IIS CA Dumps

7/26/2019 IIS CA Dumps

http://slidepdf.com/reader/full/iis-ca-dumps 1/23

1. You install the Web Server (IIS) server role on a server that runs Windows Server 2008 R2.

You configure a Web site naed contoso.co and a Web a!!lication naed "cctg on the Web

server.#he Web server runs out of dis$ s!ace.

You ove "cctg to another drive on the Web server.

#he following table shows the current a!!lication configuration%&sers re!ort that the' cannot access "cctg.

You need to enable users to access "cctg.

Which coand should 'ou run on the server

". appcmd add app /site.name: contoso /path:/Acctg /physicalPath:d:\Acctg

. appcmd add app /site.name: contoso /path:/Acctg /physicalPath:f:\Acctg

*. appcmd set app /site.name: contoso /path:/Acctg /physicalPath:d:\Acctg

+. appcmd set app /site.name: contoso /path:/Acctg /physicalPath:f:\Acctg

Answer: +

2.Your networ$ contains an S,#- server naed server1.contoso.co that runs Windows Server2008 R2.

You run telnet.ee server1.contoso.co 2/ and successfull' connect to Server1.

You restart Server1.

You run telnet.ee server1.contoso.co 2/ again and fail to connect to Server1.You need to ensure that 'ou can connect to the S,#- service on Server1.

What should 'ou odif' first

". the access control settings of the S,#- irtual Server

. the !ro!erties of the Si!le ,ail #ransfer -rotocol (S,#-) service*. the securit' settings of the S,#- irtual Server +. Windows irewall on Server1

Answer:

Section: Internet Inforation Server (IIS)

. You install the Web Server (IIS) server role on a new server that runs Windows Server 2008

R2.

You install a ,icrosoft .34# raewor$ 1.0 a!!lication on a Web site on the Web server.#he co!an' securit' !olic' states that all a!!lications ust run b' using the iniu level of

!erission.

You need to configure the Web site a!!lication so that it has the !erissions to eecute withoutcreating an' other content and without accessing an' o!erating s'ste co!onents.

What should 'ou do

". Set the .34# raewor$ trust level to ull for the Web site.

. Set the .34# raewor$ trust level to 5ow for the Web site.



*. Set the .34# raewor$ trust level to 6igh for the Web site.

+. Set the .34# raewor$ trust level to ,ediu for the Web site.

Answer: "

7. You have a Windows Server 2008 R2 server that has the Web Server (IIS) server role installed.

#he server contains a Web site.You need to ensure that the coo$ies sent fro the Web site are encr'!ted on users co!uters.

Which Web site feature should 'ou configure

". "uthori9ation Rules. ,achine :e'

*. -ages and *ontrols

+. SS5 Settings

Answer:

/. You install the Web Server (IIS) server role on a new server that runs Windows Server 2008

R2.

You install a ,icrosoft .34# raewor$ 1.0 a!!lication on a Web site on the Web server.#he co!an' securit' !olic' states that all a!!lications ust run b' using the iniu level of

!erission.You need to configure the Web site a!!lication so that it has the !erissions to eecute without

creating an'

other content and without accessing an' o!erating s'ste co!onents.

What should 'ou do". Set the .34# raewor$ trust level to ull for the Web site.


*. Set the .34# raewor$ trust level to 6igh for the Web site.+. Set the .34# raewor$ trust level to ,ediu for the Web site.

Answer: "

;. You have the Web Server (IIS) server role installed on a server that runs Windows Server 2008

R2.

You create a Web site naed contoso.co.You co!' an a!!lication naed Web*ontent to the server.

You need to enable the Web*ontent a!!lication on the Web site.

What should 'ou do

". "t the coand !ro!t on the server< run the a!!cd add site coand.. "t the coand !ro!t on the server< run the a!!cd add vdir coand.

*. Select the Web site fro the Internet Inforation Services (IIS) ,anager console. Select "dd

"!!lication.+. Select the Web site fro the Internet Inforation Services (IIS) ,anager console. Select "dd

irtual +irector'.

Answer: *

=. Your networ$ contains a Windows Server 2008 R2 server that has the Web Server (IIS) server

role installed.

You have a Web a!!lication that uses a custo a!!lication !ool.



#he a!!lication !ool is set to rec'cle ever' 1<770 inutes.

#he Web a!!lication does not su!!ort ulti!le wor$er !rocesses.

You need to configure the a!!lication !ool to ensure that users can access the Web a!!licationafter the a!!lication !ool is rec'cled.

What should 'ou do

". Set the Shutdown 4ecutable o!tion to #rue.

. Set the -rocess >r!haning 4nabled o!tion to #rue.

*. Set the +isable >verla!!ed Rec'cle o!tion to #rue.+. Set the +isable Rec'cling for *onfiguration *hanges o!tion to #rue.

Answer: *

8. You install the Web Server (IIS) server role on two servers naed Server1 and Server2.

#he servers run Windows Server 2008 R2.

Your co!an' has a Web site naed www.contoso.co hosted on Server1.#he Web site is due for aintenance. #he Web content ust be available during aintenance.

You create a irror Web site located on Server2.You need to configure the www.contoso.co site to redirect re?uests to Server2.

What should 'ou do first

". Run the appcmd set config /section:httpRedirect /enabled:true coand.

. Run the appcmd set config /section:httpRedirect /enabled:false coand.*. Run the appcmd set site /site.name:contoso /-bindings.[protocol!http!"www.contoso.com#

coand.

+. Run the appcmd set site /site.name:contoso /$bindings.

[protocol!http!"www%.contoso.com#

coand.

Answer: "

@.You install the Web Server (IIS) on a server that runs Windows Server 2008 R2.

You install a ,icrosoft .34# raewor$ a!!lication on a Web site that is hosted on the server ina folder naed Awwwroot.

#he .34# raewor$ a!!lication ust write to a log file that resides in the A-rogra

ilesAWeb"!! folder.

You need to configure the .34# raewor$ trust level setting for the Web site so that thea!!lication can write to the log file.

What should 'ou do". Set the .34# raewor$ trust level to ull for the Web site.

. Set the .34# raewor$ trust level to 6igh for the Web site.

*. Set the .34# raewor$ trust level to ,inial for the Web site.+. Set the .34# raewor$ trust level to ,ediu for the Web site.

Answer: +

10.You have a server that runs Windows Server 2008 R2.



#he server has the Web Server (IIS) server role and the #- Service role service installed.

You add a new #- site to the server.

You need to ensure that the new #- site is available.What are two !ossible wa's to achieve this goal (4ach correct answer !resents a co!lete

solution. *hoose

two.)". Run the iisreset coand on the server.

. *onfigure an alternate #*- !ort in the #- site !ro!erties.

*. *onfigure an alternate I- address in the #- site !ro!erties.+. *onfigure a host header file in the default Web site !ro!erties.

4. *onfigure an alternate I- address in the default Web site !ro!erties.

Answer: *

11. You have a Windows Server 2008 R2 server that has the Web Server (IIS) server role

installed.

#he server hosts ulti!le Web sites.

You need to configure the server to autoaticall' release eor' for a single Web site.You ust achieve this goal without affecting the other Web sites.

What should 'ou do

". *reate a new Web site and edit the bindings for the Web site.

. *reate a new a!!lication !ool and associate the Web site to the a!!lication !ool.

*. *reate a new virtual director' and odif' the -h'sical -ath *redentials on the virtualdirector'.

+. ro the "!!lication -ool +efaults< odif' the Rec'cling o!tions.

Answer:

12. You install the Web Server (IIS) server role on a new server that runs Windows Server 2008

R2.

You install a ,icrosoft .34# raewor$ a!!lication on a Web site on the Web server.#he a!!lication launches a !rocess that !resents a realBtie gra!hical re!ort to the Web browser

and creates a tet re!ort file on the hard dis$ drive.

#he co!an' securit' !olic' states that the a!!lication ust not !erfor an' of the following

tas$s%Write to the event log.

"ccess >!en +atabase *onnectivit' (>+*) data sources.

,a$e networ$ or Web service calls.You need to configure the Web site so that the a!!lication can be eecuted. You ust ensure that

the

a!!lication eets the outlined securit' re?uireents.What should 'ou do

". Set the .34# raewor$ trust level to ull for the Web site.


*. Set the .34# raewor$ trust level to 6igh for the Web site.



+. Set the .34# raewor$ trust level to ,ediu for the Web site.

Answer: +

1. You have a server that runs Windows Server 2008 R2. #he server has the Web Server (IIS)

server role installed.

#he server contains a Web site that is configured to use onl' Windows "uthentication.You have a securit' grou! naed Crou!1 that contains several user accounts.

You need to !revent the ebers of Crou!1 fro accessing a Web site.

You ust not !revent other users fro accessing the Web site.Which Web site feature should 'ou configure

". "uthentication

. "uthori9ation Rules*. IIS ,anager -erissions

+. SS5 Settings

Answer:

17. Your networ$ contains a Web server that runs Windows Server 2008 R2.

#he server has a Web site naed Site1.

You need to ensure that Web develo!ers can u!date the Web content on Site1 b' using 6##-.

What should 'ou do first". ,odif' the eature +elegation settings.

. Install the "S- Web Server (IIS) role service.

*. Install the Web+" -ublishing Web Server (IIS) role service.+. ,odif' the ,icrosoft "S-.34# !ages and control settings for the Web site.

Answer: *

1/. Your networ$ contains a Web site naed Web1.

Web1 is configured to use an a!!lication !ool naed "!!-ool1.

You need to ensure that the eor' used b' the Web site is released ever' 12 hours.#he solution ust inii9e the aount of downtie for the Web site.

What should 'ou do

". ,odif' the rec'cling settings for "!!-ool1.

. ,odif' the session state settings for Web1.*. *reate a scheduled tas$ that runs ts$ill.ee wsvc.ee.

+. *reate a scheduled tas$ that runs iisreset.ee Dnoforce.

Answer: "

1;. You !lan to strea edia content over the Internet.You need to configure -la'Read' +R, to su!!ort 6##- streaing.

What should 'ou install

". ,icrosoft IIS ,edia Services

. ,icrosoft >ffice *ounications Server



*. ,icrosoft Share-oint oundation 2010

+. Streaing ,edia Services

Answer: "

1=. Your networ$ contains a server naed Server1 that runs Windows Server 2008 R2.

Server1 has the S,#- Server feature installed and has one S,#- irtual Server naed S,#-1.You need to configure Server1 to eet the following re?uireents%

Rela' eail essages for contoso.co.

Rela' eail essages for nwtraders.co.-revent the rela'ing of eail essages to other doains.

What should 'ou do

". *onfigure two alias doains to S,#-1.

. *onfigure two reote doains to S,#-1.*. ,odif' the rela' restrictions list of S,#-1.

+. ,odif' the connection control settings of S,#-1.

Answer:

18.Your networ$ contains a Web server that runs Windows Server 2008 R2.

You create an IIS ,anager &ser account for a user naed &ser1.

When 'ou atte!t to delegate !erissions for the +efault Web Site to &ser1< 'ou receive the

following dialog bo. You need to ensure that 'ou can delegate !erissions for the +efault WebSite to &ser1.

Which feature should 'ou odif'

". eature +elegation. IIS ,anager -erissions

*. IIS ,anager &sers

+. ,anageent Service

Answer: +

1@. Your networ$ contains a Web server that runs Windows Server 2008 R2.

You need to generate a re!ort for each "ctive Server -age ("S-) that ta$es ore than two

seconds to !rocess.

What should 'ou use". Re!orts in -erforance ,onitor

. +ata *ollector Sets (+*Ss) in -erforance ,onitor

*. 5ogging in Internet Inforation Services (IIS) ,anager +. ailed Re?uest #racing Rules in Internet Inforation Services (IIS) ,anager

Answer: +

20. You install all of the Web Server (IIS) role services on a server naed Server1.



You configure the +efault Web Site to assign the IIS ,anager -erissions for the site to a user

naed &ser1.

ro a different co!uter< &ser1 atte!ts to connect to the +efault Web Site on Server1 b'using Internet Inforation Services (IIS) ,anager and receives the following error essage.

You need to ensure that &ser1 can use Internet Inforation Services (IIS) ,anager to reotel'

adinister the +efault Web Site on Server1.What should 'ou do first

". ro the Internet Inforation Services (IIS) ,anager console< configure the eature

+elegation feature.. ro the Internet Inforation Services (IIS) ,anager console< configure the ,anageent

Service feature.

*. ro the Services console< odif' the !ro!erties of the Web ,anageent Service service.

+. ro the Services console< odif' the !ro!erties of the Windows Reote ,anageent(WS,anageent) service.

Answer:

21. Your networ$ contains a Web server naed Web1 that runs Windows Server 2008 R2.

You i!ort an SS5 certificate to Web1.You need to enable SS5 encr'!tion for the Web site.

What should 'ou do

". "dd a new binding to the Web site.

. ,odif' the Server *ertificates settings.*. *onfigure the handler a!!ings for the Web site.

+. *onfigure the ,achine :e' feature for the Web site.

Answer: "

22. Your networ$ contains a Web server.You need to ensure that users can onl' access files that have the .ht< .htl< .as!< and .as! file

etensions.

What should 'ou do". "dd an authori9ation rule.

. ,odif' the handler a!!ings.

*. &!date the default docuents list.

+. *onfigure the re?uest filtering settings.

Answer: +


#he Web server has the *lient *ertificate ,a!!ing "uthentication role service installed.

You create a Web site that re?uires client certificates for authentication.You need to enable client certificate a!!ing for the Web site.

Which tool should 'ou use

". "!!cd

. *ertutil



*. the "uthori9ation ,anager sna!Bin

+. the *ertificates sna!Bin

Answer: "

27. Your networ$ contains a server naed Server1 that runs Windows Server 2008 R2.

Server1 has the Streaing ,edia Services role and the Web Server (IIS) role installed.Server1 hosts the co!an's intranet Web site.

You need to configure Windows ,edia Services to strea content b' using 6##-.

What should 'ou do first". Install the R-* over 6##- !ro' server feature.

. *onfigure a host header for the intranet Web site.

*. *onfigure the server to have an additional I- address.

+. *reate a new virtual director' on the intranet Web site.

Answer: *

2/. Your networ$ contains a server naed Server1 that runs Windows Server 2008 R2.Server1 has the Streaing ,edia Services role installed.

You discover that anon'ous users can access video content stored on Server1.You need to ensure that user access to videos on the server re?uires authentication.

What should 'ou do

". ro the Windows ,edia Services console< configure the "uthori9ation !ro!erties.

. ro the Windows ,edia Services console< configure the "uthentication !ro!erties.*. ro Internet Inforation Services (IIS) ,anager< configure the "uthentication settings.

+. ro Internet Inforation Services (IIS) ,anager< configure the .3et "uthori9ation Rules

settings.

Answer:

2;.Your networ$ contains a Web server that runs Windows Server 2008 R2.You need to bac$ u! all Web site content.


". "!!cd. Internet Inforation Services (IIS) ,anager

*. Internet Inforation Services (IIS) ;.0 ,anager

+. Wbadin

Answer: +

2=. Your networ$ contains a Web server naed Web1 that runs Windows Server 2008 R2.Web1 has a wildcard certificate installed.

Web1 has two Web sites as shown.

You discover that when 'ou go to the &R5 htt!s%DDsite1.contoso.co in Internet 4!lorer< 'ouconnect to Site2.

You need to ensure that when users go to htt!s%DDsite1.contso.co in Internet 4!lorer< the'

connect to Site1.



#he solution ust ensure that all connections to Site1 are secure. Which two settings should 'ou

odif'

(4ach correct answer !resents !art of the solution. *hoose two.)". the bindings for Site1

. the bindings for Site2

*. the 6##- Redirect settings for Site1+. the 6##- Redirect settings for Site2

Answer: "

28.Your networ$ contains a Web server that runs Windows Server 2008 R2.

#he server has two Web sites naed Site1 and Site2.

Site1 is accessed b' using the nae site1.contoso.co.

Site2 is accessed b' using the nae site2.contoso.co.You !lan to configure both Web sites to use SS5 encr'!tion.

You need to ensure that users can access Site1 b' using the &R5 htt!s%DDsite1.contoso.co and

Site2 b' using the &R5 htt!s%DDsite2.contoso.co.

What should 'ou configure for each Web site

". a different a!!lication !ool. a different host header site binding

*. a different I- address site binding

+. a different !ort site binding

Answer: *

2@. Your networ$ contains a server naed Server1 that runs Windows Server 2008 R2.

Server1 has the Streaing ,edia Services role and the Web Server (IIS) role installed.

You have a confidential edia file.You need to ensure that the edia file streas are encr'!ted.

Which !rotocol should 'ou configure

". 6##-S. I-Sec

*. ,icrosoft ,edia Server (,,S)

+. realBtie streaing !rotocol (R#S-)

Answer:

0. Your co!an' has a server that runs Windows Server 2008 R2.#he server has the Web Server (IIS) server role installed.

You need to activate SS5 for the default Web site.

Which two actions should 'ou !erfor (4ach correct answer !resents !art of the solution.*hoose two.)

". >btain and i!ort a server certificate b' using the IIS ,anager console.

. Select the Cenerate :e' o!tion in the ,achine :e' dialog bo for the default Web site.



*. "dd bindings for the 6##-S !rotocol to the default Web site b' using the IIS ,anager

console.

+. Install the +igest "uthentication co!onent for the Web server role b' using the Server,anager console.

Answer: "*

1. Your networ$ contains a server naed Server1 that runs Windows Server 2008 R2.

Server1 has the Streaing ,edia Services role and the Web Server (IIS) role installed.Server1 has a broadcast !ublishing !oint naed roadcast1.

roadcast1 !ublishes a file naed roadcast1.wv.

You run the &nicast "nnounceent Wi9ard for roadcast1 and create a new announceent file.

You need to ensure that onl' authori9ed users have !erission to access the announceent file.What should 'ou odif'

". the "uthentication settings for roadcast1

. the "uthori9ation settings for roadcast1

*. the 3#S !erissions on c%Ainet!ubAwwwrootAroadcast1.as+. the 3#S !erissions on c%Aw!ubAwrootAroadcast1.wv

Answer: *

2. Your networ$ contains a server that runs Windows Server 2008 R2.

#he server has the Web Server (IIS) role installed.#he server has a Web a!!lication that uses 6##-.

"ll authentication ethods are enabled for the Web a!!lication.

You need to !revent !asswords fro being sent over the networ$ in clear tet.Which two authentication ethods should 'ou disable (4ach correct answer !resents !art of the

solution.

*hoose two.)". "non'ous

. asic

*. +igest+. ors

4. Windows Integrated

Answer: +

. You create a anaged service account.

You need to configure a Web a!!lication !ool to use the anaged service account.What should 'ou do first

". "dd the account to the IISEI&SRS grou!.

. Run the &ew-'ebSer(icePro)y cdlet.*. Run the *nstall-A+Ser(iceAccount cdlet.

+. ,odif' the !erissions of the co!uter account.

Answer: *




Reote anageent is configured for Internet Inforation Services (IIS).

ro IIS ,anager -erissions< 'ou add a user to a Web site.You need to !revent the user fro using Internet Inforation Services (IIS) ,anager to odif'

the authori9ation rules of the Web site.

Which settings should 'ou configure". "uthori9ation Rules

. eature +elegation

*. IIS ,anager -erissions+. IIS ,anager &sers

Answer:

/. You networ$ contains an "ctive +irector' doain naed contoso.co.

#he doain contains an #- server naed Server1.

You create a doain user account naed &ser1.

You create an #- site on Server1 and configure the site to use a host nae of !ublic.contoso.co.

You need to log on to the #- site as &ser1.What should 'ou s!ecif' as the usernae

". contoso.coAuser1

. !ublic.contoso.coFuser1

*. user1+. user1Gcontoso.co

Answer:

;. Your networ$ contains an S,#- server that runs Windows Server 2008 R2.

You need to ensure that all ail for contoso.co is routed through a sart host naed

ail.contoso.co."ll other ail ust be routed b' using +3S nae resolution.

What should 'ou configure

". a new S,#- doain. the "dvanced deliver' o!tions

*. the ,essages o!tions

+. the >utbound connections o!tions

Answer: "

=. Your networ$ contains a Web server naed Server1 that runs Windows Server 2008 R2.

You odif' the configuration of Server1.You need to restore the !revious Web server configuration.

What should 'ou run

". a!!cd.ee. iisbac$.vbs

*. iiset.vbs

+. iisreset.ee

Answer: "



8. Your networ$ contains an #- server naed Server1.

Server1 has an #- site naed #-1.You need to hide all of the files in #-1 that have an .ee file etension.

#he solution ust ensure that users can list other files in #-1.

What should 'ou odif'". the #- authori9ation rules

. the #- director' browsing

*. the #- re?uest filtering+. the 3#S !erissions

Answer: *

@. Your networ$ contains a Web server that runs a Server *ore installation of Windows Server2008 R2.

You need to install the "S-.34# feature on the server.

What should 'ou run

". a!!cd.ee. dis.ee

*. sconfig.cd+. slgr.vbs

Answer:

Section: Internet Inforation Server (IIS)


&sers can connect to the +efault Web Site.

You create a new Web site and assign the site a host header.&sers cannot connect to the new Web site b' using the host header.

You need to ensure that users can connect to the new Web site b' using the host header.

What should 'ou do". *reate an "lias (*3",4) record in +3S for the host header.

. *reate a service location (SR) record in +3S for the host header.

*. ,odif' the Windows irewall configuration on the Web server.+. ,odif' the Windows irewall configuration on the users co!uters.

Answer: "

71. Your networ$ contains an #- server that runs Windows Server 2008 R2.You create an #- site on the server and allow Read access for all users.

You create an IIS ,anager user account for a user naed &ser1.

You need to ensure that &ser1 can connect to the #- site.What should 'ou do

". 4nable #- user isolation.

. 4nable asic authentication.*. "dd an #- authori9ation rule.

+. "dd a custo !rovider for #- authentication.

Answer: +



72. Your networ$ contains two Web servers that run Windows Server 2008 R2.

4ach Web server hosts three Web sites.

You need to see the nuber of active connections to each Web site in a consolidated view.Which tool should 'ou use

". Internet Inforation Services (IIS) ,anager

. -erforance ,onitor *. Resource ,onitor

+. #as$ ,anager

Answer:

7. Your networ$ contains two standalone servers naed Server1 and Server2.

Server1 has ,icrosoft SH5 Server 2008 Re!orting Services installed.Server2 has the S,#- Server feature installed.

You configure the Re!orting Services on Server1 to send re!orts b' using Server2.

You need to ensure that Server2 sends the re!orts.

What should 'ou do on Server2". *onfigure a sart host.

. *onfigure #5S encr'!tion.*. ,odif' the Rela' restrictions settings.

+. ,odif' the *onnection control settings.

Answer: *


#he Web server contains 100 a!!lication !ools.You need to identif' which a!!lication !ool is using the ost *-& resources.


". "!!cd. Internet Inforation (IIS) ,anager

*. Resource ,onitor

+. #as$ ,anager

Answer:

7/. Your networ$ contains a Web server that runs Windows Server 2008 R2.#he Web server has a Web site naed Web1.

Web1 hosts several 6#,5 Web !ages located in the *%Ainet!ubAwwwroot folder.

Windows authentication is enabled for Web1.You need to !revent soe users fro accessing one of the 6#,5 Web !ages.

What should 'ou do

". ro Windows 4!lorer< odif' the 3#S !erissions.. ro Windows 4!lorer< odif' the share !erissions.

*. ro Internet Inforation Services (IIS) ,anager< odif' the "uthentication settings.

+. ro Internet Inforation Services (IIS) ,anager< odif' the Re?uest iltering settings.

Answer: "



7;. Your networ$ contains an #- server that runs Windows Server 2008 R2.

You need to !revent #- users fro viewing all folders naed E!rivate.What should 'ou configure

". #- "uthori9ation Rules

. #- +irector' rowsing*. #- I-v7 "ddress and +oain Restrictions

+. FTP Request Filtering

Answer: +

7=. Your networ$ contains a server naed Server1 that runs Windows Server 2008 R2.

Server1 has the S,#- Server feature installed and has one S,#- irtual Server naed S,#-1.

You need to configure Server1 to eet the following re?uireents%Rela' eail essages for contoso.co.

Rela' eail essages for nwtraders.co.

-revent the rela'ing of eail essages to other doains.

What should 'ou do". *onfigure two alias doains to S,#-1.

. *onfigure two reote doains to S,#-1.*. ,odif' the rela' restrictions list of S,#-1.

+. ,odif' the connection control settings of S,#-1.

Answer:


#he server contains 10 Web sites.

You need to bac$ u! the ,icrosoft "S-.34# configuration settings of one Web site.#he solution ust inii9e the si9e of the bac$u!.

What should 'ou do

". -erfor a s'ste state bac$u!.. *o!' the Web.config file.

*. *o!' the "!!lication6ost.config file.

+. *o!' the s'stedriveAinet!ub folder.

Answer:

/0. Your networ$ contains a Web server naed Server1 that runs Windows Server 2008 R2.Server1 contains a Web site naed Web1.

&sers access Web1 b' using the &R5 htt!%DDwww.contoso.co.

You !lan to re?uest a SS5 certificate for Web1 fro a trusted certification authorit' (*").You need to create a certificate re?uest for Web1.

#he solution ust ensure that users do not receive certificate related error essages when the'

access theWeb site.

What should 'ou s!ecif' as the coon nae value in the certificate re?uest

". server1.contoso.co

. web1



*. www

+. www.contoso.co

Answer: +

/1. Your networ$ contains an #- server that runs Windows Server 2008 R2.

You need to configure SS5 securit' for the #- connections.#he solution ust eet the following re?uireents%

"ll user naes and !asswords ust be encr'!ted.

#he anon'ous user identit' ust be allowed to establish a connection without re?uiringencr'!tion.

What should 'ou configure

". the *ontrol *hannel setting to "llow

. the *ontrol *hannel setting to Re?uire onl' for credentials*. the +ata *hannel setting to "llow

+. the +ata *hannel setting to Re?uire

Answer:

/2. Your networ$ contains a Web server that runs Windows Server 2008 R2.

#he Web server contains 100 a!!lication !ools.You need to identif' which a!!lication !ool is using the ost *-& resources.


". "!!cd

. Internet Inforation (IIS) ,anager *. Resource ,onitor

+. #as$ ,anager

Answer:

/. Your networ$ contains two servers naed Server1 and Server2 that run Windows Server

2008 R2.Server1 has the Web Server (IIS) role installed.

Server2 has the ile Services role installed.

Server1 has a Web site naed Web1.Server2 has a shared folder naed Share1.

You need to give users Web access to the content in Share1.

What should 'ou do on Server1

". ,odif' the connection strings of Web1 and enable director' browsing on Web1.. ,odif' the connection strings of Web1 and configure the default docuent of Web1.

*. "dd a virtual director' to Web1 and enable director' browsing on the virtual director'.

+. "dd a virtual director' to Web1 and configure the default docuent of the virtual director'.

Answer: *

/7. Your networ$ contains a Web server.

#he Web server is configured as shown in the following table.

Site1 fails interittentl'.

You need to isolate Site1 fro the other sites.



What should 'ou do

". "ssign Site1 to a new a!!lication !ool.

. "dd a anaged handler to the 6andler ,a!!ings of Site1.*. Install and configure Windows S'ste Resource ,anager (WSR,).

+. &!grade the Site1 a!!lications to use .34# raewor$ version 2.0.

Answer: "

//.

Your networ$ contains a Web server that runs Windows Server 2008 R2.#he server has a single I- address.

You !lan to create several Web sites.

You need to ensure that each Web site is accessible over #*- !ort 80.

What should 'ou configure". the a!!lication !ools for the server

. the bindings for each site

*. the IS"-I ilters for each site

+. the Re?uest iltering settings for the server Answer:

/;. Your networ$ contains a Web server that runs Windows Server 2008 R2.

You need to log all of the configuration changes ade fro Internet Inforation Services (IIS)

,anager.

Which tool should 'ou use". "!!cd

. 4vent iewer

*. 3etsh+. -erforance ,onitor

Answer: "

/=. Your networ$ contains a Web site.

#he Web site contains a configuration file naed Site1.config.You need to !revent users fro accessing Site1.config through the Web site.

Which Internet Inforation Services (IIS) feature should 'ou configure for the site

". +irector' rowsing

. 6##- Res!onse 6eaders*. IS"-I ilters

+. Re?uest iltering

Answer: +

/8. Your networ$ contains an "ctive +irector' doain naed fabn$a.co. #he doain

contains a Web Server naed Web1 that runs Windows Server 2008 R2.

You create a new site naed Site1.

You need to ensure that when a user enters a &R5 on site1 for a resource that does not eist< a

custo web



!age dis!la's.

Which feature should 'ou configure

4nsure Success with 100 Cuarantee -ass B *ertif'Be.co.u$ ,icrosoft =0B;7 4a". +efault +ocuent

. 4rror -ages

*. 6##- Redirect+. "uthori9ation Rules

Answer:

/@. Your networ$ contains an "ctive +irector' doain naed fabri$a.co. #he doain

contains a Web server

naed Web1 that runs Windows Server 2008 R2.

You have a Web site naed *or!. #he content on *or! is stored on a "#2 !artition. *or!contains a Web

!age naed #est.htl.

You need to ensure that onl' a user naed +evi can access #est.htl fro the *or! Web site. "ll

of the other content on *or! ust be accessible to ever'one.

Which feature should 'ou configure". eature +elegation

. "uthori9ation Rules

*. I- "ddress and +oain Restrictions

+. ,anager -erissions

Answer:

;0. Your networ$ contains an "ctive +irector' doain naed fabn$a.co. #he doaincontains a Web server

naed Web1 that runs Windows Server 2008 R2.

You create a new site naed Site1.You need to !revent Web1 fro acce!ting 6##- &R5s that are longer than 1<027 b'tes.

Which feature should 'ou configure

". *onnection Strings. "uthori9ation Rules

*. Re?uest iltering

+. 6##- Res!onse 6eaders

Answer: *

;1. Your co!an' has a networ$ that has 100 servers. You install a new server that runs

Windows Server 2008 R2. #he server has the Web Server (IIS) server role installed. "fter awee$< 'ou discover that the Reliabilit' ,onitor has no data< and that the S'stes Stabilit' chart

has never been u!dated.

You need to configure the server to collect the Reliabilit' ,onitor data. What should 'ou do". Run the !erfon.ee Ds's coand on the server.

. *onfigure the #as$ Scheduler service to start autoaticall'.

*. *onfigure the Reote Registr' service to start autoaticall'.

+. *onfigure the Secondar' 5ogon service to start autoaticall'.



"nswer%

;2. Your networ$ contains a server naed Server1 that runs Windows Server 2008 R2. Server1has the Web

Server (IIS) role installed. You need to review the contents of the IISB*onfiguration

"nal'tic event log on Server1. You configure 4vent iewer to show the "nal'tic log. Whatshould 'ou do net

". ,odif' the Ceneral !ro!erties of the log.

. *reate a custo view to the log.*. "ttach a tas$ to the log.

+. ,odif' the Subscri!tions list for the log.

"nswer% "

;. You need to ca!ture the 6##- traffic to and fro a server ever' da' between 0@%00 and

10%00.

What should 'ou do

". *reate a scheduled tas$ that runs the 3etsh tool.. *reate a scheduled tas$ that runs the 3ca! tool.

*. ro 3etwor$ ,onitor< configure the Ceneral o!tions.+. ro 3etwor$ ,onitor< configure the *a!ture o!tions.

"nswer%

;7. Your networ$ contains two Web servers naed Server1 and Server2.Server1 has a Web site naed Site1. Site 1 is configured to use SS5.

You need to i!ort the SS5 certificate fro Server1 to Server2.

#he solution ust ensure that the !rivate $e' is also i!orted.Which forat should 'ou use to e!ort the certificate

". aseB;7 encoded J./0@ (.cer)

. *r'!togra!hic ,essage S'nta Standard -:*S K= (.!=b)*. +4R encoded binar' J./0@ (.cer)

+. -ersonal Inforation 4change -:*S K12 (.!f)

;/. You install the #- Service role service on a server that runs Windows Server 2008 R2.

&sers receive an error essage when the' atte!t to u!load files to the #- site.

You need to allow authenticated users to u!load files to the #- site.

What should 'ou do

". Run the ft! Ba [email protected];8.1.200 coand on the server that runs Windows Server 2008 R2.

. Run the a!!cd unloc$ config coand on the server that runs Windows Server 2008 R2.*. *onfigure Write !erissions on the #- site. *onfigure the 3#S !erissions on the #-

destination folder for the "uthenticated &sers grou! to "llow B ,odif'.

+. *onfigure Write !erissions on the #- site. *onfigure the 3#S !erissions on the #-destination folder for the "uthenticated &sers grou! to "llow B Write attributes.

"nswer% *



;;. You install the Web Server (IIS) server role on a server that runs Windows Server 2008 R2.

Your co!an's default Web site has an I- address of 10.10.0.1.

You add a Web site naed 6el!+es$.#he 6el!+es$ Web site cannot be started.

You need to configure the 6el!+es$ Web site so that it can be started.

What should 'ou do". Run the iisreset Denable coand on the server.

. *onfigure the 6el!+es$ Web site to use a host header .

*. Run the a!!cd add site Dnae% 6el!+es$ Did%2 D!h'sical-ath% c%A6el!+es$Dbinding%htt!DL%80%6el!+es$ coand on the server.

+. Run the setBlocation Bliteral!ath Md%A6el!+es$EcontentM 6el!+es$ I+%2 location !ort%80

doain%6el!+es$ coand in the ,icrosoft Windows -owerShell tool on the server.

"nswer%

;=.Your co!an' naed *ontoso< 5td. runs Windows Server 2008 R2. You anage a Webserver naed web.

contoso.co.#he Web server hosts two Web sites naed www.contoso.co and webail.contoso.co.

&sers connect to both the sites fro the Internet b' using 6##-. #he new co!an' securit'

!olic' has the

following re?uireents%#he webail.contoso.co site ust be available for Internet users onl' through Secure 6##-

(6##-S).

#wo folders naed >rder and 6istor' on www.contoso.co ust be available onl' through6##-S.

"ll users ust be able to connect to both sites without receiving an' securit' warnings.

You need to add SS5 certificates on web.contoso.co. You ust eet the co!an' securit' !olic'

re?uireents.

What should 'ou do first". Cenerate a selfBsigned certificate for web.contoso.co.

. Cenerate se!arate doain certificates for www.contoso.co and webail.contoso.co.

*. Re?uest one certificate fro the !ublic trusted certification authorit' for web.contoso.co.

+. Re?uest se!arate certificates fro the !ublic trusted certification authorit' forwww.contoso.co and

webail.contoso.co.

"nswer% +

;8. You anage a server that runs Windows Server 2008 R2.

#he server has the Web Server (IIS) server role installed.#he Web develo!er at 'our co!an' creates a new Web site that runs an "S-.34# .0 Web

a!!lication.

#he "S-.34# Web a!!lication ust run under a securit' contet that is se!arate fro an' other

"S-.34#



a!!lication on the Web server.

You create a local user account and grant account rights and !erissions to run the "S-.34#

Weba!!lication.

You need to configure authentication for the new Web site to su!!ort the Web a!!lication.

What should 'ou do". *onfigure the Windows "uthentication setting to 4nabled.

. *onfigure the ors "uthentication setting to 4nabled b' using all the default settings.

*. *onfigure the "S-.34# State Service to log on to the new local user account b' using theServices console.

+. *onfigure the "S-.34# I!ersonation setting to 4nabled. 4dit the "S-.34# I!ersonation

setting b' s!ecif'ing the new local user account.

"nswer% +

;@. You have a server naed Server1 that runs Windows Server 2008 R2. #he server has the Web

Server (IIS)

server role installed.You have an S,#- gatewa' that connects to the Internet.

#he internal firewall !revents all co!uters< ece!t the S,#- gatewa'< fro establishingconnections over

#*- !ort 2/.

You configure the S,#- gatewa' to rela' eBail for Server1.

You need to configure a Web site on Server1 to send eBail to Internet users.What should 'ou do

". >n Server1< install the S,#- Server feature.

. >n Server1< configure the S,#- 4Bail feature for the Web site.*. >n an internal +3S server< create an ,J record for Server1.

+. >n an internal +3S server< create an ,J record for the S,#- gatewa'.

"nswer%

=0. You have 10 servers that run Windows Server 2008 R2. #he servers have the Web Server

(IIS) server roleinstalled.

#he servers are ebers of a Web server far. #he servers host the sae Web site.

You need to configure the servers to eet the following re?uireents%

"llow changes to the Web server configurations that are ade on one server to be ade on allservers in

the far.

,inii9e adinistrative effort to !erfor the configuration changes.What should 'ou do

". >n all servers< configure the Shared *onfiguration settings.

. >n one server< configure the Shared *onfiguration setting.*. >n one server< create a scheduled tas$ that co!ies the Inte!ub folder to the other servers.

+. *reate a +S 3aes!ace. >n each server configure the Inet!ub folder as the target of the

+S 3aes!ace.

"nswer% "



=1. Your co!an' naed *ontoso< 5td. runs Windows Server 2008 R2.

You anage a Web server naed Server1.Internet users access Server1 b' using htt!%DDwww.contoso.co and htt!s%DDwww.contoso.co.

#he Server1 server uses an SS5 certificate fro a !ublic certification authorit' (*").

You install an additional Web server naed Server2.You configure a 3etwor$ 5oad alancing cluster to distribute the incoing 6##- and 6##-S

traffic between

both Web servers.You need to configure an SS5 certificate on Server2 to su!!ort 6##-S connections.

You ust ensure that all users can connect to htt!s%DDwww.contoso.co without receiving

securit' warnings.

What should 'ou do". >!en the Internet Inforation Services (IIS) ,anager console on Server2. *reate a selfB

signed certificate.

. >!en the Internet Inforation Services (IIS) ,anager console on Server1. 4!ort the SS5

certificate to a . !f file. I!ort the .!f file to Server2.*. >!en the *ertificates sna!Bin on Server1. 4!ort the SS5 certificate to a .cer file. I!ort

the .cer file to Server2.+. Re?uest a new SS5 certificate fro the !ublic *". &se Server2 as the *oon 3ae in the

re?uest.Install the new certificate on Server2.

"nswer%

=2. You anage a eber server that runs Windows Server 2008 R2.

#he eber server has the Web Server (IIS) server role installed.

#he server hosts a Web site that is onl' accessible to the eecutives of 'our co!an'.#he co!an' !olic' states that the eecutives ust access the confidential Web content b' using

user certificates.

You need to ensure that the eecutives can onl' access the secure Web site b' using theirinstalled certificates.

What should 'ou do

". *onfigure the SS5 settings to Re?uire 128Bbit SS5 on the confidential Web site.. *onfigure the *lient *ertificates settings to "cce!t on the SS5 settings for the confidential

Web site.

*. *onfigure the *lient *ertificates settings to re?uire on the SS5 settings for the confidential

Web site.+. *onfigure a *ertificate #rust list to include the eecutives certification authorit' (*")

certificate.

"nswer% *

=. You i!leent a eber server that runs Windows Server 2008 R2.#he eber server has the Web Server (IIS) server role installed.

#he eber server also hosts intranet Web sites.

Your co!an' !olic' has the following re?uireents%

&se encr'!tion for all authentication traffic to the intranet Web site.



"uthenticate users b' using their "ctive +irector' credentials.

"void the use of SS5 on the Web server for !erforance reasons.

You need to configure all the Web sites on the server to eet the co!an' !olic'.Which three actions should 'ou !erfor (4ach correct answer !resents !art of the solution.

*hoose three.)

". *onfigure the asic "uthentication setting on the server to 4nabled.. *onfigure the +igest "uthentication setting on the server to 4nabled.

*. *onfigure the Windows "uthentication setting on the server to 4nabled.

+. *onfigure the "non'ous "uthentication setting on the server to +isabled.4. *onfigure the "ctive +irector' *lient *ertificate "uthentication setting on the server to

4nabled.

"nswer% *+

=7. Your co!an' hosts a Web site on a server that runs Windows Server 2008 R2.

#he server has the Web Server (IIS) server role installed.

SS5 is configured on the Web site for virtual directories that re?uire encr'!tion.

You are i!leenting a new Web a!!lication on the Web site.#he new a!!lication has its own logon !age naed userlogin.as!.

You enable ors "uthentication in the Web site !ro!erties.You need to configure the Web site to use userlogin.as! to authenticate user accounts.

What should 'ou do

". *onfigure the ors "uthentication Settings to Re?uire SS5.

. *onfigure the 3ae !ro!ert' of the *oo$ie Settings to the userlogin.as! filenae.*. *onfigure the 5ogin &R5 !ro!ert' for the ors "uthentication Settings to the

userlogin.as! filenae.

+. *onfigure the +efault +ocuent setting to add the userlogin.as! filenae in the Web site !ro!erties.

"nswer% *

IIS CA Dumps

Documents

Transcript of IIS CA Dumps