FIRE FIGHTING SYSTEM
-
Upload
picontrol-co-inproindustriales -
Category
Documents
-
view
275 -
download
9
description
Transcript of FIRE FIGHTING SYSTEM
SISTEMA DE CONTROL E INSTRUMENTACION SISTEMA DETECCION DE GASES
SISTEMA DE AIRE ACONDICIONADO SISTEMA CONTRAINCENDIO
SISTEMA DE MONITOREO DE VIBRACIONES SISTEMAS AUXILIARES
SISTEMA DE PESAJE SISTEMA DE SEGURIDAD
INVERSIONES Y PROYECTOS INDUSTRIALES - Bogotá: 300 6000228 - Medellín: 300 7500033 - [email protected]
GRUPO DE PROYECTOS ESPECIALES
INVERSIONES Y PROYECTOS INDUSTRIALES Bogotá: 300 6000228 - Medellín: 300 7500033 [email protected]
Fire Protection
For PeoPle anD ProPerty
Kidde Fire Systems and SmartOne are registered trademarks of Kidde-Fenwal, Inc.Kidde Sentinel™, KVS™, Kidde IND™ and Kidde WHDR™ are trademarks of Kidde-Fenwal, Inc.FM-200® is a registered trademark of DuPont.June 2012 ©Kidde-Fenwal, Inc. All Rights Reserved
KF-0078
INVERSIONES Y PROYECTOS INDUSTRIALES - Bogotá: 300 6000228 - Medellín: 300 7500033 - [email protected]
smart choice
Kidde® Fire Systems’ products save people and property from the dangers of fire. Our broad product offering and design expertise have been protecting assets worldwide for more than 90 years. We’re the smart choice when early fire detection and suppression needs are especially demanding. From refineries to mining vehicles… it’s likely that Kidde is on the job.
Kidde products and services set the benchmark for fire detection and suppression. We are devoted to protecting people and property from everyday hazards. People trust us to do that because we are experts in our field. And that trust is reinforced by the quality we instill in everything we do—from manufacturing fire and safety systems to providing system design and technical support.
Customers around the world have relied on Kidde to deliver superior fire detection and suppression products and services. Today, Kidde is the world’s largest manufacturer of fire safety products and a leader in special hazard fire protection system solutions. The Kidde portfolio of products include the largest suppression agent portfolio in the industry, a full line of detection and control products and a variety of ancillary products, such as notification devices and fire extinguishers. Our global network of “Authorized Distributors” are available to assist you with everything from hazard analysis to system maintenance. When you choose Kidde, you’ve chosen the world’s mostrespected name in fire protection.
A division of United Technologies Corporation, Kidde enjoys the benefits of being part of an extensive family of world-class companies with a long history of quality and innovation. With many thousands of dedicated employees located across the globe, we are committed to delivering products and services that help keep people and property safe worldwide.
✔
When you choose Kidde,
you’ve chosen the world’s most
respected name in fire protection.
ECS clean agent
INVERSIONES Y PROYECTOS INDUSTRIALES - Bogotá: 300 6000228 - Medellín: 300 7500033 - [email protected]
www.kiddefiresystems.com
oUr ProDUcts
Kidde Fire systems markets a range of
products to suit every fire protection
challenge; commercial, industrial and
institutional. each application requires
study and careful consideration of
unique demands for product
performance.
Unlike structural fire protection in which conventional methods, such as smoke detectors, manual fire alarms, water sprinklers and smoke control systems are used, every special hazard has its own unique set of requirements. the method for protecting a museum is very different than the approach used to detect and suppress a fire in the engine compartment of a 400 ton haul truck used in the mining industry.
Kidde offers a unique approach to fire protection for these special hazards—integrated total system solutions. Kidde offers a complete fire protection package that starts with early fire detection and ends with quick fire suppression. the detection systems are on-guard 24-hours a day. When a fire is detected, sophisticated control equipment is deployed to take specific actions like turning off power to sensitive equipment, redirecting or turning off ventilation, notifying personnel and releasing a wide variety of application specific fire suppression agents. From wet chemical to our full line of ecs clean agent solutions, Kidde has your needs covered.
INVERSIONES Y PROYECTOS INDUSTRIALES - Bogotá: 300 6000228 - Medellín: 300 7500033 - [email protected]
Asset Hazard AnalysisFrom an engine room to commercial kitchen, our global network of distributors have the right experience and tools to conduct a professional analysis of your assets and processes to develop the most appropriate fire protection solution.
System Design and Technical SupportKidde distributors are trained to design custom fire protection solutions using proprietary Kidde software that meet applicable codes and standards. Kidde provides an Applications Engineering team to assist our distributors with system design whenever necessary.
InsallationKidde distributors provide timely installation of Kidde detection, control and suppression systems. By being flexible to your needs, our distributors will complete their work with the least possible interruption to your business operations.
Maintenance and Emergency ServicesKidde distributors offer the full spectrum of important post-installation services, ranging from code-compliant testing and maintenance to 24-hour emergency service.
the ValUe oF ProFessional DistriBUtionthe global network of “Kidde
authorized” Fire Protection
Distributors possess the
knowledge and qualifications
required to be known as
“professionals” in the fire
protection industry. all
authorized Kidde Distributors
are factory-certified in the
design, installation and
maintenance of Kidde
products. this ensures that
they are knowledgeable
about codes and standards
in all the markets we serve.
as a result, the system you
get is the most economical
and viable solution to
satisfy your fire protection
requirements. the Kidde
network of authorized
Distributors offers the
following services:
INVERSIONES Y PROYECTOS INDUSTRIALES - Bogotá: 300 6000228 - Medellín: 300 7500033 - [email protected]
Kidde Fire Systems, the world leader in fire
protection, has a wide range of proven technologies
to serve the diverse needs of virtually every
industry. Our products, combined with our highly
skilled, worldwide installation and service network,
allow us to provide you with a total system solution
to solve your specific fire protection needs.
The depth of our experience and the breadth of
our solution capabilities can benefit most industries.
While we encourage you to contact us regardless of
your needs, we have developed products and services
that are particularly aligned to the special equipment
listings and applications of the following industries:
Commercial Cooking
Communication
Data Processing
Heritage Preservation
Manufacturing
Marine
Mining
Oil and Gas
Power Generation
Steel
inDUstries We Protect
www.kiddefiresystems.com
INVERSIONES Y PROYECTOS INDUSTRIALES - Bogotá: 300 6000228 - Medellín: 300 7500033 - [email protected]
www.kiddefiresystems.com
ProDUct PortFolio
ControlsThe “brain” for your fire protection system. Available in a range of conventional and addressable models, scalable to suit your needs.
Detection• Conventional/Intelligent Detection
Conventional or “SmartOne®” microprocessor-based analog detectors are available using ionization, photoelectric or thermal technologies.
• High-Sensitivity Smoke Detection Laser-based high-sensitivity aspirating smoke detection systems.
• Special Hazard and Overheat Detection Addressable linear heat detectors for detection of fire and overheating conditions in industrial applications.
Clean Agent SystemsGaseous fire suppression systems that suppress fires quickly without harming equipment, the facility, inhabitants or the environment.
Kidde Vehicle SystemsThe Kidde Sentinel™ System and the legacy KVS™ System are used to protect large industrial vehicles.
Dry Chemical SystemsKidde IND™ Systems are used for a variety of industrial processes.
Kidde Marine SystemsKidde offers a variety of systems designed specifically for the unique requirements of the marine market.
Wet Chemical SystemKidde WHDR™ System provides 24-Hour automatic or manual protection for commercial cooking areas; ducts, plenums, hoods and cooking surfaces
Mil-Spec SystemsKidde military specification HFP (FM-200®), Halon 1301 and Carbon Dioxide systems are tested and built to meet all applicable naval requirements including shock and vibration.
PortablesThe Badger family of portable extinguishers is perfect for all your commercial and industrial needs.
INVERSIONES Y PROYECTOS INDUSTRIALES - Bogotá: 300 6000228 - Medellín: 300 7500033 - [email protected]
Custom Engine Driven Pumping UnitsHale Products Inc. has been manufacturing skid and trailer pumping units since its beginning over 90 years ago. The units available today span a wide range of applications from Marine units to Industrial Trailers. Hale can build a wide variety of water and foam pumping units to meet the needs of municipal, government, and industrial customers.
If you have not found what you need in the standard skid, trailer, and marine price lists, the custom units below will give you an idea of our capability. These are units that have shipped recently to locations all over the world. Contact Hale with your pumping unit requirements.
A selection graph below shows the the most popular Hale pump and engine combinations. Other combinations are also available including high pressure units. The FP units meet NFPA 1901 pump requirements while the SP units meet the requirements of NFPA 1925. Many other models are also available.
Desert duty cooling system on heavy duty 8000 lb. hydraulic surge brake trailer with two 5/16 ball couplings and four jack stands with 100 gallon integral fuel tank.
Suction and discharge hose storage provided.Single 6 inch NH inlet connectionDual 4-inch NH discharge valves with relief valves and handwheel actuators with position indicators and 5 inch Storz angle adapters.John Deere 6068T Turbo diesel engine Class 1 ENFO IVMultiple units built for Gulf Coast fire department
•••
•••
IP2000DJ-THD Custom Trailer Unit2000 GPM @ 90 PSI1250 GPM @ 150 PSI
Part Number 545-3760-23-0
INVERSIONES Y PROYECTOS INDUSTRIALES - Bogotá: 300 6000228 - Medellín: 300 7500033 - [email protected]
FP1500 DJ-THD Custom Trailer Unit500 GPM NFPA 1901
Desert duty cooling system on heavy duty 8000 pound hydraulic surge brake trailer with Pintle eye coupling and four jack stands.
100 gallon integral fuel tank.Single 6-inch NH Inlet with loose 5.5 BR adapter(6) 2.5 NH Discharge Valves. Suction and discharge hose storage provided.PG35 relief valve and controlJohn Deere 6068H diesel powerplant with Class 1 Enfo IVMultiple units built for Middle Eastern Oil Co.
•••••••
Part Number 545-3760-22-0
500 GPM NFPA 1901
Desert duty cooling system on heavy duty 6000 lb. hydraulic surge brake trailer with Pintle eye coupling and four jack stands.
100 gallon integral fuel tank. Suction and discharge hose storage provided.Single 5-inch NH intake with adapter for BR thread.(2) 2.5-inch NH discharge valves.P30V relief valve system.John Deere 4045T diesel engine with gages.Multiple units built for off-shore oil company.
•••••••
FP500DJ-THD Custom Trailer Unit
Part Number 545-3720-22-0
HP700 DI-TL Pumping Unit500 GPM NFPA 1901 Rated
HP 700 pumping unit is supplied on a compact trailer with rear facing controls. Gross weight with fuel and ready to run is less than 3100 pounds. Trailer has pintle eye and running lights, not DOT rated. P Series relief valve is an extra cost option on this unit.Single 5 inch NH Intake(3) 2.5 Inch NH Discharge ValvesClass 1 ENFO IV engine data display and electric toggle switch throttle.IVECO Motors 2.3 liter HPI power plantUnit built for domestic state fire school
Part Number 545-6071-80-0
•
•••••
INVERSIONES Y PROYECTOS INDUSTRIALES - Bogotá: 300 6000228 - Medellín: 300 7500033 - [email protected]
HP700 DI-M Enclosed Cross Chassis Industrial Unit500 GPM NFPA Rated700 GPM @ 100 PSI
Custom diesel powered pumping unit comes complete with two driver’s side discharges and one officer’s side discharge valve. Three inch tank-to-pump valve and 1.5 inch tank fill make this unit ready to install and run.
Relief valve and Class 1 ENFO IV engine instrumentation included on an open industrial panel as well as line gages.Stainless steel intake manifold with Class 1 intake relief valve IVECO Motors 2.3 liter HPI power plant
•
•
•
FP3000 DI-M Custom Enclosed Pumping Unit
This industrial skid pumping unit has an integral 100 gallon fuel cell built into its base and extra reserve power with an IVECO Motors 493 hp diesel power plant.
A Class 1 automatic pump pressure controller controls this power.Pump is bronze fitted cast iron and manifold is stainless steel welded construction.Pump was built for a US based industrial fire fighting contractor for heavy duty use in different environments.Dual primers allow fast priming of the three six-inch inlet hoses. TRV protects pump from overheating.
••
•
•
3000 GPM NFPA Ratable
SP2000DJ-EC Cast Iron
John Deere 6081HF070 diesel engine with Class 1 Enfo IV engine data display. This is same as standard SP2000 with Class 1 Pump Pressure Governor IPO standard relief valve.
12 VDC electrical system and dual primers with single PVG.Standard exhaust and base 100 gallon fuel tank. Dry weight approximately 4000 lbs.8-inch ASA inlet x 6-inch ASA outletUnit built for fire school hydrant system in Canada
•••••
2000 GPM @ 150 PSI
Part Number 545-6052-60-1
INVERSIONES Y PROYECTOS INDUSTRIALES - Bogotá: 300 6000228 - Medellín: 300 7500033 - [email protected]
Iveco Motors Marine Powerplant enclosed on a 100 gallon fuel tank with a 1250 gpm pump and custom discharge arrangement. Dual 4 inch valves and Dual Oil-less ESP primers are mounted on the pump end. Single six inch Vic intake connection.Controls include Class1 Automatic Pump Pressure Governor, ENFO IV digital engine gages and Automatic Start and Prime system that provides unit start and priming from a single push button.System built for or high volume water supply and tanker filling for a North American Fire Department located on a lake.
•
•••
•
SPM1250 DI-EC Custom Enclosed Marine Pumping Unit1250 GPM @ 150 PSI
(Remote Muffler Kit Available)
All Hale Pumping units are available as trailer units. The trailers all have integral fuel tanks and stabilization jacks. There are additional options, such as scene lights and hose racks available as part of a custom order.
Contact Hale Customer Service for lead-time and additional custom unit availability.
Note: Hale reserves the right to make improvements in design and materials and changes in price without notice.
T Y P I C A L D O T R AT E D TA N D E M A X L E T R A I L E R
INVERSIONES Y PROYECTOS INDUSTRIALES - Bogotá: 300 6000228 - Medellín: 300 7500033 - [email protected]
FIRE PUMP ENGINES
MODELSJU6H-UFD0 JU6H-UF34 JU6H-UFABL2 JU6H-UF58 JU6H-UFAB76 JU6H-UFAAQ8JU6H-UFD2 JU6H-UFG8 JU6G-UFM8 JU6H-UF50 JU6H-UF68 JU6H-UFAAPGJU6H-UF30 JU6H-UFABL8 JU6H-UFM0 JU6H-UF52 JU6H-UF60 JU6H-UFAARGJU6H-UF32 JU6H-UFABL0 JU6H-UFM2 JU6H-UF54 JU6H-UF62 JU6H-UF84
USA Purchased – Installed Outside the USA
®
JU6H-UFAAS0
FM-UL-cUL APPROVED RATINGS BHP/KWJU6H
MODEL
RATED SPEED1470 1760 2100 2350 2600 2800 3000
UFD0 110 82 144 107 148 110UFD2 148 110 148 110UF30 94 70 140 104 160 119 160 119UF32 160 119 160 119UF34 160 119 175 131UFG8 130 97 149 111UFABL8 136 101 173 129UFABL0 173 129 173 129 173 129UFABL2 173 129 173 129UFM8 136 101 175 131UFM0 175 131 207 154 200 149UFM2 200 149 200 149UF58 138 103 183 137UF50 183 137 210 157 210 157UF68 175 131 200 149UF52 210 157 210 157UF54 216 161 216 161UFAAPG 220 164
UFAB76 225 168UFAAQ8 227 169UF60 200 149 240 179 240 179UF62 240 179 240 179UFAARG 252 188UF84 259 193 275 205UFAAS0 260 194
SPECIFICATIONS
ITEMJU6H MODELS
D0 D2 30 32 34 G8 ABL8 ABL0 ABL2 M8 M0 M2 58 50 52 54 AB76 68 60 62 AAQ8 PG AARG/S0 84Number of Cylinders 6
Aspiration T TRWA
Rotation* CWRotation CW
Weight – lb (kg) 1657 (750) 1693 (766)
Compression Ratio 17.0:1
Displacement – cu. in. (l) 414 (6.8)
Engine Type 4 Stroke Cycle – Inline Construction
Bore & Stroke – in. (mm) 4.19 x 5.00 (106 x 127)
Installation Drawing D536
Wiring Diagram AC C07591
Wiring Diagram DC C07575
Abbreviations: CW – Clockwise T – Turbocharged TRWA – Turbocharged with Raw Water Aftercooling*Rotation viewed from Heat Exchanger / Front of engine
Wiring Diagram DC C07575
Engine Series John Deere 6068 Series
CERTIFIED POWER RATING
• Each engine is factory tested to verify power and performance.
• Although FM-UL ratings are shown at specific speeds, Clarke engines can be applied at any intermediate speed. To determine the intermediate speed power; make a linear interpolation from the Clarke FM-UL power curve
ENGINE RATINGS BASELINES
• Engines are to be used for stationary emergency standby fire pump service only. Engines are to be tested in accordance with NFPA 25.
• Engines are rated at standard SAE conditions of 29.61 in. (752.1 mm) Hg barometer and 77°F (25°C) inlet air temperature [approximates 300 ft. (91.4 m) above sea level] by the testing laboratory (see SAE Standard J 1349)
FM
power; make a linear interpolation from the Clarke FM-UL power curve. Contact Clarke or your Pump OEM Representative to obtain details.
testing laboratory (see SAE Standard J 1349).
• A deduction of 3 percent from engine horsepower rating at standard SAE conditions shall be made for diesel engines for each 1000 ft. (305 m) altitude above 300 ft. (91.4 m)
• A deduction of 1 percent from engine horsepower rating as corrected to standard SAE conditions shall be made for diesel engines for every 10°F (5.6°C) above 77°F (25°C) ambient temperature.
INVERSIONES Y PROYECTOS INDUSTRIALES - Bogotá: 300 6000228 - Medellín: 300 7500033 - [email protected]
ENGINE EQUIPMENT
FIRE PUMP ENGINES
MODELS®JU6H-UFD0 JU6H-UF34 JU6H-UFABL2 JU6H-UF58 JU6H-UFAB76 JU6H-UFAAQ8JU6H-UFD2 JU6H-UFG8 JU6G-UFM8 JU6H-UF50 JU6H-UF68 JU6H-UFAAPGJU6H-UF30 JU6H-UFABL8 JU6H-UFM0 JU6H-UF52 JU6H-UF60 JU6H-UFAARGJU6H-UF32 JU6H-UFABL0 JU6H-UFM2 JU6H-UF54 JU6H-UF62 JU6H-UF84 JU6H-UFAAS0
EQUIPMENT STANDARD OPTIONAL
Air Cleaner Direct Mounted, Washable, Indoor Service with Drip Shield Disposable, Drip Proof, Indoor Service Outdoor Type
Alternator 12V-DC, 42 Amps with Poly-Vee Belt and Guard 24V-DC, 40 Amps with Poly-Vee Belt and Guard
Exhaust Protection Metal Guards on Manifolds and Turbocharger
Coupling Bare Flywheel Listed Driveshaft and Guard, UFD0/D2/30/32/34 – CDS20-S1; UFG8/ABL8/ABL0/ABL2/M8/M0/M2/58/50/52/54/AB76/68/60/62/AAQ8/AARG/AAPG/84/S0 – CDS30-S1
Exhaust Flex Connection Stainless Steel Flex, 150# ANSI Flanged Connection, 5” Stainless Steel Flex, 150# ANSI Flanged Connection, 6”
Flywheel Housing SAE #3
Flywheel Power Take Off 11.5” SAE Industrial Flywheel Connection
Fuel Connections Fire Resistant, Flexible, USA Coast Guard Approved, Supply and Return Lines
Stainless Steel, Braided, cUL Listed, Supply and Return Lines
Fuel Filter Primary Filter with Priming Pump
Fuel Injection System Stanadyne Direct Injection
Engine Heater 120V-AC, 1500 Watt 240V-AC, 1500 Watt
Governor, Speed Constant Speed, Mechanical
Heat Exchanger Tube and Shell Type, 60 PSI (4 BAR), NPT(F) Connections
Instrument Panel English and Metric, Tachometer, Hourmeter, Water Temperature, Oil Pressure and Two (2) Voltmeters
Junction Box Integral with Instrument Panel; For DC Wiring Interconnection to Engine Controller
Lube Oil Cooler Engine Water Cooled, Plate Type
Lube Oil Filter Full Flow with By-Pass Valve
Lube Oil Pump Gear Driven, Gear Type
Manual Start Control On Instrument Panel with Control Position Warning LightManual Start Control On Instrument Panel with Control Position Warning Light
Overspeed Control Electronic with Reset and Test on Instrument Panel
Raw Water Solenoid Operation Automatic from Fire Pump Controller and from Engine Instrument Panel
Run – Stop Control On Instrument Panel with Control Position Warning Light
Run Solenoid 12V-DC Energized to Run 12V-DC Energized to Stop; 24V-DC Energized to Run; 24V-DC Energized to Stop
Starters Two (2) 12V-DC Two (2) 24V-DC
Throttle Control Adjustable Speed Control Tamper Proof Throttle Control Adjustable Speed Control, Tamper Proof
Water Pump Centrifugal Type, Poly-Vee Belt Drive with Guard
Abbreviations :DC – Direct Current, AC – Alternating Current, SAE – Society of Automotive Engineers, NPT(F) – National Pipe Tapered Thread (Female)
®
INVERSIONES Y PROYECTOS INDUSTRIALES - Bogotá: 300 6000228 - Medellín: 300 7500033 - [email protected]
STANDARD COVERAGE SPRINKLERQUICK REFERENCE GUIDE
This guide is intended for general reference only. Prior to the design, lay-out, and/or installation of any sprinkler system, please refer to Viking’s technical documentation and always consult with the AHJ. Please visit www.vikinggroupinc.com for the most current technical data and product specifications. All products must be installed in accordance with the manufacturer’s current installation instructions. Viking reserves the right to change product specifications at any
time without notice and without incurring obligation.
Light Hazard Only Sprinklers continued from page 3
December 2012
To order, add desired finish (f) and temperature (t) suffix to end of base part number.
Example 1 [base(f)(t)]VK530, Chrome, 155ºF
09679FB
{
Finish Suffixes (f)
Brass A
Chrome F
White-Poly M-/W
Black Poly M-/B
Black PTFE N
Wax Coated C
Poly w/Wax V-/W
ENT* JN
Temp Suffixes (t)
135°F A
155°F B
165°F C
175°F D
200°F / 205°F E
280°F /286°F G
360°F H
500°F L
Open Z
Light, Ordinary, and Extra Hazard
Recessed PendentDomed Concealed
PendentUpright Conventional
Stainless Steel Upright
Stainless Steel Recessed Pendent
5.6 K VK102 (p/n 10139)Temp Range 135-500°F
VK102-D (p/n 10139A-X)Temp Range 155-200°F
VK100 (p/n 12986)Temp Range 135-500°F
VK118 (p/n 10227)Temp Range 155-360°F
VK130 (p/n 05012B)Temp Range 155-500°F
VK132 (p/n 06483B) Temp Range 155-500°F
8.0 K VK202 (p/n 10142)Temp Range 155-500°F
VK202-D (p/n 10142A-X)Temp Range 155-200°F
VK200 (p/n 10141)Temp Range 155-500°F
VK120 (p/n 10228)Temp Range 155-360°F
11.2 K VK536 (p/n 07961)Temp Range 155-286°F
VK530 (p/n 09679)Temp Range 155-286°F
GB
GBGB
STANDARD RESPONSE
GBGB
GB
GBGB
Light Hazard Only
Recessed Pendent UprightHorizontal Sidewall
High Pressure Recessed Pendent
High Pressure Upright
High Pressure Horizontal Sidewall
2.8 K VK003 (p/n 10221)Temp Range 155-360°F
VK001 (p/n 10218)Temp Range 155-360°F
VK023 (p/n 09994)Temp Range 155-360°F
VK021 (p/n 09995)Temp Range 155-360°F
VK015 (p/n 09997)Temp Range 155-360°F
4.2 K VK004 (p/n 10222)Temp Range 155-360°F
VK002 (p/n 10219)Temp Range 155-360°F
5.6 K VK104 (p/n 10224)Temp Range 155-360°F
GB
GBGB
GB
STANDARD RESPONSE
GB
Vertical Sidewall
5.6 K VK106 (p/n 10226)GB
GB - Glass BulbFL - Fusible Link - Also available in fusible link version.
Additional Sprinklers
GB
GB
GB GB
(NOTE) The above photos are for illustrative purposes only and might not exactly match the sprinkler indicated. Always refer to the technical documentation on Viking’s web site for product dimensions and physical characteristics.
GBGB GB
GB - Glass BulbFL - Fusible Link - Also available in fusible link version.
(NOTE) The above photos are for illustrative purposes only and might not exactly match the sprinkler indicated. Always refer to the technical documentation on Viking’s web site for product dimensions and physical characteristics.
• Viking sprinklers are available from the factory with three wraps of PTFE tape applied to the threads at an additional charge. To order, add a “T” to the end of the part number. See list price book for pricing details.
• Many Viking sprinklers are offered in a “Cocoon” option, which includes the sprinkler, protective cap or clip, and two-piece escutcheon. The escutcheon’s adapter is threaded to the sprinkler and the entire unit is then protected by a plastic cap. Outer escutcheon rings are included in a separate box.
• Select 8.0 and 11.2 K factor sprinklers are available with ½ NPT thread size FOR REPLACEMENT ONLY.
• The maximum working pressure for high pressure sprinklers is 250 psi, unless otherwise indicated.
• Wax coatings are available on select standard response sprinklers up to and including 286°F. The standard finish is brass.
• Cover plates and escutcheons are sold separately. Sprinklers, escutcheons, and cover plates are available in custom colors at an additional charge. See pages F-8 and F-9 of Viking’s list price book for details
• Polyester and PTFE sprinklers are suitable for decorative applications and are UL Listed for corrosion resistance.
• Black PTFE sprinklers are also available with coated waterways and without glass bulbs.
• For corrosion resistance, Viking also offers several sprinklers that are UL Listed with Electroless Nickel PTFE (ENT) coating.
Mirage® is a registered trademark of The Viking Corporation
Example 2 [base(f)(t)]VK360, White, 175ºF
15591MD/W
{
Example 3 [base(f)(t)]VK464, Brass, 200ºF
13614AE
{{
* Please refer to the “Standard Response” tables on previous pages for additional sprinkler options.
* * * * *
Starting with the 1996 edition of NFPA 13, quick response type sprinklers are required to be used in all Light Hazard Occupancies, with exceptions for existing systems that have standard response sprinklers.
*Electroless Nickel PTFE
INVERSIONES Y PROYECTOS INDUSTRIALES - Bogotá: 300 6000228 - Medellín: 300 7500033 - [email protected]
December 2012
Light and Ordinary Hazard
STANDARD RESPONSE
Flush Style1
High Pressure Recessed Pendent
High Pressure Upright
High Pressure Horizontal Sidewall
5.6 K VK400 (p/n 06679B) VK122 (p/n 09992) VK124 (p/n 09993) VK116 (p/n 09849)
Light and Ordinary Hazard
Recessed PendentDomed Concealed
PendentFlat Concealed
PendentUpright
Horizontal Sidewall
Flat Concealed Horizontal Sidewall
2.8 K VK330 (p/n 13960)Temp Range 165-280°F
5.6 K VK302 (p/n 06662B)Temp Range 135-286°F
VK302-D (p/n 06662BA-X)Temp Range 155-200°F
VK462 (p/n 13503A)Temp Range 155-200°F
VK300 (p/n 12978)Temp Range 135-286°F
VK305 (p/n 12121)Temp Range 155-286°F
VK481 (p/n 17555A)Temp Range 165-220°F
8.0 K VK352 (p/n 06666B)Temp Range 155-286°F
VK352-D (p/n 06666BA-X)Temp Range 155-200°F
VK464 (p/n 13614A)Temp Range 155-200°F
VK350 (p/n 06665B)Temp Range 155-286°F
VK360 (p/n 15591)Temp Range 135-200°F
11.2 K VK377 (p/n 08337)Temp Range 155-286°F
VK469 (p/n 15764A)Temp Range 165-205°F
VK531 (p/n 10633)Temp Range 155-286°F
FL
GBGB
GB
GB
GBGBGB
GBGB
FL GB
GB
ConventionalFlush Style
Stainless Steel Upright/Pendent
Mirage® Concealed (non-ferrous)
Mirage® Concealed (high pressure)
Mirage® Concealed (adjustable)
5.6 K VK310 (p/n 06766B) VK402 (p/n 06702B) VK338 (p/n 14692) VK339 (p/n 14693)
VK462-MRI (p/n 15480A)
VK463 (p/n 13667A) VK462-ADJ (p/n 14918A,14919A)
8.0 K VK354 (p/n 06768B) VK464-MRI (p/n 13614A)
QUICK RESPONSE
www.vikinggroupinc.com
Light Hazard Only
Recessed PendentFlat Concealed
PendentMirage Adjustable
ConcealedUpright
Horizontal Sidewall
Vertical Sidewall
2.8 K VK329 (p/n 06718B)Temp Range 155-286°F
VK461 (p/n 13831A)Temp Range 155-200°F
VK461-ADJ (p/n 14927A, 14928A)Temp Range 155-200°F
VK325 (p/n 06717B)Temp Range 155-286°F
VK333 (p/n 10035)Temp Range 155-286°F
4.2 K VK331 (p/n 06720B)Temp Range 155-286°F
VK465 (p/n 14262)Temp Range 155-200°F
VK465-ADJ (p/n 14929, 14930)
Temp Range 155-200°F
VK327 (p/n 06719B)Temp Range 155-286°F
5.6 K VK306 (p/n 06727B)Temp Range 155-286°F
GB
GBGB
QUICK RESPONSE
GB
High Pressure Recessed Pendent
High Pressure Upright
High Pressure Horizontal Sidewall
2.8 K VK342 (p/n 12290) VK340 (p/n 12286) VK344 (p/n 12287)
GB GB
GB
Light and Ordinary HazardLight and Ordinary Hazard
GB GBFLGB
GB
GBFL GB GB
GBGB GB
GB - Glass BulbFL - Fusible Link - Also available in fusible link version.
Additional Sprinklers
Additional Sprinklers
GB
GB GB
FL
(NOTE) The above photos are for illustrative purposes only and might not exactly match the sprinkler indicated. Always refer to the technical documentation on Viking’s web site for product dimensions and physical characteristics.
GB
GB
GB
GB - Glass BulbFL - Fusible Link - Also available in fusible link version.
(NOTE) The above photos are for illustrative purposes only and might not exactly match the sprinkler indicated. Always refer to the technical documentation on Viking’s web site for product dimensions and physical characteristics.
Flat Cover Plate – Pendent(VK461, VK462, VK463, VK464, VK465)Standard diameter (2-3/4”) – base part number 13504Large diameter (3-1/4”) – base part number 13642Square cover plate – base part number 15394
Flat Cover Plate – Pendent (ELO)(VK469, VK632 EC, VK538 EC)Large diameter (3-1/4”) – base part number 15765
Flat Cover Plate – Sidewall (VK408)Base part number 11451
Domed Cover Plate(VK102-D, VK202-D, VK302-D, VK352-D)Base part number 12381
Escutcheons (recessed pendent sprinklers)½” slip-on (2 piece) – base part number 06419 ¾” slip-on (2 piece) – base part number 06420
½” threaded (2 piece) – base part number 11038 ¾” threaded (2 piece) – base part number 11625
½” std flat escutcheon – base part number 02960 ¾” std flat escutcheon – base part number 05464
Ceiling rings for VK400/VK402 flush pendents sold separately. See Viking list price book for details.
* See back panel for available temperature and finishes, and corresponding part number suffixes
Select Sprinkler Wrenches
Part # 10896W/B
Use with all frame-style sprinklers and spray nozzles
Part # 16036W/B
Use with recessed pendent sprinklers with protective caps
Part # 13577W/B
Use with domed concealed pendent, wax coated, and recessed pendent sprinklers with protective shields
Part # 13655W/B
Use with recessed HSW sprinklers with protective shields and domed
concealed HSW sprinklers
Part # 14047W/B
Use with Mirage commercial concealed pendent sprinklers
Part # 14031
Use with Mirage commercial concealed pendent sprinklers
Heavy Duty
Light Duty
* Please refer to the “Light, Ordinary, and Extra Hazard” table on page 1 for additional sprinkler options.
High Pressure Recessed Pendent
High Pressure Upright
High Pressure Horizontal Sidewall
5.6 K VK 317 (p/n 12282) VK315 (p/n 12281) VK319 (p/n 12285)GBGBGB
* Please refer to the “Quick Response” table on the preceding page for additional sprinkler options.
* * * **
GB
INVERSIONES Y PROYECTOS INDUSTRIALES - Bogotá: 300 6000228 - Medellín: 300 7500033 - [email protected]
Light and Ordinary Hazard
STANDARD RESPONSE
Flush Style1
High Pressure Recessed Pendent
High Pressure Upright
High Pressure Horizontal Sidewall
5.6 K VK400 (p/n 06679B) VK122 (p/n 09992) VK124 (p/n 09993) VK116 (p/n 09849)
Light and Ordinary Hazard
Recessed PendentDomed Concealed
PendentFlat Concealed
PendentUpright
Horizontal Sidewall
Flat Concealed Horizontal Sidewall
2.8 K VK330 (p/n 13960)Temp Range 165-280°F
5.6 K VK302 (p/n 06662B)Temp Range 135-286°F
VK302-D (p/n 06662BA-X)Temp Range 155-200°F
VK462 (p/n 13503A)Temp Range 155-200°F
VK300 (p/n 12978)Temp Range 135-286°F
VK305 (p/n 12121)Temp Range 155-286°F
VK481 (p/n 17555A)Temp Range 165-220°F
8.0 K VK352 (p/n 06666B)Temp Range 155-286°F
VK352-D (p/n 06666BA-X)Temp Range 155-200°F
VK464 (p/n 13614A)Temp Range 155-200°F
VK350 (p/n 06665B)Temp Range 155-286°F
VK360 (p/n 15591)Temp Range 135-200°F
11.2 K VK377 (p/n 08337)Temp Range 155-286°F
VK469 (p/n 15764A)Temp Range 165-205°F
VK531 (p/n 10633)Temp Range 155-286°F
FL
GBGB
GB
GB
GBGBGB
GBGB
FL GB
GB
ConventionalFlush Style
Stainless Steel Upright/Pendent
Mirage® Concealed (non-ferrous)
Mirage® Concealed (high pressure)
Mirage® Concealed (adjustable)
5.6 K VK310 (p/n 06766B) VK402 (p/n 06702B) VK338 (p/n 14692) VK339 (p/n 14693)
VK462-MRI (p/n 15480A)
VK463 (p/n 13667A) VK462-ADJ (p/n 14918A,14919A)
8.0 K VK354 (p/n 06768B) VK464-MRI (p/n 13614A)
QUICK RESPONSE
Light Hazard Only
Recessed PendentFlat Concealed
PendentMirage Adjustable
ConcealedUpright
Horizontal Sidewall
Vertical Sidewall
2.8 K VK329 (p/n 06718B)Temp Range 155-286°F
VK461 (p/n 13831A)Temp Range 155-200°F
VK461-ADJ (p/n 14927A, 14928A)Temp Range 155-200°F
VK325 (p/n 06717B)Temp Range 155-286°F
VK333 (p/n 10035)Temp Range 155-286°F
4.2 K VK331 (p/n 06720B)Temp Range 155-286°F
VK465 (p/n 14262)Temp Range 155-200°F
VK465-ADJ (p/n 14929, 14930)
Temp Range 155-200°F
VK327 (p/n 06719B)Temp Range 155-286°F
5.6 K VK306 (p/n 06727B)Temp Range 155-286°F
GB
GBGB
QUICK RESPONSE
GB
High Pressure Recessed Pendent
High Pressure Upright
High Pressure Horizontal Sidewall
2.8 K VK342 (p/n 12290) VK340 (p/n 12286) VK344 (p/n 12287)
GB GB
GB
Light and Ordinary HazardLight and Ordinary Hazard
GB GBFLGB
GB
GBFL GB GB
GBGB GB
GB - Glass BulbFL - Fusible Link - Also available in fusible link version.
Additional Sprinklers
Additional Sprinklers
GB
GB GB
FL
(NOTE) The above photos are for illustrative purposes only and might not exactly match the sprinkler indicated. Always refer to the technical documentation on Viking’s web site for product dimensions and physical characteristics.
GB
GB
GB
GB - Glass BulbFL - Fusible Link - Also available in fusible link version.
(NOTE) The above photos are for illustrative purposes only and might not exactly match the sprinkler indicated. Always refer to the technical documentation on Viking’s web site for product dimensions and physical characteristics.
Flat Cover Plate – Pendent(VK461, VK462, VK463, VK464, VK465)Standard diameter (2-3/4”) – base part number 13504Large diameter (3-1/4”) – base part number 13642Square cover plate – base part number 15394
Flat Cover Plate – Pendent (ELO)(VK469, VK632 EC, VK538 EC)Large diameter (3-1/4”) – base part number 15765
Flat Cover Plate – Sidewall (VK408)Base part number 11451
Domed Cover Plate(VK102-D, VK202-D, VK302-D, VK352-D)Base part number 12381
Escutcheons (recessed pendent sprinklers)½” slip-on (2 piece) – base part number 06419 ¾” slip-on (2 piece) – base part number 06420
½” threaded (2 piece) – base part number 11038 ¾” threaded (2 piece) – base part number 11625
½” std flat escutcheon – base part number 02960 ¾” std flat escutcheon – base part number 05464
Ceiling rings for VK400/VK402 flush pendents sold separately. See Viking list price book for details.
* See back panel for available temperature and finishes, and corresponding part number suffixes
Select Sprinkler Wrenches
Part # 10896W/B
Use with all frame-style sprinklers and spray nozzles
Part # 16036W/B
Use with recessed pendent sprinklers with protective caps
Part # 13577W/B
Use with domed concealed pendent, wax coated, and recessed pendent sprinklers with protective shields
Part # 13655W/B
Use with recessed HSW sprinklers with protective shields and domed
concealed HSW sprinklers
Part # 14047W/B
Use with Mirage commercial concealed pendent sprinklers
Part # 14031
Use with Mirage commercial concealed pendent sprinklers
Heavy Duty
Light Duty
* Please refer to the “Light, Ordinary, and Extra Hazard” table on page 1 for additional sprinkler options.
High Pressure Recessed Pendent
High Pressure Upright
High Pressure Horizontal Sidewall
5.6 K VK 317 (p/n 12282) VK315 (p/n 12281) VK319 (p/n 12285)GBGBGB
* Please refer to the “Quick Response” table on the preceding page for additional sprinkler options.
* * * **
GB
INVERSIONES Y PROYECTOS INDUSTRIALES - Bogotá: 300 6000228 - Medellín: 300 7500033 - [email protected]
STANDARD COVERAGE SPRINKLERQUICK REFERENCE GUIDE
This guide is intended for general reference only. Prior to the design, lay-out, and/or installation of any sprinkler system, please refer to Viking’s technical documentation and always consult with the AHJ. Please visit www.vikinggroupinc.com for the most current technical data and product specifications. All products must be installed in accordance with the manufacturer’s current installation instructions. Viking reserves the right to change product specifications at any
time without notice and without incurring obligation.
www.vikinggroupinc.com
Light Hazard Only Sprinklers continued from page 3
To order, add desired finish (f) and temperature (t) suffix to end of base part number.
Example 1 [base(f)(t)]VK530, Chrome, 155ºF
09679FB
{Finish Suffixes (f)
Brass A
Chrome F
White-Poly M-/W
Black Poly M-/B
Black PTFE N
Wax Coated C
Poly w/Wax V-/W
ENT* JN
Temp Suffixes (t)
135°F A
155°F B
165°F C
175°F D
200°F / 205°F E
280°F /286°F G
360°F H
500°F L
Open Z
Light, Ordinary, and Extra Hazard
Recessed PendentDomed Concealed
PendentUpright Conventional
Stainless Steel Upright
Stainless Steel Recessed Pendent
5.6 K VK102 (p/n 10139)Temp Range 135-500°F
VK102-D (p/n 10139A-X)Temp Range 155-200°F
VK100 (p/n 12986)Temp Range 135-500°F
VK118 (p/n 10227)Temp Range 155-360°F
VK130 (p/n 05012B)Temp Range 155-500°F
VK132 (p/n 06483B) Temp Range 155-500°F
8.0 K VK202 (p/n 10142)Temp Range 155-500°F
VK202-D (p/n 10142A-X)Temp Range 155-200°F
VK200 (p/n 10141)Temp Range 155-500°F
VK120 (p/n 10228)Temp Range 155-360°F
11.2 K VK536 (p/n 07961)Temp Range 155-286°F
VK530 (p/n 09679)Temp Range 155-286°F
GB
GBGB
STANDARD RESPONSE
GBGB
GB
GBGB
Light Hazard Only
Recessed Pendent UprightHorizontal Sidewall
High Pressure Recessed Pendent
High Pressure Upright
High Pressure Horizontal Sidewall
2.8 K VK003 (p/n 10221)Temp Range 155-360°F
VK001 (p/n 10218)Temp Range 155-360°F
VK023 (p/n 09994)Temp Range 155-360°F
VK021 (p/n 09995)Temp Range 155-360°F
VK015 (p/n 09997)Temp Range 155-360°F
4.2 K VK004 (p/n 10222)Temp Range 155-360°F
VK002 (p/n 10219)Temp Range 155-360°F
5.6 K VK104 (p/n 10224)Temp Range 155-360°F
GB
GBGB
GB
STANDARD RESPONSE
GB
Vertical Sidewall
5.6 K VK106 (p/n 10226)GB
GB - Glass BulbFL - Fusible Link - Also available in fusible link version.
Additional Sprinklers
GB
GB
GB GB
(NOTE) The above photos are for illustrative purposes only and might not exactly match the sprinkler indicated. Always refer to the technical documentation on Viking’s web site for product dimensions and physical characteristics.
GBGB GB
GB - Glass BulbFL - Fusible Link - Also available in fusible link version.
(NOTE) The above photos are for illustrative purposes only and might not exactly match the sprinkler indicated. Always refer to the technical documentation on Viking’s web site for product dimensions and physical characteristics.
• Viking sprinklers are available from the factory with three wraps of PTFE tape applied to the threads at an additional charge. To order, add a “T” to the end of the part number. See list price book for pricing details.
• Many Viking sprinklers are offered in a “Cocoon” option, which includes the sprinkler, protective cap or clip, and two-piece escutcheon. The escutcheon’s adapter is threaded to the sprinkler and the entire unit is then protected by a plastic cap. Outer escutcheon rings are included in a separate box.
• Select 8.0 and 11.2 K factor sprinklers are available with ½ NPT thread size FOR REPLACEMENT ONLY.
• The maximum working pressure for high pressure sprinklers is 250 psi, unless otherwise indicated.
• Wax coatings are available on select standard response sprinklers up to and including 286°F. The standard finish is brass.
• Cover plates and escutcheons are sold separately. Sprinklers, escutcheons, and cover plates are available in custom colors at an additional charge. See pages F-8 and F-9 of Viking’s list price book for details
• Polyester and PTFE sprinklers are suitable for decorative applications and are UL Listed for corrosion resistance.
• Black PTFE sprinklers are also available with coated waterways and without glass bulbs.
• For corrosion resistance, Viking also offers several sprinklers that are UL Listed with Electroless Nickel PTFE (ENT) coating.
Mirage® is a registered trademark of The Viking Corporation
Example 2 [base(f)(t)]VK360, White, 175ºF
15591MD/W
{
Example 3 [base(f)(t)]VK464, Brass, 200ºF
13614AE
{{* Please refer to the “Standard Response” tables on previous pages for additional sprinkler options.
* * * * *
Starting with the 1996 edition of NFPA 13, quick response type sprinklers are required to be used in all Light Hazard Occupancies, with exceptions for existing systems that have standard response sprinklers.
*Electroless Nickel PTFE
INVERSIONES Y PROYECTOS INDUSTRIALES - Bogotá: 300 6000228 - Medellín: 300 7500033 - [email protected]
Kidde Fire FightingExtinguisher Product Guide
INVERSIONES Y PROYECTOS INDUSTRIALES - Bogotá: 300 6000228 - Medellín: 300 7500033 - [email protected]
Contents
Product Page #Choosing the right extinguisher 3ABC Multipurpose Dry Chemical Fire Extinguishers 4Regular Dry Chemical Fire Extinguishers 4Purple K Dry Chemical Fire Extinguishers 5Carbon Dioxide Fire Extinguishers 5Water Fire Extinguishers 6Wet Chemical Fire Extinguishers 6AR-AFFF Foam Fire Extinguishers 7Halotron 1 Fire Extinguishers 7Cartridge Operated Dry Chemical Fire Extinguishers 8Class D Dry Powder Fire Extinguishers 9Recharge Dry Chemical 9Wheeled Fire Extinguishers 10Technical Data 12Portable Extinguisher Brackets 14Additional Products Offered by Kidde Fire Fighting
Investing in people everywhere
Our mission is to make the world a safer place. To do this, we develop and supplyadvanced fire and safety products, supported by first class service. People andbusinesses everywhere trust our brands and depend on our expertise to protect whatis most valuable.
Only the best will do for those who risk their lives to protect others and we are proudthat firefighters across the world trust our products to enable them to do their job in theface of danger.
INVERSIONES Y PROYECTOS INDUSTRIALES - Bogotá: 300 6000228 - Medellín: 300 7500033 - [email protected]
Suppressing a fire effectively and safely requires using the right kind of extinguisher for thetype of fire. Use the helpful chart below to select the types of fire extinguishers you may needto address potential hazards in your workplace, vehicle, or home.
1. Identify the potential combustion hazards you may need protection against in yourworkplace, vehicle or home.
2. Choose an extinguisher from types indicated with color blocks on the chart.
3. Read in more detail about the types of extinguishers in the catalog; then contact yourlocal Kidde Fire Fighting distributor to order the right extinguishers for all of your fireprotection needs!
INVERSIONES Y PROYECTOS INDUSTRIALES - Bogotá: 300 6000228 - Medellín: 300 7500033 - [email protected]
Kidde Fire Fighting's Regular Dry Chemical Fire Extinguishers are specifically designed to meet theneeds of industrial and commercial environments where there is a flammable liquid risk. These unitsare cost effective fire protection solutions for manufacturing process such as spray paint operations,flammable storage areas, paint storage areas, and all Class B fire hazards.
Regular Dry ChemicalFire Extinguishers
ABC Multipurpose Dry ChemicalFire Extinguishers
Kidde Fire Fighting's ABC Multipurpose Dry Chemical FireExtinguishers are economical and extremely versatile,designed to meet the occupancy requirements of mostcommercial, industrial, and domestic environments. Allunits are manufactured with the highest percentage ofactive ingredient for maximum performance.
Features• Available in four sizes: 2½, 5, 10, and 20 lb.• Multipurpose agent contains 90% M.A.P.• Laser welded carbon steel cylinders• Epoxy coated cylinder to resist corrosion• Corrosion resistant aluminum valve and handle• Stainless steel hose band and nozzle retainer• Available with hanger hook or vehicle bracket• UL Listed and USCG Approved• Meets D.O.T. requirements• Twelve year interval between hydrotests• Six year warranty
Common combustibles
Flammable liquids and gases
Live electrical equipment
Flammable liquids and gases
Live electrical equipment
Features• Available in four sizes: 2¾, 5½, 10, and 20 lb.• Laser welded carbon steel cylinders• Epoxy coated cylinder to resist corrosion• Corrosion resistant aluminum valve and handle• Stainless steel hose band and nozzle retainer• Available with hanger hook or vehicle bracket• UL Listed and USCG Approved• Meets D.O.T. requirements• Twelve year interval between hydrotests• Six year warranty
INVERSIONES Y PROYECTOS INDUSTRIALES - Bogotá: 300 6000228 - Medellín: 300 7500033 - [email protected]
Purple K Dry ChemicalFire ExtinguishersKidde Fire Fighting's High Performance Purple K Dry Chemical Fire Extinguishers aredesigned for use on high hazard Class B and C fires where regular dry chemical may not besufficient. They are ideal for use in industrial and commercial environments where there is aflammable liquid risk.
Features• Available in four sizes: 2½, 5, 10, and 20 lb.• Laser welded carbon steel cylinders• Epoxy coated cylinder to resist corrosion• Corrosion resistant aluminum valve and handle• Stainless steel hose band and nozzle retainer• Available with hanger hook or vehicle bracket• UL Listed and USCG Approved• Meets D.O.T. requirements• Twelve year interval between hydrotests• Six year warranty
Flammable liquids and gases
Live electrical equipment
Carbon DioxideFire Extinguishers
Kidde Fire Fighting's Carbon Dioxide Fire Extinguishers are extremely versatile and aredesigned to tackle Class B flammable liquid and Class C electrical fire hazards. Providedas a supplement to ABC Dry Chemical Extinguishers, they are ideally suited for indoorapplications where delicate equipment or processes require a clean extinguishing agent.Carbon Dioxide is an effective and clean gaseous extinguishing agent that does not leaveany residue to clean up.
Features• Available in four sizes: 5, 10, 15, and 20 lb.• Light weight, high-grade, extruded aluminum cylinders• Corrosion resistant chrome plated brass valve• Stainless steel handle, lever, and hose band• Large loop stainless steel pull pin• Aluminum internal siphon tube• Available with hanger hook or vehicle bracket• UL Listed and USCG Approved• Meets D.O.T. requirements• Five year interval between hydrotests• Six year warranty
Flammable liquids and gases
Live electrical equipment
INVERSIONES Y PROYECTOS INDUSTRIALES - Bogotá: 300 6000228 - Medellín: 300 7500033 - [email protected]
Kidde Fire Fighting's High Pressure Water Fire Extinguishers are ideal for common combustiblematerials such as trash, wood, and paper. They are perfect for occupancies such as apartments,storerooms, schools, offices, and theaters. This non-toxic, environment-friendly, pressurized waterfire extinguisher provides long range, fast, and effective fire protection where Class A materialsmay be present.
WaterFire Extinguishers
Wet ChemicalFire Extinguishers
Kidde Fire Fighting's Wet Chemical Fire Extinguishers meet the NFPA-10 Class Krequirements for cooking media fire hazards found in today's busy commercial kitchens.These quality extinguishers are simple to use and extremely effective in handling the difficulttypes of cooking media fire hazards encountered due to new and improved cookingappliances, higher heating rates, and industry trends towards using more unsaturated oils.
Features• Available in two sizes: 6 liters and 2½ gallons• Stainless steel cylinders that resist corrosion• Corrosion resistant chrome plated brass valve• Stainless steel handle, lever, and hose band• Non-metallic finger guard for safer operation• Protective nozzle orifice seal to prevent nozzle blockage• Soft 360 degree mist nozzle to help prevent splashing• Available with hanger hook or vehicle bracket• UL Listed - Meets D.O.T. requirements• Five year interval between hydrotests• Six year warranty
Features• Available size: 2½ gallon• Stainless steel cylinders that resist corrosion• Corrosion resistant chrome plated brass valve• Stainless steel handle, lever, and hose band• Aluminum internal siphon tube• Quick and easy to refill• Available with hanger hook or vehicle bracket• UL Listed• Five year interval between hydrotests• Six year warranty Common combustibles
Cooking media
INVERSIONES Y PROYECTOS INDUSTRIALES - Bogotá: 300 6000228 - Medellín: 300 7500033 - [email protected]
AR-AFFF FoamFire ExtinguishersKidde Fire Fighting's AR-AFFF Foam Fire Extinguishers contain an alcohol resistant (AR) type of aqueousfilm-forming foam (AFFF). They are specifically formulated for optimum performance in a hand portablefire extinguisher. When sufficiently applied, Kidde Fire Fighting's AR-AFFF Foam vapor sealing capabilitycan actually keep a fire from occurring. These foam extinguishers are effective on Class A commoncombustibles as well as hydrocarbon and polar solvent types of Class B flammable liquids, so theyeliminate the application guesswork often associated with other foams. The unique synthetic base of KiddeFire Fighting's AR-AFFF foam has no offensive odor, is non-toxic, environmentally friendly, biodegradable,and extremely simple to use and clean up.
These foam units are ideal for Class B hazards found in manufacturing facilities, construction sites andworkshops, laboratories and test facilities, fuel handling and transfer areas, gas stations and servicegarages, warehouses and storage facilities, racetracks and showrooms, and print shops.
Features• Available size: 6 liter and 2½ gallon• Stainless steel cylinders that resist corrosion• Corrosion resistant chrome plated brass valve• Stainless steel handle, lever, and hose band• Heavy duty anodized aluminum air aspirating nozzle• Quick and simple recharge• Available with hanger hook or vehicle bracket• Highest Class B flammable liquid fire ratings• UL Listed• Five year interval between hydrotests• Six year warranty
Common combustibles
Flammable liquids and gases
Halotron 1Fire Extinguishers
Kidde Fire Fighting's Halotron-1 Fire Extinguishers provide a safe, clean, and environmentally friendlysolution for protection of sensitive electrical equipment where agent residue is a concern. They are ideallysuited for computer rooms, data storage, telecommunication, robotics, or any high tech industrial process.Widely accepted as a Halon 1211 replacement, the Halotron-1 fire extinguisher is approved by the FederalAviation Administration for use on ramp fire protection and is also approved for use by the EnvironmentalProtection Agency.
Features• Available in four sizes: 2½, 5, 11, and 15.5 lb.• Laser welded carbon steel cylinders• Epoxy coated cylinder to resist corrosion• Corrosion resistant chrome plated brass valve• Stainless steel handle, lever, and hose band• Large loop stainless steel pull pin• Steel internal siphon tube• Available with hanger hook or vehicle bracket• UL Listed and USCG Approved• Meets D.O.T. requirements• Twelve year interval between hydrotests• Six year warranty
Flammable liquids and gases
Live electrical equipment
INVERSIONES Y PROYECTOS INDUSTRIALES - Bogotá: 300 6000228 - Medellín: 300 7500033 - [email protected]
Kidde Fire Fighting offers the industry's most effective Cartridge Operated Fire Extinguisher, incorporatingstandard features that go far beyond the options available on other units. Because Kidde Fire Fightingcartridge operated models offer the very best in fire fighting performance, they are the professional'schoice.
These models are ideally suited for high risk forms of industrial fire hazards that demand reliable andeffective hand portable fire extinguishers. Kidde Fire Fighting cartridge operated extinguishers can beeasily and quickly recharged in the field.
Two versions of this extinguisher are available:
· Carbon Dioxide Cartridge· Nitrogen Cartridge LT (low temperature) *
* Specifications in technical data section refer to carbon dioxide cartridge operated models only. Please call your Kidde Fire Fighting distributor
for updated information on nitrogen LT expellant cartridge models.
Cartridge Operated Dry ChemicalFire Extinguishers
Features• Available sizes: 10, 20, and 30 lb.• Extinguishing agents: ABC Multipurpose, BC Regular, and Purple K• Standard and high flow models for meeting optimum fire fighting performance objectives• Designed with more agent for higher ratings, extended discharge times and higher flow rates• Low maintenance swivel discharge nozzles for use by both right and left handed operators• Offset visual indicator fill caps have sure-grip surfaces for ease of removal, even with gloves• Designed to accommodate visual seals for positive tamper-proof verification• Curved carrying handle for operator comfort and optimum stairway travel clearance• Permanent UL Listing markings in agent cylinder allow nameplate replacements in the field• Full 360 degree attachment welds for added strength and corrosion resistance• Stainless steel cartridge guards and ring pins for durability and extended life• Drawn carbon steel agent cylinders with corrosion resistant epoxy powder paint finish• Available with corrosion resistant heavy duty vehicle brackets• UL Listed and USCG Approved - meets D.O.T. requirements• 12 year warranty and periodic hydrostatic test interval
Common combustibles
Flammable liquids and gases
Live electrical equipment
(ABC Multipurpose only)
INVERSIONES Y PROYECTOS INDUSTRIALES - Bogotá: 300 6000228 - Medellín: 300 7500033 - [email protected]
Class D Dry PowderFire ExtinguishersKidde Fire Fighting's Class D Dry Powder Fire Extinguisher is suitable for use on metal fires.It incorporates a unique soft flow extension applicator with built in long range nozzle thatensures the operator's hands are kept away from the extreme heat of the fire and helps toprevent inhalation of the toxic fumes caused by the burning metal. This applicator can bequickly detached to provide a straight stream of powder where greater range is required.
This Class D dry powder extinguisher has been tested and approved for fires involvingmagnesium, sodium (spill and in depth), potassium, and sodium potassium alloys.
Features• Available size: 30 lb.• Laser welded carbon steel cylinders• Corrosion resistant yellow paint finish• Stainless steel handle, lever, and hose band• Corrosion resistant chrome plated brass valve• FM approved• Six year warranty
Recharge Dry Chemical
Kidde Fire Fighting's high quality dry chemical extinguishing powders are high quality, effective extinguishingagents supplied with our original equipment and are available for extinguisher recharge in convenient 50-lb plasticpails. Kidde Fire Fighting dry chemicals are UL Listed and are available as ABC, Regular BC, and Purple K.
The active ingredient in our dry powders is mixed with additives for improving their fluidity and makes themweather resistant; ingredients are environmentally friendly and non-toxic to humans and animals. Compatiblewith AFFF foams and may be used with nitrogen, carbon dioxide, and compressed air as agent propellants. Maybe used in hand portable, wheeled, and vehicle extinguisher units.
ABC Dry Chemical· A highly efficient ABC type multipurpose fire extinguishing powder.· Suitable for combustible liquids, burning gases, ember-producing, organic solid materials, and mixed fires. Can
be applied on fires involving energized electrical equipment.
Regular BC Dry Chemical· An efficient BC type fire extinguishing powder.· Suitable for combustible liquids and burning gases. It can be applied on fires involving energized electrical
equipment.
Purple K Dry Chemical· A highly efficient BC type fire extinguishing powder.· One of the most impressive agents against Class B fires.· Suitable for combustible liquids and burning gases. It can be applied on fires involving energized electrical
equipment.
Combustible metals
INVERSIONES Y PROYECTOS INDUSTRIALES - Bogotá: 300 6000228 - Medellín: 300 7500033 - [email protected]
WheeledFire ExtinguishersCarbon Dioxide Self-Expelling ModelsThese quality wheeled fire extinguisher models are designed for single person use and operation.They are extremely versatile and ready to tackle flammable liquid and electrical equipment firehazards. They are ideally suited for industrial applications where delicate equipment or processesrequire a clean extinguishing agent.Carbon Dioxide is an effective and clean gaseousextinguishing agent that leaves no residue to clean up. These models aresuitable for use on Class B and C fires.
Features• 50 and 100 pound models• Heavy duty hand wheel cylinder activation valves• DOT specification steel cylinders• Easy to read nameplates• Corrosion resistant epoxy powder paint finish• Heavy duty steel frame• 16 inch semi-pneumatic rubber wheels• Heavy duty industrial discharge valve & nozzle• Quick release discharge nozzle retainer• UL Listed - meets DOT requirements• 5 year periodic hydrostatic test interval• 6 year product warranty
Features• Nominal 50 and 150 pound model sizes• Multipurpose, Regular & Purple-K dry chemical agents• Heavy duty cylinder activation valves• DOT 4BW specification steel cylinders• Corrosion resistant epoxy powder paint finish• Heavy duty steel frames• 12 and 16 inch semi-pneumatic rubber wheels• Heavy duty swivel discharge nozzles• Easy to read nameplates• UL Listed & USCG Approved - meets DOT requirements• 5 year periodic hydrostatic test interval• 6 year product warranty
Dry Chemical Stored Pressure ModelsQuality wheeled fire extinguisher models designed for single personoperation and to pass easily through standard doorways. Badger storedpressure wheeled extinguishers are economical and ideal for addressingthe many forms of high risk fire hazards sometimes found withincommercial and industrial applications. Badger dry chemical extinguishingagents contain the highest percentage of essential base ingredients foundin the fire extinguisherindustry. The “Multipurpose” agent models are suitablefor use on Class A:B:C fires. The “Regular” and “Purple-K” agent models are suitable for Class B:C fires.
INVERSIONES Y PROYECTOS INDUSTRIALES - Bogotá: 300 6000228 - Medellín: 300 7500033 - [email protected]
Features• Nominal 350 pound model sizes• Multipurpose, Regular and Purple-K dry chemical agents• Heavy duty cylinder activation valves• Corrosion resistant epoxy powder paint finish• Heavy duty steel frames• 36 inch diameter x 6 inch wide steel wheels• 50 foot x 1 inch discharge hose• Heavy duty discharge nozzles• Easy to read nameplate• UL Listed & USCG Approved - meets DOT requirements• 12 year periodic hydrostatic test interval• 6 year product warranty
Features• Nominal 150 pound model sizes• Multipurpose, Regular and Purple-K dry chemical agents• Heavy duty cylinder activation valves• Corrosion resistant epoxy powder paint finish• Heavy duty steel frames• 16 inch (rubber) or 36 inch (steel) diameter wheel• 50 foot x 3/4 inch discharge hose• Heavy duty discharge nozzles• Easy to read nameplate• UL Listed - meets DOT requirements• 12 year periodic hydrostatic test interval• 6 year product warranty
Dry Chemical Pressure Transfer ModelsHigh capacity wheeled fire extinguisher models designed for single personoperation and to pass through 36-inch wide industrial doorways. Badgerpressure transfer wheeled extinguishers are ideal for use in ruggedindustrial applications or anywhere the need for quick and simple on-siteequipment recharge capability is desired.The “ABC” agent models are suitable for use on Class A:B:Cfires. The“Regular” and “Purple-K” agent models are suitable for Class B:C fires.
Dry Chemical Regulated ModelsDesigned for single person operation and to pass easily through standard doorways. Badgerregulated wheeled extinguishers are ideal for high risk fire hazards that dictate consistent agentdischarge flow rates and ranges throughout a fire fighting evolution. Ideal for rugged industrialapplications that desire quick and simple on-site equipment recharge capability. Badger drychemical extinguishing agents contain the highest percentage of essential base ingredients foundin the fire extinguisherindustry. The “Multipurpose” agent models are suitablefor use on Class A:B:C fires. The “Regular” and “Purple-K”agent models are suitable for Class B:C fires.
INVERSIONES Y PROYECTOS INDUSTRIALES - Bogotá: 300 6000228 - Medellín: 300 7500033 - [email protected]
Whatever happens, you can count on us
INVERSIONES Y PROYECTOS INDUSTRIALES - Bogotá: 300 6000228 - Medellín: 300 7500033 - [email protected]
INVERSIONES Y PROYECTOS INDUSTRIALES - Bogotá: 300 6000228 - Medellín: 300 7500033 - [email protected]
HOCHIKI SMOKE DETECTOR RESPONSE CHART
HIGHSENSITIVITY
LOW SENSITIVITY
Test APAPER
Test BWOOD
Test CGASOLINE
Test DPOLYSTYRENE
Test ESMOLDERING
IonizationDetectors
TypicalPhotoelectric
OPTIMUM SENSITIVITY LEVEL
HochikiPhotoelectric
SBC SOUNDER BASEThe conventional sounder base is compatible for use with many of our “base” type detectors.Its features make it ideal for use where sounders are required such as hotels, apartments andhospitals. Easily configured to 12 or 24-volt applications through use of a dipswitch (2-wire only). The bases can be configured to activate in individual, group, or global modes.
NS6 CONVENTIONAL BASEThe conventional bases come in 6” diameter, and areavailable with or without a current limiting resistor (dependingupon control panel requirements) and are available in white plastic.
• SBC-2W 2-wire• SBC-2RW 2-wire w/relay
• SBC-4/12W 4-wire 12-volt• SBC-4/24W 4-wire 24-volt
The conventional bases offer great flexibility, please refer to compatibility listings for details. Our HSC series bases are available with relay and can be used where 4-wire applications are required. Please see list below for model numbers.
HOCHIKI SMOKE
DETECTOR RESPONSE
CHART
HSC-220R Relay base (88mA)HSC-221R Relay base (49mA)HSC-224R Relay base (43mA)HSC-4RW 4 wire 24-volt base (43mA)
HSC-4R12W 4 wire 12-volt base (47mA)HSC-224L Latching LED base (35-42mA)HSC-220L Latching LED base (67-80mA)HSC-221L Latching LED base (37-45mA)
ADDITIONAL APPLICATIONSSTANDARD TYPES
NS6-100W Non current limitedNS6-220W 93mA current limitNS6-221W 46mA current limitNS6-224W 43mA current limit
SLV-24 PHOTOELECTRIC SMOKE DETECTOR SERIESThe SLV-24 series is a 24 volt “plug-in” type detector. This detector offers the low profile design and is available with various bases (see below) and with or without a heat sensor to satisfy a wide range of applications.
SLR-835HW PHOTOELECTRIC SMOKEDETECTOR WITH HEATThe SLR-835 series photoelectric smoke detectors come withtwo bi-colored LED’s for indication of status, removeablelabyrnth for cleaning or replacement and built in automaticsensitivity check with magnetic alarm test feature. The SLR-835HW series detector offers the same features asthe SLR-835W, but adds a 135°F latching heat sensor.
SmOkE DETECTORS AND BASES
C O N V E N T I O N A L
INVERSIONES Y PROYECTOS INDUSTRIALES - Bogotá: 300 6000228 - Medellín: 300 7500033 - [email protected]
SPECIAL APPLICATIONSThe special application detector line provides a wide range of products to meet the needs of other types of detection which may not be found in traditional spot type smoke and heat detectors. The SPC-24N (point-to-point) and SRA-24 (reflective) beam detectors provide open area smoke detection from spans of 32.8’-328’ and 25’-100’ respectively. The DH-98 duct detector series offers conventional smoke detection with the choice of ion or photoelectric detectors.
SRA-24 REFLECTIVE BEAM SMOKE DETECTOR• Detection coverage from 25’ - 100’• Pulsed beam to reduce overall current consumption and improve noise rejection characteristics• Innovative “low profile reflective mirror”• Automatic compensation for signal drift or dirty lens• Fire detection sensitivity can be set to either 20% or 30% obscuration
SPC-24N POINT-TO-POINT BEAM SMOKE DETECTOR• Microprocessor based for reliability• Three field adjustable sensitivity settings• Form A alarm and Form B trouble contacts• Automatic compensation for signal drift or dirty lens• Simple setup and alignment with signal strength LED’s• Provides 60’ on center linear protection at a range of 32.8’ to 328’• Calibrated filters available to verify sensitivity• Color-coded emitter and receiver labels for easy recognition
SZA-NA (Fm)HIGH SENSITIVITY SMOKE DETECTION SYSTEM• Detects very low density smoke • 200 m2 detection area (2150 ft2) • No filter necessary • N/O or N/C alarm contacts form A, form B • Automatic and manual laser tests • Four selectable sensitivity ranges • 3 alarm levels• FM Approved
DH-98 SERIES CONVENTIONAL DETECTORS• Detects and controls the spread of smoke throughout the building HVAC ducts• Installs quickly and easily• Interchangeable “Plug-in” detector heads• No screens or filters to clean• Durable steel back box with clear cover• Compatible with building automation and fire alarm systems• Cover provides magnet window and placement guide for go / no-go
operational testing without disassembly• UL Listed accessories: remote power, remote alarm indication capability
and remote horn / piezo capability• Photoelectric, Ionization and High Voltage models are available
NSRT & NSTT SMOKE DETECTOR TESTER & REMOVAL TOOL• Available hand-held or with 15’ extension pole• No combustion material needed
SOLO-461 CORDLESS (CAT™) DETECTOR TESTER• Tests detectors up to 30ft with SOLO universal access poles
• Operates from 110/120V, AC supply or 12VDC car battery
SmOkE AND HEAT DETECTOR TEST ACCESSORIESA variety of test accessories and testers are available for your installation and repair needs. The NSRT and NSTT smoke detector tester and removal tools, the TSE-A100 self-contained smoke generator pole and the SOLO-461 heat detector tester.
TSE-A100 SELF-CONTAINED SMOKE GENERATOR POLE• Tests all types of smoke detectors• Extends 14.1’• Exhaust function to clear detector
HCP CONVENTIONAL PANELS• Expandable panel selection• Class A or B initiating circuits• Indicating circuits with individual trouble indicators (1.25 - 1.7 Amp Max. per circuit)• Each indicating circuit can be silenceable or non-silenceable• Audibles may be configured as steady, temporal code, California code or march time• Each initiating circuit can be configured as alarm, supervisory, waterflow or trouble• Outputs for 4 wire re-settable smoke power supply• Alarm verification in initiating circuits• Easy configuration via DIP switches or push button and slide switches on front panel
MODELS INITIATING ZONESHCP-202 2HCP-204 4HCP-204E 4 expandable to 8HCP-1008E 8 expandable to 64
C O N V E N T I O N A L
INVERSIONES Y PROYECTOS INDUSTRIALES - Bogotá: 300 6000228 - Medellín: 300 7500033 - [email protected]
The History of the Hochiki Group of Companies
The history of Hochiki dates back to 1918, with the formation of the Hochiki Group of Companies. Significant events in Hochiki’s history are dated up to present day:
1918 ::::::: Hochiki Corporation was established in Tokyo, Japan as Japan’s first manufacturer of fire alarm equipment
1920 ::::::: The world’s first addressable fire alarm system was installed in Japan by Hochiki Corporation
1951 ::::::: The production of the first “Rate-of-Rise” heat detectors
1967 ::::::: The Ionization Smoke Detector was developed
1972 ::::::: Hochiki America Corporation subsidiary was established
::::::: Hochiki Research Laboratory in Tokyo, Japan was established
::::::: Hochiki Ionization Smoke Detector was approved by Underwriters’ Laboratories, Inc.
1973 ::::::: Intrinsically Safe Fire Alarm System was developed
1977 ::::::: Hochiki America moved its facility from Hawaiian Gardens, CA to Huntington Beach, CA
1984 ::::::: Hochiki America began manufacturing detector bases
1986 ::::::: The current analog addressable fire protocol was developed – Digital Communication Protocol (DCP)
1988 ::::::: Hochiki America began operation as a manufacturing facility with additional production lines of smoke detectors and bases being transitioned over to the United States from Japan
1991 ::::::: Hochiki Europe (UK) Ltd. was established in Kent, United Kingdom
1992 ::::::: Hochiki America established APA Technology Inc., a subsidiary of Hochiki America and Hochiki Corporation
1994 ::::::: Hochiki America obtained ISO 9002 certification
1995 ::::::: Hochiki Corporation opened one of the world’s largest fire testing facilities in Miyagi, Japan
1997 ::::::: Hochiki Singapore Branch Office was established
1998 ::::::: APA Technology Inc. merged with Hochiki America
1999 ::::::: Hochiki America moved to a larger facility in Buena Park, CA
2001 ::::::: The Beijing, China representative office was established
2003 ::::::: Hochiki America introduced its first “UL” approved analog addressable fire alarm control panel- the FireNET™
2006 ::::::: The Hochiki Fire Prevention Technology Corporation was established in Beijing, China
2007 ::::::: Hochiki America celebrated its 35th Anniversary
::::::: Hochiki America acquired UL 864 9th Edition listing for FireNET™
::::::: Hochiki America begins production of new models, ALK-V and SLV-24
Almost 90 years later, the Hochiki Group of Companies consists of 5 factories, 19 subsidiaries, and 36 branches throughout the world. Anchored by Hochiki Corporation, Hochiki America and Hochiki Europe, we are combining our efforts to offer the highest quality and most reliable fire products to meet today’s ever-changing global market.
H I S T O R Y
INVERSIONES Y PROYECTOS INDUSTRIALES - Bogotá: 300 6000228 - Medellín: 300 7500033 - [email protected]
Fire Sprinkler Monitoring Product Catalog
INVERSIONES Y PROYECTOS INDUSTRIALES - Bogotá: 300 6000228 - Medellín: 300 7500033 - [email protected]
Flow Switches
Potter Electric Signal Company, LLC
Established in 1898, Potter Electric Signal Company has earned a reputation worldwide as an elite provider of goods and services. Potter produces a wide array of products including fire sprinkler monitoring systems, electronic fire systems, and vault and safe security systems. With more than 110 years of sprinkler monitoring experience, Potter is also the trusted source for corrosion testing, monitoring, and treatment with our comprehensive suite of corrosion solutions.
At Potter, not only do we supply our customers with products that provide real world solutions for their unique needs, we strive to provide them unequaled service and technical support.
At Potter you will always receive prompt dependable service from our dedicated team of professionals.
Every employee at Potter is committed to providing you, the customer, the peace of mind in knowing that when you purchase our products, you are providing your customers the very best product available for the protection of life and property.
Potter is THE Symbol of Protection.
INVERSIONES Y PROYECTOS INDUSTRIALES - Bogotá: 300 6000228 - Medellín: 300 7500033 - [email protected]
Flow Switches
Updated retard dial for better accuracy
Non-Corrosive Saddle Bushing eliminates water
to metal contact stopping the possibility of corrosion
Visual switch
activation
Field replaceable switch/retard assembly
Two knockouts for access to separate low and high voltage wiring chambers
One knockout factory removed
and covered with easily removable
plug for faster installation.
INVERSIONES Y PROYECTOS INDUSTRIALES - Bogotá: 300 6000228 - Medellín: 300 7500033 - [email protected]
Flow Switches
VSRWaterflow Alarm Switch
NEMA 4 solid metal enclosure•Factory installed neoprene gasket•0-90 second field replaceable pneumatic retard•450 psi system pressure rated•Synchronized switch action•5-year warranty•Listings: UL, cUL, FM, LPCB, CSFM, NYMEA, and CE•
VSR-EU has a 30 second retard and is VdS, EN 12259-5 and LPCB approved
VSR-SWaterflow Alarm Switch Small Pipe
NEMA 4 solid metal enclosure•Factory installed neoprene gasket•0-90 second field replaceable pneumatic retard•300 psi system pressure rated•Two 1/2” KOs for dual voltage applications•1” threaded brass bushing fits pipe sizes 1”-2”•Ideal for both commercial and residential applications.•5-year warranty•Listings: UL, cUL, CSFM, and NYMEA •
VSR-S EU is EN 12259-5 and LPCB approved
VSR-SG/STWaterflow Alarm Switch With Union
NEMA 4 solid metal enclosure •Factory installed neoprene gasket•0-90 second field replaceable pneumatic retard•175 psi system pressure rated•1” male CPVC fitting or 1” NPT bushing•Fits CPVC pipe sizes 1”, 1 ¼”, 1 ½”, and 2”•Special fitting allows for installation in confined spaces•5-year warranty•Listings: UL, cUL, CSFM, NYMEA, and CE•
INVERSIONES Y PROYECTOS INDUSTRIALES - Bogotá: 300 6000228 - Medellín: 300 7500033 - [email protected]
Flow Switches
VSR-CWaterflow Alarm Switch For Copper Pipe
NEMA 4 solid metal enclosure•Factory installed neoprene gasket •0-90 second pneumatic retard•175 psi system pressure rated•Non-corrosive saddle bushing•Two 1/2” KOs for dual voltage applications•Pipe Sizes: 2”, 2 ½”, 3”, 4” for type K, L, and M copper pipe•5-year warranty•Listings: UL, CSFM, and NYBSA•
VSR-FE-2Waterflow Alarm Switch With Electronic Retard
NEMA 4 solid metal enclosure•Factory installed neoprene gasket•0-90 second electronic retard•450 psi system pressure rated •Non-corrosive saddle bushing•Two ½” KOs for dual voltage applications•Pipe schedules 10-40 Sizes 2”-8”•5-year warranty•Listings: UL, ULC and FM•
VS-SPSpecial Application Waterflow Switch Without Retard
NEMA 4 solid metal enclosure•Factory installed neoprene gasket•250 psi system pressure rated •One SPDT (Form C) contact second set of contacts optional•1” solid brass threaded bushing•Twelve paddles provided for use on plastic, copper, and •
schedule 40 pipe5-year warranty•Listings: UL, cUL, CSFM, NYBSA, and CE•
INVERSIONES Y PROYECTOS INDUSTRIALES - Bogotá: 300 6000228 - Medellín: 300 7500033 - [email protected]
Flow Switches
7
WFSR-FPressure Activated Waterflow Alarm Switch With Retard
NEMA 4 solid metal enclosure•Factory installed neoprene gasket •0-90 second pneumatic retard•175 psi system pressure rated •½” male NPT fitting•Eliminates the need for retard chambers•Two ½” KOs for dual voltage applications•5-year warranty•Listings: UL, cUL, CSFM, FM, NYMEA, and CE•
VSGWaterflow Alarm Switch For Low Flow
NEMA 4 solid metal enclosure•Factory installed neoprene gasket•0-90 second electronic retard•450 psi system pressure rated•Non-corrosive saddle bushing•Two 1/2” KOs for dual voltage applications•Pipe Sizes 2”, 2 ½”, 3”, 4”•Operates at 4 GPM, specially designed for water mist systems•5-year warranty•Listings: UL and CSFM•
RD13Residential Riser
Service pressure up to 175 psi•Unit includes VSR-SG•Drain and test valve•Pressure gauge •Service usage, NFPA 13D &13R•Sizes: 1”, 1 ¼”, 1 ½”, 2”•5-year warranty on VSR-SG•
INVERSIONES Y PROYECTOS INDUSTRIALES - Bogotá: 300 6000228 - Medellín: 300 7500033 - [email protected]
Pressure Switches
Two 1/2” knockouts for dual high/low voltage
functions or in/out wiring
Complies with NEC 760.55
Single captive tamper-proof screw for quick access and easy
installation
Separate wiring chambers creating the only NEC
760.55 code compliant pressure switch in the
industry
Compact design for easy installation in tight spaces and rain-lip for protection against the elements
INVERSIONES Y PROYECTOS INDUSTRIALES - Bogotá: 300 6000228 - Medellín: 300 7500033 - [email protected]
Pressure Switches
PS10-1 & 2Pressure Type Waterflow Alarm/Supervisory Switch
NEMA 4 solid metal enclosure•Factory installed neoprene gasket•Pressure range 4-15 psi•300 psi system pressure rated•½” male NPT fitting•Two ½” knockouts for dual voltage applications•Separate isolated wiring chambers eliminate NEC questions regarding •
multi-voltage applicationsFactory set for operation at:•
- Pressure Increase at 6 psi - Pressure Decrease at 5 psi
PS10-1, one set of SPDT (Form C)•PS10-2, two sets of SPDT (Form C)•5-year warranty•Listings: UL, cUL, CSFM, FM, LPC, NYMEA, and CE •
PS10 ‘VdS’ is listed with UL, FM, VdS, CUL, LPCB, and CSFM
PS40-1 & 2High/Low Supervisory Pressure Switch
NEMA 4 solid metal enclosure•Factory installed neoprene gasket•Pressure range 10-60 psi•300 psi system pressure rated•½” male NPT fitting•Two ½” knockouts for dual voltage applications•Separate isolated wiring chambers eliminate NEC questions regarding •
multi-voltage applicationsFactory set for operation at:•
- PS40-1 Pressure Decrease at 30 psi - PS40-2 Pressure Increase at 50 psi, Pressure Decrease at 30 psi
Independent switch adjustment allows easy adjustment of one switch • without affecting the other switch
5-year warranty•Listings: UL, cUL, CSFM, FM, LPC, NYMEA, and CE •
PS40 ‘VdS’ is listed with UL, FM, VdS, CUL, LPCB, and CSFM
INVERSIONES Y PROYECTOS INDUSTRIALES - Bogotá: 300 6000228 - Medellín: 300 7500033 - [email protected]
Pressure Switches
10
PS40-TMCompletely Pre-Assembled Low Pressure Test Module
For use on dry pipe and pre-action systems •Includes PS40-2 pressure switch, BVL bleeder valve, and easy to •
read, high quality, pressure gauge pre-assembled with galvanized pipe
Meets the requirement of NFPA 72, 2010, 17.16.2.2 and NFPA 25, • 2011, 13.4.4.2.6
Eliminates accidental tripping of the dry pipe valve during testing•Saves time and money on inspections and testing•
PS100Pressure Drop Type Waterflow Alarm/Switch
NEMA 4 solid metal enclosure•Factory installed neoprene gasket•300 psi system pressure rated •Pressure range 25-175 psi•½” male NPT fitting•Two ½” knockouts for dual voltage applications•Separate isolated wiring chambers eliminate NEC questions regarding •
multi-voltage applicationsFactory set for operation at 90 psi on pressure decrease •5-year warranty•Listings: UL, ULC, CSFM, FM, LPC, NYMEA, and CE•Typically used on excess pressure systems•
PS120-1 & 2High/Low Supervisory Pressure Switch
NEMA 4 solid metal enclosure•Factory installed neoprene gasket •300 psi system pressure rated •Pressure range 25-175 psi •½” male NPT fitting•Two ½” knockouts for dual voltage applications•Separate isolated wiring chambers eliminate NEC questions regarding •
multi-voltage applicationsFactory set for operation at: •
- PS120-1 pressure decrease at 110 psi - PS120-2 pressure increase at 130 psi, pressure decrease at 110 psi
5-year warranty•Listings: UL, ULC, CSFM, FM, LPC, NYMEA, and CE•Typically used on excess pressure systems •
PS120 ‘VdS’ is listed with UL, FM, VdS, CUL, LPCB, and CSFM
INVERSIONES Y PROYECTOS INDUSTRIALES - Bogotá: 300 6000228 - Medellín: 300 7500033 - [email protected]
Pressure Switches
ADPSAdjustable Deadband Pressure Switch
Independent set and reset points•Adjustable operating range 25-300 PSIG•12 PSI minimum deadband•NEMA 4X enclosure for indoor or outdoor use•Ambient/media temperature range: -4°F to 180°F (-20°C to 82°C)•For use with motor starter/contactor•Listings: UL, CE, and CSA•
PCSPump Control Switch
Independent set and reset points•Adjustable operating range 25-300 PSIG•12 PSI minimum deadband•NEMA 4X enclosure for indoor or outdoor use•Ambient/media temperature range: 40°F to 140°F (4.5°C to 60°C)•1/2 HP rated switch•Listings: UL, CE, and CSA•
BVLLever Type Bleeder Valve
For use as a test valve for supervisory pressure switches on wet pipe • sprinkler systems that have excess pressure and dry pipe sprinkler systems
Should be installed in-line with pressure switch and gauge•Convenient means for removal or testing the pressure actuated •
device without affecting the pressure in the system½” NPT connections•
INVERSIONES Y PROYECTOS INDUSTRIALES - Bogotá: 300 6000228 - Medellín: 300 7500033 - [email protected]
Tamper Switches
PTS-CPlug Type Supervisory Switch
NEMA 6P submersible•Factory installed neoprene gasket•SPDT contacts 100mA at 28 VDC/AC, 250mA at 12 VDC/AC•SPDT cover tamper 250mA at 28 VDC/AC•Dimensions 7”L x 3.75”W x 3”D (including bracket)•Temperature rating -40°F to 140°F•5-year warranty•Listings: UL, cUL, FM, NYMEA, and CSFM•For non-rising stem valves and other special applications•
WLSTank Water Level
NEMA 4 solid metal enclosure •Detection range before 3” rise/ before 3” fall of water level•Detection of 12” drop in water level•Maximum pressure 175 psi •Used on steel or wooden tanks•Works on pressure or gravity tanks•Listings: UL, NYMEA, and CSFM•
RTS-O/CRoom Temperature Switch
Designed to warn of potential sprinkler pipe freezing or other cold • detection applications
White ABS enclosure•Epoxy sealed stainless steel case, bimetallic operating mechanism •
sensor Silver clad contacts •RTS-O: Normally Open •RTS-C: Normally Closed•Temperature setting: 40°F ±5°F, 5°C ±3°C•UL and cUL listed for fire sprinkler supervisory service•
INVERSIONES Y PROYECTOS INDUSTRIALES - Bogotá: 300 6000228 - Medellín: 300 7500033 - [email protected]
Tamper Switches
OSYSU-1 & 2Outside Screw & Yoke Valve Supervisory Switch
NEMA 6P (Submersible)•Factory installed neoprene gasket•OSYSU-1: One set of SPDT (Form C)•OSYSU-2: Two sets of SPDT (Form C)•Fits 1/2”-12” valves•Fully adjustable stainless steel trip rod cuts installation time by 75%•Installs on OS&Y valves in any position•5-year warranty•Listings: UL, cUL CSFM, FM, NYMEA, and CE•
PCVS-1 & 2Control Valve Supervisory Switch
NEMA 6P (Submersible)•Factory installed neoprene gasket•PCVS-1: One set of SPDT (Form C)•PCVS-2: Two sets of SPDT (Form C) •1/2” male NPT fitting•Fully adjustable stainless steel trip rod•Installs on wall and post indicator valves, butterfly valves in any •
position5-year warranty•Listings: UL, cUL, CSFM, FM, NYMEA, and CE•
TTSTank Temperature Switch
NEMA 4 enclosure •Operates at 40°F and 140°F•Available for steel or wood tanks •Listings: UL, FM, CSFM, and MEA•
INVERSIONES Y PROYECTOS INDUSTRIALES - Bogotá: 300 6000228 - Medellín: 300 7500033 - [email protected]
Tamper Switches
RBVSRetrofit Ball Valve Switch
Monitors alarm line ball valves •Perfect for backflow preventers 1” - 2”•Mounts on standard & “T” style valves•NEMA 4 rated enclosure for indoor and outdoor use•Fits virtually any 1/2” - 2” ball valve•Optional cover tamper switch•US Patent 6,945,509•Meets the requirements of NFPA 13, 2010, 18.17.1and IBC/IFC •
2009, 903.4 Listings: UL, cUL, NYMEA, and FM Approved•
WCSWater Column Switch
Used for Dry Pipe/Pre-action systems •Detects presence of water above clapper•NEMA 1 rated enclosure for indoor use•175 psi maximum pressure•SPDT 10 Amps at 120 VAC, 2.0 Amps at 30 VDC resistive•Automatic reset•Patent pending•Listing: UL•
Valve shown for reference only.
INVERSIONES Y PROYECTOS INDUSTRIALES - Bogotá: 300 6000228 - Medellín: 300 7500033 - [email protected]
Corrosion Testing
15
Bac-PakEasy do-it-yourself test•Tests for the three most common MIC causing bacteria•Water in vial changes to color of lid, if bacteria present•
Water Test KitComplete MIC analysis through water sample•Kit comes with prepaid return envelope for analysis•Complies with NFPA 13, requiring MIC testing of the water supply•Detailed report of findings is issued within 2 weeks•
Dissolved Iron Water Test KitMonitors the effectiveness of corrosion mitigation programs•Keeps track of general corrosion within a fire sprinkler system•Degree of “Redness” of sampled water indicates level of dissolved •
iron
5-Year Deposit/Sludge Test KitDesigned to conform to the requirements of NFPA 25 requiring •
testing for MIC if slime or tubercles are discovered during an internal inspection
Kit comes with prepaid return envelope for analysis•Detailed report of findings is issued within 2 weeks•
INVERSIONES Y PROYECTOS INDUSTRIALES - Bogotá: 300 6000228 - Medellín: 300 7500033 - [email protected]
Corrosion Treatment
Potter Pipe-Shield®
Corrosion Inhibitor
Patent pending, biostatic, environmentally friendly corrosion inhibitor•Available in 5, 15, 55 and 275 gallon sizes•Developed to protect wet, dry, and pre-action fire sprinkler systems •
from MIC (Microbiologically Influenced Corrosion) and oxygen corrosionNon-regulated, non-hazardous and completely biodegradable with a •
neutral pH
PCIS-BPortable Chemical Injection System
Fully self-contained portable version of the PCDS•Durable shipping container •Can be shipped via normal carrier service•Pumps directly from chemical container into system•Weighs only 48 lbs•
PCDS-BPotter Chemical Delivery System
Metered dosing of corrosion inhibiting treatment fluid•Cabinet can house two (2) 15 gallon containers of Pipe-Shield•Optional secondary containment tank prevents chemical spills•
CDPCorrosion Dry Air Pak
Delivers moisture free air with a dew point of -40°F•Completely pre-assembled•UL/FM air maintenance device included •Fully integrated control panel•Hour meter•Oversized mufflers•30 gallon receiver•Single and three phase versions•
NGP SeriesNitrogen Generators
Slows oxygen corrosion •Ultra low dew point•Convenient, on demand generation of nitrogen•Environmentally friendly•Simple installation•
INVERSIONES Y PROYECTOS INDUSTRIALES - Bogotá: 300 6000228 - Medellín: 300 7500033 - [email protected]
Corrosion Monitoring
PAAR-BPotter Automatic Air Release (Patented)
Helps eliminate air/water interface line where corrosion often thrives•Mechanical fail safe Water Shutoff Valve•Electrically supervised Water Shutoff Valve•Visual indication of Water Shutoff Valve operation•Prevents damage from water spray, drips, or leaks from air vent•Complete unit ready to install at high points in the sprinkler system•UL listed and FM approved air vent for use on fire sprinkler branch •
lines
PCMS-RMPotter Corrosion Monitoring Station Riser Mount
For wet or dry systems•Installs on riser for easy access•3 outlets for coupons and probe•Sight glass to view internal conditions•Air inlet valve•Includes one steel and one brass coupon•Shown with optional PCMPK installed•Patent pending•Ships assembled•250 PSI rated•Allows for inspections and samples without disabling sprinkler system•
PCMPKProbe Assembly with PS10-1
Used in conjunction with any corrosion monitoring station or as a • stand alone corrosion monitoring probe
Pressure switch trips when corrosion affects probe•Provides notification when coupons need replacement•Patent pending•Probe simulates 5 years of allowable pipe loss in schedule 10 pipe •
(FM Data Sheet 2-1)
PAVPotter Air Vent
Provides automatic venting of trapped air in fire sprinkler systems•Limits oxygen corrosion when placed at the high point(s) of the •
systemsUL listed and FM approved air vent for use on fire sprinkler branch •
lines
INVERSIONES Y PROYECTOS INDUSTRIALES - Bogotá: 300 6000228 - Medellín: 300 7500033 - [email protected]
Explosion Proof Devices
18
OSYS-U-EXExplosion Proof OS & Y Switch - Universal
Installs on OS & Y valves ½”-2”•Contact rating: 15 Amps at 125 VAC, 1/2 Amp at 125 VDC•-40° to 140°F•UL listed enclosure NEMA 1, 7, 9•
VSR-FEXExplosion Proof Vane Type Waterflow Switch
NEMA 4 and 9 solid metal enclosure•0-90 second pneumatic retard•450 psi system pressure rated•Non-corrosive saddle bushing•Two ½” threaded connections for conduit•Pipe schedules 10-40 sizes 2”-8”•1-year warranty•Listings: UL, cUL, CSFM, ATEX, and FM•
PIVS-U-EXExplosion Proof Post Indicator Valve Switch
Installs on post indicator valves and butterfly valves•½” mounting nipple•Contact rating: 15 AMPS at 125 VAC, 1/2 AMP at 125 VDC•-40° to 140°F•UL listed enclosure NEMA 1, 7, 9•
PS10-EX and PS40-EXExplosion Proof Pressure Switches
NEMA 4 and 9 solid metal enclosure•250 psi system rated pressure•½” NPT male brass fitting•PS10-EX set for operation at: • • Two switches operate on pressure increase at 6 psi• • Two switches operate on pressure decrease at 5 psi•PS40-EX set for operation at: • • One switch operates on pressure decrease at 30 psi• • Second switch operates on pressure increase at 50 psi•1-year warranty•Listings: UL, cUL, CSFM, FM, NYMEA, and ATEX•
INVERSIONES Y PROYECTOS INDUSTRIALES - Bogotá: 300 6000228 - Medellín: 300 7500033 - [email protected]
Explosion Proof Devices
FSEX-24 PMRExplosion Proof Strobe
24 VDC•Corrosion resistant housing•Indoor or outdoor mounting•Polarized•Listings: UL, CSFM and MEA approved•
RMS-6T-EXP-WPExplosion Proof Pull Station
Marine & NEMA 4X rated•Weather proof•ADA compliant•Allen Key reset•DPDT switch•Screw terminal connections•Listings: UL, FM, CSFM, and NYMEA•
FHEX-24 SMRExplosion Proof Horn
24 VDC•Heavy duty, copper free cast aluminum housing•NEMA 4X, IP66 enclosure•Listings: UL and cUL•
YL6Explosion Proof Horn/Strobe
24 VDC•Low current draw•Aluminum enclosure•Flash rate of one per second•110 dB at one meter sounder•Listings: UL and cUL•
INVERSIONES Y PROYECTOS INDUSTRIALES - Bogotá: 300 6000228 - Medellín: 300 7500033 - [email protected]
Releasing Panels
PFC-4410RCWater or Agent Extinguishing Panel
4 Class B programmable initiating zones and• outputsCompatible with up to 10,000’ of Linear Heat Detection per zone•2 dedicated Class B supervisory zones•32 character LCD display, 34 LED display•20 pre-configured programs•On-board programming•40 event history buffer•Single or double interlock •Single or dual hazard•Alarm, trouble, supervisory, and waterflow relays standard•1 abort circuit•Listings: UL, ULC, FM, CSFM, and NYMEA•
PFC-6075RAddressable Releasing Panel
Built in SLC capable of supporting 75 Potter/Nohmi protocol devices•5.0 Amp 24vdc Power Supply•2 NACs each rated at 3.0 Amps max•2 I/O Circuits each rated at 1.0 Amps max•Listed for manual release abort or release circuit•Support for all major synchronization patterns•Built-in Ethernet port for programming and network connectivity•Built-in email support for system status and event information•P-Link RS-485 bus supports system accessories•1,000 event non-volatile history buffer•Listed with pre-action, deluge, and agent systems•UL listed, CSFM, NYC Fire Department Certificate of Approval•
RA-6075RLCD Annunciator
Used with PFC-6075R•32 character LCD display•Compact metal box with key lock •Identical keypad to PFC-6075R •Provides Release and Pre-Release LED’s to indicate releasing status•
MASManual Pull/Abort Station Combination
Perfect for agent suppression systems•UL, cUL Listed, FM Approved•No disassembly required•Plate mounts to box with just 2 screws•Backbox included•Optional flush mount plate•Standard with Red or Yellow agent release pull stations•Available without pull station installed for use with RMS series stations•
INVERSIONES Y PROYECTOS INDUSTRIALES - Bogotá: 300 6000228 - Medellín: 300 7500033 - [email protected]
21
MRSMain/Reserve Switch
For agent suppression systems • when uninterrupted protection is required
Complies with NFPA 12, 12A, 17, • and 2001
Provides visual indication of • connection to Main or Reserve supply
Key protected with key removable in • either position
RCDS-1Releasing Circuit Disable Switch
One N.O. key operated switch •4 Amps @ 120/240 VAC 2.5 Amps @ 125 VAC•24 VDC 50 mA•Indoor use only•Creates supervisory condition on associated release panel •Replaces software controlled disconnect•Temperature range -22°F to 140°F (-30°C to 60°C)•Complies with NFPA 72 requirements•Listings: UL and cUL•
RA-4410RC Remote Annunciator
Up to 4 annunciators can be connected to each PFC-4410RC•Rotary switches on panel and annunciator to supervise •Trouble/Supervisory buzzer•Separate LED’s for various alarms•Lamp test/buzzer silence switch•Listings: UL, cUL, CSFM, FM, and MEA•
ARM-44 Relay Module
Provides 8 Form C relay outputs•Selectable latching or common setting•Multiple operating modes•Listings: UL, cUL, CSFM, FM, and MEA when used in conjunction •
with the PFC-4410RC
Abort SwitchOne N.O. momentary contact•5 Amps @ 24 VDC (10 mA minimum)•Indoor use only•Listings: UL and FM•
Arm 1 & Arm 2Auxiliary Relay Modules
40mA at 24 VDC•10 amps resistive•120/240 VAC, 0-30 VDC•4 DPDT contacts (ARM-1)•DPDT contacts (ARM-2)•Listings: UL (PFC-4410RC), FM (PFC-4410RC)—• ARM-2 only
Releasing Panels
INVERSIONES Y PROYECTOS INDUSTRIALES - Bogotá: 300 6000228 - Medellín: 300 7500033 - [email protected]
Notification Appliances
22
Select-A-HornH-1224
33 sound output settings•Horn or chime sound output•Indoor/outdoor listed (with weatherproof back box)•Pre-wire back plate•Universal back plate mounting•Listings: UL and cUL•
Select-A-Strobe/Horn®
SH24C-3075110
Selectable 30, 75, or 110 candela•Low current draw•24 VDC input•Terminal for easy wiring•Tamper proof Select-A-Switch•Designed for wall and ceiling mount•Surface mount skirt RBX-1•Universal adapter plate SPC-1•Listings: UL, ULC, CSFM, and ADA•
Remote Mini-HornMH Series
Terminal/4-wire models•Sound output 97dB•Single gang plate•12-24 VDC and 120 VAC •15 mA current draw•Listings: UL and ULC•
Select-A-Strobe®
SL-1224
12 VDC with 15, 35, or 60 cd setting•24 VDC with 15, 35, 60, 75, 95, or 110 cd setting•6 candela settings per device•15/75 ADA compliant on 60 cd setting•Candela selection view window•Pre-wire back plate•Universal back plate mounting•Listings: UL and cUL •
INVERSIONES Y PROYECTOS INDUSTRIALES - Bogotá: 300 6000228 - Medellín: 300 7500033 - [email protected]
Notification Appliances
Remote Mini-HornHP-25 Series
Terminal/4-wire models•Sound output 97dB•Single gang plate•12-24 VDC•15 mA current draw•Temporal and non-temporal patterns•Listings: UL and ULC•
Select-A-Strobe/Horn®
SH-1224
12 VDC with 15, 35, or 60 cd setting•24 VDC with 15, 35, 60, 75, 95, or 110 cd setting•6 candela settings per device with selection view window•33 sound output settings•15/75 ADA compliant on 60 cd setting•Pre-wire back plate with universal back plate mounting•Listings: UL and cUL•
Select-A-Strobe/Horn®
SH24C-177
177 candela model •Low current draw•Terminal for easy wiring•Tamper proof Select-A-Switch•Designed for wall and ceiling mount•Sleeping Room Notification Compliant•Listings: cUL, CSFM, and ADA•
Select-A-Strobe®
SL24C
Selectable 30, 75, or 110 candela•Low current draw•Terminal for easy wiring•Tamper proof Select-A-Switch•Available 177 candela model•Designed for wall and ceiling mount•Sleeping Room Notification Compliant•Surface mount skirt RBX-1•Universal adapter plate SPC-1•Listings: UL, ULC, CSFM, and ADA•
INVERSIONES Y PROYECTOS INDUSTRIALES - Bogotá: 300 6000228 - Medellín: 300 7500033 - [email protected]
Notification Appliances
SASH SeriesSelect-A-Strobe/Horn®/Sign
SASH-12/24 VDC •SASH-120, 115 VAC•90dBA at 10 ft.•Indoor and outdoor use•Weatherproof backbox included with both models•UL Listed Strobe/Horn•
BellsPBA-AC & MBA-DC
Red powder coating finish•Sizes available: 6”, 8”, 10”•Available voltage: 24 VAC, 120 VAC, 12 VDC, 24 VDC •Service Use: fire alarm, general signal, burglar alarm•Environment: -40° to 150°F, indoor or outdoor use (outdoor use •
requires weatherproof backbox BBK-1)5-year warranty•Listings: UL, ULC (MBA bells only), CSFM, and MEA•
Sync ModulesSMD10-3A
Operates on 24 VDC 9mA•3 Amp max. output•Mounts to a 4” square box•Ability to Daisy Chain multiple devices•Listings: UL, ULC, and CSFM•
WeatherproofSelect-A-Strobe/Horn®
SH-120 Series
120 VAC operation •Low current draw•6 sound output settings•Indoor and outdoor use•Includes BBX-5 backbox•Listings: UL and CSFM•
INVERSIONES Y PROYECTOS INDUSTRIALES - Bogotá: 300 6000228 - Medellín: 300 7500033 - [email protected]
Digital Communicators
PFC-7501Fire Alarm Communicator
1.5 Amp notification circuit •500 mA auxiliary output•One class A (Style D) waterflow zone•Will support 4 zones of smoke detectors•Four class B initiating zones•Two optional Form C relays •Built-in dual phone line module with line monitoring•LCD or LED Annunciators•Fire Drill feature •Contact ID, 4-2 or DMP SDLC communication formats•Remote programmable•Available cross zoning •16.5 VAC, 12 or 24 VDC power input•Listings: UL, CSFM, and MEA•
RA-7630LCD Annunciator
32 character LCD•Programmable zone labels•Also PFC-7500 series programmer •Powered from PFC-7500 •Passcode protection or key operated•LED power indicator•Listings: UL and CSFM •
RA-7692LED Annunciator
Zone Alarm LEDs•Trouble LEDs•Power LED •System Trouble LED •Silenced LED•Full keypad•Listings: UL and CSFM•
INVERSIONES Y PROYECTOS INDUSTRIALES - Bogotá: 300 6000228 - Medellín: 300 7500033 - [email protected]
Conventional Detectors
PS-24Photoelectric Smoke Detector
Low profile 1.8”•2 or 4 wire base •Sounder & relay base available•2 built-in power alarm LEDs•With or without magnetic test (MRI Rooms)•Vandal resistant locking feature•Test feature•Base not included•Listings: UL, ULC, CSFM and FM•
BPS SeriesBaseless Smoke Residential
12 or 24 VDC•BPS-2, 2 wire baseless photo electric smoke•BPS-4, 4 wire baseless photo electric smoke•White or eggshell color•With heat available•Base not included•Listings: UL, ULC, CSFM and FM•
PS-24HPhotoelectric Smoke/Heat Detector
135°F self-restoring fixed temperature•Low profile 1.8”•Built-in power alarm LED•Vandal resistant locking base •Test feature•Base not included•Listings: UL, ULC, CSFM and FM•
Duct DetectorDSD Series
Photoelectric DSD-P•Powered by 115 VAC, 24 VAC or 24 VDC•(2) 10A Form C alarm contacts•Wide variety of remote accessories•WP-1 enclosure provides outdoor installations •
against rain, sleet, and snowComes with sampling tubes•Listings: UL and CSFM•
Sampling TubesSTS-2.5 duct sampling tube•STS-5.0 duct sampling tube•STS-10 duct sampling tube•
Heat DetectorCR-135W, CF-135W, CR-200W, CF-200W
Available in 135°F and 200°F fixed temperature or with rate of rise•Rate of rise responds to rise in temperature of approximately 15°F/min•Other models available upon request•Listings: UL, ULC, CSFM and FM•
INVERSIONES Y PROYECTOS INDUSTRIALES - Bogotá: 300 6000228 - Medellín: 300 7500033 - [email protected]
Pull Stations
Special ApplicationPull Stations
Colors available: Black, blue, green, grey, orange, • purple, red, white or yellow
Single or dual action, • single or double contactTerminal connectors•Glass breakrod•10 Amp snap action switch•Brass or chrome plating•Custom labeling in any language•Weatherproof and explosion proof models available•Made in the U.S.A.•Listings: UL, ULC, ADA, CSFM, FM and MEA•
WeatherproofRMS-1T-WP
Single or dual action•Optional key reset•Weatherproof back box included•10 Amp snap action switch•Optional auxiliary relay contacts•High gloss red enamel finish•Glass breakrod•Single or double contact•Listings: UL, ULC, ADA, CSFM and FM•
Fire Pull StationP32-1T Series*
Single or dual contact•Terminal connections•Allen Key reset•Standard single gang mounting•10 Amp snap action switch•Optional auxiliary relay contacts•High gloss red enamel finish•Glass breakrod•Surface back boxes available•Listings: UL, ULC, ADA, CSFM and FM •
Dual Action P32-1T-LP
Single contact•Allen Key reset•Standard single gang mounting•10 Amp snap action switch•Optional auxiliary relay contacts•High gloss red enamel finish•Glass breakrod•Surface and weatherproof back boxes available•Listings: UL, ULC, ADA, CSFM and FM•
*Canadian Model: P32-1TS
INVERSIONES Y PROYECTOS INDUSTRIALES - Bogotá: 300 6000228 - Medellín: 300 7500033 - [email protected]
32
SH-1224 SERIESSASH-24/120V PBA-AC SERIESMBA-DC SERIES
Residential waterflow switch applications:
VSR-SG
TO SPRINKLERS
RD13 RiserListed CPVC pipe and fittings 1” to 2” sizes
RBVS BALL VALVE SWITCHES FOR INSTALLATION ON BACKFLOW PREVENTER
TO DRAIN
DWG# 8900063-1
(VSR-ST USED WITH COPPER OR STEEL SYSTEMS)
INVERSIONES Y PROYECTOS INDUSTRIALES - Bogotá: 300 6000228 - Medellín: 300 7500033 - [email protected]
#8700021
DRY PIPE VALVE SYSTEMWATERFLOW ALARM INSTALLATION
BVLBLEEDER
VALVE
INTERMEDIATECHAMBER
DRAIN VALVE (CLOSED)TAMPERDEVICEOSYSU
OS & YCONTROL
VALVE(OPEN)
RBVS BALL VALVE SWITCH FOR
INSTALLATION ONBACKFLOW PREVENTER
PCVS-1POST
INDICATORSUPERVISORY
SWITCHNEMA 6P
PCVS-1SUPERVISORY
SWITCH NEMA 6PON BUTTERFLY
VALVE
WATER LEVEL
AIRPRESSURE
RISER TOSPRINKLER HEADS
CHECK
BALLDRIP
VALVE
PETCOCK(OPEN)
WATER BY-PASSTEST VALVE
(CLOSED)
WATERPRESSURE
GAUGE
OSYSU-1,-2SUPERVISORY SWITCH
NEMA 6P
PTS-CPLUG TYPE SUPERVISORY SWITCH
NEMA 6P
PS10-1WATERFLOW
PRESSURESWITCH
TO WATERMOTOR GONG
RBVS BALL VALVE SWITCH
RTSROOM
TEMPERATURESWITCH
WCSWATER
COLUMN SWITCH
OPEN
UT
TARGET MOVES DOWN AS VALVE IS SHUT
PS40-2SUPERVISORY
SWITCH
PS40-TMINCLUDES PS40-2 PRESSURE SWITCH, BVL BLEEDER VALVE, AND EASY TO READ, HIGH QUALITY PRESSURE GUAGE PRE-ASSEMBLED WITH GALVANIZED PIPE
Dry pipe valve system waterflow alarm installation:
INVERSIONES Y PROYECTOS INDUSTRIALES - Bogotá: 300 6000228 - Medellín: 300 7500033 - [email protected]
34
Wet pipe sprinkler systems:
VSR-S
SPRINKLER
VSR
“SHOTGUN” RISER
BRANCH LINE
ALARM CHECK VALVE
RISER TOSPRINKLER
HEADS
OPTION 2
WFSR-FPRESSURE SWITCH
WITH RETARD
PS10-2WATERFLOWPRESSURE
SWITCH
TO WATERMOTOR GONG
SHUTOFF(OPEN)
PETCOCK(OPEN)
ALARM LINESHUTOFF
VALVE,SUPERVISED
(OPEN)
WATER PRESSURE GAUGE(SYSTEM PRESSURE)
(OPEN)
CHECK VALVEUSE TO BUILD
SMALL EXCESSSURGES
BY-PASS LINE
WATER PRESSURE GAUGE(CITY PRESSURE) (OPEN)
CHECK
RBVS
DRAINVALVE
(CLOSED)
WATER BY-PASSTEST VALVE
(CLOSED)
OSYSUSUPERVISORY
SWITCH
OSY CONTROL VALVE(OPEN)
RETARDCHAMBER
PETCOCK(OPEN)
DRIPCUP
CHECKVALVE
STRAINER
DWG. #8700023-2
DRAINPIPEWATER PRESSURE
FROM CITY MAINS
BUTTERFLYCONTROL VALVE(OPEN)
PCVS-1SUPERVISORY
SWITCH
DRAIN PIPE
WATER PRESSUREFROM CITY MAINS
WET PIPE SPRINKLER SYSTEMS
#8700023
DRAINVALVE(CLOSED)
OPTION 1
INVERSIONES Y PROYECTOS INDUSTRIALES - Bogotá: 300 6000228 - Medellín: 300 7500033 - [email protected]
35
Pre-action deluge systemSingle zone/electric cross zone:
PRE-ACTION DELUGE SYSTEMSINGLE ZONE/ELECTRIC CROSS ZONE
CLOSED SPRINKLER PS10-2 OR PS40-2LOW & HIGH AIR
PRESSUREGAUGE
FROM AIR SUPPLY
BVLCR/CF SERIES HEATDETECTOR OR LINEAR
HEAT DETECTION
POTTERSMOKE DETECTOR
ZON
E 1
ZON
E 2
SUPE
RVI
SOR
Y ZO
NE
ZONE 3
PS10-1WATERFLOW
ZONE 4
POTTER FIRE ALARM BELLOR POTTER
STROBE
P32 SERIES PULL STATION
RBVS
MANUAL
OSYSU
24 VDCSOLENOID
VALVE
OS&YGATE VALVE
DELUGEVALVE
PFC-4410RC
RCDS-1 RELEASING CIRCUIT
DISABLE SWITCH
INVERSIONES Y PROYECTOS INDUSTRIALES - Bogotá: 300 6000228 - Medellín: 300 7500033 - [email protected]
A World of Solutions
INVERSIONES Y PROYECTOS INDUSTRIALES - Bogotá: 300 6000228 - Medellín: 300 7500033 - [email protected]
SFP-2402 2-Zone Control• Two Class B Initiating Device Circuits (Zones); i3 ready • One Class B Notification Appliance Circuits,
3.0 Amps and programmable strobe synchronization• Form-C Alarm and Trouble relays
Spartan-25 Panel
Conventional Panels and Communicators
SFP-2402
SFP-5UD
SFP-2404 4-Zone Control• Four Class B Initiating Device Circuits (Zones)
with Class A option module; i3 ready • Two Class B Notification Appliance Circuits,
3.0 amps expandable to 6.0 amps, with Class A option and programmable strobe synchronization
• Form-C Alarm, Trouble and Supervisory relays
SFP-5UD 5-Zone Control Communicator• Five Class B zones (Class A with option module)• Built-in digital communicator• Two Style Y/Class B NAC’s (Style 2/Class A
Option) 3.0 amps• Optional IP Communicator
SFP-2404
411 Series Communicators• Three models available:
411 – Slave Communicator411UD – Slave Communicator withup/download411UDAC – Stand-alone Communicatorwith up/download
• Up to four input channels (three on the 411)• Fully programmable with PRO-411 or with Windows®
utility (up/download models)
The 411 Series
Peripheral Devices
Addressable Devices
To Central StationOver Telephone
Network
NOT-BG12LXAddressable
Manual Pull Station
HFS-T Thermal Detector
HFS-PPhoto DetectorSLC Loop
HFS-MRRelay Module
HFS-PTPhoto/Thermal Detector
HFS-MMMonitor Module
RP-2001/RP-2002
IP Communicator• IPDACT-2/UD Fire Alarm Communicator • Eliminates standard phone line expense• Ninety second supervision of communication circuit IPDACT-2/UD
SFP-10UD
SFP-10UD 10-Zone Control Communicator• Ten Class B zones (Class A with option module)• Built-in digital communicator• Four Style Y/Class B NAC’s (Style 2/Class A
Option) 7.0 amps• Optional IP Communicator
HFS-DDuct Detector
RP Series Releasing Controls• Two models – RP-2001 for pre-action deluge,
RP-2002 for agent release• Six zones – cross zone, abort and manual release• Four Notification Appliance Circuits
– 2 for release, 2 for warning
• Twenty-five SLC points• 120/240 volt operation• Two amp power supply• Two class B NACs• Spartan HFS family of devices• Five zones• Built-in dialer• LEDs for system status; alarm, trouble, supervisory, etc. • Uses Windows Internet Explorer® for programming via laptop Ethernet port• UL/ULC/ETL listed
Spartan-25 (NSP-25)Fire Alarm Control Panel
INVERSIONES Y PROYECTOS INDUSTRIALES - Bogotá: 300 6000228 - Medellín: 300 7500033 - [email protected]
FireWarden Series
Up to Eight Speaker Circuits
FireWarden-100-2Fire Alarm Control Panel
• Integral 25-watt (single-circuit), 25 VRMS audio amplifier, expandable to50 watts (dual-circuit)
• Customization of five separate and distinct field-recorded voice messagesutilizing the integral microphone or the audio input jack
• Three-minute microphone time-out safety feature• Digital messages are field-selectable for 3,4,6,8 or infinite repeat• Built-in alert tone generators for applications where voice is not required
• Fully supervised in Standby and Active states, including integral microphone, amplifier output, message generator, speaker wiring, and tone generators
• Auxiliary power output for control modules eliminates need for excess wiring• Optional FireVoice 25/50 Zone Splitter produces up to 24 distinct speaker zones • Background music, general and telephone paging interface• Firefighter’s Telephone riser on NFV-25/50ZST
FireWarden -100-2• Single Isolated Intelligent Line Circuit (SLC) Style 4, 6 or 7• Supports 198 addressable points (99 detectors/99 modules)• 80-character LCD Backlit Display (4 lines x 20 characters)• Four Notification Appliance Circuits (NACs) with built-in synchronization • Built-in Digital Alarm Communicator Transmitter (DACT) with remote upload/download programming
and diagnostic capability (requires VFWarden-CD)• Fully programmable from local keypad, local PS-2 keyboard or PC
via VFWarden Windows® Programming Utility• Enhanced drift compensation, maintenance
alert and auto detector test features• EIA-485/ANN-BUS interface supports
up to 32 annunciators or up to eightANN-BUS devices
• Optional IP Communicator
FireVoice 25/50 Series
FireWarden-50• Single Isolated Intelligent Line Circuit (SLC)
Style 4, 6 or 7• SLC loop has 50 addressable device
capacity in any combination of addressabledetectors and modules
• Two independently programmable Class A or Class B Notification Appliance Circuits (NACs)
• Enhanced drift compensation, maintenance alert and auto detector test features
• New annunciator protocol with connections for up to eight remote devices, including 80-character LCD annunciators, remote printers, relays and graphic annunciators
• Built-in Digital Alarm Communicator Transmitter (DACT) with remote upload/download programming and diagnostic capability (PS-Tools)
• Optional IP Communicator
Peripheral Devices
Addressable Devices
To Central StationOver Telephone
Network
NOT-BG12LX AddressableManual Pull Station
NH-100 SeriesThermal Detector
NP-100 Photo Detector
2151Photo Detector
EIA-232
ANN BUS
24 VDC
SLC Loop
NC-100 Control Module
NI-100 Ion Detector
NMM-100/NMM-100P
NZM-1002-Wire DetectorMonitor Module
DNR Duct Detector
NDM-100Dual Monitor Module
NZM-100-6
FireVoice-25/50DAZS
EIA-485EIA-485
FireVoice-25/50ZSVoice Evacuation System
with Zone Splitter
PRN-6 Printer
N-ANN-80
FireWarden-50 orFireWarden-100-2
Fire Alarm Control Panel
FDU-80
INVERSIONES Y PROYECTOS INDUSTRIALES - Bogotá: 300 6000228 - Medellín: 300 7500033 - [email protected]
ONYX® Series NFS-320ONYX NFS-320Intelligent Single Loop Fire Alarm Control Panel• One Signaling Line Circuit (SLC) with 318 devices
(159 detectors and 159 modules), Style 4, 6 or 7• Four Class A/B built-in NAC (Notification Appliance Circuits)• Fully field programmable with 80-character display (includes QWERTY keypad)
or offline with VeriFireTM Tools Windows-based program utility• USB Support for VeriFire Tools• Removable chassis design for easy installation and service• EIA-485 interface supports up to 32 annunciators • ONYX Intelligent Sensing advanced set of software algorithms delivers rapid, intelligent
response to incipient fire signatures, while substantially reducing nuisance alarms• Direct connect to FireVoice 25/50 voice evacuation system• Networkable with NOTI•FIRE•NET, High Speed NOTI•FIRE•NET, and ONYXWorks®
compatible up to 200 nodes for NFN• Optional IP Communicator• Listed for releasing
PRN-6 Printer
FSP-851 Photo Detector
FAPT-851Acclimate Plus
Detector
EIA-485FSI-851
Ion Detector
NBG-12LXAddressableManual Pull
Station
DNR DuctDetector
FMM-1Monitor Module
P2RHorn/Strobe
FZM-12-Wire Detector Monitor Module
Intelligent Devices Peripheral Devices
LCD2-80
FST-851Thermal Detector
FSC-851IntelliQuadTM Multi-
criteria Detector
FSL-751 VIEWTM Detector
ACM-24AT
EIA-485
ACPS-610Addressable Charger
Power Supply
XCDGas Detector
FMM-1 CO1224T
P2RHorn/Strobe
P2RHorn/Strobe
2151Photo Detector
PF24VExitPointTM
EIA-232
Built for Speed
FireVoice-25/50ZSVoice Evacuation System
EIA-485 (Terminal)
XP Series Multi-module
INVERSIONES Y PROYECTOS INDUSTRIALES - Bogotá: 300 6000228 - Medellín: 300 7500033 - [email protected]
ONYX® Series NFS2-640ONYX NFS2-640Intelligent 1 to 2 Loop Fire Alarm Control Panel• One Signaling Line Circuit (SLC), expandable to two, Style 4, 6 or 7• 318 devices per SLC (159 detectors and 159 modules), 636 devices per panel or network node• 80-character, 640-character, or displayless (network node) operator interface options• ONYX Intelligent Sensing - nine levels of sensitivity, drift compensation and maintenance alert,
and auto detector test• 6.0 Amp switch mode power supply with four Class A/B built-in NAC (Notification Appliance Circuits)• Fully field programmable with 80-character display (includes QWERTY keypad) or offline
with VeriFireTM Tools Windows- based program utility• Optional Integrated Digital Voice Command with eight channels of high quality digital audio
and firefighter telephone on a single cable• Unique environment detection includes VIEW® for clean environments, IntelliQuadTM for detection of
all four fire signatures, and Acclimate PlusTM multi sensor that adjusts sensitivity automatically • Networkable with NOTI•FIRE•NET, High Speed NOTI•FIRE•NET, and ONYXWorks compatible
up to 200 nodes for NFN• Optional IP Communicator• Listed for releasing
FSP-851 Photo Detector
FAPT-851Acclimate Plus
Detector
FSI-851 Ion Detector
NBG-12LXAddressableManual Pull
Station
DNR DuctDetector
FMM-1Monitor Module
P2RHorn/Strobe
FZM-12-Wire Detector Monitor Module
Intelligent Devices Peripheral Devices
FST-851Thermal Detector
FSL-751 VIEW Detector
ACPS-610Addressable Charger
Power Supply
XCDGas Detector
FMM-1 CO1224T
P2RHorn/Strobe
P2RHorn/Strobe
2151Photo Detector
PF24VExitPoint
Unparalleled Agility
PRN-6 Printer
Digital or Analog Audio Loop*
EIA-232
Speaker Circuit
Digital Audio Amplifier*
Firefighter Telephone Circuit
IntegratedDigital Voice
Evacuation*640 must have an NCA-2 (not shown)
to support Digital Voice Command
FSC-851IntelliQuad Multi-criteria Detector
EIA-485
FDU-80
ACM-24ATEIA-485
XP Series Multi-module
INVERSIONES Y PROYECTOS INDUSTRIALES - Bogotá: 300 6000228 - Medellín: 300 7500033 - [email protected]
ONYX® Series NFS2-3030ONYX NFS2-3030Intelligent 1 to 10 Loop Fire Alarm Control Panel• Up to 10 Signaling Line Circuits Style 4, 6 or 7• Point Capacity: Up to 159 detectors (any mix of ion, photo, laser photo, thermal, or multsensor)
and 159 modules (pull stations, two-wire smoke, monitor, control or relay modules) per SLC• Large 640-character LCD backlit display (16 lines x 40 characters) or displayless (a node on a network)• Networkable with NOTI•FIRE•NET, High Speed NOTI•FIRE•NET, and ONYXWorks compatible
up to 200 nodes for NFN• Application code is saved in Flash memory• Built-in Degraded Mode option. In the event of a CPU failure, the loop control modules will continue
to monitor fire alarm conditions• ONYX Intelligent Sensing advanced set of software algorithms delivers rapid, intelligent response
to incipient fire signatures, while substantially reducing nuisance alarms including nine levelsof alarm and pre-alarm, cooperative sensing and self-optimizing pre-alarm
• Optional integrated Digital Voice Command with eight channels of high quality digital audio and fivechannels of fire fighter’s telephone, all on a single riser
• EIA-485 annunciators, including custom graphics• Optional IP Communicator• FM6320 approved gas detection system• Listed for releasing
PRN-6 Printer
FSP-851 Photo Detector
FAPT-851Acclimate Plus
Detector
FSI-851 Ion Detector
NBG-12LXAddressableManual Pull
Station
DNR DuctDetector
FMM-1Monitor Module
P2RHorn/Strobe
FZM-12-Wire Detector Monitor
Module
Intelligent Devices Peripheral Devices
FST-851Thermal Detector
FSL-751 VIEW Detector
ACPS-610Addressable Charger
Power Supply
FMM-1 CO1224T
P2RHorn/Strobe
P2RHorn/Strobe
2151Photo Detector
PF24VExitPoint
EIA-232
SCS Smoke Control Station Custom GraphicsAnnunciator
ACM-24AT
EIA-485
EIA-485
Digital or Analog Audio Loop
Audio
Rise
rsPh
one
Rise
rsTo
XPI
Q Tr
ansp
onde
r
Speaker Circuit
Digital Audio Amplifier
Firefighter Telephone Circuit
Speaker Circuit
Digital Audio Amplifier
Firefighter Telephone Circuit
Sheer Power and Performance
IntegratedDigital Voice
Evacuation
FMM-4-20XCD
Gas Detector
FSC-851IntelliQuad Multi-criteria Detector
LCD-160 DisplayLCD2-80*
* RDP port can support LCD-160 or LCD-80 inTerminal Mode, but not both at the same time
XP Series Multi-module
INVERSIONES Y PROYECTOS INDUSTRIALES - Bogotá: 300 6000228 - Medellín: 300 7500033 - [email protected]
Networking and Integration
Unified Commandand Control
Eche
lon
NOTIFIER Fire Panels Competitive Fire Interface
Ademco Vista SecurityCCTV IntegrationNetwork Printer
IP
DACR
NOTIFIER Fire Panels FirstVisionTM
DACR
Fire and Security Panels with DACT
ONYXWorks Workstation
FirstVisionTM
NCA-2
NWS
NOTIFIER Fire Panels
Additional Network Literature• Network & Integration Product Applications Guide• ONYXWorks Integrated Facilities Monitoring System
Telco Lines
NOTI•FIRE•NETTM Features• Supports ONYX Series (NFS-320, NFS-640, NFS2-640, NFS-3030, NFS2-3030) and Digital Voice Command• Backward compatible to NOTIFIER classic series of Fire Alarm Control Panels (AFP-200, AFP-300, AFP-400, AFP-1010 and AM2020)• Network Control Annunciator (NCA-2) is used to annunciate network events, and provide network control• BACnet Gateway supports industry standard BACnet/IP connectivity to Building Automation Systems (BAS/BMS)• Modbus Gateway supports industry standard Modbus/IP connectivity
to industrial control systems• NOTI•FIRE•NET Web Server (NWS) provides remote read status
capabilities and instant email and text messaging • ONYX FirstVision intuitive touch screen display for first responders• Wire and Multi-Mode Fiber options
High Speed NOTI•FIRE•NETTM Features• Supports ONYX Series (NFS-320, NFS-640, NFS2-640, NFS-3030, NFS2-3030),
NCA-2 and Digital Voice Command• Supports BACnet Gateway, Modbus Gateway, NWS and FirstVision Applications• Increased network protocol communications; 12Mb VDSL for Wire and 100Mb
for Multi-Mode Fiber and Single-Mode Fiber• Increased node count to 200 nodes including digital audio applications
ONYXWorks® Features• Supports a client-server technology based on Echelon and a NOTI•FIRE•NET
peer-to-peer network• Integrates competitive Fire Alarm Control Panel interfaces, security panels
and CCTV applications• Connects new and existing equipment into a Local Area Network (LAN)
or Wide Area Network (WAN)• Supports Digital Alarm Communicator Receiver (DACR) interface
for monitoring of remote panels• Graphic Editing mode allows for on-site programming of floor plan
screens, devices and navigational buttons• Windows XP Support
TM
INVERSIONES Y PROYECTOS INDUSTRIALES - Bogotá: 300 6000228 - Medellín: 300 7500033 - [email protected]
For over 60 years, NOTIFIER has been a leader in the fire alarm industry. Today, we arethe largest manufacturer of engineered fire alarm systems with over 400 distributorsworldwide, and regional support operations on every continent for the flexibility andoptions your business needs.
NOTIFIER - Leaders in Life. Safety. Technology.
NOTIFIER WORLD HEADQUARTERS12 Clintonville RoadNorthford, CT 06472United States of AmericaTel: 203-484-7161Fax: 203-484-7118www.notifier.com
For information on regional office locations throughout the world, please visit www.notifier.com.
Fire AlarmControl Panels
EmergencyCommunicationsSystems
Fire AlarmNetworks
Advanced Fire &Smoke Detection
Fire, Security, CCTVIntegration
Gas Detection
INVERSIONES Y PROYECTOS INDUSTRIALES - Bogotá: 300 6000228 - Medellín: 300 7500033 - [email protected]
VESDA by Xtralis
The World’s No. 1 Brand of Aspirating
Smoke Detector (ASD)
The World’s No. 1 ASD brand
VESDA by Xtralis very early warning smoke detection solutions provide the earliest possible warning of an impending fire hazard. VESDA buys time to investigate an alarm and initiate an appropriate response to prevent injury, property damage or business disruption. And because VESDA has the industry’s widest sensitivity range and multi-level warnings, even minute levels of smoke can be detected before a fire has time to escalate.
As the No. 1 ASD brand specified by fire professionals around the world, VESDA is synonymous with reliable, high performance fire detection.
This diagram shows the progression of a fire over time. Note that the incipient stage of a fire provides the widest window of opportunity to detect and control the spread. VESDA detectors can be configured to generate multiple alarms within the incipient stage. They also can be configured to generate an additional alarm (Fire 2) in the advanced stages of a fire. This feature is unique to VESDA and takes advantage of its wide sensitivity range that enables one detector to monitor the entire progression of a fire.
How VESDA works
VESDA works by continuously drawing air into a distributed pipe network via a high-efficiency aspirator. The air sample then passes through a dual-stage filter. The first stage removes dust and dirt from the air sample before it enters the laser detection chamber. The second, ultra-fine stage provides an additional clean-air supply to keep the detector’s optical surfaces free from contamination, ensuring stable calibration and long detector life as well as minimizing nuisance alarms.
From the filter, the air sample goes through the calibrated detection chamber where it is exposed to a laser light source. When smoke is present, light is scattered within the detection chamber and is instantly identified by the highly sensitive receiver system. The signal is then processed and presented via a bar-graph display, alarm threshold indicators and/or graphic display. VESDA detectors are able to communicate this information to a fire alarm control panel, a software management system, or a building management system via relays or a High Level Interface (HLI).
spirating
7 Reasons for
VESDA
When business continuity is paramountWhen smoke is difficult to detectWhen maintenance access is difficultWhen unobtrusive detection is requiredWhen evacuation is a challengeWhen environmental conditions are difficultWhen suppression systems are present
1
2
3
4
5
6
7
Industrial VESDA VLI VESDA VFT VESDA VLP VESDA VLS
INVERSIONES Y PROYECTOS INDUSTRIALES - Bogotá: 300 6000228 - Medellín: 300 7500033 - [email protected]
VESDA Product Range
VVVVESSDDDAAA VVVLLI: An industrial-strength detector that boasts a ruggedized enclosure providing protection against dust and water spray and incorporates an industry-first, patented, fail-safe, “intelligent filtration” technology designed to reduce contamination that might enter a detector, improving detector longevity and reducing service and maintenance. VVVVESSDDDAAA VVVFFT: A unique and versatile high-sensitivity ASD that is able to pinpoint the source of incipient smoke to speed response, enhance investigation, and minimize business disruption and downtime. The VFT provides intelligent addressability to identify up to 15 protected areas.VVVVESSDDDAAA VVVLLP (((LLaassserrPPPLLUUSSS™™): The VESDA VLP detects fire at the earliest possible stage and reliably measures very low to extremely high concentrations of smoke. It has the world’s widest sensitivity range of 0.0015 to 6% obs/ft. (0.005 to 20% obs/m) and supports four configurable alarms, protecting areas up to 20,000 sq. ft. (2,000 m2).VVVVESSDDDAAA VVVLLSS (((LLaassserrSSSCCAANNNNEEERR™):: The VESDA VLS locates the origin of smoke by identifying the first sector (pipe) with the highest level of smoke and then continues to sample air from all sectors to monitor fire growth. The VESDA VLS also provides four alarm levels for each individual pipe and provides individual pipe addressability and settings. It protects areas up to 20,000 sq. ft. (2,000 m2).VVVVESSDDDAAA VVVLLCC ((LLaassserrCCCOOOMMMPPPACCCCTT™):) The VESDA VLC offers cost-effective protection of single environments and small areas. It offers the same wide sensitivity range as the VESDA VLP and VESDA VLS and supports three configurable alarm levels. It is available in two versions; one version interfaces via relays only (RO) and the other across either relays or VESDAnet (VN). An explosion-proof version of the VN VLC is also available.VVVVESSDDDAAA VVVLLF (((LLaassserrFFFOOCCUSS™))):: The VESDA VLF delivers the most advanced and cost-effective ASD technology for small environments. The VESDA VLF-250 protects areas up to 2,500 sq. ft. (250 m2), and the VESDA VLF-500 covers up to 5,000 sq. ft. (500 m2). In addition to the features found in all VESDA products, the VESDA VLF provides a new range of features and built-in intelligence for quick installation, commissioning and servicing.RRRRemmooottee DDiisppplayyys aannnddd PPPrrroggggrraammmeeerrs:: The VESDA display module monitors and reports the status of a detector, providing visual representation of smoke levels along with all alarm and fault conditions. The menu-driven VESDA Programmer allows the user to conveniently configure, commission and maintain the VESDA system, as well as program each individual detector. VVVVESSDDDAAAneettt™: VESDAnet is a comprehensive, fault-tolerant, “closed,” two-wire communications loop that links VESDA detectors, displays, programmers and remote units on a daisy-chained loop. It enables a number of units to be programmed together from one or more locations and automatically detects communication failures. It also easily interfaces with systems external to the network, such as intelligent fire alarm panels and building management systems.VVVVESSDDDAAA PPPipppe:: A key element in the performance of a VESDA ASD system is the network of sampling pipes that actively transports air from a protected area to the detector. Xtralis offers an extensive range of pipe and fittings to suit all application needs.VVVVSMM™™™: A software package that allows the user to monitor, configure and control a VESDA system from a central location via a VESDAnet communication loop or directly to VESDA detectors. VVVVSCC™™:: A software package that can be used to configure, install, commission and maintain the standard range of VESDA ASDs. The software provides high-level programming flexibility through its on-line and off-line configuration capabilities. VVVVESSDDDAAA AAASSPIRREE222™: The latest version of VESDA sampling pipe network design and modeling software. It aids in the design and evaluation process for basic to very complex pipe-network layouts.For detector configuration comparison, refer to document #18327 on our web site.
Applications
• Accommodation (Apartments, Hotels, Shops and Offices)
• Correctional Facilities• Clean Rooms• Cold Storage• Cultural/Heritage• Data & Telecom• Hospitals and Healthcare• Insurance• Marine• Nuclear Facilities• Oil & Gas• Portable Switch Rooms• Power Generation• Records Storage• Transportation • Wind Power Generation• Warehousing
Approvals
UL USACFE ChinaBOMBA Malaysia ULC CanadaONORM AustriaVNIIPO RussiaBureau Veritas Marine Division FranceConformite Europeene EU (EMC)HK Fire Services Hong Kong(SMA) C-Tick AustraliaCSFM USACTIVFIRE AustraliaFM Global WorldwideAFNOR FranceLloyds Register LPCB WORLDWIDE EN 54-20ITS UKINTYG SwedenEC/CPD EN 54-20FDA Laser Safety USAFM-Hazardous Areas Global WorldwideVdS EuropeNY-MEA USA
VESDA VLC VESDA VLF VESDA Remote Display Modules VESDA Ex d
INVERSIONES Y PROYECTOS INDUSTRIALES - Bogotá: 300 6000228 - Medellín: 300 7500033 - [email protected]
The World's No. 1 Brand
of Aspirating Smoke Detector
INVERSIONES Y PROYECTOS INDUSTRIALES - Bogotá: 300 6000228 - Medellín: 300 7500033 - [email protected]
When business continuity is paramountIs uptime a key business goal? Is service provision critical?
VESDA by Xtralis very early warning smoke detectors provide the earliest warning of a potential fire that buys time to investigate, intervene and potentially avoid business disruption in addition to the damage, downtime and cost of a suppression release. Such early warning is critical for:
• Telecommunications facilities • Server rooms
• Financial data centers • Utilities
• Clean rooms • Power generation facilities
When smoke is difficult to detectIs high airflow diluting smoke, preventing it from reaching the ceiling so it can be detected? Is the smoke being trapped in ducts, pockets or voids? Is smoke stratifying into a mushroom cloud below a high ceiling, making it difficult to detect? VESDA sampling points can be placed at the return air grill or in equipment cabinets to detect smoke as it is carried by the air. In large, open spaces, sampling points for VESDA detectors can be placed where smoke goes — often some distance below ceiling level. Suitable for:
• Server rooms • Clean rooms
• Telecommunications facilities • Warehouses
• Atriums • Indoor stadiums
• Theaters • Convention centers
When maintenance access is difficult Is the area to be protected inaccessible? Does maintenance on current fire protection systems cause disruptions and inconvenience your business? VESDA detectors can be mounted in accessible locations to enable easy maintenance. Only the sampling pipe network is placed in the inaccessible area. Ideal for:
• Ceiling voids and sub-floor spaces • Prisons and detention facilities
• Elevator shafts • Ducts
• Production areas
7 Reasons for VESDA
1
2
3
INVERSIONES Y PROYECTOS INDUSTRIALES - Bogotá: 300 6000228 - Medellín: 300 7500033 - [email protected]
4
When unobtrusive detection is requiredIs it important to preserve the internal design/decoration of the building? Is vandalism a problem with the current smoke detection system?
A VESDA system can be installed with tiny capillary sampling tubes, which are barely discernible to the human eye. The detectors can be placed in a cupboard or utility area. Great for:
• Modern offices • Heritage buildings
• Cathedrals • Prisons and detention centers
• Art galleries and museums • Prestigious residences
When evacuation is a challenge Will the building be open to the general public? Will it house people who need extra help during an evacuation? Is evacuation difficult due to crowds or limited exits? What is the business impact of an evacuation? The very early warning that a VESDA system provides allows the maximum time for evacuation. This is critical for:
• Shopping centers • Hospitals
• Stadiums • Underground tunnels
• Heritage buildings • Facilities for children and the elderly
When environmental conditions are difficult Is poor air quality, extreme temperatures or industrial activity present in the area to be protected?VESDA VLI detector, with its ruggedized enclosure and patented long-life, fail-safe intelligent filter technology, is specifically designed for industrial applications with harsh and difficult environments. The VLI detectors can be installed within the sampling area or remote from the detection area with only the sampling pipes located in the protected area. The sampled air can be filtered, warmed or cooled before reaching the detector. Ideal for:
• Mines • Water treatment plants
• Manufacturing and processing plants • Fertilizer plants
• Power generation facilities • Textile plants
• Timber, pulp and paper plants • Transportation
When suppression systems are present Is suppression release costly and disruptive?
The very early warning provided by a VESDA system allows early intervention to prevent suppression releases. The multiple warning levels of a VESDA system can be used to trigger different responses at different stages of a fire — from controlling air conditioning to initiating a suppression release. Applicable for:
• Communications hubs • Server rooms
• Command stations • Switch rooms
5
6
7
INVERSIONES Y PROYECTOS INDUSTRIALES - Bogotá: 300 6000228 - Medellín: 300 7500033 - [email protected]
VESDA by Xtralis Aspirating Smoke Detection (ASD)The world's no. 1 ASD brand VESDA by Xtralis very early warning smoke detection solutions provide the earliest possible warning of an impending fire hazard. VESDA buys time to investigate an alarm and initiate an appropriate response to prevent injury, property damage or business disruption. And because VESDA has the industry’s widest sensitivity range and multi-level warnings, even minute levels of smoke can be detected before a fire has time to escalate.
As the No. 1 ASD brand specified by fire professionals around the world, VESDA is synonymous with reliable, high-performance fire detection.
How VESDA worksVESDA works by continuously drawing air into a distributed pipe network via a high-efficiency aspirator. The air sample then passes through a dual-stage filter. The first stage removes dust and dirt from the air sample before it enters the laser detection chamber. The second, ultra-fine stage provides an additional clean-air supply to keep the detector’s optical surfaces free from contamination, ensuring stable calibration and long detector life as well as minimizing nuisance alarms.
From the filter, the air sample goes through the calibrated detection chamber where it is exposed to a laser light source. When smoke is present, light is scattered within the detection chamber and is instantly identified by the highly sensitive receiver system. The signal is then processed and presented via a bar-graph display, alarm threshold indicators and/or graphic display. VESDA detectors are able to communicate this information to a fire alarm control panel, a software management system, or a building management system via relays or a High Level Interface (HLI).
This diagram shows the progression of a fire over time. Note that the incipient stage of a fire provides the widest window of opportunity to detect and control the spread. VESDA detectors can be configured to generate multiple alarms within the incipient stage. They also can be configured to generate an additional alarm (Fire 2) in the advanced stages of a fire. This feature is unique to VESDA and takes advantage of its wide sensitivity range that enables one detector to monitor the entire progression of a fire.
INVERSIONES Y PROYECTOS INDUSTRIALES - Bogotá: 300 6000228 - Medellín: 300 7500033 - [email protected]
VFT
VLP
VLS
VLC
VLF
Ex d
VESDA VLIThe VESDA VLI is an industrial-strength detection category that will benefit customers in critical but often harsh environments. With its patented, innovative technology, the VESDA VLI sets a new benchmark for reliable, absolute smoke detection in industrial applications including mining, manufacturing, processing plants, petrochemical plants, power generation facilities, waste treatment plants and more.
VESDA VFTThe VESDA VFT is a unique and versatile high-sensitivity ASD that is able to pinpoint the source of incipient smoke to speed response, enhance investigation, and minimize business disruption and downtime. This advanced detector provides intelligent addressibility to identify up to 15 protected areas via microbore aspirating tubes.
VESDA VLP (LaserPLUSTM)The VESDA VLP is the most popular detector in the VESDA by Xtralis product range. Like all VESDA ASDs, it detects fire at the earliest possible stage and reliably measures very low to extremely high concentrations of smoke. It has the world’s widest sensitivity range of 0.005 to 20% obs/m (0.0015 to 6% obs/ft ). VESDA VLP supports four configurable alarms (Alert, Action, Fire 1 and Fire 2) and protects areas up to 2,000 m2 (20,000 sq. ft.).
VESDA VLS (LaserSCANNERTM)The VESDA VLS locates the origin of smoke by identifying the first sector (pipe) with the highest level of smoke and then continues to sample air from all sectors to monitor fire growth. The VESDA VLS also provides four alarm levels for each individual pipe (Alert, Action, Fire 1 and Fire 2) and provides individual pipe addressability and settings. It protects areas up to 2,000 m2 (20,000 sq. ft.).
VESDA VLC (LaserCOMPACTTM)The VESDA VLC offers cost-effective protection of single environments and small areas. It offers the same wide sensitivity range as the VESDA VLP and VESDA VLS — 0.005 to 20% obs/m (0.0015 to 6% obs/ft). The VESDA VLC supports three configurable alarm levels (Alert, Pre-Alarm and Fire) and comes in two versions. One version interfaces via relays only (RO) and the other across either relays or VESDAnet (VN). In addition, an explosion-proof version of the VN VLC is available for the protection of hazardous areas.
VESDA VLF (LaserFOCUSTM)The VESDA VLF delivers the most advanced and cost-effective aspirating smoke detection technology for small environments. The VESDA VLF-250 model protects areas up to 250 m2 (2,500 sq. ft.), and the VESDA VLF-500 model covers up to 500 m2 (5,000 sq. ft.). In addition to the features found in all Xtralis Laser products, VESDA VLF provides a new range of features and built-in intelligence for quick installation, commissioning and servicing.
Remote Displays and ProgrammersThe VESDA display module monitors and reports the status of a detector, providing visual representation of smoke levels along with all alarm and fault conditions. For monitoring convenience, multiple displays can be associated with a single detector.
The menu-driven VESDA Programmer allows the user to conveniently configure, commission and maintain the VESDA system, as well as program each individual detector. Only one programmer is needed to support the entire network.
Display and programmer modules can be mounted in a detector unit separately (connected via VESDAnet), in a single remote mounting box, or in a 19-inch sub rack.
VESDA by Xtralis Product Range
VLI
INVERSIONES Y PROYECTOS INDUSTRIALES - Bogotá: 300 6000228 - Medellín: 300 7500033 - [email protected]
VESDA by Xtralis Product RangeVESDAnetTM
VESDAnet is a comprehensive, fault-tolerant, “closed,” two-wire communications loop that links VESDA detectors, displays, programmers and remote units on a daisy-chained loop. VESDAnet enables a number of units to be programmed together from one or more locations and automatically detects communication failures.
It also easily interfaces with systems external to the network, such as intelligent fire alarm panels and building management systems.
VESDA PipeA key element in the performance of a VESDA ASD system is the network of sampling pipes that actively transports air from a protected area to the detector. VESDA offers an extensive range of pipe and fittings to suit all application needs, ensuring a quality system is installed every time.
Some pipes and fittings are not available in certain countries. Please check with an Xtralis office before you order.
VSM4TM
The VSM software package allows the user to monitor, configure and control a VESDA system from a central location via a VESDAnet communication loop or directly to VESDA detectors. Real-time and historical events for a single detector or multiple networks of detectors can be collected over a local- or wide-area network. The data then can be processed and presented in either report or graphical format — even graphically on site floor plans.
VSCTM The VSC software package can be used to configure, install, commission and maintain the standard range of VESDA ASDs. The software provides high-level programming flexibility through its on-line and off-line configuration capabilities. Rapid diagnostic abilities, concurrent configuration views, compare/merge functionality, and simultaneous smoke-trend graphing of multiple detectors are additional features designed to simplify operation and installation setup.
VESDA ASPIRE2TM
VESDA ASPIRE2 is the latest version of VESDA sampling pipe network design and modeling software. It aids in the design and evaluation process for basic to very complex pipe-network layouts. Key features, such as design wizards, 3-D isometric views, an automated design verification process, and a new AutoBalance capability, ensure that a tailored pipe layout is easily achieved. The Installation Data Pack (IDP) generates a series of reports with the parameters, required materials and expected system performance so installation and commissioning engineers receive this information clearly.
SoftwareVSM4, VSC and ASPIRE2 are compatible with all detectors in the VESDA product line
INVERSIONES Y PROYECTOS INDUSTRIALES - Bogotá: 300 6000228 - Medellín: 300 7500033 - [email protected]
Document 11273_08
About Us
The Americas +1 781 740 2223
Asia +852 2916 8894
Australia and New Zealand +61 3 9936 7000
Continental Europe +32 56 24 19 51
UK and the Middle East +44 1442 242 330
Xtralis is a leading global provider of powerful, early warning fire detection and security solutions that prevent disasters by giving users time to respond before life, critical infrastructure or business continuity is compromised. We protect more than 40,000 customer sites in 100 countries, including billions in assets belonging to the world’s top governments and businesses. Our solutions include VESDA® by Xtralis – very early warning fire detection, ICAM® by Xtralis – flexible fire and environmental monitoring, ADPRO® by Xtralis – outdoor and enterprise security, and ASIM® by Xtralis – traffic detection.
Xtralis is the leader in very early warning fire detection and invented the VESDA aspirating smoke detector (ASD), the world's No. 1 ASD brand. Customers worldwide rely on VESDA by Xtralis when business continuity is imperative, environments are challenging, and time is required to ensure safe and orderly evacuation.
VESDA detectors are available in a variety of models to accommodate a broad range of environments and applications. From small to very large, open spaces and from the cleanest to the dirtiest of environments, VESDA provides reliable, high-sensitivity, very early smoke detection.
The contents of this document are provided on an “as
is” basis. No representation or warranty (either express
or implied) is made as to the completeness, accuracy
or reliability of the contents of this document. The
manufacturer reserves the right to change designs or
specifi cations without obligation and without further
notice. Except as otherwise provided, all warranties,
express or implied, including without limitation any
implied warranties of merchantability and fi tness for a
particular purpose are expressly excluded.
This document includes registered and unregistered
trademarks. All trademarks displayed are the trademarks
of their respective owners. Your use of this document
does not constitute or create a licence or any other right
to use the name and/or trademark and/or label. This
document is subject to copyright owned by Xtralis AG
(“Xtralis”). You agree not to copy, communicate to the
public, adapt, distribute, transfer, sell, modify or publish
any contents of this document without the express prior
written consent of Xtralis.
Doc. 11273_11
INVERSIONES Y PROYECTOS INDUSTRIALES - Bogotá: 300 6000228 - Medellín: 300 7500033 - [email protected]