Alfa was born from the union of just two pieces: one is the back, which continues into the rear legs; the other is the seat that extends into the front legs. Both pieces are in “SMC” material, Polyester Resin, Fibre-glass re-inforced. Product certified UNI EN 1022/98 Stability Test, UNI EN 1728/00 Load and Resistance Test, UNI 8584/84 Resistance to Structural Fatigue.

HANNES WETTSTEIN 2001ALFA—

Best Seating 2001: Alfa

Dimensions in millimeters and inches. The right to discontinue and make changes is reserved. This information is based on the latest product information available at the time of printing.molteni.it

DATASHEET REGISTERED DESIGN

XII.2014

1—2

SPECIAL MATT COLOURSchalk white - platinum - anthracite - sand

SPECIAL GLOSSY COLOURSchalk white - silver grey

FINISHES

TECHNICAL INFORMATION

Dimensions in millimeters and inches. The right to discontinue and make changes is reserved. This information is based on the latest product information available at the time of printing.molteni.it

2—

DATASHEET

REGISTERED DESIGN

XII.2014

ALFA— HANNESWETTSTEIN2001

2

SEAT AND BACK“SMC” - Compound polyester resin reinforced with glass fibre. Available in the versions glossy and matt lacquered.

FEETNon-slip polyurethane.

SEAT

FEET

BACK

DIMENSIONS

1SA

chairW 490 D 500 H 800W 19 1/4” D 19 3/4” H 31 1/2”

460 18 1/8”