FRIO - nordesign.no · Frio 3 Alternativ spredningsvinkel - 48º Art. nr. 520320048 Sand White Frio...
Transcript of FRIO - nordesign.no · Frio 3 Alternativ spredningsvinkel - 48º Art. nr. 520320048 Sand White Frio...
Tekn
iskT FRIO
2 www.nordesign.no
Frio
Innfelt lineær downlightserie med lav blendingMed sitt lineære og slanke design, passer denne serien perfekt i moderne rom i private boliger, så vel som i offentlige rom som kontorer, fellesrom på hotell etc.
Leveres standard med 30º spredning, som vil dekke de fleste behov, men har mulighet til å bytte til en mer bredtstrålende reflektor (48º). Kommer i fargetemperaturene 2700K og 3000K og er dimbar avhengig av valgt strømforsyning.
3www.nordesign.no
Lav b lendingsgradUGR <16
Opplev lyset - uten å se lysetMed sin smale konstruksjon som består av individuelle optiske moduler, gir den jevn belysning og lav blending.
4 www.nordesign.no
Sand Black
Art. nr.190322706
Kelvin2700
Lumen470
CRI>90
IP20
Watt3 x 2
190323006 3000524 >90 203 x 2190322705 2700470 >90 203 x 2190323005 3000524 >90 203 x 2
Spredning30º30º30º30º
FargeSand white (RAL9003)Sand white (RAL9003)Sand black (RAL9005)Sand black (RAL9005)
Frio 3
Alternativ spredningsvinkel - 48ºArt. nr. 520320048
Sand WhiteFrio 3
Art. nr.
307000018
Min. antall armaturer pr driver
2 stk.300400700 4 stk.HE8030-A 2 stk.HED2040(9803) 2 stk.
Dimbar
Fase avsnittFase avsnittSwitch-dim + 1-10VDALI + Switch-dim + 1-10V
Volt: 8,9V DCNB! Valg av strømforsyning er avhengig av Volt.
NB! Kobles i serie.
Maks. antall armaturer pr driver
2 stk.6 stk.4 stk.6 stk.
Se side 7 for detaljert beskrivelse av strømforsyningene.
2700K 3000K 2700K 3000K
2
1532 47 44
90
Frio 3
UGR<16<16<16<16
30º 48º
307907009 1 stk.Fase avsnitt 1 stk.
Ledning med JST pluggAlle modellene leveres med 23cm ledning m/ JST plugg.
I tillegg er det inkl. 17cm ledning m/ plugg og avmantlet ende.
5
5www.nordesign.no
Sand Black
Art. nr.190522706
Kelvin2700
Lumen820
CRI>90
IP20
Watt5 x 2
190523006 3000910 >90 205 x 2190522705 2700820 >90 205 x 2190523005 3000910 >90 205 x 2
Spredning30º30º30º30º
FargeSand white (RAL9003)Sand white (RAL9003)Sand black (RAL9005)Sand black (RAL9005)
Frio 5
Alternativ spredningsvinkel - 48ºArt. nr. 520520048
Sand WhiteFrio 5
Art. nr.307000018
Min. antall armaturer pr driver1 stk.
300400700 1 stk.HE8030-A 1 stk.HED2040(9803) 1 stk.
DimbarFase avsnittFase avsnittSwitch-dim + 1-10VDALI + Switch-dim + 1-10V
Volt: 14,9V DCNB! Valg av strømforsyning er avhengig av Volt.
NB! Kobles i serie.
Maks. antall armaturer pr driver1 stk. 3 stk.3 stk.3 stk.
Se side 7 for detaljert beskrivelse av strømforsyningene.
2700K 3000K 2700K 3000K
32
2
52 52 44
137
Frio 5
UGR<16<16<16<16
30º 48º
Ledning med JST pluggAlle modellene leveres med 23cm ledning m/ JST plugg.
I tillegg er det inkl. 17cm ledning m/ plugg og avmantlet ende.
6 www.nordesign.no 7
7www.nordesign.no
AcTec LED driver 18W/700mA (13-26V)Art. nr.
307000018
El. nr.
45 120
28
Dimbar fase avsnitt
Nordesign LED driver 9W/700mA (7-13V)Art. nr.
307907009
El. nr.
6631977
Dimbar fase avsnitt
Hytronik DALI LED driver 40W/700mA (12-58V)Art. nr.
HED2040(9803)
El. nr.
Dimbar DALI + Switch-dim + 1-10V
Hytronik LED driver 30W/700mA (12-43V)Art. nr.
HE8030-A
El. nr.
6632225
Switch-dim + 1-10V
INSTRUCTION MANUAL FOR 30W DIMMABLE LED DRIVERMODEL NO.: HE8030-A
The current can be easily configured by choosing the correct combination of the DIP switches (see table below).
LED CURRENT SELECTIONWIRING DIAGRAMSwitch-DIM wiring diagram
Note: 1. Default setting is “1-10V” dimming. 2. This “1-10V” output is isolated, SELV output. 3. To shift dimming from “Switch-Dim” to “1-10V”, the 1-10V leads should be short-circuit for at least 3s.
Up to 50 drivers can be connected to the same switch, thanks to the programme. This means there is no need for any additional synchrony wire in large installation, where many drivers should be controlled by one switch.Please follow the steps below to achieve synchronization function if more than one driver is connected to the same push button: Press the push button for more than 1s (long push), then a short push (<1s). Now the devices are switched off. Long push the button, the system is now synchronized.
SPECIFICATION
SWITCH-DIMpush and hold to dim On/off control: short push (<1s) on the switch.
Note: Short push should be at least 0.12s, and the time interval between two pushes should be longer than 0.12s also.Stepless dimming: long push (>1s) on the switch.For fine tuning of light level: with every alternate long push, the light level goes to the opposite direction.Built-in permanent memory: light returns to the previous dimming level when switched off and on again,even after power failure.
SYNCHRONIZATION
With double terminals on the primary side, it is easy to connect many drivers in series, simply take the L, N, and switch-Dim. from the previous driver to the next driver.LOOP-IN, LOOP-OUT
Mains voltage 220-240VAC 50/60HzMains current 164-150mA Mains power 35W (Maximum)Power consumption Output voltage (U-out) 80V (Maximum)Power factor Operation temperature Ta: -20~+50℃ Tc:85℃(Maximum)
Efficiency 88%(Maximum)Dimming interface Push, 1-10VDimming range 1-100%, flicker-free Output short-circuit protection. Over-heat protection, Permanent memoryEMC standard EN55015, EN61547Safety standard EN61347-1, EN61347-2-13Dielectric strength
1-10V dimming wiring diagram
15W/250mA/12~60V; 21W/350mA/12~60V24W/400mA/12~60V; 27W/450mA/12~60V30W/500mA/12~60V; 30W/550mA/12~54V30W/600mA/12~50V; 30W/700mA/12~43V
Max. output power/current/voltage
Switch Dim
N
L
LED
1-10V
DIP switch (for LED current selection)
+-+-
Switch DimSwitch Dim
LED+-Switch Dim
HE8030-ANNL
LN
L
Switch Dim LED+-Switch Dim
HE8030-ANNLL
n*Driver
LN
LED +-
1-10V+-HE8030-A
NNLL
LED +-
1-10V+-HE8030-A
NNLL
n*Driver
1-10V+-
Current700mA600mA550mA500mA450mA400mA350mA250mA
1 2 3
Abnormal protection
In the case of overload, overheat, or poor electrical contact, drivers can get overheated. Instead of shutting down, this smart driver automatically reduces power output by 20% to reduce the thermal load, and further 20% more... until the thermal condition is at a safe level for the driver to work in a stable condition.As the driver cools, the light output goes back to 100%.
INTELLIGENT THERMAL MANAGEMENT
HE8030-A-20170608-A2
HE8030-A
3rd Floor, block C, complex building, 155#, Bai'gang road south, Bai'gang village, Xiao Jin Kou town, Huicheng district, Huizhou 516023Tel:86-752-2772020 F:86-752-2777877E: [email protected] W:www.hytronik.com
CHINA FACTORYRoom D, 10/f, Tower A, Billion Center, 1 wang Kwong Road, Kowloon Bay, Kowloon, HongkongT: 00852-35197525 F: 00852-30116936E: [email protected]
HYTRONIK INDUSTRIAL LIMITED
INSTRUCTION MANUAL FOR 30W DIMMABLE LED DRIVERMODEL NO.: HE8030-A
The current can be easily configured by choosing the correct combination of the DIP switches (see table below).
LED CURRENT SELECTIONWIRING DIAGRAMSwitch-DIM wiring diagram
Note: 1. Default setting is “1-10V” dimming. 2. This “1-10V” output is isolated, SELV output. 3. To shift dimming from “Switch-Dim” to “1-10V”, the 1-10V leads should be short-circuit for at least 3s.
Up to 50 drivers can be connected to the same switch, thanks to the programme. This means there is no need for any additional synchrony wire in large installation, where many drivers should be controlled by one switch.Please follow the steps below to achieve synchronization function if more than one driver is connected to the same push button: Press the push button for more than 1s (long push), then a short push (<1s). Now the devices are switched off. Long push the button, the system is now synchronized.
SPECIFICATION
SWITCH-DIMpush and hold to dim On/off control: short push (<1s) on the switch.
Note: Short push should be at least 0.12s, and the time interval between two pushes should be longer than 0.12s also.Stepless dimming: long push (>1s) on the switch.For fine tuning of light level: with every alternate long push, the light level goes to the opposite direction.Built-in permanent memory: light returns to the previous dimming level when switched off and on again,even after power failure.
SYNCHRONIZATION
With double terminals on the primary side, it is easy to connect many drivers in series, simply take the L, N, and switch-Dim. from the previous driver to the next driver.LOOP-IN, LOOP-OUT
Mains voltage 220-240VAC 50/60HzMains current 164-150mA Mains power 35W (Maximum)Power consumption Output voltage (U-out) 80V (Maximum)Power factor Operation temperature Ta: -20~+50℃ Tc:85℃(Maximum)
Efficiency 88%(Maximum)Dimming interface Push, 1-10VDimming range 1-100%, flicker-free Output short-circuit protection. Over-heat protection, Permanent memoryEMC standard EN55015, EN61547Safety standard EN61347-1, EN61347-2-13Dielectric strength
1-10V dimming wiring diagram
15W/250mA/12~60V; 21W/350mA/12~60V24W/400mA/12~60V; 27W/450mA/12~60V30W/500mA/12~60V; 30W/550mA/12~54V30W/600mA/12~50V; 30W/700mA/12~43V
Max. output power/current/voltage
Switch Dim
N
L
LED
1-10V
DIP switch (for LED current selection)
+-+-
Switch DimSwitch Dim
LED+-Switch Dim
HE8030-ANNL
LN
L
Switch Dim LED+-Switch Dim
HE8030-ANNLL
n*Driver
LN
LED +-
1-10V+-HE8030-A
NNLL
LED +-
1-10V+-HE8030-A
NNLL
n*Driver
1-10V+-
Current700mA600mA550mA500mA450mA400mA350mA250mA
1 2 3
Abnormal protection
In the case of overload, overheat, or poor electrical contact, drivers can get overheated. Instead of shutting down, this smart driver automatically reduces power output by 20% to reduce the thermal load, and further 20% more... until the thermal condition is at a safe level for the driver to work in a stable condition.As the driver cools, the light output goes back to 100%.
INTELLIGENT THERMAL MANAGEMENT
HE8030-A-20170608-A2
HE8030-A
3rd Floor, block C, complex building, 155#, Bai'gang road south, Bai'gang village, Xiao Jin Kou town, Huicheng district, Huizhou 516023Tel:86-752-2772020 F:86-752-2777877E: [email protected] W:www.hytronik.com
CHINA FACTORYRoom D, 10/f, Tower A, Billion Center, 1 wang Kwong Road, Kowloon Bay, Kowloon, HongkongT: 00852-35197525 F: 00852-30116936E: [email protected]
HYTRONIK INDUSTRIAL LIMITED
Strømforsyninger
AcTec LED driver 40W/700mA (28-56V)Art. nr.
300400700
El. nr.
Dimbar fase avsnitt
166
5224
112
22
22
40
NB! Benytt polaritetsvenderArt. nr. 530050020
TLF: 73 84 95 50 / WWW.NORDESIGN.NO
Hovedkontor, lager og showroom TrondheimGranåsvegen 7, 7069 TRONDHEIM
Showroom BergenHagerupsvei 99, 5067 BERGEN
Showroom OsloDrammensveien 130A4, 0277 OSLO