FICHA DE DATOS DE SEGURIDAD SILICATO SÓDICO LÍQUIDO ...Usado para la fabricación de sílice...
Transcript of FICHA DE DATOS DE SEGURIDAD SILICATO SÓDICO LÍQUIDO ...Usado para la fabricación de sílice...
Reg-15Rev.:01 (10-2011)Hoja: 1/12
1 IDENTIFICACIÓN DE LA SUSTANCIA O LA MEZCLA Y DE LA SOCIEDAD O LA EMPRESA
Nombre Químico (EINECS) Acido silícico, sal de sodio
Nombre Comercial SILICATO SÓDICO LÍQUIDO SUPER NEUTRO - SN
Sinónimos Vidrio soluble sódico - Silicato sódico liquido
Número C.A.S. 1344-09-8
Número E.I.N.E.C.S. 215-687-4
Número REACH 01-2119448725-31-0005
Fórmula Química RM [(SiO2).(Na2O).(H2O)], 3.2 < RM <= 3.5
FICHA DE DATOS DE SEGURIDAD SILICATO SÓDICO LÍQUIDO SUPERNEUTRO
1.1 Identificador del producto
1.2 Usos pertinentes identificados de la sustancia o de la mezcla y usos desaconsejados
Usado para la fabricación de sílice amorfa, gel de sílice, tamices moleculares, cargas blancas, aditivos en los detergentes y jabones,
fabricación de papel, en fundición y consolidación de suelos.
1.3 Datos del proveedor de la ficha de datos de seguridad
SILICEOS LARRÑAGA, S.L.
Gurutze bidea, 3
20180 OIARTZUN (Gipuzkoa)
Tel./Fax 943 491 349
e-mail: [email protected]
1.4 Teléfono de emergencia
Iñigo 686942222
Ramon 686942180
Maite 645007893
2 IDENTIFICACIÓN DE LOS PELIGROS
2.1 Clasificación de la sustancia o de la mezcla
Reglamento 1272/2008 (GHS)
No peligroso.
Directiva 67/548/CEE y enmiendas. Directiva 1999/45/CE y enmiendas
No peligroso.
2.2 Elementos de la etiqueta
No peligroso.
2.3 Otros peligros
El producto no es peligroso de acuerdo con el Reglamento CE 1272/2008 y sus enmiendas.
3 COMPOSICIÓN/INFORMACIÓN SOBRE LOS COMPONENTES
Reg-15Rev.:01(10-2011)Hoja: 2/12
FICHA DE DATOS DE SEGURIDAD SILICATO SÓDICO LÍQUIDO SUPER NEUTRO
- SILICATO SODICO MR >3.2
Sustancias
Número CASNúmeroEINECS
1344-09-8 215-687-4 01-2119448725-31-0005 No clasificado No peligroso No peligroso 37%
Número de registroREACH
Número delíndice CEE
Clasificación segúnDirectiva 67/548/CEE
Clasificación según Reglam.1272/2008 Contenido
Véase la sección 16 para el texto completo de las frases R, H y EUH mencionadas.Los límites de exposición laboral, en caso de existir, figuran en la sección 8.
4 PRIMEROS AUXILIOS
4.1. Descripción de los primeros auxilios
Inhalación
Contacto con la piel
Contacto con los ojos
Ingestión
4.2 Principales síntomas y efectos, agudosy retardados
4.3. Indicación de toda atención médica yde los tratamientos especiales que debandispensarse inmediatamente
Trasladar al lesionado a una zona ventilada.Solicitar atención médica si es necesaria.
Quitar las ropas contaminadas y lavar con abundante agua las partes afectadas.
En caso de contacto con los ojos, enjuagar con abundante cantidad de agua durante15 minutos por lo menos.Separar los párpados con los dedos para asegurar el buen enjuague de los ojos.Solicitar atención médica si es necesaria.
Limpiar la boca y dar de beber mucha agua.No provocar el vómitoSolicitar atención médica rápidamente.
En forma de aerosol es irritante para las mucosas y el tracto respiratorio.
Tratamiento sintomático.
4.1. Descripción de los primeros auxilios
5.1 Medios de extinción
5.2 Peligros específicos derivados de lasustancia o la mezcla
5.3 Recomendaciones para el personal delucha contra incendios
Apagar el fuego con un agente adecuado contra el fuego circundante.
No inflamable.
De acuerdo con la naturaleza del combustible
5 MEDIDAS DE LUCHA CONTRA INCENDIOS
6 MEDIDAS EN CASO DE VERTIDO
6.1 Precauciones personales, equipo deprotección y procedimientos deemergencia
6.2 Precauciones relativas al medioambiente
Utilícese equipo de protección personal.
Evitar que el producto alcance los desagües y espaciosconfinados.Evitar que el material contamine el agua del subsuelo.
Reg-15Rev.:01 (10-2011)Hoja: 3/12
FICHA DE DATOS DE SEGURIDAD SILICATO SÓDICO LÍQUIDO SUPER NEUTRO
6.3 Métodos y material de contención yde limpieza
6.4. Referencia a otras secciones
Contener el derrame con tierra o arena o absorbente inerte.Recoger el producto.Eliminar los últimos restos neutralizándolos con ácidos.Lavar la zona con abundante agua.El producto residual admite su recuperación y reciclado.Los envases contaminados con el producto deben ser tratados como éste.
Para su eliminación ver Sección 13.
7.1 Precauciones para una manipulaciónsegura
7.2 Condiciones de almacenamiento seguro,incluidas posibles incompatibilidades
7.3 Usos específicos finales
Evítese el contacto con los ojos y la piel.Utilícese equipo de protección personal.
Mantener los envases cerrados.Utilizar solamente aceros y materiáles plásticos.
Ver anexo
7 MANIPULACIÓN Y ALMACENAMIENTO
8 CONTROLES DE LA EXPOSICIÓN/PROTECCIÓN INDIVIDUAL
8.1 Parámetros de control
Valores límite de la exposición
No se han establecido límites de exposición para el producto.
DN(M)EL/PNEC
DNELs for workers
Acute - systemic effects
Acute - systemic effects
Acute - local effects
Acute - local effects
Long-term-systemic effects
Long-term-systemic effects
Long-term-local effects
Long-term-local effects
Dermal (mg/kg bw /day)
Inhalation (mg/m³)
Dermal (mg/kg bw /day)
Inhalation (mg/m³)
Dermal (mg/kg bw /day)
Inhalation (mg/m³)
Dermal (mg/kg bw /day)
Inhalation (mg/m³)
Exposure pattern Route Descriptors DNEL(appropriate unit)
Most sensitive endpoint
not quantifiable
not quantifiable
not quantifiable
not quantifiable
DNEL
DNEL
not quantifiable
not quantifiable
1.59
5.61
repeated dose toxicity
repeated dose toxicity
*) Unit as specified in column "Route"
PNECwater (freshwater) = 7.5 mg/ LPNECwater (marine water) = 1 mg/ LPNECwater (intermittent releases) = 7.5 mg/ L
PNECsediment = Not applicable
PNECsoil = Not applicable
PNECSTP = 348 mg/ L
PNECoral = Not applicable
Reg-15Rev.:01 (10-2011)Hoja: 4/12
FICHA DE DATOS DE SEGURIDAD SILICATO SÓDICO LÍQUIDO SUPER NEUTRO
DNELs for the general population
Acute - systemic effects
Acute - systemic effects
Acute - systemic effects
Acute - local effects
Acute - local effects
Long-term-systemic effects
Long-term-systemic effects
Long-term-systemic effects
Long-term-local effects
Long-term-local effects
Dermal (mg/kg bw /day)
Inhalation (mg/m³)
Oral (mg/kg bw /day)
Dermal (mg/kg bw /day)
Inhalation (mg/m³)
Dermal (mg/kg bw /day)
Inhalation (mg/m³)
Oral (mg/kg bw /day)
Dermal (mg/kg bw /day)
Inhalation (mg/m³)
Exposure pattern Route Descriptors DNEL(appropriate unit)
Most sensitive endpoint
not quantifiable
not quantifiable
not quantifiable
not quantifiable
DNEL
DNEL
DNEL
not quantifiable
not quantifiable
not quantifiable
0.8
1.38
0.8
repeated dose toxicity
repeated dose toxicity
repeated dose toxicity
*) Unit as specified in column "Route"
PNECs
Controles técnicos apropiados
Protección respiratoria
Protección de las manos
Protección de los ojos
Protección cutánea
Controles de la exposición del medioambiente
Dotar a las instalaciones de lavaojos y duchas de emergencia.Como medidas generales de protección e higiene no comer, beber ni fumar mientrasse manipula el producto.Deben observarse las medidas de precaución habituales en la manipulación deproductos químicos.
En caso de generarse aerosoles ambientales utilizar mascarilla protectora.
Úsense guantes adecuados.
Gafas de seguridad cerradas o pantalla facial.
Úsese indumentaria protectora adecuada.
Ver anexo
8.2 Controles de la exposición
Reg-15Rev.:01 (10-2011)Hoja: 5/12
FICHA DE DATOS DE SEGURIDAD SILICATO SÓDICO LÍQUIDO SUPER NEUTRO
9 PROPIEDADES FÍSICAS Y QUÍMICAS
9.1 Información sobre propiedades físicas y químicas básicas
Aspecto
Color
Olor
ph en solución acuosa
Punto/intervalo de ebullición
Punto de inflamación
Inflamabilidad (sólido/gas)
Propiedades explosivas
Propiedades comburentes
Presión de vapor
Densidad relativa
Hidrosolubilidad
Liposolubilidad
Coeficiente de reparto (n-octanol/agua)
Viscosidad
Densidad de vapor
Velocidad de evaporación
Líquido viscoso transparente.
Incoloro.
Inodoro.
10.6 a 20ºC, solución al 1%
100,7ºC
No inflamable.
No inflamable.
No explosivo.
No comburente según Reglamento (CE) No 1272/2008
Sin datos disponibles.
1,368 g/cm3 a 20ºC
Miscible con agua.
Sin datos disponibles.
Sin datos disponibles.
160 cP a 20ºC
Sin datos disponibles.
Sin datos disponibles.
9.2 Información adicional
Punto/intervalo de fusión
Relación molar
Temperatura de ignición espontánea
Temperatura de autodescomposición
No aplicable.
3,45
No aplicable.
No aplicable.
10 ESTABILIDAD Y REACTIVIDAD
10.1 Reactividad
10.2 Estabilidad química
10.3 Posibilidad de reacciones peligrosas
10.4 Condiciones que deben evitarse
10.5 Materiales incompatibles
Reacciona violentamente con ácidos concentrados desprendiendo calor.
Estable en las condiciones de manipulación y almacenamiento normales.
Reacciona violentamente con ácidos concentrados desprendiendo calor.
Evitar el contacto con ácidos y recipientes metálicos no férricos.Una larga exposición al aire puede ocasionar la carbonatación del producto por elanhídrido carbónico.
Aluminio, estaño, cinc, y sus aleaciones.
11 INFORMACIÓN TOXICOLÓGICA
11.1 Información sobre losa efectos toxicológicos
Aspecto
Color
Olor
ph en solución acuosa
Punto/intervalo de ebullición
Punto de inflamación
Inflamabilidad (sólido/gas)
Propiedades explosivas
Propiedades comburentes
Presión de vapor
Densidad relativa
Hidrosolubilidad
Liposolubilidad
Coeficiente de reparto (n-octanol/agua)
Viscosidad
Densidad de vapor
Velocidad de evaporación
Líquido viscoso transparente.
Incoloro.
Inodoro.
10.6 a 20ºC, solución al 1%
100,7ºC
No inflamable.
No inflamable.
No explosivo.
No comburente según Reglamento (CE) No 1272/2008
Sin datos disponibles.
1,368 g/cm3 a 20ºC
Miscible con agua.
Sin datos disponibles.
Sin datos disponibles.
160 cP a 20ºC
Sin datos disponibles.
Sin datos disponibles.
Aspecto
Color
Olor
ph en solución acuosa
Punto/intervalo de ebullición
Punto de inflamación
Inflamabilidad (sólido/gas)
Propiedades explosivas
Propiedades comburentes
Presión de vapor
Densidad relativa
Hidrosolubilidad
Liposolubilidad
Coeficiente de reparto (n-octanol/agua)
Viscosidad
Densidad de vapor
Velocidad de evaporación
Líquido viscoso transparente.
Incoloro.
Inodoro.
10.6 a 20ºC, solución al 1%
100,7ºC
No inflamable.
No inflamable.
No explosivo.
No comburente según Reglamento (CE) No 1272/2008
Sin datos disponibles.
1,368 g/cm3 a 20ºC
Miscible con agua.
Sin datos disponibles.
Sin datos disponibles.
160 cP a 20ºC
Sin datos disponibles.
Sin datos disponibles.
FICHA DE DATOS DE SEGURIDAD SILICATO SÓDICO LÍQUIDO SUPER NEUTRO
Reg-15Rev.:05 (10-2011)Hoja: 6/12
Inhalación
Ingestión
Contacto con la piel
Contacto con los ojos
Sensibilización
Efectos carcinogénicos
Efectos mutagénicos
Efectos tóxicos para la reproducción
En forma de aerosol es irritante para las mucosas y el tracto respiratorio.Toxicidad aguda por inhalación: LC50, 4h, Rata = 2.06 mg/l
Toxicidad oral aguda: LD50,-, Rata = 3400 mg/kg/bw
No irritante (conejo)Toxicidad dérmica aguda.: LD50, -, Rata = > 5000 mg/kg/bw
No irritante (conejo)
No sensibilizante
No reconocido como carcinógeno por los Organismos Oficiales ni por los Institutosde Investigación (IARC, NTP, OSHA, ACGIH).
Ensayo in vitro: negativoEnsayo en vivo: negativo
No esta reconocido como reprotóxico por los Organismos Oficiales ni por los Institutosde Investigación.
12 INFORMACIÓN ECOLÓGICA
12.1 Toxicidad
12.2 Persistencia y degradabilidad
12.3 Potencia de bioacumulación
12.4 Movilidad en el suelo
12.5 Resultados de la valoración PBT y mPmB
12.6 Otros efectos adversos
El producto no es peligroso para el Medio Ambiente de acuerdo con el Reglamento(CE) No 1272/2008 y sus enmiendas.Los silicatos solubles en contacto con aguas naturales pueden reaccionar con loscationes calcio, magnesio, hierro, aluminio, etc. dando compuestos insolublesconstituyentes de suelos naturales.El anión silicato no se le atribuye ningun efecto nocivo especifico. A considerarúnicamente una eventual toxicidad a los organismos acuáticos derivada de un aumentodel valor pH de las aguas debido a su alcalinidad.Toxicidad aguda en peces: LC50, 96h, Lepomis machrochirus = 1108 mg/l Silicatode sodioToxicidad aguda en invertebrados acuáticos: EC50, 48h, Daphnia Magna = 1700 mg/lSilicato de sodioToxicidad aguda en bacterias: EC0, 18h, Pseudomonas putida = 3480 mg/l Silicatode sodioToxicidad aguda en algas: EC50, 72h, Scenedesmus subspicatus = 207 mg/l Silicatode sodio
La biodegradabilidad, como tal, no se aplica a los compuestos inorgánicos.
No bioacumulable.
La sílice es eliminada de manera continua del agua por medio de procesos bioquímicos:ciertos organismos tales como diatomeas, radiolarians, silicoflagelatos y ciertasesponjas incorporan la sílice a sus conchas y esqueletos.
Esta sustancia no está considerada como persistente, bioacumulable ni tóxica (PBT).
Ningun efecto conocido
13 RELATIVAS A LA ELIMINACIÓNCONSIDERACIONES
13.1 Métodos para el tratamiento de residuos
La información contenida en este documento es, según todos nuestros conocimientos actuales, verdadera y exacta. Pero cualesquiera delas recomendaciones o sugerencias formuladas aquí lo son sin nuestra garantía, ya que las condiciones de uso del producto están fuerade nuestro control. Además, nada de lo contenido aquí puede ser interpretado como una recomendación para usar cualquier productoinfringiendo las leyes, prácticas de Seguridad o patentes en vigor sobre cualquier materia o su uso.
Reg-15Rev.:05 (10-2011)Hoja: 7/12
FICHA DE DATOS DE SEGURIDAD SILICATO SÓDICO LÍQUIDO SUPER NEUTRO
El producto/envase desechado como residuo puede depositarse en vertederos controlados de acuerdo con los reglamentos gubernamentales.
14 INFORMACIÓN RELATIVA AL TRANSPORTE
Considerado no peligroso para el transporte según ADR/RID, ADNR, Código IMDG, ICAO/IATA, DGR.
15 INFORMACIÓN REGLAMENTARIA
15.1 Reglamentación y legislación en materia de seguridad, salud y medio ambiente específicas para la sustancia o la mezcla15.1 Reglamentación y legislación en materia de seguridad, salud y medio ambiente específicas para la sustancia o la mezcla
RESIDUOS PELIGROSOS
No aplicable
LEY DE AGUAS Y NORMATIVA SOBRE VERTIDOS DE SUSTANCIAS PELIGROSAS DESDE TIERRA AL MAR
El producto no está clasificado como contaminante. No obstante, a tener en cuenta el efecto del aumento de pH en el medio receptor.
ACCIDENTES MAYORES (R.D. 1254/99 y Directiva 96/82/CEE
No aplicable.
Limitación en la comercialización y uso de determinadas sustancias y preparados peligrosos (Directiva 76/769/CEE)
No aplicable.
Precursores de drogas (Reglamento (CE) nº 273/2004)
No aplicable.
CONVENCIÓN SOBRE ARMAS QUÍMICAS
No aplicable.
Exportación e importación de productos químicos peligrosos (Reglamento (CE) n° 304/2003)
No aplicable.
Control de las exportaciones de productos y tecnología de doble uso (Reglamento 1334/2000 y modif.)
No aplicable.
RESIDUOS PELIGROSOS
No aplicable
LEY DE AGUAS Y NORMATIVA SOBRE VERTIDOS DE SUSTANCIAS PELIGROSAS DESDE TIERRA AL MAR
El producto no está clasificado como contaminante. No obstante, a tener en cuenta el efecto del aumento de pH en el medio receptor.
ACCIDENTES MAYORES (R.D. 1254/99 y Directiva 96/82/CEE
No aplicable.
Limitación en la comercialización y uso de determinadas sustancias y preparados peligrosos (Directiva 76/769/CEE)
No aplicable.
Precursores de drogas (Reglamento (CE) nº 273/2004)
No aplicable.
CONVENCIÓN SOBRE ARMAS QUÍMICAS
No aplicable.
Exportación e importación de productos químicos peligrosos (Reglamento (CE) n° 304/2003)
No aplicable.
Control de las exportaciones de productos y tecnología de doble uso (Reglamento 1334/2000 y modif.)
No aplicable.
RESIDUOS PELIGROSOS
No aplicable
LEY DE AGUAS Y NORMATIVA SOBRE VERTIDOS DE SUSTANCIAS PELIGROSAS DESDE TIERRA AL MAR
El producto no está clasificado como contaminante. No obstante, a tener en cuenta el efecto del aumento de pH en el medio receptor.
ACCIDENTES MAYORES (R.D. 1254/99 y Directiva 96/82/CEE
No aplicable.
Limitación en la comercialización y uso de determinadas sustancias y preparados peligrosos (Directiva 76/769/CEE)
No aplicable.
Precursores de drogas (Reglamento (CE) nº 273/2004)
No aplicable.
CONVENCIÓN SOBRE ARMAS QUÍMICAS
No aplicable.
Exportación e importación de productos químicos peligrosos (Reglamento (CE) n° 304/2003)
No aplicable.
Control de las exportaciones de productos y tecnología de doble uso (Reglamento 1334/2000 y modif.)
No aplicable.
RESIDUOS PELIGROSOS
No aplicable
LEY DE AGUAS Y NORMATIVA SOBRE VERTIDOS DE SUSTANCIAS PELIGROSAS DESDE TIERRA AL MAR
El producto no está clasificado como contaminante. No obstante, a tener en cuenta el efecto del aumento de pH en el medio receptor.
ACCIDENTES MAYORES (R.D. 1254/99 y Directiva 96/82/CEE
No aplicable.
Limitación en la comercialización y uso de determinadas sustancias y preparados peligrosos (Directiva 76/769/CEE)
No aplicable.
Precursores de drogas (Reglamento (CE) nº 273/2004)
No aplicable.
CONVENCIÓN SOBRE ARMAS QUÍMICAS
No aplicable.
Exportación e importación de productos químicos peligrosos (Reglamento (CE) n° 304/2003)
No aplicable.
Control de las exportaciones de productos y tecnología de doble uso (Reglamento 1334/2000 y modif.)
No aplicable.
RESIDUOS PELIGROSOS
No aplicable
LEY DE AGUAS Y NORMATIVA SOBRE VERTIDOS DE SUSTANCIAS PELIGROSAS DESDE TIERRA AL MAR
El producto no está clasificado como contaminante. No obstante, a tener en cuenta el efecto del aumento de pH en el medio receptor.
ACCIDENTES MAYORES (R.D. 1254/99 y Directiva 96/82/CEE
No aplicable.
Limitación en la comercialización y uso de determinadas sustancias y preparados peligrosos (Directiva 76/769/CEE)
No aplicable.
Precursores de drogas (Reglamento (CE) nº 273/2004)
No aplicable.
CONVENCIÓN SOBRE ARMAS QUÍMICAS
No aplicable.
Exportación e importación de productos químicos peligrosos (Reglamento (CE) n° 304/2003)
No aplicable.
Control de las exportaciones de productos y tecnología de doble uso (Reglamento 1334/2000 y modif.)
No aplicable.
RESIDUOS PELIGROSOS
No aplicable
LEY DE AGUAS Y NORMATIVA SOBRE VERTIDOS DE SUSTANCIAS PELIGROSAS DESDE TIERRA AL MAR
El producto no está clasificado como contaminante. No obstante, a tener en cuenta el efecto del aumento de pH en el medio receptor.
ACCIDENTES MAYORES (R.D. 1254/99 y Directiva 96/82/CEE
No aplicable.
Limitación en la comercialización y uso de determinadas sustancias y preparados peligrosos (Directiva 76/769/CEE)
No aplicable.
Precursores de drogas (Reglamento (CE) nº 273/2004)
No aplicable.
CONVENCIÓN SOBRE ARMAS QUÍMICAS
No aplicable.
Exportación e importación de productos químicos peligrosos (Reglamento (CE) n° 304/2003)
No aplicable.
Control de las exportaciones de productos y tecnología de doble uso (Reglamento 1334/2000 y modif.)
No aplicable.
RESIDUOS PELIGROSOS
No aplicable
LEY DE AGUAS Y NORMATIVA SOBRE VERTIDOS DE SUSTANCIAS PELIGROSAS DESDE TIERRA AL MAR
El producto no está clasificado como contaminante. No obstante, a tener en cuenta el efecto del aumento de pH en el medio receptor.
ACCIDENTES MAYORES (R.D. 1254/99 y Directiva 96/82/CEE
No aplicable.
Limitación en la comercialización y uso de determinadas sustancias y preparados peligrosos (Directiva 76/769/CEE)
No aplicable.
Precursores de drogas (Reglamento (CE) nº 273/2004)
No aplicable.
CONVENCIÓN SOBRE ARMAS QUÍMICAS
No aplicable.
Exportación e importación de productos químicos peligrosos (Reglamento (CE) n° 304/2003)
No aplicable.
Control de las exportaciones de productos y tecnología de doble uso (Reglamento 1334/2000 y modif.)
No aplicable.
RESIDUOS PELIGROSOS
No aplicable
LEY DE AGUAS Y NORMATIVA SOBRE VERTIDOS DE SUSTANCIAS PELIGROSAS DESDE TIERRA AL MAR
El producto no está clasificado como contaminante. No obstante, a tener en cuenta el efecto del aumento de pH en el medio receptor.
ACCIDENTES MAYORES (R.D. 1254/99 y Directiva 96/82/CEE
No aplicable.
Limitación en la comercialización y uso de determinadas sustancias y preparados peligrosos (Directiva 76/769/CEE)
No aplicable.
Precursores de drogas (Reglamento (CE) nº 273/2004)
No aplicable.
CONVENCIÓN SOBRE ARMAS QUÍMICAS
No aplicable.
Exportación e importación de productos químicos peligrosos (Reglamento (CE) n° 304/2003)
No aplicable.
Control de las exportaciones de productos y tecnología de doble uso (Reglamento 1334/2000 y modif.)
No aplicable.
RESIDUOS PELIGROSOS
No aplicable
LEY DE AGUAS Y NORMATIVA SOBRE VERTIDOS DE SUSTANCIAS PELIGROSAS DESDE TIERRA AL MAR
El producto no está clasificado como contaminante. No obstante, a tener en cuenta el efecto del aumento de pH en el medio receptor.
ACCIDENTES MAYORES (R.D. 1254/99 y Directiva 96/82/CEE
No aplicable.
Limitación en la comercialización y uso de determinadas sustancias y preparados peligrosos (Directiva 76/769/CEE)
No aplicable.
Precursores de drogas (Reglamento (CE) nº 273/2004)
No aplicable.
CONVENCIÓN SOBRE ARMAS QUÍMICAS
No aplicable.
Exportación e importación de productos químicos peligrosos (Reglamento (CE) n° 304/2003)
No aplicable.
Control de las exportaciones de productos y tecnología de doble uso (Reglamento 1334/2000 y modif.)
No aplicable.
RESIDUOS PELIGROSOS
No aplicable
LEY DE AGUAS Y NORMATIVA SOBRE VERTIDOS DE SUSTANCIAS PELIGROSAS DESDE TIERRA AL MAR
El producto no está clasificado como contaminante. No obstante, a tener en cuenta el efecto del aumento de pH en el medio receptor.
ACCIDENTES MAYORES (R.D. 1254/99 y Directiva 96/82/CEE
No aplicable.
Limitación en la comercialización y uso de determinadas sustancias y preparados peligrosos (Directiva 76/769/CEE)
No aplicable.
Precursores de drogas (Reglamento (CE) nº 273/2004)
No aplicable.
CONVENCIÓN SOBRE ARMAS QUÍMICAS
No aplicable.
Exportación e importación de productos químicos peligrosos (Reglamento (CE) n° 304/2003)
No aplicable.
Control de las exportaciones de productos y tecnología de doble uso (Reglamento 1334/2000 y modif.)
No aplicable.
15.2 Evaluación de la seguridad química
Si
16 OTRA INFORMACIÓN
Restricciones recomendadas de la utilización
Fuentes de los principales datosutilizados para elaborar la ficha
Modificaciones de la última revisión
Las aplicaciones previstas o recomendadas del producto son:Usado para la fabricación de sílice amorfa, gel de sílice, tamices moleculares,cargas blancas, aditivos en los detergentes y jabones, fabricación de papel, enfundición y consolidación de suelos.FMC/ FMC Foret s.a.
Adaptación a Reglamento 1272/2008 (GHS)Registro REACHAdaptación a Reglamento 453/2010
1. Short title of exposure scenario 1
Workplace exposure to sodium silicate solutions: Manufacture of the substance as well as industrial and professional uses.
Reg-15Rev.:05 (10-2011)Hoja: 8/12
ANEXO - FICHA DE DATOS DE SEGURIDAD SILICATO SÓDICO LÍQUIDO SUPER NEUTRO
Summarised exposure scenarios for sodium silicate
2. Description of activities and processes covered in the exposure scenario
Sector of use (SU)Descriptive purpose only, not relevant for exposure assessment
SU3 Industrial uses: Uses of substances as such or in preparations*at industrial sitesSU22 Professional uses: Public domain (administration,education, entertainment, services, craftsmen)Specific sectors:SU1 Agriculture, forestry, fishery / SU2a Mining, (without offshoreindustries)/ SU2b Offshore industries/ SU5 Manufacture of textiles,leather, fur/ SU6a Manufacture of wood and wood products/ SU6bManufacture of pulp, paper and paper products/ SU7 Printing andreproduction of recorded media/ SU8 Manufacture of bulk, largescale chemicals (including petroleum products)/ SU9 Manufactureof fine chemicals/ SU10 Formulation [mixing] of preparationsand/or re-packaging (excluding alloys)/ SU11Manufacture of rubberproducts/ SU12 Manufacture of plastics products, includingcompounding and conversion/ SU13 Manufacture of other non-metallic mineral products, e.g. plasters, cement / SU14 Manufactureof basic metals, including alloys/ SU15 Manufacture of fabricatedmetal products, except machinery and equipment/ SU16Manufacture of computer, electronic and optical products, electricalequipment/ SU17 General manufacturing, e.g. machinery,equipment, vehicles, other transport equipment / SU19 Buildingand construction work/ SU20 Health services/ SU23 Electricity,steam, gas water supply and sewage treatment/ SU0 Others:Food and drinks - Industrial and professional washing andcleaning –'96 Laboratories (all scales)
Product category (PC)Descriptive purpose only, not relevant for exposure assessment
PC1 Adhesives, sealants/ PC2 Adsorbents/ PC4 Anti-Freeze andde-icing products/ PC7 Base metals and alloys/ PC8 Biocidalproducts (e.g. Disinfectants, pest control)/ PC9a Coatings andpaints, thinners, paint removers/ PC9b Fillers, putties, plasters,modelling clay/ PC14 Metal surface treatment products, includinggalvanic and electroplating products/ PC15 Non-metal-surfacetreatment products/ PC20 Products such as ph-regulators, flocculants,precipitants, neutralization agents/ PC21 Laboratory chemicals/PC23 Leather tanning, dye, finishing, impregnation and care products/PC24 Lubricants, greases, release products/ PC25 Metal workingfluids/ PC26 Paper and board dye, finishing and impregnationproducts: including bleaches and other processing aids/ PC31Polishes and wax blends/ PC32 Polymer preparations andcompounds/ PC34 Textile dyes, finishing and impregnating products;including bleaches and other processing aids/ PC35 Washing andcleaning products (including solvent based products)/ PC37 Watertreatment chemicals/ PC38 Welding and soldering products (withflux coatings or flux cores.), flux products/ PC39 Cosmetics, personalcare products/ PC0 Others: Construction materials - Oil improvers–'96 Glass - Correction lacquers –'96 Antioxidants andantionizants –'96 Stabilizers
Process category (PROC ) PROC1 Use in closed, continuous process, no likelihood of exposure/PROC2 Use in closed, continuous process with occasional controlledexposure/ PROC3 Use in closed batch process (synthesis orformulation)/ PROC4 Use in batch and other process (synthesis)where opportunity for exposure arises/ PROC5 Mixing or blendingin batch processes for formulation of preparations and articles(multistage and/or significantcon-tact)
Reg-15Rev.:05 (10-2011)Hoja: 9/12
ANEXO - FICHA DE DATOS DE SEGURIDAD SILICATO SÓDICO LÍQUIDO SUPER NEUTRO
PROC6 Calendering operations/ PROC7 Industrial spraying/PROC8a Transfer of substance or preparation (charging /discharging) from/to vessels/large containers at non-dedicatedfacilities/ PROC8b Transfer of substance or preparation (charging/discharging) from/to vessels/large containers at dedicated facilities/PROC9 Transfer of substance or preparation into small containers(dedicated filling line, including weighing)/ PROC10 Rollerapplication or brushing/ PROC11 Non industrial spraying/ PROC13Treatment of articles by dipping and pouring/ PROC14 Productionof preparations or articles by tabletting,compression, extrusion,pelletisation/ PROC15 Use as laboratory reagent/ PROC19 Hand-mixing with intimate contact and only PPE available/ PROC21Low energy manipulation of substances bound in materials and/orarticles/ PROC22 Potentially closed processing operations withminerals/metals at elevated temperature (Industrial settings)/PROC23 Open processing and transfer operations withminerals/metals at elevated temperature/ PROC24 High(mechanical) energy work-up of substances bound in materialsand/or articles/ PROC25 Other hot work operations with metals/PROC26 Handling of solid inorganic substances at ambienttemperature
Article category (AC)Not relevant for exposure assessment, not intended for release.
AC4 Stone, plaster, cement, glass and ceramic articles AC8 Paperarticles AC01: Pulp of wood or of other fibrous cellulosic material,recovered paper and paperboard AC01: Paving blocks, slabs,bricks, moulded glass, ceramic, refractory cements, mortars andconcretes, etc.
Environmental release category (ERC)Not relevant for exposure assessment, not classified asdangerous for the environment
ERC1 Manufacture of substances/ ERC2 Formulation of preparations/ERC3 Formulation in materials/ ERC4 Industrial use of processingaids in processes and products, not becoming part of articles/ ERC5Industrial use resulting in inclusion into or onto a matrix/ ERC6AIndustrial use resulting in manufacture of another substance (useof intermediates)/ ERC6B Industrial use of reactive processing aids/ERC8A Wide dispersive indoor use of processing aids in opensystems/ ERC8B Wide dispersive indoor use of reactive substancesin open systems/ ERC8C Wide dispersive indoor use resulting ininclusion into or onto a matrix/ ERC8D Wide dispersive outdoor useof processing aids in open systems/ ERC8F Wide dispersive outdooruse resulting in inclusion into or onto a matrix/ ERC9A Wide dispersiveindoor use of substances in closed systems/ ERC10A Wide dispersiveoutdoor use of long-life articles and materials with low release/ERC11A Wide dispersive indoor use of long-life articles and materialswith low release.
3. Operational conditions for which the exposure scenario ensures control of risk
3. 1 Operational conditions related with substance/ product
ERC1 Manufacture of substances/ ERC2 Formulation of preparations/ERC3 Formulation in materials/ ERC4 Industrial use of processingaids in processes and products, not becoming part of articles/ ERC5Industrial use resulting in inclusion into or onto a matrix/ ERC6AIndustrial use resulting in manufacture of another substance (useof intermediates)/ ERC6B Industrial use of reactive processing aids/ERC8A Wide dispersive indoor use of processing aids in opensystems/ ERC8B Wide dispersive indoor use of reactive substancesin open systems/ ERC8C Wide dispersive indoor use resulting ininclusion into or onto a matrix/ ERC8D Wide dispersive outdoor useof processing aids in open systems/ ERC8F Wide dispersive outdooruse resulting in inclusion into or onto a matrix/ ERC9A Wide dispersiveindoor use of substances in closed systems/ ERC10A Wide dispersiveoutdoor use of long-life articles and materials with low release/ERC11A Wide dispersive indoor use of long-life articles and materialswith low release.
3. Operational conditions for which the exposure scenario ensures control of risk
Physical form of product in which the substance is contained Liquid - solution (vapour pressure 0.00016 kPa - 1172 °C)
Concentration of substance in preparation or article Covers percentage substance in the product up to 100 %and up to 25 % for PROC 7 and 11 (> 1 hr.)
3.2 Operational conditions related with frequency and quantities of use
Duration of exposure at workplace: > 4 hours/dayExcept for PROCs 7 and 11: Avoid operations for more than 1 hou
Frequency of exposure at workplace: Covers frequency up to: daily use, weekly, monthly and yearly.
Annual amount used: Unlimited
General Whenever handling sodium silicate as a substance on itsown (powder/granules or liquid) or in a mixture outside closed systems, suitablepersonal protective equipment are the preferred and only measureof control. Definition of PPE will depend on the use and concentration.
Reg-15Rev.:05 (10-2011)Hoja: 10/12
ANEXO - FICHA DE DATOS DE SEGURIDAD SILICATO SÓDICO LÍQUIDO SUPER NEUTRO
4.2 Environment related measures; type and efficiency of single options or combination of options on exposure to be quantified;options to be phrased as instructive guidance
Not required, as soluble silicates, including sodium silicate, do not meet the criteria for classification as dangerous to the environmentaccording to 67/548/EEC (See Article 14.4 of REACH Regulation). Furthermore, as high production volume substances, soluble silicateshave been reviewed to a great extent for their exposure potential to the environment and the possible risks arising from their release (VanDokkum et al. 2002, OECD SIDS 2004, HERA 2005, and CEES 2008). It was concluded that soluble silicates are currently of low priorityfor further work because
5. Prediction of exposure resulting from the conditions described above and the substance properties.
Workers (oral) Negligible oral exposure due to good hygiene practice.
3.3 Other relevant operational condition
4. RMMs that, in combination with the operational conditions of use, ensure control of risk
Indoor and outdoor operations.
4.1 RMMs related to workers
Organisational measures Procedural and/or control technologies are required to minimiseemissions and the resulting exposure during cleaning andmaintenance procedures or if there is a risk of the occupationalexposure limit being exceeded.
Technical measures PROC 7, 11: Provide enhanced general ventilation by mechanicalmeans if respiratory protection is not available.
Respiratory protection Wear a respirator conforming to EN140 with Type A/P2 filter orbetter. Specifically required for PROC 7, 11.
Hand protection Wear suitable gloves (tested to EN374).
Eye protection Wearing of eye/face protection is required. Chemical goggles shouldbe consistent with EN 166 or equivalent.
Skin and body protection Wearing of suitable protective clothing is required.
Hygiene measures Good basic standards of occupational hygiene assumed to beimplemented:Keep away from foodstuffs, drinks and tobacco. Wash hands beforebreaks and at end of work. Keep work clothes separate. Take offimmediately all contaminated clothing. Wash thoroughly after openhandling of the product.
Workers (dermal)DNEL (dermal, worker): 1.59 mg/kg/day
Estimated Exposure Concentrations: 0 mg/cm2 Dermal exposureis prevented by personal protective equipment (protective clothing,gloves, goggles) which is mandatory because of potential corrosiveproperties of sodium silicate.
Workers (inhalation)DNEL (inhalation, worker): 5.61 mg/ m3
Calculated with ECETOC TRASpraying operation with PPE –'96 25% solutions: 3.7 mg/m3Spraying operation with PPE –'96 > 25% solutions –'96 < 1hr:4.9 mg/m3
Environment Not required.
3.3 Other relevant operational conditions
Unless otherwise stated assumes use at ambient temperatures, 20 m3 room, natural ventilation, Skin contact area up to 6660 cm2.
Reg-15Rev.:05 (10-2011)Hoja: 11/12
ANEXO - FICHA DE DATOS DE SEGURIDAD SILICATO SÓDICO LÍQUIDO SUPER NEUTRO
1. Short title of exposure scenario 2
Use of sodium silicate in consumer products (household products containing sodium silicate)
2. Description of activities and processes covered in the exposure scenario
Sector of use (SU)Descriptive purpose only, not relevant for exposure assessment
Product category (PC)Descriptive purpose only, not relevant for exposure assessment
PC1 Adhesives, sealants/ PC3 Air care products/ PC8 Biocidalproducts (e.g. Disinfectants, pest control)/ PC9a Coatings andpaints, thinners, paint removers/ PC9b Fillers, putties, plasters,modelling clay/ PC15 Non-metal-surface treatment products/ PC31Polishes and wax blends/ PC35 Washing and cleaning products(including solvent based products)/ PC0 Others: constructionmaterials.
Article category (AC)Not relevant for exposure assessment, not intended for release.
AC4 Stone, plaster, cement, glass and ceramic articlesAC5 Fabrics, textiles and apparel/ AC6 Leather articles
Environmental release category (ERC)Not relevant for exposure assessment, not classified as dangerousfor the environment
ERC8A Wide dispersive indoor use of processing aids in opensystems/ ERC8B Wide dispersive indoor use of reactive substancesin open systems/ ERC8C Wide dispersive indoor use resulting ininclusion into or onto a matrix/ ERC8D Wide dispersive outdoor useof processing aids in open systems/ ERC8F Wide dispersive outdooruse resulting in inclusion into or onto a matrix/ ERC9A Wide dispersiveindoor use of substances in closed systems/ ERC10A Wide dispersiveoutdoor use of long-life articles and materials with low release/ERC10B Wide dispersive outdoor use of long-life articles and materialswith high or in-tended release (including abrasive processing)/ERC11A Wide dispersive indoor use of long-life articles and materialswith low release./ ERC11B Wide dispersive indoor use of long-lifearticles and materials with high or intended release (including abrasiveprocessing).
3. Operational conditions for which the exposure scenario ensures control of risk
3. 1 Operational conditions related with substance/ product
Physical form of product in which the substance is contained Powder or liquid (vapour pressure < 0.5 kPa)
Concentration of substance in preparation or article Covers percentage substance in the product up to 100 %,unless otherwise stated.
3.2 Operational conditions related with frequency and quantities of use
Duration of exposure at workplace: See below.
Frequency of exposure at workplace: General:365 days/year4 times/ day
Soaps and detergents:4 days/week1 time/dayExposure up to 0.17 hr/event of use.
SU21 Consumer uses: Private households (= general public =consumers)
Annual amount used: Unless otherwise stated use amounts up to 37500 g
Reg-15Rev.:05 (10-2011)Hoja: 12/12
ANEXO - FICHA DE DATOS DE SEGURIDAD SILICATO SÓDICO LÍQUIDO SUPER NEUTRO
4. RMMs that, in combination with the operational conditions of use, ensure control of risk
4.1 RMMs related to consumers
General
Organisational measures Not applicable.
5. Prediction of exposure resulting from the conditions described above and the substance properties.
Consumers (oral)
DNEL (oral, long term, consumers): 0.8 mg/kg bw/day
Exposure estimation (long term systemic effects):0.006 mg/kg bw/dayNo critical effects
Skin and eye irritation are prevented mainly by limiting sodium silicateconcentration in consumer products and by appropriate labellingincluding advice to use (household) gloves. In general, dermal,inhalation and oral consumer exposure are minimised due toformulation (limited concentration of soluble silicates, particle sizedistribution, agglomeration and dust potential, tablets and gels),packaging and bad taste of commercially available products.
Technical measures Not applicable.
Respiratory protection Not applicable.
Hand protection The use of gloves is recommended to avoid contact of the skin withthe undiluted product.
Eye protection The use of eye protection is recommended to avoid contact of theeyes with the undiluted product.
Skin and body protection Not applicable.
Hygiene measures Keep away from foodstuffs, drinks and tobacco. Wash hands thoroughlyafter open handling of the product.
4.2 Environment related measures; type and efficiency of single options or combination of options on exposure to be quantified;options to be phrased as instructive guidance
Not required, as soluble silicates, including sodium silicate, do not meet the criteria for classification as dangerous to the environmentaccording to 67/548/EEC (See Article 14.4 of REACH Regulation). Furthermore, as high production volume substances, soluble silicateshave been reviewed to a great extent for their exposure potential to the environment and the possible risks arising from their release (VanDokkum et al. 2002, OECD SIDS 2004, HERA 2005, and CEES 2008). It was concluded that soluble silicates are currently of low priorityfor further work because of their low hazard profile.
Consumers (dermal)
DNEL (dermal, long term, consumers): 0.8 mg/kg
Exposure estimation (long term systemic effects):0.231 mg/kg bw/dayNo critical effects
Consumers (inhalation)
DNEL (inhalation, long term, consumers): 1.38 mg/ m3
Exposure estimation (long term systemic effects):0.75 mg/m3No critical effectsExposure estimation (acute systemic effects):0.000042 mg/m3
Environment Not required.
6. Guidance to check compliance with the Exposure Scenario.6. Guidance to check compliance with the Exposure Scenario.
Predicted exposures are not expected to exceed the DN(M)EL when the Risk ManagementMeasures/Operational Conditions outlined in this exposure scenario are implemented.Where other Risk Management Measures/Operational Conditions are adopted, then users should ensure that risks are managed to atleast equivalent levels.