Fundamentos Da Rede Ethernetip
-
Upload
assis-nunes -
Category
Documents
-
view
47 -
download
5
description
Transcript of Fundamentos Da Rede Ethernetip
Copyright © 2012 Rockwell Automation, Inc. All rights reserved.
T19 – Fundamentos da Rede Ethernet/IP
Copyright © 2012 Rockwell Automation, Inc. All rights reserved.
Objetivos
� Fundamentos da EtherNet/IP
� O quê é, capacidades e características
� Conceito Básico de Redes
� modelos e padrões
� Aplicações de Controle Multidisciplinar e Informação
� Arquiteturas representativas
� Soluções de Switches Stratix
� EtherNet/IP : Vantagens que habilitam e impulsionam a convergenciade controle e informação
Copyright © 2012 Rockwell Automation, Inc. All rights reserved.
O que é Fundamental em uma Rede de Controle Industrial ?
� Padrão Aberto� Multiplos Fornecedores da Tecnologia� Topologia flexível (estrela, anel, linear, etc.)� Meio fisico flexível (cobre, fibra, wireless, etc.)� Tecnologia Consolidada – Referencias de Instalação� Tempo de Resposta adequada as aplicações tradicionais de controle� Rede Única p/ Multiplas aplicações (controle crítico, segurança e intertravamento,
controle de processos (repetibilidade), SOE, acionamentos e servoposicionamento, controle de batelada, integração transparente com sistemas de informação, etc.)
� Ferramentas padrões de diagnóstico e resolução de problemas� Simplicidade de uso e manutenção� Disponibilidade� Segurança� Imunidade a ruídos� Custo, Etc....
Copyright © 2012 Rockwell Automation, Inc. All rights reserved.
Copyright © 2012 Rockwell Automation, Inc. All rights reserved.
Redes IndustriaisTendencia contínua
� Redes Abertas são requisitos fortes� Ampla disponibilidades de produtos, aplicações e fornecedores para Sistemas de Automação e Controle Industriais (IACS)
� Padrões de Rede para coexistencia e interoperabilidade� Convergência das Tecnologias de Rede
� Redução do numero de diferentes redes em operação e compartinhamento transparente da informação em toda a planta
� Projeto de redes e ferramentas de diagnóstico comuns em toda a planta e coorporação; evitar ferramentas especiais para cada aplicação
� Melhor utilização de Ativos (iniciativas “lean”)� Reduzir treinamento, suporte, e estoque para diferentes tecnologias de rede
� Ativos de infraestrutura de rede comuns.� Preparada p/ o Futuro – Maximizar os Investimentos
� Suporte a novas tecnologias e demandas
Copyright © 2012 Rockwell Automation, Inc. All rights reserved.
EtherNet/IP“IP” refere-se a “Industrial Protocol”
� Padrões
� IEEE 802.3 - standard Ethernet, Precision Time Protocol (IEEE-1588)
� IETF - Internet Engineering Task Force, standard Internet Protocol (IP)
� IEC - International Electrotechnical Commission
� ODVA - Common Industrial Protocol (CIP)
� Integração com TI e preparada para o futuro (Sustentabilidade)
� Tecnologia consolidada - produtos, aplicações e fornecedores
� Plataforma multidisciplinar para controle e informação
� ODVA
� Suportada for fornecedores globais:Cisco Systems®, Omron®, Schneider Electric®Bosch Rexroth AG® e Rockwell Automation
� Aprovada em testes de desempenho e Conformidade
http://www.odva.org
6
Copyright © 2012 Rockwell Automation, Inc. All rights reserved.Copyright © 2011 Rockwell Automation, Inc. All rights reserved. 7
EtherNet/IP = Ethernet PadrãoEthe
rNet/IP
Outras“Ethernet”
Standard
Copyright © 2012 Rockwell Automation, Inc. All rights reserved.
Ethernet Industrial
Fonte: IMS Research
Rockwell Automation, Bosch Rexroth, Omron e Schneider Electric usa EtherNet/IP como base tecnológica.
Varios outros fornecedores também utilizam EtherNet/IP.
Ethernet TCP/IPPadrão, não modificada
• Padrão:– Tecnologia de ponta– Comporta informações
comerciais e industriais emuma infraestrutura comum
– Rede com capacidade paramilhares de nós
– Topologia flexivel e compatível com sua planta
– Diversos fornecedores– Ampla gama de produtos
EtherNet/IP é o lider global em número de nós vendidos
8
Copyright © 2012 Rockwell Automation, Inc. All rights reserved.
EtherNet/IP – Consolidada (lista parcial)
EtherNet/IPEtherNet/IP
300+ fabricantes
Copyright © 2012 Rockwell Automation, Inc. All rights reserved.
EtherNet/IP - Benefícios
� Integração com TI – Ethernet Padrão e protocolos TCP/IP • Habilitada para o futuro – Sustentabilidade
� Padrão Industrial como IEEE e IETF
� Escalabilidade e Mobilidade� Independencia entre camadas física e de enlace – transparencia no acesso a dados
� Tecnologia consolidada – mais de 300 fornecedores e 4.500.0000 nós
� Intercambialidade – Os produtos passam por testes de conformidade
� Suporte multidisciplinar� Controle discreto, controle de Processo, controle de Batelada, controle de segurança, configuração, informação/diagnóstico, sincronismo, controle de posição e gerenciamento de energia
� Protocolo de comunicação CIP� DeviceNet e ControlNet também utilizam CIP
� Integração transparente entre redes CIP
Copyright © 2012 Rockwell Automation, Inc. All rights reserved.
Convergência das Redes IndustriaisTendencia contínua
InformaçãoControleE/S
AplicaçõesSegurança
Motion Control
Convergência de Redes Industriais
Evolução das aplicações de Ethernet industrial
EtherNet/IP – Habilitando & impulsionando a Convergencia de Controle Industrial e Informação com TI
Alta Disponibilidade
Copyright © 2012 Rockwell Automation, Inc. All rights reserved.
Rede Industrial de Convergência (TI/TA)
EtherNet/IP – proporciona a convergência do Controle e Informação
Modelo de Rede Industrial de Convergência
Corporate Network
Sensors and otherInput/Output Devices
Motors, DrivesActuators
SupervisoryControl
Robotics
Back-Office Mainframes andServers (ERP, MES, etc.)
OfficeApplications,Internetworking,Data Servers,Storage
Human MachineInterface (HMI)
SafetyController
Modelo de Rede Industrial Tradicional em 3 camadas
Corporate Network
Sensors and otherInput/Output Devices
Controller
Motors, DrivesActuators
Robotics
Back-Office Mainframes andServers (ERP, MES, etc.)
OfficeApplications,Internetworking,Data Servers,Storage
Control NetworkGateway
Human MachineInterface (HMI)
SupervisoryControl
Camera
Phone
Industrial NetworkIndustrial Network
SafetyI/O
I/O
Controller
12
EtherNet/IP – Habilitando & Impulsionando a Convergencia de Controle Industrial e Informação com TI
Copyright © 2012 Rockwell Automation, Inc. All rights reserved.
Modelo de Referencia OSIOpen Systems Interconnection
Application
Presentation
Session
Transport
Network
Data Link
Physical
Layer 7
Layer 6
Layer 5
Layer 4
Layer 3
Layer 2
Layer 1
Network Services to User App
Encryption/Other processing
Manage Multiple Applications
Reliable delivery/Error correction
Logical addressing - Routing
Media Access Control
Specifies voltage, pin-outs, cable
CIP
TCP - UDP
IP
IEEE 802.3
TIA - 1005
Routers
Switches
Cabling
Layer Name Layer No. Function Examples
CIP
Modelo TCP/IP (5 camadas)
O que faz da EtherNet/IP industrial?
Camada Física“industrial”
Infraestrutura“industrial”
Protocolo Comumda camada Aplicação
Copyright © 2012 Rockwell Automation, Inc. All rights reserved.
Modelo de Referencia OSIPilha de Protocolos
Application
Presentation
Session
Transport
Network
Data Link
Physical
Layer 7
Layer 6
Layer 5
Layer 4
Layer 3
Layer 2
Layer 1
TCP - UDP
IP
IEEE 802.3
TIA - 1005
Layer Name Layer No. Function
CIP
Camadas deAplicação
CamadasTransporte
Copyright © 2012 Rockwell Automation, Inc. All rights reserved.
Modelo de Referencia OSIPilha de Protocolos
Application
Presentation
Session
Transport
Network
Data Link
Physical
Layer 7
Layer 6
Layer 5
Layer 4
Layer 3
Layer 2
Layer 1
TCP - UDP
IP
IEEE 802.3
TIA - 1005
Layer Name Layer No. Function
CIPModbus TCPPCCC/CSP
HTTPVoIP
Coexistencia
Coexistencia Interoperabilidade
Copyright © 2012 Rockwell Automation, Inc. All rights reserved.
Modelo de Referencia OSIIndependencia da camada física
Application
Presentation
Session
Transport
Network
Data Link
Physical
Layer 7
Layer 6
Layer 5
Layer 4
Layer 3
Layer 2
Layer 1
TCP - UDP
IP
IEEE 802.3
Copper
Layer Name Layer No. Function
CIP
IndependenciaCamada Física
Fiber
Copyright © 2012 Rockwell Automation, Inc. All rights reserved.
IEEE 802.3
Fiber
IEEE 802.11
Wi-Fi
Modelo de Referencia OSIIndependencia da Camada de Enlace
Application
Presentation
Session
Transport
Network
Data Link
Physical
Layer 7
Layer 6
Layer 5
Layer 4
Layer 3
Layer 2
Layer 1
TCP - UDP
IP
Layer Name Layer No. Function
CIP
Protocolo IP padrão permite Portabilidade e Roteamento transparente
IndependenciaCamada de Enlace
Copyright © 2012 Rockwell Automation, Inc. All rights reserved.
Layer 1 – Camada FísicaHalf x Full Duplex
� Half Duplex� Uma estação transmite, outras escutam.� Enquanto transmite, você não recebe.� Se alguem mais transmite enquanto você está transmitindo, umacolisão ocorre
� Qualquer condição “Receive-while-Transmit” é considerada umacolisão
� Caracteristica NÃO-DETERMINISTICA
� Full Duplex (padronizada na 802.3x)� Transmite e recebe ao mesmo tempo.� Sem detecção de colisão, interrupção, nova tentativa, etc.� Livre de colisão. Não CS, não MA, não CD. Única relação com Half Duplex é o formato do frame & metodo de “encoding/signaling”
� Caracteristica DETERMINISTICA
Copyright © 2012 Rockwell Automation, Inc. All rights reserved.
Layer 2 – Camada de EnlaceSwitching
� Multi-port Bridge
� Ethernet progrediuexponencialmente desde queswitches foram introduzidos
� Custo� Performance� Colisão vs. Determinismo
� Multiplos dispositivostransmitindo ao mesmo tempo
Each node has 100 Mbps
Switched Ethernet 100
Ethernet Switch
Each node has 100 Mbps
Layer 2Domain
Copyright © 2012 Rockwell Automation, Inc. All rights reserved.
Layer 2 – Camada de EnlaceOpções de Switches
• Industrial versus Comercial• Gerenciavel versus Não-gerenciável
Vantagens Desvantagens
Switch Gerenciável
Switch NãoGerenciável
• Previne loops
• Informação p/ Diagnóstico
• Segmentação serviços(VLANs)
• Prioriização trafego (QoS)
• Resiliência de Rede
• Serviços de Segurança
• Gerenciamneto de Multicast
• Mais baratos
• Setup simple
• Mais caros
• Requer certo nível de suporte e configuração
• Sem capacidade de gerenciamento
• Sem serviços de segurança
• Sem informações de diagnóstico
• Sem suporte a protocolos de resiliencia
• Não previne loops
Copyright © 2012 Rockwell Automation, Inc. All rights reserved.
Layer 3 – Camada de RedeRouting
� Switch/roteia pacotes por endereço IP.
� Expande abrangencia da rede� LAN, WAN
� Conecta diferentes LANs� Controle de broadcast� Controle de multicast
� Caracteristicas de Layer 3 comosegurança, QoS, resiliencia, etc.
WAN
Default Gateway10.10.10.110.17.10.1
10.17.10.56
10.10.10.56
VLAN 17Subnet 10.17.10.0/24
VLAN 10Subnet 10.10.10.0/24
Copyright © 2012 Rockwell Automation, Inc. All rights reserved.
Layer 4 – Camada TransporteSegment
UDP Header
TCP Header
� Fornece serviço de entrega de dados “fim-a-fim" para a camada de aplicação.
� Responsável pela confiabilidade da comunicação.� TCP – Transmission Control Protocol
• Transporte orientado a conexão.
• Quebra a mensagem em fragmentos caso seja maior que 1500 bytes
• Comunicação ponto-a-ponto
• No destino os fragmentos são remontados na ordem correta
� UDP – User Datagram Protocol• Não necessita de conexão
• A mensagem é transmitida em um único pacote
• Comunicação ponto-a-ponto, multicast e broadcast
• Protocolo simples e rápido de transporte
• Ideal para dados críticos e relativamente simples como I/Os
Copyright © 2012 Rockwell Automation, Inc. All rights reserved.
PLANT
MACHINE
Guten tag?
Bonjour?
Layer 7 – Camada de AplicaçãoCommon Industrial Protocol
Hello. How are you?
Hi.I’m great.
Uma linguagem consolidada, aberta, comum, padrão é tudo!!
Copyright © 2012 Rockwell Automation, Inc. All rights reserved.
Layer 1 – Camada FísicaTopologia – Linear/tronco
LinearNível dispositivo
LinearNível de Switch
Fundamentals of EtherNet/IP NetworkingCopyright © 2012 Rockwell Automation, Inc. All rights reserved.
Copyright © 2012 Rockwell Automation, Inc. All rights reserved.
Layer 1 – Camada FísicaTopologia – Estrela / Estrela Redundante
Estrela Estrela redundante
Copyright © 2012 Rockwell Automation, Inc. All rights reserved.
Layer 1 – Camada FísicaTopologia – Anel
AnelNivel Dispositivo Anel
Nível Switch
Copyright © 2012 Rockwell Automation, Inc. All rights reserved.
Layer 7 – Camada de AplicaçãoCommon Industrial Protocol
Layer 7
Layer 4
Layer 3
Layer 2
Layer 1
Layer No.
• Conjunto padrão de serviços para acessoaos dados e controleda operação de dispositivos industriais
• Padrão para integrarcontrole E/S, configuração de dispositivos e aquisiçãode dados em sistemasindustriais de automação e controle
odva.org
Copyright © 2012 Rockwell Automation, Inc. All rights reserved.
Layer 7 – Camada de AplicaçãoCommon Industrial Protocol
� Ethernet 802.3 Padrão
� Suite IETF TCP/IP Padrão
� Protocolo camada Aplicação -Common Industrial Protocol (CIP)
� EtherNet/IP = Ethernet + IP + CIP
� TCP and UDP na camadaTransporte
� IP Unicast e Multicast na rede
� Endereçamento IP estático p/ dispositivos
FTP HTTP OPC SNMPBOOTP
DHCP
IP
IEEE 802.3 Ethernet
OSPFICMP
IGMP
RARPARP
ExplicitTraffic
ControlTraffic
UDP
CIP
TCP
EtherNet/IP especifica como pacotes CIP podem ser Transportadossobre Ethernet e TCP/IP padrões
Copyright © 2012 Rockwell Automation, Inc. All rights reserved.
CIP SafetyLayer 7 - Aplicação
• Extensão de aplicação da Ethernet/IP (CIP)
• Serviços de segurança de Alta-Integridade e Mensagens para CIP
– Redundancia de Dados- dado enviado 2X (atual & invertido)
– CRC Segurança redundante – (atual & inverted)
– CRC Segurança Fim-a-Fim – CRCs individual p/ dados (atual & invertido) e mensagem geral
– Todo pacote possui um Time stamp
• IEC 61508 – SIL3 and EN 954-1 - Cat 4
• Dois comportamentos devem ser implementados:
– Transferencia Real-Time de dados de segurança
– Configuração dispositivos segurança
Copyright © 2012 Rockwell Automation, Inc. All rights reserved.
CIP SafetyLayer 7 - Aplicação
Safety I/O
Safety I/OSafety I/O
I/O
I/O
Safety Controller
Safety ControllerController
CameraHMI
VFD
Safety I/O
Catalyst 3750StackWise
Catalyst 2960FactoryTalk
Server
Copyright © 2012 Rockwell Automation, Inc. All rights reserved.
CIP SyncLayer 7 - Aplicação
� Extensão de aplicação da Ethernet/IP (CIP)� Define serviços e objetos de sincronismo de tempo nas redes CIP� Permite componentes de controle distribuido compartilhar noção
de tempo comum� Implementa IEEE-1588
� Referenciado como precision time protocol (PTP)� Permite +/- 100 ns sincronismo (hardware-assisted clock)� Permite +/- 100 µs synchronization (software clock)
� Aplicações de Sincronismo de Tempo como:� Time stamp de entradas
� Alarmes e Eventos� Sequence of Events (SOE)� Deteção de primeira falha
� Saidas agendadas por tempo� ServoPosicionamento coordenado
FTP HTTP OPC SNMP
IP
IEEE 802.3 Ethernet
OSPF ICMP IGMP
RARPARP
UDP
CIP
TCP
Layer 1-2
Layer 3
Layers 5-7
Layer 4
SynchronizedClock Value
OptionalHardwareAssist
1588
Copyright © 2012 Rockwell Automation, Inc. All rights reserved.
CIP Sync – Exemplo de SOELayer 7 - Aplicação
EN2TR
L6X
GM
SOE
GPS
EN2TR
SOE
L6X
EN2TR
SOE
L6X
S
S S
S S S
CLX Chassis
#1
1732E- SOEArmor Block I/O #1
CLX Chassis
#2
CLX Chassis
#3
M S M S S M S S
Boundary Clock
Boundary Clock
Boundary Clock
System Time Source
Clocks on the Network are synchronized to +/- 100 Nanosecond Resolution
S
1732E- SOEArmor Block I/O #1
1732E- SOEArmor Block I/O #1
PTP Lingo� Ordinary Clock� Transparent Clock� Boundary Clock� Grand Master Clock
TransparentClock
Copyright © 2012 Rockwell Automation, Inc. All rights reserved.
CIP Motion Layer 7 - Aplicação
• Extensão do CIP• Objeto de eixos de movimento
Safety I/O
Safety I/OController
I/O
Safety Controller
I/OController
CameraHMI
VFD
Servo Drive Servo Drive
Copyright © 2012 Rockwell Automation, Inc. All rights reserved.
Arquiteturas Típicas
� Redes isoladas com únicocontrolador
� Exemplos� Solução p/ fabricante de Máquinas
Controller
VFDDrive
HMII/O I/O
ServoDrive
Controller
VFDDrive
HMI
I/O
I/O
ServoDrive
Controller
VFDDriveHMI
I/O
I/O
ServoDrive
Estrela
AnelLinear
Copyright © 2012 Rockwell Automation, Inc. All rights reserved.
Arquiteturas Típicas
� Rede isolada com múltiploscontroladores
� Exemplos� Multiplas máquinas ou linhas
Controller
VFDDrive
HMI
I/O I/O
ServoDrive
Controller
VFDDrive
HMI
I/O
I/O
ServoDrive
Stratix 8300
Controller
VFDDriveHMI
I/O
I/O
ServoDrive
Estrela
AnelLinear
Copyright © 2012 Rockwell Automation, Inc. All rights reserved.
Arquiteturas Típicas
� Sistemas de Controle Integrados e Conectados� Exemplos
� Rede de Planta� Multiplas Linhas de produção
Production - VLANs
VFDDrive
HMI
Stratix 8000/8300REP
Class 1 & 3Camera
SafetyController
ServoDrive
I/OSafety I/O
VLAN 43Camera
VLAN 43
Controller
VFDDrive
HMI
HMI
I/O
Controller
I/O
I/O
IP Camera - VLAN
Controller
I/O
Levels 0–2Cell/Area Zones
Industrial ZoneLevel 3
VLAN 17
Subnet 10.17.10.0/24
VLAN 10
Subnet 10.10.10.0/24
VLAN 16
Subnet 10.16.10.0/24
Convergence-Ready
Copyright © 2012 Rockwell Automation, Inc. All rights reserved.
A Familia de Switches StratixIntegrando os ambientes de chão de fábrica e TI
Redes pequenas e isoladas
Monitoração & controle de dispositivosdistribuídos
Otimizado paraChão de Fábrica e Integração com TI
Gerenciável Fixo• 4 e 8+1 Portas• Características para integração de dispositivos EtherNet/IP para controle de maquinas• RSLogix 5000 Add-On-Profile:• CIP permitindo integration transparente na Arquitetura Integrada com Logix & Faceplates FactoryTalkView
Não Gerenciável• Configurações de 4 a 8 Portas (cobre e fibra)• Baixo custo
Gerenciável e Modular• Configurações de 6 a 26 portas• Layer 2 e Layer 3 switching and routing
• Características para TI, Controle e Manufatura• Cisco Technology :• IOS, CLI, CNA – ferramentas comuns ao Cisco Catalyst
• RSLogix 5000 Add-On-Profile:• CIP permitindo integration transparente na Arquitetura Integrada com Logix & Faceplates FactoryTalkView
• CompactFlash – Contém IOS e sconfigurações do switch para fácil e rápida troca
Stratix 6000
Stratix 8000
Stratix 2000
2 port Switch
Tecnologia de Switches “Incorporados” • Tecnologia de 2 portas incorporadas a dispositivos de campo• Projetado para simplificar projeto e implementação, reduzindo custos
• Suporta topologias lineares e anel de alta performance (<3msec)• Diagnosticos, QoS, IGMP e 1588 PTP• Padrão aberto (ODVA) para compatibilidade com terceiros
Simplifica o projetoe implementação
da rede
Uma família única e escalar de switches industriaisDo chão de fábrica a integração com aplicações corporativas
Copyright © 2012 Rockwell Automation, Inc. All rights reserved.
Stratix 2000 – Switches não-gerenciáveis
• Opções incluem:
– 3 portas TP + 1 fibra
– 5 portas TP
– 6 portas TP + 1 fibra
– 8 portas TP
• Alimentação
– 10-24 VAC or 10-35 VDC power
• Negociação automatica de velocidade e modo duplex
• Detecção automática de cabo “cross-over”
Sem necessidade de Set-up ou Configuração
Copyright © 2012 Rockwell Automation, Inc. All rights reserved.
Stratix 6000™
� Switch Gerenciável� Opção com 4 portas ou 8 portas com uplink emFibra ótica
� Diagnóstico� Segurança� DHCP persistente por porta� Identificação de Usuário não autorizado� Monitoração de tráfego com Alarmes� FactoryTalk View Faceplates
Copyright © 2012 Rockwell Automation, Inc. All rights reserved.
StratixTM 8000Switches Gerenciáveis - Modular
Um produto único no mercado integrando os ambientes de Produção e Negocios
O melhor da Cisco• Integração segura nas redes corporativas
– Cisco internet operating system (IOSTM)– Arquitetura Cisco CatalystTM switch– Ferramentas conhecidas p/ pessoal IT: command
line interface (CLI), CNA and Device Manager
O Melhor da Rockwell Automation
• Interface na Arquitetura Integrada
– RSLogix 5000 for configuration (AOP)
– Tags pre-definidas para diagnóstico
– Faceplates
Ambiente industrial
• Facilidade na Integração e Manutenção
– Configurações padrãoes p/ redes de automação(Smartports)
– Compact Flash removível p/ fácil substituição
+
+
Stratix 8000
+
Copyright © 2012 Rockwell Automation, Inc. All rights reserved.
Stratix 8000 – Gerenciável Modular
Base Module(6-port or 10-port)
Extension Module A (8-port Copper)
Extension Module B (8-port Fiber)
Data Ports10/100 Copper
Dual Purpose Uplink Ports10/100/1000 Copper or SFP
8 Extended Data Ports10/100 Copper
8 Extended Data Ports100 Fixed Fiber
26-port 6-port to 26-port 6-port to
Copyright © 2012 Rockwell Automation, Inc. All rights reserved.
Switch Industrial Gerenciável – Stratix8000
Funcionalidade Aplicação
VLAN / VLAN Trunking Segmentação de tráfego Broadcast
DHCP (client) Atribuição de endereço IP
SNMP (v3) Gerenciamento
IGMP / IGMP snooping (with querier) Gerenciamento de tráfego multicast no modelo produtor-consumidor
Spanning Tree Protocol Eliminar laços na rede
Rapid Spanning Tree Protocol (RSTP) Recuperação rápida da rede após uma falha
Resilient Ethernet Protocol (REP) Prover continuidade operacional em caso de ruptura
Quality of Service (QoS) Priorizar o tráfico de dados críticos
Unauthorized User Identification Segurança
Traffic Level Monitor with Alarms Diagnóstico
Network Access Control (NAC) Proteção contra virus
Copyright © 2012 Rockwell Automation, Inc. All rights reserved.
Set-up Simplificado
1. Ligue o Stratix 8000
2. Pressione o botão Express Setup
3. Use o web browser de seu PCs p/ assinalar um endereço IP e senha
4. O Stratix 8000 se auto otimiza paraaplicações de automação
Express Setup
Não é necessário um “especialista de TI” p/ configurar o Stratix 8000
Copyright © 2012 Rockwell Automation, Inc. All rights reserved.
Otimização Simplificada
Ajuste correto p/ o dispositivo, em 2 Clicks, com Smartports
Smartports:•Ajustes pre-definidos p/ dispositivos comuns:•Otimiza trafego na rede
•Minimiza latencia
Copyright © 2012 Rockwell Automation, Inc. All rights reserved.
Maximiza Disponibilidade da Planta
Não requer PC, Set-up, Configuração
• Compact Flash armazena toda configuração e operação do sistema
• Apenas mova o cartão Compact Flash do switch em falha para o novo switch
Copyright © 2012 Rockwell Automation, Inc. All rights reserved.
DHCP – Persistência de endereço IP
172.20.3.1
172.20.3.2
172.20.3.3
Inversor Danificado
DHCP Server
172.20.3.1172.20.3.3
172.20.3.2
Inversor Reserva
DHCP Server
Copyright © 2011 Rockwell Automation, Inc. All rights reserved.
Simplifica Manutenção e Aumenta Disponibilidade da Planta (OEE)
É definido um endereço IP fixo para ser atribuido a cada porta
Copyright © 2012 Rockwell Automation, Inc. All rights reserved.
StratixTM 8000 - Ferramentas
Device Manager
Command Line Interface
Cisco Network Assistant
RSLogix, Add-on Profile
FactoryTalk View, Faceplates
Copyright © 2012 Rockwell Automation, Inc. All rights reserved.
Stratix 8300 – Layer 3
� Stratix 8300� Switch de nível 3: suporta roteamento entre Subredes e VLANs
� Construido com base nos serviços do Catalyst 3750 IP da CISCO e inclue todas as funcionalidades do Stratix 8000
� Suporta integração entre IT e as redes de chão de fábrica
� Compatível com outras plataformascorporativas da Cisco
� Duas opções de base com 10 ou 6 portas
� Mesmos módulos de expansão e SFPs do Stratix8000
VLAN 10 VLAN 20 VLAN 30
VLAN 100
Copyright © 2012 Rockwell Automation, Inc. All rights reserved.
Tecnologia de Switch Incorporado
Tecnologia que pode ajudar a:
� Reduzir numero de portas requeridas em switches Ethernet
� Simplificar a configuração da rede
� Reduzir necessidades de cabos
1756-EN2TR
Amor StartPOINT
Amor Block
Amor POINT
Copyright © 2012 Rockwell Automation, Inc. All rights reserved.
Tecnologia de Switch Incorporado
� Habilita topologias lineares e em anel com EtherNet/IP
� Tráfego é priorizado para garantir dados críticos.
� Sem necessiade de switches externos p/ redes isoladas
� Padrão aberto (ODVA) permite inclusão de produtos de terceiros.
� Tempo de recuperação do anel inferior a 3 ms
Linear
• Segmentos lineares aumentam o alcance da aplicação
• Não é preciso levar cabos de um switch centralizado a cadadispositivo
• Aumento de tolerância a falha(Resiliência)
• Sem hardware adicional, semswitches adicionais.
Anel
Copyright © 2012 Rockwell Automation, Inc. All rights reserved.
Produtos com Tecnologia de SwitchesIncorporados
� Disponível� ControlLogix EtherNet/IP module (1756-EN2TR)� Adaptador Point I/O (1734-AENTR)� Adaptador ArmorPoint (1738-AENTR)� ArmorBlock I/O (1732E-xxxxxxR)
� EtherNet/IP 3-port tap (1783-ETAP)� EtherNet/IP 3-port com 1 fibra (1783-ETAP1F)� EtherNet/IP 3-port com 2 fibra (1783-ETAP2F)� Kinetix 6500� CompactLogix 5370
2 Ethernet Ports
1783-ETAP
Copyright © 2012 Rockwell Automation, Inc. All rights reserved.
Resumo : Vantagens da EtherNet/IP
� Ethernet e protocolo TCP/IP Padrão
� Utiliza switches standard comerciais ou industriais p/ TODAS as funções
� Integra facilmente nas instalações Ethernet existentes e redescorporativas
� Não requer treinamento específico e/ou conhecimento do pessoal TI(mesmas ferramentas de configuração, manutenção e diagnóstico)
� Compatibilidade com o existente (Padrões IEEE e IETF)� Compatibilidade c/ o Futuro
� Simplicidade / Transparente
� Consolidada : Mais de 300 fornecedores / Mais de 4,5 Milhões de nós
� Aplicações MultiDisciplinares
� Controle Discreto, Controle de Processo, Batelada, Configuração,Informação e Diagnostico, Aplicações de Segurança, Sincronismo de Tempo
Copyright © 2012 Rockwell Automation, Inc. All rights reserved.
Material AdicionalODVA
� Website:� http://www.odva.org/
� Media Planning and Installation Manual� http://www.odva.org/Portals/0/Library/Publications_Numbered/PUB00148R0_EtherNetIP_Media_Planning_and_Installation_Manual.pdf
� Network Infrastructure for EtherNet/IP: Introduction and Considerations� http://www.odva.org/Portals/0/Library/Publications_Numbered/PUB00035R0_Infrastructure_Guide.pdf
� Device Level Ring � http://www.odva.org/Portals/0/Library/CIPConf_AGM2009/2009_CIP_Networks_Conference_Technical_Track_Intro_to_DLR_PPT.pdf
� The CIP Advantage� http://www.odva.org/default.aspx?tabid=54
53Fundamentals of EtherNet/IP Networking
Copyright © 2012 Rockwell Automation, Inc. All rights reserved.
Copyright © 2012 Rockwell Automation, Inc. All rights reserved.
Material AdicionalRockwell Automation
� Networks Website: http://www.ab.com/networks/
� EtherNet/IP Website: http://www.ab.com/networks/ethernet/
� Media Website: http://www.ab.com/networks/media/ethernet/
� Embedded Switch Technology Website:
http://www.ab.com/networks/switches/embedded.html
� Publications:� ENET-AP005-EN-P Embedded Switch Technology Manual � ENET-UM001G-EN-P EtherNet/IP Modules in Logix5000 Control Systems …. provides connection and packet rate specs for modules
� 1783-UM003 Stratix 8000 and Stratix 8300 Ethernet Managed Switches User Manual
� ENET-WP0022 Top 10 Recommendations for Plantwide EtherNet/IP Deployments
� ENET-RM002A-EN-P Ethernet Design Considerations Reference Manual � Network and Security Services Website:
� http://www.rockwellautomation.com/services/networks/
Copyright © 2012 Rockwell Automation, Inc. All rights reserved.
Additional MaterialCisco and Rockwell Automation Alliance
� Websites� http://www.ab.com/networks/architectures.html
� Design Guides� Converged Plantwide Ethernet (CPwE)
� Application Guides� Fiber Optic Infrastructure Application Guide
� Education Series� Whitepapers
� Top 10 Recommendations for Plantwide EtherNet/IP Deployments
� Securing Manufacturing Computer and Controller Assets
� Production Software within Manufacturing Reference Architectures
� Achieving Secure Remote Access to Plant Floor Applications and Data 55
Fundamentals of EtherNet/IP NetworkingCopyright © 2012 Rockwell Automation, Inc. All rights reserved.
Copyright © 2012 Rockwell Automation, Inc. All rights reserved.
Material AdicionalCisco and Rockwell Automation Alliance
� Education Series Webcasts
� The Trend - Network Technology and Cultural Convergence
� What every IT professional should know about Plant Floor Networking
� What every Plant Floor Controls Engineer should know about working with IT
� Industrial Ethernet: Introduction to Resiliency� Fundamentals of Secure Remote Accessfor Plant Floor Applications and Data
� Securing Architectures and Applicationsfor Network Convergence
� Convergence-Ready EtherNet/IP Solutions
� Available Online
� http://www.ab.com/networks/architectures.html56
Fundamentals of EtherNet/IP NetworkingCopyright © 2012 Rockwell Automation, Inc. All rights reserved.
Copyright © 2012 Rockwell Automation, Inc. All rights reserved.
www.rockwellautomation.com
Follow ROKAutomation on Facebook & Twitter.Connect with us on LinkedIn.
Obrigado !!!