Fichas Tecnicas ROA 1

26
Observatorio Movilidad sostenible: Julián Rojas Jorge Sanabria ROA1 - Vehiculo Urbano Profesor: Paulo Romero UNAL | Facartes | Diseño Industrial

description

Observatorio de Movilidad Sostenible / Universidad Nacional de Colombia / Facultad de Artes / Diseño Industrial / 2011

Transcript of Fichas Tecnicas ROA 1

Page 1: Fichas Tecnicas ROA 1

ObservatorioMovilidad sostenible:

Julián RojasJorge Sanabria

ROA1 - Vehiculo Urbano

Profesor: Paulo RomeroUNAL | Facartes | Diseño Industrial

Page 2: Fichas Tecnicas ROA 1

Fuente :

ROA1

Proyecto reto de Observación y

Apliación.

VehiculoUrbano

01

Seattle Sperm Bank

Una curiosa bicicleta con forma de esper-matozoide hace las delicias de quienes transitan por la cuna del Grunge. Se trata del medio de trasporte para el semen humano depositado en el Seattle Sperm Bank, en donde se optó por la forma más sustentable de funcionamiento que se relacione a la maravillosa misión de dar vida, aunque sea por medio de insemina-ción arti�cial.

Es así como el viaje de la semilla se empapa de un sentido ecológico y natural.

http://www.veoverde.com/2011/12/seattle-sperm-bank-utiliza-bicicletazoide-para-el-transporte-de-semillitas/

Page 3: Fichas Tecnicas ROA 1

Fuente :

ROA1

Proyecto reto de Observación y

Apliación.

VehiculoUrbano

02

Multicóptero

Si tú también eres de los que ha soñado con volar, alégrate porque pronto será una realidad. El multicóptero, un medio de transporte poco común, está impulsado por 16 aspas y soporta hasta 80 kilogramos de carga. Aunque no sea tan práctico como un par de alas te dará la oportunidad de volar de un lado a otro de manera segura.

Este so�sticado pero extraño aparato, que se espera pueda utilizarse como un “taxi personal” o auxiliar en operaciones de búsqueda y rescate, permite elevarse en el aire para recorrer distancias signi�cativas y es dirigido por medio de una palanca tipo joystick.

Su vuelo inaugural fue corto, en distancia y tiempo, pues aún es un prototipo pero se espera que para el próximo año este concepto ya haya sido aterrizado en algo más funcional y duradero. Es totalmente alimentado por baterías de litio, una gran diferencia entre otros motores personales que utilizan gasolina, y aunque a primera vista parezca inestable es muy seguro, según dice Alexander Sozel de eVolo, los creadores de esta revolucionaria máquina.

Aquí hay un video del primer vuelo que se realizó con este prototipo. Falta ver cómo quedará el diseño �nal pero esperemos que esté a la altura de nuestras expectativas.

http://www.veoverde.com/2011/11/multicoptero-no-son-alas-pero-podras-volar/

Page 4: Fichas Tecnicas ROA 1

Fuente :

ROA1

Proyecto reto de Observación y

Apliación.

VehiculoUrbano

03

Multicóptero

Se trata de Vélo, el automóvil solar y a tracción humana que podrán conocer todos quienes acudan de forma gratuita al Punto Verde.

Veló propone una futura alternativa al automóvil para trayectos cortos, con un bajísimo costo y sin contaminar, que incorpora las características y usabilidad de un city car convencional.

Veló tiene una cabina textil que protege a sus usuarios de las inclemencias ambien-tales, al mismo tiempo que permite enfriar el panel fotovoltaico para su mejor desem-peño. La cobertura textil soporta a la vez una imagen grá�ca costumizable, de acuerdo a la necesidad de identi�cación urbana del vehículo y sus usuarios.

El vehículo es un desarrollo en el ámbito de movilidad sostenible generado por un grupo interdisciplinario de expertos ingeniería ambiental, diseño, ergonomía y arte de la Universidad Andrés Bello.

http://www.veoverde.com/2011/12/chile-velo-el-vehiculo-solar-y-a-traccion-humana-estara-este-�n-de-semana-en-feria-verde/

Page 5: Fichas Tecnicas ROA 1

Fuente :

ROA1

Proyecto reto de Observación y

Apliación.

VehiculoUrbano

04

Ecocamper

Este impresionante modelo, fue creado por el diseñador industrial franco canadiense Alexandre Verdier, quien cree que la solución a los problemas medioam-bientales “reside en la inteligencia, el diseño simple y el uso de la tecnología para usar mejor los recursos naturales”. Esta eco camper cuenta con un motor híbrido, paneles solares y muchos otros eco-gadgets en su interior.

Existen cinco modelos de la Verdier Solar Powered Camper, aunque todas vienen equipadas igual: Un motor híbrido de cuatro cilindros que funciona a través de un panel solar de 170 W en el techo. Además, el panel viene con un sistema GPS que controla su orientación para optimizar su captura de energía. También cuenta con una muy buena sala de pelícu-las con un proyector, una pantalla y seis parlantes que forman un sistema surround. En el asiento del copiloto, hay instalado un computador que sirve para ir chequiando el clima o la mejor ruta a seguir.

http://www.veoverde.com/2011/01/eco-gadgets-la-camper-que-siempre-sonaste/

Page 6: Fichas Tecnicas ROA 1

Fuente :

ROA1

Proyecto reto de Observación y

Apliación.

VehiculoUrbano

05

Peugeot one

Peugeot One is a “green” concept car, designed by Omar Ivan Huerta Cardoso and it aims to change the way people see automobiles in relation with the environ-ment. The vehicle accumulates solar energy with the aid of its windshield, imitating the Photosynthesis process and going easy on Mother Nature, by not releasing dangerous substances in the air.

This concept car is a single-seater, an urban vehicle that uses a Gyroscope system to generate stability and a pretty nifty suspension system that handles a sudden stop quite well, by cushioning the body of the car.

I have to say that this is quite a long automobile that will be a real pain to park, unless it comes with a foldable mecha-nism, like the BRB concept car.

http://www.conceptam.com/peugeot-one-concept-car/

Page 7: Fichas Tecnicas ROA 1

Fuente :

ROA1

Proyecto reto de Observación y

Apliación.

VehiculoUrbano

06

OPEL ICONA

PThe vehicle developed in the project is intended to take a more important role in familys lives by the year 2050. This V shaped car is able to commute in both water and land opening the possibilities to look for alternative locations to reside and experiences to explore. Moreover, the vehicle has features that make it environ-mentally friendly and energy e�cient, that, as a whole provide a dynamic and practical way to teach children about relevant issues by living memorable experiences that reinforce the family bond. Below the paper discusses two of the main challenges that society will be forced to face by the year 2050, followed by the involvement of the vehicle and how it becomes a tool that can be used to contribute to the solution.

http://www.behance.net/gallery/OPEL-ICONA/685989

Page 8: Fichas Tecnicas ROA 1

Fuente :

ROA1

Proyecto reto de Observación y

Apliación.

VehiculoUrbano

07

PEUGEOT EVE

EVE is a car designed from an environmen-tal perspective under a aesthetic PEUGEOT guideline .EVE was designed as a three-seat vehicle that allows individual citizens that owns each EVE, take care and encouraging the environment.

EVE is the �rst intelligence vehicle with own personality and itself character. When is acquires, and the owner have the �rst contact with EVE, it acquires a unique character and compatible, to the owner. The nano materials used in the body allows to EVE to change its color acording to the humor of the driver, also the EVE´s computer recognizes the beat of the music that is playing and changes its color, generating by this way an enviroment that envelop the driver in a great atmosphere, acording to the music and the humor´s driver.

http://www.behance.net/gallery/Peugeot-EVE/287090?utm_source=network&utm_medium=project_footer&utm_campaign=project_footer_references

Page 9: Fichas Tecnicas ROA 1

Fuente :

ROA1

Proyecto reto de Observación y

Apliación.

VehiculoUrbano

08

Scarab

Urban mobility vehicle (project initiated in 2008)

Winner of the Michelin Challenge Design 2010.The aim of this project was to develop guidelines and a holistic solution for a new system of urban transport, composed of vehicle and infrastructure, in a sustainable way and adaptable to various urban environments.

http://www.behance.net/gallery/Scarab/145722

Page 10: Fichas Tecnicas ROA 1

Fuente :

ROA1

Proyecto reto de Observación y

Apliación.

VehiculoUrbano

09

A.N.T. Aid Necessities Transporter

In this mode, the vehicle will be travelling into the disaster a�ected area carrying much needed supplies. Travelling in groups, these vehicles will e�ciently journey through hazardous and rough terrain. Although in this mode, the vehicle may not be able to travel as fast as its other mode due to the weight, it is still able to utilize its all terrain capabilities and hence arrive to its destination fast. Due to the headpiece rotated upwards, its aesthetics are totally changed from its other mode. The vehicle now looks more authoritative, grounded and safe, giving the impression that it is on a mission.

http://www.behance.net/gallery/ANT-Aid-Necessities-Transporter/597216

Page 11: Fichas Tecnicas ROA 1

Fuente :

ROA1

Proyecto reto de Observación y

Apliación.

VehiculoUrbano

10

Flux

La usabilidad y la ergonomía son un tema importante en que se centra este vehículo en todo el usuario único. En una compara-ción con un �ujo de paquetes de asientos de coche convencional atiende a una disposición de los asientos más relajada semi-reclinada. Esto ayuda en la capaci-dad de pedalear por la liberación de las piernas y permitiendo una mayor cantidad de �ujo de aire circule alrededor del usuario.Un �ujo constante de aire se realiza mediante aberturas en la parte inferior por debajo de la cabina de la circulación de aire y alrededor del usuario de refrigera-ción mientras anda. Este aire también se escapa después de moverse a través del vehículo a través de rejillas de ventilación en la aleta superior.Una asamblea de dirección telescópica permite a los usuarios con los brazos de diferente longitud para adaptar a su gusto. Al entrar en el vehículo de la columna de dirección tiene una división y se puede mover fuera del camino.

http://www.behance.net/gallery/Flux-model/406944

Page 12: Fichas Tecnicas ROA 1

Fuente :

ROA1

Proyecto reto de Observación y

Apliación.

VehiculoUrbano

11

HONDA Forklift Delivery Vehicle

This project has been done 2 years ago as a part of our transport design subject at Monash University. The idea was to challenge the space distribution on a vehicle and challange ourselves with our Alias skills. This was my �rst attempt at modelling in alias so i tried to have as much as I can. That might explain to you why it is so sporty. :) The image above was rendered with VRAY and the scene vehicle is in was from a Vray training Cd.

http://www.behance.net/gallery/HONDA-Forklift-Delivery-Vehicle/635054?

Page 13: Fichas Tecnicas ROA 1

Fuente :

ROA1

Proyecto reto de Observación y

Apliación.

VehiculoUrbano

12

Transportation Design Master 4Degree Work 2011

This projects main inspiration source is compact living environments. just as a compact appartment have a limited ammount of space but has to work just as good as a normal appartment, this extremely small vehicle has to function just as good as any other car. looking at solutions picked from these environ-ments, the interior of this vehicle became even smaller than any other car available today.

http://www.behance.net/gallery/Transportation-Design-Master-Degree-Work-2011/893448?

Page 14: Fichas Tecnicas ROA 1

Fuente :

ROA1

Proyecto reto de Observación y

Apliación.

VehiculoUrbano

13

Higgins-Aubé Energya

Higgins-Aubé Inc, a young Canadian company, is proud to show early images of its latest creation, the Energya, a three-wheeled vehicle. The Energya™ three-wheeled vehicle, also now know as a motomobile, is designed as a light, high performance vehicle. Similar to a sports car where the driver and the passenger are seated side-by-side, the Energya™ motomobile has a rear engine that drives the single wheel at the back. The vehicle feels, drives and behaves mostly like an open wheels racecar. The vehicle features a distinctive, cutting-edge aggressive design that re�ects its level of performan-ce.

http://www.behance.net/gallery/Higgins-Aub-Energya/130886

Page 15: Fichas Tecnicas ROA 1

Fuente :

ROA1

Proyecto reto de Observación y

Apliación.

VehiculoUrbano

14

Cannondale JackKnife

Final thesis project of my MA Transporta-tion Design at Elisava Barcelona.Done together with Rodrigo Clavel under the guidance Torgny Fjeldskaar, Head Designer of Cannondale Europe.Inspired the Cannondale ON.

http://www.behance.net/gallery/Cannondale-JackKnife/530776

Page 16: Fichas Tecnicas ROA 1

Fuente :

ROA1

Proyecto reto de Observación y

Apliación.

VehiculoUrbano

15

Honda 3RC

Un concepto de vehículo eléctrico con tres ruedas. Para obtener un buen reparto de pesos las baterías se ubican en una posición muy baja. El conductor, ocupan-do también una posición baja, está prote-gido por una cubierta transparente que tapa el asiento cuando el vehículo no se utiliza. La situación de los laterales también permite mejorar la seguridad ante impactos laterales, mientras que por delante del conductor existe un pequeño maletero con llave. El Honda 3R-C se ha diseñado en el Centro de Investigación y Diseño de Honda en Milán.

http://motorgiga.com/noticias-actualidad-coches/honda-salon-de-ginebra-2010/gmx-niv50-con160005.htm

Page 17: Fichas Tecnicas ROA 1

Fuente :

ROA1

Proyecto reto de Observación y

Apliación.

VehiculoUrbano

16

ZigZag

El producto puede ser fabricado con tecnología de fácil comprarse, porque el marco es de aleación de aluminio 6161. Este material es de uso general en las bicicletas, dando al peso del producto baja a alta resistencia - atributo muy importante para la movilidad eléctrica y puede suport personas de hasta 100 kg (masa ZigZag 35Kg). Otras piezas son piezas estándar, la cáscara es de sólo dos partes que el montaje fácil con sólo cuatro tornillos y se realiza en ABS impacto duradero y buen material resistente. Esto permite un mantenimiento fácil y econó-mico del producto.En la parte eléctrica se puede ver en las imágenes, la ubicación de la instalación eléctrica tiene tres componentes principa-les. Los dos PB-ácido de 24V 20Ah baterías (económico y reciclable), indicador de velocidad, indicador de nivel de batería, control de frenado regenerativo y hubmo-tor 350-500W. Para viajar a distancias de entre el 10-15km, a 30 km / h.

http://www.behance.net/gallery/Zig-Zag-(One-person-electric-vehicle)/671261?utm_source=network&utm_medium=project_footer&utm_campaign=project_footer_references

Page 18: Fichas Tecnicas ROA 1

Fuente :

ROA1

Proyecto reto de Observación y

Apliación.

VehiculoUrbano

17

L3 Bicicleta urbana electrica

L3 es un nombre urbano de vehículos eléctricos, diseñados y construidos para el sector turístico a �n de avanzar en el interior, no tendrá que caminar largas distancias. También puede ser utilizado en el sector industrial y de negocios para mover en el interior.

L3 es más divertido con el plan de viajar a diferentes lugares de interés turístico ciudades, además de ser conveniente y útil para el usuario que viaja toda la experiencia sin contaminar el medio ambiente.

Diseñado para las 7 horas para un rango de 20 km con una sola carga (en una velocidad máxima), que puede ser recargada en 4 horas. Gracias un motor de 1000 W y seis baterías de ácido de plomo 12V20Ah, L3 puede conseguir una veloci-dad de hasta 50 km / h.

http://www.behance.net/gallery/L3-(Electric-bike)/1197077?utm_source=network&utm_medium=project_footer&utm_campaign=project_footer_references

Page 19: Fichas Tecnicas ROA 1

Fuente :

ROA1

Proyecto reto de Observación y

Apliación.

VehiculoUrbano

18

Fiat Eye

La propuesta es que el coche tiene su estabilidad en el sistema basado en la tecnología existente actualmente en uso se puede encontrar en el movimiento Segway Smart, que es un complejo meca-nismo que controla el medio ambiente que les rodea, toma decisiones al respecto y se mueve apropiadamente de acuerdo con las circunstancias presentes. Su sistema está equilibrado giroscópicamen-te. Por lo tanto, sólo un coche en marcha para empezar a caminar y dejar para detenerlo. El sistema también incluye la tecnología de sensores, sistema de propulsión eléctrica y software de control. Un punto positivo que puedo hacer es su mecanismo simple y conveniente de funcionamiento, que simplemente se reduce a "acelerar el coche para detenerse y caminar hasta el coche que deje de" todos desde el momento en el coche es conducido por comando voz y lectura biométrica, para evitar que el ocupante del vehículo físico de otras funciones como el cambio en los movimientos y otros mecanismos para conducir el vehículo.

http://www.behance.net/gallery/Fiat-EYE/647265

Page 20: Fichas Tecnicas ROA 1

Fuente :

ROA1

Proyecto reto de Observación y

Apliación.

VehiculoUrbano

19

Fluidi: An Eco-friendly

With the vast growth of cars that hit the road today, tra�c jam is a growing problem that people are facing day by day. With the aim to avoid tra�c jams, the Fluidi is made. Fluidi is a small transport solution that has the ability to be on the move all the time, and with its small size, it can easily avoid tra�c jams, thus, saves someone’s time. Aside from those great features mentioned, the Fluidi is made of recyclable materials making this one of a kind urban transport solution and eco-friendly one. Aside from the passen-gers, the Fluidi can also transport good, as its interiors has enough space for some goods.

http://www.igreenspot.com/�uidi-an-eco-friendly-transport-solution/

Page 21: Fichas Tecnicas ROA 1

Fuente :

ROA1

Proyecto reto de Observación y

Apliación.

VehiculoUrbano

20

Can-Am Spyder roadster

BRP has unveiled its �rst "on-road" vehicle, the 2008 Can-Am Spyder roadster. This three-wheel vehicle, with two wheels in the front and one in the rear, o�ers a completely new and stunning look. Powe-red by a proven 990cc V Twin engine designed and manufactured by BRP-Rotax, Spyder roadster, with its unique Y-architecture, can be described as part motorcycle and part convertible sports car. Later this year twelve selected American states and four Canadian provinces will o�er Can-Am Spyder roads-ters through BRP's existing dealer network, followed by France and Spain in early 2008. BRP will then expand its Can-Am Spyder o�er to more North American states, Canadian provinces, Europe and other countries, and expects to be present worldwide within three to four years.

http://www.gizmag.com/go/6823/

Page 22: Fichas Tecnicas ROA 1

Fuente :

ROA1

Proyecto reto de Observación y

Apliación.

VehiculoUrbano

21

Neos

The Neos is an enclosed motorbike and modular sidecar system for the 21st century. The Neos delivers enhanced safety features far beyond your conventional motorbike but still encapsulates the pure essence, feel and thrill of a motorbike. Research indicated the growing need for economi-cal and low congestion size vehicles along with a developing interest in western culture towards motorbikes as daily drivers. With the practicality and functionality of a fully enclosed driving canopy and an extra modular sidecar seating/storage system, the Neos is the ideal single occupant personal transportation device with multiple safety features and breathtaking driving performance.

The Neos project was inspired and initiated by the strong cultural and historic background that the motorbike and sidecar represent. Motorbikes and sidecars embody a form of freedom and adventure along with practical, economical and a fun form of transportation. With such strong history and in�uence on the world the design of the sidecar hasn’t really developed much in comparison to that of its automotive counterpart. Another aspect that I felt needed to be address was the unsafe perception associated with the traditional motorbike particularly in western culture. The key theme running through this project was recreating a form of transportation with all the practicality and excitement associated with a motorbike and sidecar but then taking safety features, driver usability, storage space and passenger �exibility of a small motor vehicle and combining the two to create something new and innovative.

http://www.behance.net/gallery/Neos-Enclosed-Motorbike-and-Modular-Sidecar-System/1004311

Page 23: Fichas Tecnicas ROA 1

Fuente :

ROA1

Proyecto reto de Observación y

Apliación.

VehiculoUrbano

22

One + one modular electro car

The core idea is using modular design principles in order to develop a vehicle that combine bene�ts of public transport (cheap, no technical service required) and bene�ts of personal transport (comfort, personalization, direction freedom).

The concept is service-based. User buys only “personal capsule” with no engine which provides comfort and personal space, then he rents modules featured with speci�c functions and energy consumption user needs at the moment.

Wheel concept is based on �exible tire pressure and changing contact patch. That will dramatically e�ect on energy consumption.

http://www.behance.net/gallery/One-one-modular-electro-car/256326

Page 24: Fichas Tecnicas ROA 1

Fuente :

ROA1

Proyecto reto de Observación y

Apliación.

VehiculoUrbano

23

One up! Concept

Personal transport for urban centres.

Degree project Mexico City 2010

Status: Completed Project selected to represent CIDI-UNAM at Ibero-American Biennial Design 2010 show.

Inspired on the UP concept cars from VW, ONE UP! is an electric vehicle proposal, focused on personal mobility for urban centres.

http://www.behance.net/gallery/One-up-concept/724680

Page 25: Fichas Tecnicas ROA 1

Fuente :

ROA1

Proyecto reto de Observación y

Apliación.

VehiculoUrbano

24

E-True 3W

Personal transport for urban centres.

http://www.behance.net/gallery/E-True-3W/1723205

Page 26: Fichas Tecnicas ROA 1