GSM · GSM 2000 safety fences welded frame construction offers great stability steel mesh fence...
Transcript of GSM · GSM 2000 safety fences welded frame construction offers great stability steel mesh fence...
Machine Guarding/Safety Systems from GSMGSM 2000 - The perfect allround solution for every application
GSM 2000
GSMGuarding Safety Motion
GSM 2000The perfect allround solution: variable, flexible and solid design
GSM 2000 – The allround solution for your machine guarding needs offers numerous applica-
tion options because of it‘s simple and solid design. Flexibility at it’s best: With 7 different stand-
ard heights and 14 different standard widths the GSM 2000 is adaptable to almost any user re-
quirements.
Not only is the GSM 2000 a machine guarding system. It can also be used as a safety
perimeter fence for storage areas or other areas where safety is important. The solid but
reasonably priced safety system is designed with the high level of quality in mind that
GSM is known for.
Advantages at a glance:
� the GSM 2000 arrives pre-assembled at your installation site
� simple installation (no tools needed)
� innovative, patented hanging mechanism
� optional tiltable bracket allows for adjust-ability from -90 to +90 degrees
� easy and simple mounting of cable channels
� high stability is a given; also on uneven surfaces
GSM 2000 safety fences
� welded frame construction offers great stability
� steel mesh fence completely welded to the steel fra-me
� reinforcement of the steel frame with additional hori-zontal steel bars
� slot opening < 20 mm
� special filling material instead of wire mesh fence available on request
� optional mounting of cable channels possible
GSM 2000 posts
� solid design with 50 x 50 steel tube profile
� guarding system available in heights from 1,400 mm to 2,700 mm in 200 mm increments
� solid footing because of extra large base plate (150 x 50 mm)
� post can be bolted to the floor with M10 or M12 dowels
� continuous welded seam between base plate and steel tube profile
� quick installation because of pre-assembled post
� solid execution with 50 x 50 mm steel tube profile and portal design
� doors available in heights of 1,400 to 2,700 mm
� solid footing because of extra large base plate
� door handles and locks available in a large variety
� integrated electrical access device available as an option
� quick installation because of pre-assembled compo-nents
GSM 2000 hinged doors GSM 2000 sliding doors
� sliding doors for transport of material
� pneumatically driven and electrically connected (incl. register, reset, E-stop etc.)
� quick assembly because of pre-assembled compo-nents
� guide rails equipped with ball bearing equipped carriages
� easy alignment due to pre-assembled set screws and solid base plate
� the interface to the machine switch cabinet is equip-ped with a cable and a standard plug
GSMGesellschaft für Systemtechnik und Maschinen mbHRaiffeisenstrasse 28D-33175 Bad Lippspringe
Fon: +49 (0) 5252 - 9759-0Fax: +49 (0) 5252 - 9759-29
or
GSM GmbHZeppelinweg 2D-99734 Nordhausen Fon: +49 (0) 3631 - 65128-0 Fax: +49 (0) 3631 - 65128-109
E-mail: [email protected]: www.gsmotion.de
GSM - The most solid and easy to install safety fences.
GSMGuarding Safety Motion