93

Ferber® and Ferber Textile Solutions ® Sono marchi registrati di:/ are registered Trade Marks owned by: / sont des marques déposées appartenant à: sind eingetragene Warenzeichen von Besitz; / اهكلمت يتلا ةيراجتلا تامالعلا ليجست متي son marcas registradas propiedad de: / são marcas registradas de propriedade da / marka sahibi kayıtlıdır: /являются зарегистрированными товарными знаками, принадлежащими компании; GIOBBE S.r.l., Via Primo Maggio, 33 - 23873 Missaglia – Italy email: info@giobbeautomation.com P.IVA-VAT 01665640130 Technical Assistance: ferberassistenza@giobbeautomation.com

 

 

 80

AST tangential

A tangential automatic on-loom winder, at the lower front of the weaving machine, is the ideal solution for winding small cloth rolls up to 420 mm diameter, without changing external weaving machine dimensions. Electronic "ON-OFF" permit the management of all the winding functions safety and automatically. Cloth roll doffing is very simple, even in narrow aisles.

Special versions with Inverter drive are available Special versions with Electronic load cell are available

Fabric width From 1800 mm To 5400 mm Max. cloth roll diameter 420 mm Max. weight capacity 500 Kg

 

 

 81

ES 03 basic tangential

Tangential automatic cloth roll take-up devices to wind large cloth rolls at the weaving machine. The standard model controls fabric tension by means of an elastic compensator and microswitches for starting and stopping. An exceptional range of accessories permits a versatile winder for an extensive variety of cloth styles.

Fabric width From 1800 mm To 5400 mm Max. cloth roll diameter 1000 mm To 1400 mm Max. weight capacity 2000 Kg

Motorization

 

TangentiaThe windeAn except

Max. Max

al automatic cer controls fational range o

Fabric widcloth roll d. weight ca

E

cloth roll takeabric tension of accessorie

dth iameter

apacity

S 03

e-up devicesby means ofes permits a

F

3-I

s to wind largf an electronversatile win

From 1800 1000 mm2000 Kg

 

ta

ge cloth rolls ic continuounder for an e

mm m g

angential

at the weavis regulator w

extensive var

ng machine.with Inverter riety of cloth

To 5400 mTo 1400 m

 

82

driven motostyles.

mm mm

 

or.

 

 

 83

ES 03-LC tangential

  Tangential automatic cloth roll take-up devices to wind large cloth rolls at the weaving machine. The winder controls fabric tension by means of a continuous and accurate electronic regulator by load cells, master encoder input & output.

programmable inputs for speed reference and torque control programmable inputs for load cell, analogic sensor and potentiometer EEPROM for configuration parameters backup display monitor predisposed for having keyboard and display remote-controlled communication protocol for PC, Profibus, Canbus, Ethernet

An exceptional range of accessories permits a versatile winder for an extensive variety of cloth styles.

Fabric width From 1800 mm To 5400 mm Max. cloth roll diameter 1000 mm To 1400 mm Max. weight capacity 2000 Kg

 

 

 84

ES 03 tangential with fabric inspection table and/or automatic fabric roll ejection

Fabric width From 1800 mm To 5400 mm

step

 

 

 85

ES 63 tangential Tangential automatic cloth roll take-up devices to wind large cloth rolls at the weaving machine, with fabric edges overlapping system. Forward/reward alternated movement system for alternative overlapping of selvage, with variable stroke and adjustable linkwork connected to the wrapping transmission. The lap machine is supported by support bearings on guides to be ground fixed

   

Fabric width From 1800 mm To 5400 mm Max. cloth roll diameter 1000 mm To 1400 mm Max. weight capacity 2000 Kg

 

 

 86

  

ES 63 M tangential    

Tangential automatic cloth roll take-up devices to wind large cloth rolls at the weaving machine where the fabric tension and the weight are high

Fabric width From 1800 mm To 5400 mm

Max. cloth roll diameter 1000 mm To 1400 mm Max. weight capacity From 2000 Kg To 4000 Kg

 

 

 87

ES 64 tangential

Tangential automatic cloth roll take-up devices, diameter of the winding cylinders 220 mm, to wind large cloth rolls at the weaving machine where the fabric tension and the weight are high.

-Curved bar for cloth extension

.

Fabric width From 1800 mm To 5400 mm Max. cloth roll diameter 1000 mm To 1500 mm Max. weight capacity 3000 Kg

 

 

 88

ACC 03 tangential

Tangential automatic cloth roll take-up devices, diameter of the winding cylinders 190 mm, to wind large cloth rolls at the weaving machine

ACC 03 batching motions are the ideal solution for those who aim at inspecting all the fabric, winding it in big rolls. A first step consists in receiving the fabric directly from the loom and storing it in a special device. Then, under an operator’s control, let it go through a lighted table to inspect it and finally wind it in rolls with up to 1200 mm diameter.

.

Fabric width From 1800 mm To 5400 mm Max. cloth roll diameter 1000 mm To 1200 mm Max. weight capacity 1500 Kg

 

 

 89

TSV 05 tangential

Fabric width From 1800 mm To 5400 mm

Max. cloth roll Ø 1000 mm To 1200 mm

Weight capacity 2000 Kg

 

 

 90

AS 03 axial

Batching motion for technical fabrics with whole winding tension control. Integrated control panel with setting recording option for each article which is being proceeded. Accessories for the fabric inspection and control are available      

Fabric width From 1800 mm To 2800 mm

Max. cloth roll Ø 1000 mm

Weight capacity 2000 Kg

 

 

 91

AS 02 axial

Batching motion for technical fabrics with whole winding tension control. . Accessories for the fabric inspection and control are available        

Fabric width From 1800 mm To 2800 mm

Max. cloth roll Ø 1000 mm

Weight capacity 2000 Kg

 

 

 92

AS 01 axial

Fabric width From 1800 mm To 2500 mm

Max. cloth roll Ø 1000 mm

Weight capacity 2000 Kg

A frame moved by FERBER TRS truck