GARANZIA: WARRANTY - stagon.it · GARANZIA: Gli articoli STAGON sono coperti dalla garanzia per un...
Transcript of GARANZIA: WARRANTY - stagon.it · GARANZIA: Gli articoli STAGON sono coperti dalla garanzia per un...
GARANZIA:
Gli articoli STAGON sono coperti dalla garanzia per un periodo di 24 mesi dalla data di acquisto, norme Europee vigenti, tenendo presente che venga installato ed utilizzato secondo le indicazioni del produttore.
La garanzia decade nel caso sia evidente il montaggio difettoso od eseguito senza tenere conto delle raccoman-dazioni di installazione oppure che la manutenzione e pulizia sia eseguito con solventi chimici o benzine.
WARRANTY
Stagon items are under warranty for a period of 24 months from the purchase date, applying to the E.C. current standards rules, on condition that all the manufacturer’ installation and use instructions have been followed by the users.
The warranty decays in case of defective assemblying, in case it is executed without following the requested installation procedures or if the maintenance and cleaning have been effected with solvents or petrols.
Associazione Aqua Italia
43100 PARMA - Italy - Via Paradigna 116 - Tel. 0521.606114 - Fax 0521.606115
www.stagon.it www.kalki-srl.it
[email protected] [email protected]
INDICE:ST
SN
AB
AG
HH
HN
PR
LC
OS-OSV
OC-OCV
BP-SB
SP-SPA
PM
WR-SS
EC-CE-CC
EA-EP
CT
UV1
SW
4
5
6
7
8
9
10
11
12
13
14
16
17
18
19
20
21
21
22
Stagon ST housings bodies are manufactured of CLEAR FDA (SAN) Styrene-Acrilonitrile. Caps are molded with BRASS inserted inlet/outlet.I filtri Stagon modello ST hanno il Vaso TRASPARENTE in Styrene-Acrilonitrile (SAN) grado FDA. Le testate sono con inserti in OTTONE.
Stagon SN housings bodies are manufactured of CLEAR FDA (SAM) Styrene-Acrilonitrile. Caps are molded with PLASTIC inlet/outlet.
I filtri Stagon modello SN hanno il Vaso TRASPARENTE in Styrene-Acrilonitrile (SAN) grado FDA. Le testate hanno attacchi in PLASTICA.
Stagon AB housings OPAQUE bodies. Caps are molded with BRASS inserted inlet/outlet..
I filtri Stagon modello AB hanno il Vaso OPACO. Le testate sono con inserti in OTTONE.
Stagon AG housings OPAQUE bodies. The 1/2”, 3/4” or 1” ports are in PLASTIC, blue or black color heads are available
I filtri Stagon modello AG hanno il Vaso OPACO. Le testate sono in blu, gli attacchi sono il PLASTICA di 1/2”, 3/4” o 1”
Stagon opaque HH housings had been studied for High Pressure & High Temperature use. Caps are molded with BRASS inserted inlet/outlet.
I filtri Stagon modello HH colore opaco è stato studiato per uso ad alta pressione e ad acqua calda. Le testate sono con inserti in OTTONE.
Stagon opaque HN housings had been studied for High Pressure & High Temperature use. Inlet/outlet ports are in PLASTIC.
I filtri Stagon modello HN colore opaco è stato studiato per uso ad alta pressione e ad acqua calda. Le testate sono con attacchi in PLASTICA.
Stagon PR housings bodies are manufactured of CLEAR FDA grade Polycarbonate. Caps are molded with BRASS inserted inlet/outlet.
I filtri Stagon modello PR hanno il Vaso TRASPARENTE in Policarbonato grado FDA. Le testate sono con inserti in OTTONE.
Large Capacity Housings “LC”
Contenitori per Grosso Flusso “LC”
Stagon OS housings are all in white color, caps are available with 1/4” or 3/8” for domestic RO units. OSV housings wiht 1/8” hole on the outlet side of the caps.I filtri Stagon modello OS sono di colore bianco con attacchi da 1/4” o 3/8” per osmosi domestico. Il modello OSV ha un foro da 1/8” in uscita.Stagon OC housings bodies are clear, caps are available with 1/4” or 3/8” for domestic RO units. OSV housings wiht 1/8” hole on the outlet side of the caps.I filtri Stagon modello OS sono di colore trasparente con attacchi da 1/4” o 3/8” per osmosi domestico. Il modello OSV ha un foro da 1/8” in uscita.
Filter housings nikel plated brass head - SAN or AISI 304 SUMP.
Contenitori filtri testa in ottone nikelato - vaso in SAN o AISI 304
Wound poypropylene Cartridge
Cartuccia filo avvolto in polipropilene
Meltblown polypropylene cartridge
Cartuccia polipropilene estruso
Washable net cartridge / Cartuccia Rete lavabile
Stainless steel Mesh / Rete in Acciaio inox
Empty canister / Cartuccia contenitore vuoto
CE: Ceramic cartridges / CE: Cartuccia in Ceramica
Granular Activated Carabon / Carbone Attivato Granulare
Phosphate Cartridges / Cartuccia Sali polifosfati
Water Treatment / “Counter Top”
Trattamento acqua / “Counter Top”
Ultraviolet Disinfection, UVC
Disinfezione con raggi Ultravioletti, UVC
Water Treatment / “Spring Water”
Trattamento acqua / “Spring Water”
pag.
Stagon ST housings bodies are manufactured of CLEAR FDA (SAN)Styrene-Acrilonitrile. Caps are molded with BRASS inserted inlet/outlet.I filtri Stagon modello ST hanno il Vaso TRASPARENTE in Styrene-Acrilonitrile(SAN) grado FDA. Le testate sono con inserti in OTTONE.
Working PressurePressione di esercizio
Maximum PressurePressione massima
Max. TemperatureTemperatura max.
Chemical compatibilityComp. ai prod. chimici
145 PSI 10 BAR 508 PSI 40 BAR 122° F 50° C Discrete Discrete
Head MaterialMateriale Testata
FDA grade reinforcedPolypropylene
Sump MaterialMateriale Vaso
FDA grade SANStyrene Acrylonitile
Air Relief ValveValvola di Sfiato
BrassOttone
O-ringOR
NBR 70SHA
Code Codice
ModelModello
HightAltezza
Sump colorColore vaso
Inlet/outletEntrata/Uscita
Head colorColore testa
VolumeImballo
QTYScatola
21.5501.02 21.5601.0221.5701.0221.5801.0221.5901.0221.5503.0221.5603.0221.5703.0221.5803.0221.5903.0221.7501.0221.7601.0221.7701.0221.7801.0221.7901.0221.7503.0221.7603.0221.7703.0221.7803.0221.7903.0221.9501.0221.9601.0221.9701.0221.9801.0221.9901.0221.9503.0221.9603.0221.9703.0221.9803.0221.9903.0221.2501.0221.2601.0221.2701.02
STSTSTSTSTSTSTSTSTSTSTSTSTSTSTSTSTSTSTSTSTSTSTSTSTSTSTSTSTSTSTSTST
5”5”5”5”5”5”5”5”5”5”7”7”7”7”7”7”7”7”7”7”
9-3/4”9-3/4”9-3/4”9-3/4”9-3/4”9-3/4”9-3/4”9-3/4”9-3/4”9-3/4”
20”20”20”
Clear Trasp.Clear Trasp.Clear Trasp.Clear Trasp.Clear Trasp.Clear Trasp.Clear Trasp.Clear Trasp.Clear Trasp.Clear Trasp.Clear Trasp.Clear Trasp.Clear Trasp.Clear Trasp.Clear Trasp.Clear Trasp.Clear Trasp.Clear Trasp.Clear Trasp.Clear Trasp.Clear Trasp.Clear Trasp.Clear Trasp.Clear Trasp.Clear Trasp.Clear Trasp.Clear Trasp.Clear Trasp.Clear Trasp.Clear Trasp.Clear Trasp.Clear Trasp.Clear Trasp.
1/2” GAS3/4” GAS1” GAS
1-1/4” GAS1-1/2” GAS1/2” NPT3/4” NPT1” NPT
1-1/4” NPT1-1/2” NPT1/2” GAS3/4” GAS1” GAS
1-1/4” GAS1-1/2” GAS1/2” NPT3/4” NPT1” NPT
1-1/4” NPT1-1/2” NPT1/2” GAS3/4” GAS1” GAS
1-1/4” GAS1-1/2” GAS1/2” NPT3/4” NPT1” NPT
1-1/4” NPT1-1/2” NPT1/2” GAS3/4” GAS1” GAS
BlueBlueBlueBlueBlueBlueBlueBlueBlueBlueBlueBlueBlueBlueBlueBlueBlueBlueBlueBlueBlueBlueBlueBlueBlueBlueBlueBlueBlueBlueBlueBlueBlue
16161616161616161616161616161616161616121212121212121212 1212111
0,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,01140,01140,01140,0114
4
Code Codice
ModelModello
HightAltezza
Sump colorColore vaso
Inlet/outletEntrata/Uscita
Head colorColore testa
VolumeImballo
QTYScatola
21.2801.0221.2901.0221.2503.0221.2603.0221.2703.0221.2803.0221.2903.02
STSTSTSTSTSTST
20”20”20”20”20”20”20”
Clear Trasp.Clear Trasp.Clear Trasp.Clear Trasp.Clear Trasp.Clear Trasp.Clear Trasp.
1-1/4” GAS1-1/2” GAS1/2” NPT3/4” NPT1” NPT
1-1/4” NPT1-1/2” NPT
BlueBlueBlueBlueBlueBlueBlue
1 1 1 1 1 1 1
Code Codice
ModelModello
HightAltezza
Sump colorColore vaso
Inlet/outletEntrata/Uscita
Head colorColore testa
VolumeImballo
QTYScatola
Stagon SN housings bodies are manufactured of CLEAR FDA (SAM)Styrene-Acrilonitrile. Caps are molded with PLASTIC inlet/outlet.I filtri Stagon modello SN hanno il Vaso TRASPARENTE in Styrene-Acrilonitrile(SAN) grado FDA. Le testate hanno attacchi in PLASTICA.
Working PressurePressione di esercizio
Maximum PressurePressione massima
Max. TemperatureTemperatura max.
Chemical compatibilityComp. ai prod. chimici
145 PSI 10 BAR PSI 40 BAR 122° F 50° C Discrete Discrete
Head MaterialMateriale Testata
FDA grade reinforcedPolypropylene
Sump MaterialMateriale Vaso
Air Relief ValveValvola di Sfiato
Polyamide
O-ringOR
NBR 70SHAFDA grade SAN
Styrene Acrylonitile
21.5500.02 21.5600.02 21.5700.02 21.5502.02 21.5600.0221.5700.0221.7500.0221.7600.0221.7700.0221.7502.0221.7602.0221.7702.0221.9500.0221.9600.0221.9700.0221.9502.0221.9602.0221.9702.0221.2500.0221.2600.0221.2700.0221.2502.0221.2602.0221.2702.02
SNSNSNSNSNSNSNSNSNSNSNSNSNSNSNSNSNSNSNSNSNSNSNSN
5”5”5”5”5”5”7”7”7”7”7”7”
9-3/4”9-3/4”9-3/4”9-3/4”9-3/4”9-3/4”
20”20”20”20”20”20”
Clear Trasp.Clear Trasp.Clear Trasp.Clear Trasp.Clear Trasp.Clear Trasp.Clear Trasp.Clear Trasp.Clear Trasp.Clear Trasp.Clear Trasp.Clear Trasp.Clear Trasp.Clear Trasp.Clear Trasp.Clear Trasp.Clear Trasp.Clear Trasp.Clear Trasp.Clear Trasp.Clear Trasp.Clear Trasp.Clear Trasp.Clear Trasp.
1/2” GAS3/4” GAS1” GAS
1/2” NPT3/4” NPT1” NPT
1/2” GAS3/4” GAS1” GAS
1/2” NPT3/4” NPT1” NPT
1/2” GAS3/4” GAS1” GAS
1/2” NPT3/4” NPT1” NPT
1/2” GAS3/4” GAS1” GAS
1/2” NPT3/4” NPT1” NPT
Blue Blue Blue Blue Blue Blue Blue BlueBlue Blue Blue BlueBlue Blue Blue BlueBlue Blue Blue BlueBlue Blue Blue Blue
1616161616161616161616161212121212121 1 1 1 1 1
0,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,01140,01140,01140,01140,01140,0114
0,01140,01140,01140,01140,01140,01140,0114
5
Stagon AB housings OPAQUE bodies .Caps are molded with BRASS inserted inlet/outlet..I filtri Stagon modello AB hanno il Vaso OPACO.Le testate sono con inserti in OTTONE.
Working PressurePressione di esercizio
Maximum PressurePressione massima
Max. TemperatureTemperatura max.
Chemical compatibilityComp. ai prod. chimici
PSI 12 BAR PSI 45 BAR 122° F 50° C Scarce Scarsa
Head MaterialMateriale Testata
grade PolyamidePoliamide grado
Sump MaterialMateriale Vaso
FDA grade PolypropylenePolypropylene grado FDA
Air Relief ValveValvola di Sfiato
BrassOttone
O-ringOR
NBR 70SHA
Code Codice
ModelModello
HightAltezza
Sump colorColore vaso
Inlet/outletEntrata/Uscita
Head colorColore testa
VolumeImballo
QTYScatola
25.5501.12 25.5601.1225.5701.1225.5801.1225.5901.1225.5503.1225.5603.1225.5703.1225.5803.1225.5903.1225.7501.1225.7601.1225.7701.1225.7801.1225.7901.1225.7503.1225.7603.1225.7703.1225.7803.1225.7903.1225.9501.1225.9601.1225.9701.1225.9801.1225.9901.1225.9503.1225.9603.1225.9703.1225.9803.1225.9903.1225.2501.1225.2601.1225.2701.1225.2801.1225.2901.12
ABABABABABABABABABABABABABABABABABABABABABABABABABABABABABABABABABABAB
5”5”5”5”5”5”5”5”5”5”7”7”7”7”7”7”7”7”7”7”
9-3/4”9-3/4”9-3/4”9-3/4”9-3/4”9-3/4”9-3/4”9-3/4”9-3/4”9-3/4”
20”20”20”20”20”
1/2” GAS3/4” GAS1” GAS
1-1/4” GAS1-1/2” GAS1/2” NPT3/4” NPT1” NPT
1-1/4” NPT1-1/2” NPT1/2” GAS3/4” GAS1” GAS
1-1/4” GAS1-1/2” GAS1/2” NPT3/4” NPT1” NPT
1-1/4” NPT1-1/2” NPT1/2” GAS3/4” GAS1” GAS
1-1/4” GAS1-1/2” NPT1/2” NPT3/4” NPT1” NPT
1-1/4” NPT1-1/2” NPT1/2” GAS3/4” GAS1” GAS
1-1/4” GAS1-1/2” GAS
White BiancoWhite BiancoWhite BiancoWhite BiancoWhite BiancoWhite BiancoWhite BiancoWhite BiancoWhite BiancoWhite BiancoWhite BiancoWhite BiancoWhite BiancoWhite BiancoWhite BiancoWhite BiancoWhite BiancoWhite BiancoWhite BiancoWhite BiancoWhite BiancoWhite BiancoWhite BiancoWhite BiancoWhite BiancoWhite BiancoWhite BiancoWhite BiancoWhite BiancoWhite BiancoWhite BiancoWhite BiancoWhite BiancoWhite BiancoWhite Bianco
BlueBlueBlueBlueBlueBlueBlueBlueBlueBlueBlueBlueBlueBlueBlueBlueBlueBlueBlueBlueBlueBlueBlueBlueBlueBlueBlueBlue Blue BlueBlueBlueBlueBlueBlue
1616161616161616161616161616161616161616121212121212121212121 1 1 1 1
0,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,01140,01140,01140,01140,0114
6
I filtri Stagon modello AB hanno il Vaso OPACO.Le testate sono con inserti in OTTONE.
Stagon AG housings OPAQUE bodies. The 1/2”,3/4” or 1” ports are in PLASTIC, blue or black color heads are availableI filtri Stagon modello AG hanno il Vaso OPACO.Le testate sono in blu, gli attacchi sono il PLASTICA di 1/2”, 3/4” o 1”
Working PressurePressione di esercizio
Maximum PressurePressione massima
Max. TemperatureTemperatura max.
Chemical compatibilityComp. ai prod. chimici
PSI 12 BAR PSI 45 BAR 122° F 50° C Good Buona
Head MaterialMateriale Testata
grade PolyamidePoliamide grado
Sump MaterialMateriale Vaso
Air Relief ValveValvola di Sfiato
Polyamide
O-ringOR
NBR 70SHAFDA grade PolypropylenePolipropilene grado FDA
Code Codice
ModelModello
HightAltezza
Sump colorColore vaso
Inlet/outletEntrata/Uscita
Head colorColore testa
VolumeImballo
QTYScatola
Blue Blue Blue Blue Blue Blue Blue Blue Blue Blue Blue Blue Blue Blue Blue Blue Blue Blue Blue Blue Blue Blue Blue Blue
25.5500.1225.5600.1225.5700.1225.5502.1225.5602.1225.5702.1225.7500.1225.7600.1225.7700.1225.7502.1225.7602.1225.7702.1225.9500.1225.9600.1225.9700.1225.9502.1225.9602.1225.9702.1225.2500.1225.2600.1225.2700.1225.2502.1225.2602.1225.2702.12
AGAGAGAGAGAGAGAGAGAGAGAGAGAGAGAGAGAGAGAGAGAGAGAG
White BiancoWhite BiancoWhite BiancoWhite BiancoWhite BiancoWhite BiancoWhite BiancoWhite BiancoWhite BiancoWhite BiancoWhite BiancoWhite BiancoWhite BiancoWhite BiancoWhite BiancoWhite BiancoWhite BiancoWhite BiancoWhite BiancoWhite BiancoWhite BiancoWhite BiancoWhite BiancoWhite Bianco
5”5”5”5”5”5”7”7”7”7”7”7”
9-3/4”9-3/4”9-3/4”9-3/4”9-3/4”9-3/4”
20”20”20”20”20”20”
1/2”GAS3/4”GAS1”GAS
1/2”NPT3/4”NPT1”NPT
1/2”GAS3/4”GAS1”GAS
1/2”NPT3/4”NPT1”NPT
1/2”GAS3/4”GAS1”GAS
1/2”NPT3/4”NPT1”NPT
1/2”GAS3/4”GAS1”GAS
1/2”NPT3/4”NPT1”NPT
1616161616161616161616161212121212121 1 1 1 1 1
Code Codice
ModelModello
HightAltezza
Sump colorColore vaso
Inlet/outletEntrata/Uscita
Head colorColore testa
VolumeImballo
QTYScatola
Blue Blue Blue Blue Blue
25.2503.1225.2603.1225.2703.1225.2803.1225.2903.12
ABABABABAB
White BiancoWhite BiancoWhite BiancoWhite BiancoWhite Bianco
20”20”20”20”20”
1/2”NPT3/4”NPT1”NPT
1-1/4”NPT1-1/2”NPT
1 1 1 1 1
0,01140,01140,01140,01140,0114
0,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,01140,01140,01140,01140,01140,0114
7
Stagon opaque HH housings had been studied for High Pressure & HighTemperature use. Caps are molded with BRASS inserted inlet/outlet.I filtri Stagon modello HH colore opaco è stato studiato per uso ad alta pressionee ad acqua calda. Le testate sono con inserti in OTTONE.
Working PressurePressione di esercizio
Maximum PressurePressione massima
Max. TemperatureTemperatura max.
Chemical compatibilityComp. ai prod. chimici
218 PSI 15 BAR 725 PSI 50 BAR 176° F 80° C Good Buona
Head MaterialMateriale Testata
Glass reinforced PolyamidePoliamide rinforzato
Sump MaterialMateriale Vaso
Air Relief ValveValvola di Sfiato
BrassOttone
O-ringOR
VITON
Code Codice
ModelModello
HightAltezza
Sump colorColore vaso
Inlet/outletEntrata/Uscita
Head colorColore testa
VolumeImballo
QTYScatola
Orange ArancioOrange ArancioOrange ArancioOrange ArancioOrange ArancioOrange ArancioOrange ArancioOrange ArancioOrange ArancioOrange ArancioOrange ArancioOrange ArancioOrange ArancioOrange ArancioOrange ArancioOrange ArancioOrange ArancioOrange ArancioOrange ArancioOrange ArancioOrange ArancioOrange ArancioOrange ArancioOrange ArancioOrange ArancioOrange ArancioOrange ArancioOrange ArancioOrange ArancioOrange ArancioOrange ArancioOrange ArancioOrange ArancioOrange ArancioOrange Arancio
26.5501.55 26.5601.5526.5701.5526.5801.5526.5901.5526.5503.5526.5603.5526.5703.5526.5803.5526.5903.5526.7501.5526.7601.5526.7701.5526.7801.5526.7901.5526.7503.5526.7603.5526.7703.5526.7803.5526.7903.5526.9501.5526.9601.5526.9701.5526.9801.5526.9901.5526.9503.5526.9603.5526.9703.5526.9803.5526.9903.5526.2501.5526.2601.5526.2701.5526.2801.5526.2901.55
HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH HHHHHHHH HHHHHHHH HHHHHHHH HHHHHHHH HHHH
Orange ArancioOrange ArancioOrange ArancioOrange ArancioOrange ArancioOrange ArancioOrange ArancioOrange ArancioOrange ArancioOrange ArancioOrange ArancioOrange ArancioOrange ArancioOrange ArancioOrange ArancioOrange ArancioOrange ArancioOrange ArancioOrange ArancioOrange ArancioOrange ArancioOrange ArancioOrange ArancioOrange ArancioOrange ArancioOrange ArancioOrange ArancioOrange ArancioOrange ArancioOrange ArancioOrange ArancioOrange ArancioOrange ArancioOrange ArancioOrange Arancio
5”5”5”5”5”5”5”5”5”5”7”7”7”7”7”7”7”7”7”7”
9-3/4”9-3/4”9-3/4”9-3/4”9-3/4”9-3/4”9-3/4”9-3/4”9-3/4”9-3/4”9-3/4”
20”20”20”20”
1/2” GAS3/4” GAS1” GAS
1-1/4” GAS1-1/2” GAS1/2” NPT3/4” NPT1” NPT
1-1/4” NPT1-1/2” NPT1/2” GAS3/4” GAS1” GAS
1-1/4” GAS1-1/2” GAS1/2” NPT3/4” NPT1” NPT
1-1/4” NPT1-1/2” NPT1/2” GAS3/4” GAS1” GAS
1-1/4” GAS1-1/2” GAS1/2” NPT3/4” NPT1” NPT
1-1/4” NPT1-1/2” NPT1/2” GAS3/4” GAS1” GAS
1-1/4” GAS1-1/2” GAS
161616161616161616161616161616161616161612121212121212121212121 1 1 1
0,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,0677 0,01140,01140,01140,0114
8
Stagon opaque HN housings had been studied for High Pressure & HighTemperature use. Inlet/outlet ports are in PLASTIC.I filtri Stagon modello HN colore opaco è stato studiato per uso ad alta pressionee ad acqua calda. Le testate sono con attacchi in PLASTICA.
Working PressurePressione di esercizio
Maximum PressurePressione massima
Max. TemperatureTemperatura max.
Chemical compatibilityComp. ai prod. chimici
218 PSI 15 BAR 725 PSI 50 BAR 176° F 80° C Good Buona
Head MaterialMateriale Testata
Glass reinforced PolyamidePoliamide rinforzato
Sump MaterialMateriale Vaso
Air Relief ValveValvola di Sfiato
PolyamidePoliamide
O-ringOR
VITON
Code Codice
ModelModello
HightAltezza
Sump colorColore vaso
Inlet/outletEntrata/Uscita
Head colorColore testa
VolumeImballo
QTYScatola
26.5500.0226.5600.02 26.5700.02 26.5502.02 26.5602.02 26.5702.02 26.7500.02 26.7600.02 26.7700.02 26.7502.02 26.7602.02 26.7702.02 26.9500.02 26.9600.02 26.9700.02 26.9502.02 26.9602.02 26.9702.02 26.2500.02 26.2600.02 26.2700.02 26.2502.02 26.2602.0226.2702.02
HNHN HNHN HNHNHNHNHNHNHNHNHNHNHNHNHNHNHNHNHNHNHNHN
Orange ArancioOrange Arancio Orange Arancio Orange Arancio Orange Arancio Orange Arancio Orange Arancio Orange Arancio Orange Arancio Orange Arancio Orange Arancio Orange Arancio Orange Arancio Orange Arancio Orange Arancio Orange Arancio Orange Arancio Orange Arancio Orange Arancio Orange Arancio Orange Arancio Orange Arancio Orange Arancio Orange Arancio
5”5”5”5”5”5”7”7”7”7”7”7”
9-3/4”9-3/4”9-3/4”9-3/4”9-3/4”9-3/4”
20”20”20”20”20”20”
1/2”GAS3/4”GAS1”GAS
1/2”NPT3/4”NPT1”NPT
1/2”GAS3/4”GAS1”GAS
1/2”NPT3/4”NPT1”NPT
1/2”GAS3/4”GAS1”GAS
1/2”NPT3/4”NPT1”NPT
1/2”GAS3/4”GAS1”GAS
1/2”NPT3/4”NPT1”NPT
1616161616161616161616161212121212121 1 1 1 1 1
Orange ArancioOrange Arancio Orange Arancio Orange Arancio Orange Arancio Orange Arancio Orange Arancio Orange Arancio Orange Arancio Orange Arancio Orange Arancio Orange Arancio Orange Arancio Orange Arancio Orange Arancio Orange Arancio Orange Arancio Orange Arancio Orange Arancio Orange Arancio Orange Arancio Orange Arancio Orange Arancio Orange Arancio
Code Codice
ModelModello
HightAltezza
Sump colorColore vaso
Inlet/outletEntrata/Uscita
Head colorColore testa
VolumeImballo
QTYScatola
Orange ArancioOrange ArancioOrange ArancioOrange ArancioOrange Arancio
26.2503.5526.2603.5526.2703.5526.2803.5526.2903.55
HHHHHHHHHH
Orange ArancioOrange ArancioOrange ArancioOrange ArancioOrange Arancio
20”20”20”20”20”
1/2”NPT3/4”NPT1”NPT
1-1/4”NPT1-1/2”NPT
1 1 1 1 1
0,01140,01140,01140,01140,0114
0,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,01140,01140,01140,01140,01140,0114
9
Code Codice
ModelModello
HightAltezza
Sump colorColore vaso
Inlet/outletEntrata/Uscita
Head colorColore testa
VolumeImballo
QTYScatola
Stagon PR housings bodies are manufactured of CLEAR FDA gradePolycarbonate. Caps are molded with BRASS inserted inlet/outlet.I filtri Stagon modello PR hanno il Vaso TRASPARENTE in Policarbonato gradoFDA. Le testate sono con inserti in OTTONE.
Working PressurePressione di esercizio
Maximum PressurePressione massima
Max. TemperatureTemperatura max.
Chemical compatibilityComp. ai prod. chimici
145 PSI 10 BAR 508 PSI 40 BAR 122° F 50° C Scarce Scarsa
Head MaterialMateriale Testata
PolyamidePoliamide
Sump MaterialMateriale Vaso
FDA grade SANPolicarbonato grado FDA
Air Relief ValveValvola di Sfiato
BrassOttone
O-ringOR
NBR 70SHA
22.5501.02 22.5601.0222.5701.0222.5801.0222.5901.0222.5503.0222.5603.0222.5703.0222.5803.0222.5903.0222.7501.0222.7601.0222.7701.0222.7801.0222.7901.0222.7503.0222.7603.0222.7703.0222.7803.0222.7903.0222.9501.0222.9601.0222.9701.0222.9801.0222.9901.0222.9503.0222.9603.0222.9703.0222.9803.0222.9903.0222.2501.0222.2601.0222.2701.0222.2801.02
PRPRPRPRPRPRPRPRPRPRPRPRPRPRPRPRPRPRPRPRPRPRPRPRPRPRPRPRPRPRPRPRPRPR
Clear Trasp.Clear Trasp.Clear Trasp.Clear Trasp.Clear Trasp.Clear Trasp.Clear Trasp.Clear Trasp.Clear Trasp.Clear Trasp.Clear Trasp.Clear Trasp.Clear Trasp.Clear Trasp.Clear Trasp.Clear Trasp.Clear Trasp.Clear Trasp.Clear Trasp.Clear Trasp.Clear Trasp.Clear Trasp.Clear Trasp.Clear Trasp.Clear Trasp.Clear Trasp.Clear Trasp.Clear Trasp.Clear Trasp.Clear Trasp.Clear Trasp.Clear Trasp.Clear Trasp.Clear Trasp.
5”5”5”5”5”5”5”5”5”5”7”7”7”7”7”7”7”7”7”7”
9-3/4”9-3/4”9-3/4”9-3/4”9-3/4”9-3/4”9-3/4”9-3/4”9-3/4”9-3/4”
20”20”20”20”
1/2” GAS3/4” GAS1” GAS
1-1/4” GAS1-1/2” GAS1/2” NPT3/4” NPT1” NPT
1-1/4” NPT1-1/2” NPT1/2” GAS3/4” GAS1” GAS
1-1/4” GAS1-1/2” GAS1/2” NPT3/4” NPT1” NPT
1-1/4” NPT1-1/2” NPT1/2” GAS3/4” GAS1” GAS
1-1/4” GAS1-1/2” GAS1/2” NPT3/4” NPT1” NPT
1-1/4” NPT1-1/2” NPT1/2” GAS3/4” GAS1” GAS
1-1/4” GAS
1616161616161616161616161616161616161616121212121212121212121 1 1 1
BlueBlueBlueBlueBlueBlueBlueBlueBlueBlueBlueBlueBlueBlueBlueBlueBlueBlueBlueBlueBlueBlueBlueBlueBlueBlueBlueBlueBlueBlueBlueBlueBlueBlue
0,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,06770,01140,01140,01140,0114
10
Code Codice
ModelModello
HightAltezza
Inlet/outletEntrata/Uscita
VolumeImballo
41.9700.0041.9900.00 41.9702.00 41.9902.00 41.2700.00 41.2900.00 41.2702.00 41.2902.00
LCLC LCLCLCLCLCLC
9-3/4”9-3/4”9-3/4”9-3/4”
20”20”20”20”
1”GAS1-1/2”GAS
1”NPT1-1/2”NPT
1”GAS1-1/2”GAS
1”NPT1-1/2”NPT
Code Codice
ModelModello
HightAltezza
Sump colorColore vaso
Inlet/outletEntrata/Uscita
Head colorColore testa
VolumeImballo
QTYScatola
22.2901.0222.2503.02 22.2603.02 22.2703.02 22.2803.02 22.2903.02
PRPRPRPRPRPR
Clear Trasp.Clear Trasp. Clear Trasp. Clear Trasp. Clear Trasp. Clear Trasp.
20”20”20”20”20”20”
1-1/2”GAS1/2”NPT3/4”NPT1”NPT
1-1/4”NPT1-1/2”NPT
1 1 1 1 1 1
Blue Blue Blue Blue Blue Blue
183mm ( 7,2”) 183mm ( 7,2”)
0,01140,01140,01140,01140,01140,0114
QTYScatola
0,01860,01860,01860,01860,02980,02980,02980,0298
11111111
11
Stagon OS housings are all in white color, caps areavailable with 1/4” or 3/8” for domestic RO units.OSV housings wiht 1/8” hole on the outlet side of the caps.
I filtri Stagon modello OS sono di colore biancocon attacchi da 1/4” o 3/8” per osmosi domestico.Il modello OSV ha un foro da 1/8” in uscita.
Working PressurePressione di esercizio
Maximum PressurePressione massima
Max. TemperatureTemperatura max.
116 PSI 8 BAR 362 PSI 25 BAR 122° F 50° C
Head MaterialMateriale Testata
PolyamidePoliamide
Sump MaterialMateriale Vaso
Polypropylene reinforced
O-ringOR
NBR 70SHA
Code Codice
ModelModello
HightAltezza
Sump colorColore vaso
Inlet/outletEntrata/Uscita
Head colorColore testa
VolumeImballo
QTYScatola
24.5300.1124.5400.11 24.5100.11 24.7300.11 24.7400.11 24.7100.11 24.9300.11 24.9400.11 24.9100.11 24.2300.11 24.2400.11 24.2100.11 24.5310.11 24.7310.11 24.9310.11 24.2310.11
OSOSOSOSOSOSOSOSOSOSOSOS
OSVOSVOSVOSV
White BiancoWhite Bianco White Bianco White Bianco White Bianco White Bianco White Bianco White Bianco White Bianco White Bianco White Bianco White Bianco White Bianco White Bianco White Bianco White Bianco
5”5”5”7”7”7”
9-3/4”9-3/4”9-3/4”
20”20”20”5”7”
9-3/4”20”
1/4”GAS3/8”GAS
3/8 Push In1/4”GAS3/8”GAS
3/8 Push In1/4”GAS3/8”GAS
3/8 Push In1/4”GAS3/8”GAS
3/8 Push In1/4”GAS1/4”GAS1/4”GAS1/4”GAS
1616161616161212121 1 1
1616121
White BiancoWhite Bianco White Bianco White Bianco White Bianco White Bianco White Bianco White Bianco White Bianco White Bianco White Bianco White Bianco White Bianco White Bianco White Bianco White Bianco
0,06770,06770,06770,06770,06770,06770,06770,06770,06770,01140,01140,01140,06770,06770,06770,0114
12
Code Codice
ModelModello
HightAltezza
Sump colorColore vaso
Inlet/outletEntrata/Uscita
Head colorColore testa
VolumeImballo
QTYScatola
24.5300.0124.5400.01 24.5100.01 24.5300.01 24.5400.01 24.5100.01 24.7300.01 24.7400.01 24.7100.01 24.7300.01 24.7400.01 24.7100.01 24.5310.01 24.5310.01 24.7310.01 24.7310.01
OCOCOCOCOCOCOCOCOCOCOCOC
OCVOCVOCVOC V
Clear Transp.Clear Transp. Clear Transp. Clear Transp. Clear Transp. Clear Transp. Clear Transp. Clear Transp. Clear Transp. Clear Transp. Clear Transp. Clear Transp. Clear Transp. Clear Transp. Clear Transp. Clear Transp.
5”5”5”7”7”7”
9-3/4”9-3/4”9-3/4”
20”20”20”5”7”
9-3/4”20”
1/4”GAS3/8”GAS
3/8 Push In1/4”GAS3/8”GAS
3/8 Push In1/4”GAS3/8”GAS
3/8 Push In1/4”GAS3/8”GAS
3/8 Push In1/4”GAS1/4”GAS1/4”GAS1/4”GAS
1616161616161212121 1 1
1616121
White BiancoWhite Bianco White Bianco White Bianco White Bianco White Bianco White Bianco White Bianco White Bianco White Bianco White Bianco White Bianco White Bianco White Bianco White Bianco White Bianco
Stagon OC housings bodies are clear, caps areavailable with 1/4” or 3/8” for domestic RO units.OSV housings wiht 1/8” hole on the outlet side of the caps.
I filtri Stagon modello OS sono di colore trasparentecon attacchi da 1/4” o 3/8” per osmosi domestico.Il modello OSV ha un foro da 1/8” in uscita.
Working PressurePressione di esercizio
Maximum PressurePressione massimo
Max. TemperatureTemperatura max.
116 PSI 8 BAR 362 PSI 25 BAR 122° F 50° C
Head MaterialMateriale Testata
PolyamidePoliamide
Sump MaterialMateriale Vaso
FDA grade SANStyrene-Acrylonitrile
O-ringOR
NBR 70SHA
Code Codice Descrizione
VolumeImballo
Chiave di serraggioStaffa singolaStaffa singola biancaStaffa doppiaStaffa doppia biancaStaffa triplaStaffa tripla in metalloNipplo in plastica 3/4”GASChiave di serraggio LC
Spanner wrenchSingle Mounting bracketSingle Mounting bracket whiteDouble mounting bracketDouble mounting bracket whiteTriple mounting bracketTriple mounting bracket in metalPlastic nipples 3/4”GasSpanner Wrench for LC
MSWMBS
MBSWMBD
MBDWMBTWMBTM NP34
MSWLC/LC
Description
0,06770,06770,06770,06770,06770,06770,06770,06770,06770,01140,01140,01140,06770,06770,06770,0114
13
Code Codice
33.9340.0033.9100.00 33.9114.00 33.9112.00 33.9200.00 33.2340.00 33.2100.00 33.2114.00 33.2112.00 33.2000.00
ModelModello
BPBPBPBPBPBPBPBPBPBP
HightAltezza
9-3/4”9-3/4” 9-3/4”9-3/4”9-3/4”
20”20”20”20”20”
Inlet/outletEntrata/Uscita
3/4”GAS1”GAS
1-1/4”GAS1-1/2”GAS
2”GAS3/4”GAS1”GAS
1-1/4”GAS1-1/2”GAS
2”GAS
Stagon BP housings are combination of Nikel-Plated brass head and FDA grade SAN whit drain sump.I filtri Stagon modello BP hanno vaso in SAN grado FDA e testata in Ottone Nikelato.
Working PressurePressione di esercizio
Maximum PressurePressione massimo
Max. TemperatureTemperatura max.
145 PSI 10 BAR 508 PSI 40 BAR 122° F 50° C
Head MaterialMateriale Testata
Nichel-plated BRASSOttone nichelato
Sump MaterialMateriale Vaso
FDA grade SANStyrene-Acrylonitrile
O-ringOR
NBR 70SHA
Code Codice
ModelModello
HightAltezza
Inlet/outletEntrata/Uscita
3/4”GAS1”GAS
1-1/4”GAS1-1/2”GAS
2”GAS3/4”GAS1”GAS
1-1/4”GAS1-1/2”GAS
2”GAS
9-3/4”9-3/4” 9-3/4”9-3/4”9-3/4”
20”20”20”20”20”
SBSBSBSBSBSBSBSBSBSB
31.9340.0031.9100.00 31.9114.00 31.9112.00 31.9200.00 31.2340.00 31.2100.00 31.2114.00 31.2112.00 31.2200.00
Stagon SB housings are the combination of Nichel-platedbrass head and Stainless Steel AISI304 sump.I filtri Stagon modello SB hanno il vaso in acciaio AISI304 e testata in Ottone Nikelato.
Flow RateFlusso
Maximum Working PressurePressione massimo lavoro
Max. TemperatureTemperatura max.
2,5 - 16 m3/h 290 PSI 20 BAR 195° F 90° C
14
Stagon SH housings are totaly in Stainless Stell AISI 316I filtri Stagon modello SH sono completamente in AISI 316
Code Codice
ModelModello
HightAltezza
Inlet/outletEntrata/Uscita
3/4”GAS1”GAS
3/4”GAS1”GAS
9-3/4”9-3/4”
20”20”
SHSHSHSH
32.9340.0032.9100.00 32.2340.00 32.2100.00
FLOW RATE VALUESThe Flow rate of thefollowing table report nominal values verifyed according with UNI 1034 having a pressure drop between in-jet and out-jet of 0,2 bar. As known this values dipend on shape and dimension of the water way housing, the filtering element type and purity of the water. Anyway you can have higher flow rate with higher pressure drop. For these reason the values are approximate:A: A tapical curve flow rate as function of pressure drop in a complate filter with cartrigeB: The curve of an empty housingC: The curve of the cartridge obtained by the difference A-B
PERDITE DI CARICOLa tabella adiacente riporta i valori di portata nominale dei filtri verificata come da UNI 10304 avendo tra ingres-so ed uscita dal filtro una perdita di carico (Delta P) di 0,2 bar. Come noto questa dipende da forma e dimensio-ni dei passaggi d’acqua dei contentori, dal tipo di elementoo filtrante, dal grado di pulizia di essi e della purezza dell’acqua in ingresso. Sono compatibili con i filtri portate superiori a quelle nominali dichiarate ma con perdite di carico (Delta P) crescenti.Per queste ragioni i dati in tabella sono indicativi. A scopo esplicativo nel diagramma illustativo si notano:A: Un esempio di curva Portata/Delta P di un filtro completo di cartucciaB: La curva di un contenitore vuotoC: Ottenuta la differenza (A B) è la curva caratteristica della cartuccia
15
Working PressurePressione di esercizio
Maximum PressurePressione massimo
Max. TemperatureTemperatura max.
210 PSI 15 BAR 508 PSI 40 BAR 195° F 90° C
Head MaterialMateriale Testata
SS316AISI 316
SS316AISI 316
Sump MaterialMateriale Vaso
O-ringOR
NBR 70SHA
9- 3/4”
attacco 1/2”attacco 3/4”attacco 1”attacco 1 1/4”attacco 1 1/2”
0,2 bar0,2 bar0,2 bar0,2 bar0,2 bar
2,2 M3/H3,5 M3/H5 M3/H6 M3/H8 M3/H
1,9 M3/H3 M3/H4,4 M3/H5,2 M3/H7 M3/H
2 M3/H3,3 M3/H4,5 M3/H5,4 M3/H7,2 M3/H
1,2 M3/H1,9 M3/H2,75 M3/H
--
0,6 M3/H0,8 M3/H1,1 M3/H
--
Delta P PM 25µ WR 60µEP EAEmpty housings
Contenitore vuoto
1
0.8
0.6
0
0.2
0.4
0 5
A C B
10 15
CADU
TA P
RESS
IONE
- PR
ESSU
RE D
ROP
PORTATA - FLOW RATE
SP cartridges are ideal for sediment reductionCotton cord and stainless steel core is available
La cartuccia SP è ideale per la riduzione dei sedimenti.Disponibile anche filo in cotone e anima in acciaio
CAPA cartridges are Woundpoypropylene with GAC
Cartuccia CAPA è filo avvoltoin polipropilene con carbonegranulare.
CAPA 5CAPA 7CAPA 9
CAPA 20
QTYScatola
606060606060303030303030303030303030303030303030303030303030303030303030
QTYScatola
88444020
16
Temp in °F 86122158180
PSI D 60503015
Temp in °F 30507080
BAR P 4,13,42,11,0
420 gr/6 psi
350 gr/5 psi
280 gr/4 psi
210 gr/3 psi
140 gr/2 psi
70 gr/1 psi
1 GPM4 Lmin
3 GPM12 Lmin
4 GPM16 Lmin
8 GPM20 Lmin
2 GPM8 Lmin
1µM
3µM
5µM
10µM
20µM
30µM
DÉBIT / ∆P - FLOW RATE VS ∆P
Micron LengtAltezza(mm)
OD/DE(mm)
52050510205052050520505205051020505102050
125125125
250-251250-251250-251250-251
500500500750750750100010001000248248248248496496496496
62626262626262626262626262626262113113113113113113113113
Codice / Code
5-SPUN-55-SPUN-205-SPUN-509-SPUN-5
9-SPUN-109-SPUN-209-SPUN-5020-SPUN-5
20-SPUN-2020-SPUN-5030-SPUN-5
30-SPUN-2030-SPUN-5040-SPUN-5
40-SPUN-2040-SPUN-50J9-SPUN-5
J9-SPUN-10J9-SPUN-20J9-SPUN-50J20-SPUN-5
J20-SPUN-10J20-SPUN-50J20-SPUN-50
SPUN is a meltblown polypropylne depth filter.It operates in a wide set of conditions without loosefibers to foul the filtrate, unlike wound and resinbonded cartridges which releasesubstantial fiber contamination during the early filtrationperiod or when stressed such as toward the end of thecartridge life. SPUN is manufactured from all FDA gradepolypropylene - no recycled materials and no additives.Pre-rinse is not necessary, and there is no foaming.Integrity of the fused fiber matrix eliminates the necessity ofa core. True graded density assures high dirt holding capacityand a longer cartridge life.
Le cartucce SPUN sono in Polipropilene estruso.Possono essere usate in diversi campi di filtrazione, a differenza del filo avvolto non perdono fibre sia nelle fasi iniziali che a fine vita.Sono costruite in FDA grado di polipropilene, senza additivi.Il prelavaggio non è necessario, inoltre non creano schiuma.La loro densità assicura una filtrazione di grande livello, conuna lunga vita.
QTYScatola
100100100505050502525252525252525252020202010101010
17
Cartuccia polifosfati sono efficaci per trattamento anticalcare.
QTYScatola
100504040
Carbone Attivato Granulare Carbone attivato granulare usato per rimuovere dall’acqua sapori,odori, cloro ed altri contaminanti.
QTYScatola
100504040
Carboni attivi granulare, sacco da 25 Kg
20
Ultraviolet Disinfection, UVC Disinfezione con raggi Ultravioletti, UVC
Portata / Flow rate
Pressione lavoro / working pressure
Temperatura di lavoro / Working temperature
Lampada / Lamp
Irraggiamento / Irradiation
IN / OUT
Unità elettronica di comando CE / CE Electronic ballast unit
150 l/h
0,5-5 bar
2-40°C
11W/7500H
36.000 µWsec/cm2
3/8”
230 Vac 50Hz
UV1
21
modello testa vaso ingressi Pressione di lavoro MASSIMA Temp. Massima
type head bowl inlet outlet Max working pressure Temp. Max
ST
SN
AB
AG
HH
HN
PR
LC
OS-OSV
OC-OCV
BP
SB
COUNTER TOP
BLU
BLU
BLU
BLU
ARANCIOORANGEARANCIOORANGE
BLU
BLU
BIANCOWHITE
TRASPARENTECLEAR
TRASPARENTECLEARBIANCOWHITE
BIANCOWHITE
ARANCIOORANGE
TRASPARENTECLEAR
BLU
BIANCOWHITE
TRASPARENTECLEAR
TRASPARENTECLEAR
AISI
TRASPARENTECLEAR
ARANCIOORANGE
BIANCOWHITE
OTTONENICK.
OTTONENICK.
BIANCOWHITE
OTTONEBRASS
PLASTICAPLASTICOTTONEBRASS
PLASTICAPLASTICOTTONEBRASS
PLASTICAPLASTICOTTONEBRASS
PLASTICAPLASTIC
PLASTICAPLASTIC
PLASTICAPLASTIC
OTTONEBRASS
OTTONEBRASS
PLASTICAPLASTIC
10 bar_145psi
10 bar_145psi
12 bar_174psi
12 bar_174psi
15 bar_218psi
15 bar_218psi
10 bar_145psi
10 bar_145psi
8 bar_116psi
8 bar_116psi
10 bar_145psi
20 bar_290psi
8,6 bar_125psi
50°C
50°C
50°C
50°C
80°C
80°C
80°C
50°C
50°C
50°C
50°C
90°C
50°C
colori personalizzabili, a richiestacustom colors version, on request