Considération des supports de fabrication additive pour le ...
La normalisation de la Fabrication Additive Quelles ......Catia V5, Solidworks, Magics Production...
Transcript of La normalisation de la Fabrication Additive Quelles ......Catia V5, Solidworks, Magics Production...
-
La normalisation de la Fabrication Additive
Quelles orientations
3D PRINT - 05/06/2019
-
AGENDA
• Présentation des enjeux de la Fabrication additive pour le secteur industriel et aéronautique notamment
• Le positionnement de la FA Plastique / Métal (éviter les redondances avec les autres présentations)
• Le positionnement de la FA en Normandie / Cartographie des acteurs normands (changement de programme, car ce thème était prévu d’être abordé en fin de journée)
-
Quelques chiffres
• 7,3 Milliards de dollars en 2017 - +20% / an
• Une utilisation pour la production de plus en plus forte
• +100% offre d’emploi en impression 3D en France en 2017
• France = 3% du parc mondial (USA = 40%)
• 17 normes – 5 référentiels
-
Qui sommes nous …
Normandie AeroEspace est la filière d’excellence en Normandie dans l’aéronautique, le spatial, la défense et la sécurité.
Le réseau NAE est constitué de 153 membres et représente plus de 20.000 salariés pour 3 milliards d’Euros de chiffre d’affaires en 2017.
Normandie AeroEspace est en soutien de la Direction Générale des Entreprises (DGE) sur l’activité normalisation de la Fabrication Additive pour :
• Promouvoir les activités de normalisation de la Fabrication Additive• Faciliter l’accès aux informations de la normalisation Fabrication Additive• Participer à la construction des normes de demain
-
VOLUM-e,POINTS DE REPÈRE
3DS : UNE HOLDING FAMILIALE (Entreprises multi-secteurs)
MMB : L’activité maquette a démarré il y a près de 50 ans.
VOLUM-e : L’activité démarre en 2000 (MB Proto), chgt Nom 2015
• CA 7,2 M€ / 55 personnes• Outil de Production pour la pièce unique et la petite série• FABRICATION ADDITIVE : 25 ans d’expérience• Certifications : ISO 9001 version 2015 et EN 9100.• Qualifications procédés spéciaux Ariane, Safran, Thales
-
Présentation de Volum-E
DesignCréation/Co-design/ModélisationScan/Retro-conception
Catia V5, Solidworks, Magics
ProductionFabrication Additive Métallique
Fabrication Additive Plastique
Contre typage sous vide/Usinage 5 axes
QualificationISO 9001/EN 9100
7 machines qualifiées procédés spéciaux
R&TProjets Européens depuis 2000Développement de nouveaux matériaux
Normalisation Fabrication Additive
-
Normalisation : fondamentaux
• 7,3
-
Structure Française : UNM 920
Projet Interne, Inconel 718
Injecteur, Inox 17-4ph
L’AFPR
Fournisseurs de poudre (métallique et plastique)
Fabricants de machines
Fabricants de pièces
Utilisateurs (industrie mécanique, aéronautique, médical)
Centres techniques, Le LNE et des laboratoires académiques
➢ Normes publiées en France
➢ Coordination en France par la commission UNM 920
✓ Participants : 93 inscrits
Vocabulaire: NF EN ISO/ASTM 52900
Formats de fichiers NF EN ISO/ASTM 52915
Sys. de coord. Et méthodes d’essai NF EN ISO/ASTM 52921
Spéc. tech. des poudres: NF E 67-010:2013 -> ISO/ASTM 52097
Exigences pour l’achat de pièces NF ISO/ASTM 52901
Vues d’ensemble des procédés NF EN ISO 17296-2
Caractéristiques et méthodes d’essais NF EN ISO 17296-3
Formats de fichiers NF EN ISO 17296-4
-
Structure Française : UNM 920
Poudre Métalliques (17)
Définition de pièces Types
Exigences médicales (12)
Sécurité (17)
Appareil sous pression (8)
Sécurité des données (AA) Métaux (Aluminium; Titane; Nickel; Inox ) (21)
➢ Mode de fonctionnement
➢ Groupes Ad-hoc de réflexion
Pour participer votre organisation doit être membre
Une fois membre vous nommez un ou plusieurs experts
Les experts peuvent participer à tous les travaux français de leur choix
Chaque experts peut participer au travaux internationaux: ISO et CEN
… Voir Dispositif
-
Structure ISO/ASTM
ISO TC 261 / ASTM F42 : Dual Standard !
-
Structure ISO/ASTM
➢ International coordination by the l’ISO/TC 261▪ 23 membres
First meeting in july 2011 Scope : Standardization in the field of Additive
Manufacturing (AM) concerning their processes, terms and definitions, process chains (Hard- and Software), test procedures, quality parameters, supply agreements and all kind of fundamentals.
➢ Example of published ISO standards
▪ Terminology : ISO/ASTM 52900:2015
▪ Overview of process categories and feedstock : ISO 17296-2:2015
▪ Main characteristics and corresponding test methods: ISO 17296-3:2014
▪ Data exange : ISO 17296-4:2014
▪ AMF Formats : ISO/ASTM 52915:2016
▪ Coordinate systems : ISO/ASTM 52921:2013
This standards are the base for the french and European Standard
Observing Members : Austria, Brazil, Czech Republic, Islamic Republic of Iran, Israel, New Zealand, Romania, Russian Federation, South Africa, Turkey
-
ISO/TC 261/WG 1 Terminology (Sweden)Scope: Standardization of terms and definitions as well as fundamental concepts in the field of additive manufacturing
(AM*), as defined in the International Standard ISO/ASTM 52900
Intérêt et nécessité rédactionnel
-
ISO/TC 261/WG 2 Processes, Systems and Materials (Germany)
ISO/TC 261/JG 65AM Stainless Steel Alloy with Powder Bed Fusion
ISO/TC 261/JG 61Guide for intentionally
seeding flaws in additively manufactured (AM) parts
ISO/TC 261/JG 56Standard Practice for
Metal Powder Bed Fusion to Meet Rigid Quality
Requirements
ISO/TC 261/JG 66Technical specification on
metal powders
ISO/TC 261/JG 58Qualification, quality assurance and post
processing of powder bed fusion metallic parts
ISO/TC 261/JG 53Extrusion Based AMOf Plastic Materials
ISO/TC 261/JG 60 Guide for anisotropy effects in mechanical properties of AM part
This document and the information it contains are the property of VOLUM-e. They may not be copied or communicated without the prior written
consent of VOLUM-e.
Standardization in the field of additive manufacturing (AM*) processes, hardware and software, materials, including but not limited to: Material (feedstock) characteristics, production, transport, storage, treatment, re-use, Hardwarecharacteristics, qualification, operation, maintenance. Process definitions, specifications, monitoring.
-
ISO/TC 261/JG 52Standard test
artifacts
ISO/TC 261/JG 53
Purchased AM parts
ISO/TC 261/JG 59
NDT for AM parts
ISO/TC 261/JG 62
Round Robin Studies
(ASTM Lead)
ISO/TC 261/JG63Powder flow
Properties
ISO/TC 261/JG75ConformityAssesment
ISO/TC 261/JG76 Process Characteristics and performance
ISO/TC 261/WG 3 Test method and Qualityspecification (France)Standardization in the field of tests methods related to AM; including but not limited to: Characterization of samples representing AM technologies; Characterization of mechanic properties of samples build with AM (plastic, metallic and ceramic); Round robin tests, Quality requirements for parts made by AM; Characterization and description of geometries for parts build with AM; Test codes for machines in AM.
-
JG 54 Design guidelines
JG57 Specific design guidelines on powder bed fusion
JG 67 Design of functionnaly graded parts
JG 64 AMF Support for Solid Modeling
This document and the information it contains are the property of VOLUM-e. They may not be copied or communicated without the prior written
consent of VOLUM-e.
JG 70 Optimized medical image Data
JG 74 qualification of Machine Operator for metallic part production
ISO/TC 261/WG 4 Data and Design (UK)
Standardization in the field of Data and Design related to Additive Manufacturing; including but not limited to: Data processing and data exchange specifying terms, definitions, file types and relevant data formats; Additive Manufacturing Format (AMF) providing key parameters for AMF as an interchange format that uses an extensible mark-up language (XML), being capable of addressing the current and future data requirements of Additive Manufacturing technology General and specific design guidelines.
-
ISO 52941 Acceptance of
powder bed Fusion machine
ISO/TC 261/ JWG 5 Additive Manufacturingin Aerospace applications (Germany)
ISO 52942 Qualifyingmachine operator of powder bed Fusion
machine (LB)
ISO 52943 part 1 Processcharacteristics and
performance of:DED using Wire and Arc
ISO 52943 part 2 Processcharacteristics and
performance of:DED using Wire and beam
ISO 529434 Serie : Powder bed Fusion
-
ISO JG 68: EH&S for 3D Printers
ISO/TC 261/ JWG 6 Environment, healthand safety (Canada)
ISO EH&S for use of metallic materials
-
European Works European activity : CEN/TC 438 Additive Manufacturing
▪ January 2015
▪ French President (Eric Baustert – VOLUM-e) et secretariat AFNOR/UNM,
▪ Same activities field than the ISO/TC 261,
▪ Three main goals:- To provide a complete set of European standards based, as far as possible, on international standardization work. The aim is to apply the Vienna Agreement with ISO/TC 261 ‘Additive Manufacturing’ (DIN) as far as possible, to ensure consistency and harmonization;- To strengthen the link between European research programs and standardization in AM ;- To ensure visibility to the European standardization in AM : this CEN/TC will have to centralize standardization initiatives in Europe on additive manufacturing
-
20
Conclusion: Intérêt Stratégique
- Lieu d’échange stratégique pour une PME: - présence de donneurs d’ordres et de fournisseurs de premier rang: relations
extra commerciales - réseau national et international: projet collaboratif et groupe de travail
- Veille concurrentielle et technologique: tendance marché , clients, fournisseurs et institutionnels
- Harmonisation
- Investissement temps et énergies: valorisation par les pôles de compétitivité et DGE/NAE
- « Amélioration continue » et indicateurs mesurables
- Image et crédibilité, notoriété et confiance.
-
Projet Interne, Inconel 718
Injecteur, Inox 17-4ph
Suite et élargissement
Animer les activités de normalisation pour :
• Développer les sujets d’intérêt pour vos structures
• Renforcer les groupes adhoc de normalisation
• Avoir des experts français à l’international
• Impliquer des acteurs normands
Prochaines réunions
• TC ISO/ASTM : 16-20/09/19 en France (CETIM Senlis et Ariane Group MURAUX)
• UNM 920 : 05/09/2019 Maison de la mécanique Paris
• Nouvelle proposition de normes ISO de la part du Japon : • Test methods of AM sand mould for metal casting
-
Quelques chiffres
• Si êtes intéressés pour participer aux travaux de normalisation pour : – Participer aux travaux en tant qu’expert et construire les normes de
demains
– Être informé des normes en cours de publication
– Accéder aux informations de la normalisation
• N’hésitez pas à nous contacter :– Olivier Coissac [email protected]
– Eric BAUSTERT – Volum-E [email protected]
– Yoann LE SOUQUET – NAE [email protected]
mailto:[email protected]:[email protected]:[email protected]