Forged Products Rudder Stock - von Schaewen
2
Product Reference Forged Products Rudder Stock
Transcript of Forged Products Rudder Stock - von Schaewen
Product Reference
Forged Products
Rudder Stock
ameca von Schaewen GmbHStrickerstr. 31 · 45329 Essen
SSK von Schaewen Hückeswagen GmbHStahlschidtsbrücke 20 · 42499 Hückeswagen
SSK von Schaewen Wetter GmbHRuhrstr. 21 · 58300 Wetter
von Schaewen Polska Sp. z o.o.ul. Wojska Polskiego 84E · PL-41-600 Swietochlowice
Kronprinzenstraße 1445128 Essen Tel. +49 201/81 10-180Fax +49 201/81 10-174
von Schaewen AG
These rudder stocks are employed on ships of more than approx. 6,000 tons displacement and a length up to 140 meters. By means of the rudder stock, which is supported in a rudder trunk, the control movement is transferred to the rudder blade.
The special feature of this order is in the component geometry. The offset stocks have already been forged conically. This improves the mechanical properties of the material in the area of the transitions, as well as on the cone surface, and simultaneously results in savings in material and thus costs.
As a result of our wide-ranging product and service spectrum, from forging, through heat treatment and acceptance through a classification society, extending to the mechanical processing, the order could be implemented from a single source to the fullest satisfaction of the customer.
Forged Products
Rudder Stock
Product Reference
Specification stepped shaftforgedpre-turnedUS-testedheat treatedMTC DIN EN 10204/3.2
End Use propulsion unit
Steel Grade 42CrMo4
Dimension max. diameter 655 mm, total length 5,120 mm
Weight 11.3 to (raw)
