Multi-Tech Industrial Brochure
-
Upload
bradyn-wallis -
Category
Documents
-
view
63 -
download
11
Transcript of Multi-Tech Industrial Brochure
Industrial Product CatalogueQUALITY PRODUCTS TO SERVE YOUR INDUSTRYQUALITY PRODUCTS TO SERVE YOUR INDUSTRY
®
M I N I N G A N D I N D U S T R I A LM I N I N G A N D I N D U S T R I A LM I N I N G A N D I N D U S T R I A LM I N I N G A N D I N D U S T R I A LM I N I N G A N D I N D U S T R I A L
®
☎
View our products online at www.multi-tech.net.au
FREECALL 1800 646 277
OUR MISSION
‘To consistently create leading poly products which exceed our customer’s expectations in
quality, delivery and value for money through continuous improvement and customer service‘
OUR VISION
‘To be the consumer’s ultimate choice for industrial poly products’
OUR VALUES
‘Reliability - Assurance - Promise - Innovation - Dignity‘
WELCOME to Multi-Tech® Industrial Products!
• Mining Industry • Civil Works • Drilling & Exploration
• Wastewater Treatment • Chemical Processing • Oil & Gas
Multi-Tech® is a brand that was born in answer to the ever increasing demand for products and services within the industrial resources sector. Multi-Tech® is a subsidiary division of the established company Rapid Plastics (WA) which has been in operating for nigh on two decades and has an integral founding throughout Western Australia supported by its vast network of supporting distributors and agents.
Multi-Tech® Industrial Products cover a diverse range including water and chemical storage and cartage, fire fighting protection equipment, diesel fuel storage and transport, hose floatation and septic waste tank systems. These products are successfully operating and supported currently throughout the country in the following sectors;
Creative innovation is a strong value ingrained within the corporation’s culture and constant improvement and design
in answer to customers’ requirements are paramount in the company’s vision.
Support, reliability and service are recognised as vital factors for our clients and with Multi-Tech®, you are guaranteed that we will be with you every step of the way.
“YOU are our focus and we do what we say we’ll do”
You can also be confident in knowing you are dealing with a company which is certified to international quality management standard ISO9001:2008 to provide you the utmost assurance of quality, good product value and ongoing committal to continuous improvement.
So please enjoy the latest edition of our product catalogue, and please visit us on the web at www.multi-tech.net.au for the latest information and updates!
We look forward to dealing with you soon!
Best regards, Management
3I ndus t r i a l P r oduc t Ca t a l ogue
M I N I N G A N D I N D U S T R I A L
CONTENTS
Poly Water Storage Tanks 4-6Deliveries and Installation 7Flatwalled and Undergound Water Tanks 8Tank Stands 9Process Tanks 10-11Poly Cartage Tanks 12-13Ball Baffle System® 14 Liquid Cartage Skidmount Units 15Firefighter Units and Trailers 16-17Diesel Trailed Transport Equipment 18-20Adblue® Transport Equipment 21 Diesel Transfer Equipment and Pump Kits 22Flow Meters, Diesel Hose Reels and Auto Shut-Off Nozzles 23Water Pumps, Conveyor Hood Systems & Mud Tubs 24Pipe Floats 25Septic Tanks 26Leach Drain Systems 27Ablution Building Waste Tank System 28Portable Pressure Tank Systems 29Handling Equipment 30
Unique Designs. Tried & Proven.
®
_____________________________
Product BenefitsMulti-Tech® products are manufactured from the highest quality materials conforming to Australian standards. These products are strong, lightweight, UV resistant and exceptionally durable.
_____________________________
Product SpecificationsAll specifications are subject to change in line with on-going improvements.
_____________________________
Product Design ProtectionMany of Multi-Tech® products are subject of an Australian Patent and pending design registration.
_____________________________
Sizes
All sizes, measurements and capacities throughout this brochure are only approximate due to the variable shrinkage nature of polyethylene during manufacture.
_____________________________
Placing Your OrderWe have a diverse network of distributors throughout Western Australia. Contact us on 1800 646 277 or [email protected]
_____________________________
WarrantyAll our products are guaranteed against faulty workmanship and carry a warranty.
_____________________________
DisclaimerAll recommendations within this sales catalogue are intended as suggestions only. Multi-Tech® does not take any responsibility for the suitability of any product for the use it is given.
_____________________________
Trademarks & Copyright© Rapid Plastics (WA) Pty Ltd 2012. This publication is copyrighted to Rapid Plastics (WA) Pty Ltd.
® Rapid Plastics (WA), Multi-tech Industrial Products & Multi-tech Tanks are registered trademarks of Rapid Plastics (WA) Pty Ltd.
®®
POLY WATER STORAGE TANKS
P R E M I U M T A N K R A N G E
RT 9000
RT 22500
CODE CAPACITYDIAMETER
(mm)
WALL HEIGHT
(mm)
TOTAL HEIGHT
(mm)
OVERFLOW POSITION
(mm)(litres) (gallons)
RT 250 250 55 600 1000 1100 3, 6, 9 OR 12
RT 1000 1000 220 1000 1300 1500 3, 6, 9 OR 12
RT 2500 2500 550 1400 1750 2000 3, 6, 9 OR 12
RT 3500 3500 750 1600 1800 2100 3, 6, 9 OR 12
RT 4500 4500 1000 1850 1800 2100 3, 6, 9 OR 12
RT 4500S 4500 1000 2400 1050 1400 3, 6, 9 OR 12
RT 9000 9000 2000 2400 2050 2400 3, 6, 9 OR 12
RT 9000S 9000 2000 2950 1400 1800 3, 6, 9 OR 12
RT 9500 9500 2100 2600 1800 2150 3, 6, 9 OR 12
RT 13500 13500 3000 2950 1900 2300 3, 6, 9 OR 12
RT 22500 22500 5000 3550 2350 2950 3, 6, 9 OR 12
RT 32000 32000 7000 3950 2400 3100 2, 3.30, 5, 7, 8.30, 10 or 12
RT 45000 45000 10000 Tank Combination (2 x RT 22500)Tank Combination (2 x RT 32000)RT 64000 64000 14000
CORRUGATED POLY DOMESTIC WATER TANKS
ABOVE TANK DESIGNS ARE ALL AVAILABLE IN THE CHEMICAL TANK RANGE (SEE PAGES 10-11)
Features
• One piece construction
• Attractive Heritage design
• Corrugated for strength and traditional appearance
• UV stabilised to withstand our harsh climate
• Durable and impact resistant polyethylene for long life
• Self supporting lid design eliminates need for centre support pole
• Available in all colours (see colour chart - page 6)
RT 4500SRT 2500 RT 250
RT 9500
5I ndus t r i a l P r oduc t Ca t a l ogue
M I N I N G A N D I N D U S T R I A L
5I ndus t r i a l P r oduc t Ca t a l ogue
TANK ORDERING CHECK LIST:❍ a. Dimensions of rainwater tank?
❍ b. Fittings supplied with tank?
❍ c. Position of fittings?
❍ d. Selected tank colour?
❍ e. Other accessories required?
❍ f. Clearance available at property (large tanks only)?
❍ g. Clear directions for truck driver (large tanks only)?
❍ h. Specified ideal time frame for requiring tank?
INLET / STRAINER
Tank 1
121
2
3
4
56
11
10
9
8
7
INLET / STRAINER
Tank 2
121
2
3
4
11
10
9
5
8
76
• Brass Inlet/Overflow (BSP external thread) 32mm-50mm
• Leaf Strainer (In Manhole Cover)
STANDARD WITH ALL TANKS
OPTIONAL EXTRAS:
•
Mark clearly on the diagrams your preferred overflow position. Brass outlets can be placed in any position on flat skirt of tank.
• Brass Outlet (BSP external thread) 32mm (RT250-RT1000) 40mm (RT2500-RT32000)• Ball Valve • Twist Lock Manhole Cover
• PVC Mesh Overflow 90mm (across whole range)
• Brass Outlet • Brass Outlet
POLY WATER STORAGE TANKS
• LeafS(In ManholeCover)
RT 9000SRT 3500 RT 1000RT 4500RT 13500
RT 32000
®
W A T E R T A N K F E A T U R E S
POLY WATER STORAGE TANKS
Mist Green
(Pale Eucalypt®)
Wheat
(Harvest®)
Slate Grey
(Woodland Grey®)
Rivergum
(Wilderness®)
Heritage Red
(Manor Red®)
Merino
(Paperbark®)
Heritage Green
(Cottage Green®)
Mountain Blue
(Deep Ocean®)
Beige Smooth Cream
(Classic CreamTM)
Torris Blue Black
(Night SkyTM)
Optional COLORBOND® colours are avail-able but may be subject to surcharge and/or delivery delay. Due to printing differences, some colours may vary. COLORBOND® and colour names are registered trademarks of Blue Scope Steel Ltd. ™Colour names are trademarks of Blue Scope Steel Ltd. Rapid Plastics colours represented match COLOR-BOND® steel colours.
poly water tanks are designed and manufactured under strict control to ensure they are suitable for drinking quality and fully UV stabilised in all colours to survive our harsh climate.
Our tanks are manufactured using the best linear low density food grade polyethylene and in guidance with the following standards:
• AS/NZS 4766(INT) Polyethylene storage tanks for water and chemicals
• AS/NZS 4020:2002 Aust. Std. for drinking water
• AS 2070 Part 1 & Part 8 Aust. Std. for food contact
Corrugated for strength traditional corrugated wall profile cannot be substituted for strength and appearance. This style has been in use and PROVEN for over 100 years and is recognised to be the strongest and best DESIGN. It is a well known fact that as soon as an object receives some ribbing the rigidity increases enormously.
Self Supporting Roof Design new roof profile has been designed and tested and has proven to be the strongest and most durable. No internal support is needed in any size tank.
12 STANDARD TANK COLOURS
• Solid brass threaded outlet fitting
• Ball valve
• All tanks are rotationally moulded and tested to ensure walls are thickest at the base where water pressure is greatest
• All tanks are rotationally moulded and tested to ensure walls are thickest at the base where water pressure is greatest
• An important feature of Rapid Plastics tanks is ONE PIECE CONSTRUCTION roof and walls are moulded as one with no joins seams or parts lines down the walls. At no stage is the roof cut off and screwed back on
• Twistlock manhole cover
• 90mm overflow • 90mm overflow
• Ball valve• Moulding lifting lugs
7I ndus t r i a l P r oduc t Ca t a l ogue
M I N I N G A N D I N D U S T R I A L
S T A T E W I D E D E L I V E R Y
WE DO NOT REMOVE TOP OF TANKS FOR TRANSPORT
ZONE 1
ZONE 2
DELIVERIES AND INSTALLATION
DELIVERY REQUIREMENTSPlease be aware that our truck and trailer combinations require clearance of 20 metres long, 3.5 metres wide and 5 metres high. Clear access on roads, lane ways, through gateways, crossings and trees are essential to ensure safe delivery of your tank / products without damage.
If a driver cannot reach the location the tank/s will be left at the closest practical position. Large tanks can be delivered direct to property where there is a properly made road and large turning area available. It is the owners responsibility to provide clear access to site.
Placement of tanks above 9,500ltr on pad needs customer assistance, eg. three persons (not including driver) required to place 22,500 and 32,000ltr tanks. It is the customers responsibility to ensure there is adequate assistance available.
FREIGHT
Zone 1: Freight is free to property (access permitting) for tanks above 9,500ltr, alternatively freight is free to your nearest distributor. *Conditions apply.
Zone 2: Apply for competitive quotation.
INSTALLATIONEntry to tank not required when installing. Never enter a tank alone, always have an attendant standing by.
Restricted Space - only enter after carrying out a risk assessment.
A firm solid base, either 75-100mm (3-4”) of sand or a concrete slab must be provided to support the tank fully. Sand base should extend out at least 300mm (12”) past side walls of tank with a timber or similar edging to prevent erosion. If a tank stand is being used, decking should be no more than 50mm (2”) apart. When plumbing up, a flexible hose with a length of approx. 300mm (12”) should be used from the ball valve to absorb any shocks or movements. Overflow should be piped well clear of the tank to avoid any undermining of base. If tank is placed on a stand, support pipe work off the stand, never support pipe work off the tank.
The tank site must be level and flat, the area well compacted and free from any rocks, stones and sharp objects. Ensure that the tanks site is at least 600mm (24”) larger in diameter than the tank.
Either a 75mm (3”) compacted sand base, or other consolidated fill i.e. crusher dust, may be used as a tank pad. A concrete pad is also acceptable and must be greater than the diameter of the tank.
If a compact sand base or other consolidated fill is used, a retaining wall or surround must be provided to prevent erosion. The overflow must be piped well clear of the tank to avoid
undermining of the tank base.
Ensure that a flexible hose of at least 300mm (12”) is installed after the tank valve to absorb any shocks or movement. Failure to install properly will void warranty.
®
F L A T W A L L E D P O L Y W A T E R T A N K S
POLY WATER STORAGE TANKS
UNDERGROUND WATER TANKS
CODECAPACITY DIAMETER
(mm)
WALL HEIGHT
(mm)
TOTAL HEIGHT (mm)Litres Gallons
JRR3500 3500 770 1600 1900 1950
JRR5300 5300 1170 1800 2000 2150
JRR10500 10500 2300 2495 2400 2450
JRR15000 15000 3300 2495 3000 3100
Features• One piece construction
• Sturdy, Reliable and built to last
• UV Stabilised to withstand our harsh climate
• Supplied with screw in lid, overflow, outlet and ball valve
• Self supporting lid design
• Manufactured in guidance with Australian standards
• Available all colours (see colour chart - page 6)
“UNDER SITE — OUT OF MIND”
For collecting water, storing it underground, available on demand, out of sight, simple operation.
Features• Fully tested one piece tough poly tank
• Sealed lid reduces the possibility of anyone falling into tank
10 Rainwater TanksUnderground Rainwater Tanks“Under Site — Out of Mind”
APPROVED AND TESTED- Fully tested design to withstand ground and water pressure at depth- Complies and exceeds Aust. Std. 1546.1 for septic tanks- Designed to Aust. Std. 4766(int.) for water storage tanks- Engineered by geotechnical experts including fi nite element analysis (FEA)- Withstands top load of 5KN and a buckling load factor greater than 1.4- Anti-fl otation design and engineering specifi cations completed to AS1170
Features:- Fully tested one piece tough poly tank- Sealed locking lid with tamper proof screws - reduces the possibility of anyone falling into tank- Two fi lter options available for cleaning your water thereby reducing the need to open tank for
general maintenance- 85 lpm Stainless Steel Submersible Pump with Automatic mains water Change Over Device
(optional)
URT2250 (Bell Tank TM)
URT5000 (Sub Tank TM)
Sub TankTM - 5000 Ltr Underground Rainwater Tank ECIRP NOITPIRCSED EDOC (inc. GST)
URT5000B Bare Tank only including lid $2960.00
URT5000SI/PC Tank with Polymaster fi lter & pump controller $4880.00
URT5000VF/PC Tank with Vortex fi lter & pump controller $5290.00
URRM Riser mould for Sub tanks $127.60
Bell TankTM - 2250 Ltr Underground Rainwater Tank ECIRP NOITPIRCSED EDOC (inc. GST)
URT2250B Bare Tank only including lid $1790.00
URT2250SI/PC Tank with Polymaster fi lter & pump controller $3690.00
URT2250VF/PC Tank with Vortex fi lter & pump controller $4150.00
URRM Riser mould for Bell tanks $127.60
- Easily fi tted to tank- Sump for sediment
retention- Strainer easily taken
out for cleaning- Economical
- Completely self cleaning
- Very low maintenance- Superior design- Deeper installation
needed- Fully tested and
proven over many years.
- Installed away from tank
URSIP400 Standard Filter
URVF01 Vortex Self Cleaning Filter
OPTION 2
OPTION 1
Filter Options
A very neat package for collecting roof rainwater, fi ltering it and storing it underground, available on demand with no noise, out of sight, simple operation. Also available is a watermark approved changeover device upon request.
New Innovative Design
Dimensions (mm)3470L x 1600W x 1770H
Dimensions (mm)1870L x 1600W x 1770H
Filter
2006 Polymaster Catalogue.indd 10 14/12/2005 12:22:41 PM
FLATWALLED POLY WATER TANKS
JRR3500 JRR5300 JRR10500 JRR15000
ABOVE TANK DESIGNS ARE ALL AVAILABLE IN THE CHEMICAL TANK RANGE (SEE PAGES 10-11)
9I ndus t r i a l P r oduc t Ca t a l ogue
A V A I L A B L E I N A L A R G E R A N G E O F S I Z E S
TANK STANDS
M I N I N G A N D I N D U S T R I A L
These tank stands are engineered to carry the imposed loads of the size tank specified, in most areas of Western Australia.
Their suitability should be confirmed in cyclonic or earthquake zones before ordering.
Tank stands in larger sizes, to suit larger tanks, or for substances other than water available.
• Available in wide range of sizes
• All galvanized material used in manufacturing
• Safety ladders and railwoprk available on request
• Large load rating (Cyclone etc)
URT7000
URT4000
URT3500
CODE DESCRIPTION LENGTH (mm) WIDTH (mm) HEIGHT (mm)
URT3500 3500 Litre Underground Tank Including Lid 2300 1700 1800
URT4000 4000 Litre Underground Tank Including Lid 2800 1800 2200
URT7000 7000 Litre Underground Tank Including Lid 4000 1800 2200
UNDERGROUND WATER TANKS
®
PROCESS TANKS
Multi-Tech® heavy duty
purpose “IT Tank Range”
are specifically manufactured
heavier for any industrial
situation.
• High Density Polyethylene (HDPE) fittings for all applications including inlets, outlets, anti-vortex and overflow fittings
• Electrofusion welded fittings to suit pipework of all sizes
• Content level gauge to enable safer, easier tank level sightings.
• Safety ladders and railwork built to enable easier, quicker and safer access to tank hatch.
• Available in chemical related colours for easy identification.
• Any ball/gate valves, float valves, fittings and pipework to suit your requirements
• Available as insulated units for increased liquid content temperature efficiency and stability.
Typical Applications:• Mining Industry • Waste Water Treatment• Fire System Back Up Storage • Storing Liquid Fertiliser• Chemical Manufacturing/ • Concrete batching plants
Processing
11I ndus t r i a l P r oduc t Ca t a l ogue
M I N I N G A N D I N D U S T R I A L
PROCESS TANKS
CODECAPACITY
(litres) (gallons)
DIAMETER
(mm)
WALLHEIGHT
(mm)
TOTALHEIGHT
(mm)
IT55 250 55 600 1000 1100
IT220 1000 220 1000 1300 1500
IT500 2500 550 1400 1750 2000
IT750 3500 750 1600 1800 2100
IT750F 3500 750 1600 1900 1950
IT1000 4500 1000 1850 1800 2100
IT1000S 4500 1000 2400 1050 1400
IT1170 1170 5300 1800 2000 2150
IT2000 9000 2000 2400 2050 2400
IT2000S 9000 2000 2950 1400 1800
IT2100 9500 2100 2600 1800 2150
IT2300 10500 2300 2495 2400 2450
IT3000 13500 3000 2950 1900 2300
IT3300 15000 3300 2495 3000 3100
IT5000 22500 5000 3550 2350 2950
IT7000 32000 7000 3950 2600 3100
CUSTOM INDUSTRIAL TANKS
Detailed drawings are required as to fitting location, type and sizes on all chemical tanks (Multi-Tech® can supply tank drawings for customer to complete fitting details).
Available to suit a diverse range of applications
COURTESY OF MAKWATERCOURTESY OF MAKWATER
®
FREE STANDING CARTAGE TANKS
Sight tube for easy viewing of content volume
Cutaway Showing Baffle
Vented Lid and
Basket Filter
Moulded Lifting Lugs
Poly Fittings For Easy Connection
UNIQUE ONE PIECE MOULDED UNIT
Mounting Points
Moulded Into Tank
Features• Easy to read calibrations • Strength through ingenuity of design• Durable, impact resistant, UV stabilised polyethylene for long life• Sight tube for easy viewing of content volume (3000 litres and larger)• One outlet supplied with tank, quantity and sizes optional• Spill containment lip surrounds lid on tanks larger than 200 litres• Large range of sizes to satisfy every requirement• Integral foam filled baffle to reduce surge and increase stability*• Optional mounting pins available (refer below)• Optional Ball Baffle System® available (refer page 14)• Most models also available in sump draining design
CODE DESCRIPTION
STA-20-1 Set of 4 mounting pins to suit ST200FS
STA-20-2 Set of 4 mounting pins to suit 400, 600, 800 & 1000ltr tanks
STA-25 Set of 4 mounting pins to suit 1500, 2000, 3000 & 5000ltr tanks
STA-38 Set of 4 mounting pins to suit 7000ltr tanks
STA-47 Set of 4 mounting pins to suit 10,000, 13,000 & 15,000ltr tanks
Optional Mounting Pins
Outside view of Pin Mount
Cutaway of Pin Mount
Optional Mounting Pins
MOUNTING PINS
FREE STANDING CARTAGE TANKS
CODECAPACITY
(Litres)LID SIZE (mm) LENGTH (mm) WIDTH (mm) HEIGHT (mm)
ST200FS 200 255 1000 600 600
ST400FS 400 355 1250 900 650
ST600FS 600 355 1300 950 750
ST800FS 800 355 1400 1100 800
ST1000FS 1000 355 1400 1200 1000
ST1500FS 1500 355 1750 1250 1000
ST2000FS 2000 455 2000 1350 1100
ST3000FS 3000 455 2300 1500 1200
ST5000FS 5000 455 2700 1650 1700
ST7000FS 7000 455 3300 1850 1550
ST10000FS 10,000 455 3500 2100 1800
ST13000FS 13,000 455 4000 2350 1990
ST15000FS 15,000 455 4000 2350 2220
NONBAFFLED
NONBAFFLED
*Except ST3000, ST5000, ST13000 & ST15000 models
13I ndus t r i a l P r oduc t Ca t a l ogue
M I N I N G A N D I N D U S T R I A L
FREE STANDING CARTAGE TANKS
ST200FSST600FS ST400FS
ST13000FSST15000FS
ST7000FS
ST1500FS
ST3000FS ST2000FS
ST13000FST15000F
ST7000FS
ST1500FS
ST3000FT3000FS SST2000FT2000FSST5000FS
CODE DESCRIPTION
STA-250 255mm basket filter
STA-255 255mm lid, rim and seal
STA-350 355mm basket filter
STA-355 355mm lid, rim and seal
STA-450 455mm basket filter
STA-455 455mm lid, rim and seal
SPRAY TANK LIDS AND BASKET FILTERS
355mm STA-355
455mm STA-455
255mm STA-255
ST1000FS ST800FS
ST10000FS
®
BALL BAFFLE SYSTEM®
Steel Tankers need Ball Baffles® too!
CODE DESCRIPTION DIAMETER (mm)
SBB195 Small Ball Baffle 195
SBB355 Large Ball Baffle 355
BAFFLE BALLS
Reduce fluid movement for improved load stability.Save money by reducing mechanical wear and tear.
Tested and approved in Australia by Loadsafe Australia. Complies with load restraint guide performance standards
FEATURES
• Reduces fluid movement for improved load stability during transit
• Suitable for use with all tanks - steel, poly, fibreglass, etc.
• Food grade quality material - suitable for potable water
• Can be used with water, diesel and other liquids
• No rust, lightweight & durable
• Low liquid displacement
• Simple to install - Minimum lid opening 355mm diameter
• Recommended use quantity: - 355mm is 1 ball baffle per 40 litres of tank capacity - 195mm is 1 ball baffle per 7 litres of tank capacity
• Ball Baffles are supplied in two halves and require clipping together and inserting through the lid into tank.
• Improves tanker stability in rough terrain
• STABILITY - Don’t try this without Ball Baffles!
• BRAKING - Independent testing shows 46% improvement in braking
Slalom testing shows remarkable increase in vehicle stability with 2/3 full water tank fitted with Ball Baffle System®
SBB355SBB195
15I ndus t r i a l P r oduc t Ca t a l ogue
M I N I N G A N D I N D U S T R I A L
LIQUID CARTAGE SKIDMOUNT UNITS
• Robust galvanized skidmount frame• Forklift access for manoeuvrability• Sturdy lash down points on frame for
secure transport• High grade powdercoat finish on all
safety rail work• 3600 swivelling hose reel with lock
(to prevent accidental unwinding) for washdown applications etc.
• Unique stow-away, ground access ladder for hose reel/pump operation
• Lid access ladder and hand rails for safe filling operation
• 1½" pressure firefighter pump for hose reel supply
• 3" transfer pump with camlock fittings for easy use
• Both pump units can be used for filling, transfer etc. simultaneously
Options:• Tank and pumps suitable for
liquid chemicals• Both ladder models available
on either side of unit• Ground access ladder
available at front of unit• Pump sizes and setup
(transfer and/or pressure)• 25mm hose reel• Spreader spray bars
for water binding, dust suppression etc.
• Vinyl weather cover for pump units
• Ball Baffle System® (see page 14)
Self-contained liquid cartage units (MT-ST7000SKP & MT-ST10000SKP) set up with following features:
Slide Out Ground Access Ladder
LIQUID CARTAGE SKIDMOUNT UNITS
CODE DESCRIPTION DIMENSION (mm)L x W x H
MT-ST7000SK 7000Ltr Bare Tank and Skid Unit 4300 x 1920 x 1850
MT-ST10,000SK 10,000Ltr Bare Tank and Skid Unit 4500 x 2220 x 2100
MT-ST7000SKP 7000 Skidmount Liquid Cartage Unit complete 4300 x 1920 x 2300
MT-ST10,000SKP 10,000 Skidmount Liquid Cartage Unit complete 4500 x 2220 x 2550
Options:
MT-ST10,000SKP
Built to Last
5000ltr Skidmount Unit with water cannon setup
®
FIREFIGHTER UNITS
FIREFIGHTER UNITS
CODE DESCRIPTION DIMENSION (mm)L x W x H
FF200C 200Ltr Skid Mounted Firefighter 1500 x 600 x 650
FF400C 400Ltr Skid Mounted Firefighter 1750 x 1250 x 700
FF600C 600Ltr Skid Mounted Firefighter 1800 x 1300 x 800
FF800C 800Ltr Skid Mounted Firefighter 1950 x 1400 x 850
FF1000C 1000Ltr Skid Mounted Firefighter 2050 x 1400 x 1050
FF1500C 1500Ltr Skid Mounted Firefighter 2600 x 1250 x 1050
FF2000C 2000Ltr Skid Mounted Firefighter 2850 x 1350 x 1150
FFCH600 600Ltr Compact Firefighter 1600 x 1100 x 1000
FFCH1000 1000Ltr Compact Firefighter 1700 x 1250 x 1100
FF206 Upgrade Unit to twin impeller pump n/a
FFRC25 Upgrade to 25mm hosereel @ 30m n/a
FRC 20 19mm Poly Hose Reel @ 36m 600 x 560 x 500
FRC 25 25mm Poly Hose Reel @ 30m 600 x 560 x 500
PPK20 Skid Mounted Portable Pump Unit (with 19mm hose reel) 1600 x 600 x 650
PPK25 Skid Mounted Portable Pump Unit (with 25mm hose reel) 1600 x 600 x 650
PPK25
FRC 20
“FIRECHIEF Units Are Great Space Savers!”“FIRECHIEF Units Are Great Space Savers!”FF400C
Featuring:• Durable UV Stabilised Polyethylene Tank• Strong Hot Dip Galvanised Steel Frame with easy
lifting & tie down points - always ready for action• 19mm Poly Hose Reel - Complete With Firefighting
Adjustable Nozzle and Hose Reel Lock (to prevent accidental unwinding)
• 40mm Camlock Quick Connection Fittings• Suction hose with non return foot valve• Reliable 5.5hp Honda Engine Power 1½" Firefighter
Pump (Other Models Available)
Options:• 25mm hose reel • Diesel powered pump• High Pressure Twin Impeller Pump• Quality Vinyl Pump/Hose Reel Cover• Ball Baffle System® (see page 14)
FFCH600 FIRECHIEF
Very Popular
Portable Pump Unit suitable for:• Water Transfer • Fire Fighting• Washdown Applications
17I ndus t r i a l P r oduc t Ca t a l ogue
M I N I N G A N D I N D U S T R I A L
FIREFIGHTER TRAILERS
MT-FF1000T (Model pictured with optional extras)
MT-FF1000T (REAR VIEW)
FIREFIGHTER TRAILERS
CODE DESCRIPTION
MT-FF600T 600L Industrial single Axle Firefighter Trailer Unit
MT-FF800T 800L Industrial single Axle Firefighter Trailer Unit
MT-FF1000T 1000L Industrial Single Axle Firefighter Trailer Unit
MT-FF1000TT 1000L Industrial Tandem Axle Firefighter Trailer Unit
MT-FF1500TT 1500L Industrial Tandem Axle Firefighter Trailer Unit
MT-FF2000TT 2000L Industrial Tandem Axle Firefighter Trailer Unit
FF206 Upgrade Unit to twin impeller pump
FFRC25 Upgrade to 25mm hosereel @ 30m
Features:
• Designed and manufactured for easy operation• Durable UV stabilised polyethylene baffled tank• Galvanized chassis frame • Mudguards• Mudflaps• Heavy duty pivot jockey wheel• ADR (Australian Design Rules) compliant
Brake Systems• Landcruiser stud pattern rims• Reliable 5.5HP Honda engine coupled to 1½”
firefighter pump (different models available)• 40mm camlock quick connection fittings• 19mm poly hose reel - complete with hose reel
lock (to prevent accidental unwinding) • Suction hose with non return foot valve
Optional extras available:
• High quality powdercoat finish on mudguards• Indicator lamp kit • License inspection compliance plate • High pressure twin impeller pump• 25mm fire hose reel • Diesel powered pump• Tool/storage box • Twin Hose Reels• Vinyl Pump Hose Reel Weather Cover• Spare Tyre Carrier• Fire extinguisher• Ball Baffle System® (see page 14)
MT-FF1500TT (Model pictured with optional extras)
MT-FF800T (model pictured with optional extras)MT-FF800T
®
DIESEL TRAILED TRANSPORT EQUIPMENT
“Built tough to take it rough!”
A must for any of the following industries:mining - agricultural - earthmoving - military - plant hire - councils - forestry
DIESEL TRAILED TRANSPORT EQUIPMENT
CODE CAPACITY (Litres) DESCRIPTION
MT-DT600T 600 600Ltr Industrial Single Axle Diesel Trailer Unit
MT-DT800T 800 800Ltr Industrial Single Axle Diesel Trailer Unit
MT-DT1000T 1000 1000Ltr Industrial Single Axle Diesel Trailer Unit
MT-DT1000TT 1000 1000Ltr Industrial Tandem Axle Diesel Trailer Unit
MT-DT1500TT 1500 1500Ltr Industrial Tandem Axle Diesel Trailer Unit
MT-DT2000TT 2000 2000Ltr Industrial Tandem Axle Diesel Trailer Unit
MT-DT1500TT - 1500LTR BUNDED TANDEM AXLE TRAILER (Pictured with optional extras)
Features:• Purpose built for easy operation and smooth towing • Landcruiser stud pattern hubs with spring suspension • Durable tank manufactured with a specialised grade
polyethylene formulated for use in diesel tanks• Galvanized chassis frame • Custom mudflaps• Heavy duty pivot jockey wheel• UV stabilised for long life• ADR (Australian Design Rules) compliant
Brake Systems
Optional extras available:• Fully Bunded Chassis• High quality powdercoat finish
on mudguards• Indicator lamp kit• License inspection compliance plate• Tool/storage box• Delivery hose reel• Diesel transfer pump kits
(refer page 18)• Spare Tyre Carrier • Fire extinguisher• Ball Baffle System® (see page 14)
Mine Spec Available
19I ndus t r i a l P r oduc t Ca t a l ogue
M I N I N G A N D I N D U S T R I A L
DIESEL TRANSPORT EQUIPMENT
Full range of Diesel Cartage Tanks (200-10,000ltrs)
DIESEL TRANSPORT TANKS
CODECAPACITY
(Litres)MOUNTING LENGTH (mm) WIDTH (mm) HEIGHT (mm)
DT200 200 STEEL SKID 1000 600 750
DT400 400 STEEL SKID 1250 900 800
DT600 600 STEEL SKID 1300 950 900
DT800 800 STEEL SKID 1400 1100 950
DT1000 1000 STEEL SKID 1400 1200 1050
DT1500 1500 STEEL SKID 1750 1250 1150
DT2000 2000 STEEL SKID 2000 1350 1250
DIESEL TRANSPORT TANKS - CONTRACTOR SERIES
CODECAPACITY
(Litres)LENGTH (mm) WIDTH (mm) HEIGHT (mm)
DT200C 200 1000 600 600
DT400C 400 1250 900 650
DT600C 600 1300 950 750
DT800C 800 1400 1100 800
DT1000C 1000 1400 1200 1000
DT1500C 1500 1750 1250 1000
DT2000C 2000 2000 1350 1100
DT3000C 3000 2300 1500 1200
DT5000C 5000 2700 1650 1700
DT7000C 7000 3300 1850 1550
DT10000C 10,000 3500 2100 1800
DT600C
DT400
Our range of “Contractor Series” diesel tanks offer you a more economical way of transporting large volumes of diesel and without the need for a steel skid to mount your tank as it has a free standing base.
Features:
• Baffled for vastly improved vehicle stability• Flat based to allow transport flexibility• Special grade polyethylene for diesel - coloured to denote “Diesel Only”• UV stabilised for long outdoor life• Mounting Pins Available• Ball Baffle System® (see page 14)
Features:
• Convenient range of sizes to satisfy most requirements
• Strong, durable yet lightweight tanks with robust galvanized steel skid frame to withstand most demanding conditions of use
• Integral draining sump with 3/4” drain plug to allow complete evacuation of contents
• 2” filler hole with cap, 2” drum pump access fitting and splash resistant vent
• Calibrated for easy checking of content volume with optional sight tube available
• Ball Baffle System® (see page 14)
®
DIESEL TRANSPORT EQUIPMENT
DMP200 DMP400 DMP450
DMP600 DMP800 DMP1000
SELF CONTAINED DIESEL UNITS
Multi-Tech® self contained diesel units have all fittings and pump safely under cover
Ball Baffles® included with 800 & 1000ltr models
Features:
• Models to fit all ute trays
• Pump cover to protect pump and fittings from weather and damage
• Transfer pump includes 40LPM pump, vented filler cap, 4m fuel hose, electrical leads and clamps plus trigger nozzle
• Lightweight and compact units - saves tray space and allows easy on/off loading
• Automatic trigger nozzle as standard
SELF-CONTAINED DIESEL UNITS
CODECAPACITY
(Litres)DESCRIPTION LENGTH (mm) WIDTH (mm) HEIGHT (mm)
DMP200 200 200LTR Diesel Tank with 12V Pump 1020 620 620
DMP400 400 400LTR Diesel Tank with 12V Pump 1650 620 620
DMP450 450 450LTR Diesel Tank with 12V Pump 1700 880 620
DMP600 600 600LTR Diesel Tank with 12V Pump 1700 880 740
DMP900 800 800LTR Diesel Tank with 12V Pump (Including Baffle Balls) 1700 1000 860
DMP1000 1000 1000LTR Diesel Tank with 12V Pump (Including Baffle Balls) 1700 1000 1025
For use with diesel only. Tank must be secured to vehicle and safe working practice observed. Some fuel distributors have specific filling requirements - check with your supplier before ordering. Multi-Tech® is not liable for any damage or loss through improper use of this equipment.
DMP600DMP600DMP600 DMP1000DMP1000
21I ndus t r i a l P r oduc t Ca t a l ogue
M I N I N G A N D I N D U S T R I A L
ADBLUE® TRANSPORT EQUIPMENT
SELF CONTAINED ADBLUE® UNITS
Features:• Fully enclosed lockable pump compartment
for security and protection
• AdBlue® compatible pump and nozzle for easy dispensing
• 4 metres of 19mm flexible delivery hose
• Secure lockable lid provision
• 4 metres of electrical cable with battery clips
• Tank manufactured from AdBlue® compatible polyethylene
• 40mm sealed filling port
• 25mm breather vent located behind lid
SELF-CONTAINED ADBLUE® UNITS
CODECAPACITY
(Litres)DESCRIPTION LENGTH (mm) WIDTH (mm) HEIGHT (mm)
ADP200 200 200LTR AdBlue Tank with 12V Pump 1020 620 620
ADP400 400 400LTR AdBlue Tank with 12V Pump 1650 620 620
ADP450 450 450LTR AdBlue Tank with 12V Pump 1700 880 620
ADP600 600 600LTR AdBlue Tank with 12V Pump 1700 880 740
ADP800 800 800LTR AdBlue Tank with 12V Pump (Including Baffle Balls) 1700 1000 860
ADP1000 1000 1000LTR AdBlue Tank with 12V Pump (Including Baffle Balls) 1700 1000 1025
Ball Baffles® included with 800 & 1000ltr models
Available in 200, 400, 800 & 1000ltr capacities
®
DIESEL TRANSFER EQUIPMENT
DIESEL PUMP KITS
Diesel Pump Kits for refuelling operations from drums, tanks or mobile refuelling carts.Robust proven pump kits for diesel refuelling operations. Designed to give effortlessrefuelling for agriculture, transport, earthmoving, mining, logging and marine industries.
MT-12MFeatures:• Manual Nozzle• Cast iron construction pump• Solid rotary drum connector• 4 metre rubber fuel hose• 4 metre cable and clamps• Fuse and holder• 38 L/min open flow
MT-12AFeatures:• Automatic Shutoff Nozzle with swivel• Cast iron construction pump• Solid rotary drum connector• 4 metre rubber fuel hose • 4 metre cable and clamps • Fuse and holder • Lockable Nozzle Holster • 38 L/min open flow
CODE DESCRIPTION
MT-12M 12 volt Pump Kit - Manual Nozzle - 38LPM
MT-12A 12 volt Pump Kit - Auto Shut-off Nozzle - 38LPM
DIESEL PUMP KITS
CODE DESCRIPTION
MT-12AHF 12 volt Hi-Flow Pump Kit with Auto Shut-off Nozzle - 85LPM
MT-12/24A 12/24 volt Pump Kit with Auto Shut-off Nozz;e - 35/72LPM
MT-12A40K 12 volt Pump Kit with Auto Shut-off Nozzle - 40LPM
MT-12A60K 12 volt Pump Kit with Auto Shut-off Nozzle - 60LPM
MT-240A60K 240 volt Pump Kit with Auto Shut-off Nozzle - 60LPM
MT-12A40KFeatures:• 40L/min open flow• 4 metres of 20mm anti-static delivery hose with anti-kink spring + auto shut-off nozzle• 4 metres of power cable• 2 metres of 20mm suction hose• On/off switch on pump
MT-12A60KFeatures:• 60L/min open flow• 4 metres of 25mm anti-static delivery hose with anti-kink spring + auto shut-off nozzle• 4 metres of power cable• 2 metres of 25mm suction hose• Easy clean suction strainer
MT-240A60KFeatures:• 60L/min open flow - 240 volt• 4 metres of 25mm anti-static delivery hose with anti-kink spring + auto shut-off nozzle• 4 metres of power cable• 2 metres of 25mm suction hose• Easy clean suction strainer
MT-12AHFFeatures:• 85 L/min open flow• 12 volt DC/35 amp pump• 4 metre battery cable with alligator clips• Easy to use volumetric self priming• 1” BSP female ports• 4 metres of 25mm diesel delivery hose• Auto Shutoff Nozzle with swivel
MT12/24AFeatures:• Dual voltage 12/24-volt DC 150/240 watt 16/25 amp pump, 12V - 35L/min 24V - 75L/min• 4 metre battery cable with
alligator clips• Easy to use volumetric
self priming• Auto Shutoff Nozzle with swivel
• 85 L/min open flow• 85 L/min open flow
23I ndus t r i a l P r oduc t Ca t a l ogue
M I N I N G A N D I N D U S T R I A L
FLOW METERS
DIESEL HOSE REELS
AUTO SHUT-OFF NOZZLES
MT-FM4 MT-FMDFeatures:• 1” BSP port 4 digit flow meter with flow range from 20 - 120 LPM.• 4 digit resettable totaliser. 8 digit non resettable cumulative total.• For use with diesel fuel in pump or gravity applications.
Features:• 1” BSP electronic inline turbine meter with compact display ideal for fitting at fuel nozzles.• Flow range 10-120 LPM maximum, Working Pressure 300 PSI. Accuracy ± 1%.
MT-FM4MT-FM4
CODE DESCRIPTION
MT-FM4 1” BSP port 4 digit flow meter
MT-FMD 1” BSP electronic inline digital flow meter
MT-DHA20MT-DHM25 MT-DHA25Features:• 13m of 20mm diesel hose• 3/4” BSP fittings• Spring loaded retractable reel• Heavy duty steel construction• Hose feed guide with stopper
Features:• Hand rewind hose reel• Entry level model for contractors• Capacity 10m x 25mm hose, • Powdercoated steel construction
Features:• Hose reel with 15m x 25mm hose. 1” BSP inlet/ outlet. Air/Water/Diesel.• 300 PSI Working Pressure.
MT-DHM25Features:
CODE DESCRIPTION
MT-DHM25 25mm Manual Rewind Diesel Hosereel
MT-DHA20 20mm Auto Rewind Diesel Hosereel
MT-DHA25 25mm Auto Rewind Diesel Hosereel
CODE DESCRIPTION
MT-ASN19 3/4” Auto Shut-off Nozzle
MT-ASN25 1” Auto Shut-off Nozzle
MT-ASN19
MT-ASN25
®
WATER PUMPS
CODE DESCRIPTIONDIMENSIONS (MM)
Diameter Height
MT1500 1500Ltr Mud Tub 2000 650
MT2000 2000Ltr Mud Tub 2300 650
MT3000 3000Ltr Mud Tub 2300 850
High Volume Transfer Pumps...
Firefighter Pump
Packaged Diesel Pump Set
CONVEYOR WEATHER HOOD SYSTEMS
CODE DESCRIPTIONDIMENSIONS (MM)
Diameter Height
MT1500 1500Ltr Mud Tub 20002000 650MT1500 1500Ltr Mud Tub 20002000 650
Features:
• Durable and resilient to withstand harsh elements
• Eliminates material contamination problems
• Reduces dust, spillage and sliding issues due to wind and rain
• Individual units allow separate access for maintenance, inspection etc
• Flexible designs and fastening systems
MUD TUBSFeatures:• Tough polyethylene construction• Various capacities available• Light enough to man handle
Durable, lightweight poly tubs ideal for drilling and mining situations where on site mud water storage is required whilst still being able to transport easily.
• Pressure Systems
• High Volume Transfer Pumps
• Applications: irrigation, water transfer, firefighting, washdown, water treatment, dewatering• High Volume packaged pump sets• Engine Driven self-priming pumps
TRANSFER AND PRESSURE
25I ndus t r i a l P r oduc t Ca t a l ogue
M I N I N G A N D I N D U S T R I A L
PIPE FLOATS
Our range of resilient lightweight pipeline floats are ideal for various applications such as mining, dredging, and marine environments.
Features:• Easy to install• Durable and longlasting• Chemical resistant and UV stabilised• Tough rotationally moulded
polyethylene• Wide Range of sizes
CODE DESCRIPTIONDIMENSIONS
OD ID LENGTH
MTF75 75MM PIPE FLOAT 300 75 600
MTF125 125MM PIPE FLOAT 300 125 600
MTF160 160MM PIPE FLOAT 460 160 900
MTF200 200MM PIPE FLOAT 460 200 900
MTF250 250MM PIPE FLOAT 670 250 1000
MTF315 315MM PIPE FLOAT 670 315 1000
MTF355 355MM PIPE FLOAT 800 350 1000
MTF450 450MM PIPE FLOAT 1300 480 1050
Recess ribs foradded strength
Chamferedopenings forflexibility
Galvanised fastenersfor long life
HDPEpolyethylenepipeline*
* HDPE pipe sold seperately
Durable UVstabilisedpolyshell
PIPE FLOATS
®
SEPTIC TANKS
Features:
• Lightweight, easy to tranport and install• Manufactured from UV stabilised durable polyethylene• Anti floatation ring and ribbing incorporated into design• Supplied as complete kit including lid, inlet & outlet ‘T’ pieces• Optional baffle (available for SEP-2500 only)• Leach Drain systems also available (see page 27)
Easy & simple installationEasy & simple installation
CODE CAPACITY DIMENSIONS WEIGHT
SEP-1500 1200LTR 1400D x 1900H 85kg
SEP-2500 2200LTR 1700D x 1850H 125kg
SEP-BAF - - 10kg
SEP-1500
SEP-2500
SEP-2500 (cutaway showing optional baffle)
SEPTIC TANKS
27I ndus t r i a l P r oduc t Ca t a l ogue
M I N I N G A N D I N D U S T R I A L
LEACH DRAIN SYSTEMS
SEPTI-TECH leach drain systems are design to integrate efficiently with the 1200 & 2200ltr septic tank units (page 26) although can be utilised in any waste water situation requirement that requires a leaching system.
Manufactured from strong light weight polypropylene they are an easy to install cost effective solution for effluent waste issues. They are flat packed for easy and efficient logistics.
The systems are very flexible with a range of configurations for every individual requirement and designed to meet strict industry regulations and standards.
Infiltration
Retention
Storage
Quick & Easy to install!
Range of sizes for all applications
Features:
• 100% recycled• Light weight• Modular• 95% void area• Strong• Service temperature,
-20oC – 120oC• Polypropylene• Flat pack form• Made in
Western Australia
Benefits:
• Environmentally friendly
• Simple to install• Trafficable• Cost effective• Chemically inert• Not affected by
mould or algae• UV stabilised• Water saving• 100% recyclable
®
ABLUTION BUILDING WASTE TANK SYSTEM
OVERVIEWSEPTIC-TECH Ablution Building Waste Tanks are designed to sit underneath portable ablution buildings so there is no need for a sewer connection therefore making it easy and hygienic for waste collection and disposal.
The heavy duty galvanised frame structure the waste tank sits in is strong and long lasting with lifting points for placing in position for the building to be secured to the top.
SEPTIC-TECH Waste tanks are available in six different capacity sizes of 1500ltr, 2000ltr, 3000ltr, 4000ltr, 4500ltr and 6000ltr.
Features:• Heavy Duty Steel Frame• Engineer Certified• Certified to withstand 7000kg• 6 sizes to suit any application
• Durable Polyethylene tanks – Will not Rust• Certified lifting tabs• Steel tow hooks on all sizes• Tank pump out port available
1500LTR WASTE TANK MODULEAPPROX. WEIGHT: 250kg
DIMENSIONS: 2000L X 2400W X 470H (MM)
CARRYING CAPACITY: 4000kg
2000LTR WASTE TANK MODULEAPPROX. WEIGHT: 260kg
DIMENSIONS: 2000L X 2400W X 575H (MM)
CARRYING CAPACITY: 4000kg
3000LTR WASTE TANK MODULEAPPROX. WEIGHT: 510kg
DIMENSIONS: 4000L X 2400W X 470H (MM)
CARRYING CAPACITY: 5500kg
4500LTR WASTE TANK MODULEAPPROX. WEIGHT: 740kg
DIMENSIONS: 6000L X 2400W X 470H (MM)
CARRYING CAPACITY: 7000kg
4000LTR WASTE TANK MODULEAPPROX. WEIGHT: 540kg
DIMENSIONS: 4000L X 2400W X 575H (MM)
CARRYING CAPACITY: 5500kg
6000LTR WASTE TANK MODULEAPPROX. WEIGHT: 800kg
DIMENSIONS: 6000L X 2400W X 575H (MM)
CARRYING CAPACITY: 7000kg
CODE 1500LTR UNIT MODULE RANGE
ABWT1500 1500ltr Module = (1 x 1500ltr Unit)
ABWT3000 3000ltr Module = (2 x 1500ltr Unit)
ABWT4500 4500ltr Module = (3 x 1500ltr Unit)
CODE 2000LTR UNIT MODULE RANGE
ABWT2000 2000ltr Module = (1 x 2000ltr Unit)
ABWT4000 4000ltr Module = (2 x 2000ltr Unit)
ABWT6000 6000ltr Module = (3 x 2000ltr Unit)
WASTE TANK KITS
29I ndus t r i a l P r oduc t Ca t a l ogue
M I N I N G A N D I N D U S T R I A L
PORTABLE PRESSURE TANK SYSTEMS
No mains water? - No problem with Multi-Tech® portable pressure water storage systems. Portable water with poly tank, pressure pump and optional filtration systems in a packaged set ready to go!
Features:• Available in several capacities• Heavy Duty galvanised steel skid frame• Certified lifting points for crane or forklift• Optional full UV filtration for hassle free
portable water• Durable polyethylene tanks - no rust!• Removable pump cover• Commercial pressure pump plumbed to tank• Suitable for shower and washrooms, ablution
buildings, kitchens/messes, construction sites and public events
• Statewide Delivery
CODE DESCRIPTION
PPTS2500 2500ltr Tank & Skid Unit
PPTS4500 4500ltr Tank & Skid Unit
PPTS9000 9000ltr Tank & Skid Unit
PPTS-PUMP Pump only option
PPTS-FLTR Sediment filter option
PPTS-UV Pump & UV filtration option
PORTABLE PRESSURE TANK SYSTEMS
Tank Restraint Bar
Pump Cover
Certified Lifiting Lugs
Inline Filter
®
HANDLING EQUIPMENTSPECIAL FEATURES:• Special nonslip tread on
every step
• All poly manufacture no steel to rust
• Wide steps for easy stepping and balance
• Sturdy construction with splayed feet for extra stabillity
• Built in handle for ease of moving
• High density polyethylene
WARNING - Do not balance on top step.
Max load 120kg. Best for indoor use.
HANDY STEPS
CODEDIMENSIONS (mm)
L x W x H
HSP 700 x 400 x 600
UNDERTRAY WATER TANK
CODE CAPACITYDIMENSIONS (mm)
L x W x H
UTT100 100ltrs 1400 x 300 x 250
SPECIAL FEATURES:• 100 Litre capacity
• Convenient compact size
• Great for under ute trays & caravans
• Also available in diesel tank
SPECIAL FEATURES:• Rubber Feet supplied
• Stackable
• Dual Hand Grips
• 150kg U.D.L. (certified)
• Can be Secured
• Fully Recyclable
• Weighs 4.5 Kg
• Load tested 450kg
TRUCK WATER TANK
CODECAPACITY
(Litres)DIMENSIONS
L x W x H (mm)
UTT60S 60 600 x 390 x 390
SPECIAL FEATURES:• Rigid food grade
polyethylene
• 20mm tap provided at the base of tank
• Breathing bung provided at top for easy filling
• 60 litre capacity
• Mounting kit included
• Available in silver grey, white and black
CODE CAPACITYDIMENSIONS (mm)
L x W x H
SCS 150 500 x 500 x 380
SAFECRATE™ STEP STOOL
31I ndus t r i a l P r oduc t Ca t a l ogue
M I N I N G A N D I N D U S T R I A L
NOTES
®
Mining & Industrial
www.rapidplastics.com.au☎ FREECALL 1800 646 277
• IndustrIal ChemICICal al tankstankst
• Free standIng Cartage ng Cartage ttanksankstanksttankst
• Ball BaFFle systems/systems/systems/ kId mmount Cartage ount Cartage tankstankst
• FIreFIghter unIts
• dIesel and adBlue tanks
• dIesel PumP kIts, Flow metres and aCCaCCessoressorIeses
• water PumPs
• Conveyor hood systems
• PIPe Floats
• mud tuBs
• handlIng equIPment
• sePtI-teCh sePtIC tank tank t range/leaCh draIns
• aBlutIon BuIldIng waste system range
• PortaBle Pressure tank systems