Molykote India Call +91-98851-49412
-
Upload
project-sales-corp -
Category
Health & Medicine
-
view
125 -
download
3
Transcript of Molykote India Call +91-98851-49412
Should you be paying 4 times more than the cost of mineral oil ? Molykote® Hydrocracked Base Oils and why it makes sense. Brief Presentation prepared by: Project Sales Corp, Visakhapatnam, India
In applications where conventional mineral oils gave a life of x, Molykote® gave 5x.
In the following page, you will see how. It does make sense to look at the total cost (labour costs, downtime costs, machine breakdown and repair costs, etc) which does not increase when shifting to pure hydrocracked base fluids from Molykote®.
Molykote® lasts 5 times as longer and more
Molykote® vs. Conventional Mineral Oils
Conventional contains 13-15,500 ppm sulphur (1% of total). This forms acid with water.
Molykote contains < 10 ppm sulphur.
Also contains 150 ppm water when new. Increases gradually. At 550-700 ppm water, bearing wear occurs. Water in bearing >100 ppm can reduce bearing life by 30-80%.
In Molykote water contents remain low over all life.
Conventional mineral oil due to water contamination have a weak lubricating film, form rust and abrasive wear, and emulsify with water for permanent damage to component.
Molykote contains over 99% saturates and does not allow for water to enter the lubricating oil molecules.
High humidity results in water contamination. This dissolved water is not visible but can do lot of insidious damage. Molykote formulated from hydrocracked base stocks with proprietary additive technology can – Outlast the service life of conventional mineral oils by 5 times
due to its resistance to emulsification, as it can defers the ageing process by not providing any site for the oxidant to bond on the lubricating molecules. This protects equipment from premature wear.
Benefits of Molykote® for Indian Conditions
Hydraulic Fluids Gear Oils Compressor Oils Vacuum Pump Oils Chain Oils
Molykote® Industrial Fluids Range
The performance of Molykote can be best judged from trials. It is suggested that areas where the conventional mineral oils have failed to give proper life or have resulted in premature wear of components, be chosen for trials of Molykote hydrocracked oils.
Where to make trials of Molykote®
Semi synthetics, blend of PAO/MO Synthetics based of PAO, PAG, Diesters, Silicones Specialty fluids including Refrigeration Compressor Oils
General Purpose Machinery Oils
Molykote® Oils –Blends Available
For a complete brochure on Molykote range, get in touch with us today at +91 891 2564393, 91 891 2590482 or mail us at [email protected]
www.molykote.com
Further Information