Dissertacao_Areia de fundicao_Spent foundry sand_Barbara_Samartini_Queiroz_Alves_2012
Kupferle Foundry Catalog - September 2012
-
Upload
robert-galvin -
Category
Documents
-
view
230 -
download
3
description
Transcript of Kupferle Foundry Catalog - September 2012
September 2012
1‐800‐231‐3990
Intelligent Flushing(black section, page 4)
Automatic Flushing(red section, page 8)
Yard Hydrants(yellow section, page 40)
Sampling Stations(green section, page 32)
Manual Blow‐Offs(blue section, page 18)
Ratcheting Valve Wrench(see page 28)
1‐800‐231‐3990 • www.hydrants.com • [email protected] • 314‐231‐2829 fax
Water Main Flushing HydrantsAutomatics • Post • Blow‐Off
Bacteriological Sampling StationsDedicated Site • Meter Box • Valve Box
It was 1857, the year of the historic Dred Scott decision, when John C. Kupferle founded The Kupferle Foundry Company in St Louis, Missouri. For over 150 years, The Kupferle Foundry Company has been making quality products for the waterworks industry andbeen making quality products for the waterworks industry and continues to be the leader in innovation. Our Eclipse line of
products have been an industry standard since the 19th century and along with our MainGuard, Truflo, Total Eclipse , Corn King and new Eclipse i‐Series product lines The Kupferle Foundry
Company continues to deliver the best in quality and performance with ease of maintenance.
Manufacturer ofManufacturer of
Intelligent Flushing ‐ Automatic Flushing ‐ Sampling Stations ‐Manual Blow‐offs ‐ Yard Hydrants ‐Washdown Hydrants
Table of ContentsIntelligent Flushing
Eclipse i‐Series• Model #9700i page 4• Model #9800i page 6
Table of ContentsWater Sampling Stations
Eclipse• Model #88 page 32• Model #88‐SS page 33
d lModel #9800i page 6• Model #9800WC‐i page 7
Automatic & Continuous Flushing
Eclipse• Model #9400 page 8• Model #9400WC page 9
• Model #88WC page 34• Model #88WC‐SS page 35• Model #82 page 38
MainGuard• Model #66 page 36• Model #66WC page 37• Model #94WM page 39
Model #9400WC page 9• Model #9700 page 10• Model #9700 Accessories page 11• Model #9800 page 12• Model #9800WC page 13
MainGuard• Model #5100 page 14• Model #5200 page 15
Water Quality Stations
Eclipse• Model #9900 page 40• Model #9900WC‐2 page 41
Manual Flushing
Eclipse• Model #2 Post Hydrant page 16• Model #85 page 17• Model #8 Post Hydrant page 18R t h ti V l W h (RVW) 26
Yard Hydrants
Total Eclipse• Model #1 page 42• Model #7 page 43• Model #36 Street Washer page 44• Model #3400 Companion page 45
• Ratcheting Valve Wrench (RVW) page 26
MainGuard• Model #77 Blow‐Off page 20• Model #78 Blow‐Off page 21• Model #7500 Blow‐Off page 22• Model #7600 Blow‐Off page 23
Truflo• Model #TF500 page 27
Corn King• Model #903 page 46• Model #909 page 47
Additional Information• Kupferle Overview inside front cover
• Model #TF500 page 27• Model #TF550 page 28• Model #TF800 page 29• Model #TF200 page 30• Model #TF300 page 31
• Kupferle’s Green Initiative page 2• Water Saving Calculator page 3• Cost Saving Calculator page 5• Flushing versus Fire Hydrants page 24‐25• Flushing Flow Rate Chart page 19• Novelty Items page 48• Ordering Info/Quality Assurance inside back cover
Kupferle’s Green InitiativeKupferle s Green Initiative
Kupferle’s full line of intelligent and automatic flushing devices help the environment by conserving water (up to 50% less water usage
Automatic Flushing Helps Conserve Our Water Resources
compared to manual flushing) when flushing to raise chlorine residual levels and remove disinfectant byproducts (DBPs). Better water for consumers, less water wasted…now that’s a good thing for all of us! See the water and cost benefit calculators on pages 3 and 5 be sure to look for the EnviroGreen™ label on water‐saving Kupferle products to start saving water, time and money!
Kupferle Automatic Flushing Products
Intelligent Flushing Automatic FlushingEclipse i‐Series #9700i page 4 Eclipse #9400 page 8p p g p p gEclipse i‐Series #9800i page 6 Eclipse #9400WC page 9Eclipse i‐Series #9800WC‐I page 7 Eclipse #9700 page 10
Eclipse #9800 page 12Eclipse #9800WC page 13
Now EPA Approved!In April 2010, the EPA categorically approved portable and permanent automatic flushing devices (Attachment 2—2010 Clean Water and Drinking Water State Revolving Fund, Part B‐DWSRF 2.2‐11) for their Green Project Reserve Funding Program. Public Water Systems (PWS) can now apply for j g g y ( ) pp yfunding in the form of grants or low‐interest and long‐term loans to install automatic flushing devices in order to start saving water, time and money (see water‐saving calculator on page 3)!
The Green Project Reserve Funding Program (GPR) is designated by the EPA to promote green infrastructure by funding projects and products that provide water and energy efficiency improvements. The EPA requires that a minimum of 20% of the funds made available to each state’s Drinking Water State Revolving Fund (DWSRF) capitalization grants be used by the state for projectsDrinking Water State Revolving Fund (DWSRF) capitalization grants be used by the state for projects to address green infrastructure, water or energy efficiency improvements, or other environmentally innovative activities. For more information, go to www.hydrants.com /envirogreen
21‐800‐231‐3990 / www.hydrants.com
Kupferle’s Green InitiativeKupferle s Green Initiative
show
s og
reen
gs c
alcu
lato
r tha
t dr
ants
.com
/env
irod
this
wat
er-s
avin
ggs
go
to w
ww
.hyd
To d
ownl
oad
wat
er s
avin
g
31‐800‐231‐3990 / www.hydrants.com
I t lli t Fl hiEclipse i‐Series #9700iIntelligent Portable Automatic Hydrant Flushing Device
Intelligent Flushing
ng The Eclipse i‐Series model #9700i is one of the many
ellig
ent F
lush
in The Eclipse i Series model #9700i is one of the many new intelligent flushing devices Kupferle offers to maintain safe residual levels and remove DBPs from consumer’s water. This portable analytical device easily attaches to any fire hydrant (2½” NST) and incorporates a built‐in chlorine analyzer to measure and record disinfectant residual levels based on a programmed sampling schedule. Using the Programmable Logic
Inte p g g g g
Control (PLC) interface, users can input minimum and desired residual levels, initial blow‐off times and maximum flushing durations. The unit will then operate under these parameters and will flush only when residuals fall below minimum prescribed levels and flush only the exact amount of water until desired residuals are attained. All residual and flushing data is captured on PLC allows users to a micro‐SD card or can be transmitted via telemetry or SCADA device. Since this unit is portable, data from this unit can be used to maximize manual and/or automatic flushing efficiency.
Standard Features •2‐1/2” NST Inlet•Programmable Logic Controller (PLC)
program minimum and maximum residual levels, initial blow-off times and
maximum flushing duration.
Programmable Logic Controller (PLC) •2” Automatic Fail‐Safe Solenoid Operated Valve•Free or Combined Amperometric Chlorine Analyzer (no reagents required)•Flow Adjustment (up to 200 gpm)•Two Micro‐SD Cards and Two Standard SD Adapters•Powder‐Coated Aluminum Lockable Enclosure w/Key •120VAC or 24VDC Rating Available
Additional Options and Accessories•24VDC Power Box Option•Sampling Point Bibb•Multi‐Directional Diverter •Security Swivel Collar Lock
Approx. shipping weight 70 lbs.
See page 2
Specification sheets and additional resources are available at
www.hydrants.com/products
Approx. shipping weight 70 lbs.
1‐800‐231‐3990 / www.hydrants.com4
24VDC Power Unit Detaches Easily for Recharging
Kupferle’s Savings InitiativeKupferle s Savings Initiative
Intelligent Flushi
show
s og
reen
ng
t ca
lcul
ator
that
sdr
ants
.com
/env
irod
our c
ost-b
enef
itgs
go
to w
ww
.hyd
To d
ownl
oado
llar s
avin
g
1‐800‐231‐3990 / www.hydrants.com5
I t lli t Fl hiEclipse i‐Series #9800iIntelligent Automatic Flushing Device for Cold Climates
Intelligent Flushing
ng The Eclipse i‐Series model #9800i is one of the many new
ellig
ent F
lush
in The Eclipse i Series model #9800i is one of the many new intelligent flushing devices Kupferle offers to maintain safe residual levels and remove DBPs from consumer’s water. This permanently installed device incorporates a built‐in chlorine analyzer to measure and record disinfectant residual levels based on a programmed sampling schedule. Using the Programmable Logic Control (PLC) interface, users can input minimum and desired residual levels initial blow
Inte can input minimum and desired residual levels, initial blow‐
off times and maximum flushing durations. The unit will then operate under these parameters and will flush only when residuals fall below minimum prescribed levels and flush only the exact amount of water until desired residuals are attained. All residual and flushing data is captured on a micro‐SD card or can be transmitted via telemetry or SCADA d i Th l l h i l i i f R 9 ddevice. Thermal enclosure has a insulation rating of R‐9 and is equipped with 120VAC heater. Sampling lines are heated using self‐regulating heat trace. Unit is self‐draining, non‐freezing based on depth of bury and is maintainable from above ground – no digging!
R-9 thermal enclosure
Flushing valve and drain located below freeze line
Standard Features •3’ Depth of Bury•Programmable Logic Controller (PLC) •2” Automatic Fail‐Safe Solenoid Operated Valve•Free or Combined Amperometric Chlorine Analyzer (no reagents required)
•Flow Adjustment (up to 200 gpm)
PLC allows users to program minimum and
maximum residual levels, initial blow-off times and
maximum flushing duration.
•Two Micro‐SD Cards and Two Standard SD Adapters•SCADA Compatible•120VAC High Performance Heater with Fan •Self‐Regulating Heat Trace•R‐9 Rated Lockable Thermal Enclosure •120VAC rating
Additional Options and AccessoriesSee page 2 Additional Options and Accessories•Depths of Bury over 3’•Dechlorination Tablet Basket or Inline Option •Low‐Lead Brass
Approx. shipping weight 70 lbs.
See page 2
1‐800‐231‐3990 / www.hydrants.com
Specification sheets and additional resources are available at
www.hydrants.com/products
6
I t lli t Fl hiEclipse i‐Series #9800WCiIntelligent Automatic Flushing Device for Warm Climates
Intelligent Flushing
In
The Eclipse i‐Series model #9800i is one of the many new telligent Flushi
The Eclipse i Series model #9800i is one of the many new intelligent flushing devices Kupferle offers to maintain safe residual levels and remove DBPs from consumer’s water. This permanently installed device incorporates a built‐in chlorine analyzer to measure and record disinfectant residual levels based on a programmed sampling schedule. Using the Programmable Logic Control (PLC) interface, users can input minimum and desired residual levels initial blow ngcan input minimum and desired residual levels, initial blow‐off times and maximum flushing durations. The unit will then operate under these parameters and will flush only when residuals fall below minimum prescribed levels and flush only the exact amount of water until desired residuals are attained. All residual and flushing data is captured on a micro‐SD card or can be transmitted via telemetry or SCADA d i Th i i h d i UV i l k bl
Standard Features •1’ Depth of Bury•Programmable Logic Controller (PLC)
device. The unit is housed in a UV‐resistant lockable enclosure. Lockable
UV-Resistant Enclosure
Programmable Logic Controller (PLC) •2” Automatic Fail‐Safe Solenoid Operated Valve•Free or Combined Amperometric Chlorine Analyzer (no reagents required)•Flow Adjustment (up to 200 gpm)•Two Micro‐SD Cards and Two Standard SD Adapters•120VAC or 24VDC rating available
PLC allows users to program minimum and
maximum residual levels, initial blow-off times and
maximum flushing duration.
Additional Options and Accessories•Depths of Bury over 3’•24VDC Solar Power Package•Dechlorination Tablet Basket or Inline Option •Low‐Lead Brass
Approx. shipping weight 70 lbs.
1‐800‐231‐3990 / www.hydrants.com
Specification sheets and additional resources are available at
www.hydrants.com/products
7
See page 2
A t ti & C ti Fl hiEclipse #9400Permanent Automatic Flushing Device for All Climates
Automatic & Continuous Flushing
The Eclipse #9400 Automatic Flushing device is designed andThe Eclipse #9400 Automatic Flushing device is designed and engineered specifically for automatic flushing in all climates. The permanently installed #9400 provides excellent flow rates of up to 200 gallons per minute to improve and maintain chlorine residual levels and flush disinfectant byproducts (DBPs) so as to keep water safe for consumers. The #9400 can be easily installed on a main waterline and flushes directly to the ground A 1” option isuo
us F
lush
ing
waterline and flushes directly to the ground. A 1 option is also available with flow rates up to 65 gallons per minute.
The Eclipse #9400 comes standard with a UV resistant locking cover. Each unit contains a double valve, all brass sampling point, UV resistant ground plate, solenoid valve and self contained digital controller. The #9400 allows for 12 flushing cycles per day at up to 6 hours of flush time per m
atic
& C
ontin
cycle. Operates on one 9‐Volt battery (compartment holds two batteries). The Eclipse #9400 is self‐draining, non‐freezing and is fully serviceable from above ground – no digging required!
Standard Features
Aut
o
•3’ Bury•2” FIP Inlet•Self Draining, Non‐Freezing•2”Automatic Valve, Controller, Battery•Above‐Grade Flow Adjustment•UV Resistant Cover and Base
Additional Options
Easy‐to‐program Digital Controller
Additional Options•Any Depths of Bury Over 3’•Optional 1” Model #9400‐A •Dechlorination Tablet Basket•2” Debris Flushing Pipe•1” Debris Flushing Pipe•Low‐Lead Brass
See Page 21” Model = Approx. shipping weight 55 lbs. for 3ft. Bury2” Model = Approx. shipping weight 65 lbs. for 3ft. Bury
Spec sheets, installation details and additional resources are available at
www.hydrants.com/products
g
2” Debris Flushing Pipe
81‐800‐231‐3990 / www.hydrants.com
A t ti & C ti Fl hiEclipse #9400WC Permanent Automatic Flushing Device for Warm Climates
Automatic & Continuous Flushing
The Eclipse #9400WC Automatic Flushing device is designedThe Eclipse #9400WC Automatic Flushing device is designed and engineered specifically for automatic flushing in warm climates. The permanently installed #9400WC provides excellent flow rates of up to 200 gallons per minute to improve and maintain chlorine residual levels and flush disinfectant byproducts (DBPs) so as to keep water safe for consumers. The #9400WC can be easily installed on a main waterline and flushes directly to the ground A 1” option is
Autom
atic & C
waterline and flushes directly to the ground. A 1 option is also available with flow rates up to 65 gallons per minute.
The Eclipse #9400WC comes standard with a UV resistant locking cover. Each unit contains a double valve, all brass sampling point, UV resistant ground plate, solenoid valve and self contained digital controller. The #9400WC allows for 12 flushing cycles per day at up to 6 hours of flush time per
ontinuous Flus
cycle. Operates on one 9‐Volt battery (compartment holds two batteries). The Eclipse #9400WC is fully serviceable from above ground – no digging required!
Standard Features •1’ Bury•2” MIP Inlet
hing
•Non‐Draining•2” Automatic Valve, Controller, Battery•Above‐Grade Flow Adjustment•UV Resistant Cover and Base
Additional Options•Optional 1” Model #9400WC‐A•Dechlorination Option
Easy‐to‐program Digital Controller
•Dechlorination Option
1” Model = Approx. shipping weight 55 lbs. for 1 ft. Bury2” Model = Approx. shipping weight 65 lbs. for 1 ft. Bury
Spec sheets, installation details and additional resources are available at
www.hydrants.com/products
See Page 2
91‐800‐231‐3990 / www.hydrants.com
A t ti & C ti Fl hiAutomatic & Continuous Flushing
The Eclipse #9700 Portable Automatic Flushing device is
Eclipse #9700 Portable Automatic Hydrant Flushing Device
designed and engineered specifically for automatic flushing in all climates. The portable #9700 easily attaches to any 2½” NST outlet and provides excellent flow rates of up to 200 gallons per minute to improve and maintain chlorine residual levels and flush disinfectant byproducts (DBPs) so as to keep water safe for consumers. The #9700 can be easily installed onto any 2½ NST fire hydrant or flushing blow‐off outlet, uo
us F
lush
ing
flushing water directly to the ground. A 1” option is also available with flow rates up to 65 gallons per minute.
The Eclipse #9700 comes standard with a powder‐coated aluminum locking enclosure. Each unit includes a solenoid valve and self contained digital controller. The #9700 allows for 12 flushing cycles per day at up to 6 hours of flush time per cycle. Operates on one 9‐Volt battery (compartment m
atic
& C
ontin
pe cyc e Ope ates o o e 9 o t batte y (co pa t e tholds two batteries). The Eclipse #9700 is designed to operate during non‐freezing seasons and is easily stored in the winter. Collar lock, directional diverter and other optional accessories are available (see page 11).
Standard Features •2‐1/2” NST Inlet
See Page 21” Model #9700‐A
Aut
o
•2” Automatic Valve, Controller, Battery•Powder‐Coated Aluminum Lockable Box
Additional Options and Accessories•Multi‐Directional Diverter •Sampling Point Bibb•Collar Lock (red or yellow)•Dechlorination Tablet Basket
Easy‐to‐program Digital Controller
•Dechlorination Tablet Basket•Meter Stand•1” Model #9700‐A • Special Threads Available
1” Model = Approx. shipping weight 15 lbs.2” Model = Approx. shipping weight 25 lbs.
Spec sheets, installation details and additional resources are available at
www.hydrants.com/products
101‐800‐231‐3990 / www.hydrants.com
A t ti & C ti Fl hiEclipse #9700 Accessories Accessories for your #9700 Flushing Unit
Automatic & Continuous Flushing
Kupferle Foundry offers several accessories to go with its best‐selling Eclipse #9700 and #9700‐A portable automatic flushing devices. From multi‐directional diffusers, meter stands, dechlorination option sampling bibbs to
Autom
atic & C
Multi‐Directional Diverter
dechlorination option, sampling bibbs to security collar locks. Kupferle provides numerous quality accessories to choose from!
ontinuous Flus
Water Meter Stand
hing
Dechlorination BasketSampling Bibb
Security Collar Lock
Serving the Waterworks Industry for over 150 years!
111‐800‐231‐3990 / www.hydrants.com
A t ti & C ti Fl hiEclipse #9800 Permanent Automatic Flushing device for All Climates
Automatic & Continuous Flushing
The Eclipse #9800 Automatic Flushing device isThe Eclipse #9800 Automatic Flushing device is designed and engineered specifically for automatic flushing in all climates. The permanently installed #9800 provides excellent flow rates of up to 200 gallons per minute to improve and maintain chlorine residual levels and flush disinfectant byproducts (DBPs), so as to keep water safe for consumers The #9800 can be easily installed on auo
us F
lush
ing
consumers. The #9800 can be easily installed on a main waterline and flushes underground directly to a sanitary sewer, storm sewer or culvert. A 1” option is also available with flow rates up to 65 gallons per minute.
The Eclipse #9800 comes standard with a UV‐resistant locking cover. Each unit contains a double m
atic
& C
ontin
Lockable UV Resistant
valve, all brass sampling point, solenoid valve and self contained digital controller. The #9800 allows for 12 flushing cycles per day at up to 6 hours of flush time per cycle. Operates on one 9‐Volt battery (compartment holds two batteries). The Eclipse #9800 is self‐draining, non‐freezing and is fully serviceable from above ground – no digging
Standard Features•3’ Bury•2” FIP Inlet
Aut
o
Easy‐to‐program Digital Controller
UV-Resistant Enclosure
g gg grequired! •Self Draining, Non‐Freezing
•2”Automatic Valve, Controller, Battery•Above Grade Flow Adjustment•UV Resistant Lockable Cover and Key
Additional Options and Accessories•Any depths of Bury over 3’• 1” Model #9800‐A1 Model #9800 A• Dechlorination Tablet Basket• 2” Debris Flushing Pipe • 1” Debris Flushing Pipe•Additional keys
1” Model = Approx. shipping weight 55 lbs. for 3ft. Bury
See Page 2
2” Debris Flushing Pipe
2” Model = Approx. shipping weight 65 lbs. for 3ft. Bury
Spec sheets, installation details and additional resources are available at
www.hydrants.com/products
121‐800‐231‐3990 / www.hydrants.com
A t ti & C ti Fl hiEclipse #9800WC Permanent Automatic Flushing device for Warm Climates
Automatic & Continuous Flushing
The Eclipse #9800WC Automatic Flushing device isThe Eclipse #9800WC Automatic Flushing device is designed and engineered specifically for automatic flushing in warm climates. The permanently installed #9800WC provides excellent flow rates of up to 200 gallons per minute to improve and maintain chlorine residual levels and flush disinfectant byproducts (DBPs) so as to keep water safe for consumers The #9800WC can be easily
Autom
atic & C
safe for consumers. The #9800WC can be easily installed on a main waterline and flushes underground directly to a sanitary sewer, storm sewer or culvert. A 1” option is also available with flow rates up to 65 gallons per minute.
The Eclipse #9800WC comes standard with a UV‐resistant locking cover. Each unit contains a double
ontinuous Flus
valve, all brass sampling point, solenoid valve and self contained digital controller. The #9800WC allows for 12 flushing cycles per day at up to 6 hours of flush time per cycle. Operates on one 9‐Volt battery (compartment holds two batteries). The Eclipse #9800WC is fully serviceable from above ground – no digging required!
hing
Easy‐to‐program Digital Controller
Lockable UV-Resistant
Enclosure
g gg g qStandard Features •1’ Bury•2” MIP Inlet•Non ‐ Draining •2” Automatic Valve, Controller, Battery•Above Grade Flow Adjustment•UV Resistant Lockable Cover and Key
Additional Options and Accessories•1” Model #9800WC‐A•Dechlorination Tablet Basket•Spare Key, #9812
Approx. shipping weight 65 lbs. for 1 ft. Bury
See Page 2
Spec sheets, installation details and additional resources are available at
www.hydrants.com/products
131‐800‐231‐3990 / www.hydrants.com
A t ti & C ti Fl hiMainGuard #5100Permanent Continuous Flusher for All Climates (in ground)
Automatic & Continuous Flushing
The MainGuard #5100 Continuous Flushing deviceThe MainGuard #5100 Continuous Flushing device provides a continuous flow of water on stagnant dead ends! The #5100 is permanently installed on a water main line and provides an adjustable constant flow to keep chlorine residual levels in water safe and prevent the formation of disinfectant byproducts (DBPs).
The MainGuard #5100 comes standard with a 3/8” l h d d i l i ll b
uous
Flu
shin
g
male threaded inlet connection, all brass waterway, orifice to control flow of water and provide constant flow, catch basin to discharge water underground, and a lockable UV protected plastic cover. The standard #5100 maintains a constant flow of .1 to 6 GPM. As with all Kupferle products, the Eclipse #5100 is fully serviceable from above ground – no digging!m
atic
& C
ontin
Aut
o
Standard Features•Buries Direct in Ground with no Flange•Water Inlet Enters from Underneath FlusherWater Inlet Enters from Underneath Flusher•3’ Below Grade Piping Standard
Approx. shipping weight 25 lbs.
Spec sheets, installation details and additional resources are available at
www.hydrants.com/products
141‐800‐231‐3990 / www.hydrants.com
A t ti & C ti Fl hiMainGuard #5200Portable Continuous Flusher for All Climates (bolts to meter box lid)
Automatic & Continuous Flushing
The MainGuard #5200 Continuous Flushing device Autom
atic & C
The MainGuard #5200 Continuous Flushing device provides a continuous flow of water on stagnant dead ends! The #5200 is temporarily installed by bolting to a meter box lid and provides an adjustable constant flow to keep chlorine residual levels in water safe and prevent the formation of disinfectant byproducts (DBPs).
Th M i G d #5200 d d i h 3/8”
ontinuous Flus
The MainGuard #5200 comes standard with a 3/8” male threaded inlet connection, all brass waterway, orifice to control flow of water and provide constant flow, catch basin to discharge water underground and a lockable UV protected plastic cover. The standard #5200 maintains a constant flow of .1 to 6 GPM. As with all Kupferle products, the Eclipse #5200 is fully hing
serviceable from above ground – no digging!
Standard Features •Furnished with Four‐Bolt Flange 6” High•Water Connection Enters From Underneath Flusher•Discharge Pipe Exits HORIZONTALLY through Pedestal
Flange has four 1/2” bolt holes at
5‐9/16” centers
Approx shipping weight 25 lbs.
Spec sheets, installation details and additional resources are available at
www.hydrants.com/products
151‐800‐231‐3990 / www.hydrants.com
M l Fl hiEclipse #2 Post Flushing HydrantPermanent Flushing Hydrant for all Climates
Manual Flushing
The Eclipse #2 Post Hydrant is one of the best selling flushing hydrants for water main dead ends. Designed for performance and durability, the Eclipse #2 provides excellent flow rates for improving chlorine residual levels and flushing disinfection byproducts (DBPs) to keep water safe for consumers.
The Eclipse #2 comes standard with all brass working parts, nozzle sizes up to 2½” NST, self draining, non‐parts, nozzle sizes up to 2½ NST, self draining, nonfreezing, 3’ bury or less, 2‐3/16” valve opening and 1½” pentagon operating nut. Various inlets available (see below). The Eclipse #2 is fully serviceable from above ground – no digging!
* See flushing flow rate chart on page 19
Flus
hing
Man
ual F
Standard Features•3’ Bury or Less•Any size nozzle up to 2‐1/2” NST
Inlet Options include 2”, 2½”, 3” FIP or 2” 3” 4”Any size nozzle up to 2 1/2 NST
•2‐3/16” Valve Opening •Self Draining, Non‐Freezing•1‐1/2” Pentagon Nut
Additional Options and Accessories•Any Depths of Bury over 3’•2” , 2‐1/2” or 3” FIP Inlet Eclipse #2A
1¼” 1½”
3 FIP or 2 , 3 , 4 MJ
•2”, 3” or 4” MJ Inlet•Two Nozzles of any size up to 2‐1/2” NST•Tamper‐Proof Option•Bolted Flange Top‐Stock•10” Hand Wheel•Multiple Wrenches•Call for Additional Custom Options
1¼” or 1½”also available
Approx. shipping weight 130 lbs. for 3ft. Bury
Spec sheets, installation details and additional resources are available at
www.hydrants.com/products
161‐800‐231‐3990 / www.hydrants.com
M l Fl hiEclipse #85 Blow‐Off HydrantPermanent Flushing Hydrant for All Climates
Manual Flushing
The Eclipse #85 Blow‐Off Hydrant is designed and engineered specifically for flushing and provides excellent flow rates for improving chlorine residual levels and flushing disinfection byproducts (DBPs) to keep water safe for consumers. The #85 Eclipse Blow‐Off Hydrant is designed with a heavy wall cast‐iron box. The box sits at ground level and is not traffic rated.
The Eclipse #85 comes standard with all brass working parts, numerous outlet sizes 2½” NST or smaller, self draining non‐freezing drain, and numerous inlet sizes also available. The Eclipse #85 is fully serviceable from above ground – no digging!
Manual F
Wrench Sold Separately
* See flushing flow rate chart on page 19
Flushing
Standard Features•3’ Bury or Less•Any Size Nozzle up to 2‐1/2” NSTAny Size Nozzle up to 2 1/2 NST•2‐3/16” Valve Opening•Self Draining, Non‐Freezing•Cast‐Iron Box with Locking Lid
Additional Options and Accessories•Any Depths of Bury over 3’•1‐1/4”, 1‐1/2”, 2”, 2‐1/2”, 3” IP Inlet•2”, 3” or 4” MJ Inlet•Nozzle Cap•Long and Short Handle Wrenches
Approx. shipping weight 100 lbs. for 3ft. Bury
Inlet Options include 2”, 2½”, 3” FIP or 2”, 3”, 4”
MJ
Spec sheets, installation details and additional resources are available at
www.hydrants.com/products
171‐800‐231‐3990 / www.hydrants.com
M l Fl hiEclipse #8 Post Flushing HydrantPermanent Flushing Hydrant for all Climates
Manual Flushing
The new Eclipse #8 Post Hydrant is designed to deliver performance and durability for flushing water main dead‐ends at a value price. The Eclipse #8 provides excellent flow rates for improving chlorine residual levels and flushing disinfection byproducts (DBPs) to keep water safe for consumers.
The Eclipse #8 comes standard with all brass working parts, nozzle size up to 2½” NST, self draining, non‐parts, nozzle size up to 2½ NST, self draining, nonfreezing, 3’ bury or less, 2‐3/16” valve opening and 1½” pentagon operating nut. Various inlets available. As with all Kupferle products, the Eclipse #8 is fully serviceable from above ground – no digging!
Flus
hing
Man
ual F
Standard Features•3’ Bury or Less•Any size nozzle up to 2‐1/2” NSTAny size nozzle up to 2 1/2 NST•2‐3/16” Valve Opening •Self Draining, Non‐Freezing•1‐1/2” Pentagon Nut
Additional Options and Accessories•Any Depths of Bury over 3’•2” , 2‐1/2” or 3” FIP Inlet•2”, 3” or 4” MJ Inlet•Tamper‐Proof Option•Bolted Flange Top‐Stock•10” Hand Wheel•Multiple Wrenches•Call for Additional Custom Options
Approx. shipping weight 130 lbs. for 3ft. Bury
Inlet Options include 2”, 2½”, 3” FIP or 2”, 3”, 4”
MJApprox. shipping weight 130 lbs. for 3ft. Bury
Spec sheets, installation details and additional resources are available at
www.hydrants.com/products
181‐800‐231‐3990 / www.hydrants.com
K f l M l Fl hi G id liKupferle Manual Flushing Guidelines
s nfectant guide
lines
e/Ch
loramines
m: 0.5mg/L
m: 4.0 m
g/L
)EPA disin
Chlorine
Minim
umMaxim
um
Manual F
g Ve
locity (5.0 fps)
pm pm pm 0 gpm
Flushing
Ideal Scouring
4” = 195
.72 gp
6” = 440
.40 gp
8” = 782
.90 gp
10” = 12
23.30
t. of p
ipe eq
uals:
2.42
gallons
468.00
gallons
609.70
gallons
,078
.00 gallons
eet =
1 m
ile
1000
ft4” = 65
6” = 1,4
8” = 2,6
10” = 4
5,28
0 fe
191‐800‐231‐3990 / www.hydrants.com
M l Fl hiMainGuard #77 Post Flushing HydrantPermanent Flushing Hydrant for All Climates
Manual Flushing
The MainGuard #77 Blow‐Off provides the best in performance and value. Designed and engineered specifically for flushing, the #77 provides excellent flow rates for improving chlorine residual levels and flushing disinfection byproducts (DBPs) to keep water safe for consumers. The unique valve design allows for a full clear‐channel flow (see illustrations) that is superior to other blow‐offs for moving water and p gpassing debris easily. The #77 plunger is also designed to allow for throttling the flow of water while at the same time covering the drain hole to avoid unnecessary erosion.
The MainGuard #77 comes standard with all brass and aluminum working parts, nozzle sizes up to 2 ½” NST, traffic break away self draining non freezing 2” FIPFl
ushi
ng
traffic break‐away, self draining non‐freezing, 2 FIP vertical (straight) inlet and locking security cover standard. The MainGuard #77 is fully serviceable from above ground – no digging!
* See flushing flow rate chart on page 19
Man
ual F
Standard Features•3’ Bury or Less•2” FIP Vertical (straight) Inlet•2‐1/2” NST Nozzle (or any size smaller)•Self Draining, Non‐Freezing•All Brass and Aluminum Working Parts•Traffic Break‐Away•Locking Security CoverLocking Security Cover•Slotted Corp Style Operating Nut
Additional Options and Accessories•Any Depths of Bury over 3’•90° Horizontal (side) Inlet•2” MJ Inlet Iron with Epoxy Coating•2” MJ Inlet all Brass ValveO i h
Unique Valve Design Allows for Full“Clear Channel” Flow and Passing of•Operating Wrench
•Low‐Lead Brass
Approx. shipping weight 60 lbs. for 3ft. Bury
Clear Channel Flow and Passing ofLarge Debris (see flow rates on page 19)
Spec sheets, installation details and additional resources are available at
www.hydrants.com/products
201‐800‐231‐3990 / www.hydrants.com
M l Fl hiManual Flushing
The MainGuard #78 Blow‐Off installs underground in a
MainGuard #78 Blow Off HydrantPermanent Flushing Hydrant for All Climates
The MainGuard #78 Blow Off installs underground in a standard meter box. Designed and engineered specifically for flushing, the #78 provides excellent flow rates for improving chlorine residual levels and flushing disinfection byproducts (DBPs) to keep water safe for consumers. Its unique valve design allows for a full clear‐channel flow (see illustrations) that is superior to other blow offs for moving water and passing debris
Manual
other blow‐offs for moving water and passing debris easily. The #78 plunger is also designed to allow for throttling the flow of water while at the same time covering the drain hole to avoid unnecessary erosion.
The MainGuard #78 comes standard with all brass and aluminum working parts, nozzle sizes 2 ½” NST or smaller, traffic break‐away, self draining non‐freezing, Flushing
2” FIP vertical (straight) inlet and locking security cover standard. The MainGuard #78 is fully serviceable from above ground – no digging!
* See flushing flow rate chart on page 19
Standard Features•3’ Bury or Less•2” FIP Vertical (straight) Inlet•2‐1/2” NST Nozzle (or any size smaller)•All Brass and Aluminum Working Parts•Self Draining, Non‐Freezing•Installs Underground in Meter Box•Locking Security Cover•Locking Security Cover•Slotted Corp Style Operating Nut
Additional Options and Accessories•Any Depths of Bury over 3’•90º Horizontal (side) Inlet•2” MJ Inlet Iron with Epoxy Coating•2” MJ Inlet all Brass Valve
Unique Valve Design Allows for Full“Clear Channel” flow and Passing of
Approx. shipping weight 37 lbs.
Large Debris (see Flow rates on page 19)
Spec sheets, installation details and additional resources are available at
www.hydrants.com/products
211‐800‐231‐3990 / www.hydrants.com
M l Fl hiMainGuard #7500 Post Flushing HydrantPermanent Flushing Hydrant for All Climates
Manual Flushing
The MainGuard #7500 Blow‐Off Hydrant is designed and engineered specifically for flushing large amounts of water quickly. The unit provides excellent flow rates comparable to a standard fire hydrant. The MainGuard #7500 Blow‐Off Hydrant accommodates a high flow volume for bio‐film scouring applications and the unique valve design allows for flushing of large debris. The unit provides ample flushing velocities p p gusually at half the cost of a fire hydrant.
The MainGuard #7500 comes standard with all brass and aluminum working parts, 4” inlet and outlet and is self draining and non‐freezing. The MainGuard #7500 is fully serviceable from above ground – no digging!
Flus
hing
* See flushing flow rate chart on page 19
Man
ual F
Standard FeaturesStandard Features•3’ Bury•4” MJ Inlet•4” FIP Outlet with Plug•Self Draining, Non ‐Freezing
Additional Options and Accessories•Any Depths of Bury over 3’•6” MJ Inlet•Locking Cap Feature
Approx. shipping weight 100 lbs. for 3ft. Bury Unique Valve Design Allows for Full“Clear Channel” Flow and Passing of
Large Debris (see flow rates on page 19)Large Debris (see flow rates on page 19)
Spec sheets, installation details and additional resources are available at
www.hydrants.com/products
221‐800‐231‐3990 / www.hydrants.com
M l Fl hiManual Flushing
The MainGuard #7600 Blow‐Off Hydrant installs
MainGuard #7600 Blow Off HydrantPermanent Flushing Hydrant for All Climates
underground in a meter box and is designed and engineered specifically for flushing large amounts of water quickly. The unit provides excellent flow rates comparable to a standard fire hydrant. The MainGuard #7600 Blow‐Off Hydrant accommodates a high flow volume for bio‐film scouring applications and its unique valve design allows for flushing of large debris. The unit
Manual
g g gprovides ample flushing velocities usually at half the cost of a fire hydrant.
The MainGuard #7600 comes standard with all brass and aluminum working parts, 4” inlet and outlet and is self draining and non‐freezing. The MainGuard #7600 is fully serviceable from above ground – no digging!
Flushing
* See flushing flow rate chart on page 19
Standard Features•3’ Bury•4” MJ Inlet•4” FIP Outlet with Plug•Self Draining, Non–Freezing
Additional Options and Accessories•Any Bury Depths over 3’
Unique Valve Design Allows for Full“Clear Channel” Flow and Passing of
•Any Bury Depths over 3 •6”MJ Inlet•Locking Feature•Lid for 12” Sewer Pipe
Approx. shipping weight 90lbs.
Large Debris (see Flow rates on page 19)
Spec sheets, installation details and additional resources are available at
www.hydrants.com/products
231‐800‐231‐3990 / www.hydrants.com
Fl hi H d t Fi H d tFlushing Hydrants versus Fire HydrantsKupferle offers a better solution to placing expensive fire hydrants on water main dead ends. The MainGuard #7500 and #7600 provides comparable flow rates for flushing and scouring, but usually at g g, yabout half the cost of a fire hydrant. Fire hydrants provide fire protection for 250 feet on either side of the unit, but when placed on dead ends the downstream area of protection is wasted (see illustration below). Additionally, fire departments prefer NOT to have fire hydrants placed at the end of a cul‐de‐sac and residents will enjoy having no above
Flus
hing
cul de sac, and residents will enjoy having no above ground installations or parking issues on their property (MainGuard #7600 below grade fits inside a meter box).
The MainGuard #7500 and #7600 are specifically engineered for flushing with a unique valve design that allows larger debris to pass versus a fire hydrant. See h b fi l l 27 h
MainGuard #7500 MainGuard #7600
Man
ual F the cost benefit calculator on page 27 to see how
much you can save using Kupferle’s MainGuard #7500 and #7600 flushing hydrants!
PLAN 1: 1500 foot water main with fire hydrant at dead‐end
PLAN 2: 1250 foot water main with flushing hydrant at dead‐end = $$$ savedPLAN 2: 1250 foot water main with flushing hydrant at dead‐end = $$$ saved
Flushing Hydrant
250
241‐800‐231‐3990 / www.hydrants.com
Fl hi H d t Fi H d tFlushing Hydrants versus Fire Hydrants
Manual sh
ows
ogre
en
Flushing
t ca
lcul
ator
that
sdr
ants
.com
/env
irod
our c
ost-b
enef
itgs
go
to w
ww
.hyd
To d
ownl
oado
llar s
avin
g
251‐800‐231‐3990 / www.hydrants.com
M l Fl hiManual Flushing
The Eclipse RVW is specifically designed to make operating valves easier! With its dual ratcheting feature
Eclipse Ratcheting Valve Wrench (RVW)Ratcheting Valve Wrench with Swivel Action Socket
operating valves easier! With its dual ratcheting feature and swivel action socket, the Eclipse RVW eliminates the need to turn the operating handle 360º. The Eclipse RVW can be made with a solid or telescoping shaft at various lengths up to 20 feet.
The Speedy Valve Wrench (SVW) can be made as a stand alone wrench or as an attachment to the RVW.
NEW
Flus
hing
With its non‐stationary rotating handle for smooth, quick turning the SVW is designed to open valves quickly and easily.
Standard Features – RVW•Solid Shaft Available
Independently tested up to 777 ft‐lbs. of torque!
Man
ual F
•Solid Shaft Available•Telescoping Shaft Available•Dual Ratcheting Action•Ductile Gear and Pawl•Swivel Action Socket
Additional Options and Accessories•Solid Socket•Custom Lengths Upon Request• Auger (for valve box cleanout)•Attachable 1¼” Pentagon Key•Attachable 1½” Pentagon Key•Attachable 1” Square Key•Attachable 1½” Square Key•Attachable 2” Square Key
NEW
Speedy Valve
Approx. shipping weight 10 lbs. for 6 ft. telescoping model
Wrench (SVW)
Attachable Swivel Handle
Attachable Pent and
Square Keys
Attachable Auger for Valve Box Clean Out
261‐800‐231‐3990 / www.hydrants.com
M l Fl hiManual Flushing
The Truflo #TF500 Blow‐Off is designed and engineered
Truflo #TF500 Blow Off (fits inside a 5¼” valve box)
Permanent Flushing for All Climates
The Truflo #TF500 Blow Off is designed and engineered with a slim profile that fits into a standard 5¼” adjustable valve box. The #TF500 provides an alternative to a gate valve, 2” blow‐off assembly with two valve boxes and is built for frequent exercising and longevity with minimal maintenance. The #TF500 is cast iron, steel, and brass construction with all brass and aluminumworking parts An all brass option (see photo
Manual
aluminum working parts . An all brass option (see photo to the right) is also available.
The Truflo #TF500 comes standard with a 2” MIP outlet, 2” FIP vertical straight inlet. Horizontal inlet and low‐lead brass options are also available. The Truflo #TF500 is fully serviceable from above ground – no digging!
Flushing
* See flushing flow rate chart on page 19
Standard Features•3’ Bury or Less•2” MIP Outlet2 MIP Outlet•2” Vertical (straight) Inlet•9/16” Square Operating Nut•Cast Iron Headstock•Fits Inside 5‐1/4” Valve Box•Self Draining, Non‐Freezing
Additional Options and Accessories
When Plunger is Raised, Water Flows Around
Plunger Housing All i f F ll •Any Bury Depths Over 3’
•2” MJ Inlet Iron Adapter•2” MJ Inlet Brass Adapter•Horizontal Side Inlet•All Brass and Aluminum Model•Epoxy Coated Cast Iron•24” Riser•36” Operating Wrench
Allowing for a Full Dual‐Channel Flow
36 Operating Wrench•Low‐Lead Brass
Approx. shipping weight 35lbs. for 3ft. BurySpec sheets, installation details and additional resources are available at
www.hydrants.com/products
271‐800‐231‐3990 / www.hydrants.com
M l Fl hiTruflo #TF550 Blow‐Off (fits inside a 5¼” valve box)
Permanent Flushing for Warm Climates
Manual Flushing
The Truflo #TF550 Blow‐Off is designed and engineered with a slim profile that fits into a standard 5¼” adjustable valve box. The #TF550 provides an alternative to a gate valve, 2” blow‐off assembly with two valve boxes and is built for frequent exercising and longevity with minimal maintenance. The #TF550 is all brass construction with all brass working parts .
The Truflo #TF550 comes standard with a 2” MIPThe Truflo #TF550 comes standard with a 2 MIP outlet, 2” FIP vertical straight inlet. A low‐lead brass option is also available. The Truflo #TF550 is fully serviceable from above ground – no digging!
Flus
hing
Man
ual F Standard Features
•2” FIP Inlet•2” MIP Outlet•Non‐Draining•9/16” Square Operating Nut•All Brass Design
Additional Options and Accessories•Epoxy Coated Cast‐Iron•24” Riser •36” Operating Wrench•Low‐Lead Brass
Approx. shipping weight 15 lbs.Approx. shipping weight 15 lbs.
Spec sheets, installation details and additional resources are available at
www.hydrants.com/products
281‐800‐231‐3990 / www.hydrants.com
M l Fl hiManual Flushing
The Truflo #TF800 Blow‐Off fits into a standard meter
Truflo #TF800 Blow Off Permanent Flushing for Warm Climates
The Truflo #TF800 Blow Off fits into a standard meter box and provides an alternative to a gate valve, 4” blow‐off assembly. It features all brass construction and working parts.
The Truflo #TF800 comes standard with a 4” MIP outlet, 4” FIP vertical straight inlet. A Low‐lead brass option is also available. The Truflo #TF800 is fully serviceable f b d di i !
Manual
from above ground – no digging!
Flushing
Standard Features•4” FIP Inlet•4” MIP Outlet4 MIP Outlet•Non –Draining•All Brass Design•Operates with Corp. Wrench
Additional Options and Accessories•Low‐Lead Brass
Approx. shipping weight 35lbs. for 3ft. Bury
Spec sheets, installation details and additional resources are available at
www.hydrants.com/products
291‐800‐231‐3990 / www.hydrants.com
M l Fl hiTruflo #TF200 Blow‐OffPermanent Flushing for All Climates
Manual Flushing
The Truflo #TF200 Blow‐Off is an excellent choice for performance and value. Designed and engineered specifically for flushing, the Truflo TF#200 provides excellent flow rates for improving chlorine residual levels and flushing disinfection byproducts (DBPs) to keep water safe for consumers. The unique valve design allows for a dual‐channel flow (see illustrations) that is superior to other blow‐offs for moving water p gand passing debris easily. The Truflo TF#200 plunger is engineered to cover the drain hole while flushing to avoid unnecessary ground erosion.
The Truflo TF#200 comes standard with all brass and aluminum working parts, outlet nozzle sizes up to 2 ½” NST, 2” vertical inlet (horizontal option available and is self draining non freezing) The Truflo TF#200 is fullyFl
ushi
ng
self‐draining, non‐freezing). The Truflo TF#200 is fully serviceable from above ground – no digging!
* See flushing flow rate chart on page 19Man
ual F
Standard Features•3’ Bury or Less
When Plunger is Raised, Water Fl A d•2” FIP Inlet
•2½” NST Outlet•Self‐Draining, Non‐Freezing•9/16” Square Operating Nut
Additional Options and Accessories•Any Depths of Bury over 3’•Any Outlet up to 2½” NST
Flows Around Plunger Housing Allowing for a Full Dual‐Channel Flow
Any Outlet up to 2½ NST•Anti‐Vandal Cap•Breakaway Traffic Flange•90° Horizontal (side) Inlet•Operating Wrench•Operating Handle•2” MJ Inlet Iron Adapter•2” MJ Inlet Brass Adapter
Truflo #TF250 is a below grade option
for the Truflo #TF200 and fits
inside a meter box
•Low‐Lead Brass
Approx. shipping weight 60 lbs.Spec sheets, installation details and additional resources are available at
www.hydrants.com/products
301‐800‐231‐3990 / www.hydrants.com
M l Fl hiManual Flushing
The Truflo #TF300 Blow‐Off is an excellent choice for
Truflo #TF300 Post Hydrant Permanent Washdown for All Climates
The Truflo #TF300 Blow Off is an excellent choice for washdown and general use applications on waterlines, water treatment or waste water treatment plants. Designed for washdown, the Truflo TF#300 provides excellent flow rates. The unique valve design allows for a dual‐channel flow (see illustrations) that is superior to other hydrants for moving water at high velocities. The Truflo TF#300 plunger is engineered to cover the drain hole
Manual
Truflo TF#300 plunger is engineered to cover the drain hole while flowing to avoid unnecessary ground erosion.
The Truflo TF#300 comes standard with all brass working parts, 2 ½” NST outlet, 2” vertical inlet and is self‐draining, non‐freezing). The Truflo TF#300 is fully serviceable from above ground – no digging! Flushing
g gg g
Standard Features•3’ Bury or Less•2” FIP Vertical Inlet•2½” NST Outlet•Aluminum Casing Guard•Bronze Head Stock and Cap•Brass Interior Operating Parts•Bronze Valve Body•Stainless Steel Interior Operating Rod•Stainless Steel Exterior Casing Pipe•Operating Handle
When Plunger is Raised, Water Flows Around
Plunger Housing Allowing for a Full
•Operating Handle•Self –Draining, Non‐Freezing
Additional Options and Accessories•Depths of Bury Over 3’•Any nozzle up to 2½” NST•Horizontal Inlet•Brass or Galvanized Interior Operating Rod
Dual‐Channel Flow
•Brass or Galvanized Exterior Casing Pipe•2” MJ Inlet Brass Adapter
Approx. shipping weight 35lbs. for 3ft. Bury
Spec sheets, installation details and additional resources are available at
www.hydrants.com/products
311‐800‐231‐3990 / www.hydrants.com
S li St tiEclipse #88 Sampling Station (bacteriological)Permanent Sampling Station for All Climates
Sampling Stations
The Eclipse #88 Sampling Station is designed specifically for collecting bacteriological and other water samples at a designated point directly from the water main. The #88 provides a 24/7 designated sampling site to retrieve samples at any time versus sampling from homes and businesses. Sampling stations have been shown to lower false positives, speed collection times, and reduce liability concerns. Sampling stations have been approved for use in the EPA’s Total Coliform Rulethe EPA’s Total Coliform Rule.The Eclipse #88 is a non‐draining unit that comes standard with an all brass waterway and a lockable cast‐aluminum enclosure. Unit is manual‐draining, non‐freezing with use of an attachable manual hand pump (sold separately). An extreme cold climate protection package and low‐lead brass are also available. The Eclipse #88 is fully serviceable from above ground – no digging!above ground no digging!
ng S
tatio
ns
Standard Features•3’ Bury or Less•¾” FIP Inlet •Unthreaded Nozzle•Lockable Cast‐Aluminum Enclosure•All Brass Working Parts and Waterway•Freeze‐Proof (with use of a hand pump)
Sam
pli •Freeze‐Proof (with use of a hand pump)
•100% Serviceable from Above Ground
Additional Options and Accessories•Any Depths of Bury over 3’•Threaded Nozzle•PSI Gauge with Custom Threaded Nozzle•Brass Exterior Piping
Optional Plastic Cover
Optional Casted Door Logo
•Pedestal •¼” Ball Valve Versus ¼” Standard Pet‐Cock•Extreme Cold Climate Package•Casted Door Logo•Plastic Enclosure•Hand Pump •Larger Pump for Extreme Cold Climate
Optional Pedestal
Evacuation Hand Pump
PLEASE CONSIDER EXTREME COLD CLIMATE OPTION FOR DEPTHS OF BURY 5’ AND GREATER
Approx. shipping weight 42 lbs. for 3ft. Bury
Spec sheets, installation details and additional resources are available at
www.hydrants.com/products
Optional Pedestal
321‐800‐231‐3990 / www.hydrants.com
S li St tiSampling Stations
The Eclipse #88‐SS Surgical Stainless Steel Sampling
Eclipse #88‐SS Sampling Station (bacteriological)Permanent Sampling Station for All Climates
The Eclipse #88 SS Surgical Stainless Steel Sampling Station is designed specifically for collecting bacteriological samples at a designated point directly from the water main. The #88‐SS provides a 24/7 designated sampling site to retrieve samples at any time versus sampling from homes and businesses. Sampling stations have been shown to lower false positives, speed collection times and reduce liability concerns Samplingcollection times, and reduce liability concerns. Sampling Stations have been approved for use by the EPA’s Total Coliform Rule.The Eclipse #88‐SS is a non‐draining unit that comes standard with an all surgical stainless steel waterway and a lockable cast‐aluminum enclosure. Unit is non‐freezing with use of manual evacuation hand pump (sold separately) Extreme cold climate package available for
Sam
pling S
separately). Extreme cold climate package available for depths of bury of 5’ or more. The Eclipse #88‐SS is fully serviceable from above ground – no digging!
Standard Features•3’ Bury or Less•½” FIP Inlet tations
•Unthreaded Nozzle•Lockable Cast‐Aluminum Enclosure•All Stainless Steel Working Parts and Waterway•Freeze‐Proof (with the use of a hand pump)•100% Serviceable from Above Ground
Additional Options and Accessories•Any Depths of Bury over 3’
Optional Plastic Cover
Optional Casted Door Logo
#88‐SS
Any Depths of Bury over 3•Pedestal •Extreme Cold Climate Package•Casted Door Logo•Plastic Enclosure•Evacuation Hand Pump •Larger Pump for Extreme Cold Climate
Evacuation Hand Pump
Spec sheets, installation details and additional resources are available at
www.hydrants.com/products
33
PLEASE CONSIDER EXTREME COLD CLIMATE OPTION FOR DEPTHS OF BURY 5’ AND GREATER
Approx. shipping weight 42 lbs. for 3ft. Bury
1‐800‐231‐3990 / www.hydrants.com
Optional Pedestal
S li St tiSampling Stations
The Eclipse #88WC Sampling Station is designed
Eclipse #88WC Sampling Station (bacteriological)Permanent Sampling Station for Warm Climates
Standard Low‐Lead Brass!
The Eclipse #88WC Sampling Station is designed specifically for collecting bacteriological samples at a designated point directly from the water main. The #88WC provides a 24/7 designated sampling site to retrieve samples at any time, versus sampling from homes and businesses. Sampling stations have been shown to lower false positives, speed collection times, and reduce liability concerns Sampling stations areand reduce liability concerns. Sampling stations are approved for use in the EPA’s Total Coliform Rule.The Eclipse #88WC is a non‐draining warm climate unit that comes standard with an all brass waterway and a lockable cast‐aluminum enclosure. The option of a durable plastic enclosure is also available. The Eclipse #88WC is fully serviceable from above ground – no di i !
ng S
tatio
ns
digging!
Standard Features•1’ Bury •All Brass Parts and Waterway
Sam
pli All Brass Parts and Waterway
•Lockable Cast‐Aluminum Enclosure•1” MIP Inlet• Non‐Draining
Additional Options and Accessories•Any Depths of Bury over 1’•Pedestal
Optional Plastic Cover
Optional Casted Door Logo
•PSI Gauge•Casted Door Logo•Plastic Enclosure•Stainless, PVC Construction•Customized Units Available
Approx. shipping weight 40lbs. for 1ft. BuryOptional Pedestal
Optional PSI Gauge
Approx. shipping weight 40lbs. for 1ft. Bury
Spec sheets, installation details and additional resources are available at
www.hydrants.com/products
1‐800‐231‐3990 / www.hydrants.com34
S li St tiSampling Stations
The Eclipse #88WC‐SS Sampling Station is designed
Eclipse #88WC‐SS Sampling Station (bacteriological)Permanent Sampling Station for Warm Climates
The Eclipse #88WC SS Sampling Station is designed specifically for collecting bacteriological samples at a designated point directly from the water main. The #88WC‐SS provides a 24/7 designated sampling site to retrieve samples at any time, versus sampling from homes and businesses. Sampling stations have been shown to lower false positives, speed collection times, and reduce liability concerns Sampling Stations haveand reduce liability concerns. Sampling Stations have been approved for us by the EPA’s Total Coliform Rule.The Eclipse #88WC‐SS is a warm climate unit that comes standard with an all surgical stainless steel waterway and a lockable cast‐aluminum enclosure. The Eclipse #88WC‐SS is fully serviceable from above ground – no digging!
Sam
pling SStandard Features•1’ Bury tations
Optional Plastic Cover
Optional Casted Door Logo
•1 Bury •All Surgical Stainless Steel Parts and Waterway•Lockable Cast‐Aluminum Enclosure•½” MIP Inlet and Flow• Non‐Draining
Additional Options and Accessories•Any Depths of Bury over 1’
Optional Pedestal
#88WC‐SS
•Pedestal •Casted Door Logo•Plastic Enclosure
Approx. shipping weight 40lbs. for 1ft. Bury
Spec sheets, installation details and additional resources are available at
www.hydrants.com/products
351‐800‐231‐3990 / www.hydrants.com
S li St tiSampling Stations
TheMainGuard #66 Surgical Stainless Steel Sampling
MainGuard #66 Sampling Station (bacteriological)Permanent Sampling Station for All Climates
The MainGuard #66 Surgical Stainless Steel Sampling Station is designed specifically for collecting bacteriological samples at a designated point directly from the water main. The MainGuard #66 provides a 24/7 designated sampling site to retrieve samples at any time versus sampling from homes and businesses. Sampling stations have been shown to lower false positives speed collection times and reduce liabilitypositives, speed collection times, and reduce liability concerns. Sampling stations have been approved for use by the EPA’s Total Coliform Rule.The MainGuard #66 is a non‐draining unit that comes standard with an all surgical stainless steel waterway and a lockable aluminum enclosure. Unit is non‐freezing with use of manual evacuation hand pump. Extreme cold climate package available for depths of bury of 5’ orclimate package available for depths of bury of 5 or more. The Eclipse #88 is fully serviceable from above ground – no digging!
Standard Features•3’ Bury or Less•½” FIP Inlet /
ng S
tatio
ns
Flange BottomOptionWith
•7/16” Unthreaded Nozzle•Lockable Aluminum Enclosure•All Stainless Steel Working Parts and Waterway•Freeze‐Proof (with the use of a hand pump)•100% Serviceable from Above Ground
Additional Options and Accessories•Any Depths of Bury over 3’
Sam
pli Powder‐
CoatedPaint
Optional Plastic Cover
Any Depths of Bury over 3•Customize Enclosure Height / Flange•Extreme Cold Climate Package•Plastic Enclosure•Powder‐Coated Enclosure•Evacuation Hand Pump •Larger Pump for Extreme Cold Climate #66Evacuation
Hand PumpL k bl Al i
Spec sheets, installation details and additional resources are available at
www.hydrants.com/products
PLEASE CONSIDER EXTREME COLD CLIMATE OPTION FOR DEPTHS OF BURY 5’ AND GREATER
Approx. shipping weight 42 lbs. for 3ft. Bury
1‐800‐231‐3990 / www.hydrants.com36
Lockable AluminumEnclosure
S li St tiSampling Stations
The MainGuard #66 Sampling Station is designed
MainGuard #66WC Sampling Station (bacteriological)Permanent Sampling Station for Warm Climates
The MainGuard #66 Sampling Station is designed specifically for collecting bacteriological samples at a designated point directly from the water main. The MainGuard #66WC provides a 24/7 designated sampling site to retrieve samples at any time, versus sampling from homes and businesses. Sampling stations have been shown to lower false positives, speed collection times and reduce liability concerns Sampling Stationstimes, and reduce liability concerns. Sampling Stations have been approved for use by the EPA’s Total Coliform Rule.The MainGuard #66WC is a warm climate unit that comes standard with an all surgical stainless steel waterway and a lockable aluminum enclosure. The MainGuard #66 is fully serviceable from above ground –
di i !
Sam
pling S
no digging!
Standard Features•1’ Bury tations
•1 Bury •All Surgical Stainless Steel Parts and Waterway•Lockable Aluminum Enclosure•½” MIP Inlet and Flow•Non‐Draining
Additional Options and Accessories•Any Depths of Bury over 1’
Optional Plastic Cover Lockable AluminumEnclosure
Flange Bottom
•Customized Enclosure Height / Flange•Plastic Enclosure
Approx. shipping weight 40lbs. for 1ft. Bury #66WC
BottomOptionWith
Powder‐CoatedPaint
Spec sheets, installation details and additional resources are available at
www.hydrants.com/products
371‐800‐231‐3990 / www.hydrants.com
S li St tiSampling Stations
The Eclipse #82 Sampling Station is designed specifically for
Eclipse #82 Sampling Station (bacteriological)Permanent Sampling Station for All Climates
The Eclipse #82 Sampling Station is designed specifically for collecting bacteriological samples at a designated point directly from the water main. The #82 provides a 24/7 designated sampling site to retrieve samples at any time, versus sampling from homes and businesses. Sampling stations have been shown to lower false positives, speed collection times, and reduce liability concerns. Sampling Stations have been approved for use by the EPA’s Total pp yColiform Rule.The Eclipse #82 is an all climate unit that comes standard with an all stainless steel waterway, temperature control valve (non‐freezing unit ) and a lockable UV resistant enclosure (1” model also available). The option of a powder‐coated steel enclosure is also available. The Eclipse #82 is fully serviceable from above ground – no digging!
ng S
tatio
ns
Standard Features•1’ Bury •All Stainless Steel Parts and Waterway
Sam
pli All Stainless Steel Parts and Waterway
•Lockable UV‐Resistant Enclosure•2” Inlet, 2” Ball Valve Blow‐Off•3/8” Sampling Point w/ ¼” Ball Valve• Freeze‐Proof Temperature Control Valve
Additional Options and Accessories•Any Depths of Bury over 1’
Optional Powder‐CoatedLockable Steel Enclosure
•Powder‐Coated Steel Enclosure
Approx. shipping weight 75lbs. for 1ft. Bury
Hex‐Lock for Security
Temperature Control Valve and Sampling
PointApprox. shipping weight 75lbs. for 1ft. Bury
Spec sheets, installation details and additional resources are available at
www.hydrants.com/products
1‐800‐231‐3990 / www.hydrants.com38
S li St tiMainGuard #94WM Sampling StationInstalls and resets into Existing Customer Meter Box
Sampling Stations
The MainGuard #94WM Sampling Station is designedThe MainGuard #94WM Sampling Station is designed specifically for collecting bacteriological samples at a designated point directly from the main water line. The #94WM provides a 24/7 designated sampling site to retrieve samples at any time versus sampling from homes and businesses. Sampling stations have been shown to lower false positives, speed collection times, and lower liability concerns. Sampling Stations have been approved y p g ppfor use by the EPA’s Total Coliform Rule.
The MainGuard #94WM is a non‐draining unit that comes standard with an all brass waterway and fits into a standard 5/8” x ¾” existing meter setter. The unique threaded valve connects easily to the sampling rod and eliminates stress on the meter setter as with other quick‐disconnect models. The sampling rod (sold separately) includes a multi‐directional swivel blow‐off head and separate sampling bibb. The option of 1” and 2” sizes and low‐lead brass are available.
Standard Features•Installs in Existing Meter Setting (5/8” x 3/4”)•Male Valve – No Contamination
Sam
pling S
•Custom Threaded Valve (no quick disconnect)
Additional Options and Accessories•All Brass Sampling Rod (variable lengths)•Carrying Case•Brass Valve Cover•5/8” and 1” Resetter Model•Low‐Lead Brass
tations
Low Lead Brass
Approx. shipping weight 42 lbs.
No Meter Box?Same sampling nozzle can be housed in either a galvanized
Spec sheets, installation details and additional resources are available at
www.hydrants.com/products
1‐800‐231‐3990 / www.hydrants.com
housed in either a galvanized enclosure or 5¼” valve box
MainGuard #92 / MainGuard #92VB
39
W t Q lit St tiEclipse #9900 Water Quality StationPermanent All‐In‐One Station for All Climates
Water Quality Stations
The Eclipse model #9900 allows a water company to install a reliable blow‐off today, that can be converted into an automatic flushing device in the future. The initial unit comes standard with a 4” blow‐off (2” option available) and sampling point for bacteriological samples, but is equipped for easy installation of a 1” automatic flushing component. A continuous flushing component is also an option.tio
ns
Manual Flushing (2”or 4”)p p
Each station comes with a lockable, UV resistant enclosure. The Eclipse #9900 is fully serviceable from above ground – no digging!
ter Q
ualit
y S
tat
Sampling Station
Wat
Standard Features•3’ Bury or Less•4” MJ Inlet•4” FIP Outlet• Self Draining, Non‐Freezing•Auto Flushing “Ready”
Automatic Flushing
Auto Flushing Ready•Bac‐T Sampling Point•Manual Drain On/Off•Locking UV‐Resistant Enclosure
Additional Options and Accessories•Any Depths of Bury over 3’•6” MJ Inlet
Continuous Flushing
Lockable Enclosure
•1” Automatic Option•Sampling Rod and Case•Continuous Flushing Rod•2” or 4” Riser•Optional Outlet Sizes•Dechlorination Tablet Basket
4” Model = Approx. shipping weight 200 lbs. for 3ft. Bury
See Page 2
4 Model Approx. shipping weight 200 lbs. for 3ft. Bury2” Model = Approx. shipping weight 120 lbs. for 3ft. Bury
Spec sheets, installation details and additional resources are available at
www.hydrants.com/products
401‐800‐231‐3990 / www.hydrants.com
W t Q lit St tiWater Quality Stations
The Eclipse model #9900WC‐2 allows a water company
Eclipse #9900WC Water Quality StationPermanent All‐In‐One Station for Warm Climates
Wate
The Eclipse model #9900WC 2 allows a water company to install a reliable blow‐off today, that can be converted into an automatic flushing device in the future. The initial unit comes standard with a 2” blow‐off and sampling point for bacteriological samples, but is equipped for easy installation of a 1” automatic flushing component. A continuous flushing component is also an option
er Quality S
tatio
option.
Each station comes with a lockable, UV resistant enclosure. The Eclipse #9900WC‐2 is fully serviceable from above ground – no digging!
ons
Standard Features•1’ Bury
Lockable EnclosureSee Page 2
•2” FIP Inlet•2” MIP Outlet•Non‐Draining•Auto Flushing Ready•Bac‐T Sampling Point•Locking Enclosure with Key
Additional Options and AccessoriesAdditional Options and Accessories•Any Depths of Bury over 1’•1” Automatic Option•Sampling Rod and Case•Continuous Flushing Rod•2” Riser•Dechlorination Option
2” Model = Approx. shipping weight 120 lbs. for 1ft. Bury
Spec sheets, installation details and additional resources are available at
www.hydrants.com/products
411‐800‐231‐3990 / www.hydrants.com
Y d H d tTotal Eclipse #1 Yard HydrantPermanent Yard Hydrant for All Climates
Yard Hydrants
The Total Eclipse model #1 yard hydrant provides the best in performance and value! Designed and engineered specifically for use in parks, campgrounds, golf courses and homes for non‐drinking use. The Total Eclipse #1 has a unique decorative heavy cast iron top stock and four‐pronged turn handle. Tamper proof key operated option available.
The Total Eclipse model #1 comes standard with all brass working parts, the option of ¾” GHT or 1” MIP hose connection and ¾” or 1” MIP Inlet, self draining non‐freezing drain and key lock option. The Total Eclipse #1 is fully serviceable from above ground – no digging!
Standard Features•3’ Bury or Less•¾” or 1” MIP Inlet
Yard
Hyd
rant
s ¾ or 1 MIP Inlet•All Brass Working Parts•Self‐Draining, Non‐Freezing
Additional Options and Accessories•Any Depths of Bury over 3’•¾” Vacuum Breaker for Nozzle•1” Check Valve for Nozzle
/Y •1” x 3/4" Brass Reducing Adapter•Key Operated•Galvanized Interior Operating Rod•Galvanized Exterior Casing Pipe
Approx. shipping weight for ¾” 29 lbs.Approx. shipping weight for 1” 37 lbs.
Specification sheets and additional resources are available at
www.hydrants.com/products
421‐800‐231‐3990 / www.hydrants.com
Y d H d tYard Hydrants
The Total Eclipse model #7 yard hydrant provides the
Total Eclipse #7 Yard HydrantPermanent Yard Hydrant for All Climates
The Total Eclipse model #7 yard hydrant provides the best in performance and value! Designed and engineered specifically for use in parks, campgrounds, golf courses and homes for non‐drinking use. The Total Eclipse #7 has a unique decorative heavy cast iron top stock and spring‐loaded self‐closing lift handle. Tamper proof locking option available. Best used on lines with 90 psi or less (is pressure is greater than 90 psi see our90 psi or less (is pressure is greater than 90 psi , see our Total Eclipse #1 on facing page).
The Total Eclipse model #7 comes standard with all brass working parts, the option of ¾” GHT or 1” MIP hose connection and ¾” or 1” MIP Inlet, self draining non‐freezing drain and locking option. The Total Eclipse g g p p#7 is fully serviceable from above ground – no digging!
Standard Features•3’ Bury or Less•¾” or 1” MIP Inlet Yard H
ydrants
•Spring‐Loaded, Self‐Closing Handle•All Brass Working Parts•Self‐Draining, Non‐Freezing
Additional Options and Accessories•Depths of Bury Over 3’•3/4" Vacuum Breaker for Nozzle•1” x 3/4" Brass Reducing Adapter s1 x 3/4 Brass Reducing Adapter•Lockable Feature
Approx. shipping weight for ¾” 30 lbs. +2 lbs. for every 6”Approx. shipping weight for 1” 38 lbs. +2 lbs. for every 6”
Specification sheets and additional resources are available at
www.hydrants.com/products43
1‐800‐231‐3990 / www.hydrants.com
Y d H d tTotal Eclipse #36 Street WasherPermanent Box Hydrant for All Climates
Yard Hydrants
The Total Eclipse model #36 Street Washer is designed and engineered for wash down and filling needs. The Total Eclipse #36 provides a point to retrieve water to wash down sidewalks and streets or used to water gardens and lawn areas. The Total Eclipse #36 sits flush with the ground saving space in walking areas. The cast iron box and lid is not traffic rated.
The Total Eclipse #36 comes standard with all brass working parts, available nozzle and Inlet sizes are ¾” or 1”, compression type self draining non‐freezing drain, cast iron box and lid. The Total Eclipse model #36 is fully serviceable from above ground – no digging!
Standard Features•3’ Bury or Less•Cast iron Box
Yard
Hyd
rant
s Cast iron Box•¾” or 1” MIP Inlet•All Brass Working Parts•Key Operated
Additional Options and Accessories•Any Depths of Bury over 3’•Locking Lid
Y •Brass Box & Lid•Deep Box•¾” Vacuum Breaker with Deep Box•1” Check Valve with Deep Box•Galvanized Pipe•#159 Key (spare)
Approx. shipping weight for ¾” 20 lbs. + 2 lbs for every 6”
Specification sheets and additional resources are available at
www.hydrants.com/products
Approx. shipping weight for ¾ 20 lbs. + 2 lbs for every 6Approx. shipping weight for 1” 22 lbs + 3 lbs. for every 6”
441‐800‐231‐3990 / www.hydrants.com
Y d H d tYard Hydrants
Kupferle’s Yard Hydrant Companion is a pre‐installation
Total Eclipse #3400 Yard Hydrant CompanionPermanent Yard Hydrant Companion for All Climates
Kupferle s Yard Hydrant Companion is a pre installation sleeve for any ¾” yard hydrant. Install the Yard Hydrant Companion first, and then slide any ¾” yard hydrant down the sleeve and screw it onto the Yard Hydrant Companion’s internal ¾” nipple. Clamps at the ground line hold the hydrant in place. Then, when your hydrant needs to be replaced it can be done WITHOUT DIGGING! Just undo the clamps unscrew the entireDIGGING! Just undo the clamps, unscrew the entire hydrant and then repair and replace or install a new hydrant into the sleeve. Available in any depth of bury.
Standard Features
Additional Options and Accessories•Depths of Bury over 3’
Yard Hydrantss
Approx. shipping weight 25 lbs. +2 lbs. for every 6” See our compatible Yard Hydrants on page
44-45
Specification sheets and additional resources are available at
www.hydrants.com/products
451‐800‐231‐3990 / www.hydrants.com
Y d H d tCorn King #903 Yard HydrantPermanent Yard Hydrant for All Climates
Yard Hydrants
The Corn King model #903 Yard hydrant is designed as a “dry and wet” pipe principal of construction. The outer or dry pipe encloses and protects the inside parts while the inner or wet pipe protects water as it passes to the brass outlet nozzle.
The Corn King model #903 comes standard with galvanized inside and outside pipe with all brassgalvanized inside and outside pipe with all brass working parts, ¾” FIP Inlet and ¾” GHT outlet, self draining non‐freezing drain. The Corn King model #903 is fully serviceable from above ground – no digging!
Standard Features•3’ Bury or Less•Compression Type
Yard
Hyd
rant
s Compression Type•True ‘dry pipe’ design•¾” FIP Inlet•¾” Hose Outlet•Galvanized Pipe
Additional Options and Accessories•Any Depths of Bury over 3’
Y •¾” Vacuum Breaker for Nozzle• Lockable Enclosure
Approx. shipping weight 25 lbs + 5 lbs. for every 6”
#903 shown with optional cast‐aluminum lockable enclosure,
great for ball fields, garden areas, etc.
Specification sheets and additional resources are available at
www.hydrants.com/products
461‐800‐231‐3990 / www.hydrants.com
Y d H d tYard Hydrants
The Corn King model #909 Yard hydrant is designed as a
Corn King #909 Yard HydrantPermanent Yard Hydrant for All Climates
The Corn King model #909 Yard hydrant is designed as a “dry and wet” pipe principal of construction. The outer or dry pipe encloses and protects the inside parts while the inner or wet pipe protects water as it passes to the brass outlet nozzle. Best used on lines with 90 psi or less (is pressure is greater than 90 psi , see our Corn King #903 on facing page).
The Corn King model #909 comes standard with galvanized inside and outside pipe with all brass working parts, ¾” FIP Inlet and ¾” GHT Outlet, self draining non‐freezing drain. The Corn King model #909 is fully serviceable from above ground – no digging!
Standard Features•3’ Bury or Less•Spring–Loaded, Self‐Closing Type Yard H
ydrants
•True ‘dry pipe’ design•¾” FIP Inlet•¾” Hose Outlet•Galvanized Pipe
Additional Options and Accessories•Any Depths of Bury Over 3’•¾” Vacuum Breaker for Nozzle s¾ Vacuum Breaker for Nozzle•Lockable Features
Approx. shipping weight 25 lbs. + 5 lbs for every 6”
Specification sheets and additional resources are available at
www.hydrants.com/products
471‐800‐231‐3990 / www.hydrants.com
N lt ItHydrant LampAuthentic Brass‐Plated Hydrant Lamp
Novelty Items
The Kupferle Foundry Company, maker of hydrants for over 150 years, now offers its 19th century decorative Eclipse #2 post hydrant as a lamp! Made of solid cast‐iron and then brass‐plated to provide it with a beautiful finish, this unique lamp will become one of your most prized possessions!
Dimensions: 30” H x 7¾” W
NEW
Dimensions: 30 H x 7¾ W
Weight: 36 lbs.
Only $349.99Order direct by calling 800‐231‐3990 or faxing an order
form to 314‐231‐2820Order forms can be found at
h d t /h d tl
Puppy Dog HydrantAuthentic Cast‐Iron Hydrant
NEW
www.hydrants.com/hydrantlamp
The Kupferle Foundry Company, maker of authentichydrants for over 150 years, now offers its 19th
century decorative Eclipse #2 post hydrant to dogowners! This original cast‐iron hydrant comes with a
personalized name plate and chain. Optional urn that fits inside also available, making it a lasting memorial to your
faithful friend and companion.
NEW
Dimensions: 23” H x 7¾” W
Weight: 36 lbs.
Only $199.99
Order direct by calling 800‐231‐3990 or faxing an order form
t 314 231 2820to 314‐231‐2820Order forms can be found at
www.hydrants.com/puppydoghydrant
481‐800‐231‐3990 / www.hydrants.com
O d i I f i /A f Q liOrdering Information/Assurance of Quality
Placing Orders by Fax:314‐231‐2820
The Kupferle Foundry Company proudly sells its
products through waterworks
For Product Inquiries/Quotes800‐231‐3990
F P t /C t S i
products through waterworks distributors across the United States and Canada. To obtain pricing on Kupferle products,
please contact your local waterworks distributor(s) or call 1 800 231 3990 for a listing ofFor Parts/Customer Service
800‐231‐3990
Spec Sheets, Installation Details, Cut Sheets, Product Info:h d t / d t
1-800-231-3990 for a listing of distributors in your area.
www.hydrants.com/products
Kupferle is proud to state that its products are made in America! We guarantee our product’s parts and labor for up to one full year (automatic flushing units up to three years) under normal installation and operational use. Additionally, Kupferle strives to deliver not only the best in quality products, but also customer service. If you have an issue with any Kupferle product, please contact us at 1‐800‐231‐3990.
In response to the ARRA Compliance of Manufactured Goods as American Made, The Kupferle Foundry Company provides answers to three (3) questions furnished by the USEPA that determines The Kupferle Foundry Companymeets the ARRA compliance. To obtain a copy of our compliance document please go to our website at www hydrants comdocument, please go to our website at www.hydrants.com
Kupferle offers low‐lead brass versions of the following products:•Eclipse Automatic Flushing devices (all models)•Eclipse #88•Eclipse #88WC, standard•MainGuard #77, #78•MainGuard #94WM•Truflo TF200, TF250•Truflo TF500, TF550, TF800•Total Eclipse #1, #7, #36•Corn King #903, #909
Low Lead
1‐800‐231‐3990 / www.hydrants.com
1‐800‐231‐3990 toll free • www.hydrants.com • [email protected] • 314‐231‐2820 fax
2511 North 9th Street, St. Louis, MO 63102