instal BitDeffender
-
Upload
fiqih-ibrahim -
Category
Documents
-
view
217 -
download
0
Transcript of instal BitDeffender
-
7/27/2019 instal BitDeffender
1/3
1) Download the chosen BitDefender 2012 product (Antivirus Plus, Internet Security or
Total Security) which is suitable for your OS (32 or 64bit) from the appropriate direct
links shown above.
2) Download in the desktop the Activator by Liqensoft 1.5.5
(liQeNSoft_Bitdefender_activator.exe) from any of the links shown above.
3) If you had BitDefender 2012 or any other version of BitDefender previously patched
or run the activator, don't forget to uninstall the patch or to disable the activator the
before installing BitDefender 2012.
4) Install BitDefender 2012 in trial (evaluation) mode. Do not update BitDefender 2012
during installation to expedite the process. Don't forget to use a real email during
installation because you will make use of it during the activation procedure.
Furthermore and depending on certain circumstances, you may receive a link in said
email account from BitDefender which you have to open to create an account with
BitDefender.
5) Once BitDefender installation is finished, restart the PC in Windows Safe Mode with
Networking because the Activator by Liqensoft 1.5.5 shall need to gain access to the
Internet.
6) Once in Windows Safe Mode with Networking, double click the downloaded activator
("liQeNSoft_Bitdefender_activator.exe") which is located in the desktop and follow the
on-screen instructions:
Quote:
a) A tiny green window pops up where you shoud choose "English" => OK.
b) In the Liqensoft Activator GUI which appears and shows on its bottom left
corner the current validity period of your BitDefender 2012, click the "Activate!"
button.
c) In the following window, you have to sign in your BitDefender account if you
already have one or if you do not, then you will have to create it and save it. Use the
same email account that you have typed in during BitDefender installation as per 4)
above.
d) Once you are logged in your BitDefender account press "Continue ..."
e) A tiny green window appears where you have to set the date until when you wish
to have your BitDefender activated and then click the "Activate" button.
f) The Liqensoft Activator GUI appears again showing now on its bottom left corner
the validity period of your BitDefender 2012 that you have set as per e) above.
g) Close Liqensoft Activator by clicking the "X".
-
7/27/2019 instal BitDeffender
2/3
7) Restart the PC in Windows Normal Mode and update your BitDefender 2012
normally.
NOTE 1: If any of the different windows which will appear while running the Activator
by Liqensoft 1.5.5. are not well shown in your monitor, it is recommended to adjust thescreen resolution to 1024 x 768 (Right click on an empty space in your desktop =>
Screen Resolution => Set it to 1024 x 768 => OK)
NOTE 2: If for any reason whatsoever, you want or need to revert your BitDefender
2012 to trial mode, then follow Steps 5 through 6b) above but in this case click the
"Disable" button in the Liqensoft Activator GUI and then restart the PC in Windows
Normal Mode.
1) Download BitDefender 2012 dipilih produk (Antivirus Plus, Internet Security atau Total
Security) yang cocok untuk OS anda (32 atau 64bit) dari link langsung yang sesuai di atas.
2) Download di desktop Penggerak oleh Liqensoft 1.5.5
(liQeNSoft_Bitdefender_activator.exe) dari salah satu link di atas.
3) Jika Anda memiliki BitDefender 2012 atau versi lain dari BitDefender sebelumnya
ditambal atau menjalankan aktivator, jangan lupa untuk uninstall patch atau menonaktifkan
aktivator sebelum menginstal BitDefender 2012.
4) Instal BitDefender 2012 di percobaan (evaluasi) mode. Mohon jangan di update
BitDefender 2012 selama instalasi untuk memperlancar proses. Jangan lupa untuk
menggunakan email yang sebenarnya pada saat instalasi karena Anda akan memanfaatkannya
selama prosedur aktivasi. Lebih lanjut dan tergantung pada keadaan tertentu, Anda akan
menerima link dalam kata akun email dari BitDefender yang Anda harus terbuka untuk
membuat account dengan BitDefender.
5) Setelah BitDefender instalasi selesai, restart PC pada Windows Safe Mode dengan
Jaringan karena Activator oleh Liqensoft 1.5.5 akan perlu mendapatkan akses ke Internet.
6) Setelah di Windows Safe Mode with Networking, klik dua kali aktivator download
("liQeNSoft_Bitdefender_activator.exe") yang terletak di desktop dan ikuti petunjuk pada
layar:
Quote:
-
7/27/2019 instal BitDeffender
3/3
a) Sebuah jendela hijau kecil muncul di mana Anda shoud memilih "Bahasa Inggris" => OK.
b) Dalam Liqensoft Penggerak GUI yang muncul dan menunjukkan pada pojok kiri bawah
yang masa berlaku saat Anda BitDefender 2012, klik "Aktifkan!" tombol.
c) Dalam jendela berikut, Anda harus sign in akun BitDefender Anda jika Anda sudah
memiliki satu atau jika Anda tidak, maka Anda akan harus membuat dan menyimpannya.
Gunakan account email yang sama yang telah Anda ketik di saat instalasi BitDefender sesuai
4) di atas.
d) Setelah Anda login di tekan account Anda BitDefender "Lanjutkan ..."
e) Sebuah jendela hijau kecil muncul di mana Anda harus mengatur tanggal sampai kapan
Anda ingin memiliki BitDefender Anda diaktifkan dan kemudian klik "Aktifkan" tombol.
f) Liqensoft Penggerak GUI muncul lagi sekarang menampilkan sudut kiri bawah yang masa
berlakunya Anda BitDefender 2012 yang diatur sesuai e) diatas.
g) Tutup Liqensoft Activator dengan mengklik "X".
7) Restart PC dalam Mode di Windows Normal dan memperbarui BitDefender 2012 normal.
CATATAN 1: Jika salah satu jendela yang berbeda yang akan muncul saat menjalankan
Penggerak oleh Liqensoft 1.5.5. tidak baik ditunjukkan pada monitor anda, dianjurkan untuk
mengatur resolusi layar ke 1024 x 768 (klik kanan pada ruang kosong di desktop Anda =>
Resolusi Layar => Set ke 1024 x 768 => OK)
CATATAN 2: Jika untuk alasan apapun, Anda ingin atau perlu untuk kembali Anda
BitDefender 2012 untuk mode percobaan, kemudian ikuti Langkah 5 sampai 6b) di atas tetapi
dalam hal ini klik "Disable" tombol di Liqensoft Penggerak GUI dan kemudian restart PCdalam Mode di Windows Normal