BRUNNER WATER BOILERS

Kamin-Kessel 45/101lifting doors

made in germany

State: 25.02.2013

Kamin-Kessel 45/101 lifting doorsDimension sheet |

with mounting frame 50 mm

VL supply 1"RL return boiler 1"E drain 1/2"SVL supply cooling pipe outletSRL return cooling pipe outletFTAS socket for thermometer cooling TF1 socket 1/2" for thermometerTF2 socket 1/2" for thermometer

with mounting frame 70 mm

VL supply 1"RL return boiler 1"E drain 1/2"SVL supply cooling pipe outletSRL return cooling pipe outletFTAS socket for thermometer cooling TF1 socket 1/2" for thermometerTF2 socket 1/2" for thermometer

We suggest for CAD planing Palette CAD. Permanent updated drawings: www.brunner.deFrames / front versions are marked colored.Art.-Nr I019490 flue gas adapter for horizontal outlet (E= 250mm / A= 200mm)

Kamin-Kessel 45/101 lifting doorsDimension sheet |

with door frame

VL supply 1"RL return boiler 1"E drain 1/2"SVL supply cooling pipe outletSRL return cooling pipe outletFTAS socket for thermometer cooling TF1 socket 1/2" for thermometerTF2 socket 1/2" for thermometer

We suggest for CAD planing Palette CAD. Permanent updated drawings: www.brunner.deFrames / front versions are marked colored.Art.-Nr I019490 flue gas adapter for horizontal outlet (E= 250mm / A= 200mm)

Planning and installationKamin-Kessel 45/101

meets requirement limit values forGermany / Austria / Switzerland / Norway 1.BlmSchV (Stufe 2) / 15. BVG / LRV / -

Rated heat power

Combustion performanceFlue gas mass flow

adjoining cast iron radiator (GNF10)accumulation rings (MAS)adjoining ceramic accumulatorceramic modular accumulator (KMS system)water boiler

Necessary supply pressure

Firewood consumption

Combustion air consumptionCombustion air connection

Distance to oven chamber wallDistance to floor

WallFloorCeilingBrick lining of protected walls

Data for functional demonstration

Flue gas temperature after

Heat distribution

Cross-section of gratings for max. warm air power

Space inside oven chamber

Heat insulation without / with

Insert / heating surface

Boiler

attached steel smoke hood

Outlet temperature (before heating surface)

Supply airWarm air

kWkg/hkWg/sC

CCCCCCPam/hmm

%

%

cmcm

cmcm

cmcmcmcm

Tested according to

Glass (single / double)

1)

2)

%

max. operating pressuremax. flow temperatureWater volumeConnections flow / return

Water boiler databarClitresinch

EN 13229 W

WeightFireplace + burning chamber 182 + 154 + 89kg

3) air gratings

EN 13229 W

4)

-

24,521,5

----

2001555125

62

20

1010

3100551

-

15 / -

45 - 50

400400

6

40 / 35

19

2315

----

1701245

125

62

201010

-

15 / -

45 - 50

400400

5,2

40 / 35

3100551

Ulrich Brunner GmbHZellhuber Ring 17 -18D-84307 EggenfeldenPhone: +49 / (0)87 21 / 7 71-0Fax: +49 / (0)87 21 / 7 71-100info@brunner.de | www.brunner.de

BRUNNER products are offered and sold only by qualified dealers and service centres.Subject to technical and assortment changes. Errors excepted.

Approximate value, must be calculated eventually1)2)

Throttle flap recommended

Values with air gratings, stove casing is heat conducting3)heater = body + mounted exchanger4)

(02/13)