MAPS MAP Protocol Emulator - gl.com · PDF fileStatus, & Check IMEI Status ... MO SMS,...
-
Upload
truongdieu -
Category
Documents
-
view
218 -
download
1
Transcript of MAPS MAP Protocol Emulator - gl.com · PDF fileStatus, & Check IMEI Status ... MO SMS,...
Document Number: PKS132-XX694-7.2.21-01
818 West Diamond Avenue - Third Floor, Gaithersburg, MD 20878, U.S.A
(Web) http://www.gl.com/ - (V) +1-301-670-4784 (F) +1-301-670-9187 - (E-Mail) [email protected]
Simulates MAP Signaling over IP and TDM
Supporting Interfaces are C, D, E, F, Gc, Gd, Gf, and Gr
Mobile Application Part (MAP) Protocol
Simulates MSC/VLR, RNC, HLR, EIR, SMSC, SGSN and GGSN
LoCation Services (LCS) over Lg and Lh Interfaces
Bulk Call Simulation, Load/Stress Testing
Supports M3UA, M2PA, M2UA, MTP3 Transport over IP & TDM
GPRS Location Update, MT/MO SMS, Location Update, MAP Authentication, Routing Information, Remote User Status, & Check IMEI Status Procedures
Call Flow Customization with Message & Sequence Editors
Graphically Depicts Call Flows in Ladder Diagrams
Main Features • MAP protocol simulation over IP and over TDM (E1/T1).
• Emulator can be configured as MSC/VLR, RNC, HLR, EIR, SMSC, SGSN and GGSN entities to emulate C, D, E, F interfaces in the GSM network and Gc, Gd, Gf, and Gr in the UMTS network.
• User-friendly GUI for configuring the MAP signaling links over IP and TDM.
• Access to all M2PA, M2UA, MTP3, M3UA, SCCP, and MAP R4 protocol fields such as TMSI, IMSI, MCC, MNC, MSIN, CCBS and more.
• Ready scripts for GPRS Location Update, MT and MO SMS, Location Update, MAP Authentication, Routing Information, Remote User Status, & Check IMEI Status procedures
• Simulates LoCation Service (LCS) between GMLC, MSC, and HLR entities over Lg and Lh interfaces.
• Automation, Remote access, and Schedulers to run tests 24/7.
Overview
The Mobile Application Part (MAP) is an GSM protocol which provides application layer services to the various nodes in GSM and UMTS networks. MAP can be transported using 'traditional' SS7 protocols carried by Message Transfer Protocol (MTP) in TDM (T1 and E1) or by M2PA, M3UA, and M2UA User Adaption layer in IP using SIGTRAN. As illustrated in the network diagram, some of the GSM/UMTS circuit switched interfaces such as C, D, E, F, Gc, Gr, Gf, Gd use Mobile Application Part (MAP) protocol. The “radio” and “core” network partition is also shown above for GSM and UMTS networks. Common services provided by MAP are “Location Tracking”, “Roaming”, “Subscription Information”, “Short Message Service”, “LoCation Service (LCS)” and many more.
Now, MAPS™ MAP product line bearing the same acronym, is used to emulate all the GSM and UMTS MAP interfaces shown above over IP and TDM. Supports various procedures across the MAP interfaces including GPRS Location Update, MT and MO SMS, Location Update, MAP Authentication, Routing Information, Remote User Status, and Check IMEI Status.
MAPS™ MAP is enhanced to simulate LoCation Services (LCS) over Lg and Lh interfaces connecting GMLC <-> MSC and GMLC <-> HLR entities. Supported LCS procedures includes Provide Subscriber Location, Subscriber Location Report, and Routing Info for LCS respectively, as per 3GPP TS 23.271 specifications. Additional features includes error tracking, regression testing, conformance testing, load testing and call generation.
For more details refer to http://www.gl.com/map-protocol-emulation-over-ip-tdm-using-maps.html webpage.
MAPS™ MAP Protocol Emulator (Scripted Mobile Application Part Protocol Emulator over IP & TDM)
Document Number: PKS132-XX694-7.2.21-01
818 West Diamond Avenue - Third Floor, Gaithersburg, MD 20878, U.S.A
(Web) http://www.gl.com/ - (V) +1-301-670-4784 (F) +1-301-670-9187 - (E-Mail) [email protected]
Page 2
Testbed Setup Configuration
Test Bed setup is provided to establish communication between MAPS™ MAP over TDM and IP with the DUT.
MAPS™ MAP allow users to configure SCTP layer (over IP) and MTP layer (over TDM) parameters. Once the testbed setup is configured properly, MAP messages can be transmitted and received over configured layers.
The Testbed configuration includes parameter settings such as Source and Destination node configurations such as IP addresses, Port, Point Code, and Subsystem Number.
Default profile is used to configure MAPS™ MAP with HLR, MSC, SMSC, SGSN, and other supported interface end-user parameters.
Figure: Testbed Setup for MAPS™ MAP over TDM
Profile Editor - This feature allows loading profile to edit the values of the variables using GUI, replacing the original value of the variables in the message template. An XML file defines a set of multiple profiles with varying parameter values that allow users to configure call instances in call generation and to receive calls.
Figure: Profile Editor
Pre-processing Tools Script Editor - The script editor allows the user to create / edit scripts and access protocol fields as variables for the message template parameters. The script uses pre-defined message templates to perform send and receive actions.
Figure: Script Editor
Message Editor - With message editor, users can build a template for each protocol message type. The value for each field may be changed in the message template prior to testing. The protocol fields comprises of mandatory fixed parameters, mandatory variable parameters, and optional variable parameters.
Figure: Message Editor
Figure: Testbed Setup for MAPS™ MAP over IP
Document Number: PKS132-XX694-7.2.21-01
818 West Diamond Avenue - Third Floor, Gaithersburg, MD 20878, U.S.A
(Web) http://www.gl.com/ - (V) +1-301-670-4784 (F) +1-301-670-9187 - (E-Mail) [email protected]
Page 3
Call Generation and Reception In call generation, MAPS™ is configured for the out going messages, while in call receive mode, it is configured to respond to incoming messages. Tests can be configured to run once, multiple iterations and continuously. Also, allows users to create multiple entries using quick configuration feature.
The editor allows to run the added scripts sequentially (order in which the scripts are added in the window) or randomly (any script from the list of added script as per the call flow requirements). The test scripts may be started manually or they can be automatically triggered by incoming messages.
Figure: Call Generation & Event Log
Typical MAP Interface Call Procedures...
Figure: LoCation Services (Lg, Lh interface) Procedures
Figure: Retrieval Routing Information Procedure
Figure: MAP/D Location Update Procedure
Typical MAP Interface Call Procedures Shown below are some of the typical call procedures in GSM MAP over IP and TDM interfaces. Supporting procedures include GPRS Location Update, MT and MO SMS, Location Update, MAP Authentication, Routing Information, Remote User Status, & Check IMEI Status procedures. LCS procedures over Lh & Lg interfaces includes SEND-ROUTING-INFO-FOR-LCS, PROVIDE-SUBSCRIBER-LOCATION, & SUBSCRIBER-LOCATION-REPORT Service
Figure: MT and MO SMS Procedure Figure: GPRS Location Update Procedure
Document Number: PKS132-XX694-7.2.21-01
818 West Diamond Avenue - Third Floor, Gaithersburg, MD 20878, U.S.A
(Web) http://www.gl.com/ - (V) +1-301-670-4784 (F) +1-301-670-9187 - (E-Mail) [email protected]
Page 4
Supported Protocol Standards
Supported Protocols Standard / Specification Used
MAPR4 3GPP TS 29.002 V4.18.0 (2007-09)
TCAP ANSI T1.114-1996
SCCP Q.713, CCITT (ITU-T) Blue Book
MTP3 ITU-T Q.782
M2PA RFC 4165
M3UA RFC 3332
M2UA RFC 3331
SUA RFC 3868
SCTP RFC 4960
Buyer’s Guide
PKS132 - MAPS™ MAP over IP Protocol Emulation
XX694 - MAPS™ MAP Protocol Emulation
Related Software
PKS139 - MAPS™ Diameter Emulator
PKS147 - MAPS Lb Interface Emulator
PKS148 - MAPS LTE SLs Interface Emulator
PKS140 - MAPS™ LTE - S1 Interface
PKS142 - MAPS™ LTE - eGTP (S3, S4, S5, S8, S10, S11 and S16) Interfaces
PKS130 - MAPS™ SIGTRAN (SS7 over IP)
XX649 - MAPS™ SS7 Protocol Emulation
PKS164 - MAPS™ UMTS – Iu-PS Interface Emulation
PKS160 - MAPS™ UMTS – Iu-CS and Iuh Interface Emulation
Related Software...
XX648 - MAPS™ ISDN Interface Emulator
XX692 - MAPS™ GSM-A Interface Emulator
XX693 – MAPS™ GSM --Abis Interface Emulator
XX651 - MAPS™ CAS Emulator
XX652 - MAPS™ MC-MLPPP Conformance Test Suite (Test Scripts)
PKS135 - MAPS™ ISDN-SIGTRAN (ISDN over IP)
PKS120 - MAPS™ SIP
PKS121 - MAPS™ SIP Conformance Test Suite (Test Scripts)
PKS122 – MAPS™ MEGACO
PKS123 – MAPS™ MEGACO Conformance Test Suite (Test Scripts)
PKS124 - MAPS™ MGCP & Conformance Test Suite (Test Scripts)
For complete list of MAPS™ products, refer to http://www.gl.com/maps.html webpage.
Supported Protocols Standard / Specification Used
MAPR4 3GPP TS 29.002 V4.18.0
(2007-09)
TCAP ANSI T1.114-1996
SCCP Q.713, CCITT (ITU-T) Blue Book
MTP3 Q.703, ITU-T Blue Book