Lhd Toro 410
Transcript of Lhd Toro 410
-
7/21/2019 Lhd Toro 410
1/16
Sandvik Mining and Construction
LH410 (TORO 7)
From the underground experts
LH410 (TORO 7)
From the underground experts
-
7/21/2019 Lhd Toro 410
2/16
Sandvik Mining and Construction
What is CORE
EFFICIENCY RELIABILITY
SAFETY ERGONOMICS
Lowest cost per loaded tonLowest cost per loaded ton
TORO LHDs made withextensive experience &
strongprofessional expertise
TORO LHDs made withextensive experience &
strongprofessional expertise
Excellent operatorconcentration throughcomfortable working
environment
Excellent operatorconcentration throughcomfortable working
environment
Built-in safety features toprotect the operator & the
machine
Built-in safety features toprotect the operator & the
machine
Note: The pictures on this presentation are not necessarily taken from this exact machine
-
7/21/2019 Lhd Toro 410
3/16
Sandvik Mining and Construction
Built-in safety
Operator safety ROPS & FOPS certified operators compartment Easy access into the canopy/cabin
Enhanced visibility
Efficient lights
Posi-Stop brakes
Low exhaust emission level with Tier III engine
Ground level daily maintenance 4-point safety belt (opt.)
Machinery safety Efficient cooling arrangement
Diagnostics with control system
-
7/21/2019 Lhd Toro 410
4/16
Sandvik Mining and Construction
Easy maintenance
Fast and easy ground level daily maintenance
Checking points for hydraulic oil, coolant level, engineoil and air filter
Quick fill couplings for fluids
Built in diagnostics / troubleshooting alarm log
Dog bone with grease channels
Easy to clean engine cooler
Automatic central lubrication (opt.)
-
7/21/2019 Lhd Toro 410
5/16
Sandvik Mining and Construction
Ergonomics
Adjustable seat and arm rests with joysticks
Well located pedals Main functions controlled with joystick buttons
(gears, driving directions, horn, wipers, bucket
shaking, DeClutch, ejector bucket (opt.))
All operational functions on one LCD panel no
gauges
Selectable automatic/manual gearing
Cabin units
Rubber mounted & isolated Efficient air conditioning
Seat with low frequency suspension as standard
-
7/21/2019 Lhd Toro 410
6/16
Sandvik Mining and Construction
Power unit
Mercedes OM926LA, 220 kW engine
EURO stage III and Tier III approved
Engine diagnostics & protection
Fault codes on LCD display
Easy accessibility to all maintenance points
Long engine oil change interval
Low noise hydraulic driven fan
-
7/21/2019 Lhd Toro 410
7/16
Sandvik Mining and Construction
Axles
Dana SOH, 43R 175 - Hercules series axles
Slack adjustale Posi-Stop brakes as standard Smooth braking
New series Posi-Torq without springs in front axle
Up to 72 % torque transfer to the higher traction wheel
No-Spin at rear axle
100 % torque transfer to the higher traction wheel
Reduced wheel spin -> longer tyre life
Better traction in upgrade loading
Higher reliability and lifetime
Lower torque ratio in ring and pinion and higher in the hubs
More durable bearings
-
7/21/2019 Lhd Toro 410
8/16
Sandvik Mining and Construction
Hydraulics
Safe and reliable components
Piston type hydraulic accumulator
Robust & serviceable solution
Only one accumulator needed
Hydraulic oil return filter with high filtration degree
-> Long component lifetime
New type cylinder seals
-> No adjusting or maintenance required
New series Parker gear pumps
Better efficiency
Lower hydraulic oil temperature
-
7/21/2019 Lhd Toro 410
9/16
Sandvik Mining and Construction
Hydraulics
Simplified component layout Easy access to all main components
Optimized valve control with new control system
Smooth steering, sharp boom and bucket movements
-
7/21/2019 Lhd Toro 410
10/16
Sandvik Mining and Construction
Cooling
New engine cooling arrangement
Radiator with hydraulic driven fan with adjustablepiston pump drive (adjusts automatically dependingon temperature) Lower noise level and better fuel economy
Fan located on the outside of the unit with hinges
Mesabi V-core radiator with changeable tubes Easy to clean
Separate transmission and hydraulic oil cooler
Reliable operation in high ambient temperature
-
7/21/2019 Lhd Toro 410
11/16
Sandvik Mining and Construction
Reliable electrics
Industrially fabricated wiring harnesses High industrial level quality
Reliability
Fast and easy repair
Enhanced solutions Stainless steel junction boxes
Accurate and robust temperature and pressure sensors
All information on one 5,7 LCD display No analog gauges needed
Less components -> Less spare parts
Intergrated warnings and alarms
Built-in tools for diagnostics
-
7/21/2019 Lhd Toro 410
12/16
Sandvik Mining and Construction
Easy troubleshooting
Function chain
Interlocks
0 02,50 00
Troubleshooting without electrical schematics and multimeter
Hydraulic and electrical faults quickly isolated
Entire function chain in one window
No special tools needed
-
7/21/2019 Lhd Toro 410
13/16
Sandvik Mining and Construction
Easy troubleshooting
Warnings and alarms for:
Engine alarms from Engine Control Module (ECM) Temperatures and pressures
Oil levels
Central lubrication failures
Control system component failures
Connection failures Sensor failures
Filter blocking
All stored in log file
Browsing on display
Downloading with standard laptop
Warning pop up at 105
Alarm pop up at 110
-
7/21/2019 Lhd Toro 410
14/16
Sandvik Mining and Construction
Customer benefits
of the control system
Machine availability
Less machine stopping failures Less time spent on troubleshooting
Automation compliant
Radio Remote Control AutoMine
Monitoring systems
Machine usability
Automatic gear shifting
Ergonomic controls
-
7/21/2019 Lhd Toro 410
15/16
Sandvik Mining and Construction
Sandvik LH410
Technical data
Length: 9,7 m (381)
Maximum width: 2,6 m (100) (Depending on selected bucket) Height: 2,5 m (99) Ground clearance: 420 mm (17) Tramming capacity: 10 000 kg (22 000 lb) Operating weight: 26 200 kg (57 760 lb) Tunnel size:3,5 m x 3,5 m tunnel (depends on local regulations)
Bucket range: 4,0 m - 5,4 m (5.2 yd - 7.0 yd) Engine: Mercedes OM926LA, 220 kW Transmission: Dana RT33425 Converter: Dana C5502 Axles: Dana 43R 175
-
7/21/2019 Lhd Toro 410
16/16
Sandvik Mining and Construction
4193 (165)
2485(98)
2550
(100)
2400(95)
131197JMI
3-298972
R3285
(129
)
R65
15(256
)
42.5
420 (17)
5377
(212)
1745 (69)
1905(
75)
3554
(140)
10199 (402) 1268
(50)
810(
32)
3500 (138)
2395
(94)
177
0(
70)
4.6m(6.0 yd)
9681 (381)
3017 (119) 3164 (125)
35
14
NOTE:Rights reserved for changing
some dimensions