cylindrical grinding All parametersExternal cylindrical grinding machines Part3:High precision machine tools-Testing of the Accuracy JB/T 7418.3-2014 2018-07-20
40 Cylindrical grinding All parametersExternal cylindrical grinding machines—Safeguarding specifications GB 24384-2009 2018-07-20
41 Crankshaft grinder All parameters Crankshaft grinder-Part 3:Specifications JB/T 2617.3-2017 2018-12-28
-
ISO/IEC 17025 认可证书
No. CNAS L0128
The scope of the accreditation in Chinese remains the definitive version.
第 12 页 共 187 页
№ Test ObjectItem/Parameter
Standard or Method Note Effective Date№ Item/ Parameter
42
Surface grinding machines with horizontal grinding wheel spindle and reciprocating table
All parametersSurface grinding machines with horizontal grinding wheel spindle and reciprocating table-Part 2:Specifications JB/T 3382.2-2014
2018-07-20
43
Surface grinding machines with horizontal grinding wheel spindle and reciprocating table
All parameters
Surface grinding machines with horizontal grinding wheel spindle and reciprocating table—Testing of the accuracy—Part 1:Machines with a table surface length of up to 1600 mm GB/T 4022.1-2007
2018-07-20
44
Surface grinding machines with horizontal grinding wheel spindle and reciprocating table
All parametersSurface grinding machines with horizontal grinding wheel spindle and reciprocating table—Safeguarding specifications GB 24385-2009
2018-07-20
45
Surface grinding machines with vertical grinding wheel spindle and reciprocating
All parameters Surface grinding machines with vertical grinding wheel spindle and reciprocating table-Part2: Specifications JB/T 4183.2-2014 2018-07-20
-
ISO/IEC 17025 认可证书
No. CNAS L0128
The scope of the accreditation in Chinese remains the definitive version.
第 13 页 共 187 页
№ Test ObjectItem/Parameter
Standard or Method Note Effective Date№ Item/ Parameter
table
46
Surface grinding machines with vertical grinding wheel spindle and reciprocating table
All parameters Surface grinding machines with vertical grinding wheel spindle and reciprocating table-Testing of the accuracy GB/T 6476-2007 2018-07-20
47
Optical projection profile grinding machines
All parameters Optical projection profile grinding machines-Part 3:Specifications JB/T 9912.3-2014 2018-07-20
48
Surface grinding machines with vertical wheel spindle and rotary table
All parameters Surface grinding machines with vertical wheel spindle and rotary table -Part3:Specifications JB/T 9909.3-2014 2018-07-20
49
Surface grinding machines with vertical wheel spindle and rotary table
All parameters Surface grinding machine with vertical spindle and rotary tables-Part2:Testing of the accuracy JB/T 9909.2-2017 2018-12-28
50
External cylindrical centreless grinding
All parameters External cylindrical centreless grinding machines-Part 2:Specifications JB/T 9905.2-2014 2018-07-20
-
ISO/IEC 17025 认可证书
No. CNAS L0128
The scope of the accreditation in Chinese remains the definitive version.
第 14 页 共 187 页
№ Test ObjectItem/Parameter
Standard or Method Note Effective Date№ Item/ Parameter
machines
51
External cylindrical centreless grinding machines
All parameters External cylindrical centreless grinding machines—Testing of the accuracy GB/T 4681-2007 2018-07-20
52 Grinder for bearing race All parametersGrinder for bearing race- Part3: Specifications JB/T 4071.3-2007 2018-07-20
53 Grinder for bearing race All parametersGrinding machines for bearing ring-Part 1: Outer surface grinding machines-Testing of the accuracy JB/T 4071.1-2007 2018-07-20
54 Grinder for bearing race All parametersGrinding machines for bearing ring-Part 2: Inner surface grinding machines-Testing of the accuracy JB/T 4071.2-2007 2018-07-20
55
Superfinishing machine for groove of bearing inner rings and superfinishing machine for groove of bearing outer rings
All parametersSuperfinishing machine for groove of bearing inner rings and superfinishing machine for groove of bearing outer rings-Part 2:Specifications JB/T 9921.2-2007
2018-07-20
56
Superfinishing machine for groove of bearing inner rings and superfinishing machine for groove of
All parametersSuperfinishing machine for groove of bearing inner rings and superfinishing machine for groove of bearing outer rings-Part1:Testing of the accuracy JB/T 9921.1-2017
2018-12-28
-
ISO/IEC 17025 认可证书
No. CNAS L0128
The scope of the accreditation in Chinese remains the definitive version.
第 15 页 共 187 页
№ Test ObjectItem/Parameter
Standard or Method Note Effective Date№ Item/ Parameter
bearing outer rings
57
Double disc surface grinding machines
All parameters Double disc surface grinding machines -Part2: Specifications JB/T 9907.2-2014 2018-07-20
58
Double disc surface grinding machines
All parametersDouble disc surface grinding machines --Part 3: Double disc surface grinding machines with vertical spindle --Testing of the accuracy JB/T 9907.3-2014
2018-07-20
59CNC bed-type milling machines
All parameters CNC bed-type milling machines-Specifications JB/T 8329-2008 2018-07-20
60CNC bed-type milling machines
All parametersTest conditions for CNC copying bed-type milling machines-Testing of the accuracy-Part 1:Milling machines with horizontal spindle GB/T 20958.1-2007
2018-07-20
61CNC bed-type milling machines
All parametersTest conditions for CNC copying bed-type milling machines-Testing of the accuracy-Part 2:Milling machines with vertical spindle GB/T 20958.2-2007
2018-07-20
62
Milling machines with table of variable height
All parameters Milling machines with table of variable height- Part2: Technical conditions JB/T 2800.2-2006 2018-07-20
63
Milling machines with table of variable height
All parametersTest conditions for milling machines with table of variable height–Testing of the accuracy-Part2:Machines with horizontal spindle GB/T 3933.2 -2002
2018-07-20
64Milling machines with table of
All parametersTest conditions for milling machines with table of variable height–Testing of the accuracy-Part3:Machines with vertical spindle GB/T 3933.3 -2002
2018-07-20
-
ISO/IEC 17025 认可证书
No. CNAS L0128
The scope of the accreditation in Chinese remains the definitive version.
第 16 页 共 187 页
№ Test ObjectItem/Parameter
Standard or Method Note Effective Date№ Item/ Parameter
variable height
65
Numerically controlled vertical milling machines with table of variable height
All parameters Numerically controlled vertical milling machines with table of variable height-Specifications JB/T 9928.2-1999 2018-07-20
66
Numerically controlled vertical milling machines with table of variable height
All parameters
Test conditions for CNC milling machines with table of variable height - Testing of accuracy - Part 2: Machines with vertical spindle GB/T 21948.2-2008
2018-07-20
67
milling machines with table of fixed height
All parametersTest conditions for manually controlled milling machines with table of fixed height-Testing of the accuracy –Part1:Machines with horizontal spindle GB/T 3932.1-2006
2018-07-20
68
milling machines with table of fixed height
All parametersTest conditions for manually controlled milling machines with table of fixed height-Testing of the accuracy –Part2:Machines with horizontal spindle GB/T 3932.2-2006
2018-07-20
69 Machining centres All parameters Machining centres-Safeguarding specification GB 18568-2001 2018-07-20
70 Machining centres All parameters Machining centers-Specifications JB/T 8801-2017 2018-07-20
71 Machining centres All parametersTest conditions for machining centres —Part1:Geometric tests for machines with horizontal spindle and with accessory heads(horizontal Z axis) GB/T 18400.1-2010
2018-07-20
72 Machining All parameters Test conditions for machining centers Part2: Geometric test for 2018-07-20
-
ISO/IEC 17025 认可证书
No. CNAS L0128
The scope of the accreditation in Chinese remains the definitive version.
第 17 页 共 187 页
№ Test ObjectItem/Parameter
Standard or Method Note Effective Date№ Item/ Parameter
centres machines with vertical spindle JB/T 8771.2-1998(2009)
73 Machining centres All parametersTest conditions of machining centres-Part 4: Accuracy and repeatability of positioning of linear and rotary axes GB/T 18400.4-2010
2018-07-20
74 Machining centres All parametersTest conditions of machining centres Part 5: Tests for accuracy and repeatability of positioning of work-holding pallets GB/T 18400.5-2010
2018-07-20
75 Machining centres All parametersTest conditions of machining centres Part7:Accuracy of finished test piece GB/T 18400.7-2010 2018-07-20
76Precision machining centres
All parameters Precision machining centres-Specifications GB/T 21012-2007 2018-07-20
77Precision machining centres
All parametersTest conditions for precision machining centres-Part 1: Geometric tests for machines with horizontal spindle and with accessory heads(horizontal Z axis) GB/T 20957.1-2007
2018-07-20
78Precision machining centres
All parameters
Test conditions for precision machining centres-Part 2: Geometric tests for machines with vertical spindle or universal heads with vertical primary rotary axis(vertical Z axis) GB/T 20957.2-2007
2018-07-20
79Precision machining centres
All parametersTest conditions of precision machining centres-Part 4: Accuracy and repeatability of positioning of linear and rotary axes GB/T 20957.4-2007
2018-07-20
80Precision machining centres
All parametersTest conditions of precision machining centres-Part 5: Tests for accuracy and repeatability of positioning of work-holding pallets GB/T 20957.5-2007
2018-07-20
81Precision machining centres
All parameters Test conditions of precision machining centres-Part 7: Accuracy of a finished test piece GB/T 20957.7-2007 2018-07-20
-
ISO/IEC 17025 认可证书
No. CNAS L0128
The scope of the accreditation in Chinese remains the definitive version.
第 18 页 共 187 页
№ Test ObjectItem/Parameter
Standard or Method Note Effective Date№ Item/ Parameter
82Drilling machining centres
All parameters Drilling machining centres-Part 2: Specifications JB/T 8648.2-2008 2018-07-20
83Drilling machining centres
All parameters Drilling machining centres-Part 1:Testing of the accuracy JB/T 8648.1-2008(2017) 2018-07-20
84CNC vertical drilling machines
All parameters CNC vertical drilling machines-Part 2:Specifications JB/T 8357.2-2008(2017) 2018-07-20
85CNC vertical drilling machines
All parameters CNC vertical drilling machines-Part 1:Testing of the accuracy JB/T 8357.1-2008 2018-07-20
86 Radial drilling machine All parameters Radial drilling machine-Part2:Specifications JB/T 6335.2-2006 2018-07-20
87 Radial drilling machine All parametersRadial drilling machines-Testing of the accuracy GB/T 4017-1997 2018-07-20
88 NC jig boring machines All parameters NC jig boring machines-Specifications JB/T 7416-2007 2018-07-20
89 NC jig boring machines All parameters NC jig boring machines-Accuracy GB/T 14660-1993 2018-07-20
90 NC jig boring machines All parametersNC portal-type boring and milling machines-Specification JB/T 6600-2006 2018-07-20
91 NC jig boring machines All parametersMachine tools—Test conditions for bridge-type milling machines—Testing of the accuracy—Part 1:Fixed bridge(portal-type) machines GB/T 19362.1-2003
2018-07-20
92 NC jig boring machines All parametersMachine tools—Test conditions for bridge-type milling machines—Testing of the accuracy—Part 1:Fixed bridge(portal-type) machines ISO 8636-1:2000
2018-07-20
93 Boring and milling All parametersBoring and milling machines with horizontal spindle-Part4: Specification JB/T 4241.4-2006 2018-07-20
-
ISO/IEC 17025 认可证书
No. CNAS L0128
The scope of the accreditation in Chinese remains the definitive version.
第 19 页 共 187 页
№ Test ObjectItem/Parameter
Standard or Method Note Effective Date№ Item/ Parameter
machines with horizontal
94
Boring and milling machines with horizontal
All parametersTest conditions for boring and milling machines with horizontal spindle-Testing of the accuracy - Part 1:Machines with fixed column and movable table GB/T 5289.1-2008
2018-07-20
95
Boring and milling machines with horizontal
All parametersTest conditions for boring and milling machines with horizontal spindle-Testing of the accuracy-Part4 :Planer type machines with movable column JB/T 4373-1999
2018-07-20
96Cylinder honing machine
All parameters Cylinder honing machine JT/T 125-2007 2018-07-20
97 Shaping machines All parametersShaping machines- Part3: SpecificationsJB/T 3362.3-2006 JB/T 3362.3-2006 2018-07-20
98
Slideways grinding machines with two columns
All parameters Slideways grinding machines with two columns-Part 2: Specifications JB/T 10578.2-2014 2018-07-20
99
Slideways grinding machines with two columns
All parameters Slideways grinding machines with two columns-Testing of the accuracy GB/T 5288-2007 2018-07-20
100
Slideways grinding machines with two columns
All parameters Slideways grinding machines with two columns-Testing of the accuracy ISO 4703:2001 2018-07-20
101 Gear hobbing machines All parameters Gear hobbing machines-Part 2:Specifications JB/T 6344.2-2013 2018-07-20
-
ISO/IEC 17025 认可证书
No. CNAS L0128
The scope of the accreditation in Chinese remains the definitive version.
第 20 页 共 187 页
№ Test ObjectItem/Parameter
Standard or Method Note Effective Date№ Item/ Parameter
102 Gear hobbing machines All parametersGear hobbing machines- Testing of the accuracy GB/T 8064-1998 2018-07-20
103 Gear hobbing machines All parameters Gear hobbing machines- Testing of the accuracy ISO 6545:1992 2018-07-20
104Horizontal band sawing machine
All parameters Horizontal band sawing machine-Part 2:Testing of the accuracy JB/T 4318.2-2013 2018-07-20
105Horizontal band sawing machine
All parameters Horizontal band sawing machine-Part 3: Specifications JB/T 4318.3-2013 2018-07-20
106Vertical band sawing machine
All parameters Vertical band sawing machine -Part3:Ordinnary type vertical band sawing machine -Specifications JB/T 9930.3-2015 2018-07-20
107Vertical band sawing machine
All parameters Vertical band sawing machine -Part2:Ordinnary type vertical band sawing machine -Testing of the accuracy JB/T 9930.2-2015 2018-07-20
108 Roll grinding machines All parametersRoll grinding machines-Part 2:Grinding wheel moving style roll grinding machines Specifications JB/T 6340.2-2007
2018-07-20
109 Roll grinding machines All parametersRoll grinding machine-Part 3:Grinding machine with wheelhead moving style-Testing of the accuracy JB/T 6340.3-2008 2018-07-20
110Metalforming machinery-Safety
Safety Metalforming machinery-Safety requirements GB 17120-2012 2018-07-20
1 Hardness General specifications for metalforming machine JB/T 1829-2014 3.9 2018-07-20
2 operating force General specifications for metalforming machine JB/T 1829-2014 3.2 2018-07-20111Metalforming machinery (performance)
3 sound General specifications for metalforming machine JB/T 1829-2014 3.4 2018-07-20
-
ISO/IEC 17025 认可证书
No. CNAS L0128
The scope of the accreditation in Chinese remains the definitive version.
第 21 页 共 187 页
№ Test ObjectItem/Parameter
Standard or Method Note Effective Date№ Item/ Parameter
4 rigidity General specifications for metalforming machine JB/T 1829-2014 3.9 2018-07-20
5 Temperature rise General specifications for metalforming machine JB/T 1829-2014 4.9 2018-07-20
6 Cleanliness General specifications for metalforming machine JB/T 1829-2014 3.13 2018-07-20
7 Electrical General specifications for metalforming machine JB/T 1829-2014 4.13 2018-07-20
8 Load test General specifications for metalforming machine JB/T 1829-2014 4.16 2018-07-20
1 straightness Test code of accuracy for metalforming machine GB/T 10923-2009 5.3 2018-07-20
2 flatness Test code of accuracy for metalforming machine GB/T 10923-2009 5.4 2018-07-20
3 parallelism Test code of accuracy for metalforming machine GB/T 10923-2009 5.4.3,5.4.4.2 2018-07-20
4 equidistant Test code of accuracy for metalforming machine GB/T 10923-2009 5.5 2018-07-20
5 axiality Test code of accuracy for metalforming machine GB/T 10923-2009 5.6 2018-07-20
6 contact ratio Test code of accuracy for metalforming machine GB/T 10923-2009 5.6.1 2018-07-20
7 squareness Test code of accuracy for metalforming machine GB/T 10923-2009 5.6.1 2018-07-20
8 runout Test code of accuracy for metalforming machine GB/T 10923-2009 5.6.2 2018-07-20
9 cycle run-out Test code of accuracy for metalforming machine GB/T 10923-2009 6.6 2018-07-20
112Metalforming machinery (accuracy )
10 axial float Test code of accuracy for metalforming machine GB/T 10923-2009 6.7 2018-07-20
-
ISO/IEC 17025 认可证书
No. CNAS L0128
The scope of the accreditation in Chinese remains the definitive version.
第 22 页 共 187 页
№ Test ObjectItem/Parameter
Standard or Method Note Effective Date№ Item/ Parameter
11 roundness Test code of accuracy for metalforming machine GB/T 10923-2009 5.2.3 2018-07-20
12 cylindricity Test code of accuracy for metalforming machine GB/T 10923-2009 2018-07-20
13 Position accuracy Test code of accuracy for metalforming machine GB/T 10923-2009 2018-07-20
113Metalforming machinery (sound )
1 sound Metal forming machinery -sound measurement method of sound pressure levels GB/T 23281-2009 2018-07-20
114Metalforming machinery (sound )
1 soundMetal forming machinery - sound measurement method of sound power levels GB/T 23282-2009
2018-07-20
115 Open press All parameters Open press-Part 1:Specifications JB/T 6580.1-2014 2018-07-20
116 Open press All parameters Mechanical press-Safety requirements GB 27607-2011 2018-07-20
117 Open press All parameters Mechanical press–Safety EN 692:2005+A1:2009 2018-07-20
118 Open press All parameters Open front mechanical power presses-Testing of the accuracy GB/T 23280-2009 2018-07-20
119 Open press All parameters Open double-point press: accuracy JB/T 5199-1991 2018-07-20
120 Open press All parameters Open multi working position press: accuracy JB/T 9961-2015 2018-07-20
121Bench mechanical power presses
All parameters Bench mechanical power presses-Part1:Specification JB/T 5247.1-2011 2018-07-20
122Bench mechanical power presses
All parameters Bench mechanical power presses-Part3:Testing of the accuracy JB/T 5247.3-2011 2018-07-20
-
ISO/IEC 17025 认可证书
No. CNAS L0128
The scope of the accreditation in Chinese remains the definitive version.
第 23 页 共 187 页
№ Test ObjectItem/Parameter
Standard or Method Note Effective Date№ Item/ Parameter
123Straight-side mechanical power press
All parameters Straight-side mechanical power press-Part 2:Technical requirements JB/T 1647.2-2012(2017) 2018-07-20
124Straight-side mechanical power press
All parameters Straight-sided four-point mechanical power press-Testing of the accuracy JB/T 5200-2012 2018-07-20
125Straight-side mechanical power press
All parametersStraight sided single or two-point mechanical power presses-Testing of the accuracy GB/T 10924-2009
2018-07-20
126Closed cold extrusion presses
All parameters Closed cold extrusion presses-Specifications JB/T 2936.2-1999 2018-07-20
127
High speed precision straight side press
All parameters High speed precision straight side press-Technical requirements JB/T 10168-2015 2018-07-20
128
Bottom driven double-acting drawing presses
All parameters Bottom driven double-acting drawing presses-Part2:Specifications JB/T 8348.2-2014 2018-07-20
129
Bottom driven double-acting drawing presses
All parameters Bottom driven double-acting drawing presses-Part 1:Testing of the accuracy JB/T 8348.1-2014 2018-07-20
130 Press brakes All parameters Press brakes-Part1:Specifications JB/T 2257.1-2014 2018-07-20
131 Press brakes All parameters Hydraulic press brakes-Safety requirements GB 28243-2012 2018-07-20
132 Press brakes All parameters Plate and edge bending machines-sound limit JB 9976-1999(2009) 2018-07-20
-
ISO/IEC 17025 认可证书
No. CNAS L0128
The scope of the accreditation in Chinese remains the definitive version.
第 24 页 共 187 页
№ Test ObjectItem/Parameter
Standard or Method Note Effective Date№ Item/ Parameter
133 Press brakes All parameters Press brakes-Testing of the accuracy GB/T 14349-2011 2018-07-20
134 Plate shear All parameters Plate shear-Specifications JB/T 5197.2-2015 2018-07-20
135 Plate shear All parameters Shears-Safety requirements GB 28240-2012 2018-07-20
136 Plate shear All parameters Bar shearing machines, crocodile shearing machines and plate shearing machines-sound limit JB 9969-1999(2009) 2018-07-20
137 Plate shear All parameters Plate shear-Testing of the accuracy GB/T 14404-2011 2018-07-20
138high pressure metal diecasting units
All parameters Safety requirements for high pressure metal diecasting units GB 20906-2007 2018-07-20
139high pressure metal diecasting units
All parameters Safety of machinery-Safety requirements for pressure metal diecasting units EN 869:2006 2018-07-20
140Hot-chamber die casting machine
All parameters Hot-chamber diecasting machine -Part 3:Technical requirements JB/T 6309.3-2015 2018-07-20
141Hot-chamber die casting machine
All parameters Hot-chamber diecasting machine -Part 2:Testing of the accuracy JB/T 6309.2-2015 2018-07-20
142CNC pipe bending machines
All parameters CNC pipe bending machines-Specifications JB/T 5761.1-1999 2018-07-20
143CNC pipe bending machines
All parameters Pipe bending machines-Specifications JB/T 2671.2-1998 2018-07-20
144CNC pipe bending machines
All parameters Tube bending machines-Part 3:Testing of the accuracy JB/T 2671.3-2010 2018-07-20
-
ISO/IEC 17025 认可证书
No. CNAS L0128
The scope of the accreditation in Chinese remains the definitive version.
第 25 页 共 187 页
№ Test ObjectItem/Parameter
Standard or Method Note Effective Date№ Item/ Parameter
145Three-roll plate bending machines
All parameters Three-roll plate bending machines-Part2:Specifications JB/T 3185.2-2014 2018-07-20
146Three-roll plate bending machines
All parameters Three-roll plate bending machines-Part3:Testing of the accuracy JB/T 3185.3-2014 2018-07-20
147 Hydraulic presses All parameters Hydraulic presses-Safety requirements GB 28241-2012 2018-07-20
148 Hydraulic presses All parameters Machine Tools- Safety-Hydraulic Presses EN 693:2001 2018-07-20
149 Hydraulic presses All parameters Hydraulic presses-Specifications JB/T 3818-2014 2018-07-20
150Woodworking machines (Safety )
1 safety Woodworking machines-Safety code GB 12557-2000 GB 12557-2010 2018-07-20
1 electrical Woodworking machines-General specifications GB/T 14384-2010
Except for :dust density
2018-07-20
2 hardness Woodworking machines-General specifications GB/T 14384-2010
Except for :dust density
2018-07-20
3 temperature Woodworking machines-General specifications GB/T 14384-2010
Except for :dust density
2018-07-20
4 Rotational speed differenceWoodworking machines-General specifications GB/T 14384-2010
Except for :dust density
2018-07-20
151Woodworking machines (performance)
5 Feed difference Woodworking machines-General specifications GB/T 14384-2010
Except for :dust density
2018-07-20
-
ISO/IEC 17025 认可证书
No. CNAS L0128
The scope of the accreditation in Chinese remains the definitive version.
第 26 页 共 187 页
№ Test ObjectItem/Parameter
Standard or Method Note Effective Date№ Item/ Parameter
6 operating force Woodworking machines-General specifications GB/T 14384-2010
Except for :dust density
2018-07-20
7 sound Woodworking machines-General specifications GB/T 14384-2010
Except for :dust density
2018-07-20
8 no-load power Woodworking machines-General specifications GB/T 14384-2010
Except for :dust density
2018-07-20
9 Load test Woodworking machines-General specifications GB/T 14384-2010
Except for :dust density
2018-07-20
10 Vibration Woodworking machines-General specifications GB/T 14384-2010
Except for :dust density
2018-07-20
11 Rigidity Woodworking machines-General specifications GB/T 14384-2010
Except for :dust density
2018-07-20
152Woodworking machines(sound )
1 sound Woodworking machines- Measurement method of sound pressure level JB/T 9953-1999 2018-07-20
1 straightness Acceptance code of accuracy for woodworking machines JB/T 4171-1999 2018-07-20
2 flatness Acceptance code of accuracy for woodworking machines JB/T 4171-1999 2018-07-20
3 parallelism Acceptance code of accuracy for woodworking machines JB/T 4171-1999 2018-07-20153
Woodworking machines(accuracy)
4 equidistant Acceptance code of accuracy for woodworking machines JB/T 4171-1999 2018-07-20
-
ISO/IEC 17025 认可证书
No. CNAS L0128
The scope of the accreditation in Chinese remains the definitive version.
第 27 页 共 187 页
№ Test ObjectItem/Parameter
Standard or Method Note Effective Date№ Item/ Parameter
5 axiality Acceptance code of accuracy for woodworking machines JB/T 4171-1999 2018-07-20
6 contact ratio Acceptance code of accuracy for woodworking machines JB/T 4171-1999 2018-07-20
7 squareness Acceptance code of accuracy for woodworking machines JB/T 4171-1999 2018-07-20
8 runout Acceptance code of accuracy for woodworking machines JB/T 4171-1999 2018-07-20
9 cycle run-out Acceptance code of accuracy for woodworking machines JB/T 4171-1999 2018-07-20
10 repeatability of positioning accuracyAcceptance code of accuracy for woodworking machines JB/T 4171-1999 2018-07-20
11 positioning accuracy Acceptance code of accuracy for woodworking machines JB/T 4171-1999 2018-07-20
154Electro-discharge machines
All parameters Electro-discharge machines-Technical requirements for safeguarding GB 13567-1998 2018-07-20
155
Wire electrical-discharge machines (Reciprocating traveling type)
All parameters Wire electrical-discharge machines (Reciprocating traveling type)-Technical requirements JB/T 10082-2010 2018-07-20
156
Wire electrical-discharge machines (Reciprocating traveling type)
All parameters NC reciprocating traveling type wire electrical-discharge machines -Testing of the accuracy GB/T 7926-2015 2018-07-20
157Wire electrical-discharge machines
partial parameters Wire electrical-discharge machines (Unidirectional travelling type)-Technical requirements JB/T 5544-2012Except for :EMC 2018-07-20
-
ISO/IEC 17025 认可证书
No. CNAS L0128
The scope of the accreditation in Chinese remains the definitive version.
第 28 页 共 187 页
№ Test ObjectItem/Parameter
Standard or Method Note Effective Date№ Item/ Parameter
(Unidirectional travelling type)
158
Wire electrical-discharge machines (Unidirectional travelling type)
All parameters Wire electrical-discharge machines (Unidirectional traveling type)-Testing of the accuracy GB/T 19361-2003 2018-07-20
159
Wire electrical-discharge machines (Unidirectional travelling type)
All parameters Wire electrical-discharge machines (Unidirectional traveling type)-Testing of the accuracy ISO 14137:2000 2018-07-20
160
Sinking electro-discharge machines
partial parameters Sinking electro-discharge machines-Technical requirements JB/T 4105-2010Except for :EMC 2018-07-20
161
Sinking electro-discharge machines
All parametersDie sinking electro-discharge machines(EDM)-Testing of the accuracy-Part 1:Single column machines(cross slide type and fixed table type) GB/T 5291.1-2001
2018-07-20
162
Mechanical vibration-Balance quality requirements for rotors in a constant(rigid) state
All parametersMechanical vibration-Balance quality requirements for rotors in a constant(rigid) state-Part 1:Specification and verification of balance tolerances GB/T 9239.1-2006
Accredited only for :testing rotor under 500kg (including 500kg)
2018-07-20
163 balancing machines Description verification and evaluation of balancing machines GB/T 4201-2006 6 2018-07-20
164 Industrial 1 safety Robot for industrial environments-Safety requirements-Part 2018-07-20
-
ISO/IEC 17025 认可证书
No. CNAS L0128
The scope of the accreditation in Chinese remains the definitive version.
第 29 页 共 187 页
№ Test ObjectItem/Parameter
Standard or Method Note Effective Date№ Item/ Parameter
robots-Safety 1:Robot GB 11291.1-2011
165 Industrial robots-Safety 1 safetyRobots and robotic devices-Safety requirements for industrial robots -Part 1: Robots ISO 10218-1:2011 2018-07-20
166 Industrial robots-Safety 1 safetyIndustrial robots-Safety implementation specification GB/T 20867-2007 2018-07-20
167Industrial robots-performance
1 performance Industrial robots-Performance criteria and related test methods GB/T 12642-2013 2018-07-20
168Industrial robots-performance
1 performance Manipulating industrial robots -- Performance criteria and related test methods ISO 9283:1998 2018-07-20
169Industrial robots-performance
1 performance Industrial robot-Detailed implementation specification for performance and related test GB/T 20868-2007 2018-07-20
170Industrial robots-performance
1 performance Industrial robot-Product acceptance implementation specification JB/T 10825-2008
Except for :power adaptability, electromagnetic compatibility, environmental and climatic adaptability, vibration resistance, transportability
2018-07-20
-
ISO/IEC 17025 认可证书
No. CNAS L0128
The scope of the accreditation in Chinese remains the definitive version.
第 30 页 共 187 页
№ Test ObjectItem/Parameter
Standard or Method Note Effective Date№ Item/ Parameter
171Industrial robots-performance
1 performance Industrial robot-Acceptance rules JB/T 8896-1999
Except for :power adaptability, electromagnetic compatibility, environmental and climatic adaptability, vibration resistance, transportability
2018-07-20
172General specifications of spot
partial parameters General specifications of spot-Welding robots GB/T 14283-2008
Except for :power adaptability, electromagnetic compatibility, environmental and climatic adaptability, vibration resistance, transportabi
2018-07-20
-
ISO/IEC 17025 认可证书
No. CNAS L0128
The scope of the accreditation in Chinese remains the definitive version.
第 31 页 共 187 页
№ Test ObjectItem/Parameter
Standard or Method Note Effective Date№ Item/ Parameter
lity
173laser processing robots
partial parameters General specifications of laser processing robots GB/T 20722-2006
Except for :power adaptability, electromagnetic compatibility, environmental and climatic adaptability, vibration resistance, transportability
2018-07-20
174 arc welding robot partial parameters General specifications of arc welding robots GB/T 20723-2006
Except for :power adaptability, electromagnetic compatibility, environmental and climatic adaptability, vibration
2018-07-20
-
ISO/IEC 17025 认可证书
No. CNAS L0128
The scope of the accreditation in Chinese remains the definitive version.
第 32 页 共 187 页
№ Test ObjectItem/Parameter
Standard or Method Note Effective Date№ Item/ Parameter
resistance, transportability
175 assembly robots partial parameters General specifications of assembly robots GB/T 26154-2010
Except for :power adaptability, electromagnetic compatibility, environmental and climatic adaptability, vibration resistance, transportability
2018-07-20
176 assembly robots partial parametersGeneral specifications of assembly robots JB/T 5064-1991 5.6,6.7
Except for :power adaptability, electromagnetic compatibility, environmental and climatic adaptability
2018-07-20
-
ISO/IEC 17025 认可证书
No. CNAS L0128
The scope of the accreditation in Chinese remains the definitive version.
第 33 页 共 187 页
№ Test ObjectItem/Parameter
Standard or Method Note Effective Date№ Item/ Parameter
, vibration resistance, transportability
177 transport robots partial parameters General specifications of transport robots JB/T 5063-2014
Except for :power adaptability, electromagnetic compatibility, environmental and climatic adaptability, vibration resistance, transportability
2018-07-20
178 painting robot partial parameters General specifications of spray-painting robot JB/T 9182-2014
Except for :power adaptability, electromagnetic compatibility, environmental and climatic
2018-07-20
-
ISO/IEC 17025 认可证书
No. CNAS L0128
The scope of the accreditation in Chinese remains the definitive version.
第 34 页 共 187 页
№ Test ObjectItem/Parameter
Standard or Method Note Effective Date№ Item/ Parameter
adaptability, vibration resistance, transportability
179
Flexible manufacturing system of off-line programming robots
partial parameters Flexible manufacturing system of off-line programming robots-Part 1:General requirements GB/T 26153.1-2010
Except for :power adaptability, electromagnetic compatibility, environmental and climatic adaptability, vibration resistance, transportability
2018-07-20
180
Flexible manufacturing system of off-line programming robots
partial parameters Flexible manufacturing system of off-line programming robots-Part 2:Belt grinding manufacturing system GB/T 26153.2-2010
Except for :power adaptability, electromagnetic compatibility, environmental and
2018-07-20
-
ISO/IEC 17025 认可证书
No. CNAS L0128
The scope of the accreditation in Chinese remains the definitive version.
第 35 页 共 187 页
№ Test ObjectItem/Parameter
Standard or Method Note Effective Date№ Item/ Parameter
climatic adaptability, vibration resistance, transportability
General machinery and equipment
1 Thickness Specification for minimal thickness of the shell of valves GB/T 26640-2011 3、4 PN≤40MPa 2018-07-20
2 Shell Test Industrial valves-Pressure testing GB/T 13927-2008 5 PN≤40MPa 2018-07-20
3 Back seat Test Industrial valves-Pressure testing GB/T 13927-2008 5 PN≤40MPa 2018-07-20
4 seat Test Industrial valves-Pressure testing GB/T 13927-2008 5 PN≤40MPa 2018-07-20
5 Shell Test Valve inspection and testing GB/T 26480-2011 5.3 PN≤40MPa 2018-07-20
6 Back seat Test Valve inspection and testing GB/T 26480-2011 5.3 PN≤40MPa 2018-07-20
7 Low pressure seat Test Valve inspection and testing GB/T 26480-2011 5.3 PN≤40MPa 2018-07-20
8 High pressure seat Test Valve inspection and testing GB/T 26480-2011 5.3 PN≤40MPa 2018-07-20
9High pressure test of double block and bleed
Valve inspection and testing GB/T 26480-2011 5.3 PN≤40MPa 2018-07-20
10 Mark content Industrial valves-marking GB/T 12220-2015 3 2018-07-20
1 Valve
11 Mark method Industrial valves-marking GB/T 12220-2015 4 2018-07-20
-
ISO/IEC 17025 认可证书
No. CNAS L0128
The scope of the accreditation in Chinese remains the definitive version.
第 36 页 共 187 页
№ Test ObjectItem/Parameter
Standard or Method Note Effective Date№ Item/ Parameter
12 Shell Test General requierments for industrial steel valves GB/T 12224-2015 7 PN≤40MPa 2018-07-20
13 seat Test General requierments for industrial steel valves GB/T 12224-2015 7 PN≤40MPa 2018-07-20
14 Performance requirementGeneral requirement for: pressure reducing valves GB/T 12244-2006 6 2018-07-20
15 Performance requirementMethods of performance test for pressure reducing valves GB/T 12245-2006 6 2018-07-20
16 Face-to-face dimensionMetal valves-Face to face,end to end,center to face and ceter to end dimensions GB/T 12221-2005 4 2018-07-20
17 Surface quality evalutionValves cast steel visual quality reqrirements JB/T 7927-2014(2017) 3,4,5 2018-07-20
18 Shell Test Valve Inspection and Testing API STD 598-2016 6 PN≤40MPa 2018-12-28
19 High pressure seat Test Valve Inspection and Testing API STD 598-2016 6 PN≤40MPa 2018-12-28
20 Low pressure seat Test Valve Inspection and Testing API STD 598-2016 6 PN≤40MPa 2018-12-28
21 Back seat Test Valve Inspection and Testing API STD 598-2016 6 PN≤40MPa 2018-12-28
22 Pressure test Specification for Pipeline and Piping Valves API SPEC 6D CHINESE-2014 9 PN≤40MPa 2018-12-28
23flow coefficient and flow resistance coefficient
Valves-Test method of flow coefficient and flow resistance coefficient GB/T 30832-2014 4,5,6,7 PN≤40MPa 2018-07-20
2 Flanged iron gate valves All ParametersGeneral purpose industrial valves--Flanged iron gate valves GB/T 12232-2005 PN≤40MPa 2018-07-20
3Casting iron globe valves and lift check
All Parameters General purpose industrial valves--Casting iron globe valves and lift check valves GB/T 12233-2006 PN≤40MPa 2018-07-20
-
ISO/IEC 17025 认可证书
No. CNAS L0128
The scope of the accreditation in Chinese remains the definitive version.
第 37 页 共 187 页
№ Test ObjectItem/Parameter
Standard or Method Note Effective Date№ Item/ Parameter
valves
4
Bolted bonnet steel gate valves for petroleum and natural gas industries
All Parameters Bolted bonnet steel gate valves for petroleum and natural gas industries GB/T 12234-2007 PN≤40MPa 2018-07-20
5Steel globe valves and lift check valve
All Parameters Steel globe valves and lift check valve for petroleum,petrochemical and allied industries GB/T 12235-2007 PN≤40MPa 2018-07-20
6 Steel swing check valve All ParametersSteel swing check valve for petroleum,petrochemical and allied industries GB/T 12236-2008 PN≤40MPa 2018-07-20
7
Steel ball valves for petroleum,petrochemical and allied industries
All Parameters Steel ball valves for petroleum,petrochemical and allied industries GB/T 12237-2007 PN≤40MPa 2018-07-20
8
Flanged and wafer resilient seal butterfly valves
All Parameters Flanged and wafer resilient seal butterfly valves GB/T 12238-2008 PN≤40MPa 2018-07-20
9
Diaphragm valves made of metallic materials
All Parameters Industrial valves--Diaphragm valves made of metallic materials GB/T 12239-2008 PN≤40MPa 2018-07-20
10Cast iron swing check valves
All Parameters Cast iron swing check valves GB/T13932-2016 PN≤40MPa 2018-07-20
-
ISO/IEC 17025 认可证书
No. CNAS L0128
The scope of the accreditation in Chinese remains the definitive version.
第 38 页 共 187 页
№ Test ObjectItem/Parameter
Standard or Method Note Effective Date№ Item/ Parameter
11 Iron plug valves All Parameters Iron plug valves GB/T 12240-2008 PN≤40MPa 2018-07-20
12Cast iron and copper alloy ball valves
All Parameters Cast iron and copper alloy ball valves GB/T 8464-2008 PN≤40MPa 2018-07-20
13 pipeline valves All Parameters Specification of pipeline valves GB/T 19672-2005 PN≤40MPa 2018-07-20
14 Wafer type check valve All Parameters Wafer type check valve JB/T 8937-2010(2017) PN≤40MPa 2018-07-20
15 Blow-down valves All Parameters JB/T 6900-1993(2009) PN≤40MPa 2018-07-20
16 Hydraulic control valve All Parameters Hydraulic control valve CJ/T 219-2017 PN≤40MPa 2018-12-28
17Pilot-operated reducing valves
All Parameters Pilot operated pressure reducing valves GB/T 12246-2006 PN≤40MPa 2018-07-20
18
Resilient-seated gate valves for water supply and drainage service
All Parameters Resilient-seated gate valves for water supply and drainage service CJ/T 216-2013 PN≤40MPa 2018-07-20
19Metallic sealing butterfly valve
All Parameters Metallic sealing butterfly valve JB/T 8527-2015(2017) PN≤40MPa 2018-07-20
20
Butterfly valves for water supply and drainage
Part of Parameters Butterfly valves for water supply and drainage CJ/T 261-2015
PN≤40MPa,Except for: sanitation、non-
2018-07-20
-
ISO/IEC 17025 认可证书
No. CNAS L0128
The scope of the accreditation in Chinese remains the definitive version.
第 39 页 共 187 页
№ Test ObjectItem/Parameter
Standard or Method Note Effective Date№ Item/ Parameter
destructive testing
21Tee strainers for fluids for pipes
All Parameters Tee strainers for fluids for pipes GB/T 14382-2008 PN≤40MPa 2018-07-20
22 Flexible rubber joint All Parameters Flexible rubber joint CJ/T 208-2005 PN≤40MPa 2018-07-20
23 grooved couplings All Parameters grooved couplings CJ/T 156-2001 PN≤40MPa 2018-07-20
24
Double check valve backflow prevention assembly
All Parameters Double check valve backflow prevention assembly CJ/T160-2010 PN≤40MPa 2018-07-20
25
metallic bellows expansion joints
All Parameters General specification of metallic bellows expansion joints GB/T 12777-2008 PN≤40MPa 2018-07-20
26 Eccentric semi-ball valve Part of Parameters Eccentric semi-ball valve CJ/T 283-2017
PN≤40MPa,Except for: sanitation
2018-12-28
27 Eccentric semi-ball valve Part of Parameters Eccentric semi-ball valve GB/T 26146-2010
PN≤40MPa,Except for: non-destructive testing
2018-07-20
28 Steel plug valves Part of Parameters Steel plug valvesGB/T 22130-2008 GB/T 22130-2008
PN≤40MPa,Except for: Fire resistance
2018-07-20
-
ISO/IEC 17025 认可证书
No. CNAS L0128
The scope of the accreditation in Chinese remains the definitive version.
第 40 页 共 187 页
№ Test ObjectItem/Parameter
Standard or Method Note Effective Date№ Item/ Parameter
test
29 Metal-seated ball valve Part of Parameters Metal-seated ball valve GB/T 21385-2008
PN≤40MPa,Except for: Fire resistance test
2018-07-20
30Non-slam nozzle check valve
Part of Parameters Non-slam nozzle check valve CJ/T 255-2007
PN≤40MPa,Except for: sanitation
2018-07-20
31
Resilient-seated gate valves for water supply service
Part of Parameters Resilient-seated gate valves for water supply service GB/T 24924-2010
PN≤40MPa,Except for: sanitation
2018-07-20
32Parallel plane disc gate valves
All Parameters Parallel plane disc gate valves GB/T 23300-2009 PN≤40MPa 2018-07-20
33 Air inbreathe-release valve All ParametersCompound quick air inbreathe-release valve for water supply pipeline CJ/T 217-2013 PN≤40MPa 2018-07-20
34slow closure type check valve
All Parameters General specification of slow closure type check valve for water supply and sewerage CJ/T 154-2001 PN≤40MPa 2018-07-20
35 Flange All Parameters Pipeline valves, technical delivery conditions JB/T 74-2015(2017) PN≤40MPa 2018-07-20
36 Compact steel valves All Parameters Compact steel valves JB/T 7746-2006 PN≤40MPa 2018-07-20
37 Axial flow check valve All Parameters Axial flow check valve GB/T 21387-2008 PN≤40MPa 2018-07-20
-
ISO/IEC 17025 认可证书
No. CNAS L0128
The scope of the accreditation in Chinese remains the definitive version.
第 41 页 共 187 页
№ Test ObjectItem/Parameter
Standard or Method Note Effective Date№ Item/ Parameter
38
Liner fluoroplatics for flanged and wafer steel butterfly valve
All Parameters Liner fluoroplatics for flanged and wafer steel butterfly valve GB/T 26144-2010 PN≤40MPa 2018-07-20
39 Drain valve All Parameters Drain valve GB/T 26145-2010 PN≤40MPa 2018-07-20
40Pilot control pressure reducing valve
All Parameters Pilot control pressure reducing valve CJ/T 262-2016 PN≤40MPa 2018-07-20
41Piping compensatory couplings
Part of Parameters Piping compensatory couplings GB/T 12465-2017
PN≤40MPa,Except for :sanitation and Fire resistance test
2018-12-28
42corrugated metal hose assemblies
Part of Parameters General specification for corrugated metal hose assemblies GB/T 14525-2010
PN≤40MPa,Except for : non-destructive testing
2018-07-20
43
Automatic sprink system:Convention valve
All Parameters Automatic sprink system-Part 6:Convention valve GB 5135.6-2018 PN≤40MPa 2018-12-28
44 Valves for power station Part of Parameters Valves for power station NB/T 47044-2014
PN≤40MPa,Except for: High temperature
2018-07-20
-
ISO/IEC 17025 认可证书
No. CNAS L0128
The scope of the accreditation in Chinese remains the definitive version.
第 42 页 共 187 页
№ Test ObjectItem/Parameter
Standard or Method Note Effective Date№ Item/ Parameter
,non-destructive testing
45 Hydraulic control valve All Parameters Hydraulic control valve JB/T 10674-2006 PN≤40MPa 2018-07-20
46 Metal-sealed unfurled valve All Parameters Metal-sealed unfurled valve JB/T 10673-2006 PN≤40MPa 2018-07-20
47Bellows sealing steel globe valve
Part of Parameters Bellows sealing steel globe valve JB/T 11150—2011
PN≤40MPa,Except for: non-destructive testing
2018-07-20
48
Steel gate, globe and check valve for the petroleum and natural gas industries(for sizes DN100 and smaller)
Part of Parameters Steel gate, globe and check valve for the petroleum and natural gas industries(for sizes DN100 and smaller) GB/T 28776—2012
PN≤40MPa,Except for: High temperature
2018-07-20
49Bellows sealing steel gate valve
All Parameters Bellows sealing steel gate valve JB/T 11487-2013(2017) PN≤40MPa 2018-07-20
50Slow closure butterfly check valve
All Parameters Slow closure butterfly check valve CJ/T 282-2016 PN≤40MPa 2018-07-20
51
Pneumatic industrial process control valves
All Parameters Pneumatic industrial process control valves GB/T 4213-2008 PN≤40MPa 2018-07-20
-
ISO/IEC 17025 认可证书
No. CNAS L0128
The scope of the accreditation in Chinese remains the definitive version.
第 43 页 共 187 页
№ Test ObjectItem/Parameter
Standard or Method Note Effective Date№ Item/ Parameter
All Parameters Rotodynamic pumps—Hydraulic performance acceptance tests—Grades 1 、2 and 3 GB/T 3216-2016
Accredited only for:Flow0-800m3/hHead≤250mPower≤150kW
2018-07-20
1 Flow Rotodynamic pumps—Hydraulic performance acceptance tests—Grades 1 、2 and 3 GB/T 3216-2016 4.4 2018-07-20
2 Head Rotodynamic pumps—Hydraulic performance acceptance tests—Grades 1 、2 and 3 GB/T 3216-2016 4.4 2018-07-20
3 Pump efficiency Rotodynamic pumps—Hydraulic performance acceptance tests—Grades 1 、2 and 3 GB/T 3216-2016 4.4 2018-07-20
4 Power Rotodynamic pumps—Hydraulic performance acceptance tests—Grades 1 、2 and 3 GB/T 3216-2016 4.4 2018-07-20
52 pump
5 The spirit eclipse experimentsRotodynamic pumps—Hydraulic performance acceptance tests—Grades 1 、2 and 3 GB/T 3216-2016 5.8 2018-07-20
53 Submersible pumps Part of items Submersible pumps GB/T 12785-2014
Accredited only for:Flow0-140m3/hHead≤100mPower≤150kWExcept for :Test of axial force
2018-07-20
-
ISO/IEC 17025 认可证书
No. CNAS L0128
The scope of the accreditation in Chinese remains the definitive version.
第 44 页 共 187 页
№ Test ObjectItem/Parameter
Standard or Method Note Effective Date№ Item/ Parameter
1
The electrical engineering settles the son rounds a measurement for to the machine hull insulating electric resistance( measure the cold only)
Submersible pumps GB/T 12785-2014 6 2018-07-20
2
The electrical engineering settles the son rounds a measurement for under the actual and cold direct current electric resistance
Submersible pumps GB/T 12785-2014 7 2018-07-20
3 Bearing the electric voltage experiments Submersible pumps GB/T 12785-2014 14 2018-07-20
4
The biggest grain passes the measurement of the ability
Submersible pumps GB/T 12785-2014 18 2018-07-20
5The sum settles the head of the flow bottom
Submersible pumps GB/T 12785-2014 4 2018-07-20
6The sum settles the pump efficiency of the flow bottom
Submersible pumps GB/T 12785-2014 4 2018-07-20
7 The temperature rises to experiment Submersible pumps GB/T 12785-2014 9 2018-07-20
8 The electrical Submersible pumps GB/T 12785-2014 12 2018-07-20
-
ISO/IEC 17025 认可证书
No. CNAS L0128
The scope of the accreditation in Chinese remains the definitive version.
第 45 页 共 187 页
№ Test ObjectItem/Parameter
Standard or Method Note Effective Date№ Item/ Parameter
engineering blocks up to turn to experiment
9
The electric motor gets empty to carry the characteristic measurement
Submersible pumps GB/T 12785-2014 8 2018-07-20
10
The electrical engineering is biggest to turn the measurement
Submersible pumps GB/T 12785-2014 13 2018-07-20
11
The electrical engineering least turns the measurement
Submersible pumps GB/T 12785-2014 13 2018-07-20
12
Pump within the scope of 0.7-1.3 times sums settle the discharge the measurement of the stalk power
Submersible pumps GB/T 12785-2014 10.3.1 2018-07-20
13
The measurement of the electrical engineering noise voice
Submersible pumps GB/T 12785-2014 15 2018-07-20
14
The measurement of the electrical engineering vibration
Submersible pumps GB/T 12785-2014 16 2018-07-20
15 The hot insulates Submersible pumps GB/T 12785-2014 10.3.2 2018-07-20
-
ISO/IEC 17025 认可证书
No. CNAS L0128
The scope of the accreditation in Chinese remains the definitive version.
第 46 页 共 187 页
№ Test ObjectItem/Parameter
Standard or Method Note Effective Date№ Item/ Parameter
the measurement of the electric resistance
16
The full circle pounds at to bear the electric voltage experiments
Submersible pumps GB/T 12785-2014 14.3 2018-07-20
All Parameters Tesing methods for screw pumps JB/T 8091-2014
Accredited only for:Flow0-140m3/hHead≤100mPower≤150kW
2018-07-20
1 running experiment Tesing methods for screw pumps JB/T 8091-2014 4.1 2018-07-20
2 valve experiment Tesing methods for screw pumps JB/T 8091-2014 4.1 2018-07-20
3 performance experiment Tesing methods for screw pumps JB/T 8091-2014 4.1 2018-07-20
4 NPSH experiment Tesing methods for screw pumps JB/T 8091-2014 4.1 2018-07-20
5 vibration experiment Tesing methods for screw pumps JB/T 8091-2014 4.1 2018-07-20
6 noise experiment Tesing methods for screw pumps JB/T 8091-2014 4.1 2018-07-20
54 screw pumps
7 other experiment Tesing methods for screw pumps JB/T 8091-2014 4.1 2018-07-20
55 pump 1 vibration Methods of measuring and evaluating vibration of pumps GB/T 29531-2013 6 2018-07-20
-
ISO/IEC 17025 认可证书
No. CNAS L0128
The scope of the accreditation in Chinese remains the definitive version.
第 47 页 共 187 页
№ Test ObjectItem/Parameter
Standard or Method Note Effective Date№ Item/ Parameter
2 noise Methods of measuring and evaluating noise of pumps GB/T 29529-2013 10 2018-07-20
56 centrifugal pumps All ParametersTechnical specifications centrifugal pumps-class II GB/T 5656-2008
Accredited only for:Flow0-800m3/hHead≤250mPower≤150kW
2018-07-20
57 centrifugal pumps All ParametersTechnical specifications centrifugal pumps-class III GB/T 5657-2013
Accredited only for:Flow0-800m3/hHead≤250mPower≤150kW
2018-07-20
58Water submersible motor-pumps
All Parameters Water submersible motor-pumps GB/T 24674-2009
Accredited only for:Flow0-140m3/hHead≤100mPower≤150kW
2018-07-20
59 Submersible motor-pumps All Parameters Submersible motor-pumps GB/T 25409-2010
Accredited only for:Flow0-140m3/hHead≤100
2018-07-20
-
ISO/IEC 17025 认可证书
No. CNAS L0128
The scope of the accreditation in Chinese remains the definitive version.
第 48 页 共 187 页
№ Test ObjectItem/Parameter
Standard or Method Note Effective Date№ Item/ Parameter
mPower≤150kW
60 Diving screw pump All Parameters Diving screw pump JB/T 8645-2011(2017)
Accredited only for:Flow0-140m3/hHead≤100mPower≤150kW
2018-07-20
61Submersible pumps for deep well
All Parameters Submersible pumps for deep well GB/T 2816-2014
Accredited only for:Flow0-140m3/hHead≤100mPower≤150kW
2018-07-20
62Long shaft deep well pump
All Parameters Long shaft deep well pump GB/T 2816-2014
Accredited only for:Flow0-140m3/hHead≤100mPower≤150kW
2018-07-20
63Single rank single suction acentric pump
All Parameters Technical specifications centrifugal pumps-class II GB/T 5656-2008
Accredited only for:Flow0-800m3/h
2018-07-20
-
ISO/IEC 17025 认可证书
No. CNAS L0128
The scope of the accreditation in Chinese remains the definitive version.
第 49 页 共 187 页
№ Test ObjectItem/Parameter
Standard or Method Note Effective Date№ Item/ Parameter
Head≤250mPower≤150kW
64Plastic centrifugal pumps
All Parameters Plastic centrifugal pumps JB/T 8688-2013(2017)
Accredited only for:Flow0-800m3/hHead≤250mPower≤150kW
2018-07-20
65 Magnetic force acentric pump All ParametersTechnical specifications centrifugal pumps-class II GB/T 5656-2008
Accredited only for:Flow0-800m3/hHead≤250mPower≤150kW
2018-07-20
66 Shield acentric pump All ParametersTechnical specifications centrifugal pumps-class II GB/T 5656-2008
Accredited only for:Flow0-800m3/hHead≤250mPower≤150kW
2018-07-20
67 Hot-water acentric pump All ParametersTechnical specifications centrifugal pumps-class I GB/T 16907-2014
Accredited only for:Flow0-
2018-07-20
-
ISO/IEC 17025 认可证书
No. CNAS L0128
The scope of the accreditation in Chinese remains the definitive version.
第 50 页 共 187 页
№ Test ObjectItem/Parameter
Standard or Method Note Effective Date№ Item/ Parameter
800m3/hHead≤250mPower≤150kW
68Centrifugal pumps for petrochemical
All Parameters Centrifugal pumps for petroleum petrochemical and natural gas industries GB/T 3215-2007
Accredited only for:Flow0-800m3/hHead≤250mPower≤150kW
2018-07-20
69 Multi- rank acentric pump All ParametersTechnical specifications centrifugal pumps-class I GB/T 16907-2014
Accredited only for:Flow0-800m3/hHead≤250mPower≤150kW
2018-07-20
70 Multi- rank acentric pump All ParametersHigh pressure boiler feed water pump technology conditions JB/T 8059-2008
Accredited only for:Flow0-800m3/hHead≤250mPower≤150kW
2018-07-20
71 Inline type centrifugal All Parameters Inline type centrifugal pumps JB/T 6878-2006Accredited only for: 2018-07-20
-
ISO/IEC 17025 认可证书
No. CNAS L0128
The scope of the accreditation in Chinese remains the definitive version.
第 51 页 共 187 页
№ Test ObjectItem/Parameter
Standard or Method Note Effective Date№ Item/ Parameter
pumps Flow0-800m3/hHead≤250mPower≤150kW
72centrifugal pump for fresh water
All ParametersLimited values of energy efficiency and evaluating values of energy conservation of centrifugal pump for fresh water GB 19762-2007
Accredited only for:Flow0-800m3/hHead≤250mPower≤150kW
2018-07-20
73Miniature centrifugal pump
All Parameters Miniature centrifugal pump JB/T 5415-2013(2017)
Accredited only for:Flow0-800m3/hHead≤250mPower≤150kW
2018-07-20
74
The light small single grade centrifugal pump
All Parameters The light small single grade centrifugal pump JB/T 6663-2007
Accredited only for:Flow0-800m3/hHead≤250mPower≤150kW
2018-07-20
-
ISO/IEC 17025 认可证书
No. CNAS L0128
The scope of the accreditation in Chinese remains the definitive version.
第 52 页 共 187 页
№ Test ObjectItem/Parameter
Standard or Method Note Effective Date№ Item/ Parameter
75
Irrigation and drainage pumps and pump units
All Parametersagriculture and forestry machinery safety technical requirements tractors and 8 parts: irrigation and drainage pumps and pump units GB 10395.8-2006
Accredited only for:Flow0-800m3/hHead≤250mPower≤150kW
2018-07-20
76
Compact silent inline deepwell pump water booster equipment for non-negative
All Parameters Compact silent inline deepwell pump water booster equipment for non-negative CJ/T 440-2013
Except for :Health performance、electromagnetic performance
2018-07-20
77
Water supply equipment of low voice additive pipe pressure
All Parameters Water supply equipment of low voice additive pipe pressure CJ/T 444-2014
Except for: Health performance、electromagnetic performance
2018-07-20
78
Non-negative pressure water supply equipment for water supply
All Parameters Non-negative pressure water supply equipment for water supply network booster pump station in cities and towns CJ/T 415-2013
Except for: Health performance、
2018-07-20
-
ISO/IEC 17025 认可证书
No. CNAS L0128
The scope of the accreditation in Chinese remains the definitive version.
第 53 页 共 187 页
№ Test ObjectItem/Parameter
Standard or Method Note Effective Date№ Item/ Parameter
network booster pump station in cities and towns
electromagnetic performance
79 Vertical mixed flow pumps All Parameters Vertical mixed flow pumps JB/T 10812-2007
Accredited only for:Flow0-800m3/hHead≤250mPower≤150kW
2018-07-20
80
Non-negative pressure water supply equipment
All Parameters Non-negative pressure water supply equipment CJ/T 265-2016
Except for :Health performance、electromagnetic performance
2018-07-20
81
Non-negative pressure water supply equipment of integration and intelligence
All Parameters Non-negative pressure water supply equipment of integration and intelligence CJ/T 381-2011
Except for: Health performance、electromagnetic performance
2018-07-20
-
ISO/IEC 17025 认可证书
No. CNAS L0128
The scope of the accreditation in Chinese remains the definitive version.
第 54 页 共 187 页
№ Test ObjectItem/Parameter
Standard or Method Note Effective Date№ Item/ Parameter
82Additive pipe pressure water supply devices
All Parameters Additive pipe pressure water supply devices CJ/T 254-2014
Except for: Health performance、electromagnetic performance
2018-07-20
83
Oil seperating and upgrading integrative equipment
All Parameters Oil seperating and upgrading integrative equipment CJ/T 410-2012
Except for :
material、water quality performance
2018-07-20
84
Non-negative pipe system pressure-increasing water supply equipment
All Parameters Non-negative pipe system pressure-increasing water supply equipment GB/T 26003-2010
Except for: Health performance、electromagnetic performance
2018-07-20
85
Technical conditions of sewage-elevating device
All Parameters Technical conditions of sewage-elevating device CJ/T 380-2011
Except for: material performance
2018-07-20
-
ISO/IEC 17025 认可证书
No. CNAS L0128
The scope of the accreditation in Chinese remains the definitive version.
第 55 页 共 187 页
№ Test ObjectItem/Parameter
Standard or Method Note Effective Date№ Item/ Parameter
86
Tank type non-negative pressure water supply devices
All Parameters Tank type non-negative pressure water supply devices CJ/T 302-2008
Except for: Health performance、electromagnetic performance
2018-07-20
87
Grease-water separator for restaurant wastewater
All Parameters Grease-water separator for restaurant wastewater CJ/T 295-2015
Except for: material、water quality performance
2018-07-20
88
Steady pressure compensation type non-negative pressure water supply devi