LCD Display Wall

[LM55P3]

LCD Display Wall

S-188-7-CA017-D KYO 1812(IP)

HEAD OFFICE: TOKYO BLDG., 2-7-3, MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPANwww.MitsubishiElectric.com/bu/displaywall

n LCD technology is susceptible to imagine persistence when showing the same static image for long periods of time.n Service parts for this product are only stocked for five years after model production is discontinued. n HDMI, the HDMI logo and High-Definition MultiMedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.n Intel® is a registered trademark of Intel Corporation in the U.S. and other countries.n DisplayPortTM is a trademark of the Video Electronics Standards Association, registered in the U.S. and other countries.n All information contained herein is subject to change without prior notice.n Other brand, product, and service names are trademarks or registered trademarks of the respective companies.n Product appearance in this brochure does not imply that Mitsubishi Electric Corporation intends to make it available in all countries where the company and its subsidiaries operate.n Screen displays of the photographs in this brochure are simulated images only.n Repairs or exchanges related to the deterioration of LCD due to continuous operation and panel aging, such as brightness or color changes, after-image retention or burn-in and the like, are not covered under warranty.n HD Base T TM is a registered trademark of HD Base T Alliance.

Connector Terminals Options

BR-LM1KKFront-access wall mount bracket 3G SDI Board

DP-1SDI-3GLong-distance transmissionsupporting HDBaseT via aCAT6(STP) cable is possible.

VC-LM1HDRemote controllerwith an IR sensor cable

DP-02RK

IR sensor cable

9

432 5 6 7 81

1 LAN connector

2 Remote controller connector9 OPS slot

4 DVI-D in

5 DisplayPort in

6 D-SUB in

Others (Side Terminals)• DisplayPort out• SPDIF• AUDIO out

3 RC-232C connector

8 USB (For factory use)

7 Audio in

Specification

Dimensions (W × H × D) *1 Screen surface treatment Mullion size (Total) Resolution Screen size Backlight Lifetime Viewing angle

Maximum stack height

Brightness

Contrast ratio Display colors

Input connectors

Output connectors

Control signals Optional input board slot Power consumption (without OPS)Voltage range Weight

Conndition for operation

Landscape PortraitHigh brightStandard

VideoAudio

Control

VideoAudioControl

High brightStandard

1211.9 × 682.7 × 99 mm (excluding handles) (47.7 × 26.9 × 3.9")Anti-glare (haze 44 %)

1.8 mm (min.)*1

Full HD (1920 × 1080 pixels)55" diagnoal (H: 1209.6 mm / V: 680.4 mm)

LED (Direct)60,000 hours (typ.)*2

178° (CR>10)6 units (at 5 - 30 ℃ ambient temperature*3)

3 units700 cd/m2 (typ.)500 cd/m2 (typ.)

1200:1 (typ.) / 240,000:1 (local dimming)1.07 billion (10-bit)

DVI-D (with HDCP) x1, DisplayPortTM (1.2a)*4 x1, D-sub 15 x13.5 mm phone jack

RS-232C: 2.5 mm phone jack, LAN: RJ45 (10BASE-T/100BASE-TX),Wired remote: 3.5 mm phone jack, IR receiver

DisplayPortTM (1.2a)*4 x13.5 mm phone jack, SPDIF (optical digital audio output)

RS-232C: 2.5 mm phone jack , Wired remote: 3.5 mm phone jackRS-232C × 1, LAN (RJ45) × 1, Wired remote: 3.5 mm phone jack, IR receiver

Intel® OPS slot ×1*5

250 W (typ.)180 W (typ.)

AC 100 - 240 V ± 10%, 50/60 Hz ± 1Hz25 kg (55.1 lbs)

5 - 35 °C (41 - 95 °F) 20 – 80 % relative humidity

LM55P3

1211.9

682.

7Dimensions

Model

Unit: mm

*1: When using with BR-LM1KK, the optional wall mount frame: A certain additional psysical gap is required to draw the monitors out for maintenance. About 1 mm is recommended.*2: No image staining occurs even in 24-hour operation, although the image persistence would still happen if a static image is displayed for a long term.*3: When the ambient temperature rises over 30 ℃, the max stack height will be up to 4 in high bright mode.*4: Can receive a DisplayPort™ SST (single-stream transport) signal. For example, a regular 3840 x 2160 pixel image from a signal source can be displayed natively on a 2x2 of LCD wall through daisy chaining.*5: OPS is a controller module and slot standard for digital signage produced by Intel® Corporation.

Revised publication effective Dec. 2018.Superseding publication S-188-7-CA017-C Oct. 2017.Specifications are subject to change without notice.

107 (To handles)99

Full high-definition monitor withnear-seamless, extra-thin 1.8mm bezel

Our ultra-thin 1.8mm bezels produce multiple display images that are v i r tua l ly seamless wi th gr id l ines that are a lmost invisible.

Full HD (1920 x 1080)55"(Viewable image size: 1209.6x680.4)Bezel width: 0.9mm(Upper/Left) / 0.9mm(Bottom/Right)

High Definition. High Contrast. Extra narrow bezels smoothly integrateinto multi-screen applications creating virtually seamless images.

Evolving large-screen imaging systems for today's visual information society.Mitsubishi Electric multi-screen displays contribute to ensuring the smooth flowof information in public spaces such as airports and train stations.

Approx. 1.8mm minimum

Frame compensation off Frame compensation on

* The minimum design value is 1.8mm; however, depending on the product and instal lat ion conditions, the joint width may be larger than 1.8mm.

* DS280 is product of Advantech, Co., Ltd. Please contact the nearest dealership.

Tiling compatibility withframe compensation

Frame compensation supports up to 225 displays in 15×15 configuration to avoid image distortion at the seams, ensuring image accuracy when spread across multiple screen displays.

Equipped with Intel® OPS SlotLM55P3 is equipped with an Open Pluggable Specification (OPS) slot. Simply install the optional computer board* to expand the scope of applications. A variety of peripheral equipment can be connected quickly and easily.

Optional Front-access WallMount Bracket

Exclusively designed for Mitsubishi LCD panels, the BR-LM1KK wall mount allows each panel to be easily accessed from the front of the display, making service and maintenance simple in either landscape or portrait installations.

Full HD, LED-backlit LCD Panelswith Extra-narrow Bezel

Commercial-grade LED-backlit panels with high brightness and contrast. The panels also feature an extra-narrow bezel that minimises image content loss, a critical factor in multi-screen applications.

Other Features

LM55P3

• Digital Zoom• SDI Connection (Option)

• Programmable Scheduling• Screen-saver

• LAN Control• Display Port

• Remote Control (Option)• HDBaseTTM Input Board (Option)

Reverse scan Reverses direction of image scanning to smoothly play enlarged video on multiple displays.

Reverses scan mode off Reverses scan mode on

LCD Display Wall

[LM55P3]

LCD Display Wall

S-188-7-CA017-D KYO 1812(IP)

HEAD OFFICE: TOKYO BLDG., 2-7-3, MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPANwww.MitsubishiElectric.com/bu/displaywall

n LCD technology is susceptible to imagine persistence when showing the same static image for long periods of time.n Service parts for this product are only stocked for five years after model production is discontinued. n HDMI, the HDMI logo and High-Definition MultiMedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.n Intel® is a registered trademark of Intel Corporation in the U.S. and other countries.n DisplayPortTM is a trademark of the Video Electronics Standards Association, registered in the U.S. and other countries.n All information contained herein is subject to change without prior notice.n Other brand, product, and service names are trademarks or registered trademarks of the respective companies.n Product appearance in this brochure does not imply that Mitsubishi Electric Corporation intends to make it available in all countries where the company and its subsidiaries operate.n Screen displays of the photographs in this brochure are simulated images only.n Repairs or exchanges related to the deterioration of LCD due to continuous operation and panel aging, such as brightness or color changes, after-image retention or burn-in and the like, are not covered under warranty.n HD Base T TM is a registered trademark of HD Base T Alliance.

Connector Terminals Options

BR-LM1KKFront-access wall mount bracket 3G SDI Board

DP-1SDI-3GLong-distance transmissionsupporting HDBaseT via aCAT6(STP) cable is possible.

VC-LM1HDRemote controllerwith an IR sensor cable

DP-02RK

IR sensor cable

9

432 5 6 7 81

1 LAN connector

2 Remote controller connector9 OPS slot

4 DVI-D in

5 DisplayPort in

6 D-SUB in

Others (Side Terminals)• DisplayPort out• SPDIF• AUDIO out

3 RC-232C connector

8 USB (For factory use)

7 Audio in

Specification

Dimensions (W × H × D) *1 Screen surface treatment Mullion size (Total) Resolution Screen size Backlight Lifetime Viewing angle

Maximum stack height

Brightness

Contrast ratio Display colors

Input connectors

Output connectors

Control signals Optional input board slot Power consumption (without OPS)Voltage range Weight

Conndition for operation

Landscape PortraitHigh brightStandard

VideoAudio

Control

VideoAudioControl

High brightStandard

1211.9 × 682.7 × 99 mm (excluding handles) (47.7 × 26.9 × 3.9")Anti-glare (haze 44 %)

1.8 mm (min.)*1

Full HD (1920 × 1080 pixels)55" diagnoal (H: 1209.6 mm / V: 680.4 mm)

LED (Direct)60,000 hours (typ.)*2

178° (CR>10)6 units (at 5 - 30 ℃ ambient temperature*3)

3 units700 cd/m2 (typ.)500 cd/m2 (typ.)

1200:1 (typ.) / 240,000:1 (local dimming)1.07 billion (10-bit)

DVI-D (with HDCP) x1, DisplayPortTM (1.2a)*4 x1, D-sub 15 x13.5 mm phone jack

RS-232C: 2.5 mm phone jack, LAN: RJ45 (10BASE-T/100BASE-TX),Wired remote: 3.5 mm phone jack, IR receiver

DisplayPortTM (1.2a)*4 x13.5 mm phone jack, SPDIF (optical digital audio output)

RS-232C: 2.5 mm phone jack , Wired remote: 3.5 mm phone jackRS-232C × 1, LAN (RJ45) × 1, Wired remote: 3.5 mm phone jack, IR receiver

Intel® OPS slot ×1*5

250 W (typ.)180 W (typ.)

AC 100 - 240 V ± 10%, 50/60 Hz ± 1Hz25 kg (55.1 lbs)

5 - 35 °C (41 - 95 °F) 20 – 80 % relative humidity

LM55P3

1211.9

682.

7Dimensions

Model

Unit: mm

*1: When using with BR-LM1KK, the optional wall mount frame: A certain additional psysical gap is required to draw the monitors out for maintenance. About 1 mm is recommended.*2: No image staining occurs even in 24-hour operation, although the image persistence would still happen if a static image is displayed for a long term.*3: When the ambient temperature rises over 30 ℃, the max stack height will be up to 4 in high bright mode.*4: Can receive a DisplayPort™ SST (single-stream transport) signal. For example, a regular 3840 x 2160 pixel image from a signal source can be displayed natively on a 2x2 of LCD wall through daisy chaining.*5: OPS is a controller module and slot standard for digital signage produced by Intel® Corporation.

Revised publication effective Dec. 2018.Superseding publication S-188-7-CA017-C Oct. 2017.Specifications are subject to change without notice.

107 (To handles)99