Monitoring and Control system

Presented by:Mahmoud Abu ShaweeshSamer AlqrmanAhmad ALseersupervised by:Ph. Basil Hamed

Contents:1.Control system

What is the Control System ?ProcessOpen-Loop Control SystemClosed-Loop Control SystemExamples of modern control system

2. Monitoring SystemWhat is the Monitoring System ?Process Monitoring System

3. conclusion

What is the Control System ?•  it’s a device, or set of devices, that

manages, commands, directs or regulates the behaviour of other devices or systems.

1. Control system

• Industrial control system are used in industrial production for controlling equipment or machines.

Process • The device, plant, or system

under control.

Input process

Process to be controlled

• The input and output relationship represents the cause-and- effect relationship of the process

Output

Open-Loop Control System

• utilizes a controller or control actuator to obtain the desired response.

Desired output response

Actuating device process Output

Open-Loop Control system without feedback

• utilizes feedback to compare the actual output to the desired output response

Desired output

response

Comparison

controller process Outpu

t

Measurement

Closed-loop feedback control system (with feedback )

Examples of Modern Control system Desired

causeof travel

ErrorDriver

Steering mechanis

mAutomobil

e Actual output

Measurement, visual and

tactile

Automobile steering control system

The driver uses the difference between the actual and the desired direction of travel to generate a controlled adjustment of the steering wheel

Typical direction of-travel response.

2. Monitoring System What is the Monitoring System ?

• A monitoring system is a set of software components that performs measurements , stores , and interprets the monitored data.

• The system is optimized for efficient storage and prompt retrieval of monitoring metrics for visual inspection of timeseries as well as data point analysis for the purposes of alerting

Process Monitoring System

• Our process monitoring systems are using process data from the basic automation system and primary data.

• There will be no process intervention.

• The processing of information from diverse systems turns our process monitoring systems to valuable tools for the complete documentation of production, quality assurance and quality improvement.

• Process related data will be archived and provided to the user for documentation and analysis of the production process.

• The visualization of process control system informs the operator on current process situation.

• The hardware base always consists of current PC technology comprising the process control software which has been created by us.

• Via password protected user levels technological and administrative system modifications can be made and process results can be evaluated.

• It can be used for planning and optimization of the production process.

3. conclusion

Thank You for Listening Any Question ?