Implantate für die Fußchirurgiebordo.com.ar.elserver.com/cirugia/normed-inf05.pdf · Pinza plana,...
Transcript of Implantate für die Fußchirurgiebordo.com.ar.elserver.com/cirugia/normed-inf05.pdf · Pinza plana,...
Das System, The System, El Sistema
Das Material, The Material, El Material
Die Schrauben, The Screws, Los Tornillos
• Selbstschneidend• Standard- und winkelstabile Ausführung• TX-Lock für optimales Drehmoment,
Kraftübertragung und Haltestabilität• Bündiges Abschließen mit der Platte• End-Lock: Schraube blockiert
- dreht nicht durch die Platte• Fixateur- intern Effekt• Einfache Schraubenaufnahme
- verbesserter Selbsthaltemechanismus
• Self-tapping• Standard and locking screws available• TX-Lock for optimal torque,
power trans mission and screw-gripping• No protrusion• End-Lock: screw blocks to prevent turn
through the plate• Internal-Fixator-Effect• Easy screw-pick-up and improved
auto-gripping mechanism
• Autorroscantes• Disponibles con cabeza roscada y no
roscada (estándar)• TX-Lock para un óptimo agarre y transmisión
de fuerzas al roscar y apretar el tornillo • Se enroscan totalmente enrasados con la placa• End-Lock: el tornillo se autobloquea para evitar
que atraviese por la placa• Efecto fijador interno• Agarre automático simple mediante
dispositivo altamente perfeccionado
• Modularer Aufbau• Funktioneller Einsatz• Spezielle Eignung für Vor- und Rückfuß• Durchgehende Farbcodierung• Standard- und winkelstabile Ausführung• Winkelstabil zur Stabilitätserhöhung und
Reduzierung von Mikrobewegungen
• Modular systems• Functional use• Specially designed for fore-
and rear-foot surgery• Color coding system• Standard and locking screws-system available• High stability and less micro-movements
by locking screw-system
• Sistemas modulares• Uso funcional• Diseñado especialmente para antepie y retropie• Sistema de códigos de colores• Disponible como sistema estándar o con
rosca en la cabeza• Los tornillos de cabeza roscada proporcionan
alta estabilidad y menos micro movimientos
• Titan• Biokompatibel• Oberflächenanodisiert mit einheitlicher,
durchgehender Passivschicht
• Titanium• Biocompatible• Anodized with homogeneous,
surface passivation layer
• Titanio• Biocompatible• Material anodizado con una capa pasiva
homogéna y continuada
2
Die Platten, The Plates, Las Placas
• Höchste Belastbarkeit• Optimaler Kraftschluss• CAD-berechnete Last- bzw. Kraftübertragung
für kleinere Implantatedimensionen • Reduzierung der Überlastung von Kochen
oder Implantat
• Maximum strength• Optimal strength distribution• CAD-calculated transmission of load and
strength at minimized plate designs • Stress reduction of bone and implant
• Máxima capacidad de carga• Óptima distribución de fuerzas• Cálculos CAD de la transmisión de cargas y
fuerzas sobre los implantes con un diseños minimizados
• Reducción de la sobrecarga sobre hueso e implante
• Anatomisch vorgeformt• Garantie für schnelles Anbringen• Vermeidung von Gefügeveränderungen durch
zu starkes Nachbiegen• Geometrische Schraublochanordnung• Unidirektionale Winkelstabilität und Geometrie
vermeiden, dass Schrauben aufeinandertreffen• Überkreuzung der Schrauben für überdurch-
schnittliche Stabilität im Knochen
• Anatomically pre-shaped• Quick fixation guaranteed• Prevention of structure alterations by
excessive plate-bending• Geometric hole-configurations• Unidirectional locking system and plate
geometry prevent screw obstruction• High stability by crosswise used
locking screws
3
• Congruentes y anatómicamente preformadas
• Fijación rápida• El doblado excesivo de la placa no modifica
las líneas de fuerza de su estructura• Configuraciones geométricas de los orificios• Los tornillos con cabeza roscada unidirecional
y la geometria de las placas evitan que sechoquen entre sí los tornillos
• Los tornillos roscados a la placa, en doble dirección respecto al eje del hueso, proporcionan una alta estabilidad al sistema
Die Winkelstabilität, Locking-Screw System, Sistema tornillos con cabeza roscada
Lagerung und Sterilisation, Normed Modulares Vorfuß Titan-Osteosynthese System, 2.7
Storage and SterilizationNormed Modular Forefoot Titanium-Osteosynthesis System, 2.7
Soportes y EsterilizaciónNormed Sistema modular de titanio para osteosíntesis del ante-pie, 2.7
Cat.No.: 509 003000Sterilisationscontainer 310 x 190 x 135 mmSterilization Container 310 x 190 x 135 mmContenedor 310 x 190 x 135 mm
Cat.No.: 509 003100Instrumentensiebschale, alleinInstrument tray, onlyBandeja para instrumental, sola
Cat.No.: 509 002191Modularer Implantatebehälter, alleinfür Titan Vorfuß-Rekonstruktionssystem 2.7Modular implant tray, only, for titanium forefoot reconstruction system 2.7Soporte modular, solo, para implates sistemade reconstrucción del ante-pie 2.7
4
Cat.No.: 509 002190Modularer Implantatebehälter, alleinfür Titan-Osteosynthese System 2.7Modular implant tray, only, for Titanium Ostesynthesis System 2.7Soporte modular, solo, para implates sistema de osteosíntesis del ante-pie 2.7
Lagerung und Sterilisation, Normed Modulares Rückfuß Titan-Osteosynthese System, 3.5
Storage and SterilizationNormed Modular Rear-Foot Titanium-Osteosynthesis System, 3.5
Soportes y EsterilizaciónNormed sistema modular de titanio para osteosíntesis del retro-pie, 3.5
Cat.No.: 509 002114Sterilisationscontainer 300 x 300 x 135 mmSterilization Container 300 x 300 x 135 mmContenedor 300 x 300 x 135 mm
Cat.No.: 509 002104Sterilisationscontainer 300 x 140 x 100 mmSterilization Container 300 x 140 x 100 mmContenedor 300 x 140 x 100 mm
Cat.No.: 509 003200Instrumentensiebschale, alleinInstrument tray, onlyBandeja para instrumental, sola
Cat.No.: 509 003300Implantatbehälter allein, für Rückfußimplantate,zur Lagerung aller ImplantatsystemeImplant tray, only, for Rear-Foot implantssystem to hold all Rear-Foot implant systemsSoporte para implantes, solo, sistema retro-pie
5
Cat.No.: 509 002151Instrumentensiebschale, allein, für EinzelsystemeInstrument tray, only, for single tray Bandeja para instrumental, sola
Cat.No.: 509 002150Implantatebehälter, allein, für EinzelsystemLapidus-KalkaneusImplant tray, only, for single tray system, Lapidus-CalcaneusSoporte para implantes, solo, Lapidus-Calcaneo
Katalog-Nr. Abbildungen Basis-Satz Inhalt System BeschreibungCat. No. Illustrations Basic-Set Contents DescriptionRef. Ilustraciones Set básico Descripción
28.28.120 1 Click-Off SchraubendrehergriffClick-off screwdriver handleClick-off, mango destornillador
28.28.110 1 Click-off SchraubendreherklingeClick-off Screwdriver bladeClick-off, punta destornillador
28.60.000 1 Einschläger für Titan Mini Staples, geradeImpactor for Titanium Mini Staples, straightImpactor para mini-grapas de titanio, recta
28.60.001 1 Einschläger für Titan Mini Staples, abgewinkeltImpactor for Titanium Mini Staples, angledImpactor para mini-grapas de titanio, angulado
503 004262 1 TiefenmesslehreDepth gaugeMedidor de profundidad
503 004170 1 Bohrlehrenaufsatz, allein, mit GewindespitzeDrill guide, only, threaded tipGuía para broca, sola, atornillable
503 004169 1 Bohrlehrenaufsatz, allein, mit GewindespitzeDrill guide, only, threaded tipGuía para broca, sola, atornillable
503 004124 2 Flachbiegezange, 13,5 cmBending plier, flat, 13,5 cmPinza plana, 13,5 cm
503 004250 1 Platten- und SchraubenhaltepinzettePlate- and screw holding forcepsPinza portaplacas y tornillos
503 004267 1 Schraubendreher TX6, kanüliert, für Micro-CBS/ Micro Scarf SchraubenScrewdriver TX6, cannulated, for Micro CBS/Micro Scarf screwsDestornillador TX6, canulado, para tornillos Micro CBS /Micro Scarf
INSTRUMENTARIUM UND WERKZEUGEINSTRUMENTS AND TOOLS
INSTRUMENTAL Y ACCESORIOS
2.7
3.5
6
Katalog-Nr. Abbildungen Basis-Satz Inhalt System BeschreibungCat. No. Illustrations Basic-Set Contents DescriptionRef. Ilustraciones Set básico Descripción
503 004270 1 Schraubendreher TX8, kanüliert, für Standard/High CBS Scarf SchraubenScrewdriver TX8, cannulated, for Standard/high CBS Scarf screwsDestornillador TX8, canulado, para tornillos Scarf, standard/high CBS
503 004268 1 Schraubendreher TX8, für Vorfuß-Osteosyntheseschrauben 2,7 mmScrewdriver TX8, for Forefoot Osteosynthesis screws 2,7 mmDestornillador TX8, para tornillos de osteosíntesis del ante-pie, 2,7 mm
503 004260 1 Schraubendreher hexagonal, für 3,5 mm SchraubenScrewdriver hexagon for 3,5 mm screws Destornillador hexagonal, para tornillos 3,5 mm
503 004261 1 Schraubendreher hexagonal, kanüliert für 3,5 mm HohlschraubenScrewdriver hexagon,for 3,5 mm cannulated screwsDestornillador hexagonal, para tornillos canulados 3,5 mm
503 004157 1 Handgriff für Bohrlehrenaufsatz503 004169 und 503 004170Handle for drill guide 503 004169 and 503 00 4170Mango para guía broca 503 004169 y 503 004170
2.7
3.5
7
Katalog-Nr. Abbildungen Basis-Satz Inhalt System BeschreibungCat. No. Illustrations Basic-Set Contents DescriptionRef. Ilustraciones Set básico Descripción
502 015204 1 Spiralbohrer 1,5x70mm, 20 mm Stop,Stryker-Ansatz, für Titan Mini StaplesDrill bit 1,5x70 mm, 20 mm Stop,Stryker fitting, for Titan Mini staplesBroca 1,5x70mm, 20mm Stop, Stryker para mini-grapas titanio
2.7
3.5
Mini-StaplesMini-grapas
BohrerDrill bitsBrocas
Katalog-Nr. Abbildungen Basis-Satz Inhalt System BeschreibungCat. No. Illustrations Basic-Set Contents DescriptionRef. Ilustraciones Set básico Descripción
503 004341 1 Kopfraumfräser, kanüliert, für Micro CBS SchraubenCountersink for Micro CBS screwsAvellanador canulado para tornillos Micro-CBS/Scarf
503 004342 1 Kopfraumfräser, kanüliert, für Standard/high CBS SchraubenCountersink for Standard/high CBS ScrewsAvellanador canulado para tornillos CBS/Scarf estándar y alta compresión
503 004345 1 Längenmesslehre über K-Draht 100 x 0,9 mmfür alle CBS SchraubenLength measuring device using K-Wire 100 x 0,9 mm, for all CBS screwsMedidor para tornillos CBS, utilizando agujas Kirschner 100 x 0,9 mm
502 015206 1 Spiralbohrer 2,0 x 105mm, Stryker- Ansatz, für 2,7 mm SchraubenDrill bit 2,0x105 mm, Stryker fitting,for 2,7 mm screws Broca 2,0x105mm, Stryker, para tornillos 2,7 mm
502 015207 1 Spiralbohrer 2,0 x 105 mm, AO- Ansatz, für 2,7 mm SchraubenDrill bit 2,0 x 105 mm, AO fitting,for 2,7 mm screwsBroca 2,0 x 105 mm, AO, para tornillos 2,7 mm
502 015136 1 Spiralbohrer 2,5 x 94 mm, Stryker- Ansatz, für 3,5 mm Schrauben, Stop 26 mmDrill bit 2,5 x 94 mm, Stryker fitting,for 3,5 mm screws, Stop 26 mmBroca 2,5 x 94 mm, Stryker, para tornillos 3,5 mm, Stop 26 mm
502 015137 1 Spiralbohrer 2,5 x 87 mm, AO- Ansatz, für 3,5 mm Schrauben, Stop 26 mmDrill bit 2,5 x 94 mm, AO fitting,for 3,5 mm screws, Stop 26 mmBroca 2,5 x 94 mm, AO, para tornillos 3,5 mm, Stop 26 mm
2.7
3.5
8
CBS / Scarf
Micro-CBS/Scarf
Micro-CBS/Scarf
CBS / Scarf
BohrerDrill bitsBrocas
Katalog-Nr. Abbildungen Basis-Satz Inhalt System BeschreibungCat. No. Illustrations Basic-Set Contents DescriptionRef. Ilustraciones Set básico Descripción
502 015620 1 Spiralbohrer 2,5 mm kanüliert, Rundschaft, für 3,5 mm HohlschraubenDrill bit 2,5 mm cannulated, round-end, for 3,5 mm cannulated screwsBroca 2,5 mm canulada, redonda, para tornillos canulados 3,5 mm
2.7
3.5
Katalog-Nr. Abbildungen Basis-Satz Inhalt System BeschreibungCat. No. Illustrations Basic-Set Contents DescriptionRef. Ilustraciones Set básico Descripción
22.27.609 1 Kirschner Draht 100 x 0,9 mm, Trokar/rund, Pack/6 St. K-Wires 100 x 0,9 mm, trocar/round, pack/6 eachAgujas Kirschner 100 x 0,9 mm, trocar/redonda, paq./6 unid.
22.27.611 1 Kirschner Draht 100 x 1,1 mm, Trokar/rund, Pack/6 St. K-Wires 100 x 1,1 mm, trocar/round, pack/6 eachAgujas Kirschner 100 x 1,1 mm, trocar/redonda, paq./6 unid.
22.27.613 1 Kirschner Draht 100 x 1,3 mm, Trokar/rund, Pack à 6 Stück K-Wires 100 x 1,3 mm, trocar/round, pack of 6 eachAgujas Kirschner 100 x 1,3 mm, trocar/redonda, paq./6 unid.
2.7
3.5
9
BohrerDrill bitsBrocas
Kirschner DrähteK-Wires
Agujas Kirschner
Micro-CBSMicro-Scarf
Hohl-schraubencannulated
screwstornillos
canulados
Titan Vorfuß-Rekonstruktionssystem 2.7Titanium Forefoot Reconstruction System 2.7
Sistema de titanio para reconstruccíon del ante-pie 2.7
• 8 verschiedene Mini-Modelle,gerade und gewinkelt
• ideal zur Fixierung der Akin Osteotomie
• 8 different styles, straight and angled• ideal for fixation of Akin osteotomies
• 8 modelos diferentes rectos y angulados• ideal para la osteotomía de Akin
A1
Titan Mini StaplesTitanium Mini StaplesMini-Grapas de titanio
Katalog-Nr. Abbildungen Basis-Satz Inhalt BeschreibungCat. No. Illustrations Basic-Set Contents DescriptionRef. Ilustraciones Set básico Descripción
28.60.008 1 Titan Mini Staple 8 x 8 mm, 1,5 mm, 90°Titanium Mini Staple 8 x 8 mm, 1,5 mm, 90°Mini-Grapa de titanio 8 x 8 mm, 1,5 mm, 90°
28.60.010 1 Titan Mini Staple 8 x 10 mm, 1,5 mm, 90°Titanium Mini Staple 8 x 10 mm, 1,5 mm, 90°Mini-Grapa de titanio 8 x 10 mm, 1,5 mm, 90°
28.60.110 1 Titan Mini Staple 10 x 10 mm, 1,5 mm, 90°Titanium Mini Staple 10 x 10 mm, 1,5 mm, 90°Mini-Grapa de titanio 10 x 10 mm, 1,5 mm, 90°
28.60.112 1 Titan Mini Staple 12 x 10 mm, 1,5 mm, 90°Titanium Mini Staple 12 x 10 mm, 1,5 mm, 90°Mini-Grapa de titanio 12 x 10 mm, 1,5 mm, 90°
28.60.208 1 Titan Mini Staple 8 x 8 mm, 1,5 mm, 63°Titanium Mini Staple 8 x 8 mm, 1,5 mm, 63°Mini-Grapa de titanio 8 x 8 mm, 1,5 mm, 63°
Katalog-Nr. Abbildungen Basis-Satz Inhalt BeschreibungCat. No. Illustrations Basic-Set Contents DescriptionRef. Ilustraciones Set bàsico Descripciòn
28.28.011 1 Titanschraube, Click-off, 11 x 2,0 mmTitanium screw, Click-off, 11 x 2,0 mmTornillo titanio, Click-off, 11 x 2,0 mm
28.28.012 1 Titanschraube, Click-off, 12 x 2,0 mmTitanium screw, Click-off, 12 x 2,0 mmTornillo titanio, Click-off, 12 x 2,0 mm
28.28.013 1 Titanschraube, Click-off, 13 x 2,0 mmTitanium screw, Click-off, 13 x 2,0 mmTornillo titanio, Click-off, 13 x 2,0 mm
28.28.014 1 Titanschraube, Click-off, 14 x 2,0 mmTitanium screw, Click-off, 14 x 2,0 mmTornillo titanio, Click-off, 14 x 2,0 mm
28.28.015 1 Titanschraube, Click-off, 15 x 2,0 mmTitanium screw, Click-off, 15 x 2,0 mmTornillo titanio, Click-off, 15 x 2,0 mm
• Einfaches twist off System• Kompressionsschrauben für die schnelle
Fixation von Osteotomien, insbesondere der Weil Osteotomie
• Schnell und einfach anzubringen und über die Sollbruchstelle abzulösen
• Easy twist off System• Compression Screws for rapid fixation of
osteotomies, especially the Weil Osteotomy• Easy to place and to release at the defined
breakable tip
• Simple sistema twist off• Tornillos de compresión para fijación rápida
de osteotomías, especialmente en Weil• Fàcil aplicación y desprendimiento mediante
sistema twist off
A2
Click-off KompressionsschraubenClick-off Compression Screws
Click-off Tornillos de compresión
Katalog-Nr. Abbildungen Basis-Satz Inhalt BeschreibungCat. No. Illustrations Basic-Set Contents DescriptionRef. Ilustraciones Set básico Descripción
28.60.210 1 Titan Mini Staple 8 x 10 mm, 1,5 mm, 63°Titanium Mini Staple 8 x 10 mm, 1,5 mm, 63°Mini-Grapa de titanio 8 x 10 mm, 1,5 mm, 63°
28.60.310 1 Titan Mini Staple 10 x 10 mm, 1,5 mm, 63°Titanium Mini Staple 10 x 10 mm, 1,5 mm, 63°Mini-Grapa de titanio 10 x 10 mm, 1,5 mm, 63°
28.60.312 1 Titan Mini Staple 12 x 10 mm, 1,5 mm, 63°Titanium Mini Staple 12 x 10 mm, 1,5 mm, 63°Mini-Grapa de titanio 12 x 10 mm, 1,5 mm, 63°
2,0 4,0
Katalog-Nr. Abbildungen Basis-Satz Inhalt BeschreibungCat. No. Illustrations Basic-Set Contents DescriptionRef. Ilustraciones Set básico Descripción
28.28.016 1 Titanschraube, Click-off, 16 x 2,0 mmTitanium screw, Click-off, 16 x 2,0 mmTornillo titanio, Click-off, 16 x 2,0 mm
28.28.017 1 Titanschraube, Click-off, 17 x 2,0 mmTitanium screw, Click-off, 17 x 2,0 mmTornillo titanio, Click-off, 17 x 2,0 mm
28.28.018 1 Titanschraube, Click-off, 18 x 2,0 mmTitanium screw, Click-off, 18 x 2,0 mmTornillo titanio, Click-off, 18 x 2,0 mm
28.28.019 1 Titanschraube, Click-off, 19 x 2,0 mmTitanium screw, Click-off, 19 x 2,0 mmTornillo titanio, Click-off, 19 x 2,0 mm
28.28.020 1 Titanschraube, Click-off, 20 x 2,0 mmTitanium screw, Click-off, 20 x 2,0 mmTornillo titanio, Click-off, 20 x 2,0 mm
28.28.021 1 Titanschraube, Click-off, 21 x 2,0 mmTitanium screw, Click-off, 21 x 2,0 mmTornillo titanio, Click-off, 21 x 2,0 mm
28.28.022 1 Titanschraube, Click-off, 22 x 2,0 mmTitanium screw, Click-off, 22 x 2,0 mmTornillo titanio, Click-off, 22 x 2,0 mm°
28.28.024 1 Titanschraube, Click-off, 24 x 2,0 mmTitanium screw, Click-off, 24 x 2,0 mmTornillo titanio, Click-off, 24 x 2,0 mm
28.28.026 * optional Titanschraube, Click-off, 26 x 2,0 mmTitanium screw, Click-off, 26 x 2,0 mmTornillo titanio, Click-off, 26 x 2,0 mm
28.28.028 * optional Titanschraube, Click-off, 28 x 2,0 mmTitanium screw, Click-off, 28 x 2,0 mmTornillo titanio, Click-off, 28 x 2,0 mm
28.28.030 * optional Titanschraube, Click-off, 30 x 2,0 mmTitanium screw, Click-off, 30 x 2,0 mmTornillo titanio, Click-off, 30 x 2,0 mm
A3
2,0 4,0
A4
Katalog-Nr. Abbildungen Basis-Satz Inhalt BeschreibungCat. No. Illustrations Basic-Set Contents DescriptionRef. Ilustraciones Set básico Descripción
515 010070 1/Pk; Paq 10 mm
515 012070 1/Pk; Paq 12 mm
515 014070 1/Pk; Paq 14 mm
515 016070 1/Pk; Paq 16 mm
515 018070 1/Pk; Paq 18 mm
515 020070 1/Pk; Paq 20 mm
515 022070 1/Pk; Paq 22 mm
515 024070 1/Pk; Paq 24 mm
515 026070 1/Pk; Paq 26 mm
515 028070 1/Pk; Paq 28 mm
519 010050 1/Pk; Paq 10 mm
519 012050 1/Pk; Paq 12 mm
519 014050 1/Pk; Paq 14 mm
519 016050 1/Pk; Paq 16 mm
519 018050 1/Pk; Paq 18 mm
• Lieferbar in den Ausführungen- Standard Kompression- Hohe Kompression- Mikro Scarf Miniaturschraube
• Universell einsetzbare, kanülierte Doppel -gewindeschrauben für die Vorfußchirurgie - Kanülierung auch bei Micro Scarf- Selbstbohrend, bei weichem Knochen sind
Vorbohrer und Kopfraumfräse nicht zwingenderforderlich
- Farblich codierte Oberfläche der verschiedenen Modelle
• Available with- Standard Compression- High Compression- as Micro Scarf Miniatur Screw
• Universal usage, cannulated double-threaded screws for forefoot surgery - Canulation also with the Micro Scarf Screw- Self-drilling; with soft bone pre-drilling as
well as countersinks are not necessarily required
- Colour coded surface of the different patterns
• Disponible con- Compresión estándar- Compresión alta- Micro-tornillo para Scarf
• Tornillo universal, canulado y con doble rosca, para la cirugía del ante-pie- Micro-tornillo canulado- Auto-brocante, avellanado y brocar no
necesario en hueso blando- Código de colores para diferentes modelos
CBS KompressionsschraubenCBS Compression Bone ScrewsCBS tornillos de compresión
Scarf-Micro Schraube, kanüliert, TX-Lock, TX6Scarf- Micro Screw, cannulated, TX-Lock, TX6Scarf- Micro Tornillo, canulado, TX-Lock, TX6
Scarf – Austin/Chevron – Closing Wedge – Ludloff – Akin – Youngswick – Reverdin-Green - ...
Scarf Schraube, standard Kompression, kanüliert,TX-Lock, TX8Scarf Screw, standard compression, cannulated, TX-Lock, TX8Scarf Tornillo, comprésion estándar, canulado, TX-Lock, TX8
2,5 3,2
1,6
3,0 3,9
2,0
Katalog-Nr. Abbildungen Basis-Satz Inhalt BeschreibungCat. No. Illustrations Basic-Set Contents DescriptionRef. Ilustraciones Set bàsico Descripciòn
519 020050 1/Pk; Paq 20 mm
519 022050 1/Pk; Paq 22 mm
519 024050 1/Pk; Paq 24 mm
519 026050 1/Pk; Paq 26 mm
519 028050 1/Pk; Paq 28 mm
519 030050 1/Pk; Paq 30 mm
519 010150 1/Pk; Paq 10 mm
519 012150 1/Pk; Paq 12 mm
519 014150 1/Pk; Paq 14 mm
519 016150 1/Pk; Paq 16 mm
519 018150 1/Pk; Paq 18 mm
519 020150 1/Pk; Paq 20 mm
519 022150 1/Pk; Paq 22 mm
519 024150 1/Pk; Paq 24 mm
519 026150 1/Pk; Paq 26 mm
519 028150 1/Pk; Paq 28 mm
519 030150 1/Pk; Paq 30 mm
Scarf Schraube, standard Kompression, kanüliert, TX-Lock, TX8Scarf Screw, standard compression, cannulated, TX-Lock, TX8Scarf Tornillo, comprésion estándar, canulado, TX-Lock, TX8
Scarf Schraube, starke Kompression, kanüliert, TX-Lock, TX8Scarf Screw, high compression, cannulated, TX-Lock, TX8Scarf Tornillo, comprésion alta, canulado, TX-Lock, TX8
A5
3,0 3,9
2,0
3,0 3,9
2,0
B1
Modulares Titan-Plattensystem, Vorfußchirurgie 2.7Modular Titanium Plating-System, Forefoot 2.7
Sistema modular de placas de titanio, Ante-Pie 2.7
"Open-Wedge" Platten-SetTitanplatten mit Zwischenstegen zur Stabilisierung von Basis-Osteotomien.
• Einfache OP-Technik• Extra flaches und schlankes Design mit
opti maler Stabilität• Anatomisch vorgeformter Plattenradius• Stegbreiten von 0 bis 8 mm
Die unterschiedlichen Zwischenstege der Titan -platten erlauben eine präzise Korrektur des Inter-metatarsale-Winkels. Das Plattenmodell 0, ohneSteg, bietet stabile Fixierungen verschiedensterBasis-Osteotomien, z.B Opening-Wedge, Closing-Wedge und Crescentic- Osteotomie am MT 1.
"Open-Wedge" Plating SetTitanium plates with stem for baseosteotomies.
• Easy surgical technique• Extremely flat and slim design with
optimal stability• Anatomically pre-shaped plate radius• Stems available from 0 to 8 mm
The different stem widths allow for a precise correction of the intermetatarsal angle.The plate without stem is used for a varietyof base osteotomies like Closing Wedge orCrescentic osteotomy at MT 1.
Sistema de placas "Open-Wedge"Placas de titanio con espaciadores paraestabilización de osteomías de la base.
• Técnica quirúrgica fácil• Diseño plano y fino con estabilidad óptima• Placas 1/3 caña pre-formadas anatomicamente• Espaciadores disponibles desde 0 a 8 mm
Los diferentes espaciadores permiten una corrección precisa del angulo intermetatarsal. La placa neutra (sin espaciador) se empleaen osteotomías de cuña cerrada y Crescentic.
Titan Fixations-System mit Ø 2,7 mm Titan -schrauben, in winkelstabilem Design und Standarddesign.
Titanium Fixation System with 2,7 mm diam. screws, available as locking screws and standard screws.
1.1 mm
Sistema de fijación de titanio con 2,7 mmtornillos, disponibles con cabeza roscaday estándar.
B2
Universalplatten-SetUniverselle 4-Loch-Modelle zur Stabilisierung zahlreicher Arthrodesen und Osteotomien.
• Multifunktionales, flaches, schlankes Design• Stabil und universell einsetzbar• Anatomisch vorgeformter Plattenradius• Verschiedene Längen verfügbar
Die multifunktionale Titanplatten sind anwendbarfür Basis-Osteotomien, z.B.Closing-Wedge-, Opening-Wedge- und Crescentic-Osteotomie sowieauch bei Interpositions- und Großzehengrund -gelenks-Arthrodesen oder bei Revisionseingriffen.
Universal Plating SetUniversal 4-hole titan plates to stabilizea variety of arthrodesis and osteotomies.
• Multifunctional, flat and slim design• Stable and universal use• Anatomically pre-shaped plate radius• Different lengths available
This multifuncitional titan plate is useful for baseosteotomies, e.g. Closed-Wedge, Open-Wedge andCrescentic. This rigid plate is also suitable forLisfranc fusions, MPJ fusions or revisions of non-unions.
Sistema de placas Universal Placas universales de 4-orificios para esta-bilizar una multitud de artrodesis y osteotomías.
• Multifuncional, plano y diseño fino• Estable y uso universal• Placas anatómicas, 1/3 de caña pre-formadas• Diferentes longitudes disponibles
Esta placa multifuncional es muy útil paraosteotomías de la base, p.ej. Closed-Wedge,Open-Wedge y Crescentic. Por ser una placa rigida sirve para fusiones Lisfranc, del AMP y para revisiones de no-uniones.
Katalog-Nr. Abbildungen Basis-Satz Inhalt BeschreibungCat. No. Illustrations Basic-Set Contents DescriptionRef. Ilustraciones Set básico Descripción
28.32.000 1 Titan Open-Wedge Platte, 0 mmTitanium Open-Wedge Plate, 0 mmPlaca titanio Open-Wedge, 0 mm
28.32.003 1 Titan Open-Wedge Platte, 3 mmTitanium Open-Wedge Plate, 3 mmPlaca titanio Open-Wedge, 3 mm
28.32.004 1 Titan Open-Wedge Platte, 4 mmTitanium Open-Wedge Plate, 4 mmPlaca titanio Open-Wedge, 4 mm
28.32.005 1 Titan Open-Wedge Platte, 5 mmTitanium Open-Wedge Plate, 5 mmPlaca titanio Open-Wedge, 5 mm
28.32.006 1 Titan Open-Wedge Platte, 6 mmTitanium Open-Wedge Plate, 6 mmPlaca titanio Open-Wedge, 6 mm
28.32.007 * optional Titan Open-Wedge Platte, 7 mmTitanium Open-Wedge Plate, 7 mmPlaca titanio Open-Wedge, 7 mm
28.32.008 * optional Titan Open-Wedge Platte, 8 mmTitanium Open-Wedge Plate, 8 mmPlaca titanio Open-Wedge, 8 mm
1.4 mm
B3
Katalog-Nr. Abbildungen Basis-Satz Inhalt BeschreibungCat. No. Illustrations Basic-Set Contents DescriptionRef. Ilustraciones Set básico Descripción
28.01.110 * optional Titan Universal Platte, 10 mmTitanium Universal Plate, 10 mmPlaca titanio Universal, 10 mm
28.01.112 * optional Titan Universal Platte, 12 mmTitanium Universal Plate, 12 mmPlaca titanio Universal, 12 mm
28.01.114 1 Titan Universal Platte, 14 mmTitanium Universal Plate, 14 mmPlaca titanio Universal, 14 m
28.01.116 1 Titan Universal Platte, 16 mmTitanium Universal Plate, 16 mmPlaca titanio Universal, 16 mm
28.01.118 1 Titan Universal Platte, 18 mmTitanium Universal Plate, 18 mmPlaca titanio Universal, 18 mm
28.01.120 1 Titan Universal Platte, 20 mmTitanium Universal Plate, 20 mmPlaca titanio Universal, 20 mm
28.01.122 1 Titan Universal Platte, 22 mmTitanium Universal Plate, 22 mmPlaca titanio Universal, 22 mm
28.01.124 1 Titan Universal Platte, 24 mmTitanium Universal Plate, 24 mmPlaca titanio Universal, 24 mm
28.01.130 1 Titan Universal Platte, 30 mmTitanium Universal Plate, 30 mmPlaca titanio Universal, 30 mm
B4
MP-Gelenk Fusionsplatten-SetPlattensystem zur Stabilisierung vonGroßzehengrundgelenks-Arthrodesen.
• Platte mit 10°-Valgus-Winkel • Rechts und links verwendbar• Hochstabile, Über-Kreuz-Vierpunktverankerung• Anatomisch vorgeformter Plattenradius, flaches
und schlankes Design• Drei Größen verfügbar: S, M und L
Diese Stabilisierungsplatten eignen sich fürPrimär- und Interpositions-Arthrodesen am Großzehengrundgelenk sowie für Revisions -eingriffe, z.B. nach Keller-Brandes. Die Grösse S ist besonders für Primär-Arthrodesendes MPG geeignet, die Grössen M + L für Inter -positions-Arthrodesen. Evtl. verwendete Knocheninterponate können mitzusätzlichen Schrauben fixiert werden.
MP-Joint Fusion Plating SystemPlate-Sytem for stabilization of MP-Joint arthrodesis.
• Plate with 10° valgus angle• Can be used left and right side• High stability, crosswise fixed screws• Anatomically pre-shaped plate radius,
flat and slim design• Sizes available: S, M and L
This stabilisation plate is designed for inter -position-arthrodesis at the MP-Joint and for revisions with bone graft (e.g. Keller-Brandes).Size S is recommended for standard MP-Jointfusions. Size M/L are used for interpositioning or fusion with bone graft. The center holes facilitate bone graft fixation.
Sistema de placas para fusion "AMP"Sistema de placs para estabilizar la artrodesisen articulaciones MP.
• Placa con un ángulo de 10° de valgo• Uso bilateral (derecha y izquierda)• Diseño anatómico con 1/3 caña pre-formada• Diseño plano y fino• Tamaños disponibles: S, M y L
Esta placa esta diseñada para artrodesis de interposición en la articulación MTP y para revisiones en caso de no-uniónes. (p.ej.Keller-Brandes.) El tamaño S se utiliza para la fusión pri-maria (ej. con la técnica de copa y cono.)Los tamaños M/L se utiliza para la revisión y/ofijación con injerto óseo después de procedi-miento de Keller. Los orificions centrales facilitanla fijación de los injertos óseos.
Katalog-Nr. Abbildungen Basis-Satz Inhalt BeschreibungCat. No. Illustrations Basic-Set Contents DescriptionRef. Ilustraciones Set básico Descripción
28.05.013 1 Titan MP-Gelenk Fusionsplatte, 5-Loch, 28 mmTitanium MP-Joint Fusionplate, 5-holes, 28 mmPlaca titanio fusión AMP, 5-orificios, 28 mm
28.05.015 1 Titan MP-Gelenk Fusionsplatte, 6-Loch, 35 mmTitanium MP-Joint Fusionplate, 6-holes, 35 mmPlaca titanio fusión AMP, 6-orificios, 35 mm
28.05.115 1 Titan MP-Gelenk Fusionsplatte, 6-Loch, 45 mmTitanium MP-Joint Fusionplate, 6-holes, 45 mmPlaca titanio fusión AMP, 6-orificios, 45 mm
28.01.135 * optional Rekonstruktionsplatte, 6-Loch, 35 mm, konischReconstruction plate, 6-holes, 35 mm, conicalPlaca de reconstrucción, 6-orificos, 35 mm, cónico
28.01.140 * optional Rekonstruktionsplatte, 6-Loch, 40 mm, konischReconstruction plate, 6-holes, 40 mm, conicalPlaca de reconstrucción, 6-orificos, 40 mm, cónico
1.2 mm
1.4 mm
1.4 mm
C1
Vorfußchirurgie 2.7Forefoot 2.7
Ante-Pie 2.7
Titan Knochenschrauben, winkelstabil, 2,7 mmTitanium locking bone screws, 2,7 mm
Tornillos de titanio con crosca en la cabeza, 2,7 mm
Katalog-Nr. Abbildungen Basis-Satz Inhalt BeschreibungCat. No. Illustrations Basic-Set Contents DescriptionRef. Ilustraciones Set básico Descripción
* = optional* = opcional
28.25.008 * Titan Schraube, 2,7 x 8 mm, TX-Lock, (5/Pk)Titanium screw, 2,7 x 8 mm, TX-Lock (5/Pk)Tornillo de titanio, 2,7 x 8 mm, TX-Lock (5/Paq)
28.25.010 * Titan Schraube, 2,7 x 10 mm, TX-Lock, (5/Pk)Titanium screw, 2,7 x 10 mm, TX-Lock (5/Pk)Tornillo de titanio, 2,7 x 10 mm, TX-Lock (5/Paq)
28.25.012 1 Titan Schraube, 2,7 x 12 mm, TX-Lock, (5/Pk)Titanium screw, 2,7 x 12 mm, TX-Lock (5/Pk)Tornillo de titanio, 2,7 x 12 mm, TX-Lock (5/Paq)
28.25.014 1 Titan Schraube, 2,7 x 14 mm, TX-Lock, (5/Pk)Titanium crew, 2,7 x 14 mm, TX-Lock (5/Pk)Tornillo de titanio, 2,7 x 14 mm, TX-Lock (5/Paq)
28.25.016 1 Titan Sschraube, 2,7 x 16 mm, TX-Lock, (5/Pk)Titanium screw, 2,7 x 16 mm, TX-Lock (5/Pk)Tornillo de titanio, 2,7 x 16 mm, TX-Lock (5/Paq)
28.25.018 1 Titan Schraube, 2,7 x 18 mm, TX-Lock, (5/Pk)Titanium screw, 2,7 x 18 mm, TX-Lock (5/Pk)Tornillo de titanio, 2,7 x 18 mm, TX-Lock (5/Paq)
C2
Katalog-Nr. Abbildungen Basis-Satz Inhalt BeschreibungCat. No. Illustrations Basic-Set Contents DescriptionRef. Ilustraciones Set básico Descripción
* = optional* = opcional
28.25.020 1 Titan Schraube, 2,7 x 20 mm, TX-Lock, (5/Pk)Titanium screw, 2,7 x 20 mm, TX-Lock (5/Pk)Tornillo de titanio, 2,7 x 20 mm, TX-Lock (5/Paq)
28.25.022 1 Titan Schraube, 2,7 x 22 mm, TX-Lock, (5/Pk)Titanium screw, 2,7 x 22 mm, TX-Lock (5/Pk)Tornillo de titanio, 2,7 x 22 mm, TX-Lock (5/Paq)
28.25.024 1 Titan Schraube, 2,7 x 24 mm, TX-Lock, (5/Pk)Titanium screw, 2,7 x 24 mm, TX-Lock (5/Pk)Tornillo de titanio, 2,7 x 24 mm, TX-Lock (5/Paq)
28.25.026 1 Titan Schraube, 2,7 x 26 mm, TX-Lock, (5/Pk)Titanium screw, 2,7 x 26 mm, TX-Lock (5/Pk)Tornillo de titanio, 2,7 x 26 mm, TX-Lock 5/Paq)
28.25.028 1 Titan Schraube, 2,7 x 28 mm, TX-Lock, (5/Pk)itanium screw, 2,7 x 28 mm, TX-Lock (5/Pk)Tornillo de titanio, 2,7 x 28 mm, TX-Lock (5/Paq)
28.25.030 1 Titan Schraube, 2,7 x 30 mm, TX-Lock, (5/Pk)Titanium screw, 2,7 x 30 mm, TX-Lock (5/Pk)Tornillo de titanio, 2,7 x 30 mm, TX-Lock (5/Paq)
Titan Knochenschrauben, standard, 2,7 mmTitanium standard bone screws, 2,7 mm
Tornillos de titanio estándar, 2,7 mm
Katalog-Nr. Abbildungen Basis-Satz Inhalt BeschreibungCat. No. Illustrations Basic-Set Contents DescriptionRef. Ilustraciones Set básico Descripción
* = optional* = opcional
28.25.108 * Titan Schraube, 2,7 x 8 mm, TX-Lock, (5/Pk)Titanium screw, 2,7 x 8 mm, TX-Lock (5/Pk)Tornillo de titanio, 2,7 x 8 mm, TX-Lock (5/Paq)
28.25.110 * Titan Schraube, 2,7 x 10 mm, TX-Lock, (5/Pk)Titanium screw, 2,7 x 10 mm, TX-Lock (5/Pk)Tornillo de titanio, 2,7 x 10 mm, TX-Lock (5/Paq)
28.25.112 1 Titan Schraube, 2,7 x 12 mm, TX-Lock, (5/Pk)Titanium screw, 2,7 x 12 mm, TX-Lock (5/Pk)Tornillo de titanio, 2,7 x 12 mm, TX-Lock (5/Paq)
28.25.114 1 Titan Schraube, 2,7 x 14 mm, TX-Lock, (5/Pk)Titanium screw, 2,7 x 14 mm, TX-Lock (5/Pk)Tornillo de titanio, 2,7 x 14 mm, TX-Lock (5/Paq)
C3
Katalog-Nr. Abbildungen Basis-Satz Inhalt BeschreibungCat. No. Illustrations Basic-Set Contents DescriptionRef. Ilustraciones Set básico Descripción
* = optional* = opcional
28.25.116 1 Titan Schraube, 2,7 x 16 mm, TX-Lock, (5/Pk)Titanium screw, 2,7 x 16 mm, TX-Lock (5/Pk)Tornillo de titanio, 2,7 x 16 mm, TX-Lock (5/Paq)
28.25.118 1 Titan Schraube, 2,7 x 18 mm, TX-Lock, (5/Pk)Titanium screw, 2,7 x 18 mm, TX-Lock (5/Pk)Tornillo de titanio, 2,7 x 18 mm, TX-Lock (5/Paq)
28.25.120 1 Titan Schraube, 2,7 x 20 mm, TX-Lock, (5/Pk)Titanium screw, 2,7 x 20 mm, TX-Lock (5/Pk)Tornillo de titanio, 2,7 x 20 mm, TX-Lock (5/Paq)
28.25.122 1 Titan Schraube, 2,7 x 22 mm, TX-Lock, (5/Pk)Titanium screw, 2,7 x 22 mm, TX-Lock (5/Pk)Tornillo de titanio, 2,7 x 22 mm, TX-Lock (5/Paq)
28.25.124 1 Titan Schraube, 2,7 x 24 mm, TX-Lock, (5/Pk)Titanium screw, 2,7 x 24 mm, TX-Lock (5/Pk)Tornillo de titanio, 2,7 x 24 mm, TX-Lock (5/Paq)
28.25.126 1 Titan Schraube, 2,7 x 26 mm, TX-Lock, (5/Pk)Titanium screw, 2,7 x 26 mm, TX-Lock (5/Pk)Tornillo de titanio, 2,7 x 26 mm, TX-Lock (5/Paq)
28.25.128 1 Titan Schraube, 2,7 x 28 mm, TX-Lock, (5/Pk)Titanium screw, 2,7 x 28 mm, TX-Lock (5/Pk)Tornillo de titanio, 2,7 x 28 mm, TX-Lock (5/Paq)
28.25.130 1 Titan Schraube, 2,7 x 30 mm, TX-Lock, (5/Pk)Titanium screw, 2,7 x 30 mm, TX-Lock (5/Pk)Tornillo de titanio, 2,7 x 30 mm, TX-Lock (5/Paq)
D1
Modulares Titan-Plattensystem, Rückfußchirurgie 3.5Modular Rearfoot Titanium Plating System 3.5
Sistema de osteosíntesis modular de placas de titanio del retro-pie 3.5
"Lapidus" Platten-SetTitanplatten im Stufendesign zur Stabilisierungvon Rückfuß- und Fußwurzel-Arthrodesen.
• 7 Stufenvarianten von 0 bis 6 mm in der Plattenmitte für präzises Einstellen verschie -dener Rückfuß- und Fußwurzel-Arthrodesen
• Anatomisch vorgeformter Plattenradius• Hochstabile, Über-Kreuz-Vierpunktverankerung
Die Lapidus Platte wird überwiegend für dieArthrodese des TMT 1-Gelenkes eingesetzt (Lapidus-Arthrodese). Sie eignet sich allerdingsauch für verschiedene andere Arthrodesen wieCalcaneo-Cuboidale(CC)-Arthrodese oder die Naviculo-Cuneiforme(NC)-Arthrodese, für dieFixierung von Basis-Osteotomien am MT 1 sowiefür Charcot und zur Stabilisierung traumatischerInstabilitäten im Lisfrancbereich.
"Lapidus" Plating-SetTitanium plates with different steps ensuring highstability and adjustment of the arthodesis.
• 7 different steps from 0 - 6 mm ensure anexact correction
• Anatomically shaped plate radius• High stability by crosswise used locking screws
The "Lapidus" plate is used mainly for thearthodesis of TMT1 joint as well as for otherarthrodesis such as: Calcaneo-Cubioidale (CC) and Naviculo-Cuneiforme (NC) or osteotomies at MT 1, Charcot and instabilities of the Lisfrancarea.
Sistema placas "Lapidus"Placas de titanio con diferentes escalones asegurando la correcta artrodesis.
• 7 escalones desde 0 a 6 mm garantizan unacorrección anatómica de la artrodesis
• Radio 1/3 de caña preformado• Alta estabilidad por tornillos con cabeza
roscada insertados en doble orientación
La placa "Lapidus" se aplica especialmente para la artrodesis del TMT 1 así como para otrasartrodesis como: Calcaneo-Cuboidale (CC), Naviculo-Cuneiforme (NC) u osteotomías delMT 1, Charcot e inestabilidades en el áreaLisfranc.
Titan Fixationssystem mit Ø 3,5 mm Titan -schrauben, in winkelstabilem Design und Standarddesign.
Titanium Fixation System 3,5 mm titanium screws,available as locking and standard screws.
Sistema de fijación 3,5 mm con tornillos detitanio, disponibles con rosca en la cabezay estándar.
1.6 mm
D2
Katalog-Nr. Abbildungen Basis-Satz Inhalt BeschreibungCat. No. Illustrations Basic-Set Contents DescriptionRef. Ilustraciones Set básico Descripción
28.01.000 1 Titan Lapidus-Platte, ohne StufeTitanium Lapidus Plate, without stepPlaca titanio Lapidus, sin escalón
28.01.001 1 Titan Lapidus-Platte, 1 mm StufeTitanium Lapidus Plate, 1 mm stepPlaca titanio Lapidus, 1 mm escalón
28.01.002 1 Titan Lapidus-Platte, 2 mm StufeTitanium Lapidus Plate, 2 mm stepPlaca titanio Lapidus, 2 mm escalón
28.01.003 1 Titan Lapidus-Platte, 3 mm StufeTitanium Lapidus Plate, 3 mm stepPlaca titanio Lapidus, 3 mm escalón
28.01.004 1 Titan Lapidus-Platte, 4 mm StufeTitanium Lapidus Plate, 4 mm stepPlaca titanio Lapidus, 4 mm escalón
28.01.005 1 Titan Lapidus-Platte, 5 mm StufeTitanium Lapidus Plate, 5 mm stepPlaca titanio Lapidus, 5 mm escalón
28.01.006 1 Titan Lapidus-Platte, 6 mm StufeTitanium Lapidus Plate, 6 mm stepPlaca titanio Lapidus, 6 mm escalón
D3
Interpositions-Arthrodese-Platten-SetTitanplatten mit Zwischenstegen für Interpositions-Arthrodesen in der Fußwurzel.
• Hochstabile, Über-Kreuz-Vierpunktfixierung auf engstem Raum
• Eignung für osteoporotische Knochen • Anatomisch vorgeformter Plattenradius• Stegbreiten von 0 bis 8 mm verfügbar
Interpositionsplatten finden Anwendung bei derVerlängerung der medialen oder lateralen Säulebei Interpositions-Arthrodesen in der Fußwurzel,z.B. Talo-Navicular(TN)-Arthrodese, CC-Arthrodeseund NC-Arthrodese, sowie Evans-Osteotomien undTriple-Arthrodesen.Sie sind auch geeignet bei Defektsituationen, in denen ansonsten ein tricorticaler Beckenspan notwendig wäre. Die unterschiedlichen Stegbreitenerleichtern die präzise Einstellung der Arthrodese.
Interpositioning Arthrodesis Plate SetTitanium Plates with different stems for inter -positioning arthrodesis at the rearfoot.
• High stability by crosswise usedlocking screws
• Usefull for osteoporotic bones • Anatomically shaped plate radius• Stems from 0 to 8 mm available
Interpositioning plates are recommended for lengthening of the medial columns during intratarsal arthrodesis, such as talo-navicular TNarthrodesis, CC and NC arthrodesis, as well as forEvans and triple osteotomy. Different stem widths make an exact arthrodesis easier.
Sistema de placas para artrodesis de inter-posiciónamientoPlacas de titanio con diferentes puentes parala artrodesis de interposición en el retro-pie.
• Alta estabilidad por tornillos con cabeza roscada insertados en doble orientación
• Recomendado para huesos osteoporóticos• Placas de 1/3 caña anatomicamente
preformadas• Puentes desde 0 a 8 mm disponibles
Estas placas están recomendadas para alargarla columna medial durante la artrodesis intra -tarsal, como talonavicular TN, artrodesis CC y NC,así que osteotomías de Evans y triple. Variasanchuras de puentes garantizan y facilitan unaatrosdesis exacta.
Katalog-Nr. Abbildungen Basis-Satz Inhalt BeschreibungCat. No. Illustrations Basic-Set Contents DescriptionRef. Ilustraciones Set básico Descripción
28.02.000 1 Titan Interpositionsplatte, ohne StegTitanium Interpositioning Plate, without stemPlaca titanio de interposición, sin puente
28.02.002 1 Titan Interpositionsplatte, 2 mm StegTitanium Interpositioning Plate, 2 mm stemPlaca titanio de interposición, puente 2 mm
28.02.004 1 Titan Interpositionsplatte, 4 mm StegTitanium Interpositioning Plate, 4 mm stemPlaca titanio de interposición, puente 4 mm
28.02.006 1 Titan Interpositionsplatte, 6 mm StegTitanium Interpositioning Plate, 6 mm stemPlaca titanio de interposición, puente 6 mm
28.02.008 1 Titan Interpositionsplatte, 8 mm StegTitanium Interpositioning Plate, 8 mm stemPlaca titanio de interposición, puente 8 mm
1.6 mm
D4
Universalplatten-Set 3.5 Universelle 4-Loch-Modelle zur Stabilisierung zahlreicher Arthrodesen und Osteotomien.
• Multifunktoinales, flaches, schlankes Design• Stabil und universell einsetzbar• Anatomisch vorgeformter Plattenradius• Verschiedene Längen verfügbar
Die multifunktionale Titanplatte ist anwendbar bei Lisfranc- und isolierten Fußwurzel-Arthrodesen(CC, NC, und TN), bei Basis-Osteotomien , z.B. Closing-Wedge-, Opening-Wedge und Crescentic-Osteotomien, Interpositions- undGroßzehengrundgelenks-Arthrodesen. Neben denöffnenden Keil-Osteotomien am Calcaneus (Evans-Osteo tomie) und Cuboid, welche die laterale Säule verlängern, fixiert diese Platte auch alle Osteo -tomien und Arthrodesen, die zur Verlängerung der medialen Säule durchgeführt werden.
Universal Plating System 3.5Universal 4-hole plates for stabilisationof many arthrodesis and osteotomies.
• Multifunctional, flat and slim design• Stable and universal• Anatomically shaped radius• Different length available
This multifuncional plate is mainly used for Lisfranc- and isolated tarsal fusions such asCC, NC and TN, base osteotomies like Closing- /Open-Wedge (e.g. Evans), Crescentic, Inter -positioning arthrodesis and MP-Joint Fusion.
Sistema Universal 3.5Placas universales de 4 orificios para estabili-zación de muchas artrodesis y osteotomías.
• Diseño plano, fino y multifuncional• Colocación estable y universal • Forma anatómica 1/3 de caña• Diferentes longitudes disponibles
Esta placa se aplica especialmente en artrodesisLisfranc, fusiones tarsales como CC, NC y TN, osteotomías basales como Closing- / OpeningWedge (p.ej. Evans), Crescentic, artrodesis deinterposición y fusión AMP.
Katalog-Nr. Abbildungen Basis-Satz Inhalt BeschreibungCat. No. Illustrations Basic-Set Contents DescriptionRef. Ilustraciones Set básico Descripción
28.01.010 * optional Titan Universal-Platte, 10 mmTitanium Universal Plate, 10 mmPlaca titanio Universal, 10 mm
28.01.012 * optional Titan Universal-Platte, 12 mmTitanium Universal Plate, 12 mmPlaca titanio Universal, 12 mm
28.01.014 1 Titan Universal-Platte, 14 mmTitanium Universal Plate, 14 mmPlaca titanio Universal, 14 mm
28.01.016 1 Titan Universal-Platte, 16 mmTitanium Universal Plate, 16 mmPlaca titanio Universal, 16 mm
28.01.018 1 Titan Universal-Platte, 18 mmTitanium Universal Plate, 18 mmPlaca titanio Universal, 18 mm
1.6 mm
D5
Rearfoot Reconstruction Plating SystemMulti-hole plates for reconstructions andarthrodesis.
• Anatomically pre-shaped radius• High stability by locking screws used crosswise • 3 different models with 6, 8 and 14 holes
available
Multi-hole plates are specially designed for stabilization of the medial and lateral columnsfrom the talus to the metatarsals (e.g. flatfoot,Charcot).
Sistema de placas para reconstruccíon delRetro-Pie
• Placas 1/3 caña preformadas anatomicamente
• Alta estabilidad por tornillos con cabeza roscada insertados en doble orientación
• 3 modelos diferentes con 6, 8 y 14 orificios
Las placas con multi-orificios están diseñadospara estabilización de la columna medial y lateral del talón a las metatarsales (p.ej. píeplano, Charcot).
Katalog-Nr. Abbildungen Basis-Satz Inhalt BeschreibungCat. No. Illustrations Basic-Set Contents DescriptionRef. Ilustraciones Set básico Descripción
28.01.020 1 Titan Universal-Platte, 20 mmTitanium Universal Plate, 20 mmPlaca titanio Universal, 20 mm
28.01.022 1 Titan Universal-Platte, 22 mmTitanium Universal Plate, 22 mmPlaca titanio Universal, 22 mm
28.01.024 1 Titan Universal-Platte, 24 mmTitanium Universal Plate, 24 mmPlaca titanio Universal, 24 mm
28.01.030 1 Titan Universal-Platte, 30 mmTitanium Universal Plate, 30 mmPlaca titanio Universal, 30 mm
Rückfuß-Rekonstruktionsplatten-SetMulti-Lochplatten für komplexe Rekonstruktionenund Arthrodesen.
• Anatomisch vorgeformter Plattenradius• Hochstabile, Über-Kreuz-Schraubverankerung • Drei Grundmodelle mit 6, 8 und 14 Loch
verfügbar
Multi-Lochplatten sind besonders hilfreich bei derStabilisierung und Aufrichtung der medialen bzw.lateralen Säule und können auch mehrereArthrodesen, wie z.B. TN, NC und TMT 1, einschlie-ßen. Die Platten können individuell geschränkt,bzw. modelliert werden und somit den anatomi-schen Gegebenheiten angepasst werden, insbeson-dere auch bei der operativen Versorgung vonCharcot-Füßen.
1.6 mm
D6
"USG" Flache ArthrodesenplattenFlache und steife Arthrodesenplatte.
• Stabile Platte, 2mm Plattendicke• Flaches Plattendesign ohne Radius• 3 Längen verfügbar
Stabilisierungsplatten für isolierte Fußwurzel-Arthrodesen, Fixierung der Subtalar- und CC-Arthrodesen, Lisfranc-Arthrodesen und Arthro -desen zwischen den einzelnen Cuneiformia. Die vergleichsweise erhöhte Plattendicke und das flache Profil gewährleisten optimale Stärkeund Stabilität.
Flatline Arthrodesis Plate System
• Stable plate, 2 mm thickness• Flat design without radius• 3 different lengths available
Designed for isolated subtalar fusions, CC- andLisfranc-Arthrodesis between the individual cuneiformia.
Optimal strength and stability by flat profile and 2 mm plate thickness.
Sistema de Placas Flatline para artrodesis
• Placa estable, 2 mm grosor• Diseño plano sin caña• 3 diferentes longitudes disponibles
Diseñada para fusines aisladas subtalares, artrodesis de CC- y Lisfranc entre los diferentescuneiformes.
Fuerza óptima y estabilidad mediante perfíl plano con grosor de 2 mm.
Katalog-Nr. Abbildungen Basis-Satz Inhalt BeschreibungCat. No. Illustrations Basic-Set Contents DescriptionRef. Ilustraciones Set básico Descripción
28.03.006 1 Titan Multi-hole Platte, 6-Loch, 37 mmTitanium Multi-hole Plate, 6-holes, 37 mmPlaca titanio Multi-orificios, 6-agujeros, 37 mm
28.03.008 1 Titan Multi-hole Platte, 8-Loch, 50 mmTitanium Multi-hole Plate, 8-holes, 50 mmPlaca titanio Multi-orificios, 8-agujeros, 50 mm
28.03.014 1 Titan Multi-hole Platte, 14-Loch, 66 mmTitanium Multi-hole Plate, 14-holes, 66 mmPlaca titanio Multi-orificios, 14-agujeros, 66 mm
Katalog-Nr. Abbildungen Basis-Satz Inhalt BeschreibungCat. No. Illustrations Basic-Set Contents DescriptionRef. Ilustraciones Set básico Descripción
28.04.004 1 Titan USG Platte, 12 mmTitanium USG Plate, 12 mm Placa titanio USG, 12 mm
28.04.005 1 Titan USG Platte, 14 mmTitanium USG Plate, 14 mm Placa titanio USG, 14 mm
28.04.006 1 Titan USG Platte, 16 mmTitanium USG Plate, 16 mm Placa titanio USG, 16 mm
2.0 mm
D7
Umstellungsplatten-Set "Dwyer"
Platten im Stufendesign zur Stabilisierung vonUmstelllungs-Osteotomien am Fersenbein
• 2 mm stark für erhöhte Grundstabilität• 3 Stufenvarianten: 6, 8 und 10 mm
Das Stufendesign erlaubt eine präzise Positio -nierung und Fixation des distalen Fragments beizahlreichen Verschiebe-Osteotomien am Calca neus(MDO – Medial Displacement Ostetomy). Nebenden vier winkelstabilen Schrauben kann einezusätzlichen Standardschraube fixiert werden.
Calcaneus Displacement Plating System"Dwyer"Plates in step-design to stabilize medial displacement-osteotomies at the calcaneus.
• 2 mm profile for high stability• 3 different steps available: 6, 8 and 10 mm
The step-design allows for precise positioningand fixation of the distal fragments at differentdisplacement osteotomies at the calcaneus.Together with the locking screws, an additionalstandard screw can be fixed.
Sistema para desplazamiento de calcaneo"Dwyer"Placas en forma escalón para estabilizar desplazamiento medial del calcaneo.
• Perfíl de 2 mm para garantizar estabilidad• 3 escalones diferentes: 6, 8 y 10 mm
El diseño de las placas permite un posicionamientopreciso y una fijación óptima del fragmento distalen diferentes osteotomías del calcaneo. Un tornillo estándar adicional se puede colocarjunto con los tornillos de cabeza roscada.
Katalog-Nr. Abbildungen Basis-Satz Inhalt BeschreibungCat. No. Illustrations Basic-Set Contents DescriptionRef. Ilustraciones Set básico Descripción
28.06.106 1 Titan Dwyer Umstellungs-Platte, 6 mmTitanium Dwyer displacementplate, 6 mm Placa titanio Dwyer de desplazamiento, 6 mm
28.06.108 1 Titan Dwyer Umstellungs-Platte, 8 mmTitanium Dwyer displacementplate, 8 mm Placa titanio Dwyer de desplazamiento, 8 mm
28.06.110 1 Titan Dwyer Umstellungs-Platte, 10 mmTitanium Dwyer displacementplate, 10 mm Placa titanio Dwyer de desplazamiento, 10 mm
2.1 mm
D8
Calcaneus Platten-SetVielseitige, bewährte Platten für unterschiedlicheFersenbeinfrakturen.
• Transfixation des Calcaneo-Cuboid-Gelenks möglich
• Rechts und links verwendbar• Flexibel: nur 1,3 mm stark• 4 Größen: L, M, S und XS
Die relativ geringe Plattenstärke erlaubt ein sehrgenaues Modellieren und Anpassen der Platte andie Fragmente des Fersenbeins.
Calcaneus Plating SystemUniversal malleable plates for differentcalcaneus fractures.
• Transfixation of Calcaneus-Cuboid-Jointpossible
• Can be used for left and right side• Malleable, thickness of 1,3 mm only• 4 sizes available: L, M, S and XS
The reduced plate thickness allows for exactmodeling and adaption of the plate to the calcaneus fragments.
Sistema de Placas para CalaneoPlacas universales y maleables para diferentesfracturas calcaneas.
• Transfijación de la articulación Calcaneo-Cuboideo posible
• Utilizable para la derecha e izquierda• Malealbe, grosor de 1,3 mm • 4 medidas disponibles: L, M, S y XS
El grosor reducido permite una modelación yadaptación exacta de la placa a los fragmentoscalcaneos.
Katalog-Nr. Abbildungen Basis-Satz Inhalt BeschreibungCat. No. Illustrations Basic-Set Contents DescriptionRef. Ilustraciones Set básico Descripción
28.05.001 1 Titan Calcaneus-Platte, Grösse STitanium calcaneus plate, size S Placa titanio de calcaneo, tamaño S
28.05.002 1 Titan Calcaneus-Platte, Grösse MTitanium calcaneus plate, size M Placa titanio de calcaneo, tamaño M
28.05.003 1 Titan Calcaneus-Platte, Grösse LTitanium calcaneus plate, size LPlaca titanio de calcaneo, tamaño L
28.05.004 1 Titan Calcaneus-Platte, Grösse XSTitanium calcaneus plate, size XS Placa titanio de calcaneo, tamaño XS
1.3 mm
E1
Rückfußchirurgie 3.5Rearfoot 3.5
Retro-Pie 3.5
Titan Knochenschrauben, winkelstabil, 3,5 mmTitanium locking bone screws, 3,5 mm
Tornillos de titanio con crosca en la cabeza, 3,5 mm
Katalog-Nr. Abbildungen Basis-Satz Inhalt BeschreibungCat. No. Illustrations Basic-Set Contents DescriptionRef. Ilustraciones Set básico Descripción
* = optional* = opcional
28.20.008 * Titan Schraube, 3,5 x 8 mm, Hexagon-Lock, (5/Pk)Titanium screw, 3,5 x 8 mm, Hexagon-Lock (5/Pk)Tornillo de titanio, 3,5 x 8 mm, Hexagon-Lock (5/Paq)
28.20.010 * Titan Schraube, 3,5 x 10 mm, Hexagon-Lock, (5/Pk)Titanium screw, 3,5 x 10 mm, Hexagon-Lock (5/Pk)Tornillo de titanio, 3,5 x 10 mm, Hexagon-Lock (5/Paq)
28.20.012 * Titan Schraube, 3,5 x 12 mm, Hexagon-Lock, (5/Pk)Titanium screw, 3,5 x 12 mm, Hexagon-Lock (5/Pk)Tornillo de titanio, 3,5 x 12 mm, Hexagon-Lock(5/Paq)
28.20.014 * Titan Schraube, 3,5 x 14 mm, Hexagon-Lock, (5/Pk)Titanium screw, 3,5 x 14 mm, Hexagon-Lock (5/Pk)Tornillo de titanio, 3,5 x 14 mm, Hexagon-Lock (5/Paq)
28.20.016 * Titan Schraube, 3,5 x 16 mm, Hexagon-Lock, (5/Pk)Titanium screw, 3,5 x 16 mm, Hexagon-Lock (5/Pk)Tornillo de titanio, 3,5 x 16 mm, Hexagon-Lock (5/Paq)
28.20.018 * Titan Schraube, 3,5 x 18 mm, Hexagon-Lock, (5/Pk)Titanium screw, 3,5 x 18 mm, Hexagon-Lock (5/Pk)Tornillo de titanio, 3,5 x 18 mm, Hexagon-Lock (5/Paq)
28.20.020 1 Titan Schraube, 3,5 x 20 mm, Hexagon-Lock, (5/Pk)Titanium screw, 3,5 x 20 mm, Hexagon-Lock (5/Pk)Tornillo de titanio, 3,5 x 20 mm, Hexagon-Lock(5/Paq)
28.20.022 1 Titan Schraube, 3,5 x 22 mm, Hexagon-Lock, (5/Pk)Titanium screw, 3,5 x 22 mm, Hexagon-Lock (5/Pk)Tornillo de titanio, 3,5 x 22 mm, Hexagon-Lock (5/Paq)
E2
Titan Knochenschrauben, standard, 3,5 mmTitanium standard bone screws, 3,5 mm
Tornillos de titanio estándar, 3,5 mm
Katalog-Nr. Abbildungen Basis-Satz Inhalt BeschreibungCat. No. Illustrations Basic-Set Contents DescriptionRef. Ilustraciones Set básico Descripción
* = optional* = opcional
28.20.024 1 Titan Schraube, 3,5 x 24 mm, Hexagon-Lock, (5/Pk)Titanium screw, 3,5 x 24 mm, Hexagon-Lock (5/Pk)Tornillo de titanio, 3,5 x 24 mm, Hexagon-Lock (5/Paq)
28.20.026 1 Titan Schraube, 3,5 x 26 mm, Hexagon-Lock, (5/Pk)Titanium screw, 3,5 x 26 mm, Hexagon-Lock (5/Pk)Tornillo de titanio, 3,5 x 26 mm, Hexagon-Lock (5/Paq)
28.20.028 * Titan Schraube, 3,5 x 28 mm, Hexagon-Lock, (5/Pk)Titanium screw, 3,5 x 28 mm, Hexagon-Lock (5/Pk)Tornillo de titanio, 3,5 x 28 mm, Hexagon-Lock (5/Paq)
28.20.030 * Titan Schraube, 3,5 x 30 mm, Hexagon-Lock, (5/Pk)Titanium screw, 3,5 x 30 mm, Hexagon-Lock (5/Pk)Tornillo de titanio, 3,5 x 30 mm, Hexagon-Lock (5/Paq)
28.20.032 1 Titan Schraube, 3,5 x 32 mm, Hexagon-Lock, (5/Pk)Titanium screw, 3,5 x 32 mm, Hexagon-Lock (5/Pk)Tornillo de titanio, 3,5 x 32 mm, Hexagon-Lock(5/Paq)
28.20.035 1 Titan Schraube, 3,5 x 35 mm, Hexagon-Lock, (5/Pk)Titanium screw, 3,5 x 35 mm, Hexagon-Lock (5/Pk)Tornillo de titanio, 3,5 x 35 mm, Hexagon-Lock (5/Paq)
28.20.040 1 Titan Schraube, 3,5 x 40 mm, Hexagon-Lock, (5/Pk)Titanium screw, 3,5 x 40 mm, Hexagon-Lock (5/Pk)Tornillo de titanio, 3,5 x 40 mm, Hexagon-Lock (5/Paq)
28.20.045 1 Titan Schraube, 3,5 x 45 mm, Hexagon-Lock, (5/Pk)Titanium screw, 3,5 x 45 mm, Hexagon-Lock (5/Pk)Tornillo de titanio, 3,5 x 45 mm, Hexagon-Lock (5/Paq)
28.20.050 1 Titan Schraube, 3,5 x 50 mm, Hexagon-Lock, (5/Pk)Titanium screw, 3,5 x 50 mm, Hexagon-Lock (5/Pk)Tornillo de titanio, 3,5 x 50 mm, Hexagon-Lock (5/Paq)
Katalog-Nr. Abbildungen Basis-Satz Inhalt BeschreibungCat. No. Illustrations Basic-Set Contents DescriptionRef. Ilustraciones Set básico Descripción
* = optional* = opcional
28.20.108 * Titan Schraube, 3,5 x 8 mm, Hexagon-Lock, (5/Pk)Titanium screw, 3,5 x 8 mm, Hexagon-Lock (5/Pk)Tornillo de titanio, 3,5 x 8 mm, Hexagon-Lock (5/Paq)
28.20.110 * Titan Schraube, 3,5 x 10 mm, Hexagon-Lock, (5/Pk)Titanium screw, 3,5 x 10 mm, Hexagon-Lock (5/Pk)Tornillo de titanio, 3,5 x 10 mm, Hexagon-Lock (5/Paq)
28.20.112 * Titan Schraube, 3,5 x 12 mm, Hexagon-Lock, (5/Pk)Titanium screw, 3,5 x 12 mm, Hexagon-Lock (5/Pk)Tornillo de titanio, 3,5 x 12 mm, Hexagon-Lock (5/Paq)
E3
Katalog-Nr. Abbildungen Basis-Satz Inhalt BeschreibungCat. No. Illustrations Basic-Set Contents DescriptionRef. Ilustraciones Set básico Descripción
* = optional* = opcional
28.20.114 * Titan Schraube, 3,5 x 14 mm, Hexagon-Lock, (5/Pk)Titanium screw, 3,5 x 14 mm, Hexagon-Lock (5/Pk)Tornillo de titanio, 3,5 x 14 mm, Hexagon-Lock (5/Paq)
28.20.116 * Titan Schraube, 3,5 x 16 mm, Hexagon-Lock, (5/Pk)Titanium screw, 3,5 x 16 mm, Hexagon-Lock (5/Pk)Tornillo de titanio, 3,5 x 16 mm, Hexagon-Lock (5/Paq)
28.20.118 * Titan Schraube, 3,5 x 18 mm, Hexagon-Lock, (5/Pk)Titanium screw, 3,5 x 18 mm, Hexagon-Lock (5/Pk)Tornillo de titanio, 3,5 x 18 mm, Hexagon-Lock (5/Paq)
28.20.118 * Titan Schraube, 3,5 x 18 mm, Hexagon-Lock, (5/Pk)Titanium screw, 3,5 x 18 mm, Hexagon-Lock (5/Pk)Tornillo de titanio, 3,5 x 18 mm, Hexagon-Lock (5/Paq)
28.20.120 * Titan Schraube, 3,5 x 20 mm, Hexagon-Lock, (5/Pk)Titanium screw, 3,5 x 20 mm, Hexagon-Lock (5/Pk)Tornillo de titanio, 3,5 x 20 mm, Hexagon-Lock (5/Paq)
28.20.122 * Titan Schraube, 3,5 x 22 mm, Hexagon-Lock, (5/Pk)Titanium screw, 3,5 x 22 mm, Hexagon-Lock (5/Pk)Tornillo de titanio, 3,5 x 22 mm, Hexagon-Lock (5/Paq)
28.20.124 1 Titan Schraube, 3,5 x 24 mm, Hexagon-Lock, (5/Pk)Titanium screw, 3,5 x 24 mm, Hexagon-Lock (5/Pk)Tornillo de titanio, 3,5 x 24 mm, Hexagon-Lock(5/Paq)
28.20.126 1 Titan Schraube, 3,5 x 26 mm, Hexagon-Lock, (5/Pk)Titanium screw, 3,5 x 26 mm, Hexagon-Lock (5/Pk)Tornillo de titanio, 3,5 x 26 mm, Hexagon-Lock (5/Paq)
28.20.128 1 Titan Schraube, 3,5 x 28 mm, Hexagon-Lock, (5/Pk)Titanium screw, 3,5 x 28 mm, Hexagon-Lock (5/Pk)Tornillo de titanio, 3,5 x 28 mm, Hexagon-Lock (5/Paq)
28.20.130 1 Titan Schraube, 3,5 x 30 mm, Hexagon-Lock, (5/Pk)Titanium screw, 3,5 x 30 mm, Hexagon-Lock (5/Pk)Tornillo de titanio, 3,5 x 30 mm, Hexagon-Lock (5/Paq)
28.20.132 1 Titan Schraube, 3,5 x 32 mm, Hexagon-Lock, (5/Pk)Titanium screw, 3,5 x 32 mm, Hexagon-Lock (5/Pk)Tornillo de titanio, 3,5 x 32 mm, Hexagon-Lock (5/Paq)
28.20.135 1 Titan Schraube, 3,5 x 35 mm, Hexagon-Lock, (5/Pk)Titanium screw, 3,5 x 35 mm, Hexagon-Lock (5/Pk)Tornillo de titanio, 3,5 x 35 mm, Hexagon-Lock (5/Paq)
28.20.140 1 Titan Schraube, 3,5 x 40 mm, Hexagon-Lock, (5/Pk)Titanium screw, 3,5 x 40 mm, Hexagon-Lock (5/Pk)Tornillo de titanio, 3,5 x 40 mm, Hexagon-Lock (5/Paq)
28.20.145 1 Titan Schraube, 3,5 x 45 mm, Hexagon-Lock, (5/Pk)Titanium screw, 3,5 x 45 mm, Hexagon-Lock (5/Pk)Tornillo de titanio, 3,5 x 45 mm, Hexagon-Lock (5/Paq)
28.20.150 1 Titan Schraube, 3,5 x 50 mm, Hexagon-Lock, (5/Pk)Titanium screw, 3,5 x 50 mm, Hexagon-Lock (5/Pk)Tornillo de titanio, 3,5 x 50 mm, Hexagon-Lock (5/Paq)
E4
Kanülierte Schrauben aus Titan, 3,5 mmCannulated Screws, Titanium, 3,5 mm
Tornillos canulados de titanio, 3,5 mm
Katalog-Nr. Abbildungen Basis-Satz Inhalt GesamtlängeCat. No. Illustrations Basic-Set Contents Total lengthRef. Illustraciones Set bàsico Longitud total
28.22.025 1/Pk; Paq - optional, opcional - 3,5 x 25 mm, Hexagon-Lock
28.22.028 1/Pk; Paq - optional, opcional - 3,5 x 28 mm, Hexagon-Lock
28.22.030 1/Pk; Paq - optional, opcional - 3,5 x 30 mm, Hexagon-Lock
28.22.032 1/Pk; Paq 3,5 x 32 mm, Hexagon-Lock
28.22.034 1/Pk; Paq 3,5 x 34 mm, Hexagon-Lock
28.22.036 1/Pk; Paq 3,5 x 36 mm, Hexagon-Lock
28.22.038 1/Pk; Paq - optional, opcional - 3,5 x 38 mm, Hexagon-Lock
28.22.040 1/Pk; Paq - optional, opcional - 3,5 x 40 mm, Hexagon-Lock
28.22.045 1/Pk; Paq - optional, opcional - 3,5 x 45 mm, Hexagon-Lock
28.22.050 1/Pk; Paq - optional, opcional - 3,5 x 50 mm, Hexagon-Lock
28.22.055 1/Pk; Paq - optional, opcional - 3,5 x 55 mm, Hexagon-Lock
28.22.060 1/Pk; Paq - optional, opcional - 3,5 x 60 mm, Hexagon-Lock
28.22.125 1/Pk; Paq - optional, opcional - 3,5 x 25 mm, Hexagon-Lock
28.22.128 1/Pk; Paq - optional, opcional - 3,5 x 28 mm, Hexagon-Lock
28.22.130 1/Pk; Paq - optional, opcional - 3,5 x 30 mm, Hexagon-Lock
28.22.132 1/Pk; Paq 3,5 x 32 mm, Hexagon-Lock
28.22.134 1/Pk; Paq 3,5 x 34 mm, Hexagon-Lock
28.22.136 1/Pk; Paq 3,5 x 36 mm, Hexagon-Lock
28.22.138 1/Pk; Paq - optional, opcional - 3,5 x 38 mm, Hexagon-Lock
28.22.140 1/Pk; Paq - optional, opcional - 3,5 x 40 mm, Hexagon-Lock
28.22.145 1/Pk; Paq - optional, opcional - 3,5 x 45 mm, Hexagon-Lock
28.22.150 1/Pk; Paq - optional, opcional - 3,5 x 50 mm, Hexagon-Lock
28.22.155 1/Pk; Paq - optional, opcional - 3,5 x 55 mm, Hexagon-Lock
28.22.160 1/Pk; Paq - optional, opcional - 3,5 x 60 mm, Hexagon-Lock
28.23.035 5/Pk; Paq - optional, opcional - Unterlegscheibe, Washer, Arandela, 1.0 mm
mit Teilgewinde, partially threaded, con rosca parcial
mit Vollgewinde, fully threaded, con rosca total
INDEX
Katalog-Nr. SeiteCat. No. PageRef. Página
28.04.005 D6
28.04.006 D6
28.05.001 D8
28.05.002 D8
28.05.003 D8
28.05.004 D8
28.05.013 B4
28.05.015 B4
28.05.115 B4
28.06.106 D7
28.06.108 D7
28.06.110 D7
28.20.008 E1
28.20.010 E1
28.20.012 E1
28.20.014 E1
28.20.016 E1
28.20.018 E1
28.20.020 E1
28.20.022 E1
28.20.024 E2
28.20.026 E2
28.20.028 E2
28.20.030 E2
28.20.032 E2
28.20.035 E2
28.20.040 E2
28.20.045 E2
28.20.050 E2
28.20.108 E2
28.20.110 E2
28.20.112 E2
28.20.114 E3
28.20.116 E3
28.20.118 E3
28.20.120 E3
28.20.122 E3
28.20.124 E3
28.20.126 E3
Katalog-Nr. SeiteCat. No. PageRef. Página
28.20.128 E3
28.20.130 E3
28.20.132 E3
28.20.135 E3
28.20.140 E3
28.20.145 E3
28.20.150 E3
28.22.025 E4
28.22.028 E4
28.22.030 E4
28.22.032 E4
28.22.034 E4
28.22.036 E4
28.22.038 E4
28.22.040 E4
28.22.045 E4
28.22.050 E4
28.22.055 E4
28.22.060 E4
28.22.125 E4
28.22.128 E4
28.22.130 E4
28.22.132 E4
28.22.134 E4
28.22.136 E4
28.22.138 E4
28.22.140 E4
28.22.145 E4
28.22.150 E4
28.22.155 E4
28.22.160 E4
28.23.035 E4
28.25.008 C1
28.25.010 C1
28.25.012 C1
28.25.014 C1
28.25.016 C1
28.25.018 C1
28.25.020 C2
Katalog-Nr. SeiteCat. No. PageRef. Página
22.27.609 9
22.27.611 9
22.27.614 9
28.01.000 D2
28.01.001 D2
28.01.002 D2
28.01.003 D2
28.01.004 D2
28.01.005 D2
28.01.006 D2
28.01.010 D4
28.01.012 D4
28.01.014 D4
28.01.016 D4
28.01.018 D4
28.01.020 D5
28.01.022 D5
28.01.024 D5
28.01.030 D5
28.01.110 B3
28.01.112 B3
28.01.114 B3
28.01.116 B3
28.01.118 B3
28.01.120 B3
28.01.122 B3
28.01.124 B3
28.01.130 B3
28.01.135 B4
28.01.140 B4
28.02.000 D3
28.02.002 D3
28.02.004 D3
28.02.006 D3
28.02.008 D3
28.03.006 D6
28.03.008 D6
28.03.014 D6
28.04.004 D6
Katalog-Nr. SeiteCat. No. PageRef. Página
28.25.022 C2
28.25.024 C2
28.25.026 C2
28.25.028 C2
28.25.030 C2
28.25.108 C2
28.25.110 C2
28.25.112 C2
28.25.114 C2
28.25.116 C3
28.25.118 C3
28.25.120 C3
28.25.122 C3
28.25.124 C3
28.25.126 C3
28.25.128 C3
28.25.130 C3
28.28.011 A2
28.28.012 A2
28.28.013 A2
28.28.014 A2
28.28.015 A2
28.28.016 A3
28.28.017 A3
28.28.018 A3
28.28.019 A3
28.28.020 A3
28.28.021 A3
28.28.022 A3
28.28.024 A3
28.28.026 A3
28.28.028 A3
28.28.030 A3
28.28.110 6
28.28.120 6
28.32.000 B2
28.32.003 B2
28.32.004 B2
28.32.005 B2
INDEX
Katalog-Nr. SeiteCat. No. PageRef. Página
28.32.006 B2
28.32.007 B2
28.32.008 B2
28.60.000 6
28.60.001 6
28.60.008 A1
28.60.010 A1
28.60.110 A1
28.60.112 A1
28.60.208 A1
28.60.210 A2
28.60.310 A2
28.60.312 A2
502015136 9
502015137 9
502015204 7
502015206 8
502015207 8
502015620 9
503004124 6
503004157 7
503004169 6
503004170 6
503004197 6
503004260 7
503004262 6
503004261 7
503004267 6
503004268 7
503004270 7
503004341 8
503004342 8
503004345 8
509002104 5
509002114 5
509002150 5
509002151 5
509002190 4
509002191 4
Katalog-Nr. SeiteCat. No. PageRef. Página
509003000 4
509003100 4
509003200 5
509003300 5
515010070 A4
515012070 A4
515014070 A4
515016070 A4
515018070 A4
515020070 A4
515022070 A4
515024070 A4
515026070 A4
515028070 A4
519010050 A4
519010150 A5
519012050 A4
519012150 A5
519014050 A4
519014150 A5
519016050 A4
519016150 A5
519018150 A5
519020050 A5
519020150 A5
519022050 A5
519022150 A5
519024050 A5
519024150 A5
519026050 A5
519026150 A5
519028050 A5
519028150 A5
519030050 A5
519030150 A5
NORMED Medizin-Technik Gmbh · Ulrichstraße 7 · D-78532 Tuttlingen/GermanyTelefon: +49 / 7461 – 9343-0 · Fax: +49 / 7461 – 9343-20 E-Mail: [email protected] · www.normed-online.com
ESPANORMED S.L. · Avda. Juan Carlos I · No. 35 · E-50009 ZaragozaTel.: +34 / 976 - 30.64.00 · Fax: +34 / 976 - 30.64.02E-Mail: [email protected] · www.normed-online.com
NORMED Surgical Devices USA, LLC · 174 Kinderkamack Road · USA-07656 Parkridge, NJTel.: 001-201 / 444-7306 · Fax: 001-201 / 444-7395E-Mail: [email protected] · www.normed-online.com
0001
2 /
11.2
007
Prin
ted
in G
erm
any