Manuel utilisateur telecom a50
Transcript of Manuel utilisateur telecom a50
-
7/31/2019 Manuel utilisateur telecom a50
1/16
-
7/31/2019 Manuel utilisateur telecom a50
2/16
a. 50 10. 2008 - 0ENFP2322- 3 2
Langue f ranaise
1 2 - 6 Raccordem ent s Ligne (1 ), Modem (2 DATA), Casque (6 )
3 - 5 Voyants de rcept ion d appel, pour t out appel (3), aprs appel en absence (5 )
4 Ecran incl inable. I l s claire au dcroch
7 10 Touches de correct ion (7 C) , de val idat ion (8 ) , de retour et de ver roui l lage (9 ) , de
volume et de dfi lement dans les menus (10 VOLST)
11 Touches de mm oires pour mm oires M1 M10 et M11 M20
12 Touch e de passage aux m mo ir es M11 M20
13 Accs au rpert oire alphanumrique 99 enregist rement s
14 R Flashing
15 Bis dernier num ro / Pause
16 Passage en mains libres ;ou dcroch / raccroch au casque
17 Secret pour couper le micr o
18 - 19 En posit ion murale, ergots de raccroch (18) et de mise en att ente (19)
-
7/31/2019 Manuel utilisateur telecom a50
3/16
a. 50 10. 2008 - 0ENFP2322- 3 3
Dans ce mm ent o, signif ie Dcrocher .
dsigne une manipulat ion, suivre le cas chant dans un ordre indiqu par , , ou
Les [valeurs] font rfr ence l i l l ust rat i on de la page prcdente
PRESENTATION
a.50 est compat ible avec les st andards ADEPT Telecom et peut tr e raccord sur le r seau public analogique.Pour le raccordement sur un PABX d autre m arque, vei l l ez vr if ier la compat ibi l i t avec votr e fournisseur
dquipement .
Le post e a.50 comport e une pr i se RJ11 DATA [2] dest ine r accorder un m odem en parallle sur l a l igne.
MISE EN SERVICE
Avant t oute ut i l isat ion ou programmat ion, votre poste a.50 doi t t re a l iment par t ro is p i les de t ype AA
LR6. Celles-ci sont placer dans le compart iment sit u au dos de l appareil . Il est impratif de retirer le
cordon ligne avant d insrer les piles, dans le cas dune premire installat ion ou dun changement de
piles.
Aprs avoir pl ac les piles, raccor dez le cord on ligne , dans la prise [1]. Ce cordon RJ11/ RJ11 sera
enfich dans l adaptateur pour pr ise tlphonique fourni.
Raccordez le cordon du combin, dans la pr i se sur l e ct du poste.
UTILISATION EN POSITION MURALE
Le post e a.50 peut t re mi s en posit ion murale en posit ionnant deux vis murales fournies dans les
emplacement s prvus cet ef fet au dos du post e.
Dcrochez le combin et ret ournez l ergot situ sous la bascule de raccroch [ 18]. Le combin peut alors t re
maint enu raccroch en posit ion murale.
En posit ion dcroch, le combi n peut aussi t re m ainte nu pos sur le post e grce un ergot [19] sit u sur la
part ie suprieure du poste. Le combin prvoit une fente qui vient senf icher sur l ergot poste.
UTILISATION EN MODE CASQUE
Vous pouvez raccorder un casque quip dune prise RJ11 [6] .
La pr ise de l igne et l e raccroch en mode casque s eff ectuent par la touche ;/ [16]. Le combindemeure ut i l isable. Le haut -par leur n est pl us act if en mode casque.
PERSONNALISATION
Mlodie de la sonnerieEEE
Un commut ateur sit u sous le post e permet de slect ionner la m lodie de sonnerie parmi 3.
Volume de la sonnerie
Un commut ateur sit u sous le poste perm et de slect ionner l e niveau de sonnerie parmi 3 : Elev, Moyen ou
Silence. En posit ion Silence , un appel ent rant est signal par cl ignotement du t moin d appel [3] .
Volume du haut-parleur
En mode haut-par l eur, par appui sur la t ouche ;/ [16], l e volume du haut par leur se rgle l aide destouches S et T [10] . L af f i cheur indique le volume slect ionn
Volume du combin
En mode dcroch au combin, le volume du combin se rgle l aide des t ouches S et T [10] . L af f i cheur
indique le volume slect ionn
-
7/31/2019 Manuel utilisateur telecom a50
4/16
a. 50 10. 2008 - 0ENFP2322- 3 4
Accs au menu Options
Un appui sur la t ouche [8] f ait apparat re l e menu OPTIONS . Par appui sur les touc hes S et T [10] ,
dif fr entes opti ons sont paramt rables. Validez l e sous-menu choisi par . La sort ie du menu OPTIONS s obt ient t out mom ent par un app ui sur ESC [9]
Alarme quotidienne
Lheure cl ignote. Fait es dfi l er les valeurs par S et T [10] et va l idez votre choix par [8]. Fait es de
mm e pour l es mi nut es. En validant ALARME ACTIVEE , cel le-c i se dclencher a chaque j our, comm eindiqu par le symbole l aff icheur . Choisissez PAS D ALARME pour supprim er l alarm e quot idi enne.
L a larme s te int par appui sur n impor te quel le t ouche.
Heure et Date
Lheure cl ignote. Fait es dfi l er les valeurs par S et T [10]. Validez par [8] .Les minut es cl ignotent . La procdure est i denti que et perm et ensuite de modif ier le j our puis le mois.
Aucun message
Permet de supprim er l indicat ion de message vocal . Validez par [8] .
Mmoriser N (Voir Rpert oire du post e )
Ce menu permet de crer 20 noms et num ros accessibles par les t ouches M1/ 11 M10/ 20.
Code protecti on (Voir Lim it er les appels )
Ce menu perm et de crer un code qui servira l imi t er les appels en int erdisant cert ains prf i xes.
Activer verrou (Voir Lim it er les appels )
Ce menu sert dfini r l es t rois sr ies de prf i xes int erdire.
Choix de la zone
Ce menu perm et de dfi nir un code de 1 5 chif f res qui correspond un prf ixe de num ro d appel. Si un
appel entr ant de plus de 7 chif f res prsente ce pr f ixe, le numro sera aff ich sans le prf ixe.
Dfinition du Flashing
Slectionnez la valeur par S et T [10]. Validez par [ 8] . Pour l a France, choisissez 300 Ms.
Numrotation Frquences Vocales (FV) ou Impulsions Dcimales (DC)
Slect ionnez le type de numrot at ion par S et T [10]. Validez par [8]
Contraste
Slect ionnez l un des huit niveaux de cont rast e aff icheur par S et T [10]. Validez par [8] .
Choix de la langue (franais, anglais, portugais, allemand, polonais, italien, espagnol)
Slect ionnez la langue d aff ichage par S et T [10]. Validez par [8]
Sort ie Options
Lcran revient au repos. Un ret our l tat repos s obt ient aussi t out m oment par ESC [9]
LIMITER LES APPELS
Crer le code de protect ion : Menu OPTIONS > CODE PROTECTION
Vous pouvez crer un code qui servira l im it er les appels en int erdisant cert ains prf i xes. Par dfaut , l e
code est 000. Pour modi f ier le code, saisir l e code en cours par ST [10] pour la valeur et [8] pour lavalidat i on. Saisir ensuite l e nouveau code de la mm e faon.
Dfinir les prfixes interdits : Menu OPTIONS > ACTIVER VERROU
Pour df inir les trois prf i xes int erdire, saisissez le code de prot ect i on par ST [10] et [8]. Si le
code est cor rect , saisissez par ST et les 3 prf ixes de 4 caractr es. Un prf ixe int erdit peut t re de1, 2, 3 ou 4 caractres, perm ett ant ainsi des rest r ict ions plus ou moins fort es. Ex.: Le prf ixe 01-- signif ie
quun appel commenant par 01 sera interdit .
-
7/31/2019 Manuel utilisateur telecom a50
5/16
-
7/31/2019 Manuel utilisateur telecom a50
6/16
a. 50 10. 2008 - 0ENFP2322- 3 6
Rappeler
Effacer les appels reus un
un ou en totalit
Pour rappeler un numro, ou appuyez sur ;/ [16]
Pour eff acer un numro, appuyez br ivement sur C [7 ] . A
laffichage de EFFACER APPEL , confirmez leffacement par C.
Pour ef facer t ous les numros, fait es un appui long sur C [7] . A
laffichage de EFFACER TOUS , confirmez leffacement par C.
Mmori ser dans le
rpertoire un appel r eu
En posit ion raccroch, fait es dfi ler les appels reus par S et T
j usq u au nu mr o mmor iser .Appuyez sur [13]. Le curseur cl ignot e et vous permet de saisir
ou modif ier l e nom associer.
Validez en appuyant deux fois sur .
Rcept ion d un message
vocal ( fonct ion disponibleselon abonnement oprat eur)
Sur l aff icheur, cl ignote et vous invit e consult er votr e bote
vocale. Rfrez-vous aux inform ati ons de votr e oprateur p our les
modalits de consultat ion.
Si l enveloppe ne disparat pas aprs consult at ion, voir l e paragraphe
Personnalisation
REPERTOIRE DU POSTE
Votre post e a.50 permet de mm oriser 119 numros rpart is en :
20 numros accessibles par appui direct des touches M1/10 M11/20. I l est possibl e de personnaliser
le mm o associ aux touches en tant le plast ique de prot ect i on.
99 enregistrements associant nom et numro du correspondant . Le nom est aff ich lors dun appel
reu d un correspondant m moris dans ce rpert oire.
Touches mmoires M1/10 M10/20[11]
Crer un enregistr ement
Depui s MENU OPTIONS , accde z MEMORISER NO , val id ez par
[8] .
Saisissez le nom (15 caractres maximum), validez par .
Saisissez le numro de t lphone (22 chif fr es maximum).
Appuyez sur l a t ouche M associer pour un en registr ement de M1
M10 ou [12] su i vi e de l a t ouche M pou r une mmoi r e M11 M20 .
Pour effacer un numro, i l faut crer un enregistrement vide
Consulter Appuyez sur la t ouche M souhait e pour M1 M10, ou [12] suivi ede la t ouche M pour M11 M20
Appeler ou en posit ion raccroch
Appuyez sur l a t ouche M pour un app el d e M1 M10. Pour un appel M11
M20, appuyez sur [12] suivi e de la t ouche MEn posit ion raccroch, ou ;/ [16].
-
7/31/2019 Manuel utilisateur telecom a50
7/16
a. 50 10. 2008 - 0ENFP2322- 3 7
Rpertoire alpha-numrique
Crer un enregistr ement
Appuyez sur [13]. CHERCHE clignote.
Par S ou T [10] , choisissez AJOUT . Validez p ar .
Saisissez le nom du correspondant (15 caractres maximum). Validez
par .
Saisissez le numro du correspondant (15 caractres maximum).
Validez par . Quit t ez le menu par ESC [ 9] .
ConsulterAppuyez deux f ois sur [13].
Par S ou T [10], choisissez l enregist rement consult er.
Quit t ez le menu par ESC [9]
Appeler En position raccroch, appuyez deux fois sur [13].
Par S ou T [10], choisissez l enregist rement appeler.
Appelez en dcrochant le combi n ou par appui sur ;/ [16]
Modifier
Appuyez sur [13] . CHERCHE cli gnote. Validez p ar .
Par S ou T [10], choisissez l enregist rement modif i er .
Appuyez sur . La premir e let t re du nom cl ignote. Saisissez le
nouveau nom. Validez par .
Saisissez le num ro du cor respondant . Vali dez par .
Quit t ez le m enu par ESC [9]. Lenregistrement est mm oris.
Effacer Appuyez sur [ 13]. CHERCHE cli gnote. Validez p ar .
Par S ou T [10], choisissez l enregist rement effacer.
Appuyez sur C [7]. EFFACER ? apparat. Validez par C .
DECLARATION DE CONFORMITE
Le marquage CE att est e que vot re poste a.50 est conform e la direct ive europenne 1999/ 5/ CE(R&TTE).
Vous pouvez obtenir une copie complte de cette dclarat ion sur www.adept- telecom.com.
REMARQUES RELATIVES AUX PILES ET A LA PROTECTION DE L ENVIRONNEMENT
Ne jamais ouvr ir l e compart iment pi les, ni met t re ou changer les pi les quand le post e a.50 est rel i la
l igne tlphonique. Dbrancher d abord le post e.
Respecter le sens de polar it . Respecter le t ype de pi les recommandes, en ne m langeant pas des pi les de
t ypes dif fr ents. Ne pas mlanger pi l es neuves et usages. Changer t outes les pi les en mme t emps, par des
piles neuves, ident iques entre el les.
Les bornes des pi les ne doivent pas tr e mi ses en court -circuit . Ne pas recharger les pi les ni t enter de les
ouvr ir .
Conform ment aux rglement at i ons en vigueur, les appareils et batt er ies ident if i es par le symbole ne
doivent pas t re j et s avec les ordures mnagres. I ls doivent tr e dposs dans un centr e de rcuprat ion
rserv cet ef f et .
-
7/31/2019 Manuel utilisateur telecom a50
8/16
a. 50 10. 2008 - 0ENFP2322- 3 8
Engli sh Language
1 2 - 6 Connect ions for Line (1 ), Modem (2 DATA), Headset (6 )
3 - 5 Incoming call s LEDS, for any call (3), for mi ssed call s (5 )
4 Til t able display.
7 10 Keys for corr ect i on (7 C) , val idat ion (8 ) , escape and lock (9 ) , volume and scrol l i ng (10
VOLST)
11 Memory keys for M1 t o M10 and M11 t o M20
12 Shif t key t o M11 / M20 mem ories
13 Repertory, 99 alphanumeric entr ies
14 R Flashing
15 Bis Redial / Pause
16 Hands Free ;ou hang up / hang off wit h headset
17 Secret to mut e micro
18 - 19 Clips for wall -mount ed posit ion : hang off cl ip (18) rest ing cl ip (19)
-
7/31/2019 Manuel utilisateur telecom a50
9/16
a. 50 10. 2008 - 0ENFP2322- 3 9
In this quick reference guide, means Pick up .
indicat es a manual operat i on or a sequence of operat ions t o be perfor med in an order shown by ,
, or . [Figures] ref er t o i l l ust rat i on previous page
PRESENTATION
a.50 is compatibl e wi t h ADEPT Telecom PBXs and can be connected t o t he analogue public t elephone netw ork
(PSTN). Before conne ct ing a.50 t o anot her t ype of PBX, pl ease check compliancy wit h your equipment
supplier.
a.50 includes a RJ11 dat a port DATA [2]. This socket al lows a modem t o be connected on t he l ine.
SETTING UP
Before ini t ial use or programming, your a.50 t elephone must be power ed by t hree LR6 AA batt er ies. They
should be placed in the compart ment on the underside of t he tel ephone. The line cord must be removed
before you insert the bat teries for t he fir st t ime and when you change the batt eries.
Once you have insert ed the bat t er ies, plug t he l ine cord int o the corresponding jack [1] . This RJ11 /RJ11 cord wi l l b e plugged int o the supplied t elephone socket adapt or.
Plug the handset cord int o the corresponding j ack on the side of t he tel ephone.
WALL-MOUNTING
Th e a.50 t elephone can be wall-m ounted by placing the t wo supplied w all-mount ing screws into t he holes on
the underside of the telephone.
Li f t the handset and rotate t he c l ip [18] l ocated below t he handset rest . The handset wi l l then be held in
place when wal l -mounted.
The handset can also be left on the t elephone dur ing a call t hanks t o a cl ip [19] on t he upper part of t het elephone. The handset has a slot for hanging it on t he t elephone cl ip.
HEADSET MODE
A RJ11 connection headset can be plugged [6] .
Picking up and hanging up are made b y ;/ key [16].
In headset mode, handset can st i l l be used. Loudspeaker is not available in t his mode.
PERSONNALISATION
Ringer melodyEEE
A swit ch under t he tel ephone al lows you to choose fr om 3 r inger mel odies.
Melody Cont rol
A swit ch under t he t elephone al lows you to choose fr om 3 r inger volume l evels: High, Medium or Silence. In
the Si lence m ode, the cal l indi cator f lashes t o signal incoming calls [3] .
Loudspeaker volume
In hands-free mode by pressing the ;/ key [16], t he loudspeaker volume can be set w it h S and T[10] .
Receiver volume
.The receiver volume can be set w it h S an d T [10] .
-
7/31/2019 Manuel utilisateur telecom a50
10/16
a. 50 10. 2008 - 0ENFP2322- 3 10
Accessing the Opt ions menu
The [8] but t on displays t he OPTIONS MENU . Various opti ons can be confi gured by pressing S and T
[10]. Confirm the selected sub-menu with . Escape from any menu set t ing wit h ESC [9]
Daily alarm
The hours f l ash. Scrol l t hrough the values wit h S and T [10] . Conf i rm wi th [ 8 ] .
The minut es f l ash. The pr ocedure is identical. Set ALARM ON for a daily remi nder indi cated by on the
display. Alarm w il l buzz for one m inut e and can be st opped by pressing any key
Time and Date
The hours f l ash. Scrol l t hrough the values wit h S and T [10] . Conf i rm wi th [ 8 ] .
The minut es f l ash. The pr ocedure is identical and can also be used t o change t he day and mont h.
Message Wait ing
Al low s you t o de lete t he voi cema il i nd i ca tor . Conf i r m w i t h [ 8 ] .
Storing memories (See Telephone Direct ory )
You can create 20 mem ories (numbers and names), st ored under M1/ 11 to M10/ 20 keys.
Pin code (See Calls Rest ric t ion )
You can create a code to f orbid call s t o specif ic pref ixs.
Key Lock (See Calls Rest ri ct ion )This menu def ines t he 3 pref ixs to forbi d
Local Area Code
Up to 5 digits area code can be set . I f an incoming call num ber, l onger t han 7 digits, begins wit h t he area
code, cal l number w i l l be d isplayed wi t hout t hat code.
Def ini t ion of Flashing (SET FLASH TIME)
Select t he value wi th t he S and T but t ons [10] . Conf i rm w i t h [ 8 ] .
Dial Mode
Select t he di all ing m ode TONE or PULSE wit h ST [10] . Conf i rm wi th [8]
Contrast
Select one of t he eight display contr ast levels wit h ST [10] . Conf i rm wi t h [8]
Language selection (French, English, Portuguese, German, Polish, Italian, Spanish)
Select t he display language wi t h ST [10] . Conf i rm wi t h [8]
Exit Options
The display ret urns to idl e mode. You can also ret urn t o idle mode at any t i me by ESC [9]
CALLS RESTRICTION
Creat e Pin Code : OPTIONS > SET PIN CODE
You can create a code to f orbid call s to specif i c pref ixs. Default code is 000. To create or change code,
enter t he cur rent p in code by ST [10] and [8]. I f current code is OK, create t he new code by ST
[10] and [8] .
Creat e key locks : OPTIONS > SET KEY LOCK
To def ine t he 3 pref ixs to f orb id, enter t he p in code by ST [10] and [8]. I f code is OK, enter by ST
and the 3 forbidden pref ixs. Depending on the number of digit s, f rom 0 to 4, restr i ct i on can be moreor less strong. Eg.: Prefix 01forbids a call beginning with 01.
Acti vat ing Key lock protecti on
Press ESC [9] and dial the pin code. LCD displays t he prot ect ion level . Select LOCK ON or LOCK
OFF wit h ST [10] e t [8] .When protect ion is act ive, cal ls beginning wit h f orbidden codes are rej ected. LCD displays LOCK
-
7/31/2019 Manuel utilisateur telecom a50
11/16
a. 50 10. 2008 - 0ENFP2322- 3 11
CALLS MADE: CALLING, CONSULTING, STORING
During a call , the number called and the total durat ion of the current cal l are displayed.
To make a callYou can dial t he number before or aft er
Press ;/ [16], t o make a call in hands fr ee mode. I f a headsetis det ected, conversati on wil l be held wi t h headset. Headset and Hands
free mode are not compl iant .
To redial the last external
number dialledUse t he [15] but t on for a handset or hands- f ree cal l .
Insert a Pause in a number Use t he [15] key t o insert a 3.6 seconds pause in a dial l ed or
memory stored number
To consult a list of the last
10 called numbers
To redial a number
To delete a number
In idle stat e, press [ 15] .
Use ST [10] t o scrol l t hrough the numbers dial led
You can redi al t hese numb ers by or pressing ;/ [16].
You can delete each number by pressing C [7 ] . Conf i rm t he dele t ion
by pressing C . Delete al l cal ls wit h a longer pressing on C .
To add a number dialled to
the directorySelect the number to store (See To Consult)
Press [13]. The cursor f l ashes and you can enter a name to be
associated with i t .
Press tw ice to con f i rm.
CALLS RECEIVED: ANSWERING, CONSULTING RECEIVED, ANSWERED AND MISSED CALLS, STORING
When receiving a call, LED [3] is blinking. Non answered calls are indicated by flashing LED [5]. Blinking stops
as list of calls is consulted.
When the t elephone is in idle m ode, t he display indicat es t he tot al number of r eceived calls (CALL) and the
numb er of mi ssed call s (NEW).
Receiving a callIf CLIP service is provided, the caller's number is displayed along with
it s posit ion in the call l ist
To answer a call or press ;/ [16] f or a hands-free call
To consult the list of
received calls
To redial a number
To delete received calls
individually or as a whole
When t he tel ephone is idle, scrol l t hrough t he received calls wit h Sand T [10]. The l ist can contain up t o 99 entr ies. The missed calls are
identified by "NEW".
You can redi al t hese numb ers by or pressing ;/ [16].
Press C [7] br ief ly t o delete a number . Press "C" to conf i rm t he
delet ion. Delete al l cal ls wit h a longer pressing on C .
To add a received call t o
the directory
When the tel ephone is idle, scrol l t hrough t he received calls wit h S
and T [10] unt i l you reach the number you want to store.
Press [13]. The cursor f l ashes and you can enter or m odify a
name to be associated w it h i t .Press tw ice to con f i rm.
-
7/31/2019 Manuel utilisateur telecom a50
12/16
a. 50 10. 2008 - 0ENFP2322- 3 12
Receiving a voicemail
message (See Operator foravai labi l i ty)
f l ashes on the di splay and invit es you to check t o your voicemail.
Refer t o t he informat ion provided by your operat or for t he condi t ions
of u se.
Please read the "Personalisation" section if the envelope does not
disappear once you have li st ened t o your m essages.
TELEPHONE DIRECTORY
Your a.50 t elephone can st ore up t o 119 numbers:
20 numbers can be dialled directl y by pressing the M1/10 to M11/20 but tons. You can personalise t he
memo associated with these buttons by removing the plast ic protect ion.
99 entries with the caller's name and telephone number. The name is displayed w hen you receive a call
f rom a cal ler stored in th is d i rectory.
Memory buttons M1/11 to M10/20
To create an entry
From [ 8] OPTIONS MENU, go t o STORE NUMBER . Valid at e
Ent er the name (up t o 15 characters). Confir m wi t h
Ent er t he number (up t o 22 digit s) .
Press t he corr espondin g M key for M1 t o M10 recor d or [12]
fol l owed by M key for M10 to M20 record.
To consult your directory Press t he desired M key for M1 t o M10 record or [12] fol lowed byM key t o consult a M10 to M20 record
To make a callor st ay in idle mode
Press t he desired M key for M1 t o M10 record or [12] fol l owed by
M key to cal l a M10 t o M20 record
In idle mode, or press ;/ [16] f or a hands-free call
Alphanumeri c dir ect ory
To create an entry
Press [13] . SEARCH fl ashes.
Choose ADD wit h theS
an dT
[10] . Conf i rm wi th
.Ent er t he caller 's name (up to 15 characters). Confirm wit h .
Ent er t he caller 's number (up t o 15 digit s) . Confi rm w it h .
Press ESC to ex i t the menu.
To consult an entry Press [ 13] t w i ce.Use ST [10] t o select t he entry you want t o consul t .
To call an entryFrom idle stat e, pr ess [ 13] t w i ce.
Use ST [10] to select t he entry you want t o cal l .
or press ;/ [16] f or a hands-free call
-
7/31/2019 Manuel utilisateur telecom a50
13/16
a. 50 10. 2008 - 0ENFP2322- 3 13
To modify an entryPress [13]. SEARCH f l ashes. Confi rm w it h .
Choose t he entry you want t o modi fy wi t h ST [10]
Press . The f i rst le t t er in t he name f l ashes. Enter the new name.
Conf i rm wi th .
Ent er t he caller 's number. Confir m wi t h .Press ESC t o ex i t .
To delete an entr yPress [13]. SEARCH f l ashes. Confirm w it h .
Use t he S and T but t ons to select t he entr y you want t o delete.
Press C . DELETE CALL? appears. Confi rm wi t h C . Press ESC t o
ex i t .
DECLARATION OF CONFORMITY
The CE mark conf irm s t hat your a.50 t elephone is in compliance wit h t he 1999/ 5/ EC (R&TTE) European
direct ive.
NOTES ON BATTERIES AND ENVIRONNEMENT PROTECTION
Never open the bat tery compar tm ent or inser t / change the bat t er ies when the a.50 t elephone is connected
to the te lephone l ine. F i rst d isconnect t he te lephone.
Make sure that the battery polar it ies are correct.
Only use t he recommended bat t ery type, and do not mix d i f f erent t ypes of bat t er ies. Do not m ix new and o ld
bat ter ies.
The battery terminals should not be short-circuited. Do not recharge the batter ies or try to open them.
The batt er ies in your a.50 t elephone must not be thr own int o a f i re. You must di spose of t hem in a dedicated
recycling centre.
In compliance wit h laws, devices and batt er ies marked wi t h must not be disposed of wit h household
wast e. You must d ispose of t hem in a dedicated r ecycling centre. Ot herwi se, you may be subj ect t o penalt i es.
-
7/31/2019 Manuel utilisateur telecom a50
14/16
a. 50 10. 2008 - 0ENFP2322- 3 14
NOTES
Numros directs / Direct memories
Rpertoire
Directory
Numro de t lphone
Telephone Number
Nom
Name
M 1
M 2
M 3
M 4
M 5
M 6
M 7
M 8
M 9
M 10
M 11
M 12
M 13
M 14
M 15M 16
M 17
M 18
M 19
M 20
-
7/31/2019 Manuel utilisateur telecom a50
15/16
a. 50 10. 2008 - 0ENFP2322- 3 15
NOTES
-
7/31/2019 Manuel utilisateur telecom a50
16/16