Eurotech Rapido
-
Upload
cnc-systems -
Category
Documents
-
view
227 -
download
0
Transcript of Eurotech Rapido
8/6/2019 Eurotech Rapido
http://slidepdf.com/reader/full/eurotech-rapido 1/1
Some of the savings and com-pe��ve advantages of a Euro-tech Rapido over a Swiss stylemachine are:
Save material because bar rem-nants are less than half the length
of machines with guide bushings
Easily run non-round bar, including
hex and extruded stock.
Load chucked parts, blanks, forg-
ings and casngs.
Hold ght roundness toleranceswith ease.
Reduce cycle mes by running at
higher RPM.
Turn parts using mulple passes.
Drill deep holes with ease.
Eliminate most chip control issues.
Take heavy cuts with 15 HP.
Great access for setup and operator.
Runs Faster, Sleeps Less
In a nutshell ; Faster cycle �mes, Faster setup �mes with more flexibility.
tel: 352-799-5223 | [email protected] | fax: 352-799-5446
Its Faster....... ‘Triplo’ sub-spindle and so�ware - delivers3- tools in the cut
Eurotech gap eliminaon 7000 rpm on the main spindle 7000 rpm on the sub-spindle Index me 0.1 - bidireconal servo turrets
Its Powerful.. 15 Horsepower on the main and sub-spindle
Rigid fixed head stock design
Its Compact.. Minimal Floor Space - 149” x 55” Great access for fast, easy setup
Great chip flow with no shelves
T U R N / M I L L M A C H I N I N G C E N T E R
Eurotech Rapido 10-Axis Manufacturing Cell
Programmable
Parts Catcher and
Parts Conveyor
System
(2) 12 sta�on
Turrets with
1.97” of Y-AxisStroke
Great
Ergonomics
Compact footprint: 149” x 55”