INTERNATIONAL ORGANISATION FOR STANDARDIZATION · (R evision of ISO 15243:2004) TC 10 Technical...
Transcript of INTERNATIONAL ORGANISATION FOR STANDARDIZATION · (R evision of ISO 15243:2004) TC 10 Technical...
ISO NORMEN / NORMES ISO1
Le NBN se charge de vous procurer toutespublications Internationales moyennantremboursement de ses frais.Veuillez bien préciser lors de votre commande laversion linguistique désirée, d’avance merci.Nous vous rappelons que tout document peut aussi êtreconsulté en notre bibliothèque, les jours ouvrables de9:00 à 16:00, le vendredi de 9:00 à 13:00.
INTERNATIONALORGANISATION FORSTANDARDIZATION
Nouvelles publicationsNieuwe publicaties
Les documents ISO existent en anglais et en françaisDe ISO-documenten bestaan in het Engels en in hetFrans.
Het NBN bezorgt U alle internationale publicaties, mitsterugbetaling van de kosten.Gelieve bij uw bestelling de gewenste taalkundigeversie te preciseren, dank U bij voorbaat.Elk document kan ook geraadpleegd worden in onzebibliotheek, op werkdagen van 9:00 tot 16:00, op vrijdagvan 9:00 tot 13:00.
PROJETS DE NORMESDIFFUSESPériode du 1er janvier 2016 au 31 janvier 2016.*Actuellement disponible en anglais seulement.
PC 278 Anti-bribery management systemsISO/DIS37001
Anti-bribery management systems
PC 286 Collaborative business relationshipmanagement -- Framework
ISO/DIS11000
Collaborative business relationshipmanagement — Framework
TC 1 Screw threadsISO/DIS 2901 ISO metric trapezoidal screw threads — Basic
and design profiles(Revision of ISO 2901:1993)
ISO/DIS 2902 ISO metric trapezoidal screw threads —General plan(Revision of ISO 2902:1977)
ISO/DIS 2903 ISO metric trapezoidal screw threads —Tolerances(Revision of ISO 2903:1993)
TC 4 Rolling bearingsISO/DIS15243
Rolling bearings — Damage and failures —Terms, characteristics and causes(Revision of ISO 15243:2004)
TC 10 Technical product documentationISO/DIS81346-12
Industrial systems, installations and equipmentand industrial products — Structuringprinciples and reference designations — Part12: Construction works and building services
TC 12 Quantities and unitsISO/DIS80000-5
Quantities and units — Part 5:Thermodynamics(Revision of ISO 80000-5:2007)
TC 20 Aircraft and space vehiclesISO 8056-2:1988/DAmd1
Aircraft — Nickel-chromium and nickel-aluminium thermocouple extension cables —Part 2: Terminations — General requirementsand tests — Amendment 1
ISO/DIS 43 Aircraft — Jacking pads(Revision of ISO 43:1976)
ISO/DIS12604-1
Aircraft ground handling — Checked baggage— Part 1: Mass and dimensions
TC 22 Road vehiclesISO/DIS12251
Diesel engines — Clamp mounted CR fuelinjectors — Mounting dimensions
ISO NORMEN / NORMES ISO2
(Revision of ISO 12251:2011)
ISO/DIS19724
Gasoline engines with direct injection —Cleanliness assessment of fuel injectionequipment
ISO/DIS22241-1
Diesel engines — NOx reduction agent AUS32 — Part 1: Quality requirements(Revision of ISO 22241-1:2006)
ISO/DIS22241-3
Diesel engines — NOx reduction agent AUS32 — Part 3: Handling, transportation andstoring(Revision of ISO 22241-3:2008)
ISO/DIS29061-3
Road vehicles — Methods and criteria forusability evaluation of child restraint systemsand their interface with vehicle anchoragesystems — Part 3: Installation of child restraintsystems using vehicle seat belts
ISO/DIS29061-4
Road vehicles — Methods and criteria forusability evaluation of child restraint systemsand their interface with vehicle anchoragesystems — Part 4: Securing of child in childrestraint system and daily handling aspects
ISO/DIS29061-5
Road vehicles — Methods and criteria forusability evaluation of child restraint systemsand their interface with vehicle anchoragesystems — Part 5: Installation and securing ofchild in a booster seat
ISO/DIS15005
Road vehicles — Ergonomic aspects oftransport information and control systems —Dialogue management principles andcompliance procedures(Revision of ISO 15005:2002)
ISO/DIS15008
Road vehicles — Ergonomic aspects oftransport information and control systems —Specifications and test procedures for in-vehicle visual presentation(Revision of ISO 15008:2009)
TC 23 Tractors and machinery for agricultureand forestry
ISO 4254-12:2012/DAmd 1
Agricultural machinery — Safety — Part 12:Rotary disc and drum mowers and flail mowers— Amendment 1
ISO 5395-3:2013/DAmd2
Garden equipment — Safety requirements forcombustion-engine-powered lawnmowers —
Part 3: Ride-on lawnmowers with seatedoperator — Amendment 2: Cutting meansenclosure guards
TC 28 Petroleum products and relatedproducts of synthetic or biologicalorigin
ISO/DIS 4259-1
Petroleum products - Precision ofmeasurement methods and results — Part 1:Determination of precision data in relation tomethods of test(Revision of ISO 4259:2006)
ISO/DIS 4259-2
Petroleum and related products — Precision ofmeasurement methods and results — Part 2:Interpretation and application of precision datain relation to methods of test
(Revision of ISO 4259:2006)
ISO/DIS 8216-1
Petroleum products — Fuels (class F)classification — Part 1: Categories of marinefuels(Revision of ISO 8216-1:2010)
ISO/DIS 8217 Petroleum products — Fuels (class F) —Specifications of marine fuels(Revision of ISO 8217:2012)
ISO/DIS19970
Refrigerated hydrocarbon and non-petroleumbased liquefied gaseous fuels — Metering ofgas as fuel on LNG carriers during cargotransfer operations
TC 29 Small toolsISO/DIS16084
Balancing of rotating tools and tool systems
ISO/DIS 6789-1.2
Assembly tools for screws and nuts — Handtorque tools — Part 1: Requirements andmethods for design conformance testing andquality conformance testing — Minimumrequirements for certificates of conformance(Revision of ISO 6789:2003)
ISO/DIS 6789-2.2
Assembly tools for screws and nuts — Handtorque tools — Part 2: Requirements forcalibration and determination of measurementuncertainly(Revision of ISO 6789:2003)
TC 31 Tyres, rims and valvesISO/DIS16392
Tyres — Electrical resistance — Test methodfor measuring electrical resistance of tyres ona test rig(Revision of ISO 16392:2007)
TC 34 Food productsISO/DIS12099
Animal feeding stuffs, cereals and milledcereal products — Guidelines for theapplication of near infrared spectrometry(Revision of ISO 12099:2010)
ISO/DIS 2292 Cocoa beans — Sampling(Revision of ISO 2292:1973)
TC 35 Paints and varnishesISO/DIS16773-4.2
Electrochemical impedance spectroscopy(EIS) on coated and uncoated metallicspecimens — Part 4: Examples of spectra ofpolymer-coated and uncoated specimens(Revision of ISO 16773-4:2009)
ISO/DIS12944-1
Paints and varnishes — Corrosion protectionof steel structures by protective coatingsystems — Part 1: General introduction(Revision of ISO 12944-1:1998)
ISO/DIS12944-2
Paints and varnishes — Corrosion protectionof steel structures by protective coatingsystems — Part 2: Classification ofenvironments(Revision of ISO 12944-2:1998)
ISO/DIS12944-3
Paints and varnishes — Corrosion protectionof steel structures by protective coatingsystems — Part 3: Design considerations
ISO NORMEN / NORMES ISO3
(Revision of ISO 12944-3:1998)
ISO/DIS12944-7
Paints and varnishes — Corrosion protectionof steel structures by protective coatingsystems — Part 7: Execution and supervisionof paint work(Revision of ISO 12944-7:1998)
TC 38 TextilesISO/DIS16847
Textiles - Test method for assessing thematting appearance of napped fabrics aftercleansing
TC 39 Machine toolsISO/DIS 3875 Machine tools — Test conditions for external
cylindrical centreless grinding machines —Testing of the accuracy(Revision of ISO 3875:2004)
TC 42 PhotographyISO/DIS18935
Imaging materials — Colour images —Determination of water resistance of printedcolour images(Revision of ISO 18935:2005, ISO18935:2005/Cor 1:2007)
TC 43 AcousticsISO/DIS12354-1
Building acoustics — Estimation of acousticperformance of buildings from the performanceof elements — Part 1: Airborne soundinsulation between rooms(Revision of ISO 15712-1:2005)
ISO/DIS12354-2
Building acoustics — Estimation of acousticperformance of buildings from the performanceof elements — Part 2: Impact sound insulationbetween rooms(Revision of ISO 15712-2:2005)
ISO/DIS12354-3
Building acoustics — Estimation of acousticperformance of buildings from the performanceof elements — Part 3: Airborne soundinsulation against outdoor sound(Revision of ISO 15712-3:2005)
ISO/DIS12354-4
Building acoustics — Estimation of acousticperformance of buildings from the performanceof elements — Part 4: Transmission of indoorsound to the outside(Revision of ISO 15712-4:2005)
TC 44 Welding and allied processesISO/DIS 3580 Welding consumables — Covered electrodes
for manual metal arc welding of creep-resistingsteels — Classification(Revision of ISO 3580:2010)
ISO/DIS17633
Welding consumables — Tubular coredelectrodes and rods for gas shielded and non-gas shielded metal arc welding of stainlessand heat-resisting steels — Classification(Revision of ISO 17633:2010)
ISO/DIS18276.2
Welding consumables — Tubular coredelectrodes for gas-shielded and non-gasshielded metal arc welding of highstrengthsteels — Classification
(Revision of ISO 18276:2005)
ISO/DIS20168
Resistance welding — Locking tapers forelectrode holders and electrode caps
ISO/DIS 5175-1
Gas welding equipment — Safety devices —Part 1: Incorporating a flame (flashback)arrestor(Revision of ISO 5175:1987, ISO5175:1987/Amd 1:2015)
ISO/DIS 5175-2
Gas welding equipment — Safety devices —Part 2: Not incorporating a flame (flashback)arrestor(Revision of ISO 5175:1987, ISO5175:1987/Amd 1:2015)
ISO/DIS15296
Gas welding equipment — Vocabulary —Terms used for gas welding equipment(Revision of ISO 15296:2004)
TC 45 Rubber and rubber productsISO/DIS19385
Rubber hoses and hose assemblies for waterjetting or water blasting applications
TC 54 Essential oilsISO/DIS 3054 Essential oil of lavandin Abrial (Lavandula
angustifolia Miller x Lavandula latifoliaMedikus), French type(Revision of ISO 3054:2001)
TC 58 Gas cylindersISO/DIS10156
Gas cylinders — Gases and gas mixtures —Determination of fire potential and oxidizingability for the selection of cylinder valve outlets(Revision of ISO 10156:2010, ISO10156:2010/Cor 1:2010)
ISO10297:2014/DAmd 1
Gas cylinders — Cylinder valves —Specification and type testing — Amendment1: Pressure drums and tubes
ISO14246:2014/DAmd 1
Gas cylinders — Cylinder valves —Manufacturing tests and examinations —Amendment 1
ISO/DIS15996
Gas cylinders — Residual pressure valves —Specification and type testing of cylindervalves incorporating residual pressure devices(Revision of ISO 15996:2005, ISO15996:2005/Amd 1:2007)
TC 61 PlasticsISO/DIS 5659-2
Plastics — Smoke generation — Part 2:Determination of optical density by a single-chamber test(Revision of ISO 5659-2:2012)
ISO/DIS19209
Classification of thermoplastic wood adhesivesfor non-structural applications
ISO/DIS19210
Adhesives — Thermoplastic wood adhesivesfor non-structural applications —Determination of tensile shear strength of lapjoints
TC 68 Financial servicesISO/DIS 9564-1.2
Financial services — Personal IdentificationNumber (PIN) management and security —Part 1: Basic principles and requirements forPINs in card-based systems
ISO NORMEN / NORMES ISO4
(Revision of ISO 9564-1:2011, ISO 9564-1:2011/Amd 1:2015)
TC 70 Internal combustion enginesISO/DIS 4548-12
Methods of test for full-flow lubricating oil filtersfor internal combustion engines — Part 12:Filtration efficiency using particle counting, andcontaminant retention capacity(Revision of ISO 4548-12:2000)
TC 82 MiningISO/DIS19225
Underground mining machines — Mobileextracting machines at the face — Safetyrequirements for shearer loaders and ploughsystems
TC 107 Metallic and other inorganic coatingsISO/DIS14232-1
Thermal spraying — Powders — Part 1:Characterisation and technical supplyconditions(Revision of ISO 14232:2000)
ISO/DIS19496-1
Vitreous and porcelain enamels - Terminology— Part 1: Terms and definitions
ISO/DIS19496-2
Vitreous and porcelain enamels —Terminology — Part 2: Visual representationsand descriptions
TC 108 Mechanical vibration, shock andcondition monitoring
ISO 20283-3:2006/DAmd1
Mechanical vibration — Measurement ofvibration on ships — Part 3: Pre-installationvibration measurement of shipboardequipment — Amendment 1
ISO/DIS20283-5
Mechanical vibration — Measurement ofvibration on ships — Part 5: Guidelines formeasurement, evaluation and reporting ofvibration with regard to habitability onpassenger and merchant ships(Revision of ISO 6954:2000)
TC 110 Industrial trucksISO/DIS10896-7
Rough-terrain trucks — Safety requirementsand verification — Part 7: Longitudinal loadmoment systems
ISO/DIS20297-1
Industrial trucks — Lorry-mounted trucks —Part 1: Safety requirements and verification
TC 118 Compressors and pneumatic tools,machines and equipment
ISO/DIS18623-1.2
Air compressors and compressed air systems— Air compressors — Part 1: Safetyrequirements
TC 127 Earth-moving machineryISO/DIS 5006 Earth-moving machinery — Operator's field of
view — Test method and performance criteria(Revision of ISO 5006:2006)
ISO/DIS8643.2
Earth-moving machinery — Hydraulicexcavator and backhoe loader lowering controldevice — Requirements and tests(Revision of ISO 8643:1997)
TC 130 Graphic technologyISO/DIS12647-7
Graphic technology — Process control for theproduction of halftone colour separations,
proof and production prints — Part 7: Proofingprocesses working directly from digital data(Revision of ISO 12647-7:2013)
TC 134 Fertilizers and soil conditionersISO/DIS19746
Determination of urea content in urea-basedfertilizers by high performance liquidchromatography (HPLC)
TC 135 Non-destructive testingISO/DIS20669
Non-destructive testing - Pulsed Eddy currenttesting of ferromagnetic material components
TC 138 Plastics pipes, fittings and valves forthe transport of fluids
ISO15493:2003/DAmd 1
Plastics piping systems for industrialapplications — Acrylonitrile-butadiene-styrene(ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C)— Specifications for components and thesystem — Metric series — Amendment 1
ISO/DIS13761
Plastics pipes and fittings — Pressurereduction factors for polyethylene pipelinesystems for use at temperatures above 20degrees C(Revision of ISO 13761:1996)
ISO/DIS10639
Plastics piping systems for pressure and non-pressure water supply — Glass-reinforcedthermosetting plastics (GRP) systems basedon unsaturated polyester (UP) resin(Revision of ISO 10639:2004, ISO10639:2004/Amd 1:2011)
ISO/DIS10928
Plastics piping systems — Glass-reinforcedthermosetting plastics (GRP) pipes and fittings— Methods for regression analysis and theiruse(Revision of ISO 10928:2009, ISO10928:2009/Amd 1:2013)
ISO/DIS16611
Plastics piping systems for drainage andsewerage without pressure — Non-circularpipes and joints made of glass-reinforcedthermosetting plastics (GRP) based onunsaturated polyester resins (UP) —Dimensions, requirements and tests
TC 145 Graphical symbolsISO7010:2011/DAmd 187
Graphical symbols — Safety colours andsafety signs — Registered safety signs —Amendment 187: Safety sign W041: Warning;Asphyxiating atmosphere
TC 146 Air qualityISO/DIS18466
Stationary source emissions — Determinationof the biogenic fraction in CO2 in stack gasusing the balance method
TC 147 Water qualityISO 9308-1:2014/DAmd1
Water quality — Enumeration of Escherichiacoli and coliform bacteria — Part 1: Membranefiltration method for waters with low bacterialbackground flora — Amendment 1
ISO/DIS 5667-12
Water quality — Sampling — Part 12:Guidance on sampling of bottom sediments(Revision of ISO 5667-12:1995)
ISO NORMEN / NORMES ISO5
ISO/DIS 5667-16
Water quality — Sampling — Part 16:Guidance on biotesting of samples(Revision of ISO 5667-16:1998)
TC 153 ValvesISO/DIS 5210 Industrial valves — Multi-turn valve actuator
attachments(Revision of ISO 5210:1991)
ISO/DIS 5211 Industrial valves — Part-turn actuatorattachments(Revision of ISO 5211:2001)
TC 156 Corrosion of metals and alloysISO/DIS 3651-3
Determination of resistance to intergranularcorrosion of stainless steels — Part 3: Low-Crferritic stainless steels — Corrosion test inmedia containing sulfuric acid
TC 159 ErgonomicsISO/DIS 9241-940.2
Ergonomics of human-computer interaction —Part 940: Evaluation of tactile and hapticinteractions
TC 163 Thermal performance and energy usein the built environment
ISO/DIS12569
Thermal performance of buildings andmaterials — Determination of specific airflowrate in buildings — Tracer gas dilution method(Revision of ISO 12569:2012)
ISO/DIS19467
Thermal performance of windows and doors —Determination of solar heat gain coefficientusing solar simulator
TC 165 Timber structuresISO/DIS19323
Timber structures — Joist hangers — Testmethods
TC 172 Optics and photonicsISO/DIS 9344 Microscopes — Graticules for eyepieces
(Revision of ISO 9344:2011)
TC 178 Lifts, escalators and moving walksISO/DIS22201-1
Lifts (elevators), escalators and moving walks -Programmable electronic systems in safetyrelated applications — Part 1: Lifts (elevators)(PESSRAL)(Revision of ISO 22201:2009, ISO22201:2009/Cor 1:2011)
ISO/DIS22201-2
Lifts (elevators), escalators and moving walks— Programmable electronic systems in safetyrelated applications — Part 2: Escalators andmoving walks (PESSRAE)(Revision of ISO 22201-2:2013)
TC 184 Automation systems and integrationISO/DIS 8000-61
Data quality — Part 61: Information & dataquality management process reference model
TC 190 Soil qualityISO/DIS18400-202
Soil quality — Sampling — Part 202:Preliminary investigations
TC 204 Intelligent transport systemsISO/DIS13140-1
Electronic fee collection — Evaluation of on-board and roadside equipment for conformityto ISO 13141 — Part 1: Test suite structureand test purposes
(Revision of ISO/TS 13140-1:2011)
ISO/DIS13143-1
Electronic fee collection — Evaluation of on-board and roadside equipment for conformityto ISO 12813 — Part 1: Test suite structureand test purposes(Revision of ISO/TS 13143-1:2011)
ISO/DIS14827-3
Transport Information and control systems —Data interfaces betweencentres for transport information and controlsystems — Part 3: Data interfaces betweencentres for Intelligent Transport Sytems (ITS)using XML
TC 206 Fine ceramicsISO/DIS14705
Fine ceramics (advanced ceramics, advancedtechnical ceramics) — Test method forhardness of monolithic ceramics at roomtemperature(Revision of ISO 14705:2008)
TC 216 FootwearISO/DIS18454
Footwear — Standard atmospheres forconditioning and testing of footwear andcomponents for footwear(Revision of ISO 18454:2001)
ISO/DIS18896
Footwear — Test methods for shanks —Longitudinal stiffness(Revision of ISO 18896:2006)
ISO/DIS20866
Footwear — Test methods for insoles —Delamination resistance(Revision of ISO 20866:2001)
ISO/DIS20867
Footwear — Test methods for insoles — Heelpin holding strength(Revision of ISO 20867:2001)
ISO/DIS20870
Footwear — Ageing conditioning
(Revision of ISO 20870:2001)
ISO/DIS20871
Footwear — Test methods for outsoles —Abrasion resistance(Revision of ISO 20871:2001)
ISO/DIS20872
Footwear — Test methods for outsoles —Tear strength(Revision of ISO 20872:2001)
ISO/DIS20873
Footwear — Test methods for outsoles —Dimensional stability(Revision of ISO 20873:2001)
ISO/DIS20874
Footwear — Test methods for outsoles —Needle tear strength(Revision of ISO 20874:2001)
ISO/DIS20875
Footwear — Test methods for outsoles —Determination of split tear strength anddelamination resistance(Revision of ISO 20875:2001)
ISO/DIS20876
Footwear — Test methods for insoles —Resistance to stitch tear(Revision of ISO 20876:2001)
ISO/DIS22650
Footwear — Test methods for whole shoe —Heel attachment
ISO NORMEN / NORMES ISO6
(Revision of ISO 22650:2002)
TC 217 CosmeticsISO/DIS16128-2.2
Cosmetics — Guidelines on technicaldefinitions and criteria for natural & organiccosmetic ingredients — Part 2: Criteria foringredients and products
TC 219 Floor coveringsISO/DIS20251
Textile floor coverings — Water impermeabilitytest
TC 238 Solid biofuelsISO/DIS17225-8
Solid biofuels — Fuel specifications andclasses — Part 8: Graded thermally treatedand densified biomass fuels
ISO/DIS18135
Solid Biofuels — Sampling
TC 242 Energy ManagementISO/DIS50007
Activities relating to energy services —Guidelines for the assessment andimprovement of the service to users
TC 261 Additive manufacturingISO/ASTMDIS 52903-1
Additive Manufacturing — StandardSpecification for Material Extrusion BasedAdditive Manufacturing of Plastic Materials —Part 1: Feedstock materials
TC 299 Robots and robotic devicesISO/DIS19649
Robots and robotic devices — Vocabulary formobile robots
JTC 1 Information technologyISO/IEC DIS17826
Information technology — Cloud DataManagement Interface (CDMI)(Revision of ISO/IEC 17826:2012)
ISO/IEC DIS19514
Information technology — Object managementgroup systems modeling language (OMGSysML)
ISO/IEC DIS10118-1.2
Information technology — Security techniques— Hash-functions — Part 1: General(Revision of ISO/IEC 10118-1:2000)
ISO/IEC DIS17922
Information technology — Security techniques— Telebiometric authentication frameworkusing biometric hardware security module
ISO/IEC DIS19592-1
Information technology — Security techniques— Secret Sharing — Part 1: General
ISO/IEC DIS27034-6.2
Information technology — Security techniques— Application security — Part 6: Case studies
ISO/IEC DIS27036-4
Information technology — Security techniques— Information security for supplierrelationships — Part 4: Guidelines for securityof cloud services
ISO/IEC DIS27050-1
Information technology — Security techniques— Electronic discovery — Part 1: Overviewand concepts
ISO/IEC14496-5:2001/DAmd40
Information technology — Coding of audio-visual objects — Part 5: Reference software —Amendment 40: Printing material and 3Dgraphics coding for browsers referencesoftware
ISO/IEC14496-
Information technology — Coding of audio-visual objects — Part 16: Animation
16:2011/DAmd 3
Framework eXtension (AFX) — Amendment 3:Printing material and 3D graphics coding forbrowsers
ISO/IEC14496-22:2015/DAmd 1
Information technology — Coding of audio-visual objects — Part 22: Open Font Format —Amendment 1: Updates for font collectionsfunctionality
ISO/IEC23000-15/DAmd 1
Information technology — Multimediaapplication format (MPEG-A) — Part 15:Multimedia preservation application —Amendment 1: Implementation Guideline forMP-AF
ISO/IEC23003-1:2007/DAmd3
Information technology — MPEG audiotechnologies — Part 1: MPEG Surround —Amendment 3: MPEG Surround extension for3D Audio
ISO/IEC23003-2:2010/DAmd5
Information technology — MPEG audiotechnologies — Part 2: Spatial Audio ObjectCoding (SAOC) — Amendment 5: SAOCReference Software
ISO/IEC DIS23005-7
Information technology — Media context andcontrol — Part 7: Conformance and referencesoftware(Revision of ISO/IEC 23005-7:2014)
ISO/IEC23008-3:2015/DAmd3
Information technology — High efficiencycoding and media delivery in heterogeneousenvironments — Part 3: 3D audio —Amendment 3: MPEG-H 3D Audio Phase 2
ISO/IEC23008-3:2015/DAmd4
Information technology — High efficiencycoding and media delivery in heterogeneousenvironments — Part 3: 3D audio —Amendment 4: Carriage of system data
ISO/IEC DIS23009-5
Information technology — Dynamic adaptivestreaming over HTTP (DASH) — Part 5:Server and network assisted DASH (SAND)
ISO/IEC 9541-1:2012/DAmd1
Information technology — Font informationinterchange — Part 1: Architecture —Amendment 1
ISO/IEC DIS19086-1
Information technology — Cloud computing —Service level agreement (SLA) framework —Part 1: Overview and concepts
PROJETS FINALSPériode du 1er janvier 2016 au 31 janvier 2016.*Actuellement disponible en anglais seulement.
TC 8 Ships and marine technologyISO/FDIS 15364 Ships and marine technology —
Pressure/vacuum valves for cargo tanks(Revision of ISO 15364:2007)
TC 17 SteelISO/FDIS 4955 Heat-resistant steels
(Revision of ISO 4955:2005)
ISO/FDIS 6931-1 Stainless steels for springs — Part 1: Wire(Revision of ISO 6931-1:1994)
ISO NORMEN / NORMES ISO7
ISO/FDIS 17745 Steel wire ring net panels — Definitions andspecifications
ISO/FDIS 17746 Steel wire rope net panels and rolls —Definitions and specifications
TC 21 Equipment for fire protection and firefighting
ISO/FDIS 7240-24 Fire detection and fire alarm systems — Part24: Fire alarm loudspeakers(Revision of ISO 7240-24:2010, ISO 7240-24:2010/Amd 1:2013)
TC 22 Road vehiclesISO/FDIS 7637-3 Road vehicles — Electrical disturbances from
conduction and coupling — Part 3: Electricaltransient transmission by capacitive andinductive coupling via lines other than supplylines(Revision of ISO 7637-3:2007)
TC 34 Food productsISO/FDIS 662 Animal and vegetable fats and oils —
Determination of moisture and volatile mattercontent(Revision of ISO 662:1998)
TC 36 CinematographyISO/FDIS 21727 Cinematography — Method of measurement
of perceived loudness of short durationmotion-picture audio material(Revision of ISO 21727:2004)
TC 38 TextilesISO/FDIS 105-D02 Textiles — Tests for colour fastness — Part
D02: Colour fastness to rubbing: Organicsolvents(Revision of ISO 105-D02:1993)
ISO/FDIS 105-X12 Textiles — Tests for colour fastness — PartX12: Colour fastness to rubbing(Revision of ISO 105-X12:2001)
ISO/FDIS 105-X16 Textiles — Tests for colour fastness — PartX16: Colour fastness to rubbing — Smallareas(Revision of ISO 105-X16:2001)
TC 43 AcousticsISO/FDIS 16254 Acoustics — Measurement of sound emitted
by road vehicles of category M and Nstandstill and low speed operation —Engineering method
TC 44 Welding and allied processesISO/FDIS 3581 Welding consumables — Covered electrodes
for manual metal arc welding of stainless andheat-resisting steels — Classification(Revision of ISO 3581:2003, ISO3581:2003/Cor 1:2008, ISO 3581:2003/Amd1:2011)
ISO/FDIS 17777 Welding consumables — Covered electrodesfor manual metal arc welding of copper andcopper alloys — Classification
ISO/FDIS 19288 Welding consumables — Solid wireelectrodes, solid wires and rods for fusion
welding of magnesium and magnesium alloys— Classification
ISO/FDIS 15012-4 Health and safety in welding and alliedprocesses — Equipment for capture andseparation of welding fume — Part 4: Generalrequirements
TC 61 PlasticsISO/FDIS 4892-1 Plastics — Methods of exposure to laboratory
light sources — Part 1: General guidance(Revision of ISO 4892-1:1999)
TC 94 Personal safety -- Protective clothingand equipment
ISO/FDIS 16900-12.2
Respiratory protective devices — Methods oftest and test equipment — Part 12:Determination of volume-averaged work ofbreathing and peak respiratory pressures
TC 106 DentistryISO/FDIS 2157 Dentistry — Nominal diameters and
designation code numbers for rotaryinstruments(Revision of ISO 2157:1992)
ISO/FDIS 7787-1 Dentistry — Laboratory cutters — Part 1:Steel laboratory cutters(Revision of ISO 7787-1:1984)
TC 130 Graphic technologyISO/FDIS 12641-1 Graphic technology — Prepress digital data
exchange — Colour targets for input scannercalibration — Part 1: Colour targets for inputscanner calibration(Revision of ISO 12641:1997)
TC 134 Fertilizers and soil conditionersISO/FDIS 15959 Fertilizers — Determination of extracted
phosphorusISO/FDIS 15960 Fertilizers — Extraction of total calcium, total
magnesium, total sodium and total sulfur inthe forms of sulfates
TC 135 Non-destructive testingISO/FDIS 18081 Non-destructive testing — Acoustic emission
testing (AT) — Leak detection by means ofacoustic emission
TC 147 Water qualityISO/FDIS 7027-1 Water quality — Determination of turbidity —
Part 1: Quantitative methods(Revision of ISO 7027:1999)
ISO/FDIS 5667-4 Water quality — Sampling — Part 4:Guidance on sampling from lakes, naturaland man-made(Revision of ISO 5667-4:1987)
TC 164 Mechanical testing of metalsISO/FDIS 6892-1 Metallic materials — Tensile testing — Part 1:
Method of test at room temperature(Revision of ISO 6892-1:2009)
TC 190 Soil qualityISO/FDIS 18187 Soil quality — Contact test for solid samples
using the dehydrogenase activity ofArthrobacter globiformis
ISO NORMEN / NORMES ISO8
ISO/FDIS 18763 Soil quality — Determination of the toxiceffects of pollutants on germination and earlygrowth of higher plants
TC 199 Safety of machineryISO/FDIS 14122-1 Safety of machinery — Permanent means of
access to machinery — Part 1: Choice offixed means and general requirements ofaccess(Revision of ISO 14122-1:2001, ISO 14122-1:2001/Amd 1:2010)
ISO/FDIS 14122-2 Safety of machinery — Permanent means ofaccess to machinery — Part 2: Workingplatforms and walkways(Revision of ISO 14122-2:2001, ISO 14122-2:2001/Amd 1:2010)
ISO/FDIS 14122-3 Safety of machinery — Permanent means ofaccess to machinery — Part 3: Stairs,stepladders and guard-rails(Revision of ISO 14122-3:2001, ISO 14122-3:2001/Amd 1:2010)
ISO/FDIS 14122-4 Safety of machinery — Permanent means ofaccess to machinery — Part 4: Fixed ladders(Revision of ISO 14122-4:2004, ISO 14122-4:2004/Amd 1:2010)
TC 204 Intelligent transport systemsISO/FDIS 13184-2 Intelligent transport systems (ITS) —
Guidance protocol via personal ITS station foradvisory safety systems — Part 2: Roadguidance protocol (RGP) requirements andspecification
TC 210 Quality management andcorresponding general aspects formedical devices
IEC/FDIS 80369-5 Small-bore connectors for liquids and gasesin healthcare applications — Part 5:Connectors for limb cuff inflation applications
TC 215 Health informaticsISO/FDIS 17523 Health informatics — Requirements for
electronic prescriptionsTC 216 FootwearISO/FDIS 10734 Footwear — Test method for slide fasteners
— Strength of slide fastener pullersISO/FDIS 10751 Footwear — Test methods for slide fasteners
— Resistance to repeated opening andclosing
ISO/FDIS 10764 Footwear — Test methods for slide fasteners— Lateral strength
ISO/FDIS 17694 Footwear — Test methods for uppers andlining — Flex resistance(Revision of ISO 17694:2003)
ISO/FDIS 17697 Footwear — Test methods for uppers, liningand insocks — Seam strength(Revision of ISO 17697:2003)
ISO/FDIS 17698 Footwear — Test methods for uppers —Delamination resistance(Revision of ISO 17698:2003)
ISO/FDIS 17701 Footwear — Test methods for uppers, liningand insocks — Colour migration
(Revision of ISO 17701:2003)
ISO/FDIS 18403 Footwear — Test methods for slide fasteners— Resistance to damage during closureunder a lateral force
ISO/FDIS 22649 Footwear — Test methods for insoles andinsocks — Water absorption and desorption(Revision of ISO 22649:2003)
TC 220 Cryogenic vesselsISO/FDIS 21013-3 Cryogenic vessels — Pressure-relief
accessories for cryogenic service — Part 3:Sizing and capacity determination(Revision of ISO 21013-3:2006)
TC 238 Solid biofuelsISO/FDIS 17827-2 Solid biofuels — Determination of particle
size distribution for uncompressed fuels —Part 2: Vibrating screen method using sieveswith aperture of 3,15 mm and below
JTC 1 Information technologyISO/IEC10646:2014/FDAmd 2
Information technology — Universal CodedCharacter Set (UCS) — Amendment 2:Bhaiksuki, Marchen, Tangut, and othercharacters
ISO/IEC FDIS25022
Systems and software engineering —Systems and software quality requirementsand evaluation (SQuaRE) — Measurement ofquality in use(Revision of ISO/IEC TR 9126-4:2004)
ISO/IEC FDIS25023
Systems and software engineering —Systems and software Quality Requirementsand Evaluation (SQuaRE) — Measurement ofsystem and software product quality(Revision of ISO/IEC TR 9126-2:2003,ISO/IEC TR 9126-3:2003)
ISO/IEC FDIS26551.2
Software and systems engineering — Toolsand methods for product line requirementsengineering(Revision of ISO/IEC 26551:2012)
ISO/IEC FDIS14443-3
Identification cards — Contactless integratedcircuit cards — Proximity cards — Part 3:Initialization and anticollision(Revision of ISO/IEC 14443-3:2011, ISO/IEC14443-3:2011/Amd 1:2011, ISO/IEC 14443-3:2011/Amd 2:2012, ISO/IEC 14443-3:2011/Amd 6:2014, ISO/IEC 14443-3:2011/Amd 3:2014, ISO/IEC 14443-3:2011/DAmd 4.2)
ISO/IEC FDIS14443-4
Identification cards — Contactless integratedcircuit cards — Proximity cards — Part 4:Transmission protocol(Revision of ISO/IEC 14443-4:2008, ISO/IEC14443-4:2008/Amd 1:2012, ISO/IEC 14443-4:2008/Amd 2:2012, ISO/IEC 14443-4:2008/Amd 3:2013, ISO/IEC 14443-4:2008/Amd 4:2014, ISO/IEC 14443-4:2008/DAmd 5.2)
ISO/IEC FDIS15946-1
Information technology — Securitytechniques — Cryptographic techniquesbased on elliptic curves — Part 1: General
ISO NORMEN / NORMES ISO9
(Revision of ISO/IEC 15946-1:2008, ISO/IEC15946-1:2008/Cor 1:2009)
ISO/IEC FDIS29146
Information technology — Securitytechniques — A framework for accessmanagement
ISO/IEC FDIS23001-9
Information technology — MPEG systemstechnologies — Part 9: Common encryptionof MPEG-2 transport streams(Revision of ISO/IEC 23001-9:2014, ISO/IEC23001-9:2014/DAmd 1)
ISO/IEC FDIS23005-3
Information technology — Media context andcontrol — Part 3: Sensory information(Revision of ISO/IEC 23005-3:2013, ISO/IEC23005-3:2013/Cor 1:2013)
ISO/IEC FDIS30134-2
Information technology — Data centres —Key performance indicators — Part 2: Powerusage effectiveness (PUE)
ISO/IEC FDIS30134-3
Information technology — Data centres —Key performance indicators — Part 3:Renewable energy factor (REF)
NORMES PUBLIEESNouvelles Normes internationales publiées entre le 1er
janvier 2016 et le 31 janvier 2016.*Actuellement disponible en anglais seulement.** Version française de la norme publiée précédemment enanglais seulement
REMCO Committee on reference materialsISO Guide31:2015
Reference materials — Contents of certificates,labels and accompanying documentation
TC 6 Paper, board and pulpsISO/TR10688:2015
Paper, board and pulps — Basic terms andequations for optical properties
ISO 11093-5:2016
Paper and board — Testing of cores — Part 5:Determination of characteristics of concentricrotation
TC 17 SteelISO 4939:2016 Steel — Determination of nickel —
Dimethylglyoxime spectrophotometric methodISO 17577:2016 Steel — Ultrasonic testing of steel flat products of
thickness equal to or greater than 6 mmTC 20 Aircraft and space vehiclesISO 9667:2016 Aircraft ground support equipment — Tow barsISO 19281:2016 Air cargo — Fire resistant containers — Design,
performance and testing requirementsTC 22 Road vehiclesISO 23013:2016 Road vehicles — Determination of resistance to
forced entry of security glass constructions usedin vehicle glazing — Test of glazing systems
ISO 12617:2015 Road vehicles — Liquefied natural gas (LNG)refuelling connector — 3,1 MPa connector
TC 23 Tractors and machinery for agricultureand forestry
ISO11450:1999/Amd1:2016
Equipment for harvesting and conservation —Round balers — Terminology and commercialspecifications — Amendment 1
ISO11850:2011/Amd1:2016
Machinery for forestry — General safetyrequirements — Amendment 1
TC 28 Petroleum products and related productsof synthetic or biological origin
ISO/TS17306:2016
Petroleum products — Biodiesel — Determinationof free and total glycerin and mono-, di- andtracylglycerols by gas chromatography
ISO/TS17307:2016
Petroleum products — Biodiesel — Determinationof total esters content by gas chromatography
TC 29 Small toolsISO 7388-3:2016 Tool shanks with 7/24 taper for automatic tool
changers — Part 3: Retention knobs of forms AD,AF, UD, UF, JD and JF
ISO 21538:2016 Blanks for superabrasive cutting-off wheels —Mounting and fixing bores — Buildingconstruction and civil engineering
TC 31 Tyres, rims and valvesISO 17464:2016 Pneumatic tubes for automotive vehicles —
Technical requirements and test methodsTC 34 Food productsISO29841:2009/Amd1:2016
Vegetable fats and oils — Determination of thedegradation products of chlorophylls a and a'(pheophytins a, a' and pyropheophytins) —Amendment 1
TC 35 Paints and varnishesISO 4628-1:2016 Paints and varnishes — Evaluation of
degradation of coatings — Designation ofquantity and size of defects, and of intensity ofuniform changes in appearance — Part 1:General introduction and designation system
ISO 4628-2:2016 Paints and varnishes — Evaluation ofdegradation of coatings — Designation ofquantity and size of defects, and of intensity ofuniform changes in appearance — Part 2:Assessment of degree of blistering
ISO 4628-3:2016 Paints and varnishes — Evaluation ofdegradation of coatings — Designation ofquantity and size of defects, and of intensity ofuniform changes in appearance — Part 3:Assessment of degree of rusting
ISO 4628-4:2016 Paints and varnishes — Evaluation ofdegradation of coatings — Designation ofquantity and size of defects, and of intensity ofuniform changes in appearance — Part 4:Assessment of degree of cracking
ISO 4628-5:2016 Paints and varnishes — Evaluation ofdegradation of coatings — Designation ofquantity and size of defects, and of intensity ofuniform changes in appearance — Part 5:Assessment of degree of flaking
ISO 4628-7:2016 Paints and varnishes — Evaluation ofdegradation of coatings — Designation ofquantity and size of defects, and of intensity ofuniform changes in appearance — Part 7:Assessment of degree of chalking by velvetmethod
ISO 4628-10:2016
Paints and varnishes — Evaluation ofdegradation of coatings — Designation of
ISO NORMEN / NORMES ISO10
quantity and size of defects, and of intensity ofuniform changes in appearance — Part 10:Assessment of degree of filiform corrosion
TC 38 TextilesISO 17881-1:2016
Textiles — Determination of certain flameretardants — Part 1: Brominated flame retardants
ISO 17881-2:2016
Textiles — Determination of certain flameretardants — Part 2: Phosphorus flameretardants
TC 43 AcousticsISO 389-3:2016 Acoustics — Reference zero for the calibration of
audiometric equipment — Part 3: Referenceequivalent threshold vibratory force levels forpure tones and bone vibrators
ISO 6926:2016 Acoustics — Requirements for the performanceand calibration of reference sound sources usedfor the determination of sound power levels
TC 44 Welding and allied processesISO 9015-2:2016 Destructive tests on welds in metallic materials —
Hardness testing — Part 2: Microhardness testingof welded joints
ISO 8430-1:2016 Resistance spot welding — Electrode holders —Part 1: Taper fixing 1:10
ISO 8430-2:2016 Resistance spot welding — Electrode holders —Part 2: Morse taper fixing
ISO 8430-3:2016 Resistance spot welding — Electrode holders —Part 3: Parallel shank fixing for end thrust
ISO 18278-2:2016
Resistance welding — Weldability — Part 2:Evaluation procedures for weldability in spotwelding
TC 45 Rubber and rubber productsISO 5774:2016 Plastics hoses — Textile-reinforced types for
compressed-air applications — SpecificationISO 13363:2016 Rubber and plastics hoses for marine-engine wet-
exhaust systems — SpecificationISO 19013-2:2016
Rubber hoses and tubing for fuel circuits forinternal combustion engines — Specification —Part 2: Gasoline fuels
ISO 4665:2016 Rubber, vulcanized or thermoplastic —Resistance to weathering
ISO 6502:2016 Rubber — Guide to the use of curemetersISO 11235:2016 Rubber compounding ingredients — Sulfenamide
accelerators — Test methodsTC 48 Laboratory equipmentISO 4796-1:2016 Laboratory glassware — Bottles — Part 1: Screw-
neck bottlesISO 16496:2016 Laboratory glassware — Vacuum-jacketed
vessels for heat insulationTC 59 Buildings and civil engineering worksISO 19863:2016 Buildings and civil engineering works — Sealants
— Determination of tear resistanceTC 61 PlasticsISO/TS19022:2016
Plastics — Method of controlled acceleration oflaboratory weathering by increased irradiance
ISO 30012:2016 Carbon-fibre-reinforced plastics — Determinationof the size and aspect ratio of crushed objects
TC 67 Materials, equipment and offshorestructures for petroleum, petrochemicaland natural gas industries
ISO 19905-1:2016
Petroleum and natural gas industries — Site-specific assessment of mobile offshore units —Part 1: Jack-ups
TC 85 Nuclear energy, nuclear technologies,and radiological protection
ISO 7503-1:2016 Measurement of radioactivity — Measurementand evaluation of surface contamination — Part1: General principles
ISO 7503-2:2016 Measurement of radioactivity - Measurement andevaluation of surface contamination — Part 2:Test method using wipe-test samples
ISO 7503-3:2016 Measurement of radioactivity — Measurementand evaluation of surface contamination — Part3: Apparatus calibration
ISO 8769:2016 Reference sources — Calibration of surfacecontamination monitors — Alpha-, beta- andphoton emitters
TC 89 Wood-based panelsISO 12460-4:2016
Wood-based panels — Determination offormaldehyde release — Part 4: Desiccatormethod
ISO 16895:2016 Wood-based panels — Dry-process fibreboardISO 16893:2016 Wood-based panels — ParticleboardTC 94 Personal safety -- Protective clothing
and equipmentISO 11999-9:2016
PPE for firefighters — Test methods andrequirements for PPE used by firefighters whoare at risk of exposure to high levels of heatand/or flame while fighting fires occurring instructures — Part 9: Fire hoods
TC 102 Iron ore and direct reduced ironISO 15968:2016 Direct reduced iron — Determination of apparent
density and water absorption of hot briquettediron (HBI)
TC 106 DentistryISO 15912:2016 Dentistry — Refractory investment and die
materialISO 22674:2016 Dentistry — Metallic materials for fixed and
removable restorations and appliancesISO 18397:2016 Dentistry — Powered scalerTC 107 Metallic and other inorganic coatingsISO 28706-4:2016
Vitreous and porcelain enamels — Determinationof resistance to chemical corrosion — Part 4:Determination of resistance to chemical corrosionby alkaline liquids using a cylindrical vessel
ISO 28765:2016 Vitreous and porcelain enamels — Design ofbolted steel tanks for the storage or treatment ofwater or municipal or industrial effluents andsludges
ISO 17668:2016 Zinc diffusion coatings on ferrous products —Sherardizing — Specification
TC 108 Mechanical vibration, shock andcondition monitoring
ISO 13373-2:2016
Condition monitoring and diagnostics of machines— Vibration condition monitoring — Part 2:
ISO NORMEN / NORMES ISO11
Processing, analysis and presentation of vibrationdata
TC 110 Industrial trucksISO 3691-2:2016 Industrial trucks — Safety requirements and
verification — Part 2: Self-propelled variable-reach trucks
ISO 22915-1:2016
Industrial trucks — Verification of stability — Part1: General
TC 113 HydrometryISO 24155:2016 Hydrometry — Hydrometric data transmission
systems — Specification of system requirementsTC 122 PackagingISO/TS 19709-2:2016
Transport packaging — Small load containersystems — Part 2: Column Stackable System(CSS)
TC 138 Plastics pipes, fittings and valves for thetransport of fluids
ISO 9967:2016 Thermoplastics pipes — Determination of creepratio
ISO 9969:2016 Thermoplastics pipes — Determination of ringstiffness
ISO 8513:2016 Plastics piping systems — Glass-reinforcedthermosetting plastics (GRP) pipes — Testmethods for the determination of the initiallongitudinal tensile strength
TC 142 Cleaning equipment for air and othergases
ISO 16891:2016 Test methods for evaluating degradation ofcharacteristics of cleanable filter media
TC 155 Nickel and nickel alloysISO/TS18223:2015
Nickel alloys — Determination of Nickel content— Inductively coupled plasma atomic emissionspectrometric method
TC 163 Thermal performance and energy use inthe built environment
ISO15148:2002/Amd1:2016
Hygrothermal performance of building materialsand products — Determination of waterabsorption coefficient by partial immersion —Amendment 1
TC 164 Mechanical testing of metalsISO 7438:2016 Metallic materials — Bend testTC 173 Assistive products for persons with
disabilityISO 17966:2016 Assistive products for personal hygiene that
support users — Requirements and test methodsISO 19027:2016 Design principles for communication support
board using pictorial symbolsISO 19029:2016 Accessible design — Auditory guiding signals in
public facilitiesTC 174 JewelleryISO 8653:2016 Jewellery — Ring-sizes — Definition,
measurement and designationTC 190 Soil qualityISO 17601:2016 Soil quality — Estimation of abundance of
selected microbial gene sequences byquantitative PCR from DNA directly extractedfrom soil
ISO 18311:2016 Soil quality — Method for testing effects of soilcontaminants on the feeding activity of soildwelling organisms — Bait-lamina test
TC 198 Sterilization of health care productsISO 18362:2016 Manufacture of cell-based health care products
— Control of microbial risks during processingTC 204 Intelligent transport systemsISO 17438-1:2016
Intelligent transport systems — Indoor navigationfor personal and vehicle ITS station — Part 1:General information and use case definition
ISO 17575-1:2016
Electronic fee collection — Application interfacedefinition for autonomous systems — Part 1:Charging
ISO 17575-2:2016
Electronic fee collection — Application interfacedefinition for autonomous systems — Part 2:Communication and connection to the lowerlayers
ISO 17575-3:2016
Electronic fee collection — Application interfacedefinition for autonomous systems — Part 3:Context data
TC 211 Geographic information/GeomaticsISO 19119:2016 Geographic information — ServicesISO/TS 19163-1:2016
Geographic information — Content componentsand encoding rules for imagery and gridded data— Part 1: Content model
TC 238 Solid biofuelsISO 18134-1:2015
Solid biofuels — Determination of moisturecontent — Oven dry method — Part 1: Totalmoisture — Reference method
TC 272 Forensic sciencesISO 18385:2016 Minimizing the risk of human DNA contamination
in products used to collect, store and analyzebiological material for forensic purposes —Requirements
JTC 1 Information technologyISO/IEC 25185-1:2016
Identification cards — Integrated circuit cardauthentication protocols — Part 1: Protocol forLightweight Authentication of Identity
ISO/IEC/IEEE8802-1AX:2016
Information technology — Telecommunicationsand information exchange between systems —Local and metropolitan area networks — Specificrequirements — Part 1AX: Link aggregation
ISO/IEC 15149-3:2016
Information technology — Telecommunicationsand information exchange between systems —Magnetic field area network (MFAN) — Part 3:Relay Protocol for Extended Range
ISO/IEC 15149-4:2016
Information technology — Telecommunicationsand information exchange between systems —Magnetic field area network (MFAN) — Part 4:Security Protocol for Authentication
ISO/IEC TR29110-5-6-2:2014
Systems and software engineering — Lifecycleprofiles for Very Small Entities (VSEs) — Part 5-6-2: Systems engineering — Management andengineering guide: Generic profile group: Basicprofile
ISO/IEC30130:2016
Software engineering — Capabilities of softwaretesting tools
ISO NORMEN / NORMES ISO12
ISO/IEC8652:2012/Cor1:2016
Information technology — Programminglanguages — Ada — Technical Corrigendum 1
ISO/IEC TS19571:2016
Programming Languages — Technicalspecification for C++ extensions for concurrency
ISO/IEC17825:2016
Information technology — Security techniques —Testing methods for the mitigation of non-invasiveattack classes against cryptographic modules
ISO/IEC 29192-4:2013/Amd1:2016
Information technology — Security techniques —Lightweight cryptography — Part 4: Mechanismsusing asymmetric techniques — Amendment 1
ISO/IEC 18477-6:2016
Information technology — Scalable compressionand coding of continuous-tone still images — Part6: IDR Integer Coding
ISO/IEC 18477-7:2016
Information technology — Scalable compressionand coding of continuous-tone still images — Part7: HDR Floating-Point Coding
ISO/IEC 13249-3:2016
Information technology — Database languages— SQL multimedia and application packages —Part 3: Spatial
ISO/IEC 19757-3:2016
Information technology — Document SchemaDefinition Languages (DSDL) — Part 3: Rule-based validation — Schematron
ISO/IEC TR13066-2:2016
Information technology — Interoperability withassistive technology (AT) — Part 2: Windowsaccessibility application programming interface(API)
ISO/IEC TR15440:2016
Information technology — Future keyboards andother input devices and entry methods
ISO/IEC 29794-1:2016
Information technology — Biometric samplequality — Part 1: Framework
ISO/IEC 30107-1:2016
Information technology — Biometric presentationattack detection — Part 1: Framework
NORMES CONFIRMEESLes Normes internationales suivantes sont confirmées pourcinq ans:
TC 8 Ships and marine technologyISO 30003:2009
TC 17 SteelISO 642:1999 (reconfirmed)ISO 643:2012
ISO 3651-1:1998 (reconfirmed)ISO 3651-2:1998 (reconfirmed)ISO 4968:1979 (reconfirmed)ISO 5949:1983 (reconfirmed)ISO 9042:1988 (reconfirmed)ISO 7900:2006 (reconfirmed)ISO 7989-1:2006 (reconfirmed)ISO 23717:2006 (reconfirmed)TC 20 Aircraft and space vehiclesISO 12273:2010
ISO 12573:2010
TC 22 Road vehicles
ISO 15031-2:2010TC 24 Particle characterization including
sievingISO 9277:2010
TC 29 Small toolsISO 9270-1:2010
ISO 9270-2:2010
TC 34 Food productsISO 26642:2010
ISO/TS22113:2012ISO 663:2007 (reconfirmed)ISO 3960:2007 (reconfirmed)ISO 6320:2000 (reconfirmed)ISO 6883:2007 (reconfirmed)ISO 8534:2008 (reconfirmed)ISO 15774:2000 (reconfirmed)TC 44 Welding and allied processesISO 6520-1:2007 (reconfirmed)TC 46 Information and documentationISO 8777:1993 (reconfirmed)ISO 12083:1994 (reconfirmed)ISO 9230:2007 (reconfirmed)TC 59 Buildings and civil engineering worksISO 8394-1:2010
ISO/TS12911:2012TC 67 Materials, equipment and offshore
structures for petroleum,petrochemical and natural gasindustries
ISO 13879:1999 (reconfirmed)ISO 13880:1999 (reconfirmed)TC 71 Concrete, reinforced concrete and pre-
stressed concreteISO 1920-10:2010TC 76 Transfusion, infusion and injection,
and blood processing equipment formedical and pharmaceutical use
ISO 8362-6:2010
ISO 15375:2010
TC 79 Light metals and their alloysISO 209:2007 (reconfirmed)TC 85 Nuclear energy, nuclear technologies,
and radiological protectionISO 28218:2010
TC 94 Personal safety -- Protective clothingand equipment
ISO 13996:1999 (reconfirmed)ISO 13999-1:1999
(reconfirmed)
TC 104 Freight containersISO 1496-4:1991 (reconfirmed)
ISO NORMEN / NORMES ISO13
ISO 10368:2006 (reconfirmed)TC 106 DentistryISO 11953:2010
TC 108 Mechanical vibration, shock andcondition monitoring
ISO 4866:2010
ISO 8608:1995 (reconfirmed)ISO 10816-6:1995
(reconfirmed)
ISO 14839-3:2006
(reconfirmed)
ISO 5344:2004 (reconfirmed)ISO 15261:2004 (reconfirmed)TC 113 HydrometryISO 9195:1992 (reconfirmed)TC 114 HorologyISO 3160-1:1998 (reconfirmed)TC 121 Anaesthetic and respiratory equipmentISO 5362:2006 (reconfirmed)TC 126 Tobacco and tobacco productsISO 2817:1999 (reconfirmed)TC 132 FerroalloysISO 4139:1979 (reconfirmed)ISO 4140:1979 (reconfirmed)ISO 7087:1984 (reconfirmed)ISO 7692:1983 (reconfirmed)ISO 7693:1984 (reconfirmed)ISO 10386:1994 (reconfirmed)ISO 10387:1994 (reconfirmed)TC 135 Non-destructive testingISO 3058:1998 (reconfirmed)TC 136 FurnitureISO 21016:2007 (reconfirmed)TC 146 Air qualityISO 17713-1:2007
(reconfirmed)
ISO 17714:2007 (reconfirmed)TC 147 Water qualityISO 11349:2010
ISO 19250:2010
ISO 21338:2010
TC 150 Implants for surgeryISO 5832-9:2007 (reconfirmed)ISO 5832-12:2007
(reconfirmed)
ISO 5832-14:2007
(reconfirmed)
ISO 5838-2:1991 (reconfirmed)ISO 5838-3:1993 (reconfirmed)ISO 8319-1:1996 (reconfirmed)ISO 8319-2:1986 (reconfirmed)ISO 9268:1988 (reconfirmed)ISO 9269:1988 (reconfirmed)ISO 10334:1994 (reconfirmed)ISO 12189:2008 (reconfirmed)TC 164 Mechanical testing of metalsISO 7801:1984 (reconfirmed)
ISO 10275:2007 (reconfirmed)ISO 15363:2000 (reconfirmed)TC 172 Optics and photonicsISO 11382:2010
ISO 11455:1995 (reconfirmed)TC 184 Automation systems and integrationISO 20242-2:2010TC 190 Soil qualityISO/TS13896:2012ISO/TS13907:2012TC 201 Surface chemical analysisISO 17974:2002 (reconfirmed)ISO 21270:2004 (reconfirmed)ISO 24236:2005 (reconfirmed)ISO 24237:2005 (reconfirmed)TC 204 Intelligent transport systemsISO 17361:2007 (reconfirmed)TC 213 Dimensional and geometrical product
specifications and verificationISO/TS 14253-4:2010TC 219 Floor coveringsISO 26986:2010
TC 226 Materials for the production of primaryaluminium
ISO 23202:2006 (reconfirmed)TC 256 Pigments, dyestuffs and extendersISO 3262-1:1997 (reconfirmed)ISO 3262-2:1998 (reconfirmed)ISO 3262-3:1998 (reconfirmed)ISO 3262-4:1998 (reconfirmed)ISO 3262-5:1998 (reconfirmed)ISO 3262-6:1998 (reconfirmed)ISO 3262-7:1998 (reconfirmed)ISO 3262-8:1999 (reconfirmed)ISO 3262-9:1997 (reconfirmed)ISO 3262-10:2000
(reconfirmed)
ISO 3262-11:2000
(reconfirmed)
ISO 3262-13:1997
(reconfirmed)
ISO 3262-14:2000
(reconfirmed)
ISO 3262-15:2000
(reconfirmed)
ISO 3262-16:2000
(reconfirmed)
ISO 3262-17:2000
(reconfirmed)
ISO 3262-18:2000
(reconfirmed)
ISO 3262-19:2000
(reconfirmed)
ISO NORMEN / NORMES ISO14
ISO 3262-20:2000
(reconfirmed)
ISO 3262-21:2000
(reconfirmed)
ISO 3549:1995 (reconfirmed)ISO 10601:2007 (reconfirmed)TC 262 Risk managementISO Guide73:2009JTC 1 Information technologyISO/IEC 10373-3:2010ISO/IEC 15693-1:2010
NORMES ANNULEESPériode du 1er janvier 2016 au 31 janvier 2016.
TC 8 Ships and marine technologyISO 4085:1979 (replaced by )ISO 7838:1984 (replaced by )TC 10 Technical product documentationISO 4067-2:1980 (replaced by )ISO 82045-5:2005
(replaced by )
TC 17 SteelISO 437:1982 (replaced by )ISO 4999:2014 (replaced by )TC 20 Aircraft and space vehiclesISO 2026:1974 (replaced by )TC 22 Road vehiclesISO 7576:1990 (replaced by )ISO 7750-2:1984 (replaced by )ISO/TR13214:1996
(replaced by )
TC 23 Tractors and machinery for agricultureand forestry
ISO 3835-2:1977 (replaced by )ISO 3835-5:1982 (replaced by )ISO 8912:1986 (replaced by )TC 25 Cast irons and pig ironsISO 946:1975 (replaced by )TC 34 Food productsISO 5511:1992 (replaced by )TC 37 Terminology and other language and
content resourcesISO 12620:2009 (replaced by )TC 54 Essential oilsISO 11025:1998 (replaced by )TC 86 Refrigeration and air-conditioningISO 1992-8:1978 (replaced by )TC 87 CorkISO 3863:1989 (replaced by )TC 89 Wood-based panels
ISO 16895-1:2008
(replaced by ISO 16895:2016)
ISO 16895-2:2010
(replaced by ISO 16895:2016)
ISO 16893-1:2008
(replaced by ISO 16893:2016)
ISO 16893-2:2010
(replaced by ISO 16893:2016)
TC 105 Steel wire ropesISO 2701:1977 (replaced by )TC 106 DentistryISO 15606:1999 (replaced by ISO 18397:2016)ISO 22374:2005 (replaced by ISO 18397:2016)TC 111 Round steel link chains, chain slings,
components and accessoriesISO 3075:1980 (replaced by )TC 113 HydrometryISO/TS24155:2007
(replaced by ISO 24155:2016)
TC 119 Powder metallurgyISO 22394:2010 (replaced by )TC 131 Fluid power systemsISO 10945:1994 (replaced by )ISO 6430:1992 (replaced by )TC 142 Cleaning equipment for air and other
gasesISO 6584:1981 (replaced by )TC 188 Small craftISO 14509-2:2006
(replaced by )
TC 190 Soil qualityISO 11709:2011 (replaced by )TC 204 Intelligent transport systemsISO/TS 16403-1:2012
(replaced by )
ISO/TS 16403-2:2012
(replaced by )
ISO/TS 17575-1:2010
(replaced by ISO 17575-1:2016)
ISO/TS 17575-2:2010
(replaced by ISO 17575-2:2016)
ISO/TS 17575-3:2011
(replaced by ISO 17575-3:2016)
ISO/TS 17575-4:2011
(replaced by )
TC 226 Materials for the production of primaryaluminium
ISO 903:1976 (replaced by )TMBG Technical Management Board - groupsISO 13602-2:2006
(replaced by )
JTC 1 Information technologyISO/IEC 24752-3:2008
(replaced by )
ISO NORMEN / NORMES ISO15
Le NBN se charge de vous procurer toutespublications Internationales moyennantremboursement de ses frais.Veuillez bien préciser lors de votre commande laversion linguistique désirée, d’avance merci.Nous vous rappelons que tout document peut aussi êtreconsulté en notre bibliothèque, les jours ouvrables de 9:00à 16:00, le vendredi de 9:00 à 13:00.
INTERNATIONALORGANISATION FORSTANDARDIZATION
Nouvelles publicationsNieuwe publicaties
Les documents ISO existent en anglais et en françaisDe ISO-documenten bestaan in het Engels en in hetFrans.
Het NBN bezorgt U alle internationale publicaties, mitsterugbetaling van de kosten.Gelieve bij uw bestelling de gewenste taalkundigeversie te preciseren, dank U bij voorbaat.Elk document kan ook geraadpleegd worden in onzebibliotheek, op werkdagen van 9:00 tot 16:00, op vrijdagvan 9:00 tot 13:00.
PROJETS DE NORMES DIFFUSESPériode du 1er fevrier 2016 au 29 fevrier 2016.*Actuellement disponible en anglais seulement.
PC 283 Occupational health and safetymanagement systems
ISO/DIS 45001 Occupational health and safety managementsystems — Requirements with guidance foruse
TC 8 Ships and marine technologyISO/DIS 20519 Ships and marine technology —
Specification for bunkering of gas fuelledships
ISO/DIS 18139 Ships and marine technology — Globevalves for use in low temperatureapplications — Design and testingrequirements
ISO/DIS 18154 Ships and marine technology — Pilotoperated safety valves for low temperatureapplications — Design requirements
TC 20 Aircraft and space vehiclesISO/DIS 21323 Space data and information transfer systems
— CCSDS Bundle protocol specificationISO/DIS 21324 Space data and information transfer systems
— Space data link security protocolISO/DIS 19826 Space systems — Programme management
--Management of product characteristicsTC 22 Road vehiclesISO/DIS 13400-3
Road vehicles — Diagnostic communicationover Internet Protocol (DoIP) — Part 3:Wired vehicle interface based on IEEE 802.3(Revision of ISO 13400-3:2011)
TC 23 Tractors and machinery foragriculture and forestry
ISO 5395-2:2013/DAmd 2
Garden equipment — Safety requirementsfor combustion-engine-powered lawnmowers— Part 2: Pedestrian-controlled lawnmowers— Amendment 2: Cutting means enclosureguards
ISO/DIS 6531 Machinery for forestry — Portable chainsaws— Vocabulary(Revision of ISO 6531:2008)
ISO/DIS 7112 Machinery for forestry — Portablebrushcutters and grass-trimmers —Vocabulary
ISO NORMEN / NORMES ISO16
(Revision of ISO 7112:2008)
TC 24 Particle characterization includingsieving
ISO/DIS19430.2
Particle size analysis — Particle trackinganalysis (PTA) method
TC 25 Cast irons and pig ironsISO/DIS 16112 Compacted (vermicular) graphite cast irons
— Classification(Revision of ISO 16112:2006)
TC 28 Petroleum products and relatedproducts of synthetic or biologicalorigin
ISO/DIS 2592 Petroleum and related products —Determination of flash and fire points —Cleveland open cup method(Revision of ISO 2592:2000)
TC 29 Small toolsISO/DIS 1711-1 Assembly tools for screws and nuts —
Technical specifications — Part 1: Hand-operated wrenches and sockets(Revision of ISO 1711-1:2015)
ISO/DIS 1711-2 Assembly tools for screws and nuts —Technical specifications — Part 2: Machine-operated sockets (impact)(Revision of ISO 1711-2:2015)
TC 34 Food productsISO2256:1984/DAmd 1
Dried mint (spearmint) (Mentha spicataLinnaeus syn. Mentha viridis Linnaeus) —Specification — Amendment 1
ISO6571:2008/DAmd 1
Spices, condiments and herbs —Determination of volatile oil content(hydrodistillation method) — Amendment 1
ISO/DIS 19563 Determination of theanine in tea and instanttea in solid form using high-performanceliquid chromatography
TC 39 Machine toolsISO/DIS 14955-1
Machine tools — Environmental evaluationof machine tools — Part 1: Designmethodology for energy-efficient machinetools(Revision of ISO 14955-1:2014)
ISO/DIS 19085-4.2
Woodworking machines — Safety — Part 4:Vertical panel circular sawing machines
ISO/DIS 19085-7
Woodworking machines — Safety — Part 7:Surface planing, thickness planing,combined surface/thickness planingmachines
ISO/DIS 19085-9
Woodworking machines — Safety — Part 9:Circular saw benches (with and without slidingtable)
TC 41 Pulleys and belts (includingveebelts)
ISO/DIS 15236-2
Steel cord conveyor belts — Part 2:Preferred belt types(Revision of ISO 15236-2:2004)
TC 43 AcousticsISO/DIS18405.2
Underwater acoustics — Terminology
TC 44 Welding and allied processesISO/DIS 20378 Welding consumables — Rods for gas
welding of non alloy and creep-resistingsteels — Classification
ISO/DIS 23279 Non-destructive testing of welds —Ultrasonic testing — Characterization ofindications in welds(Revision of ISO 23279:2010)
TC 45 Rubber and rubber productsISO/DIS 1431-3 Rubber, vulcanized or thermoplastic —
Resistance to ozone cracking — Part 3:Reference and alternative methods fordetermining the ozone concentration inlaboratory test chambers(Revision of ISO 1431-3:2000)
ISO/DIS 1827 Rubber, vulcanized or thermoplastic —Determination of shear modulus andadhesion to rigid plates — Quadruple-shearmethods(Revision of ISO 1827:2011)
ISO/DIS 4662 Rubber, vulcanized or thermoplastic —Determination of rebound resilience(Revision of ISO 4662:2009, ISO4662:2009/Cor 1:2010)
ISO/DIS 4666-3 Rubber, vulcanized — Determination oftemperature rise and resistance to fatigue inflexometer testing — Part 3: Compressionflexometer (constant-strain type)(Revision of ISO 4666-3:2010)
ISO/DIS 23529 Rubber — General procedures for preparingand conditioning test pieces for physical testmethods(Revision of ISO 23529:2010)
TC 46 Information and documentationISO/DIS 2108 Information and documentation —
International Standard Book Number (ISBN)(Revision of ISO 2108:2005)
TC 58 Gas cylindersISO/DIS 17879 Gas cylinders — Self-closing cylinder valves
— Specification and type testingTC 59 Buildings and civil engineering
worksISO/DIS 21930 Sustainability in buildings and civil
engineering works — Core rules forenvironmental declaration of constructionproducts and services used in any type ofconstruction works
ISO NORMEN / NORMES ISO17
(Revision of ISO 21930:2007)
TC 61 PlasticsISO/DIS 4589-1 Plastics — Determination of burning
behaviour by oxygen index — Part 1:Guidance(Revision of ISO 4589-1:1996)
ISO/DIS 4589-2 Plastics — Determination of burningbehaviour by oxygen index — Part 2:Ambient-temperature test(Revision of ISO 4589-2:1996, ISO 4589-2:1996/Amd 1:2005)
ISO/DIS 4589-3 Plastics — Determination of burningbehaviour by oxygen index — Part 3:Elevated-temperature test(Revision of ISO 4589-3:1996)
ISO/DIS 294-1 Plastics — Injection moulding of testspecimens of thermoplastic materials — Part1: General principles, and moulding ofmultipurpose and bar test specimens(Revision of ISO 294-1:1996, ISO 294-1:1996/Amd 1:2001, ISO 294-1:1996/Amd2:2005)
ISO/DIS 15023-1
Plastics — Poly(vinyl alcohol) (PVAL)materials — Part 1: Designation system andbasis for specifications(Revision of ISO 15023-1:2001)
TC 69 Applications of statistical methodsISO/DIS 16355-2
Application of statistical and related methodsto new technology and product developmentprocess — Part 2: Acquistion of Voice ofCustomer and Voice of Stakeholder — Non-quantitative approaches
ISO/DIS 16355-4
Application of statistical and related methodsto new technology and product developmentprocess — Part 4: Analysis of non-quantitative and quantitative Voice ofCustomer and Voice of Stakeholder
ISO/DIS 16355-5
Application of statistical and related methodsto new technology and product developmentprocess — Part 5: Solution strategy
TC 83 Sports and other recreationalfacilities and equipment
ISO/DIS 10256-5
Protective equipment for use in ice hockey— Part 5: Neck laceration protectors for icehockey players
TC 84 Devices for administration ofmedicinal products and catheters
ISO 10555-1:2013/DAmd 1
Intravascular catheters — Sterile and single-use catheters — Part 1: Generalrequirements — Amendment 1
ISO/DIS 11608-4
Needle-based injection systems for medicaluse - Requirements and test methods —Part 4: Needle-based injection systemscontaining electronics
(Revision of ISO 11608-4:2006)
TC 92 Fire safetyISO/DIS 19021 Test method for determination of gas
concentrations in ISO 5659-2 using Fouriertransform infrared spectroscopy
ISO/DIS 26367-2
Guidelines for assessing the adverseenvironmental impact of fire effluents — Part2: Methodology for compiling data onenvironmentally significant emissions fromfires
TC 96 CranesISO/DIS 4309 Cranes — Wire ropes — Care and
maintenance, inspection and discard(Revision of ISO 4309:2010)
TC 102 Iron ore and direct reduced ironISO/DIS 3082 Iron ores — Sampling and sample
preparation procedures(Revision of ISO 3082:2009, ISO3082:2009/Cor 1:2009)
TC 106 DentistryISO/DIS 9873 Dentistry — Intra-oral mirrors
(Revision of ISO 9873:1998, ISO9873:1998/Cor 1:2000)
ISO/DIS 19715 Dentistry — Filling instruments with contraset
TC 110 Industrial trucksISO/DIS 22879 Castors and wheels — Requirements for
castors for furnitureISO/DIS 22880 Castors and wheels — Castors for furniture
— Requirements for castors for swivel chairsISO/DIS 22882 Castors and wheels — Requirements for
castors for hospital bedsTC 121 Anaesthetic and respiratory
equipmentISO19054:2005/DAmd 1
Rail systems for supporting medicalequipment — Amendment 1
TC 123 Plain bearingsISO/DIS 6280 Plain bearings — Requirements on backings
for thick-walled multilayer bearings(Revision of ISO 6280:1981)
ISO/DIS 6282 Plain bearings — Metallic thin-walled halfbearings — Determination of the sigma0,01*-limit(Revision of ISO 6282:1983)
ISO/DIS 6525 Plain bearings — Ring type thrust washersmade from strip — Dimensions andtolerances(Revision of ISO 6525:1983)
ISO/DIS 6526 Plain bearings — Pressed bimetallic halfthrust washers — Features and tolerances(Revision of ISO 6526:1983)
ISO NORMEN / NORMES ISO18
ISO/DIS 3548-2 Plain bearings — Thin-walled half bearingswith or without flange — Part 2:Measurement of wall thickness and flangethickness(Revision of ISO 3548-2:2009)
ISO/DIS 12132 Plain bearings — Quality assurance of thin-walled half bearings — Design FMEA(Revision of ISO 12132:1999)
ISO/DIS 12302 Plain bearings — Quality characteristics —Statistical process control (SPC)(Revision of ISO 12302:1993)
ISO/DIS 12308 Plain bearings — Quality assurance —Sample types — Definitions, applicationsand testing(Revision of ISO 12308:1994)
ISO/DIS 13778 Plain bearings — Quality assurance of thin-walled half bearings — Selective assemblyof bearings to achieve a narrow clearancerange(Revision of ISO 13778:1999)
ISO/DIS 20054 Plain bearings — Bearings containingdispersed solid lubricants
TC 126 Tobacco and tobacco productsISO15152:2003/DAmd 2
Tobacco — Determination of the content oftotal alkaloids as nicotine — Continuous-flowanalysis method — Amendment 2
TC 127 Earth-moving machineryISO/DIS 13766-1
Earth-moving- and Building constructionmachinery — Electromagneticcompatibility of machines with internalelectrical power supply — Part 1: GeneralEMC requirements under typical EMCenvironmental conditions(Revision of ISO 13766:2006)
ISO/DIS 13766-2
Earth-moving machinery — Electromagneticcompatibility — Part 2: EMC requirementsunder the aspect of functional safety(Revision of ISO 13766:2006)
TC 130 Graphic technologyISO/DIS 16762 Graphic technology — Post press --General
Requirements for transfer, handling andstorage
ISO/DIS 19594 Graphic technology — Test methods for thedetermination of the binding strength forperfect bound products — Page pull testworking upwards
TC 131 Fluid power systemsISO/DIS 6605 Hydraulic fluid power — Test methods for
hoses and hose assemblies(Revision of ISO 6605:2002)
TC 134 Fertilizers and soil conditioners
ISO/DIS 19670 Fertilizers and soil conditioners — Solid ureaaldehyde slow release fertilizer — Generalrequirements
TC 150 Implants for surgeryISO/DIS 19227 Cleaning of orthopedic implants - General
RequirementsISO 7206-2:2011/DAmd 1
Implants for surgery — Partial and total hipjoint prostheses — Part 2: Articulatingsurfaces made of metallic, ceramic andplastics materials — Amendment 1
ISO 7207-2:2011/DAmd 1
Implants for surgery — Components forpartial and total knee joint prostheses —Part 2: Articulating surfaces made of metal,ceramic and plastics materials —Amendment 1
ISO/DIS11491.2
Implants for surgery — Test method forimpact resistance of ceramic femoral headsfor hip joint prostheses
TC 153 ValvesISO/DIS 19240 Industrial valves - Lined metal quarter turn
and check valves for chemical process andrelated industries
TC 155 Nickel and nickel alloysISO/DIS 6372 Nickel and nickel alloys — Terms and
definitions(Revision of ISO 6372-1:1989, ISO 6372-2:1989, ISO 6372-3:1989)
TC 159 ErgonomicsISO/DIS 9241-220
Ergonomics of human-computer interaction— Part 220: Processes for enabling,executing and assessing human-centreddesign within organizations
TC 171 Document management applicationsISO/DIS 32000-2.3
Document management — Portabledocument format — Part 2: PDF 2.0
TC 184 Automation systems and integrationISO/DIS 20140-5
Automation systems and integration —Evaluating energy efficiency and otherfactors of manufacturing systems thatinfluence the environment — Part 5:Environmental influence evaluation data
TC 194 Biological and clinical evaluation ofmedical devices
ISO/DIS 10993-16
Biological evaluation of medical devices —Part 16: Toxicokinetic study design fordegradation products and leachables(Revision of ISO 10993-16:2010)
TC 201 Surface chemical analysisISO/DIS 16962 Surface chemical analysis — Analysis of
zinc- and/or aluminium-based metalliccoatings by glow-discharge optical-emissionspectrometry(Revision of ISO 16962:2005)
TC 204 Intelligent transport systems
ISO NORMEN / NORMES ISO19
ISO/DIS 13111-1
Intelligent transport systems (ITS) — Theuse of personal ITS station to support ITSservice provision for travelers — Part 1:General information and use casesdefinitions
ISO/DIS 13140-2
Electronic fee collection — Evaluation of on-board and roadside equipment for conformityto EN ISO 13141 — Part 2: Abstract testsuite(Revision of ISO/TS 13140-2:2012)
ISO/DIS 13143-2
Electronic fee collection — Evaluation of on-board and roadside equipment for conformityto EN ISO/TS 12813 — Part 2: Abstract testsuite(Revision of ISO/TS 13143-2:2011)
TC 206 Fine ceramicsISO/DIS 19603 Fine ceramics (advanced ceramics,
advanced technical ceramics) — Testmethod for determining elastic modulus andstrength of thick ceramic coating
ISO/DIS 20343 Fine ceramics (advanced ceramics,advanced technical ceramics) — Testmethod for determining elastic modulus ofthick ceramic coating at elevatedtemperature
TC 207 Environmental managementISO/DIS 14055-1
Environmental management — Guidelinesfor establishing good practices forcombatting land degradation anddesertification — Part 1: Good practicesframework
TC 209 Cleanrooms and associatedcontrolled environments
ISO/DIS 14644-13
Cleanrooms and associated controlledenvironments — Part 13: Cleaning ofsurfaces to achieve defined levels ofcleanliness in terms of particle and chemicalclassifications
TC 215 Health informaticsISO/DIS21298.2
Health informatics — Functional andstructural roles(Revision of ISO/TS 21298:2008)
ISO/DIS 21549-7.2
Health informatics — Patient healthcard data— Part 7: Medication data(Revision of ISO 21549-7:2007)
TC 224 Service activities relating to drinkingwater supply systems andwastewater systems - Quality criteriaof the service and performanceindicators
ISO/DIS 24516-3
Guidelines for management of assets ofwater supply and wastewater systems —Part 3: Wastewater collection networks
TC 228 Tourism and related servicesISO/DIS 11121 Recreational diving services —
Requirements for introductory programmesto scuba diving(Revision of ISO 11121:2009)
ISO/DIS 13687-2
Tourism and related services — Yachtharbours — Part 2: Minimum requirementsfor intermediate service level harbours
ISO/DIS 13687-3
Tourism and related services — Yachtharbours — Part 3: Minimum requirementsfor high service level harbours
ISO/DIS 24803 Recreational diving services —Requirements for recreational divingproviders(Revision of ISO 24803:2007)
TC 249 Traditional chinese medicineISO/DIS 18668-2
Traditional Chinese medicine — CodingSystem of Chinese Medicines — Part 2:Codes of Decoction Pieces
ISO/DIS 18668-3
Traditional Chinese medicine — CodingSystem of Chinese Medicines — Part 3:Codes of Chinese Materia Medica
ISO/DIS 18668-4
Traditional Chinese medicine — CodingSystem of Chinese Medicines — Part 4:Codes of granule forms of individualmedicinals for prescriptions
JTC 1 Information technologyISO/IEC/IEEEDIS 24748-5
Systems and software engineering — Lifecycle management — Part 5: Softwaredevelopment planning
ISO/IEC 14443-4:2008/DAmd 6
Identification cards — Contactless integratedcircuit cards — Proximity cards — Part 4:Transmission protocol — Amendment 6:S(PARAMETERS) clarification
ISO/IEC DIS20009-4
Information technology — Securitytechniques — Anonymous entityauthentication — Part 4: Mechanisms basedon weak secrets
ISO/IEC DIS27003
Information technology — Securitytechniques — Information securitymanagement system — Guidance(Revision of ISO/IEC 27003:2010)
ISO/IEC DIS27004
Information technology — Securitytechniques — Information securitymanagement — Monitoring, measurement,analysis and evaluation(Revision of ISO/IEC 27004:2009)
ISO/IEC 14496-10:2014/DAmd 3
Information technology — Coding of audio-visual objects — Part 10: Advanced VideoCoding — Amendment 3: AdditionalSupplemental Enhancement Information
ISO/IEC DIS14496-33
Information technology — Coding of audio-visual objects — Part 33: Internet VideoCoding
ISO NORMEN / NORMES ISO20
ISO/IEC DIS23000-18
Information Technologies — MultimediaApplication Formats (MPEG-A) — Part 18:Media Linking Application Format
ISO/IEC 23001-10:2015/DAmd 1
Information technology — MPEG systemstechnologies — Part 10: Carriage of timedmetadata metrics of media in ISO basemedia file format — Amendment 1: Carriageof ROI coordinates
ISO/IEC 23003-2:2010/DAmd 4
Information technology — MPEG audiotechnologies — Part 2: Spatial Audio ObjectCoding (SAOC) — Amendment 4: SAOCConformance
ISO/IEC DIS24779-4
Information technology — Cross-jurisdictional and societal aspects ofimplementation of biometric technologies —Pictograms, Icons and Symbols for use withBiometric Systems — Part 4: FingerprintApplications
ISO/IEC DIS20000-6
Information Technology — ServiceManagement — Part 6: Requirements forbodies providing audit and certification ofservice management systems
PROJETS FINALSPériode du 1er fevrier 2016 au 29 fevrier 2016.*Actuellement disponible en anglais seulement.
TC 2 FastenersISO/FDIS 4759-3 Tolerances for fasteners — Part 3:
Washers for bolts, screws and nuts —Product grades A, C and F(Revision of ISO 4759-3:2000)
TC 6 Paper, board and pulpsISO/FDIS 8254-2 Paper and board — Measurement of
specular gloss — Part 2: 75 degree glosswith a parallel beam, DIN method(Revision of ISO 8254-2:2003)
TC 21 Equipment for fire protection andfire fighting
ISO/FDIS 7076-6 Fire protection — Foam fire extinguishingsystems — Part 6: Vehicle mountedcompressed air foam systems
TC 22 Road vehiclesISO2575:2010/FDAmd 5
Road vehicles — Symbols for controls,indicators and tell-tales — Amendment 5
TC 29 Small toolsISO/FDIS 1641-1 End mills and slot drills — Part 1: Milling
cutters with cylindrical shanks(Revision of ISO 1641-1:2003)
ISO/FDIS 3293 Morse taper shank countersinks for angles60 degrees, 90 degrees and 120 degreesinclusive(Revision of ISO 3293:1975)
ISO/FDIS 3294 Parallel shank countersinks for angles 60,90 and 120 degrees inclusive(Revision of ISO 3294:1975)
TC 34 Food productsISO/FDIS 16634-2 Food products — Determination of the total
nitrogen content by combustion accordingto the Dumas principle and calculation ofthe crude protein content — Part 2:Cereals, pulses and milled cereal products(Revision of ISO/TS 16634-2:2009)
ISO/FDIS 16140-1.2 Microbiology of the food chain — Methodvalidation — Part 1: Vocabulary(Revision of ISO 16140:2003, ISO16140:2003/Amd 1:2011)
ISO/FDIS 16140-2.2 Microbiology of the food chain — Methodvalidation — Part 2: Protocol for thevalidation of alternative (proprietary)methods against a reference method(Revision of ISO 16140:2003, ISO16140:2003/Amd 1:2011)
ISO/FDIS 11702 Animal and vegetable fats and oils —Enzymatic determination of total sterolscontent(Revision of ISO 11702:2009)
ISO/FDIS 12966-3 Animal and vegetable fats and oils — Gaschromatography of fatty acid methyl esters— Part 3: Preparation of methyl estersusing trimethylsulfonium hydroxide (TMSH)(Revision of ISO 12966-3:2009)
ISO/FDIS 21033 Animal and vegetable fats and oils —Determination of trace elements byinductively coupled plasma optical emissionspectroscopy (ICP-OES)(Revision of ISO/TS 21033:2011, ISO/TS21033:2011/Amd 1:2012)
TC 35 Paints and varnishesISO/FDIS 4629-1 Binders for paints and varnishes —
Determination of hydroxyl value — Part 1:Titrimetric method without using a catalyst(Revision of ISO 4629:1996)
ISO/FDIS 4629-2 Binders for paints and varnishes —Determination of hydroxyl value — Part 2:Method using a catalyst
TC 38 TextilesISO/FDIS 105-G01 Textiles — Tests for colour fastness — Part
G01: Colour fastness to nitrogen oxides(Revision of ISO 105-G01:1993, ISO 105-G01:1993/Cor 1:1995)
ISO NORMEN / NORMES ISO21
ISO/FDIS 105-G04 Textiles — Tests for colour fastness — PartG04: Colour fastness to nitric oxide in theatmosphere at high humidities(Revision of ISO 105-G04:1989)
TC 44 Welding and allied processesISO/FDIS 14171 Welding consumables — Solid wire
electrodes, tubular cored electrodes andelectrode/flux combinations for submergedarc welding of non alloy and fine grainsteels — Classification(Revision of ISO 14171:2010)
TC 45 Rubber and rubber productsISO/FDIS 813 Rubber, vulcanized or thermoplastic —
Determination of adhesion to a rigidsubstrate — 90 degree peel method(Revision of ISO 813:2010)
ISO/FDIS 14558 Rubber — Determination of residualunsaturation of hydrogenated nitrile rubber(HNBR) by infrared spectroscopy(Revision of ISO 14558:2000)
TC 71 Concrete, reinforced concrete andpre-stressed concrete
ISO/FDIS 17785-1.2 Testing methods for pervious concrete —Part 1: Infiltration rate
TC 72 Textile machinery and accessoriesISO/FDIS 11111-1 Textile machinery — Safety requirements
— Part 1: Common requirements(Revision of ISO 11111-1:2009)
ISO 11111-2:2005/FDAmd 2
Textile machinery — Safety requirements— Part 2: Spinning preparatory andspinning machines — Amendment 2
ISO 11111-3:2005/FDAmd 2
Textile machinery — Safety requirements— Part 3: Nonwoven machinery —Amendment 2
ISO 11111-4:2005/FDAmd 2
Textile machinery — Safety requirements— Part 4: Yarn processing, cordage andrope manufacturing machinery —Amendment 2
ISO 11111-5:2005/FDAmd 2
Textile machinery — Safety requirements— Part 5: Preparatory machinery toweaving and knitting — Amendment 2
ISO 11111-6:2005/FDAmd 2
Textile machinery — Safety requirements— Part 6: Fabric manufacturing machinery— Amendment 2
ISO 11111-7:2005/FDAmd 2
Textile machinery — Safety requirements— Part 7: Dyeing and finishing machinery— Amendment 2
TC 92 Fire safetyISO12863:2010/FDAmd1
Standard test method for assessing theignition propensity of cigarettes —Amendment 1
TC 96 CranesISO/FDIS 4306-3 Cranes — Vocabulary — Part 3: Tower
cranes
(Revision of ISO 4306-3:2003, ISO 4306-3:2003/Amd 1:2011)
ISO/FDIS 4301-1 Cranes — Classification — Part 1: GeneralTC 106 DentistryISO/FDIS 10139-2 Dentistry — Soft lining materials for
removable dentures — Part 2: Materials forlong-term use(Revision of ISO 10139-2:2009)
TC 121 Anaesthetic and respiratoryequipment
IEC 80601-2-35:2009/FDAmd 1
Medical electrical equipment — Part 2-35:Particular requirements for the basic safetyand essential performance of heatingdevices using blankets, pads or mattressesand intended for heating in medical use —Amendment 1
TC 127 Earth-moving machineryISO/FDIS 15818 Earth-moving machinery — Lifting and
tying-down attachment points —Performance requirements
TC 130 Graphic technologyISO/FDIS 19445 Graphic technology — Metadata for graphic
arts workflow — XMP metadata for imageand document proofing
TC 131 Fluid power systemsISO/FDIS 3601-2 Fluid power systems — O-rings — Part 2:
Housing dimensions for generalapplications(Revision of ISO 3601-2:2008)
TC 138 Plastics pipes, fittings and valvesfor the transport of fluids
ISO/FDIS 16486-4 Plastics piping systems for the supply ofgaseous fuels — Unplasticized polyamide(PA-U) piping systems with fusion jointingand mechanical jointing — Part 4: Valves
TC 142 Cleaning equipment for air andother gases
ISO/FDIS 15858 UV-C Devices — Safety information —Permissible human exposure
ISO/FDIS 16170 In situ test methods for very high efficiencyfilter systems in industrial facilities
TC 150 Implants for surgeryISO/FDIS 7206-13 Implants for surgery — Partial and total hip
joint prostheses — Part 13: Determinationof resistance to torque of head fixation ofstemmed femoral components
TC 155 Nickel and nickel alloysISO/FDIS 8049 Ferronickel shot — Sampling for analysis
(Revision of ISO 8049:1988)
TC 168 Prosthetics and orthoticsISO/FDIS 10328 Prosthetics — Structural testing of lower-
limb prostheses — Requirements and testmethods
ISO NORMEN / NORMES ISO22
(Revision of ISO 10328:2006)
ISO/FDIS 22675 Prosthetics — Testing of ankle-foot devicesand foot units — Requirements and testmethods(Revision of ISO 22675:2006)
TC 183 Copper, lead, zinc and nickel oresand concentrates
ISO/FDIS 13543 Copper, lead, zinc and nickel sulfideconcentrates — Determination of mass ofcontained metal in a lot(Revision of ISO 13543:1996)
TC 185 Safety devices for protectionagainst excessive pressure
ISO 4126-1:2013/FDAmd 1
Safety devices for protection againstexcessive pressure — Part 1: Safety valves— Amendment 1
ISO 4126-5:2013/FDAmd 1
Safety devices for protection againstexcessive pressure — Part 5: Controlledsafety pressure relief systems (CSPRS) —Amendment 1
ISO 4126-7:2013/FDAmd 1
Safety devices for protection againstexcessive pressure — Part 7: Commondata — Amendment 1
TC 188 Small craftISO/FDIS 8666 Small craft — Principal data
(Revision of ISO 8666:2002)
TC 210 Quality management andcorresponding general aspects formedical devices
ISO/FDIS 80369-3 Small-bore connectors for liquids and gasesin healthcare applications — Part 3:Connectors for enteral applications
TC 257 Evaluation of energy savingsISO/FDIS 17743 Energy savings — Definition of a
methological framework applicable tocalculation and reporting on energy savings
JTC 1 Information technologyISO/IEC FDIS 25066 Systems and software engineering —
Systems and software QualityRequirements and Evaluation (SQuaRE) —Common industry Format for Usability —Evaluation Report
ISO/IEC FDIS 14443-2
Identification cards — Contactlessintegrated circuit cards — Proximity cards— Part 2: Radio frequency power andsignal interface(Revision of ISO/IEC 14443-2:2010,ISO/IEC 14443-2:2010/Amd 1:2011,ISO/IEC 14443-2:2010/Amd 2:2012,ISO/IEC 14443-2:2010/Amd 3:2012,ISO/IEC 14443-2:2010/FDAmd 5)
ISO/IEC FDIS 18370-2
Information technology — Securitytechniques — Blind digital signatures —
Part 2: Discrete logarithm basedmechanisms
ISO/IEC FDIS 24760-3
Information technology — Securitytechniques — A framework for identitymanagement — Part 3: Practice
ISO/IEC FDIS 27009 Information technology — Securitytechniques — Sector-specific application ofISO/IEC 27001 — Requirements
ISO/IEC FDIS 27033-6
Information technology — Securitytechniques — Network security — Part 6:Securing wireless IP network access
ISO/IEC FDIS 27035-1
Information technology — Securitytechniques — Information security incidentmanagement — Part 1: Principles ofincident management(Revision of ISO/IEC 27035:2011)
ISO/IEC FDIS 27035-2
Information technology — Securitytechniques — Information security incidentmanagement — Part 2: Guidelines to planand prepare for incident response(Revision of ISO/IEC 27035:2011)
ISO/IEC FDIS 29192-5
Information technology — Securitytechniques — Lightweight cryptography —Part 5: Hash-functions
ISO/IEC FDIS 23000-15
Information technology — Multimediaapplication format (MPEG-A) — Part 15:Multimedia preservation application
ISO/IEC 23008-5:2015/FDAmd 2
Information technology — High efficiencycoding and media delivery inheterogeneous environments — Part 5:Reference software for high efficiency videocoding — Amendment 2: ReferenceSoftware for the Multiview Main Profile ofHEVC
ISO/IEC FDIS 18384-1.2
Information technology — ReferenceArchitecture for Service OrientedArchitecture (SOA RA) — Part 1:Terminology and concepts for SOA
ISO/IEC FDIS 18384-2.2
Information technology — ReferenceArchitecture for Service OrientedArchitecture (SOA RA) — Part 2: ReferenceArchitecture for SOA Solutions
ISO/IEC FDIS 18384-3.2
Information Technology — ReferenceArchitecture for Service OrientedArchitecture (SOA RA) — Part 3: ServiceOriented Architecture Ontology
NORMES PUBLIEESNouvelles Normes internationales publiées entre le 1er fevrier2016 et le 29 fevrier 2016.*Actuellement disponible en anglais seulement.** Version française de la norme publiée précédemment enanglais seulement
ISO NORMEN / NORMES ISO23
TC 10 Technical product documentationISO 18388:2016 Technical product documentation (TPD) —
Relief grooves — Types and dimensioningTC 17 SteelISO 4829-2:2016 Steels — Determination of total silicon
contents — Reduced molybdosilicatespectrophotometric method — Part 2: Siliconcontents between 0,01 % and 0,05 %
ISO 4938:2016 Steel and iron — Determination of nickelcontent — Gravimetric or titrimetric method
ISO 4946:2016 Steel and cast iron — Determination ofcopper — 2,2'-Biquinoline spectrophotometricmethod
ISO 17577:2016 Steel — Ultrasonic testing of steel flatproducts of thickness equal to or greater than6 mm
TC 20 Aircraft and space vehiclesISO 3209:2016 Aerospace — Nuts, anchor, self-locking,
floating, two lug, with counterbore, with MJthreads, classifications: 1 100 MPa (atambient temperature )/235 degrees C, 1 100MPa (at ambient temperature )/315 degreesC and 1 100 MPa (at ambienttemperature)/425 degrees C — Dimensions
ISO 9154:2016 Aerospace — Bolts, with MJ threads, made ofheat-resistant nickel-based alloy, strengthclass 1 550 MPa — Procurementspecification
ISO 9609:2016 Aerospace — Nuts, hexagonal, plain,reduced height, normal across flats, with MJthreads, classifications: 450 MPa (at ambienttemperature) /120 degrees C, 450 MPa (atambient temperature) /235 degrees C, 600MPa (at ambient temperature) /425 degreesC, 900 MPa (at ambient temperature) /235degrees C, 900 MPa (at ambienttemperature) /315 degrees C, 900 MPa (atambient temperature) /650 degrees C, 1 100MPa (at ambient temperature) /235 degreesC, 1 100 MPa (at ambient temperature) /730degrees C and 1 250 MPa (at ambienttemperature)/600 degrees C — Dimensions
ISO 9618:2016 Aerospace — Nuts, hexagonal, slotted(castellated), reduced height, normal acrossflats, with MJ threads, classifications: 450MPa (at ambient temperature)/120 degreesC, 450 MPa (at ambient temperature)/235degrees C, 600 MPa (at ambienttemperature)/425 degrees C, 900 MPa (atambient temperature)/235 degrees C, 900MPa (at ambient temperature)/315 degreesC, 900 MPa (at ambient temperature)/650degrees C, 1 100 MPa (at ambienttemperature)/235 degrees C, 1 100 MPa (atambient temperature)/730 degrees C and 1
250 MPa (at ambient temperature)/600degrees C — Dimensions
ISO 12260:2016 Aerospace — Screws, pan head, internaloffset cruciform ribbed or unribbed drive,stepped shank, short or medium length MJthreads, metallic material, coated oruncoated, strength classes less than or equalto 1 100 MPa — Dimensions
ISO 12261:2016 Aerospace — Screws, pan head, internaloffset cruciform ribbed or unribbed drive, pitchdiameter shank, long length MJ threads,metallic material, coated or uncoated,strength classes less than or equal to 1 100MPa — Dimensions
ISO 12289:2016 Aerospace — Rivets, solid, in corrosion-resisting steel — Procurement specification
TC 22 Road vehiclesISO 6624-2:2016 Internal combustion engines — Piston rings
— Part 2: Half keystone rings made of castiron
ISO 6624-4:2016 Internal combustion engines — Piston rings— Part 4: Half keystone rings made of steel
ISO 12156-1:2016 Diesel fuel — Assessment of lubricity usingthe high-frequency reciprocating rig (HFRR)— Part 1: Test method
ISO 3917:2016 Road vehicles — Safety glazing materials —Test methods for resistance to radiation, hightemperature, humidity, fire and simulatedweathering
TC 23 Tractors and machinery foragriculture and forestry
ISO 5131:2015 Tractors for agriculture and forestry —Measurement of noise at the operator'sposition — Survey method
ISO 11001-1:2016 Agricultural wheeled tractors — Three-pointhitch couplers — Part 1: U-frame coupler
TC 29 Small toolsISO/TS 13399-204:2016
Cutting tool data representation andexchange — Part 204: Creation andexchange of 3D models — Inserts forreaming
ISO/TS 13399-303:2016
Cutting tool data representation andexchange— Part 303: Creation and exchange of 3D
models — Solid end millsISO/TS 13399-304:2016
Cutting tool data representation andexchange — Part 304: Creation andexchange of 3D models — Solid millingcutters with arbor hole
ISO/TS 13399-307:2016
Cutting tool data representation andexchange — Part 307: Creation andexchange of 3D models — End mills forindexable inserts
ISO/TS 13399-308:2016
Cutting tool data representation andexchange — Part 308: Creation and
ISO NORMEN / NORMES ISO24
exchange of 3D models — Milling cutters witharbor hole for indexable inserts
ISO/TS 13399-312:2016
Cutting tool data representation andexchange — Part 312: Creation andexchange of 3D models — Reamers forindexable inserts
ISO/TS 13399-401:2016
Cutting tool data representation andexchange — Part 401: Creation andexchange of 3D models — Converting,extending and reducing adaptive items
ISO 22917:2016 Precision superabrasives — Limit deviationsand run-out tolerances for grinding wheelswith diamond or cubic boron nitride
ISO 16916:2016 Tools for moulding — Tool specification sheetfor injection moulds
TC 34 Food productsISO 13904:2016 Animal feeding stuffs — Determination of
tryptophan contentISO 6885:2016 Animal and vegetable fats and oils —
Determination of anisidine valueISO 6886:2016 Animal and vegetable fats and oils —
Determination of oxidative stability(accelerated oxidation test)
ISO 27608:2010/Amd1:2016
Animal and vegetable fats and oils —Determination of Lovibond® colour —Automatic method — Amendment 1
ISO 5495:2005/Amd1:2016
Sensory analysis — Methodology — Pairedcomparison test — Amendment 1
TC 35 Paints and varnishesISO 2811-1:2016 Paints and varnishes — Determination of
density — Part 1: Pycnometer methodISO 4624:2016 Paints and varnishes — Pull-off test for
adhesionTC 37 Terminology and other language and
content resourcesISO 24617-6:2016 Language resource management —
Semantic annotation framework — Part 6:Principles of semantic annotation (SemAFPrinciples)
TC 39 Machine toolsISO 230-2:2014/Amd1:2016
Test code for machine tools — Part 2:Determination of accuracy and repeatability ofpositioning of numerically controlled axes —Amendment 1
ISO 230-10:2016 Test code for machine tools — Part 10:Determination of the measuring performanceof probing systems of numerically controlledmachine tools
TC 43 AcousticsISO 16283-3:2016 Acoustics — Field measurement of sound
insulation in buildings and of buildingelements — Part 3: Façade sound insulation
TC 44 Welding and allied processesISO/TS 18166:2016 Numerical welding simulation — Execution
and documentation
ISO 669:2016 Resistance welding — Resistance weldingequipment — Mechanical and electricalrequirements
ISO 9454-1:2016 Soft soldering fluxes — Classification andrequirements — Part 1: Classification,labelling and packaging
TC 45 Rubber and rubber productsISO 289-2:2016 Rubber, unvulcanized — Determinations
using a shearing-disc viscometer — Part 2:Determination of pre-vulcanizationcharacteristics
ISO 18898:2016 Rubber — Calibration and verification ofhardness testers
ISO 23233:2016 Rubber, vulcanized or thermoplastic —Determination of resistance to abrasion usinga driven, vertical abrasive disc
TC 46 Information and documentationISO 11799:2015 Information and documentation — Document
storage requirements for archive and librarymaterials
ISO/TS 18344:2016 Effectiveness of paper deacidificationprocesses
TC 58 Gas cylindersISO 11119-4:2016 Gas cylinders — Refillable composite gas
cylinders — Design, construction and testing— Part 4: Fully wrapped fibre reinforcedcomposite gas cylinders up to 150 l with load-sharing welded metallic liners
TC 61 PlasticsISO 4892-3:2016 Plastics — Methods of exposure to laboratory
light sources — Part 3: Fluorescent UV lampsISO/TR 18486:2016 Plastics — Parameters comparing the
spectral irradiance of a laboratory light sourcefor weathering applications to a referencesolar spectral irradiance
ISO 17855-2:2016 Plastics — Polyethylene (PE) moulding andextrusion materials — Part 2: Preparation oftest specimens and determination ofproperties
ISO 19069-2:2016 Plastics — Polypropylene (PP) moulding andextrusion materials — Part 2: Preparation oftest specimens and determination ofproperties
ISO 18188:2016 Specification of polypropylene drinking strawsTC 67 Materials, equipment and offshore
structures for petroleum,petrochemical and natural gasindustries
ISO 16904:2016 Petroleum and natural gas industries —Design and testing of LNG marine transferarms for conventional onshore terminals
ISO 17348:2016 Petroleum and natural gas industries —Materials selection for high content CO2 forcasing, tubing and downhole equipment
ISO NORMEN / NORMES ISO25
ISO 17349:2016 Petroleum and natural gas industries —Offshore platforms handling streams with highcontent of CO2 at high pressures
ISO 21809-3:2016 Petroleum and natural gas industries —External coatings for buried or submergedpipelines used in pipeline transportationsystems — Part 3: Field joint coatings
ISO 19901-5:2016 Petroleum and natural gas industries —Specific requirements for offshore structures— Part 5: Weight control during engineeringand construction
TC 69 Applications of statistical methodsISO 7870-6:2016 Control charts — Part 6: EWMA control
chartsTC 70 Internal combustion enginesISO 4548-14:2016 Methods of test for full-flow lubricating oil
filters for internal combustion engines — Part14: Cold start simulation and hydraulic pulsedurability for composite filter housings
TC 76 Transfusion, infusion and injection,and blood processing equipment formedical and pharmaceutical use
ISO 8362-5:2016 Injection containers and accessories — Part5: Freeze drying closures for injection vials
TC 83 Sports and other recreationalfacilities and equipment
ISO 20187:2016 Inflatable play equipment — Safetyrequirements and test methods
TC 85 Nuclear energy, nuclear technologies,and radiological protection
ISO 11665-9:2016 Measurement of radioactivity in theenvironment — Air: Radon-222 — Part 9:Test methods for exhalation rate of buildingmaterials
ISO 16637:2016 Radiological protection — Monitoring andinternal dosimetry for staff members exposedto medical radionuclides as unsealed sources
TC 92 Fire safetyISO 9705-1:2016 Reaction to fire tests — Room corner test for
wall and ceiling lining products — Part 1: Testmethod for a small room configuration
TC 94 Personal safety -- Protective clothingand equipment
ISO 17491-4:2008/Amd1:2016
Protective clothing — Test methods forclothing providing protection againstchemicals — Part 4: Determination ofresistance to penetration by a spray of liquid(spray test) — Amendment 1
TC 96 CranesISO 8566-2:2016 Cranes — Cabins and control stations — Part
2: Mobile cranesISO 9926-3:2016 Cranes — Training of operators — Part 3:
Tower cranesTC 102 Iron ore and direct reduced iron
ISO/TR 18336:2016 Guidelines for good XRF laboratory practicefor the iron ore industry
TC 106 DentistryISO 9693-2:2016 Dentistry — Compatibility testing — Part 2:
Ceramic-ceramic systemsTC 107 Metallic and other inorganic coatingsISO 11177:2016 Vitreous and porcelain enamels — Inside and
outside enamelled valves and pressure pipefittings for untreated and potable water supply— Quality requirements and testing
ISO 18555:2016 Metallic and other inorganic coatings —Determination of thermal conductivity ofthermal barrier coatings
ISO 28721-5:2016 Vitreous and porcelain enamels — Glass-lined apparatus for process plants — Part 5:Presentation and characterization of defects
TC 108 Mechanical vibration, shock andcondition monitoring
ISO 2954:2012 Mechanical vibration of rotating andreciprocating machinery — Requirements forinstruments for measuring vibration severity
ISO 16063-21:2003/Amd 1:2016
Methods for the calibration of vibration andshock transducers — Part 21: Vibrationcalibration by comparison to a referencetransducer — Amendment 1
ISO 14835-1:2016 Mechanical vibration and shock — Coldprovocation tests for the assessment ofperipheral vascular function — Part 1:Measurement and evaluation of finger skintemperature
TC 110 Industrial trucksISO 10896-2:2016 Rough-terrain trucks — Safety requirements
and verification — Part 2: Slewing trucksTC 113 HydrometryISO/TR 21414:2016 Hydrometry — Groundwater — Surface
geophysical surveys for hydrogeologicalpurposes
TC 119 Powder metallurgyISO 4499-3:2016 Hardmetals — Metallographic determination
of microstructure — Part 3: Measurement ofmicrostructural features in Ti (C, N) andWC/cubic carbide based hardmetals
ISO 4499-4:2016 Hardmetals — Metallographic determinationof microstructure — Part 4: Characterisationof porosity, carbon defects and eta-phasecontent
TC 121 Anaesthetic and respiratoryequipment
ISO 5360:2016 Anaesthetic vaporizers — Agent-specificfilling systems
ISO 80601-2-13:2011/Amd 1:2015
Medical electrical equipment — Part 2-13:Particular requirements for basic safety andessential performance of an anaestheticworkstation — Amendment 1
ISO NORMEN / NORMES ISO26
ISO 14408:2016 Tracheal tubes designed for laser surgery —Requirements for marking and accompanyinginformation
ISO 7396-1:2016 Medical gas pipeline systems — Part 1:Pipeline systems for compressed medicalgases and vacuum
ISO 11197:2016 Medical supply unitsTC 131 Fluid power systemsISO 15171-2:2016 Connections for fluid power and general use
— Hydraulic couplings for diagnosticpurposes — Part 2: Coupling with M16 x 2end for connection under pressure
TC 135 Non-destructive testingISO 12707:2016 Non-destructive testing — Magnetic particle
testing — VocabularyTC 138 Plastics pipes, fittings and valves for
the transport of fluidsISO 8639:2016 Glass-reinforced thermosetting plastics
(GRP) pipes and fittings — Test methods forleaktightness and proof of structural design offlexible joints
TC 147 Water qualityISO 19827:2016 Water quality — Determination of the acute
toxicity to the freshwater rotifer Brachionuscalyciflorus
TC 159 ErgonomicsISO 9241-161:2016 Ergonomics of human-system interaction —
Part 161: Guidance on visual user-interfaceelements
ISO 9241-391:2016 Ergonomics of human-system interaction —Part 391: Requirements, analysis andcompliance test methods for the reduction ofphotosensitive seizures
TC 160 Glass in buildingISO 1288-1:2016 Glass in building — Determination of the
bending strength of glass — Part 1:Fundamentals of testing glass
ISO 1288-2:2016 Glass in building — Determination of thebending strength of glass — Part 2: Coaxialdouble-ring test on flat specimens with largetest surface areas
ISO 1288-3:2016 Glass in building — Determination of thebending strength of glass — Part 3: Test withspecimen supported at two points (four pointbending)
ISO 1288-4:2016 Glass in building — Determination of thebending strength of glass — Part 4: Testing ofchannel shaped glass
ISO 1288-5:2016 Glass in building — Determination of thebending strength of glass — Part 5: Coaxialdouble ring test on flat specimens with smalltest surface areas
TC 161 Control and protective devices forgas and/or oil burners and appliances
ISO 23551-8:2016 Safety and control devices for gas burnersand gas-burning appliances — Particularrequirements — Part 8: Multifunctionalcontrols
TC 172 Optics and photonicsISO 14490-3:2016 Optics and photonics — Test methods for
telescopic systems — Part 3: Test methodsfor telescopic sights
ISO 11145:2016 Optics and photonics — Lasers and laser-related equipment — Vocabulary andsymbols
TC 181 Safety of toysISO/TR 8124-8:2016 Safety of toys — Part 8: Age determination
guidelinesTC 183 Copper, lead, zinc and nickel ores
and concentratesISO 10378:2016 Copper, lead and zinc sulfide concentrates —
Determination of gold and silver — Fire assaygravimetric and flame atomic absorptionspectrometric method
TC 184 Automation systems and integrationISO 10303-21:2016 Industrial automation systems and integration
— Product data representation and exchange— Part 21: Implementation methods: Cleartext encoding of the exchange structure
TC 188 Small craftISO 11592-1:2016 Small craft — Determination of maximum
propulsion power rating using manoeuvringspeed — Part 1: Craft with a length of hullless than 8 m
TC 190 Soil qualityISO 15009:2016 Soil quality — Gas chromatographic
determination of the content of volatilearomatic hydrocarbons, naphthalene andvolatile halogenated hydrocarbons — Purge-and-trap method with thermal desorption
ISO 17586:2016 Soil quality — Extraction of trace elementsusing dilute nitric acid
ISO 22155:2016 Soil quality — Gas chromatographicdetermination of volatile aromatic andhalogenated hydrocarbons and selectedethers — Static headspace method
TC 194 Biological and clinical evaluation ofmedical devices
ISO 22442-1:2015 Medical devices utilizing animal tissues andtheir derivatives — Part 1: Application of riskmanagement
ISO 22442-2:2015 Medical devices utilizing animal tissues andtheir derivatives — Part 2: Controls onsourcing, collection and handling
TC 198 Sterilization of health care productsISO 15883-7:2016 Washer-disinfectors — Part 7: Requirements
and tests for washer-disinfectors employingchemical disinfection for non-invasive, non-
ISO NORMEN / NORMES ISO27
critical thermolabile medical devices andhealthcare equipment
TC 204 Intelligent transport systemsISO 14296:2016 Intelligent transport systems — Extension of
map database specifications for applicationsof cooperative ITS
TC 207 Environmental managementISO 14004:2016 Environmental management systems —
General guidelines on implementationTC 210 Quality management and
corresponding general aspects formedical devices
ISO 13485:2016 Medical devices — Quality managementsystems — Requirements for regulatorypurposes
TC 217 CosmeticsISO 16128-1:2016 Guidelines on technical definitions and criteria
for natural and organic cosmetic ingredientsand products — Part 1: Definitions foringredients
TC 218 TimberISO 8903:2016 Broadleaved sawn timber — Nominal sizesTC 261 Additive manufacturingISO/ASTM 52915:2016 Specification for Additive Manufacturing File
Format (AMF) Version 1.2TC 299 Robots and robotic devicesISO/TS 15066:2016 Robots and robotic devices — Collaborative
robotsTMBG Technical Management Board -
groupsISO/IEC 80079-38:2016
Explosive atmospheres — Part 38:Equipment and components in explosiveatmospheres in underground mines
ISO/IEC 80079-20-2:2016
Explosive atmospheres — Part 20-2: Materialcharacteristics — Combustible dusts testmethods
IULTCS International Union of LeatherTechnologists and ChemistsSocieties
ISO 2417:2016 Leather — Physical and mechanical tests —Determination of the static absorption ofwater
ISO 2589:2016 Leather — Physical and mechanical tests —Determination of thickness
ISO 3377-2:2016 Leather — Physical and mechanical tests —Determination of tear load — Part 2: Doubleedge tear
ISO 17229:2016 Leather — Physical and mechanical tests —Determination of water vapour absorption
ISO 17236:2016 Leather — Physical and mechanical tests —Determination of extension set
ISO 19070:2016 Leather — Chemical determination of N-methyl-2-pyrrolidone (NMP) in leather
ISO 19071:2016 Leather — Chemical tests — Determinationof chromium (VI) and the reductive potentialfor chromium tanning agents
JTC 1 Information technologyISO/IEC 14651:2016 Information technology — International string
ordering and comparison — Method forcomparing character strings and descriptionof the common template tailorable ordering
ISO/IEC/IEEE 8802-1X:2013/Amd 1:2016
Information technology —Telecommunications and informationexchange between systems — Local andmetropolitan area networks — Part 1X: Port-based network access control — Amendment1: MAC security key agreement protocol(MKA) extensions
ISO/IEC 14543-3-11:2016
Information technology — Home electronicsystem (HES) — Part 3-11: FrequencyModulated Wireless Short-Packet (FMWSP)protocol optimised for energy harvesting —Architecture and lower layer protocols
ISO/IEC 27000:2016 Information technology — Securitytechniques — Information securitymanagement systems — Overview andvocabulary
ISO/IEC 28360:2015 Information technology — Office equipment— Determination of chemical emission ratesfrom electronic equipment
ISO/IEC28360:2015/Cor 1:2016
Information technology — Office equipment— Determination of chemical emission ratesfrom electronic equipment — TechnicalCorrigendum 1
ISO/IEC 23001-7:2016 Information technology — MPEG systemstechnologies — Part 7: Common encryptionin ISO base media file format files
ISO/IEC 15418:2016 Information technology — Automaticidentification and data capture techniques —GS1 Application Identifiers and ASC MH10Data Identifiers and maintenance
ISO/IEC 19762:2016 Information technology — Automaticidentification and data capture (AIDC)techniques — Harmonized vocabulary
NORMES CONFIRMEESLes Normes internationales suivantes sont confirmées pour cinqans:
TC 6 Paper, board and pulpsISO 3039:2010
TC 8 Ships and marine technologyISO 3796:1999 (reconfirmed)ISO 5894:1999 (reconfirmed)TC 11 Boilers and pressure vesselsISO 16528-1:2007 (reconfirmed)
ISO NORMEN / NORMES ISO28
ISO 16528-2:2007 (reconfirmed)TC 17 SteelISO 2566-1:1984 (reconfirmed)ISO 2566-2:1984 (reconfirmed)TC 20 Aircraft and space vehiclesISO 7481:2000 (reconfirmed)ISO 8641:2008
ISO 8642:2008
TC 27 Solid mineral fuelsISO 7936:1992 (reconfirmed)ISO 8858-2:2004 (reconfirmed)ISO 8858-3:2004 (reconfirmed)ISO 20905:2004 (reconfirmed)ISO 157:1996 (reconfirmed)ISO 562:2010
ISO 609:1996 (reconfirmed)ISO 625:1996 (reconfirmed)ISO 687:2010
ISO 1018:1975 (reconfirmed)ISO 1171:2010
ISO 7404-2:2009
ISO 7404-3:2009
ISO 7404-5:2009
ISO 17246:2010
ISO 29541:2010
TC 29 Small toolsISO 3338-1:1996 (reconfirmed)ISO 3338-3:1996 (reconfirmed)ISO 8695:2010
ISO 9181:2007 (reconfirmed)ISO 9449:2007 (reconfirmed)ISO 11900-1:2007 (reconfirmed)ISO 11901-1:2003 (reconfirmed)TC 30 Measurement of fluid flow in
closed conduitsISO 9951:1993 (reconfirmed)TC 33 RefractoriesISO 12676:2000 (reconfirmed)TC 34 Food productsISO 17997-1:2004
ISO 17997-2:2004
TC 43 AcousticsISO 10140-2:2010
ISO 10140-3:2010
ISO 10140-5:2010
TC 106 DentistryISO 21606:2007 (reconfirmed)TC 110 Industrial trucksISO 3691-5:2014
TC 113 Hydrometry
ISO 4374:1990 (reconfirmed)TC 130 Graphic technologyISO 12218:1997 (reconfirmed)ISO 12645:1998 (reconfirmed)ISO 16612-1:2005 (reconfirmed)ISO 28178:2009
TC 131 Fluid power systemsISO 21018-1:2008
TC 132 FerroalloysISO 310:1992
ISO 312:1986
ISO 315:1984
ISO 317:1984
ISO 320:1981
ISO 548:1981
ISO 549:1981
ISO 619:1981
ISO 4293:1982
ISO 4295:1988
ISO 4296-1:1984
ISO 4296-2:1983
ISO 4297:1978
ISO 4298:1984
ISO 4299:1989
ISO 4571:1981
ISO 5889:1983
ISO 5890:1981
ISO 5975:1983
ISO 5997:1984
ISO 6127:1981
ISO 6129:1981
ISO 6130:1985
ISO 6153:1989
ISO 6154:1989
ISO 6230:1989
ISO 6233:1983
ISO 6331:1983
ISO 6629:1981
ISO 7723:1984
ISO 7953:1985
ISO 7969:1985
ISO 7990:1985
ISO 8530:1986
ISO 8531:1986
ISO 8541:1986
ISO NORMEN / NORMES ISO29
ISO 8542:1986
ISO 8889:1988
ISO 9292:1988
ISO 9681:1990
TC 147 Water qualityISO 11704:2010
TC 172 Optics and photonicsISO 9385:1990 (reconfirmed)ISO 9689:1990 (reconfirmed)ISO 12844:1999 (reconfirmed)ISO 15004-2:2007
TC 173 Assistive products for personswith disability
ISO 7176-9:2009
TC 193 Natural gasISO 15403-1:2006 (reconfirmed)ISO 12213-3:2006 (reconfirmed)ISO 23874:2006 (reconfirmed)TC 198 Sterilization of health care
productsISO 11140-3:2007 (reconfirmed)ISO 11140-4:2007 (reconfirmed)ISO 11140-5:2007 (reconfirmed)ISO 15883-2:2006 (reconfirmed)ISO 15883-3:2006 (reconfirmed)TC 201 Surface chemical analysisISO 22048:2004 (reconfirmed)ISO 14237:2010
TC 221 GeosyntheticsISO 12236:2006 (reconfirmed)ISO 13431:1999 (reconfirmed)ISO 13433:2006 (reconfirmed)JTC 1 Information technologyISO/IEC 11581-6:1999 (reconfirmed)ISO/IEC 14754:1999 (reconfirmed)ISO/IEC 15411:1999 (reconfirmed)ISO/IEC 15412:1999 (reconfirmed)ISO/IEC TS 20071-11:2012
NORMES ANNULEESPériode du 1er fevrier 2016 au 29 fevrier 2016.
TC 20 Aircraft and space vehiclesISO 6965:1982 (replaced by )TC 22 Road vehiclesISO 15765-3:2004 (replaced by ISO 14229-3:2012)TC 23 Tractors and machinery for agriculture
and forestry
ISO 11787:1995 (replaced by )ISO 11788-1:1997 (replaced by )ISO 11788-2:2000 (replaced by )ISO 11788-3:2000 (replaced by )TC 43 AcousticsISO 12124:2001 (replaced by )ISO 140-5:1998 (replaced by ISO 16283-1:2014, ISO 16283-
3:2016)TC 61 PlasticsISO 1872-2:2007 (replaced by ISO 17855-2:2016)ISO 1873-2:2007 (replaced by ISO 19069-2:2016)TC 92 Fire safetyISO 9705:1993 (replaced by ISO 9705-1:2016)TC 106 DentistryISO 9693:1999 (replaced by ISO 9693-1:2012, ISO 9693-
2:2016)ISO 9693:1999/Amd1:2005
(replaced by ISO 9693-1:2012, ISO 9693-2:2016)
TC 110 Industrial trucksISO 3691:1980 (replaced by ISO 3691-6:2013)ISO 3691:1980/Amd1:1983
(replaced by )
TC 119 Powder metallurgyISO 4505:1978 (replaced by ISO 4499-4:2016)TC 121 Anaesthetic and respiratory equipmentISO 10083:2006 (replaced by ISO 7396-1:2016)TC 188 Small craftISO 11592:2001 (replaced by ISO 11592-1:2016)TC 210 Quality management and
corresponding general aspects formedical devices
ISO/TR 14969:2004 (replaced by ISO 13485:2016)TC 226 Materials for the production of primary
aluminiumISO 805:1976 (replaced by )ISO 900:1977 (replaced by )ISO 1232:1976 (replaced by )ISO 1617:1976 (replaced by )ISO 1618:1976 (replaced by )ISO 2069:1976 (replaced by )ISO 2070:1997 (replaced by )ISO 2071:1976 (replaced by )ISO 2072:1981 (replaced by )ISO 3390:1976 (replaced by )JTC 1 Information technologyISO/IEC 19762-1:2008 (replaced by ISO/IEC 19762:2016)ISO/IEC 19762-2:2008 (replaced by ISO/IEC 19762:2016)ISO/IEC 19762-3:2008 (replaced by ISO/IEC 19762:2016)ISO/IEC 19762-4:2008 (replaced by ISO/IEC 19762:2016)ISO/IEC 19762-5:2008 (replaced by ISO/IEC 19762:2016)
ISO NORMEN / NORMES ISO30
Le NBN se charge de vous procurer toutespublications Internationales moyennantremboursement de ses frais.Veuillez bien préciser lors de votre commande laversion linguistique désirée, d’avance merci.Nous vous rappelons que tout document peut aussi êtreconsulté en notre bibliothèque, les jours ouvrables de 9:00à 16:00, le vendredi de 9:00 à 13:00.
INTERNATIONALORGANISATION FORSTANDARDIZATION
Nouvelles publicationsNieuwe publicaties
Les documents ISO existent en anglais et en françaisDe ISO-documenten bestaan in het Engels en in hetFrans.
Het NBN bezorgt U alle internationale publicaties, mitsterugbetaling van de kosten.Gelieve bij uw bestelling de gewenste taalkundigeversie te preciseren, dank U bij voorbaat.Elk document kan ook geraadpleegd worden in onzebibliotheek, op werkdagen van 9:00 tot 16:00, op vrijdagvan 9:00 tot 13:00.
PROJETS DE NORMES DIFFUSESPériode du 1er mars 2016 au 31 mars 2016.*Actuellement disponible en anglais seulement.
PC 280 Management ConsultancyISO/DIS20700
Guidelines for management consultancyservices
TC 2 FastenersISO/DIS 4032 Hexagon regular nuts (style 1) — Product
grades A and B(Revision of ISO 4032:2012)
ISO/DIS 4033 Hexagon high nuts (style 2) — Product gradesA and B(Revision of ISO 4033:2012)
ISO/DIS 4034 Hexagon regular nuts (style 1) — Productgrade C(Revision of ISO 4034:2012)
ISO/DIS 4035 Hexagon thin nuts (style 0), chamfered —Product grades A and B(Revision of ISO 4035:2012)
ISO/DIS 4161 Hexagon high nuts with flange — Productgrades A and B(Revision of ISO 4161:2012)
ISO/DIS 7040 Prevailing torque hexagon regular nuts (withnon-metallic insert) — Product grades A and B(Revision of ISO 7040:2012)
ISO/DIS 7041 Prevailing torque hexagon high nuts (with non-metallic insert) — Product grades A and B(Revision of ISO 7041:2012)
ISO/DIS 7042 Prevailing torque (all-metal) hexagon high nuts— Product grades A and B(Revision of ISO 7042:2012, ISO 7720:2012)
ISO/DIS 7043 Prevailing torque hexagon high nuts withflange (with non-metallic insert) — Productgrades A and B(Revision of ISO 7043:2012)
ISO/DIS 7044 Prevailing torque (all-metal) hexagon high nutswith flange — Product grades A and B(Revision of ISO 7044:2012)
ISO/DIS 7719 Prevailing torque (all-metal) hexagon regularnuts — Product grades A and B(Revision of ISO 7719:2012)
ISO/DIS 8673 Hexagon regular nuts (style 1), with fine pitchthread — Product grades A and B(Revision of ISO 8673:2012)
ISO/DIS 8674 Hexagon high nuts (style 2), with fine pitchthread — Product grades A and B(Revision of ISO 8674:2012)
ISO NORMEN / NORMES ISO31
ISO/DIS 8675 Hexagon thin nuts (style 0) chamfered, withfine pitch thread — Product grades A and B(Revision of ISO 8675:2012)
ISO/DIS10511
Prevailing torque hexagon thin nuts (with non-metallic insert) — Product grades A and B(Revision of ISO 10511:2012)
ISO/DIS10512
Prevailing torque hexagon regular nuts (withnon-metallic insert), with fine pitch thread —Product grades A and B(Revision of ISO 10512:2012)
ISO/DIS10513
Prevailing torque (all-metal) hexagon highnuts, with fine pitch thread — Product gradesA and B(Revision of ISO 10513:2012)
ISO/DIS10663
Hexagon high nuts with flange, with fine pitchthread — Product grades A and B(Revision of ISO 10663:2012)
ISO/DIS12125
Prevailing torque hexagon high nuts withflange (with non-metallic insert), with fine pitchthread — Product grades A and B(Revision of ISO 12125:2012)
ISO/DIS12126
Prevailing torque (all-metal) hexagon high nutswith flange, with fine pitch thread — Productgrades A and B(Revision of ISO 12126:2012)
TC 5 Ferrous metal pipes and metallicfittings
ISO/DIS18468
Epoxy coating of ductile iron fittings, valvesand accessories
TC 12 Quantities and unitsISO/DIS80000-7
Quantities and units — Part 7: Light andradiation(Revision of ISO 80000-7:2008)
TC 20 Aircraft and space vehiclesISO/DIS18440
Space data and information transfer systems— Space link extension — Internet protocol fortransfer services(Revision of ISO 18440:2013)
ISO/DIS18441
Space data and information transfer systems— Space link extension — Applicationprogram interface for transfer services — Corespecification(Revision of ISO 18441:2013)
ISO/DIS18442
Space data and information transfer systems— Space link extension — Applicationprogram interface for return all frames service(Revision of ISO 18442:2013)
ISO/DIS18443
Space data and information transfer systems— Space link extension — Applicationprogram interface for return channel framesservice(Revision of ISO 18443:2013)
ISO/DIS18444
Space data and information transfer systems— Space link extension — Applicationprogram interface for return operational controlfields service(Revision of ISO 18444:2013)
ISO/DIS18445
Space data and information transfer systems— Space link extension — Applicationprogram interface for the forward CLTUservice(Revision of ISO 18445:2013)
ISO/DIS18446
Space data and information transfer systems— Space link extension — Applicationprogram interface for the forward space packetservice(Revision of ISO 18446:2013)
ISO/DIS22645
Space data and information transfer systems— TM (telemetry) space data link protocol(Revision of ISO 22645:2005, ISO22645:2005/Amd 1:2015)
ISO/DIS22664
Space data and information transfer systems— TC (telecommand) space data link protocol(Revision of ISO 22664:2013, ISO22664:2013/Amd 1:2015)
ISO/DIS22666
Space data and information transfer systems— AOS (advanced orbiting systems) spacedata link protocol(Revision of ISO 22666:2007, ISO22666:2007/Amd 1:2015)
ISO/DIS16192
Space systems — Experience gained in spaceprojects (lessons learned) — Principles andguidelines(Revision of ISO 16192:2010)
TC 22 Road vehiclesISO/DIS15082
Road vehicles — Tests for rigid plastic safetyglazing materials(Revision of ISO 15082:1999)
ISO/DIS12614-19
Road vehicles — Liquefied natural gas (LNG)fuel system components — Part 19: Automaticvalve
TC 28 Petroleum products and relatedproducts of synthetic or biologicalorigin
ISO/DIS 6246 Petroleum products — Gum content of lightand middle distillate fuels — Jet evaporationmethod(Revision of ISO 6246:1995, ISO6246:1995/Cor 1:1998)
TC 34 Food productsISO/DIS19343
Microbiology of the food chain — Detectionand quantification of histamine in fish andfishery products — HPLC method
ISO/DIS21872
Microbiology of the food chain — Horizontalmethod for the detection of potentiallyenteropathogenic Vibrio parahaemolyticus,Vibrio cholerae and Vibrio vulnificus(Revision of ISO/TS 21872-1:2007, ISO/TS21872-2:2007, ISO/TS 21872-1:2007/Cor1:2008)
TC 37 Terminology and other language andcontent resources
ISO/DIS24617-8
Language resource management — Semanticannotation framework (SemAF) — Part 8:Semantic relations in discourse, coreannotation schema (ISO DR-corel)
TC 38 Textiles
ISO NORMEN / NORMES ISO32
ISO/DIS21340
Test methods for fibrous activated carbon
TC 39 Machine toolsISO/DIS14955-2
Machine tools - Environmental evaluation ofmachine tools — Part 2: Methods formeasuring energy supplied to machine toolsand machine tool components
TC 44 Welding and allied processesISO/DIS17640
Non-destructive testing of welds — Ultrasonictesting — Techniques, testing levels, andassessment(Revision of ISO 17640:2010)
ISO/DIS 9455-13
Soft soldering fluxes — Test methods — Part13: Determination of flux spattering(Revision of ISO 9455-13:1996)
ISO/DIS19828
Welding for aerospace applications — Visualinspection of welds
TC 45 Rubber and rubber productsISO/DIS11424.2
Rubber hoses and tubing for air and vacuumsystems for internal-combustion engines —Specification(Revision of ISO 11424:1996)
ISO/DIS19718
Rubber and plastics hoses and hoseassemblies, wire- or textile- reinforced, forhydraulic power units used in heavy dutyhydraulic tool applications — Specification
ISO/DIS 2007 Rubber, unvulcanized — Determination ofplasticity — Rapid-plastimeter method(Revision of ISO 2007:2007)
ISO/DIS 4649 Rubber, vulcanized or thermoplastic —Determination of abrasion resistance using arotating cylindrical drum device(Revision of ISO 4649:2010)
ISO/DIS 6179 Rubber, vulcanized or thermoplastic — Rubbersheets and rubber-coated fabrics —Determination of transmission rate of volatileliquids (gravimetric technique)(Revision of ISO 6179:2010)
ISO/DIS20163
Vulcanized rubber — Determination of freesulfur by gas chromatography (GC) and highperformance liquid chromatography (HPLC)
ISO/DIS23337
Rubber, vulcanized or thermoplastic —Determination of abrasion resistance using theImproved Lambourn test machine(Revision of ISO 23337:2007)
TC 54 Essential oilsISO/DIS 4730 Essential oil of Melaleuca, terpinen-4-ol type
(Tea Tree oil)(Revision of ISO 4730:2004)
TC 58 Gas cylindersISO/DIS11363-1
Gas cylinders — 17E and 25E taper threadsfor connection of valves to gas cylinders —Part 1: Specifications(Revision of ISO 11363-1:2010, ISO 11363-1:2010/Cor 1:2011, ISO 11363-1:2010/Cor2:2012)
ISO/DIS11363-2
Gas cylinders — 17E and 25E taper threadsfor connection of valves to gas cylinders —Part 2: Inspection gauges
(Revision of ISO 11363-2:2010)
ISO/DIS13769
Gas cylinders — Stamp marking
(Revision of ISO 13769:2007)
TC 61 PlasticsISO/DIS12992
Plastics — Vertical flame spread determinationfor film and sheet(Revision of ISO 12992:1995)
TC 85 Nuclear energy, nuclear technologies,and radiological protection
ISO/DIS18557
Characterisation principles for soils, buildingsand infrastructures contaminated byradionuclides for remediation purposes
TC 106 DentistryISO/DIS20749
Dentistry — Pre-capsulated dental amalgam
ISO/DIS1797.2
Dentistry — Shanks for rotary and oscillatinginstruments(Revision of ISO 1797-2:1992, ISO 1797-1:2011, ISO 1797-3:2013)
TC 107 Metallic and other inorganic coatingsISO/DIS28706-2
Vitreous and porcelain enamels —Determination of resistance to chemicalcorrosion — Part 2: Determination ofresistance to chemical corrosion by boilingacids, boiling neutral liquids, alkaline liquidsand/or their vapours(Revision of ISO 28706-2:2008)
TC 121 Anaesthetic and respiratoryequipment
IEC/DIS80601-2-30
Medical electrical equipment — Part 2-30:Particular requirements for basic safety andessential performance of automated non-invasive sphygmomanometers(Revision of IEC 80601-2-30:2009, IEC 80601-2-30:2009/Amd 1:2013)
ISO/DIS19223
Lung ventilators and related equipment —Vocabulary and semantics
TC 127 Earth-moving machineryISO/DIS20474-1
Earth-moving machinery — Safety — Part 1:General requirements(Revision of ISO 20474-1:2008)
ISO/DIS20474-2
Earth-moving machinery — Safety — Part 2:Requirements for dozers(Revision of ISO 20474-2:2008)
ISO/DIS20474-3
Earth-moving machinery — Safety — Part 3:Requirements for loaders(Revision of ISO 20474-3:2008)
ISO/DIS20474-4
Earth-moving machinery — Safety — Part 4:Requirements for backhoe loaders(Revision of ISO 20474-4:2008)
ISO/DIS20474-5
Earth-moving machinery — Safety — Part 5:Requirements for hydraulic excavators(Revision of ISO 20474-5:2008)
ISO/DIS20474-6
Earth-moving machinery — Safety — Part 6:Requirements for dumpers(Revision of ISO 20474-6:2008)
ISO NORMEN / NORMES ISO33
ISO/DIS20474-7
Earth-moving machinery — Safety — Part 7:Requirements for scrapers(Revision of ISO 20474-7:2008)
ISO/DIS20474-8
Earth-moving machinery — Safety — Part 8:Requirements for graders(Revision of ISO 20474-8:2008)
ISO/DIS20474-9
Earth-moving machinery — Safety — Part 9:Requirements for pipelayers(Revision of ISO 20474-9:2008)
ISO/DIS20474-10
Earth-moving machinery — Safety — Part 10:Requirements for trenchers(Revision of ISO 20474-10:2008)
ISO/DIS20474-11
Earth-moving machinery — Safety — Part 11:Requirements for landfill compactors(Revision of ISO 20474-11:2008)
ISO/DIS20474-12
Earth-moving machinery — Safety — Part 12:Requirements for cable excavators(Revision of ISO 20474-12:2008)
ISO/DIS20474-13
Earth-moving machinery — Safety — Part 13:Requirements for rollers(Revision of ISO 20474-13:2008)
TC 133 Clothing sizing systems - sizedesignation, size measurementmethods and digital fittings
ISO/DIS 5971 Size designation of clothes — Tights(Pantyhose)(Revision of ISO 5971:1981)
TC 135 Non-destructive testingISO/DIS16371-2
Non-destructive testing — Industrial computedradiography with storage phosphor imagingplates — Part 2: General principles for testingof metallic materials using X-rays and gammarays
TC 147 Water qualityISO/DIS13843
Water quality — Requirements for establishingperformance characteristics of quantitativemicrobiological methods(Revision of ISO/TR 13843:2000)
TC 150 Implants for surgeryISO/DIS 5832-7
Implants for surgery — Metallic materials —Part 7: Forgeable and cold-formed cobalt-chromium-nickel-molybdenum-iron alloy(Revision of ISO 5832-7:1994)
ISO/DIS13781.2
Implants for surgery — Homopolymers,copolymers and blends on poly(lactide) — Invitro degradation testing(Revision of ISO 13781:1997, ISO15814:1999)
TC 155 Nickel and nickel alloysISO/DIS 9725 Nickel and nickel alloy forgings
(Revision of ISO 9725:1992)
TC 156 Corrosion of metals and alloysISO/DIS15257.2
Cathodic protection — Competence levels ofcathodic protection persons — Basis for acertification scheme
TC 158 Analysis of gases
ISO/DIS 6145-6
Gas analysis — Preparation of calibration gasmixtures using dynamic methods — Part 6:Critical flow orifices(Revision of ISO 6145-6:2003)
TC 159 ErgonomicsISO/DIS 9241-333
Ergonomics of human-system interaction —Part 333: Stereoscopic displays using glasses
TC 165 Timber structuresISO/DIS 8375 Timber structures — Glued laminated timber
— Test methods for determination of physicaland mechanical properties(Revision of ISO 8375:2009)
TC 172 Optics and photonicsISO/DIS 8980-1
Ophthalmic optics — Uncut finished spectaclelenses — Part 1: Specifications for single-vision and multifocal lenses(Revision of ISO 8980-1:2004, ISO 8980-1:2004/Cor 1:2006)
ISO/DIS 8980-2
Ophthalmic optics — Uncut finished spectaclelenses — Part 2: Specifications for power-variation lenses(Revision of ISO 8980-2:2004, ISO 8980-2:2004/Cor 1:2006)
ISO/DIS11979-8
Ophthalmic implants — Intraocular lenses —Part 8: Fundamental requirements(Revision of ISO 11979-8:2006, ISO 11979-8:2006/Amd 1:2011)
ISO15798:2013/DAmd 1
Ophthalmic implants — Ophthalmicviscosurgical devices — Amendment 1
ISO/DIS21987
Ophthalmic optics — Mounted spectaclelenses(Revision of ISO 21987:2009)
TC 188 Small craftISO15085:2003/DAmd 2.2
Small craft — Man-overboard prevention andrecovery — Amendment 2
TC 190 Soil qualityISO/DIS14239
Soil quality — Laboratory incubation systemsfor measuring the mineralization of organicchemicals in soil under aerobic conditions(Revision of ISO 14239:1997)
TC 204 Intelligent transport systemsISO12813:2015/DAmd 1
Electronic fee collection — Compliance checkcommunication for autonomous systems —Amendment 1
ISO13141:2015/DAmd 1
Electronic fee collection — Localisationaugmentation communication for autonomoussystems — Amendment 1
ISO/DIS15638-9
Intelligent transport systems — Framework forcooperative Telematics Applications forRegulated commercial freight Vehicles (TARV)— Part 9: Remote electronic tachographmonitoring (RTM)
TC 205 Building environment designISO/DIS18566-1
Building environment design — Design, testmethods and control of hydronic radiantheating and cooling panel systems — Part 1:Definition, symbols, technical specificationsand requirements
ISO NORMEN / NORMES ISO34
ISO/DIS18566-2
Building environment design — Design, testmethods and control of hydronic radiantheating and cooling panel systems — Part 2:Determination of heating and cooling capacityof ceiling mounted radiant panels
ISO/DIS18566-3
Building environment design — Design, testmethods and control of hydronic radiantheating and cooling panel systems — Part 3:Design of ceiling mounted radiant panels
ISO/DIS18566-4
Building environment design — Design, testmethods and control of hydronic radiantheating and cooling panel systems — Part 4:Control of ceiling mounted radiant heating andcooling panels
TC 206 Fine ceramicsISO/DIS18753
Fine ceramics (advanced ceramics, advancedtechnical ceramics) — Determination ofabsolute density of ceramic powders bypycnometer(Revision of ISO 18753:2004)
TC 213 Dimensional and geometrical productspecifications and verification
ISO/DIS 5459 Geometrical product specifications (GPS) —Geometrical tolerancing — Datums and datumsystems(Revision of ISO 5459:2011)
ISO/DIS17450-4.2
Geometrical product specifications (GPS) —Basic concepts — Part 4: Geometricalcharacteristics for quantifying GPS deviations
TC 217 CosmeticsISO/DIS29621
Cosmetics — Microbiology — Guidelines forthe risk assessment and identification ofmicrobiologically low-risk products(Revision of ISO 29621:2010)
TC 238 Solid biofuelsISO/DIS19743
Solid biofuels — Determination of content ofheavy extraneous materials large than 3,15mm
TC 249 Traditional chinese medicineISO/DIS19824
Traditional chinese medicine — Schisandrachinensis (Turcz.) baill seeds and seedlings
ISO/DIS20333
Traditional chinese medicine — Coding rulesfor chinese medicines in supply chainmanagement
ISO/DIS20408
Traditional chinese medicine-panaxnotoginseng seeds and seedlings
TC 258 Project, programme and portfoliomanagement
ISO/DIS21505.2
Project, programme and portfolio management— Guidance on governance
JTC 1 Information technologyISO/IEC/IEEEDIS 26513
Systems and software engineering -Requirements for testers and reviewers of userdocumentation(Revision of ISO/IEC 26513:2009)
ISO/IEC 15693-3:2009/DAmd 4
Identification cards — Contactless integratedcircuit cards — Vicinity cards — Part 3:Anticollision and transmission protocol —Amendment 4: Security framework
ISO/IEC18013-4:2011/DAmd1
Information technology — Personalidentification — ISO-compliant driving licence— Part 4: Test methods — Amendment 1:Extended access control v1 & pace
ISO/IEC DIS15938-14
Information technology — Multimedia contentdescription interface — Part 14: Referencesoftware, conformance and usage guidelinesfor compact descriptors for visual search
PROJETS FINALSPériode du 1er mars 2016 au 31 mars 2016.*Actuellement disponible en anglais seulement.
TC 17 SteelISO/FDIS 683-1 Heat-treatable steels, alloy steels and free-
cutting steels — Part 1: Non-alloy steels forquenching and tempering·(Revision of ISO 683-1:2012)
ISO/FDIS 683-2 Heat-treatable steels, alloy steels and free-cutting steels — Part 2: Alloy steels forquenching and tempering(Revision of ISO 683-2:2012)
ISO/FDIS 683-3 Heat-treatable steels, alloy steels and free-cutting steels — Part 3: Case-hardeningsteels(Revision of ISO 683-3:2014)
ISO/FDIS 683-4 Heat-treatable steels, alloy steels and free-cutting steels — Part 4: Free-cutting steels(Revision of ISO 683-4:2014)
TC 24 Particle characterization includingsieving
ISO/FDIS 9044 Industrial woven wire cloth — Technicalrequirements and tests(Revision of ISO 9044:1999)
TC 27 Solid mineral fuelsISO/FDIS 13909-2
Hard coal and coke — Mechanicalsampling — Part 2: Coal — Sampling frommoving streams(Revision of ISO 13909-2:2001)
ISO/FDIS 13909-3
Hard coal and coke — Mechanicalsampling — Part 3: Coal — Sampling fromstationary lots(Revision of ISO 13909-3:2001)
ISO/FDIS 13909-4
Hard coal and coke — Mechanicalsampling — Part 4: Coal — Preparation oftest samples(Revision of ISO 13909-4:2001)
ISO/FDIS 13909-5
Hard coal and coke — Mechanicalsampling — Part 5: Coke — Sampling frommoving streams(Revision of ISO 13909-5:2001)
ISO/FDIS 13909-6
Hard coal and coke — Mechanicalsampling — Part 6: Coke — Preparation oftest samples(Revision of ISO 13909-6:2001)
ISO NORMEN / NORMES ISO35
ISO/FDIS 13909-7
Hard coal and coke — Mechanicalsampling — Part 7: Methods fordetermining the precision of sampling,sample preparation and testing(Revision of ISO 13909-7:2001)
ISO/FDIS 13909-8
Hard coal and coke — Mechanicalsampling — Part 8: Methods of testing forbias(Revision of ISO 13909-8:2001)
TC 36 CinematographyISO/FDIS 7739 Cinematography — Two-track photographic
analogue sound records on 16 mm motion-picture prints — Positions and widthdimensions(Revision of ISO 7739:1983)
TC 43 AcousticsISO/FDIS 362-3 Measurement of noise emitted by
accelerating road vehicles — Engineeringmethod — Part 3: Indoor testing M and Ncategories
TC 45 Rubber and rubber productsISO/FDIS 249 Rubber, raw natural — Determination of dirt
content(Revision of ISO 249:2014)
TC 59 Buildings and civil engineeringworks
ISO/FDIS 11528 Buildings and civil engineering works —Sealants — Determination of crazing andcracking following exposure to artificial ornatural weathering
TC 61 PlasticsISO/FDIS 4590 Rigid cellular plastics — Determination of
the volume percentage of open cells and ofclosed cells(Revision of ISO 4590:2002)
TC 67 Materials, equipment and offshorestructures for petroleum,petrochemical and natural gasindustries
ISO/FDIS 19901-4
Petroleum and natural gas industries —Specific requirements for offshorestructures — Part 4: Geotechnical andfoundation design considerations(Revision of ISO 19901-4:2003)
TC 84 Devices for administration ofmedicinal products and catheters
ISO/FDIS 9626 Stainless steel needle tubing for themanufacture of medical devices —Requirements and test methods(Revision of ISO 9626:1991, ISO9626:1991/Amd 1:2001)
TC 96 CranesISO/FDIS 12480-3
Cranes — Safe use — Part 3: Towercranes(Revision of ISO 12480-3:2005)
ISO/FDIS 11031 Cranes — Principles for seismicallyresistant design
TC 118 Compressors and pneumatic tools,machines and equipment
ISO/FDIS 18740 Turbocompressors — Performance testcode — Simplified acceptance test
TC 131 Fluid power systemsISO/FDIS 5781 Hydraulic fluid power — Pressure-reducing
valves, sequence valves, unloading valves,throttle valves and check valves —Mounting surfaces(Revision of ISO 5781:2000)
ISO/FDIS 7368 Hydraulic fluid power — Two-port slip-incartridge valves — Cavities(Revision of ISO 7368:1989)
TC 134 Fertilizers and soil conditionersISO/FDIS 18642 Fertilizer and soil conditioners — Fertilizer
grade urea — General requirementsTC 149 CyclesISO/FDIS 11243 Cycles — Luggage carriers for bicycles —
Requirements and test methods(Revision of ISO 11243:1994)
TC 172 Optics and photonicsISO/FDIS 10110-9
Optics and photonics — Preparation ofdrawings for optical elements and systems— Part 9: Surface treatment and coating(Revision of ISO 10110-9:1996)
ISO/FDIS 10110-11
Optics and photonics — Preparation ofdrawings for optical elements and systems— Part 11: Non-toleranced data(Revision of ISO 10110-11:1996, ISO10110-11:1996/Cor 1:2006)
ISO/FDIS 18221 Microscopes — Microscopes with digitalimaging displays — Information provided tothe user regarding imaging performance
TC 215 Health informaticsISO/FDIS 27799 Health informatics — Information security
management in health using ISO/IEC27002(Revision of ISO 27799:2008)
TC 238 Solid biofuelsISO/FDIS 16993 Solid biofuels — Conversion of analytical
results from one basis to another(Revision of ISO 16993:2015)
ISO/FDIS 16994 Solid biofuels — Determination of totalcontent of sulfur and chlorine(Revision of ISO 16994:2015)
TC 274 Light and lightingISO/CIE FDIS11664-5
Colorimetry — Part 5: CIE 1976 L*u*v*Colour space and u', v' uniform chromaticityscale diagram(Revision of ISO 11664-5:2009)
JTC 1 Information technologyISO/IEC FDIS33071
Information technology — Processassessment — An integrated processcapability assessment model for Enterpriseprocesses
ISO/IEC/IEEEFDIS 8802-1BA
Information technology —Telecommunications and informationexchange between systems — Local and
ISO NORMEN / NORMES ISO36
metropolitan area networks — Specificrequirements — Part 1BA: Audio videobridging (AVB) systems
ISO/IEC/IEEEFDIS 8802-1BR
Information technology —Telecommunications and informationexchange between systems — Local andmetropolitan area networks — Specificrequirements — Part 1BR: Virtual bridgedlocal area networks — Bridge portextension
ISO/IEC FDIS7816-6.2
Identification cards — Integrated circuitcards — Part 6: Interindustry data elementsfor interchange(Revision of ISO/IEC 7816-6:2004, ISO/IEC7816-6:2004/Cor 1:2006)
ISO/IEC FDIS10373-6
Identification cards — Test methods — Part6: Proximity cards(Revision of ISO/IEC 10373-6:2011,ISO/IEC 10373-6:2011/Amd 1:2012,ISO/IEC 10373-6:2011/Amd 2:2012,ISO/IEC 10373-6:2011/Amd 4:2012,ISO/IEC 10373-6:2011/Amd 3:2012,ISO/IEC 10373-6:2011/Cor 1:2013)
ISO/IEC FDIS29161
Information technology — Data structure —Unique identification for the Internet ofThings
ISO/IEC 19788-2:2011/FDAmd 1
Information technology — Learning,education and training — Metadata forlearning resources — Part 2: Dublin Coreelements — Amendment 1: Non-literalcontent value data elements
NORMES PUBLIEESNouvelles Normes internationales publiées entre le 1er mars2016 et le 31 mars 2016.*Actuellement disponible en anglais seulement.** Version française de la norme publiée précédemment enanglais seulement
IIW International Institute of WeldingISO 14270:2016 Resistance welding — Destructive testing of
welds — Specimen dimensions and procedure formechanized peel testing resistance spot, seamand embossed projection welds
ISO 14272:2016 Resistance welding — Destructive testing ofwelds — Specimen dimensions and procedure forcross tension testing of resistance spot andembossed projection welds
ISO 14273:2016 Resistance welding — Destructive testing ofwelds — Specimen dimensions and procedure fortensile shear testing resistance spot andembossed projection welds
TC 5 Ferrous metal pipes and metallic fittingsISO 16631:2016 Ductile iron pipes, fittings, accessories and their
joints compatible with plastic (PVC or PE) pipingsystems, for water applications and for plasticpipeline connections, repair and replacement
TC 6 Paper, board and pulps
ISO 4046-1:2016 Paper, board, pulps and related terms —Vocabulary — Part 1: Alphabetical index
ISO 4046-2:2016 Paper, board, pulps and related terms —Vocabulary — Part 2: Pulping terminology
ISO 4046-3:2016 Paper, board, pulps and related terms —Vocabulary — Part 3: Paper-making terminology
ISO 4046-4:2016 Paper, board, pulps and related terms —Vocabulary — Part 4: Paper and board gradesand converted products
ISO 4046-5:2016 Paper, board, pulps and related terms —Vocabulary — Part 5: Properties of pulp, paperand board
TC 8 Ships and marine technologyISO 7364:2016 Ships and marine technology — Deck machinery
— Accommodation ladder winchesISO/PAS 19891-1:2016
Ships and marine technology — Specifications forgas detectors intended for use on board ships —Part 1: Portable gas detectors for atmospheretesting of enclosed spaces
ISO 18421:2016 Ships and marine technology — Inland navigationvessels — Lifebuoy housings
TC 10 Technical product documentationISO 16016:2016 Technical product documentation — Protection
notices for restricting the use of documents andproducts
TC 17 SteelISO 11949:2016 Cold-reduced tinmill products — Electrolytic
tinplateISO 11950:2016 Cold-reduced tinmill products — Electrolytic
chromium/chromium oxide-coated steelISO 11951:2016 Cold-reduced tinmill products — BlackplateISO 11970:2016 Specification and qualification of welding
procedures for production welding of steelcastings
ISO 5003:2016 Flat bottom (Vignole) railway rails 43 kg/m andabove
TC 20 Aircraft and space vehiclesISO 10959:2016 Aerospace — MJ threads — GaugingISO 8278:2016 Aerospace series — Hydraulic, pressure
compensated, variable delivery pumps —General requirements
ISO 9206:2016 Aerospace series — Constant displacementhydraulic motors — General specifications
ISO 17546:2016 Space systems — Lithium ion battery for spacevehicles — Design and verification requirements
ISO27875:2010/Amd1:2016
Space systems — Re-entry risk management forunmanned spacecraft and launch vehicle orbitalstages — Amendment 1
TC 21 Equipment for fire protection and firefighting
ISO 14520-1:2015
Gaseous fire-extinguishing systems — Physicalproperties and system design — Part 1: Generalrequirements
TC 22 Road vehiclesISO 13400-4:2016
Road vehicles — Diagnostic communication overInternet Protocol (DoIP) — Part 4: Ethernet-based high-speed data link connector
ISO 27145-4:2016
Road vehicles — Implementation of World-WideHarmonized On-Board Diagnostics (WWH-OBD)communication requirements — Part 4:Connection between vehicle and test equipment
ISO NORMEN / NORMES ISO37
ISO 12103-1:2016
Road vehicles — Test contaminants for filterevaluation — Part 1: Arizona test dust
ISO 15500-3:2012/Amd1:2016
Road vehicles — Compressed natural gas (CNG)fuel system components — Part 3: Check valve— Amendment 1
ISO 15500-4:2012/Amd1:2016
Road vehicles — Compressed natural gas (CNG)fuel system components — Part 4: Manual valve— Amendment 1
ISO 15500-5:2012/Amd1:2016
Road vehicles — Compressed natural gas (CNG)fuel system components — Part 5: Manualcylinder valve — Amendment 1
ISO 15500-6:2012/Amd1:2016
Road vehicles — Compressed natural gas (CNG)fuel system components — Part 6: Automaticvalve — Amendment 1
ISO 15500-9:2012/Amd1:2016
Road vehicles — Compressed natural gas (CNG)fuel system components — Part 9: Pressureregulator — Amendment 1
ISO 15500-13:2012/Amd1:2016
Road vehicles — Compressed natural gas (CNG)fuel system components — Part 13: Pressurerelief device (PRD) — Amendment 1
ISO 15500-14:2012/Amd1:2016
Road vehicles — Compressed natural gas (CNG)fuel system components — Part 14: Excess flowvalve — Amendment 1
ISO 15500-16:2012/Amd1:2016
Road vehicles — Compressed natural gas (CNG)fuel system components — Part 16: Rigid fuelline in stainless steel — Amendment 1
ISO 15500-17:2012/Amd1:2016
Road vehicles — Compressed natural gas (CNG)fuel system components — Part 17: Flexible fuelline — Amendment 1
ISO 15500-18:2012/Amd1:2016
Road vehicles — Compressed natural gas (CNG)fuel system components — Part 18: Filter —Amendment 1
ISO 15500-19:2012/Amd1:2016
Road vehicles — Compressed natural gas (CNG)fuel system components — Part 19: Fittings —Amendment 1
TC 23 Tractors and machinery for agricultureand forestry
ISO 4254-14:2016
Agricultural machinery — Safety — Part 14: Balewrappers
ISO 13860:2016 Machinery for forestry — Forwarders — Terms,definitions and commercial specifications
ISO 18564:2016 Machinery for forestry — Noise test codeTC 27 Solid mineral fuelsISO 7404-1:2016 Methods for the petrographic analysis of coals —
Part 1: VocabularyTC 28 Petroleum products and related products
of synthetic or biological originISO 22854:2016 Liquid petroleum products — Determination of
hydrocarbon types and oxygenates inautomotive-motor gasoline and in ethanol (E85)automotive fuel — Multidimensional gaschromatography method
TC 29 Small toolsISO/TS 13399-309:2016
Cutting tool data representation and exchange —Part 309: Creation and exchange of 3D models— Tool holders for indexable inserts
ISO/TS 13399-311:2016
Cutting tool data representation and exchange —Part 311: Creation and exchange of 3D models— Solid reamers
ISO/TS 13399-405:2016
Cutting tool data representation and exchange —Part 405: Creation and exchange of 3D models— Collets
ISO 10889-2:2016
Tool holders with cylindrical shank — Part 2:Type A, shanks for tool holders of special designs
ISO 10889-3:2016
Tool holders with cylindrical shank — Part 3:Type B with rectangular radial seat
ISO 10889-4:2016
Tool holders with cylindrical shank — Part 4:Type C with rectangular axial seat
ISO 10889-5:2016
Tool holders with cylindrical shank — Part 5:Type D with more than one rectangular seat
ISO 10889-6:2016
Tool holders with cylindrical shank — Part 6:Type E with cylindrical seat
ISO 10889-7:2016
Tool holders with cylindrical shank — Part 7:Type F with taper seat
ISO 3286:2016 Single point cutting tools — Corner radiiISO 3365:2016 Indexable hardmetal (carbide) inserts with wiper
edges, without fixing hole — DimensionsISO 3466:2016 Machine taper pin reamers with parallel shanksISO 3467:2016 Machine taper pin reamers with Morse taper
shanksISO 10145-1:2016
End mills with brazed helical hardmetal tips —Part 1: Dimensions of end mills with parallelshank
ISO 10145-2:2016
End mills with brazed helical hardmetal tips —Part 2: Dimensions of end mills with 7/24 tapershank
TC 30 Measurement of fluid flow in closedconduits
ISO 5167-5:2016 Measurement of fluid flow by means of pressuredifferential devices inserted in circular cross-section conduits running full — Part 5: Conemeters
TC 34 Food productsISO 7304-1:2016 Durum wheat semolina and alimentary pasta —
Estimation of cooking quality of alimentary pastaby sensory analysis — Part 1: Reference method
ISO 19344:2015 Milk and milk products — Starter cultures,probiotics and fermented products —Quantification of lactic acid bacteria by flowcytometry
ISO 27105:2016 Milk and cheese — Determination of hen's eggwhite lysozyme content by high performanceliquid chromatography
ISO 18744:2016 Microbiology of the food chain — Detection andenumeration of Cryptosporidium and Giardia infresh leafy green vegetables and berry fruits
ISO 9936:2016 Animal and vegetable fats and oils —Determination of tocopherol and tocotrienolcontents by high-performance liquidchromatography
ISO 15753:2016 Animal and vegetable fats and oils —Determination of polycyclic aromatichydrocarbons
ISO 13299:2016 Sensory analysis — Methodology — Generalguidance for establishing a sensory profile
ISO 16577:2016 Molecular biomarker analysis — Terms anddefinitions
TC 35 Paints and varnishesISO 7784-1:2016 Paints and varnishes — Determination of
resistance to abrasion — Part 1: Method with
ISO NORMEN / NORMES ISO38
abrasive-paper covered wheels and rotating testspecimen
ISO 7784-2:2016 Paints and varnishes — Determination ofresistance to abrasion — Part 2: Method withabrasive rubber wheels and rotating testspecimen
ISO 7784-3:2016 Paints and varnishes — Determination ofresistance to abrasion — Part 3: Method withabrasive-paper covered wheel and linearlyreciprocating test specimen
ISO 16773-1:2016
Electrochemical impedance spectroscopy (EIS)on coated and uncoated metallic specimens —Part 1: Terms and definitions
ISO 16773-2:2016
Electrochemical impedance spectroscopy (EIS)on coated and uncoated metallic specimens —Part 2: Collection of data
ISO 16773-3:2016
Electrochemical impedance spectroscopy (EIS)on coated and uncoated metallic specimens —Part 3: Processing and analysis of data fromdummy cells
TC 36 CinematographyISO 12612:2016 Cinematography — Interchange of post-
production sprocket-based materialsTC 38 TextilesISO 17751-1:2016
Textiles — Quantitative analysis of cashmere,wool, other specialty animal fibers and theirblends — Part 1: Light microscopy method
ISO 17751-2:2016
Textiles — Quantitative analysis of cashmere,wool, other specialty animal fibers and theirblends — Part 2: Scanning electron microscopymethod
TC 39 Machine toolsISO 23125:2015 Machine tools — Safety — Turning machinesTC 41 Pulleys and belts (including veebelts)ISO 13050:2014 Synchronous belt drives — Metric pitch,
curvilinear profile systems G, H, R and S, beltsand pulleys
TC 42 PhotographyISO/TS 19567-1:2016
Photography — Digital cameras — Texturereproduction measurements — Part 1: Frequencycharacteristics measurements using cyclic pattern
ISO/TS20328:2016
Imaging materials — Lenticular lens sheet —Measurements and specifications of dimensions
ISO 22028-1:2016
Photography and graphic technology — Extendedcolour encodings for digital image storage,manipulation and interchange — Part 1:Architecture and requirements
TC 43 AcousticsISO 1996-1:2016 Acoustics — Description, measurement and
assessment of environmental noise — Part 1:Basic quantities and assessment procedures
ISO 17208-1:2016
Underwater acoustics — Quantities andprocedures for description and measurement ofunderwater sound from ships — Part 1:Requirements for precision measurements indeep water used for comparison purposes
TC 44 Welding and allied processesISO/TR 25901-1:2016
Welding and allied processes — Vocabulary —Part 1: General terms
ISO/TR 25901-3:2016
Welding and allied processes — Vocabulary —Part 3: Welding processes
ISO/TR 25901-4:2016
Welding and allied processes — Vocabulary —Part 4: Arc welding
ISO 17916:2016 Safety of thermal cutting machinesISO 15614-8:2016
Specification and qualification of weldingprocedures for metallic materials — Weldingprocedure test — Part 8: Welding of tubes totube-plate joints
ISO 17662:2016 Welding — Calibration, verification and validationof equipment used for welding, including ancillaryactivities
TC 45 Rubber and rubber productsISO 21561-2:2016
Styrene-butadiene rubber (SBR) —Determination of the microstructure of solution-polymerized SBR — Part 2: FTIR with ATRmethod
TC 46 Information and documentationISO 18461:2016 International museum statisticsTC 51 Pallets for unit load method of materials
handlingISO 8611-2:2011/Amd1:2016
Pallets for materials handling — Flat pallets —Part 2: Performance requirements and selectionof tests — Amendment 1
TC 54 Essential oilsISO 3527:2016 Essential oil of parsley fruits (Petroselinum
sativum Hoffm.)ISO 8896:2016 Essential oil of caraway (Carum carvi L.)TC 60 GearsISO/TR10828:2015
Worm gears — Worm profiles and gear meshgeometry
TC 61 PlasticsISO 13802:2015 Plastics — Verification of pendulum impact-
testing machines — Charpy, Izod and tensileimpact-testing
TC 67 Materials, equipment and offshorestructures for petroleum, petrochemicaland natural gas industries
ISO 19901-1:2015
Petroleum and natural gas industries — Specificrequirements for offshore structures — Part 1:Metocean design and operating considerations
TC 68 Financial servicesISO 9564-4:2016 Financial services — Personal Identification
Number (PIN) management and security — Part4: Requirements for PIN handling in eCommercefor Payment Transactions
ISO 13491-1:2016
Financial services — Secure cryptographicdevices (retail) — Part 1: Concepts, requirementsand evaluation methods
ISO 13491-2:2016
Financial services — Secure cryptographicdevices (retail) — Part 2: Security compliancechecklists for devices used in financialtransactions
TC 79 Light metals and their alloysISO 18762:2016 Tubes of titanium and titanium alloys — Welded
tubes for condensers and heat exchangers —Technical delivery conditions
TC 84 Devices for administration of medicinalproducts and catheters
ISO 8537:2016 Sterile single-use syringes, with or withoutneedle, for insulin
ISO NORMEN / NORMES ISO39
TC 85 Nuclear energy, nuclear technologies,and radiological protection
ISO29661:2012/Amd1:2015
Reference radiation fields for radiation protection— Definitions and fundamental concepts —Amendment 1: Reference point of personaldosemeters
TC 87 CorkISO 2385:2015 Packed cork — Virgin cork, raw reproduction
cork, ramassage, gleanings, burnt cork, boiledreproduction cork and raw corkwaste —Sampling to determine moisture content
ISO 2386:2015 Packed cork — Virgin cork, raw reproductioncork, ramassage, gleanings, burnt cork, boiledreproduction cork and raw corkwaste —Determination of moisture content
TC 89 Wood-based panelsISO 16893:2016 Wood-based panels — ParticleboardTC 94 Personal safety -- Protective clothing
and equipmentISO 16900-6:2015
Respiratory protective devices — Methods of testand test equipment — Part 6: Mechanicalresistance/strength of components andconnections
ISO 16900-9:2015
Respiratory protective devices — Methods of testand test equipment — Part 9: Determination ofcarbon dioxide content of the inhaled gas
ISO 16900-13:2015
Respiratory protective devices — Methods of testand test equipment — Part 13: RPD usingregenerated breathable gas and specialapplication mining escape RPD: Consolidatedtest for gas concentration, temperature, humidity,work of breathing, breathing resistance, elastanceand duration
TC 104 Freight containersISO668:2013/Amd1:2016
Series 1 freight containers — Classification,dimensions and ratings — Amendment 1
ISO668:2013/Amd2:2016
Series 1 freight containers — Classification,dimensions and ratings — Amendment 2
TC 106 DentistryISO 3950:2016 Dentistry — Designation system for teeth and
areas of the oral cavityISO 18739:2016 Dentistry — Vocabulary of process chain for
CAD/CAM systemsTC 107 Metallic and other inorganic coatingsISO 2178:2016 Non-magnetic coatings on magnetic substrates
— Measurement of coating thickness — Magneticmethod
ISO 18535:2016 Diamond-like carbon films — Determination offriction and wear characteristics of diamond-likecarbon films by ball-on-disc method
TC 108 Mechanical vibration, shock andcondition monitoring
ISO 21940-12:2016
Mechanical vibration — Rotor balancing — Part12: Procedures and tolerances for rotors withflexible behaviour
TC 114 HorologyISO 3764:2016 Timekeeping instruments — Movements —
Types, dimensions and nomenclature
TC 115 PumpsISO/ASME14414:2015/Amd1:2016
Pump system energy assessment — Amendment1
TC 127 Earth-moving machineryISO9244:2008/Amd1:2016
Earth-moving machinery — Machine safety labels— General principles — Amendment 1
TC 130 Graphic technologyISO 16763:2016 Graphic technology — Post-press —
Requirements for bound productsTC 134 Fertilizers and soil conditionersISO 18643:2016 Fertilizers and soil conditioners — Determination
of biuret content of urea-based fertilizers —HPLC method
ISO 18645:2016 Fertilizers and soil conditioners — Water solublefertilizer — General requirements
TC 146 Air qualityISO 18158:2016 Workplace air — TerminologyTC 147 Water qualityISO 13165-3:2016
Water quality — Radium-226 — Part 3: Testmethod using coprecipitation and gamma-spectrometry
ISO 19820:2016 Water quality — Determination of the acutetoxicity to the marine rotifer Brachionus plicatilis
TC 150 Implants for surgeryISO 7206-4:2010/Amd1:2016
Implants for surgery — Partial and total hip jointprostheses — Part 4: Determination of enduranceproperties and performance of stemmed femoralcomponents — Amendment 1
TC 159 ErgonomicsISO 27500:2016 The human-centred organization — Rationale
and general principlesTC 160 Glass in buildingISO 16932:2016 Glass in building — Destructive-windstorm-
resistant security glazing — Test andclassification
TC 172 Optics and photonicsISO 10322-1:2016
Ophthalmic optics — Semi-finished spectaclelens blanks — Part 1: Specifications for single-vision and multifocal lens blanks
ISO 10322-2:2016
Ophthalmic optics — Semi-finished spectaclelens blanks — Part 2: Specifications forprogressive-power and degressive-power lensblanks
ISO 10685-2:2016
Ophthalmic optics — Spectacle frames andsunglasses electronic catalogue and identification— Part 2: Commercial information
ISO/TR19498:2015
Ophthalmic optics and instruments — Correlationof optotypes
ISO 14880-1:2016
Optics and photonics — Microlens arrays — Part1: Vocabulary and general properties
TC 173 Assistive products for persons withdisability
ISO 7176-19:2008/Amd1:2015
Wheelchairs — Part 19: Wheeled mobilitydevices for use as seats in motor vehicles —Amendment 1: Annex G
ISO 19028:2016 Accessible design — Information contents,figuration and display methods of tactile guidemaps
ISO NORMEN / NORMES ISO40
TC 181 Safety of toysISO/TR 8124-8:2016
Safety of toys — Part 8: Age determinationguidelines
TC 184 Automation systems and integrationIEC 62264-4:2016
Enterprise-control system integration — Part 4:Objects and attributes for manufacturingoperations management integration
TC 188 Small craftISO 16315:2016 Small craft — Electric propulsion systemTC 201 Surface chemical analysisISO 18554:2016 Surface chemical analysis — Electron
spectroscopies — Procedures for identifying,estimating and correcting for unintendeddegradation by X-rays in a material undergoinganalysis by X-ray photoelectron spectroscopy
TC 204 Intelligent transport systemsISO/TS17426:2016
Intelligent transport systems — Cooperativesystems — Contextual speeds
ISO/TS 21219-9:2016
Intelligent transport systems — Traffic and travelinformation (TTI) via transport protocol expertsgroup, generation 2 (TPEG2) — Part 9: Serviceand network information (TPEG2-SNI)
TC 205 Building environment designISO 16484-6:2014
Building automation and control systems (BACS)— Part 6: Data communication conformancetesting
TC 206 Fine ceramicsISO 18550:2016 Fine ceramics (advanced ceramics, advanced
technical ceramics) — Testing method for macro-heterogeneity in microstructure
TC 207 Environmental managementISO 14021:2016 Environmental labels and declarations — Self-
declared environmental claims (Type IIenvironmental labelling)
TC 210 Quality management and correspondinggeneral aspects for medical devices
ISO 15225:2016 Medical devices — Quality management —Medical device nomenclature data structure
ISO 16142-1:2016
Medical devices — Recognized essentialprinciples of safety and performance of medicaldevices — Part 1: General essential principlesand additional specific essential principles for allnon-IVD medical devices and guidance on theselection of standards
IEC 80369-5:2016
Small-bore connectors for liquids and gases inhealthcare applications — Part 5: Connectors forlimb cuff inflation applications
ISO 80369-6:2016
Small bore connectors for liquids and gases inhealthcare applications — Part 6: Connectors forneuraxial applications
TC 215 Health informaticsISO 13940:2015 Health informatics — System of concepts to
support continuity of careISO 16278:2016 Health informatics — Categorial structure for
terminological systems of human anatomyISO/HL716527:2016
Health informatics — HL7 Personal HealthRecord System Functional Model, Release 1(PHRS FM)
TC 219 Floor coverings
ISO 4918:2016 Resilient, textile and laminate floor coverings —Castor chair test
TC 220 Cryogenic vesselsISO 24490:2016 Cryogenic vessels — Pumps for cryogenic
serviceTC 229 NanotechnologiesISO/TS19337:2016
Nanotechnologies — Characteristics of workingsuspensions of nano-objects for in vitro assays toevaluate inherent nano-object toxicity
ISO/TS 80004-12:2016
Nanotechnologies — Vocabulary — Part 12:Quantum phenomena in nanotechnology
TC 238 Solid biofuelsISO 17827-1:2016
Solid biofuels — Determination of particle sizedistribution for uncompressed fuels — Part 1:Oscillating screen method using sieves withapertures of 3,15 mm and above
ISO 17829:2015 Solid Biofuels — Determination of length anddiameter of pellets
ISO 17830:2016 Solid biofuels — Particle size distribution ofdisintegrated pellets
ISO 18134-2:2015
Solid biofuels — Determination of moisturecontent — Oven dry method — Part 2: Totalmoisture — Simplified method
TC 249 Traditional chinese medicineISO 18668-1:2016
Traditional Chinese medicine — Coding systemfor Chinese medicines — Part 1: Coding rules forChinese medicines
TMBG Technical Management Board - groupsISO/IEC Guide17:2016
Guide for writing standards taking into accountthe needs of micro, small and medium-sizedenterprises
ISO 80079-36:2016
Explosive atmospheres — Part 36: Non-electricalequipment for explosive atmospheres — Basicmethod and requirements
ISO 80079-37:2016
Explosive atmospheres — Part 37: Non-electricalequipment for explosive atmospheres — Non-electrical type of protection constructional safety''c'', control of ignition sources ''b'', liquidimmersion ''k''
JTC 1 Information technologyISO/IEC 11889-1:2015
Information technology — Trusted platformmodule library — Part 1: Architecture
ISO/IEC 16512-1:2016
Information technology — Relayed MulticastControl Protocol (RMCP) — Framework — Part 1:
ISO/IEC 16512-2:2016
Information technology — Relayed multicastprotocol: Specification for simplex groupapplications — Part 2:
ISO/IEC20648:2016
Information technology — TLS specification forstorage systems
ISO/IEC20919:2016
Information technology — Linear Tape FileSystem (LTFS) Format Specification
ISO/IEC40314:2016
Information technology — Mathematical MarkupLanguage (MathML) Version 3.0 2nd Edition
ISO/IEC/IEEE8802-1Q:2016
Information technology — Telecommunicationsand information exchange between systems —Local and metropolitan area networks — Specificrequirements — Part 1Q: Bridges and bridgednetworks
ISO/IEC 13157-2:2016
Information technology — Telecommunicationsand information exchange between systems —
ISO NORMEN / NORMES ISO41
NFC Security — Part 2: NFC-SEC cryptographystandard using ECDH and AES
ISO/IEC 13157-3:2016
Information technology — Telecommunicationsand information exchange between systems —NFC Security — Part 3: NFC-SEC cryptographystandard using ECDH-256 and AES-GCM
ISO/IEC 14443-1:2016
Identification cards — Contactless integratedcircuit cards — Proximity cards — Part 1:Physical characteristics
ISO/IEC TR10182:2016
Information technology — Programminglanguages, their environments and systemsoftware interfaces — Guidelines for languagebindings
ISO/IEC 17760-102:2016
Information technology — AT Attachment — Part102: ATA/ATAPI Command set - 2 (ACS-2)
ISO/IEC 14888-3:2016
Information technology — Security techniques —Digital signatures with appendix — Part 3:Discrete logarithm based mechanisms
ISO/IEC TR19566-1:2016
Information technology — JPEG Systems — Part1: Packaging of information using codestreamsand file formats
ISO/IEC 23005-2:2016
Information technology — Media context andcontrol — Part 2: Control information
ISO/IEC 23005-4:2016
Information technology — Media context andcontrol — Part 4: Virtual world objectcharacteristics
ISO/IEC 23005-5:2016
Information technology — Media context andcontrol — Part 5: Data formats for interactiondevices
ISO/IEC 23005-6:2016
Information technology — Media context andcontrol — Part 6: Common types and tools
ISO/IEC 23008-3:2015
Information technology — High efficiency codingand media delivery in heterogeneousenvironments — Part 3: 3D audio
ISO/IEC 23008-5:2015/Amd1:2016
Information technology — High efficiency codingand media delivery in heterogeneousenvironments — Part 5: Reference software forhigh efficiency video coding — Amendment 1:Reference software for format range extensionsprofiles
ISO/IEC 24752-2:2014
Information technology — User interfaces —Universal remote console — Part 2: Userinterface socket description
ISO/IEC 30106-1:2016
Information technology — Object oriented BioAPI— Part 1: Architecture
ISO/IEC 30106-2:2016
Information technology — Object oriented BioAPI— Part 2: Java implementation
ISO/IEC 30106-3:2016
Information technology — Object oriented BioAPI— Part 3: C# implementation
ISO/IEC 30134-1:2016
Information technology — Data centres — Keyperformance indicators — Part 1: Overview andgeneral requirements
NORMES CONFIRMEESLes Normes internationales suivantes sont confirmées pour cinqans:
TC 6 Paper, board and pulpsISO 4119:1995 (reconfirmed)ISO 9184-1:1990 (reconfirmed)
ISO 9184-2:1990 (reconfirmed)ISO 9184-3:1990 (reconfirmed)ISO 9184-4:1990 (reconfirmed)ISO 9184-5:1990 (reconfirmed)ISO 15360-1:2000
(reconfirmed)
ISO 15361:2000 (reconfirmed)ISO 2493-1:2010
ISO 12625-8:2010TC 20 Aircraft and space vehiclesISO 15893:2010
ISO 22538-1:2007
(reconfirmed)
ISO 22538-2:2007
(reconfirmed)
ISO 22538-3:2007
(reconfirmed)
ISO 22538-4:2007
(reconfirmed)
ISO 23339:2010
TC 21 Equipment for fire protection and firefighting
ISO 7240-20:2010TC 23 Tractors and machinery for agriculture
and forestryISO 6534:2007 (reconfirmed)ISO 7914:2002 (reconfirmed)ISO 8334:2007 (reconfirmed)ISO 12188-1:2010TC 28 Petroleum products and related
products of synthetic or biologicalorigin
ISO 6743-10:1989
(reconfirmed)
ISO 6743-11:1990
(reconfirmed)
ISO 6743-12:1989
(reconfirmed)
ISO 6743-14:1994
(reconfirmed)
ISO 6743-15:2007
(reconfirmed)
ISO 7745:2010
ISO 8216-2:1986 (reconfirmed)ISO 12924:2010
ISO/TS12927:1999
(reconfirmed)
ISO/TS12928:1999
(reconfirmed)
ISO 13738:2011
ISO 24254:2007 (reconfirmed)TC 29 Small toolsISO/TS 13399-150:2008
(reconfirmed)
ISO 8018:2007 (reconfirmed)TC 34 Food products
ISO NORMEN / NORMES ISO42
ISO 27608:2010
TC 35 Paints and varnishesISO 7142:2007 (reconfirmed)ISO 7143:2007 (reconfirmed)ISO 10283:2007 (reconfirmed)ISO 11909:2007 (reconfirmed)ISO 19334:2010
TC 37 Terminology and other language andcontent resources
ISO 860:2007
TC 38 TextilesISO 858:1973 (reconfirmed)ISO 1531:1973 (reconfirmed)ISO 1532:1973 (reconfirmed)ISO 3505:1975 (reconfirmed)ISO 9073-18:2007
(reconfirmed)
ISO 105-F06:2000
(reconfirmed)
ISO 105-X18:2007
(reconfirmed)
ISO 30023:2010
TC 41 Pulleys and belts (including veebelts)ISO 252:2007 (reconfirmed)ISO 583:2007 (reconfirmed)TC 43 AcousticsISO 3822-1:1999 (reconfirmed)ISO 3822-2:1995 (reconfirmed)ISO 15186-1:2000
(reconfirmed)
TC 44 Welding and allied processesISO 693:1982 (reconfirmed)ISO 5183-2:2000 (reconfirmed)ISO 8167:1989 (reconfirmed)ISO 9313:1989 (reconfirmed)ISO 18594:2007 (reconfirmed)ISO 18595:2007 (reconfirmed)ISO 5179:1983 (reconfirmed)ISO 9455-1:1990 (reconfirmed)ISO 9455-3:1992 (reconfirmed)ISO 9455-6:1995 (reconfirmed)TC 47 ChemistryISO 78-2:1999 (reconfirmed)ISO 759:1981 (reconfirmed)ISO 760:1978 (reconfirmed)ISO 2211:1973 (reconfirmed)ISO 6227:1982 (reconfirmed)TC 54 Essential oilsISO 1272:2000 (reconfirmed)ISO 3214:2000 (reconfirmed)ISO 10869:2010
TC 67 Materials, equipment and offshorestructures for petroleum,petrochemical and natural gasindustries
ISO 17078-4:2010ISO 28781:2010
TC 69 Applications of statistical methodsISO 11462-2:2010ISO 3951-3:2007 (reconfirmed)TC 70 Internal combustion enginesISO 7967-2:2010
TC 85 Nuclear energy, nuclear technologies,and radiological protection
ISO 8529-2:2000 (reconfirmed)ISO 8529-3:1998 (reconfirmed)ISO 26802:2010
TC 86 Refrigeration and air-conditioningISO/TS16491:2012TC 89 Wood-based panelsISO 16894:2009
ISO 2074:2007 (reconfirmed)TC 91 Surface active agentsISO 1063:1974 (reconfirmed)ISO 1064:1974 (reconfirmed)ISO 1065:1991 (reconfirmed)ISO 1066:1975 (reconfirmed)ISO 1067:1974 (reconfirmed)ISO 1104:1977 (reconfirmed)ISO 2131:1972 (reconfirmed)ISO 2174:1990 (reconfirmed)ISO 2267:1986 (reconfirmed)ISO 2268:1972 (reconfirmed)ISO 2270:1989 (reconfirmed)ISO 2271:1989 (reconfirmed)ISO 2272:1989 (reconfirmed)ISO 8022:1990 (reconfirmed)TC 94 Personal safety -- Protective clothing
and equipmentISO 12609-1:2013ISO 12609-2:2013ISO 13997:1999 (reconfirmed)ISO 14460:1999 (reconfirmed)TC 98 Bases for design of structuresISO 13822:2010
TC 102 Iron ore and direct reduced ironISO 10835:2007 (reconfirmed)TC 106 DentistryISO 27020:2010
TC 107 Metallic and other inorganic coatingsISO 4534:2010
ISO 12690:2010
ISO 14921:2010
ISO 28762:2010
TC 108 Mechanical vibration, shock andcondition monitoring
ISO 7626-5:1994 (reconfirmed)ISO 9688:1990 (reconfirmed)ISO 6070:1981 (reconfirmed)TC 113 Hydrometry
ISO NORMEN / NORMES ISO43
ISO 2425:2010
TC 118 Compressors and pneumatic tools,machines and equipment
ISO 28927-4:2010TC 119 Powder metallurgyISO 28279:2010
TC 121 Anaesthetic and respiratory equipmentISO 15001:2010
TC 130 Graphic technologyISO 2846-2:2007 (reconfirmed)ISO 12640-3:2007
(reconfirmed)
ISO 12643-5:2010ISO 15076-1:2010TC 131 Fluid power systemsISO 3662:1976 (reconfirmed)ISO 4391:1983 (reconfirmed)ISO 3601-3:2005 (reconfirmed)ISO 5597:2010
ISO 7425-1:1988 (reconfirmed)ISO 7425-2:1989 (reconfirmed)TC 135 Non-destructive testingISO 5580:1985 (reconfirmed)ISO 12721:2000 (reconfirmed)ISO/TS11774:2011TC 138 Plastics pipes, fittings and valves for
the transport of fluidsISO 1167-3:2007 (reconfirmed)ISO 1167-4:2007 (reconfirmed)ISO 7245:1984 (reconfirmed)ISO 7246:1984 (reconfirmed)ISO 12091:1995 (reconfirmed)ISO 13478:2007 (reconfirmed)ISO 13924:2000 (reconfirmed)ISO 15853:1999 (reconfirmed)ISO/TS16479:2012ISO 18373-1:2007
(reconfirmed)
TC 146 Air qualityISO 11771:2010
TC 147 Water qualityISO 8466-1:1990 (reconfirmed)ISO 9377-2:2000 (reconfirmed)ISO 10695:2000 (reconfirmed)ISO/TS13530:2009
(reconfirmed)
ISO 15089:2000 (reconfirmed)ISO 15682:2000 (reconfirmed)ISO 15913:2000 (reconfirmed)ISO 6461-1:1986 (reconfirmed)ISO 7899-1:1998 (reconfirmed)ISO 7899-2:2000 (reconfirmed)ISO 9308-3:1998 (reconfirmed)
ISO 10705-2:2000
(reconfirmed)
ISO/TS12869:2012ISO 7346-1:1996 (reconfirmed)ISO 7346-2:1996 (reconfirmed)ISO 7827:2010
ISO 19493:2007 (reconfirmed)ISO/TS 23893-2:2007
(reconfirmed)
ISO 5667-1:2006 (reconfirmed)ISO 5667-21:2010TC 157 Non-systemic contraceptives and STI
barrier prophylacticsISO 29941:2010
TC 159 ErgonomicsISO 9241-129:2010TC 171 Document management applicationsISO 3272-4:1994 (reconfirmed)ISO 6198:1993 (reconfirmed)ISO 7565:1993 (reconfirmed)ISO 10197:1993 (reconfirmed)ISO 10594:2006 (reconfirmed)ISO 11142:2005 (reconfirmed)ISO 10244:2010
ISO 12029:2010
TC 172 Optics and photonicsISO 9336-1:2010
ISO 8980-4:2006 (reconfirmed)ISO 10939:2007 (reconfirmed)ISO 11986:2010
ISO 12866:1999 (reconfirmed)ISO 14534:2011
ISO 15004-1:2006
(reconfirmed)
TC 173 Assistive products for persons withdisability
ISO 11199-2:2005
(reconfirmed)
ISO 11199-3:2005
(reconfirmed)
ISO 11334-1:2007
(reconfirmed)
TC 178 Lifts, escalators and moving walksISO 8383:1985 (reconfirmed)TC 184 Automation systems and integrationISO/TS 10303-25:2005
(reconfirmed)
ISO/TS 10303-325:2004
(reconfirmed)
ISO/TS 10303-421:2005
(reconfirmed)
ISO/TS 10303-1019:2006
(reconfirmed)
ISO/TS 10303-1020:2006
(reconfirmed)
ISO NORMEN / NORMES ISO44
ISO/TS 10303-1038:2006
(reconfirmed)
ISO/TS 10303-1040:2008
(reconfirmed)
ISO/TS 10303-1046:2006
(reconfirmed)
TC 190 Soil qualityISO 10693:1995 (reconfirmed)ISO 10694:1995 (reconfirmed)ISO 11048:1995 (reconfirmed)ISO 11261:1995 (reconfirmed)ISO 11263:1994 (reconfirmed)ISO 11265:1994 (reconfirmed)ISO 11466:1995 (reconfirmed)ISO 13536:1995 (reconfirmed)ISO/TS 14256-1:2003
(reconfirmed)
ISO 15178:2000 (reconfirmed)ISO 15192:2010
ISO 20280:2007 (reconfirmed)ISO 11266:1994 (reconfirmed)TC 205 Building environment designISO 16484-1:2010TC 219 Floor coveringsISO 10834:1992 (reconfirmed)TC 221 GeosyntheticsISO/TS13434:2008TC 232 Learning services outside formal
educationISO 29990:2010
JTC 1 Information technologyISO/IEC 24727-6:2010ISO/IEC24702:2006ISO/IEC 13250-6:2010
NORMES ANNULEESPériode du 1er mars 2016 au 31 mars 2016.
TC 20 Aircraft and space vehiclesISO 12333:2000 (replaced by ISO 9206:2016)ISO 12334:2000 (replaced by ISO 8278:2016)TC 22 Road vehiclesISO 7750-1:1992 (replaced by )ISO 10997:1996 (replaced by )TC 26 Copper and copper alloysISO 1553:1976 (replaced by )ISO 2543:1973 (replaced by )ISO 3110:1975 (replaced by )ISO 4740:1985 (replaced by )TC 34 Food productsISO 7304:1985 (replaced by ISO 7304-2:2008, ISO 7304-
1:2016)
ISO/TS27105:2009
(replaced by ISO 27105:2016)
TC 43 AcousticsISO/PAS 17208-1:2012
(replaced by ISO 17208-1:2016)
TC 44 Welding and allied processesISO 857-1:1998 (replaced by ISO/TR 25901-3:2016)ISO/TR25901:2007
(replaced by ISO/TR 25901-1:2016, ISO/TR25901-3:2016, ISO/TR 25901-4:2016)
TC 45 Rubber and rubber productsISO 21561:2005 (replaced by ISO 21561-2:2016, ISO 21561-
1:2015)ISO21561:2005/Amd1:2010
(replaced by ISO 21561-2:2016, ISO 21561-1:2015)
TC 60 GearsISO 1340:1976 (replaced by )ISO 1341:1976 (replaced by )ISO 8579-2:1993 (replaced by )TC 68 Financial servicesISO/TR 9564-4:2004
(replaced by ISO 9564-4:2016)
TC 72 Textile machinery and accessoriesISO 6170:1999 (replaced by )TC 79 Light metals and their alloysISO 7773:1983 (replaced by )TC 85 Nuclear energy, nuclear technologies,
and radiological protectionISO 12794:2000 (replaced by )TC 92 Fire safetyISO/TS16733:2006
(replaced by ISO 16733-1:2015)
TC 108 Mechanical vibration, shock andcondition monitoring
ISO 11342:1998 (replaced by ISO 21940-12:2016)TC 131 Fluid power systemsISO 5596:1999 (replaced by )TC 138 Plastics pipes, fittings and valves for
the transport of fluidsISO 14828:2003 (replaced by )
ISO NORMEN / NORMES ISO45
Le NBN se charge de vous procurer toutespublications Internationales moyennantremboursement de ses frais.Veuillez bien préciser lors de votre commande laversion linguistique désirée, d’avance merci.Nous vous rappelons que tout document peut aussi êtreconsulté en notre bibliothèque, les jours ouvrables de 9:00à 16:00, le vendredi de 9:00 à 13:00.
INTERNATIONALORGANISATION FORSTANDARDIZATION
Nouvelles publicationsNieuwe publicaties
Les documents ISO existent en anglais et en françaisDe ISO-documenten bestaan in het Engels en in hetFrans.
Het NBN bezorgt U alle internationale publicaties, mitsterugbetaling van de kosten.Gelieve bij uw bestelling de gewenste taalkundigeversie te preciseren, dank U bij voorbaat.Elk document kan ook geraadpleegd worden in onzebibliotheek, op werkdagen van 9:00 tot 16:00, op vrijdagvan 9:00 tot 13:00.
PROJETS DE NORMES DIFFUSESPériode du 1er avril 2016 au 30 avril 2016.*Actuellement disponible en anglais seulement.
TC 4 Rolling bearingsISO/DIS 20015 Spherical plain bearings — Method for the
calculation of static and dynamic load ratingsTC 5 Ferrous metal pipes and metallic
fittingsISO/DIS 8179-1 Ductile iron pipes, fittings, accessories and
valves — Part 1: Metallic zinc based coatings(Revision of ISO 8179-1:2004)
ISO/DIS 8179-2 Ductile iron pipes, fittings, accessories andvalves external zinc based coatings. — Part 2:Zinc rich paint coating(Revision of ISO 8179-2:1995)
TC 6 Paper, board and pulpsISO/DIS 11480 Pulp, paper and board — Determination of
total chlorine and organically bound chlorine(Revision of ISO 11480:1997)
TC 8 Ships and marine technologyIEC/IEEE DIS
80005-1Utility connections in port — Part 1: HighVoltage Shore Connection (HVSC) Systems —General requirements(Revision of ISO/IEC/IEEE 80005-1:2012)
TC 20 Aircraft and space vehiclesISO
2635:2003/DAmd 1
Aircraft — Conductors for general purposeaircraft electrical cables and aerospaceapplications — Dimensions and characteristics— Amendment 1: Correction of table 1
ISO/DIS 15872 Aerospace — UNJ threads — Gauging(Revision of ISO 15872:2002)
ISO/DIS 18170 Aerospace series — AC induction electricmotor driven, variable delivery, hydraulicpumps — General requirements
ISO/DIS 18387 Aerospace — Linear hydraulic utility actuator— General specifications
TC 22 Road vehiclesISO/DIS 26021-
2Road vehicles — End-of-life activation of on-board pyrotechnic devices — Part 2:Communication requirements(Revision of ISO 26021-2:2008, ISO 26021-2:2008/Cor 1:2009)
ISO NORMEN / NORMES ISO46
ISO/DIS 6626-3.2
Internal combustion engines — Piston rings —Part 3: Coil-spring-loaded oil control ringsmade of steel(Revision of ISO 6626-3:2008)
ISO/DIS 12619-6
Road vehicles — Compressed gaseoushydrogen (CGH2) and hydrogen/natural gasblend fuel system components — Part 6:Automatic valve
ISO/DIS 19723-1
Road vehicles — Liquefied natural gas (LNG)fuel systems — Part 1: Safety requirements
ISO/DIS 19723-2
Road vehicles — Liquefied natural gas (LNG)fuel systems — Part 2: Test methods
TC 23 Tractors and machinery for agricultureand forestry
ISO/DIS 8437-1 Snow throwers — Safety requirements andtest procedures — Part 1: Terminology andcommon tests(Revision of ISO 8437:1989, ISO8437:1989/Amd 1:1997)
ISO/DIS 8437-2 Snow throwers — Safety requirements andtest procedures — Part 2: Pedestriancontrolled snow throwers(Revision of ISO 8437:1989, ISO8437:1989/Amd 1:1997)
ISO/DIS 8437-3 Snow throwers — Safety requirements andtest procedures — Part 3: Ride-on snowthrowers(Revision of ISO 8437:1989, ISO8437:1989/Amd 1:1997)
ISO/DIS 8437-4 Snow throwers — Safety requirements andtest procedures — Part 4: Information onnational and regional provisions(Revision of ISO 8437:1989, ISO8437:1989/Amd 1:1997)
ISO 11681-2:2011/DAmd1
Machinery for forestry — Portable chain-sawsafety requirements and testing — Part 2:Chain-saws for tree service — Amendment 1
TC 27 Solid mineral fuelsISO/DIS 1213-2 Solid mineral fuels — Vocabulary — Part 2:
Terms relating to sampling, testing andanalysis(Revision of ISO 1213-2:1992)
TC 29 Small toolsISO/DIS 1832 Indexable inserts for cutting tools —
Designation(Revision of ISO 1832:2012)
ISO/DIS 2725-1 Assembly tools for screws and nuts — Squaredrive sockets — Part 1: Hand-operatedsockets(Revision of ISO 2725-1:2015)
ISO/DIS 2725-2 Assembly tools for screws and nuts — Squaredrive sockets — Part 2: Machine-operatedsockets ("impact")(Revision of ISO 2725-2:2015)
ISO/DIS 2725-3 Assembly tools for screws and nuts — Squaredrive sockets — Part 3: Machine-operatedsockets ("non-impact")(Revision of ISO 2725-3:2015)
TC 34 Food productsISO/DIS 21294 Oilseeds — Manual or automatic
discontinuous sampling(Revision of ISO 542:1990)
ISO/DIS 6658 Sensory analysis — Methodology — Generalguidance(Revision of ISO 6658:2005)
TC 35 Paints and varnishesISO/DIS 11997-
1.2Paints and varnishes — Determination ofresistance to cyclic corrosion conditions —Part 1: Wet (salt fog)/dry/humidity(Revision of ISO 11997-1:2005)
ISO/DIS 15110 Paints and varnishes — Artificial weatheringincluding acidic deposition(Revision of ISO 15110:2013)
TC 37 Terminology and other language andcontent resources
ISO/DIS18587.2
Translation services — Post-editing ofmachine translation output — Requirements
TC 43 AcousticsISO/DIS 532-1 Acoustics — Methods for calculating loudness
— Part 1: Zwicker method(Revision of ISO 532:1975)
ISO/DIS 532-2 Acoustics — Methods for calculating loudness— Part 2: Moore-Glasberg method(Revision of ISO 532:1975)
TC 44 Welding and allied processesISO/DIS 18278-
3Resistance welding — Weldability — Part 3:Evaluation procedures for weldability in spotweld bonding
ISO/DIS 17279-1
Welding — Micro joining of 2nd generationhigh temperature superconductors — Part 1:General requirements for the procedure
ISO/DIS 17279-2
Welding — Micro joining of 2nd generationhigh temperature superconductors — Part 2:Qualification for welding and testing personnel
TC 45 Rubber and rubber productsISO/DIS 6472 Rubber compounding ingredients —
Abbreviated terms(Revision of ISO 6472:2010)
ISO/DIS 10638 Rubber — Identification of antidegradants bygas chromatography/mass spectrometry(Revision of ISO 10638:2010)
ISO/DIS 19983 Rubber — Determination of precision of testmethods
ISO/DIS 1795 Rubber, raw natural and raw synthetic —Sampling and further preparative procedures(Revision of ISO 1795:2007)
ISO NORMEN / NORMES ISO47
ISO/DIS 11236 Rubber compounding ingredients — p-Phenylenediamine (PPD) antidegradants —Test methods(Revision of ISO 11236:2000, ISO11236:2000/Cor 1:2006)
ISO/DIS 20437 Natural rubber latex cleanroom gloves —Specification
TC 46 Information and documentationISO/DIS 3901 Information and documentation —
International Standard Recording Code (ISRC)(Revision of ISO 3901:2001)
TC 54 Essential oilsISO/DIS 20809 Essential oil of cypress (Cupressus
sempervirens L.)TC 59 Buildings and civil engineering worksISO/DIS 6707-3 Buildings and civil engineering works -
Vocabulary — Part 3: Sustainability termsTC 61 PlasticsISO/DIS 16620-
4.2Plastics — Biobased content — Part 4:Determination of the biobased mass content
ISO/DIS 19699-1
Plastics — Superabsorbent polymer —Sodium polyacrylate resin for absorbing blood— Part 1: Test methods
ISO/DIS 19699-2
Plastics — Superabsorbent polymer —Sodium polyacrylate resin for absorbing blood— Part 2: Specifications
TC 67 Materials, equipment and offshorestructures for petroleum,petrochemical and natural gasindustries
ISO/DIS 21809-5
Petroleum and natural gas industries —External coatings for buried or submergedpipelines used in pipeline transportationsystems — Part 5: External concrete coatings(Revision of ISO 21809-5:2010)
TC 68 Financial servicesISO/DIS 20275 Financial services — Entity legal forms (ELF)TC 71 Concrete, reinforced concrete and pre-
stressed concreteISO/DIS 19595 Natural aggregates for concreteISO/DIS 13315-
4Environmental management for concrete andconcrete structures — Part 4: Environmentaldesign of concrete structures
TC 76 Transfusion, infusion and injection,and blood processing equipment formedical and pharmaceutical use
ISO/DIS 8536-6 Infusion equipment for medical use — Part 6:Freeze drying closures for infusion bottles(Revision of ISO 8536-6:2009)
TC 77 Products in fibre reinforced cementISO/DIS 8336 Fibre-cement flat sheets — Product
specification and test methods(Revision of ISO 8336:2009)
TC 84 Devices for administration ofmedicinal products and catheters
ISO/DIS 11608-6
Needle-based injection systems for medicaluse — Requirements and test methods — Part6: On-body delivery systems
TC 85 Nuclear energy, nuclear technologies,and radiological protection
ISO/DIS 19581 Measurement of radioactivity — Gammaemitting radionuclides — Rapid test methodusing NaI(Tl) gamma-ray spectrometry
TC 86 Refrigeration and air-conditioningISO/DIS 14903 Refrigerating systems and heat pumps —
Qualification of tightness of components andjoints(Revision of ISO 14903:2012)
TC 92 Fire safetyISO/DIS 13943 Fire safety — Vocabulary
(Revision of ISO 13943:2008)
ISO/DIS 3008-2 Fire-resistance tests — Part 2: Lift landingdoor assemblies(Revision of ISO 3008-2:2014)
TC 98 Bases for design of structuresISO/DIS 3010 Bases for design of structures — Seismic
actions on structures(Revision of ISO 3010:2001)
TC 106 DentistryISO/DIS 22112 Dentistry — Artificial teeth for dental
prostheses(Revision of ISO 22112:2005)
ISO/DIS 14457 Dentistry — Handpieces and motors(Revision of ISO 14457:2012)
TC 107 Metallic and other inorganic coatingsISO/DIS 2360 Non-conductive coatings on non-magnetic
electrically conductive base metals —Measurement of coating thickness —Amplitude-sensitive eddy-current method(Revision of ISO 2360:2003)
ISO/DIS 2081 Metallic and other inorganic coatings —Electroplated coatings of zinc withsupplementary treatments on iron or steel(Revision of ISO 2081:2008)
ISO/DIS 2082 Metallic and other inorganic coatings —Electroplated coatings of cadmium withsupplementary treatments on iron or steel(Revision of ISO 2082:2008)
ISO/DIS 27830 Metallic and other inorganic coatings —Guidelines for specifying metallic andinorganic coatings(Revision of ISO 27830:2008)
ISO/DIS 9717 Metallic and other inorganic coatings —Phosphate conversion coating of metals(Revision of ISO 9717:2010)
ISO NORMEN / NORMES ISO48
TC 113 HydrometryISO/DIS 1438 Hydrometry — Open channel flow
measurement using thin-plate weirs(Revision of ISO 1438:2008, ISO1438:2008/Cor 1:2008)
ISO/DIS 18481 Hydrometry — Liquid flow measurement usingend depth method in channels with a freeoverfall(Revision of ISO 3847:1977, ISO 4371:1984)
TC 127 Earth-moving machineryISO/DIS 10987-
2Earth-moving machinery — Sustainability —Part 2: Remanufacturing
ISO/DIS 10987-3
Earth-moving machinery — Sustainability —Part 3: Used machines
ISO/DIS 16001 Earth-moving machinery — Object detectionsystems and visibility aids — Performancerequirements and tests(Revision of ISO 16001:2008)
TC 134 Fertilizers and soil conditionersISO/DIS 21263 Determination of release rate of nutrientsTC 135 Non-destructive testingISO/DIS 15708-
1Non-destructive testing — Radiation methods— Computed tomography — Part 1: Principle,equipment and samples(Revision of ISO 15708-1:2002)
ISO/DIS 15708-2
Non-destructive testing - Radiation methods —Computed Tomography — Part 2: Operationand interpretation(Revision of ISO 15708-2:2002)
ISO/DIS 15708-3
Non-destructive testing — Radiation methods— Computed tomography — Part 3:Terminology
ISO/DIS 15708-4
Non-destructive testing — Radiation methods— Computed tomography — Part 4:Qualification
TC 147 Water qualityISO/DIS 20227 Water quality — Determination of the growth
inhibition effects of waste waters, naturalwaters and chemicals on the duckweedSpirodela polyrhiza — Method using a stockculture independent microbiotest
TC 150 Implants for surgeryISO/DIS 8637-1 Extracorporeal systems for blood purification
— Part 1: Haemodialysers, haemodiafilters,haemofilters and haemoconcentrators(Revision of ISO 8637:2010, ISO8637:2010/Amd 1:2013)
ISO/DIS 8637-2 Extracorporeal systems for blood purification— Part 2: Extracorporeal blood circuit forhaemodialysers, haemodiafilters andhaemofilters(Revision of ISO 8638:2010)
ISO/DIS 8637-3 Extracorporeal systems for blood purification— Part 3: Plasmafilters
(Revision of ISO 13960:2010)
TC 156 Corrosion of metals and alloysISO/DIS 18897 Corrosion of metals and alloys — Standard
test method for particle-free erosion corrosionof metallic materials by jet-in-slit
TC 158 Analysis of gasesISO/DIS 12963 Gas analysis — Comparison methods for the
determination of the composition of gasmixtures based on one- and two-pointcalibration
TC 159 ErgonomicsISO/DIS 7250-1 Basic human body measurements for
technological design — Part 1: Bodymeasurement definitions and landmarks(Revision of ISO 7250-1:2008)
TC 164 Mechanical testing of metalsISO/DIS 6506-2 Metallic materials — Brinell hardness test —
Part 2: Verification and calibration of testingmachines(Revision of ISO 6506-2:2014)
TC 171 Document management applicationsISO/DIS 22938 Document management — Electronic
content/document management (CDM) datainterchange format(Revision of ISO 22938:2008)
TC 172 Optics and photonicsISO/DIS 10110-
7Optics and photonics — Preparation ofdrawings for optical elements and systems —Part 7: Surface imperfections(Revision of ISO 10110-7:2008)
ISO/DIS 14997 Optics and photonics — Test methods forsurface imperfections of optical elements(Revision of ISO 14997:2011)
ISO/DIS 18369-1
Ophthalmic optics — Contact lenses — Part 1:Vocabulary, classification system andrecommendations for labelling specifications(Revision of ISO 18369-1:2006, ISO 18369-1:2006/Amd 1:2009)
ISO/DIS 18369-2
Ophthalmic optics — Contact lenses — Part 2:Tolerances(Revision of ISO 18369-2:2012)
ISO/DIS 18369-3
Ophthalmic optics — Contact lenses — Part 3:Measurement methods(Revision of ISO 18369-3:2006)
ISO/DIS 18369-4
Ophthalmic optics — Contact lenses — Part 4:Physicochemical properties of contact lensmaterials(Revision of ISO 18369-4:2006)
TC 173 Assistive products for persons withdisability
ISO/DIS 15621 Absorbent incontinence aids for urine and/orfaeces — General guidelines on evaluation
ISO NORMEN / NORMES ISO49
(Revision of ISO 15621:2011)
TC 180 Solar energyISO/DIS 9806 Solar energy — Solar thermal collectors —
Test methods(Revision of ISO 9806:2013)
TC 181 Safety of toysISO 8124-
1:2014/DAmd1.2
Safety of toys — Part 1: Safety aspects relatedto mechanical and physical properties —Amendment 1: Cords
ISO 8124-1:2014/DAmd2
Safety of toys — Part 1: Safety aspects relatedto mechanical and physical properties —Amendment 2: Various
ISO 8124-1:2014/DAmd3
Safety of toys — Part 1: Safety aspects relatedto mechanical and physical properties —Amendment 3: Warnings and fibrous fillingmaterial
ISO 8124-1:2014/DAmd4
Safety of toys — Part 1: Safety aspects relatedto mechanical and physical properties —Amendment 4: Acoustics
TC 184 Automation systems and integrationISO/DIS 15746-
2Automation systems and integration —Integration of advanced process control andoptimization capabilities for manufacturingsystems — Part 2: Activity models andinformation exchange
TC 190 Soil qualityISO/DIS 19258 Soil quality — Guidance on the determination
of background values(Revision of ISO 19258:2005)
TC 195 Building construction machinery andequipment
ISO/DIS 19720-1
Building construction machinery andequipment — Plants for the preparation ofconcrete and mortar — Part 1: Terminologyand commercial specifications
TC 198 Sterilization of health care productsISO/DIS 17664 Processing of health care products —
Information to be provided by the medicaldevice manufacturer for the processing ofmedical devices(Revision of ISO 17664:2004)
TC 206 Fine ceramicsISO/DIS 17168-
1Fine ceramics (advanced ceramics, advancedtechnical ceramics) — Test method for air-purification performance of semiconductingphotocatalytic materials under indoor lightingenvironment — Part 1: Removal of nitric oxide
ISO/DIS 17168-2
Fine ceramics (advanced ceramics, advancedtechnical ceramics) — Test method for air-purification performance of semiconductingphotocatalytic materials under indoor lightingenvironment — Part 2: Removal ofacetaldehyde
ISO/DIS 17168-3
Fine ceramics (advanced ceramics, advancedtechnical ceramics) — Test method for air-purification performance of semiconductingphotocatalytic materials under indoor lightingenvironment — Part 3: Removal of toluene
ISO/DIS 17168-4
Fine ceramics (advanced ceramics, advancedtechnical ceramics) — Test method for air-purification performance of semiconductingphotocatalytic materials under indoor lightingenvironment — Part 4: Removal offormaldehyde
ISO/DIS 17168-5
Fine ceramics (advanced ceramics, advancedtechnical ceramics) — Test method for air-purification performance of semiconductingphotocatalytic materials under indoor lightingenvironment — Part 5: Removal of methylmercaptan
ISO/DIS 19618 Fine ceramics (advanced ceramics, advancedtechnical ceramics) — Measurement methodfor normal spectral emissivity using blackbodyreference with an FTIR spectrometer
TC 207 Environmental managementISO/DIS 14052 Environmental management — Material flow
cost accounting — Guidance for practicalimplementation in a supply chain
TC 209 Cleanrooms and associated controlledenvironments
ISO/DIS 14644-15
Cleanrooms and associated controlledenvironments — Part 15: Assessment ofsuitability for use of equipment and materialsby airborne chemical concentration
TC 211 Geographic information/GeomaticsISO/DIS 19160-
4Addressing — Part 4: International postaladdress components and template languages
TC 218 TimberISO/DIS 13061-
15Physical and mechanical properties of wood —Test methods for small clear wood specimens— Part 15: Determination of radial andtangential swelling(Revision of ISO 4859:1982)
ISO/DIS 13061-16
Physical and mechanical properties of wood —Test methods for small clear wood specimens— Part 16: Determination of volumetricswelling(Revision of ISO 4860:1982)
TC 225 Market, opinion and social researchISO/DIS 19731 Digital analytics and web analyses in market,
opinion and social research — Vocabulary andservice requirements
TC 249 Traditional chinese medicineISO/DIS 19610 Traditional Chinese medicine — General
requirements for industrial manufacturingprocess of red ginseng (Panax ginseng C.A.Meyer)
ISO NORMEN / NORMES ISO50
TC 268 Sustainable development incommunities
ISO/DIS 37102 Sustainable development and resilience ofcommunities — Vocabulary
TC 292 Security and resilienceISO/DIS 22316 Security and resilience — Guidelines for
organizational resilienceISO/DIS 22319 Security and resilience — Guidelines for
planning the involvement of spontaneousvolunteers
JTC 1 Information technologyISO/IEC DIS
30182Smart city concept model — Guidance forestablishing a model for data interoperability
ISO/IEC DIS30754
Information technology — Softwaretrustworthiness — Governance andmanagement — Specification
ISO/IEC 14443-2/DAmd 1
Identification cards — Contactless integratedcircuit cards — Proximity cards — Part 2:Radio frequency power and signal interface —Amendment 1: Parameters supporting activeand passive PICC transmissions
ISO/IEC 14443-2/DAmd 2
Identification cards — Contactless integratedcircuit cards — Proximity cards — Part 2:Radio frequency power and signal interface —Amendment 2: Limits of electromagneticdisturbance levels for all PICC classes
ISO/IEC DIS23009-2
Information technology — Dynamic adaptivestreaming over HTTP (DASH) — Part 2:Conformance and reference software(Revision of ISO/IEC 23009-2:2014)
ISO/IEC DIS30113-11
Information technology — Gesture-basedinterfaces across devices and methods — Part11: Single-point gestures for common systemactions
ISO/IEC DIS30122-2
Information technology — User interfaces —Voice commands — Part 2: Constructing andtesting
ISO/IEC DIS30122-3
Information technology — User interfaces —Voice commands — Part 3: Translation andlocalization
ISO/IEC DIS24709-1
Information technology — Conformancetesting for BioAPI — Part 1: Methods andprocedures(Revision of ISO/IEC 24709-1:2007)
PROJETS FINALSPériode du 1er avril 2016 au 30 avril 2016.*Actuellement disponible en anglais seulement.
TC 6 Paper, board and pulps
ISO/FDIS 11475 Paper and board — Determination of CIEwhiteness, D65/10 degrees (outdoor daylight)(Revision of ISO 11475:2004)
TC 20 Aircraft and space vehiclesISO/FDIS 27852 Space systems — Estimation of orbit lifetime
(Revision of ISO 27852:2011)
TC 24 Particle characterization includingsieving
ISO/FDIS 3310-1 Test sieves — Technical requirements andtesting — Part 1: Test sieves of metal wire cloth(Revision of ISO 3310-1:2000, ISO 3310-1:2000/Cor 1:2004)
TC 28 Petroleum products and related productsof synthetic or biological origin
ISO/FDIS 3924 Petroleum products — Determination of boilingrange distribution — Gas chromatographymethod(Revision of ISO 3924:2010)
TC 29 Small toolsISO/FDIS 240 Milling cutters — Interchangeability dimensions
for cutter arbors or cutter mandrels(Revision of ISO 240:1994)
ISO/FDIS 866 Centre drills for centre holes without protectingchamfers — Type A(Revision of ISO 866:1975)
ISO/FDIS 10897 Collets for tool holders with taper ratio 1:10 —Collets, holders, nuts(Revision of ISO 10897:1996)
TC 34 Food productsISO/FDIS 12824 Royal jelly — SpecificationsISO/FDIS 11816-2 Milk and milk products — Determination of
alkaline phosphatase activity — Part 2:Fluorometric method for cheese(Revision of ISO 11816-2:2003)
TC 35 Paints and varnishesISO/FDIS 1514 Paints and varnishes — Standard panels for
testing(Revision of ISO 1514:2004)
ISO/FDIS 3248 Paints and varnishes — Determination of theeffect of heat(Revision of ISO 3248:1998)
ISO/FDIS 4623-2 Paints and varnishes — Determination ofresistance to filiform corrosion — Part 2:Aluminium substrates(Revision of ISO 4623-2:2003, ISO 4623-2:2003/Cor 1:2005)
TC 43 AcousticsISO 389-7:2005/FDAmd 1
Acoustics — Reference zero for the calibration ofaudiometric equipment — Part 7: Referencethreshold of hearing under free-field and diffuse-field listening conditions — Amendment 1:Reference threshold of hearing at 20 Hz and 18
ISO NORMEN / NORMES ISO51
000 Hz under free-field listening conditions and at20 Hz under diffuse-field listening conditions
ISO/FDIS 5361 Anaesthetic and respiratory equipment —Tracheal tubes and connectors(Revision of ISO 5361:2012)
ISO/FDIS 5364 Anaesthetic and respiratory equipment —Oropharyngeal airways(Revision of ISO 5364:2008)
TC 131 Fluid power systemsISO/FDIS 16656 Hydraulic fluid power — Single rod, short-stroke
cylinders with bores from 32 mm to 100 mm foruse at 10 MPa (100 bar) — Mountingdimensions(Revision of ISO 16656:2004)
ISO/FDIS 12829 Hydraulic spin-on filters with finite lives —Method for verifying the rated fatigue life andthe rated static burst pressure of the pressure-containing envelope
TC 145 Graphical symbolsISO/FDIS 28564-2 Public information guidance systems — Part 2:
Design principles and requirements for locationsigns and direction signs
TC 146 Air qualityISO/FDIS 22262-3 Air quality — Bulk materials — Part 3:
Quantitative determination of asbestos by X-raydiffraction method
TC 150 Implants for surgeryISO/FDIS 7198 Cardiovascular implants and extracorporeal
systems — Vascular prostheses — Tubularvascular grafts and vascular patches(Revision of ISO 7198:1998)
ISO/FDIS 14242-2 Implants for surgery — Wear of total hip-jointprostheses — Part 2: Methods of measurement(Revision of ISO 14242-2:2000)
ISO/FDIS 14243-2 Implants for surgery — Wear of total knee-jointprostheses — Part 2: Methods of measurement(Revision of ISO 14243-2:2009)
TC 159 ErgonomicsISO/FDIS 6385 Ergonomics principles in the design of work
systems(Revision of ISO 6385:2004)
TC 163 Thermal performance and energy usein the built environment
ISO/FDIS 12572 Hygrothermal performance of building materialsand products — Determination of water vapourtransmission properties — Cup method(Revision of ISO 12572:2001)
TC 164 Mechanical testing of metalsISO/FDIS 6508-1 Metallic materials — Rockwell hardness test —
Part 1: Test method(Revision of ISO 6508-1:2015)
TC 172 Optics and photonics
ISO/FDIS 9022-1 Optics and photonics — Environmental testmethods — Part 1: Definitions, extent of testing(Revision of ISO 9022-1:2012)
ISO/FDIS 9022-23 Optics and photonics — Environmental testmethods — Part 23: Low pressure combinedwith cold, ambient temperature and dry anddamp heat(Revision of ISO 9022-23:2013)
TC 215 Health informaticsISO/IEEE FDIS11073-10417
Health informatics — Personal health devicecommunication — Part 10417: Devicespecialization — Glucose meter(Revision of ISO/IEEE 11073-10417:2014)
TC 221 GeosyntheticsISO/FDIS 9863-1 Geosynthetics — Determination of thickness at
specified pressures — Part 1: Single layers(Revision of ISO 9863-1:2005)
IULTCS International Union of LeatherTechnologists and Chemists Societies
ISO/FDIS 19076 Leather — Measurement of leather surface —Using electronic techniques
JTC 1 Information technologyISO/IEC/IEEE FDIS29119-5
Software and systems engineering — Softwaretesting — Part 5: Keyword-driven testing
ISO/IEC FDIS18745-2
Test methods for machine readable traveldocuments (MRTD) and associated readers —Part 2: Test methods for the contactlessinterface
ISO/IEC 13818-1:2015/FDAmd 5
Information technology — Generic coding ofmoving pictures and associated audioinformation — Part 1: Systems — Amendment5: Carriage of MPEGH 3D audio over MPEG2systems
ISO/IEC 23001-11:2015/FDAmd 1
Information technology — MPEG systemstechnologies — Part 11: Energy-efficient mediaconsumption (green metadata) — Amendment1: Carriage of Green Metadata in an HEVC SEIMessage
ISO/IEC 23003-3:2012/FDAmd 3
Information technology — MPEG audiotechnologies — Part 3: Unified speech andaudio coding — Amendment 3: Support ofMPEG-D DRC, Audio Pre-Roll and ImmediatePlay-Out Frame
ISO/IEC FDIS23005-1
Information technology — Media context andcontrol — Part 1: Architecture(Revision of ISO/IEC 23005-1:2014)
ISO/IEC FDIS29187-1
Information technology — Identification ofprivacy protection requirements pertaining tolearning, education and training (LET) — Part 1:Framework and reference model(Revision of ISO/IEC 29187-1:2013)
ISO NORMEN / NORMES ISO52
NORMES PUBLIEESNouvelles Normes internationales publiées entre le 1er avril2016 et le 30 avril 2016.*Actuellement disponible en anglais seulement.** Version française de la norme publiée précédemment enanglais seulement
TC 5 Ferrous metal pipes and metallicfittings
ISO 16132:2016 Ductile iron pipes and fittings — Seal coatsfor cement mortar linings
TC 6 Paper, board and pulpsISO 8254-3:2016 Paper and board — Measurement of specular
gloss — Part 3: 20 degree gloss with aconverging beam, TAPPI method
TC 8 Ships and marine technologyISO 15364:2016 Ships and marine technology —
Pressure/vacuum valves for cargo tanksISO 7236:2014 Ships and marine technology — Inland
navigation vessels — Mounting attachmentsfor demountable signal masts for push-tows
TC 17 SteelISO 4955:2016 Heat-resistant steelsISO 17745:2016 Steel wire ring net panels — Definitions and
specificationsISO 17746:2016 Steel wire rope net panels and rolls —
Definitions and specificationsISO 22034-2:2016 Steel wire and wire products — Part 2:
Tolerances on wire dimensionsTC 20 Aircraft and space vehiclesISO 17520:2016 Space environment (natural and artificial) —
Cosmic ray and solar energetic particlepenetration inward the magnetosphere —Method of determination of the effectivevertical cut-off rigidity
TC 21 Equipment for fire protection and firefighting
ISO 7240-24:2016 Fire detection and fire alarm systems — Part24: Fire alarm loudspeakers
TC 22 Road vehiclesISO 15031-3:2016 Road vehicles — Communication between
vehicle and external equipment for emissions-related diagnostics — Part 3: Diagnosticconnector and related electrical circuits:Specification and use
ISO 15765-2:2016 Road vehicles — Diagnostic communicationover Controller Area Network (DoCAN) —Part 2: Transport protocol and network layerservices
ISO 15765-4:2016 Road vehicles — Diagnostic communicationover Controller Area Network (DoCAN) —Part 4: Requirements for emissions-relatedsystems
ISO 10924-1:2016 Road vehicles — Circuit breakers — Part 1:Definitions and general test requirements
ISO 10924-5:2016 Road vehicles — Circuit breakers — Part 5:Circuit breakers with bolt with rated voltage of450 V
ISO 13674-2:2016 Road vehicles — Test method for thequantification of on-centre handling — Part 2:Transition test
ISO 14513:2016 Road vehicles — Pedestrian protection —Head impact test method
ISO/PAS19295:2016
Electrically propelled road vehicles —Specification of voltage sub-classes forvoltage class B
ISO 12619-3:2014/Amd 1:2016
Road vehicles — Compressed gaseoushydrogen (CGH2) and hydrogen/natural gasblend fuel system components — Part 3:Pressure regulator — Amendment 1: .
ISO 15500-2:2016 Road vehicles — Compressed natural gas(CNG) fuel system components — Part 2:Performance and general test methods
TC 24 Particle characterization includingsieving
ISO 15901-1:2016 Evaluation of pore size distribution andporosity of solid materials by mercuryporosimetry and gas adsorption — Part 1:Mercury porosimetry
TC 25 Cast irons and pig ironsISO/TR 945-3:2016Microstructure of cast irons — Part 3: Matrix
structuresTC 31 Tyres, rims and valvesISO 10571:2016 Tyres for mobile cranes and similar
specialized machinesTC 33 RefractoriesISO 18886:2016 Refractory test-piece preparation — Gunning
refractory panels by wet gunning techniquesTC 34 Food productsISO 8968-4:2016 Milk and milk products — Determination of
nitrogen content — Part 4: Determination ofprotein and non-protein nitrogen content andtrue protein content calculation (Referencemethod)
ISO 662:2016 Animal and vegetable fats and oils —Determination of moisture and volatile mattercontent
ISO 6886:2016 Animal and vegetable fats and oils —Determination of oxidative stability(accelerated oxidation test)
ISO/TS 22002-6:2016
Prerequisite programmes on food safety —Part 6: Feed and animal food production
TC 35 Paints and varnishesISO 19399:2016 Paints and varnishes — Wedge-cut method
for determination of film thickness (scribe anddrill method)
TC 36 Cinematography
ISO NORMEN / NORMES ISO53
ISO 21727:2016 Cinematography — Method of measurementof perceived loudness of short durationmotion-picture audio material
TC 38 TextilesISO 18254-1:2016 Textiles — Method for the detection and
determination of alkylphenol ethoxylates(APEO) — Part 1: Method using HPLC-MS
TC 45 Rubber and rubber productsISO 2782-1:2016 Rubber, vulcanized or thermoplastic —
Determination of permeability to gases —Part 1: Differential-pressure methods
TC 46 Information and documentationISO 15489-1:2016 Information and documentation — Records
management — Part 1: Concepts andprinciples
TC 58 Gas cylindersISO 14456:2015 Gas cylinders — Gas properties and
associated classification (FTSC) codesISO 16148:2016 Gas cylinders — Refillable seamless steel
gas cylinders and tubes — Acoustic emissionexamination (AT) and follow-up ultrasonicexamination (UT) for periodic inspection andtesting
TC 59 Buildings and civil engineering worksISO 29481-1:2016 Building information models — Information
delivery manual — Part 1: Methodology andformat
TC 61 PlasticsISO 1043-1:2011/Amd 1:2016
Plastics — Symbols and abbreviated terms —Part 1: Basic polymers and their specialcharacteristics — Amendment 1: New symbolST for syndiotactic
ISO 1043-4:1998/Amd 1:2016
Plastics — Symbols and abbreviated terms —Part 4: Flame retardants — Amendment 1:Code numbers
ISO 4892-1:2016 Plastics — Methods of exposure to laboratorylight sources — Part 1: General guidance
TC 85 Nuclear energy, nuclear technologies,and radiological protection
ISO 11665-11:2016Measurement of radioactivity in theenvironment — Air: radon-222 — Part 11:Test method for soil gas with sampling atdepth
TC 94 Personal safety -- Protective clothingand equipment
ISO 16900-7:2015 Respiratory protective devices — Methods oftest and test equipment — Part 7: Practicalperformance test methods
ISO 16900-14:2015Respiratory protective devices — Methods oftest and test equipment — Part 14:Measurement of sound level
ISO/TS16973:2016
Respiratory protective devices —Classification for respiratory protective device
(RPD), excluding RPD for underwaterapplication
TC 96 CranesISO4305:2014/Amd1:2016
Mobile cranes — Determination of stability —Amendment 1
TC 102 Iron ore and direct reduced ironISO/TR18231:2016
Iron ores — Wavelength dispersive X-rayfluorescence spectrometers — Determinationof precision
TC 106 DentistryISO 2157:2016 Dentistry — Nominal diameters and
designation code numbers for rotaryinstruments
ISO 7787-1:2016 Dentistry — Laboratory cutters — Part 1:Steel laboratory cutters
ISO 18556:2016 Dentistry — Intraoral spatulasTC 108 Mechanical vibration, shock and
condition monitoringISO 29821-2:2016 Condition monitoring and diagnostics of
machines — Ultrasound — Part 2:Procedures and validation
TC 110 Industrial trucksISO 11525-4:2016 Rough-terrain trucks — User requirements —
Part 4: Additional requirements for variable-reach trucks handling freely suspended loads
TC 114 HorologyISO 1413:2016 Horology — Shock-resistant wrist watchesTC 118 Compressors and pneumatic tools,
machines and equipmentISO1217:2009/Amd1:2016
Displacement compressors — Acceptancetests — Amendment 1: Calculation ofisentropic efficiency and relationship withspecific energy
TC 127 Earth-moving machineryISO 12117-2:2008/Amd 1:2016
Earth-moving machinery — Laboratory testsand performance requirements for protectivestructures of excavators — Part 2: Roll-overprotective structures (ROPS) for excavatorsof over 6 t — Amendment 1
ISO 8812:2016 Earth-moving machinery — Backhoe loaders— Terminology and commercialspecifications
TC 130 Graphic technologyISO 5776:2016 Graphic technology — Symbols for text proof
correctionISO 18620:2016 Graphic technology — Prepress data
exchange — Tone adjustment curvesexchange
TC 131 Fluid power systemsISO 1219-1:2012/Amd 1:2016
Fluid power systems and components —Graphical symbols and circuit diagrams —Part 1: Graphical symbols for conventional
ISO NORMEN / NORMES ISO54
use and data-processing applications —Amendment 1
TC 133 Clothing sizing systems - sizedesignation, size measurementmethods and digital fittings
ISO 18163:2016 Clothing — Digital fittings — Vocabulary andterminology used for the virtual garment
ISO 18831:2016 Clothing — Digital fittings — Attributes ofvirtual garments
TC 134 Fertilizers and soil conditionersISO 14820-1:2016 Fertilizers and liming materials — Sampling
and sample preparation — Part 1: SamplingISO 14820-2:2016 Fertilizers and liming materials — Sampling
and sample preparation — Part 2: Samplepreparation
ISO 15604:2016 Fertilizers — Determination of different formsof nitrogen in the same sample, containingnitrogen as nitric, ammoniacal, urea andcyanamide nitrogen
ISO 18644:2016 Fertilizers and soil conditioners — Controlled-release fertilizer — General requirements
ISO 25475:2016 Fertilizers — Determination of ammoniacalnitrogen
ISO 25705:2016 Fertilizers — Determination of ureacondensates using high-performance liquidchromatography (HPLC) —Isobutylidenediurea and crotonylidenediurea(method A) and methylen-urea oligomers(method B)
TC 147 Water qualityISO 17943:2016 Water quality — Determination of volatile
organic compounds in water — Method usingheadspace solid-phase micro-extraction (HS-SPME) followed by gas chromatography-mass spectrometry (GC-MS)
ISO 18635:2016 Water quality — Determination of short-chainpolychlorinated alkanes (SCCPs) in sediment,sewage sludge and suspended (particulate)matter — Method using gas chromatography-mass spectrometry (GC-MS) and electroncapture negative ionization (ECNI)
ISO 5667-6:2014 Water quality — Sampling — Part 6:Guidance on sampling of rivers and streams
ISO 5667-24:2016 Water quality — Sampling — Part 24:Guidance on the auditing of water qualitysampling
TC 153 ValvesISO 7121:2016 Steel ball valves for general-purpose
industrial applicationsTC 159 ErgonomicsISO 24505:2016 Ergonomics — Accessible design — Method
for creating colour combinations takingaccount of age-related changes in humancolour vision
TC 165 Timber structures
ISO 12578:2016 Timber structures — Glued laminated timber— Component performance requirements
ISO 18324:2016 Timber structures — Test methods — Floorvibration performance
ISO 19049:2016 Timber structures — Test method — Staticload tests for horizontal diaphragms includingfloors and roofs
TC 190 Soil qualityISO 17183:2016 Soil quality — Screening soils for
isopropanol-extractable organic compoundsby determining emulsification index by lightattenuation
ISO 18187:2016 Soil quality — Contact test for solid samplesusing the dehydrogenase activity ofArthrobacter globiformis
TC 204 Intelligent transport systemsISO 24534-3:2016 Intelligent transport systems — Automatic
vehicle and equipment identification —Electronic registration identification (ERI) forvehicles — Part 3: Vehicle data
TC 206 Fine ceramicsISO 14704:2016 Fine ceramics (advanced ceramics, advanced
technical ceramics) — Test method forflexural strength of monolithic ceramics atroom temperature
ISO 17562:2016 Fine ceramics (advanced ceramics, advancedtechnical ceramics) — Test method for linearthermal expansion of monolithic ceramics bypush-rod technique
ISO 19635:2016 Fine ceramics (advanced ceramics, advancedtechnical ceramics) — Test method forantialgal activity of semiconductingphotocatalytic materials
TC 210 Quality management andcorresponding general aspects formedical devices
IEC/TR 62366-2:2016
Medical devices — Part 2: Guidance on theapplication of usability engineering to medicaldevices
TC 211 Geographic information/GeomaticsISO 19119:2016 Geographic information — ServicesISO/TS 19159-2:2016
Geographic information — Calibration andvalidation of remote sensing imagery sensorsand data — Part 2: Lidar
TC 213 Dimensional and geometrical productspecifications and verification
ISO 3040:2016 Geometrical product specifications (GPS) —Dimensioning and tolerancing — Cones
ISO 10360-10:2016Geometrical product specifications (GPS) —Acceptance and reverification tests forcoordinate measuring systems (CMS) — Part10: Laser trackers for measuring point-to-point distances
ISO NORMEN / NORMES ISO55
ISO 25178-1:2016 Geometrical product specifications (GPS) —Surface texture: Areal — Part 1: Indication ofsurface texture
TC 216 FootwearISO 10734:2016 Footwear — Test method for slide fasteners
— Strength of slide fastener pullersISO 10751:2016 Footwear — Test methods for slide fasteners
— Resistance to repeated opening andclosing
ISO 10764:2016 Footwear — Test methods for slide fasteners— Lateral strength
ISO 17694:2016 Footwear — Test methods for uppers andlining — Flex resistance
ISO 17697:2016 Footwear — Test methods for uppers, liningand insocks — Seam strength
ISO 17698:2016 Footwear — Test methods for uppers —Delamination resistance
ISO 17701:2016 Footwear — Test methods for uppers, liningand insocks — Colour migration
ISO 18403:2016 Footwear — Test methods for slide fasteners— Resistance to damage during closureunder a lateral force
ISO 22649:2016 Footwear — Test methods for insoles andinsocks — Water absorption and desorption
TC 229 NanotechnologiesISO/TR19716:2016
Nanotechnologies — Characterization ofcellulose nanocrystals
TC 257 Evaluation of energy savingsISO 17741:2016 General technical rules for measurement,
calculation and verification of energy savingsof projects
TC 272 Forensic sciencesISO 18385:2016 Minimizing the risk of human DNA
contamination in products used to collect,store and analyze biological material forforensic purposes — Requirements
JTC 1 Information technologyISO/IEC10646:2014/Amd2:2016
Information technology — Universal CodedCharacter Set (UCS) — Amendment 2:Bhaiksuki, Marchen, Tangut and othercharacters
ISO/IEC/IEEE18881:2016
Information technology — Ubiquitous greencommunity control network — Control andmanagement
ISO/IEC/IEEE18883:2016
Information technology — Ubiquitous greencommunity control network — Security
ISO/IEC 19770-3:2016
Information technology — IT assetmanagement — Part 3: Entitlement schema
ISO/IEC TS 24748-1:2016
Systems and software engineering — Lifecycle management — Part 1: Guidelines forlife cycle management
ISO/IEC26551:2016
Software and systems engineering — Toolsand methods for product line requirementsengineering
ISO/IEC TR 29110-2-2:2016
Systems and software engineering —Lifecycle profiles for Very Small Entities(VSEs) — Part 2-2: Guide for thedevelopment of domain-specific profiles
ISO/IEC29169:2016
Information technology — Processassessment — Application of conformityassessment methodology to the assessmentto process quality characteristics andorganizational maturity
ISO/IEC 30100-1:2016
Information technology — Home networkresource management — Part 1:Requirements
ISO/IEC 30100-2:2016
Information technology — Home networkresource management — Part 2: Architecture
ISO/IEC 30100-3:2016
Information technology — Home networkresource management — Part 3:Management application
ISO/IEC27039:2015
Information technology — Securitytechniques — Selection, deployment andoperations of intrusion detection andprevention systems (IDPS)
ISO/IEC 23001-8:2016
Information technology — MPEG systemstechnologies — Part 8: Coding-independentcode points
ISO/IEC29177:2016
Information technology — Automaticidentification and data capture technique —Identifier resolution protocol for multimediainformation access triggered by tag-basedidentification
ISO/IEC TR15440:2016
Information technology — Future keyboardsand other input devices and entry methods
ISO/IEC 24779-1:2016
Information technology — Cross-jurisdictionaland societal aspects of implementation ofbiometric technologies — Pictograms, iconsand symbols for use with biometric systems— Part 1: General principles
ISO/IEC 30108-1:2015
Information technology — Biometric IdentityAssurance Services — Part 1: BIAS services
ISO/IEC TR30125:2016
Information technology — Biometrics usedwith mobile devices
ISO/IEC 30134-2:2016
Information technology — Data centres —Key performance indicators — Part 2: Powerusage effectiveness (PUE)
ISO/IEC 30134-3:2016
Information technology — Data centres —Key performance indicators — Part 3:Renewable energy factor (REF)
NORMES CONFIRMEESLes Normes internationales suivantes sont confirmées pour cinqans:
TC 22 Road vehiclesISO 27955:2010
ISO NORMEN / NORMES ISO56
ISO 29061-1:2010
TC 28 Petroleum products and relatedproducts of synthetic or biologicalorigin
ISO 1998-6:2000 (reconfirmed)ISO 1998-99:2000 (reconfirmed)ISO 4404-2:2010
ISO 20783-1:2011
ISO 20843:2011
TC 29 Small toolsISO 8486-2:2007 (reconfirmed)ISO 6753-2:1998 (reconfirmed)ISO 8017:2007 (reconfirmed)ISO 10071-2:2005 (reconfirmed)ISO 28238:2010
TC 34 Food productsISO 3976:2006 (reconfirmed)ISO 9874:2006 (reconfirmed)TC 35 Paints and varnishesISO/TR15235:2001ISO 16276-1:2007 (reconfirmed)ISO 16276-2:2007 (reconfirmed)ISO 29601:2011
TC 39 Machine toolsISO 8956:1986 (reconfirmed)TC 44 Welding and allied processesISO 2401:1972 (reconfirmed)ISO/TR 17671-1:2002TC 46 Information and documentationISO/TR 15489-2:2001TC 54 Essential oilsISO 3217:1974 (reconfirmed)TC 61 PlasticsISO 171:1980 (reconfirmed)ISO 1183-3:1999 (reconfirmed)ISO 1675:1985 (reconfirmed)ISO 4581:1994 (reconfirmed)ISO 7059:1982 (reconfirmed)ISO 8112:1984 (reconfirmed)ISO 8661:1988 (reconfirmed)ISO 11337:2010
ISO 175:2010
ISO 4611:2010
ISO 29664:2010
TC 67 Materials, equipment and offshorestructures for petroleum,petrochemical and natural gasindustries
ISO 21809-4:2009
TC 69 Applications of statistical methodsISO 10725:2000 (reconfirmed)ISO 11843-2:2000 (reconfirmed)ISO 21748:2010
TC 79 Light metals and their alloysISO 2107:2007 (reconfirmed)TC 92 Fire safetyISO/TS 5660-3:2012ISO 29473:2010
ISO 10295-1:2007 (reconfirmed)TC 96 CranesISO 7296-3:2006 (reconfirmed)ISO 9942-3:1999 (reconfirmed)TC 109 Oil and gas burnersISO 22967:2010
ISO 22968:2010
TC 131 Fluid power systemsISO 12151-6:2009
ISO 4413:2010
ISO 4414:2010
TC 135 Non-destructive testingISO/TR25107:2006ISO/TR25108:2006TC 136 FurnitureISO 21015:2007 (reconfirmed)TC 138 Plastics pipes, fittings and valves for
the transport of fluidsISO 13950:2007 (reconfirmed)ISO 14531-3:2010
TC 146 Air qualityISO 16000-8:2007 (reconfirmed)TC 150 Implants for surgeryISO 21535:2007 (reconfirmed)ISO 5836:1988 (reconfirmed)ISO 5837-1:1985 (reconfirmed)ISO 8615:1991 (reconfirmed)TC 159 ErgonomicsISO 9241-1:1997 (reconfirmed)TC 163 Thermal performance and energy use
in the built environmentISO 15099:2003 (reconfirmed)TC 164 Mechanical testing of metalsISO 1143:2010
TC 170 Surgical instrumentsISO 7740:1985 (reconfirmed)TC 173 Assistive products for persons with
disability
ISO NORMEN / NORMES ISO57
ISO 11334-4:1999 (reconfirmed)ISO 16021:2000 (reconfirmed)TC 181 Safety of toysISO 8124-3:2010
TC 182 GeotechnicsISO/TS 17892-10:2004
(reconfirmed)
ISO/TS 17892-11:2004
(reconfirmed)
ISO/TS 17892-12:2004
(reconfirmed)
TC 184 Automation systems and integrationISO/TS 10303-1071:2005
(reconfirmed)
ISO/TS 10303-1074:2005
(reconfirmed)
ISO/TS 10303-1077:2005
(reconfirmed)
ISO/TS 10303-1080:2005
(reconfirmed)
ISO/TS 10303-1085:2005
(reconfirmed)
ISO/TS 10303-1091:2005
(reconfirmed)
ISO/TS 10303-1092:2005
(reconfirmed)
ISO/TS 10303-1099:2005
(reconfirmed)
ISO/TS 10303-1101:2005
(reconfirmed)
ISO/TS 10303-1102:2005
(reconfirmed)
ISO/TS 10303-1113:2006
(reconfirmed)
ISO/TS 10303-1143:2005
(reconfirmed)
ISO/TS 10303-1144:2005
(reconfirmed)
ISO/TS 10303-1145:2005
(reconfirmed)
ISO/TS 10303-1146:2005
(reconfirmed)
ISO/TS 10303-1151:2005
(reconfirmed)
ISO/TS 10303-1156:2005
(reconfirmed)
ISO/TS 10303-1157:2005
(reconfirmed)
ISO/TS 10303-1158:2005
(reconfirmed)
ISO/TS 10303-1159:2005
(reconfirmed)
ISO/TS 10303-1160:2005
(reconfirmed)
ISO/TS 10303-1161:2005
(reconfirmed)
ISO/TS 10303-1162:2005
(reconfirmed)
ISO/TS 10303-1163:2005
(reconfirmed)
ISO/TS 10303-1165:2005
(reconfirmed)
ISO/TS 10303-1166:2005
(reconfirmed)
ISO/TS 10303-1167:2005
(reconfirmed)
ISO/TS 10303-1168:2005
(reconfirmed)
ISO/TS 10303-1169:2005
(reconfirmed)
ISO/TS 10303-1170:2005
(reconfirmed)
ISO/TS 10303-1171:2005
(reconfirmed)
ISO/TS 10303-1172:2005
(reconfirmed)
ISO/TS 10303-1173:2005
(reconfirmed)
ISO/TS 10303-1174:2005
(reconfirmed)
ISO/TS 10303-1175:2005
(reconfirmed)
ISO/TS 10303-1176:2005
(reconfirmed)
ISO/TS 10303-1177:2005
(reconfirmed)
ISO/TS 10303-1178:2005
(reconfirmed)
ISO/TS 10303-1179:2005
(reconfirmed)
ISO/TS 10303-1188:2005
(reconfirmed)
ISO/TS 10303-1198:2005
(reconfirmed)
ISO/TS 10303-1199:2005
(reconfirmed)
ISO/TS 10303-1203:2005
(reconfirmed)
ISO/TS 10303-1204:2005
(reconfirmed)
ISO/TS 10303-1205:2005
(reconfirmed)
ISO/TS 10303-1207:2005
(reconfirmed)
ISO/TS 10303-1208:2005
(reconfirmed)
ISO/TS 10303-1209:2005
(reconfirmed)
ISO/TS 10303-1211:2005
(reconfirmed)
ISO NORMEN / NORMES ISO58
ISO/TS 10303-1212:2005
(reconfirmed)
ISO/TS 10303-1213:2005
(reconfirmed)
ISO/TS 10303-1215:2008
(reconfirmed)
ISO/TS 10303-1216:2008
(reconfirmed)
ISO/TS 10303-1230:2005
(reconfirmed)
ISO/TS 10303-1242:2004
(reconfirmed)
ISO/TS 10303-1291:2008
(reconfirmed)
ISO/TS 10303-1313:2008
(reconfirmed)
ISO/TS 10303-1314:2008
(reconfirmed)
ISO/TS 10303-1318:2008
(reconfirmed)
ISO/TS 10303-1321:2008
(reconfirmed)
ISO/TS 10303-1322:2008
(reconfirmed)
ISO/TS 10303-1324:2008
(reconfirmed)
ISO/TS 10303-1329:2008
(reconfirmed)
ISO/TS 10303-1330:2008
(reconfirmed)
ISO/TS 10303-1331:2008
(reconfirmed)
ISO/TS 10303-1347:2005
(reconfirmed)
ISO/TS 10303-1352:2006
(reconfirmed)
ISO/TS 10303-1353:2006
(reconfirmed)
ISO/TS 10303-1354:2006
(reconfirmed)
ISO/TS 10303-1355:2006
(reconfirmed)
ISO/TS 10303-1366:2008
(reconfirmed)
ISO/TS 10303-1369:2008
(reconfirmed)
ISO/TS 10303-1602:2006
(reconfirmed)
ISO/TS 10303-1604:2006
(reconfirmed)
ISO/TS 10303-1605:2006
(reconfirmed)
ISO/TS 10303-1606:2006
(reconfirmed)
ISO/TS 10303-1607:2006
(reconfirmed)
ISO/TS 10303-1608:2006
(reconfirmed)
ISO/TS 10303-1609:2006
(reconfirmed)
ISO/TS 10303-1610:2006
(reconfirmed)
ISO/TS 10303-1611:2006
(reconfirmed)
ISO/TS 10303-1612:2006
(reconfirmed)
ISO/TS 10303-1614:2006
(reconfirmed)
ISO/TS 10303-1615:2006
(reconfirmed)
ISO/TS 10303-1616:2006
(reconfirmed)
ISO/TS 10303-1617:2006
(reconfirmed)
ISO/TS 10303-1618:2006
(reconfirmed)
ISO/TS 10303-1619:2006
(reconfirmed)
ISO/TS 10303-1620:2006
(reconfirmed)
ISO/TS 10303-1621:2006
(reconfirmed)
ISO/TS 10303-1622:2006
(reconfirmed)
ISO/TS 10303-1623:2006
(reconfirmed)
ISO/TS 10303-1624:2006
(reconfirmed)
ISO/TS 10303-1625:2006
(reconfirmed)
ISO/TS 10303-1626:2006
(reconfirmed)
ISO/TS 10303-1627:2006
(reconfirmed)
ISO/TS 10303-1630:2006
(reconfirmed)
ISO/TS 10303-1658:2006
(reconfirmed)
ISO/TS 10303-1659:2006
(reconfirmed)
ISO/TS 10303-1661:2006
(reconfirmed)
ISO/TS 10303-1665:2006
(reconfirmed)
ISO/TS 10303-1673:2006
(reconfirmed)
ISO/TS 10303-1675:2006
(reconfirmed)
ISO/TS 10303-1677:2006
(reconfirmed)
ISO/TS 10303-1678:2006
(reconfirmed)
ISO NORMEN / NORMES ISO59
ISO/TS 10303-1680:2006
(reconfirmed)
ISO/TS 10303-1715:2008
(reconfirmed)
ISO/TS 10303-1738:2006
(reconfirmed)
ISO/TS 10303-1745:2006
(reconfirmed)
ISO/TS 10303-1757:2006
(reconfirmed)
ISO/TS 10303-1759:2006
(reconfirmed)
ISO/TS 10303-1762:2008
(reconfirmed)
ISO/TS 10303-1775:2008
(reconfirmed)
ISO/TS 10303-1777:2008
(reconfirmed)
ISO/TS 10303-1780:2008
(reconfirmed)
ISO 13584-32:2010
ISO 13584-42:2010
ISO 15531-44:2010
ISO/TS 15926-4:2007
(reconfirmed)
ISO 22745-13:2010
TC 194 Biological and clinical evaluation ofmedical devices
ISO 10993-10:2010
ISO/TR 22442-4:2010TC 207 Environmental managementISO 14020:2000 (reconfirmed)TC 212 Clinical laboratory testing and in vitro
diagnostic test systemsISO/TS 22367:2008(reconfirmed)TC 215 Health informaticsISO/IEEE 11073-10407:2010TC 219 Floor coveringsISO 1957:2000 (reconfirmed)ISO 10595:2010
ISO 11378-1:2000 (reconfirmed)ISO 13750:2000 (reconfirmed)TC 229 NanotechnologiesISO 10801:2010
ISO 10808:2010
ISO/TS 11931:2012
ISO/TS 11937:2012
ISO/TS 12025:2012
ISO/TS 12901-1:2012
ISO/TS 14101:2012
ISO 29701:2010
JTC 1 Information technologyISO/IEC 1539-1:2010
NORMES ANNULEESPériode du 1er avril 2016 au 30 avril 2016.
TC 34 Food productsISO 8968-5:2001 (replaced by ISO 8968-4:2016)TC 138 Plastics pipes, fittings and valves for
the transport of fluidsISO14828:2003/Amd1:2010
(replaced by )
JTC 1 Information technologyISO/IEC TR24748-1:2010
(replaced by ISO/IEC TS 24748-1:2016)
ISO/IEC 15459-8:2009
(replaced by )