EUROPEAN CURRICULUM VITAE FORMATptf.unze.ba/wp/wp-content/uploads/2018/05/CV-Alagic.pdfPage 1 -...

- Curriculum vitae of ALAGIĆ Ismar

For more information go to www.cedefop.eu.int/transparency www.europa.eu.int/comm/education/index_en.html www.eurescv-search.com

PERSONAL INFORMATION

Name ISMAR ALAGIĆ

Address Mustafe Ćemana 24, BA-74264 Jelah, Tešanj, Bosnia and Herzegovina Telephone +387 (32)65 0 022; 65 06 08; 65 03 90 (business); +387 (32)66 62 86 (home);

Cell: +387(61)79 28 08; 62 99 30 55 Fax +387 (32)650220; 65 03 90

E-mail [email protected]; [email protected]; [email protected]; [email protected]

Skype: ismar_alagic, LinkedIn: Ismar (Dr.sci.) Alagić,

Twitter: @IsmarAlagicDr, Facebook: Ismar Alagic, Novi Profil

Nationality Bosnia and Herzegovina (Bosniak)

Date of birth Gender

December 28, 1973. Male

July 2013-Onwards TRA Tešanj Development Agency,Trg Alije Izetbegovića 11, BA-74260 Tešanj, B&H Local Development Agency Proffesional associate - Expert for European Integration -Managing of Project Implementation Team “Water supply and sanitation in

Tešanj Municipality” - Recruiting, selecting and developing members of Municipal Development Council; -Developing a strategic plan for local economic development – Economical Division; -Identifying, developing and directing the implementation projects from Development Strategy of Municipality Tešanj for access to funding; -Establishing of International cooperation; -Promoting local authority to local, regional, national, and international constituencies; -Build a fundraising network using personal contacts, direct mail, special events, and foundation support;

E U R O P E A N C U R R I C U L U M V I T A E

F O R M A T

WORK EXPERIENCE

Dates (from – to) Name and address of employer Type of business or sector Occupation or position held Main activities and responsibilities



Dates (from – to)

July 2009 – July 2013

Name and address of employer

Municipality Tešanj, Trg Alije Izetbegovića 11, BA-74260 Tešanj, B&H

Type of business or sector

Local Authority

Occupation or position held Main activities and responsibilities

Advisor of Mayor for access to EU funding -Managing of Municipal Development Team; - Recruiting, selecting and developing Team members; - Developing a strategic plan for local economic development; -Identifying, developing and directing the implementation projects from Development Strategy of Municipality Tešanj for access to funding; - Planning and directing the organization’s activities to achieve stated/agreed targets and standards for economic performance, quality, culture and legislative adherence. -Establishing of International cooperation; - Promoting local authority to local, regional, national, and international constituencies; -Build a fundraising network using personal contacts, direct mail, special events, and foundation support; -Developing organizational culture, values and reputation in its contacts and with all staff, partners and regulatory/official bodies.


January 2009-June 2009 ARTECO Wood Technology Center Ltd, Medakovo bb, BA-74260 Tešanj, B&H Wood Technology Center CEO (Chief Executive Officer), Managing Director -Setting up ARTECO legal entity in accordance with national by laws; -Responsible for management of ARTECO;

-Responsible for implementation of ARTECO business policy, according to the vision and strategy of EI project;

-To promote ARTECO activities among target group; -Expansion of customer target group; -Providing leadership to position the company at the forefront of the wood processing industry.; -Propose ideas related to marketing activities and hire of external associates; communicate with representatives from printing and electronics media in relation to issues important to ARTECO; -Responsible for specifying additional educational contents; -Responsible for preparation and realization of 3D CAD modeling and design related education, together with ARTECO Technical Manager; -Responsible for preparation and realization of CNC machine operations training, together with ARTECO Technical Manager; -Responsible for hiring of all required external associates; -Preparation of material for ARTECO web site; -Responsible for preparation and implementation of analysis related to customer satisfaction; -Business operation analysis;

- Reporting to shareholders/parent board on organizational plans and performance; - Execute the responsibilities of a company director according to lawful and ethical standards, as referenced in Charter of establishment.




March 2005-December 2008 REZ Ltd Zenica, REZ Regional Development Agency for Central B&H Region Štrosmajerova 11/III, BA-72000 Zenica, B&H Regional Development Agency Advisor of Director, Technology and Cluster Manager - Coordinated Wood processing Cluster in Central B&H region and developed links and relationships with CCA USAID project and wood processing companies and institutions and programs working on similar issues in the region of South East Europe (SEE); -Coordinating Technology Park Capacity Building in the region of Central BiH; -Coordinating Wood Technology Center Building in the region of Central BiH; -Responsible for preparation and realization of CNC machine operations training; - Managed the process of doing Feasibility Study on Wood Waste Utilisation as renewable source of energy in Central B&H region; -Monitoring the process of doing Feasibility Study on Wood Waste Utilisation as renewable source of energy in Northern Montenegro region;

Key Achievements: -Successfully took part in implementation CCA USAID project, Wood-processing and forestry Cluster in Central B&H region; -Co-Author of document are as follows: 1) I Alagić, A.Abramušić:"Analysis of the existing production technologies level in wood processing industry and specification of needs“, REZ Regional Development Agency Central BiH region, 2005, Zenica, Bosnia and Herzegovina (Available at:: www.rez.ba) 2) I. Alagić, A.Abramušić:"Analysis of the available working force in wood processing industry compared with the industry needs“, REZ Regional Development Agency Central BiH region, 2005, Zenica, Bosnia and Herzegovina (Available at:: www.rez.ba) 3) I. Alagić and others:"Feasibility study of waste wood commercial utilization in Central Bosnia and Herzegovina as a resource recovery and economic development project in the region", REZ Regional Development Agency Central BiH region, 2006. (Available at:: www.rez.ba)



February 2001-February 2005 FAD Jelah-Tešanj, Titova bb, BA-74264 Jelah, Tešanj, B&H Automotive Industry, Automobile parts, Braking system and wheel transmission parts Chief Manager of R&D and Engineering Department -Developing methodological instruction on standard products and a new products development process; -Getting new clients;

-Preparing and managing projects’ plans (resources, tasks, dead lines, inputs and outputs); -Implementation of projects in the field (Consulting on QMS implementation according to customer specific requirements (ISO/TS 16949,VDA 6.1, EQQF, etc.) Design of Production Systems, Business Plan Preparation; Feasibility Study Preparation; Support to Development of SMEs; Engineering, Consulting, Training, Monitoring; Reengineering of Manufacturing Systems etc.) with particular focus in the automotive sector and metalworking industry; -Developing training materials (course curricula, participant’s hand outs, cases, tests, teacher’s notes); -Delivering training programs (mostly to senior management staff of automotive enterprises); -Improving and customizing the QMS

according to specific customer requirements;

September 1998-Februar 2001 Pobjeda Tešanj, Bukva bb, BA-74260 Tešanj, B&H

Automotive industry, Pumps and filters (gear pumps) Main Designer (Oil gear pump), R&D Department -Developing a new product; -Testing of gear pumps.

Dates (from – to) Name and address of employer Type of business or sector Occupation or position held Main activities and responsibilities Dates (from – to)

Name and address of employer Type of business or sector Occupation or position held Main activities and responsibilities



November 2001-May 2005 (Part-time engagement) University of Sarajevo, Faculty of Mechanical Engineering in Zenica,

Fakultetska 1, BA-72000 Zenica, B&H University, Chair: Production System and Industrial Engineering Assistant Lecturer and investigator June 2005-Januar 2010. (Part-time engagement) University of Zenica, Faculty of Mechanical Engineering in Zenica,

Fakultetska 1, BA-72000 Zenica, B&H University, Chair: Computer Integrated Manufacturing and Industrial Engineering Senior Assistant Lecturer and investigator

Dates (from – to) Name and address of employer Type of business or sector Occupation or position held Main activities and responsibilities Dates (from – to) Name and address of employer Type of business or sector Occupation or position held Main activities and responsibilities

Dates (from – to) Name and address of employer

January 2010.-onwards(Part-time engagement) University of Zenica, Faculty of Mechanical Engineering in Zenica,

Fakultetska 1, BA-72000 Zenica, B&H

Type of business or sector

University, Chair: Production System and Industrial Engineering, Subject: Disassembly and assembly technology

Occupation or position held

Assistant Professor

Main activities and responsibilities Lecturer and Investigator Dates (from – to)

February 2006-November 2008

Name and type of organisation providing education and training

University “Džemal Bijedić” in Mostar, Faculty of Mechanical Engineering in Mostar

Principal subjects/occupational skills covered

Contribution to Development of Model for Quality System Assessment within Supply Chain Management of Automotive Industry Economics and Organisation, Quality Management System

Title of qualification awarded

PhD.

Level in national classification

Doctor of Technical Science (Dr.sc.)



Dates (from – to) September 1998 – June 2004 Name and type of organisation University of Zenica, Faculty of Mechanical Engineering in Zenica providing education and training Principal subjects/occupational Designing of Metrology System as a part of Quality Assurance System in Company from skills covered Automotive Industry, Quality Management Title of qualification awarded MSc. Level in national classification Master of Technical Science (Mr.sc.) Dates (from – to) December 1992 – August 1998 Name and type of organisation University of Sarajevo, Faculty of Mechanical Engineering in Zenica providing education and training Principal subjects/occupational Study of Optimal Selection for Modern Diesel Engine, power 80/100 kW concerning Achievement “The best” Efficiency Coefficient of Engine, Production Mechanical Engineering- skills covered Automotive Industry Title of qualification awarded BSc. Level in national classification Bachelor of Mecahnical Engineering (Dipl.ing.maš.) Dates (from – to) Name and type of organisation providing education and training Principal subjects/occupational skills covered Title of qualification awarded Level in national classification Dates (from – to) October 2013. Name and type of organisation GIZ, Germany providing education and training Principal subjects/ Building Bridges, Transforming Public Administration in Eastern Europe skills covered and Central Asia, Berlin, Germany Title of qualification awarded Certificate of attendance (Successfully completed course) Level in national classification -



Dates (from – to) October 2013 Name and type of organisation GIZ Prolocal, BERCON Croatia, Kaja Consulting, Čakovec, Croatia providing education and training Principal subjects/ IPARD, Rural Development (Project management) skills covered Title of qualification awarded Certificate of attendance (Successfully completed course and exam) Level in national classification - Dates (from – to) September 2013 Name and type of organisation NALAS,Association of Cities and Municipalities in South East Europe providing education and training Principal subjects/ NEXPO 2013 Fair, Rijeka/Opatija, Croatia skills covered Title of qualification awarded Certificate of attendance (Successfully completed attendance) Level in national classification - Dates (from – to) September 2013 Name and type of organisation GIZ, Mesopartner, Berlin, Germany providing education and training Dugopolje, Croatia

Principal subjects/occupational 1st School on Local Economic Development skills covered Title of qualification awarded Certificate of attendance (Successfully completed course) Level in national classification - Dates (from – to) May 2013 Name and type of organisation COWI, Federal Ministry for agriculture, forestry and water supply, providing education and training Vlašić , Bosnia and Herzegovina Principal subjects/occupational Water supply and sanitation in Federation of Bosnia and Herzegovina, Project management (implementation, finance, report) Title of qualification awarded Head of Project Implementation Team, Certificate of attendance - (Successfully completed course) -30 hours Level in national classification - Dates (from – to) April 2013 Name and type of organisation Foreign & Commonwealth Office UK, Ministry of Foreign Affairs BiH, Embassy of BiH in UK, providing education and training FIPA, UK Trade & Investment, Developing Markets Associates, London, United Kingdom Principal subjects/ UK-Bosnia and Herzegovina Trade & Investment Forum 2013, London skills covered Title of qualification awarded Certificate of attendance (Successfully completed panel and presentation) Level in national classification -



Dates (from – to) October 2012 Name and type of organization European Commission, The Committee of the Regions, TAIEX, providing education and training DG Enlargement, Brussels, Belgium Principal subjects/occupational Seminar on EU Regional Policy skills covered Title of qualification awarded Certificate of attendance (Successfully completed course)

- Dates (from – to) October 2012. Name and type of organization 3E, UNDP-MDGF, providing education and training Technology Park, Mostar Principal subjects/occupational Energy Management in Buildings and Green Office, Energy Efficiency skills covered Title of qualification awarded Certificate of attendance

- Dates (from – to) September 2012. Name and type of organization 3E USAID, UNDP-MDGF providing education and training Faculty of Technology, Faculty of Mechanical Engineering, University of Tuzla Principal subjects/occupational Energy Management in Buildings and Green Office Practices skills covered skills covered Title of qualification awarded Certificate of attendance (Successfully completed course)

-

Dates (from – to) February 2013. Name and type of organisation European Commission, The Committee of the Regions, TAIEX, DG Enlargement, providing education and training Brussels, Belgium Principal subjects/occupational Seminar on EU Energy policy at local level skills covered Title of qualification awarded Certificate of attendance (Successfully completed course) Level in national classification - Dates (from – to) November 2012. Name and type of organisation Government of Croatia, Office of the Croatian Association, providing education and training Zagreb/Varaždin, Croatia Principal subjects/occupational Europe for Citizens, Regional Forum (Central and South East European Countries) skills covered Title of qualification awarded Certificate of attendance (Successfully completed course) Level in national classification -






Dates (from – to) June 2012. Name and type of organization European Commission, The Committee of the Regions, TAIEX, providing education and training DG Enlargement, Brussels, Belgium Principal subjects/occupational Seminar on Sustainable Tourism and the role of local authorities skills covered Title of qualification awarded Certificate of attendance (Successfully completed course)

- Dates (from – to) October 2011-June 2012 Name and type of organization EPTISA providing education and training Principal subjects/occupational DELTER Support to meet the requirements of the Energy Community Treaty skills covered for SEE focusing on Energy Efficiency (EE) and Renewable Energy (RE) Title of qualification awarded Municipal Project Leader Certificate of attendance (Successfully completed course) Level in national classification - Dates (from – to) April 2012. Name and type of organization Tianjin TEDA Group Co., Ltd., China, Ministry of Commerce of China, Tianjin, China providing education and training Principal subjects/occupational Seminar on the Construction and Management of Development Area for Central skills covered and Eastern Europe Countries Title of qualification awarded Certificate of attendance (Successfully completed course-Final report/presentation-exam)

- Dates (from – to) March 2012. Name and type of organization GDI GISDATA Serbia, Belgrad / Sarajevo Bosnia and Herzegovina, providing education and training ESRI Authorised Training, Training & Support Center Principal subjects/occupational GIS (Geographic Information System), ArcGIS Desktop II:Tools and functionality; skills covered ArcGIS Desktop III: GIS processes and analysis Title of qualification awarded Certificate of attendance (Successfully completed course-Final report/exam) Level in national classification - Dates (from – to) December 2010.-June 2012. Name and type of organization MDGF Culture for Development, Improving Cultural Understanding in Bosnia and providing education and training Herzegovina, UNDP, UNESCO, UNICEF Principal subjects/occupational Municipal Project Leader skills covered Title of qualification awarded Certificate of attendance (Successfully completed course-Final report/presentation) Level in national classification -





Dates (from – to) October 2011. Name and type of organization CIFAL & UNITAR United Nations Institute for Training and Research, Plock, Poland providing education and training Principal subjects/occupational International conference and workshop „Planning for Sustainable Urban Development” skills covered Title of qualification awarded Certificate of attendance Level in national classification - Dates (from – to) November-December 2010. Name and type of organization CIFAL & UNITAR United Nations Institute for Training and Research, Plock, Poland providing education and training Principal subjects/occupational International conference and workshop „Urban wastewater management with a focus skills covered on rainwater systems” Title of qualification awarded Certificate of attendance Level in national classification -

Title of qualification awarded Certificate of attendance (Successfully completed course-exam) - Key User Level in national classification - Dates (from – to) April 2007-May 2007 Name and type of organization University of Applied Sciences Berne - Architecture, providing education and training Wood and Civil Engineering, Biel, Switzerland. Principal subjects/occupational Strengthening of research, development and training capacities; skills covered Wood industry, Bosnia & Herzegovina- Centre of Excellence Title of qualification awarded Certificate of attendance

Dates (from – to) April 2010. Name and type of organisation CIFAL & UNITAR United Nations Institute for Training and Research, Plock, Poland providing education and training Principal subjects/occupational International conference and workshop „Public-Private Partnership in Investements in skills covered Central and Eastern Europe“ Title of qualification awarded Certificate of attendance Level in national classification - Dates (from – to) March 2009. Name and type of organisation IB-Caddy d.o.o. Ljubljana, Slovenia; Authorised Training, Training & Support Center providing education and training Principal subjects/occupational SolidWorks Essentials, 3D-CAD (30 hours) skills covered Title of qualification awarded Certificate of attendance (Successfully completed course) – Key user Level in national classification -



Level in national classification - Dates (from – to) May 2004 Name and type of organization Algor, Center for Mechanical Simulation technology, Pittsburgh, USA providing education and training Principal subjects/occupational Distance Learning Algor Software Web Course-Fluid Flow Analysis skills covered Title of qualification awarded Certificate of attendance (Successfully completed course-exam) - Key User

Dates (from – to) October 1999 – March 2000 Name and type of organization Debus (Olomouc, Czeck Republic), ITS (Ljubljana, Slovenia), Alden Data (Sarajevo, B&H) providing education and training Principal subjects/occupational Baan IV C, Enterprise Resource Planning Software, Training for Key User skills covered Title of qualification awarded Certificate of attendance (Successfully completed course-exam) - Key User Level in national classification -

Level in national classification Dates (from – to) October 2002 – November 2003 Name and type of organisation Centro Ricerche e Studi Direzionali-CERISDI, Mondimpresa, Ministry of Foreign Affairs of Italy, providing education and training Cooperacione Italiana, EIC Network, Region Sicilia, Politecnico di Torino, Dipartimento di Sistemi di Produzione ed Economia della Azienda, Camera di Commercio Industria Artigianato e Agricoltura di Torino, Camera di Commercio Industria Artigianato e Agricoltura di Palermo, Italy Principal subjects/occupational Project INTEGRA, “A MEDITERRANEAN AND BALKAN NETWORK FOR SMEs”, skills covered Creation of SME's network in Mediterian Basin, Midlle and Near East Countries and Balcan Area Title of qualification awarded Certificate of attendance Level in national classification - Dates (from – to) June 2002 – July 2002 Name and type of organisation Northern Advancement Center for Science & Technology, Sapporo, JICA, Japan providing education and training Principal subjects/occupational Production Management for Eastern European Countries skills covered Title of qualification awarded Certificate of attendance Level in national classification -



Bosnian English Excellent Excellent Excellent Italian Good Good Good Turkish Basic Basic Basic Russian Basic Basic Basic Team work: I have worked in different types of projects in different developed countries supported from companies and government.

Good communicator ; Ability to collaborate with cross functional staff teams, senior managers,

board members, and community representatives; Capable of developing and maintaining successful customer relationships; Outstanding interpersonal communication and presentation ability and

team work drive; Able to contribute to business planning at a strategic level; Excellent applied marketing research skills; Excellent conflict resolution skills; Consistently approaches work with energy and a positive, constructive

attitude; Demonstrates strong oral and written communication skills; Builds strong relationships with clients and external actors; Ability to lead business processes re-engineering, implementation of new

systems (business side), and affect staff behavioral/ attitudinal change.

PERSONAL SKILLSAND COMPETENCES

.

MOTHER TONGUE

OTHER LANGUAGES

• Reading skills

• Writing skills • Verbal skills

OTHER LANGUAGES

• Reading skills


OTHER LANGUAGES

• Reading skills


OTHER LANGUAGES

• Reading skills• Writing skills• Verbal skills

SOCIAL SKILLS AND COMPETENCES

.



ORGANISATIONAL SKILLS

AND COMPETENCES

Member of following professional bodies: Inst tute for Standardization, Metrology and

Intellectual Property, Bosnia and Herzegovina, member of TC/35 Road Vehicles, WG 35/2 Standardization

Member of Organizing International Programme Committee, International Conferences: MECAHITECH '09 and WESIC'08 in Bucharest, Romania and Techno-Educa 2007, 2008 and 2009 in Zenica, Bosnia and Herzegovina

Results-oriented Ph.D. level professional team player dedicated to achieving organizational goals

Goal-driven performer focused on continuous improvement and learning Versatile, willing and keen to learn, acquires new skills quickly Results driven “Can Do Attitude” with the focus on total task accomplishment. Open to relocation and field work.

Technical skills and competences

Competent with 3D-CAD and CAM applications; Competent with CNC programming and operate with CNC machine; Competent with QMS requirements (ISO 9001, ISO 14001, ISO/TS 16949; VDA 6.1,

EAQF, AVSQ, QS 9000, FSC, CoC, HACCP, etc.); Competent with wood products testing procedure; Ability to lead strategic planning, results-based management and reporting; Demonstrated ability to conduct competitive analysis and discern factors at the root cause

of changes in a business environment by utilizing knowledge of social, economic, legal, and political factors that influence customer behavior and demand fluctuations;

Ability to identify and analyze trends, opportunities and threats; Strong work ethic and effective organizational skills to plan and organize; Committed to revenue growth and providing superior customer service; Focused on impact and result for the client and responds positively to critical feedback; Excellent drafting and presentation skills ; Ability to plan and organize work ; Strong negotiating skills; Ability to work with minimum supervision

Computer skills and competences

Computer-literate performer with demonstrated extensive technical proficiency in a wide range of software applications and programs including: the entire MS Office Suite (including VISIO, Project),

Corel, Baan (ERP-DEM software application) AutoCad, Mechanical Desktop, Inventor, , SolidWorks (3D-CAD) Algor (FEM software), SolidCAM (CAM application), CNC programming.

Artistic skills and competences Music, Reading and visiting art galleries and museum all round he world. Enjoy all sports

particularly football, basketball and skiing. Love to travel and experience different countries, nations and culture.

Key Competencies Regional Economic development, Business infrastructure Development, SME sector Development,

SME infrastructure development, SME Business Incubation,

Driving licence(s) “B” with clean driving record

ADDITIONAL INFORMATION



ANNEXES Publications and Seminars, Consultancy, Membership of International, List of scientific-research articles :

List of research and feasibility studies are as follows:

1. D.Petković, I.Alagić etc.:" Feasibility study of establishment of Science-Technology Park in Zenica“, team member, University of Sarajevo, Faculty of Mechanical Engineering in Zenica, 2003, Zenica, Bosnia and Herzegovina.

2. I Alagić, A.Abramušić:"Analysis of the existing production technologies level in wood processing industry and specification of needs“, author, REZ Regional Development Agency Central BiH region, 2005, Zenica, Bosnia and Herzegovina (More info: www.rez.ba )

3. I. Alagić, A.Abramušić:"Analysis of the available working force in wood processing industry compared with the industry needs“ author, REZ Regional Development Agency Central BiH region, 2005, Zenica, Bosnia and Herzegovina (More info: www.rez.ba )

4. I. Alagić and others:"Feasibility study of waste wood commercial utilization in Central Bosnia and Herzegovina as a resource recovery and economic development project in the region", chief of project team and author, REZ Regional Development Agency Central BiH region, 2006. (More info: www.rez.ba )

5. Alagić I., Korjenić I., IDENTIFICATION OF HIGH IMPACT ICTS AS E-BIZ CENTER CORE OFFERINGS: WOOD SECTOR, BRIEFING PAPER, EXCELLENCE IN INNOVATION PROJECT, USAID/BIH EXCELLENCE IN INNOVATION DOT-ORG COOPERATIVE AGREEMENT AWARD NO. 168-A-00-07-00101-00 AND ROYAL MINISTRY OF FOREIGN AFFAIRS, NORWAY GRANT Project number 2070065, June 6, 2008

6. I.Alagic:“ „Final report on the results of Evaluation of market and production potential in the wood processing sector in BiH and Evaluation of BiH companies for participationin SIPPO match making activities 2009-2011“, Swiss Import Promotion Programe, SIPPO, July 2008.

7. I.Alagic:“ „Final report on the results of GAP Analysis of the wood processing sector in Bosnia and Herzegovina“, Swiss Import Promotion Programe, SIPPO, December 2008.

8. I.Alagic: :"Feasibility study of waste wood commercial utilization in Northern Montenegro as a resource recovery and economic development project in the region", Monitor, CHF Montenegro, FORS Montenegro, 2007.

9. I.Alagić: “Analysis of craft and entrepreneurship in Žepče Municipality”, RAŽ Local Development Agency, Federal Ministry of Development, Entrepreneurship and Craft, Bosnia and Herzegovina 2013.

10. I.Alagić: “Analysis of women role in rural areas of FBiH – Case study of Tešanj Municipality and Action Plan of intervention for period 2014-2016”, Association of VESTA, UN WOMEN, ADA Austrian Development Agency, 2013.

Consultancy: 1. Garant Möbel Akademie, Innotech Holztechnologien GmbH, Berlin,

Germany, 2006-2007. 2. Wood Technology Center, Exellence in Innovation, Education

Development Center, Boston, USA, 2008. 3. Cluster Competitiveness Activity, USAID, B&H, 2005-2008. 4. SIPPO Programe for Wood Industry, Swiss Import Promotion Programe

SIPPO, Osec, Zurich, Switzerland, 2008. 5. FORS Montenegro, CHF Montenegro, Waste wood commercial

utilization in Northern Montenegro as a resource recovery and economic



development project in the region, Montenegro, 2007. 6. RAŽ Local Development Agency, Federal Ministry of Development,

Entrepreneurship and Craft, Žepče/Mostar, Bosnia and Herzegoviona, 2012.

7. Association Vesta Tuzla, Bosnia and Herzegovina, june-september 2013.

MEMBERSHIP:

1. EU Support to Institutional Capacity Building for Regional and Local

Economic and SME Development, Bosnia and Herzegovina, Membership of the Project Steering Committee, 2009- Onwards

2. IPA Cross Border Programme Serbia-Bosnia and Herzegovina, Membership of the Joint Monitoring Committee, 2010- Onwards

3. Association of Municipalities and Cities of the Federation of Bosnia and Herzegovina, The Commission for International Relations, Cooperation and European Integration, Membership of the Commission for International Relations, Cooperation and European Integration, 2009- 2013

4. Association of Municipalities and Cities of the Federation of Bosnia and Herzegovina, The Commission for International Relations, Cooperation and European Integration, President of the Commission for International Relations, Cooperation and European Integration, 2013-onward

Membership of Mr.Alagić Ph.D.- International Programme Committee, International Conference:

1. MECAHITECH '12, 4th 3rd International Conference on Innovations, Recent Trends and Challenges in Mechatronics, Mechanical Engineering and New High-Tech Products Development, Bucharest, Romania, September/October 2012. 2. MECAHITECH '11, 3rd International Conference on Innovations, Recent Trends and Challenges in Mechatronics, Mechanical Engineering and New High-Tech Products Development, Bucharest, Romania 22 - 23 September 2011. 3. MECAHITECH '10, 2nd International Conference on Innovations, Recent Trends and Challenges in Mechatronics, Mechanical Engineering and New High-Tech Products Development, Bucharest, Romania, 23-24 September 2010. 4. WESIC'08 International Conference, 6th Workshop on European Scientific and Industrial Collaboration on promoting Advanced Technologies in Manufacturing WESIC'08, Bucharest, Romania, 25-26 September 2008. 5. MECAHITECH '09, 1st International Conference on Innovations, Recent Trends and Challenges in Mechatronics, Mechanical Engineering and New High-Tech Products Development, Bucharest, Romania, 8-9 October 2009.

List of scientific-research work are as follows:

1. Ekinović S., Alagić I., Hodžić N., Kovačević M.: “Experimental Modelling of Gear Pump (120 47 000 type) Flow“, 2nd International Symposium, Revitalization and Modernization of Production, RIM'99, Proceedings, University of Bihać , Faculty of Technical Engineering in Bihać, Bosnia and Herzegovina, 1999.

2. Alagić I.: “Quality Control Tools in Application-through example of external mechanical grinding of sleeve diameter driving gear of high pressure 6 50 351 128 to diameter Ø18e6 “, 1st Research-Expert Conference “QUALITY '99”, Proceedings, University of Sarajevo, Faculty of Mechanical Engineering in Zenica, B&H, 1999.

3. Alagić I.: “Theoretical and Experimental Determination Flow Capacity of Oil Gear Pump in Lubrication System of Internal Combustion Engine“, 5th International Research/Expert Conference Trends in



the Development of Machinery and Associated Technology, TMT 2002, Proceedings, Zenica , BiH, 2000.

4. Alagić I.:“The Basic Audit Characteristics in Suppliers System of Volkswagen AG Concern“, 5th International Conference System Quality Management, SQM 2001, Proceedings, Center for Quality, Faculty of Mechanical Engineering in Podgorica, Budva, Serbia & Montenegro, 2001.

5. Alagić I.: “Teoretical and Experimental Determination Volumetric Losses of Gear Pumps″, 3th International Symposium, Revitalization and Modernization of Production, RIM'2001, Proceedings, University of Bihać , Faculty of Technical Engineering in Bihać, Bosnia and Herzegovina, 2001.

6. Alagić I.: “Some approachs to theoretical-experimental determination flow capacity of gear pump”, 3th International Symposium, Revitalization and Modernization of Production, RIM'2001, Proceedings, University of Bihać , Faculty of Technical Engineering in Bihać, Bosnia and Herzegovina, 2001.

7. Alagić I.: “Program of Development and Application of Management Information System (MIS) Concepts (software BAAN IV) in company Pobjeda-Tesanj“, 3th International Symposium, Revitalization and Modernization of Production, RIM'2001, Proceedings, University of Bihać, Faculty of Technical Engineering in Bihać, Bosnia and Herzegovina, 2001.

8. Alagić I.: “ Integrated Information System as support to the Development and Implementation of TQM System“, 2nd International Research-Expert Conference “QUALITY '2001”, Proceedings, University of Sarajevo, Faculty of Mechanical Engineering in Zenica, Bosnia and Herzegovina, 2001.

9. Alagić I.: “Total Quality Management and standards ISO 9000:2000- A step into future“, 2nd International Research-Expert Conference “QUALITY '2001”, Proceedings, University of Sarajevo, Faculty of Mechanical Engineering in Zenica, Bosnia and Herzegovina, 2001.

10. Alagić I.: “Audit in the Supply Chain of Volkswagen AG“, 5th International Conference Dependability and Quality Management, DQM 2002, Proceedings, Research Center of Dependability and Quality Management, Proceedings, Belgrade, Serbia & Montenegro, 2002.

11. Alagić I.: “Business improvement through self assessment – The European model for business excellence“, 1st International Conference on Advanced Technologies for Developing Countries, ATDC 2002, Proceedings, University of Juraj Strossmayer in Osijek, Croatia, 2002.

12. Alagić I.: “Self assessment of Quality Management System (QMS) in automotive industry“, 1st International Conference on Advanced Technologies for Developing Countries, ATDC 2002, Proceedings, University of Juraj Strossmayer in Osijek, Croatia, 2002.

13. Alagić I.: “Mathematical-experimental modelling of flow capacity of gear pump (61319221 type) “, 6th International Research/Expert Conference Trends in the Development of Machinery and Associated Technology, TMT 2002, Proceedings, Neum , B&H, 2002.

14. Alagić I.: “New quality system standard ISO/TS 16949 for automotive supplier – QS 9000 Killer is coming “, 6th International Research/Expert Conference Trends in the Development of Machinery and Associated Technology, TMT 2002, Proceedings, Neum , B&H, 2002.

15. Alagić I.: “Basic characteristics and application of Baan Information system in automotive industry “, 6th International Research/Expert Conference Trends in the Development of Machinery and Associated Technology, TMT 2002, Proceedings, Neum , B&H, 2002.

16. Alagić I.: “ MANAGEMENT OF SMALL AND MEDIUM ENTERPRISES (SMEs) IN JAPAN “, 7th International Research/Expert Conference Trends in the Development of Machinery and Associated Technology, TMT 2003, Proceedings, Lloret de Mar, Barcelona , Spain, 2003.



17. Alagić I.: “ EXPERIENCE, ROLE AND IMPORTANCE OF SCIENCE AND TECHNOLOGY PARKS IN JAPANESE ECONOMY“, 4th International Symposium, Revitalization and Modernization of Production, RIM'2003, Proceedings, University of Bihać, Faculty of Technical Engineering in Bihać, Bosnia and Herzegovina, 2003.

18. Alagić I.: “ APPLICATION OF FMEA METHOD IN MACHINING PROCESS OF BRAKING DISK 1J0 615 601 “, 3th International Research-Expert Conference “QUALITY '2003”, Proceedings, University of Sarajevo, Faculty of Mechanical Engineering in Zenica, Bosnia and Herzegovina, 2003.

19. Alagić I.: “ QUALITY ASSURANCE OF MACHINING PROCESS OF BRAKING DISK 1J0 615 601 BY USING SPC QUALITY TECHNIQUES “, 3th International Research-Expert Conference “QUALITY '2003”, Proceedings, University of Sarajevo, Faculty of Mechanical Engineering in Zenica, Bosnia and Herzegovina, 2003.

20. Alagić I.: “DETERMINATION OF MACHINING CONDITION FOR OBTAINING REQUESTED THE SURFACE ROUGHNESS OF THE BRAKING SURFACE OF BRAKE DISC 1 J0 615 601-APPLICATION OF TAGUCHI METHOD“, 7th International Conference Dependability and Quality Management, DQM 2004, Proceedings, Research Center of Dependability and Quality Management, Belgrade, Serbia & Montenegro, 2004.

21. Alagić I.: “NEW TECHNOLOGY FOR CORROSION PROTECTION OF AUTOMOBILE PARTS - VISIBLE QUALITY“, 3rd INTERNATIONAL CONFERENCE «UPS 2004», Proceedings, Faculty of Mechanical Engineering and Computing, University of Mostar & Austrian Society of Engineers and Architects-OIAV & DAAAM International Vienna & Scientific and Technical Forum Mostar, B&H, 2004.

22. Alagić I.: “FINITE ELEMENT MODELLING OF WHEEL HUB AS A PART OF BRAKE SYSTEM” 8th International Research/Expert Conference Trends in the Development of Machinery and Associated Technology, TMT 2004, Proceedings, Neum , B&H, 2004.

23. Alagić I.: “DESIGN AND TESTING OF BALL JOINT PART No. 1 81 16 001 0 USING FEA” 8th International Research/Expert Conference Trends in the Development of Machinery and Associated Technology, TMT 2004, Proceedings, Neum , B&H, 2004.

24. Alagić I.: “FE-simulation research of static stiffness of braking disc No. 1J0 615 601 under the influence of the chucking process”, Međunarodni skup Informatika u proizvodnom i poslovnom okruženju IPOM, Zbornik radova, Viša tehnička škola, Doboj, Bosna i Hercegovina, 2004.

25. Alagić I.:”FE-simulation research of tensile proces test of the tie rod”, Međunarodni skup Informatika u proizvodnom i poslovnom okruženju IPOM, Zbornik radova, Viša tehnička škola, Doboj, Bosna i Hercegovina, 2004.

26. Alagic I. :“USING THE FINITE ELEMENT METHOD (FEM) IN ORDER TO OPTIMIZE OF CLAMPING FORCE FOR JAW-CHUCKS DURING MACHINING PROCESS OF THE BRAKE DISC”, 9th International Research/Expert Conference”Trends in the Development of Machinery and Associated Technology”, TMT 2005, Antalya, Turkey, 26-30. September, 2005.

27. Alagic I. : “APPLICATION OF TAGUCHI METHOD - DETERMINATION OF FLOW CAPACITY OF GEAR OIL PUMP FOR OPTIMIZATION OF INPUT WORKING CHARACTERISTICS”, 9th International Research/Expert Conference”Trends in the Development of Machinery and Associated Technology”,TMT 2005, Antalya, Turkey, 26-30. September, 2005.

28. Alagic I. :“THE ASSESSMENT OF QUALITY MANAGEMENT SYSTEM OF BASED ON VOLKSWAGEN’S SPECIFIC REQUIREMENTS“, 5th International Symposium, Revitalization and Modernization of Production, RIM'2005, University of Bihać, Faculty of Technical Engineering in Bihać, Bosnia and Herzegovina, 2005., (accepted article)



29. Alagic I. :““ITALIAN EXPERIENCE ABOUT SCIENCE TECHNOLOGY PARKS ”, 4. Research/Expert Conference with International Participation “Quality 2005”, 09-12 November 2005, Spa Fojnica, B&H

30. Alagic I. :“ CONTRIBUTION TO TESTING OF MODEL OF METROLOGY SYSTEM IN WORKING CONDITIONS OF BUSINESS SYSTEMS FROM AUTOMOTIVE SUPPLY CHAIN”, 4. Research/Expert Conference with International Participation “Quality 2005”, 09-12 November 2005, Spa Fojnica, B&H

31. M.Omanović, S.Oprašić, I.Pašalić, K.Mijanović, I.Alagić, E.Kinčić: “STRATEGIJA 7E NA PRIMJERU SLIVA RIJEKE BOSNE” 4th

Research/Expert Conference withInternational Participation"QUALITY 2005", Univerzitet u Zenici,University Erlangen Nuremberg,Asocijacija za kvalitet u BiH, Spa Fojnica, Bosnia and Herzegovina 09-12 November 2005.

32. Alagic I. "NEW TRENDS IN DEVELOPMENT OF SURFACE TECHNOLOGY REQUIRED BY AUTOMOTIVE INDUSTRY", VI Naučno/stručni simpozij sa međunarodnim učešćem ”METALNI I NEMETALNI ANORGANSKI MATERIJALI” Zenica, BiH, 27-28. april 2006.

33. Alagic I. “USING OF THE VOLATILE CORROSION INHIBITORS (VCI) TECHNOLOGY IN AUTOMOTIVE INDUSTRY", VI Naučno/stručni simpozij sa međunarodnim učešćem ”METALNI I NEMETALNI ANORGANSKI MATERIJALI” Zenica, BiH, 27-28. april 2006.

34. Alagić I., Ajkunić H.:"A place for knowledge based local sustainable development-7E concept", 2nd European Regional Economic Forum (EREF-2006), Proceedings, May-June 2006, Nova Gorica, Slovenia.

35. Alagic I. “TENSILE PROCESS TEST OF TIE ROD USING FEM SIMULATION”, 10th International Research/Expert Conference ”Trends in the Development of Machinery and Associated Technology, TMT 2006, University of Zenica, Faculty of Mechanical Engineering Engineering in Zenica, UPC Universitat Politecnica de Catalunya, Barcelona, Spain, BAHÇEŞEHIR ÜNIVERSITESI Istanbul ,Turkey, Barcelona-Lloret de Mar, Spain, 11-15. September 2006.

36. Alagic I. “AUTOMOTIVE INDUSTRY SPECIFIC REQUIREMENTS RELATED CORROSION PROTECTION OF PARTS", 10th International Research/Expert Conference ”Trends in the Development of Machinery and Associated Technology, TMT 2006, University of Zenica, Faculty of Mechanical Engineering Engineering in Zenica, UPC Universitat Politecnica de Catalunya, Barcelona, Spain, BAHÇEŞEHIR ÜNIVERSITESI Istanbul ,Turkey, Barcelona-Lloret de Mar, Spain, 11-15. September 2006.

37. Alagić I. :"Design of experiment application in analysis of gear oil pump flow capacity", 2. međunarodni skup Informatika u poslovnom menadžmentu i komunikacijama IPOM 2006, Saobraćajni fakultet i Viša tehnička škola u Doboju, 15-16. septembar 2006, hotel Kardijal, Teslić, Bosna i Hercegovina.

38. Alagić I. :"What is Toyota production system?", 2. međunarodni skup Informatika u poslovnom menadžmentu i komunikacijama IPOM 2006, Saobraćajni fakultet i Viša tehnička škola u Doboju, 15-16. septembar 2006, hotel Kardijal, Teslić, Bosna i Hercegovina

39. D.Petkovic, I.Alagic, S.Isakovic: "Stanje ljudskih resursa i drugih bitnih elemenata kao osnovni preduslov za početak rada i razvoj savremene livnice za automobilsku industriju u Zenici",CIMOS Dan Raziskav, 2. zbornik referatov, 17. november 2006., Koper, Slovenija

40. D Petkovic, S.Balic, A.Beros, H.Avdusinovic, I.Alagic : "Formiranje prototipne laboratorije za ljevarstvo u satavu Tehnološkog parka Univerzitet u Zenici", CIMOS Dan Raziskav, 2. zbornik referatov, 17. november 2006., Koper, Slovenija

41. Alagić I.:" Analysis of the available working force and training in wood processing industry in FBiH", 5. Research/Expert Conference with International Participation, “Quality2007”, Univerzitet u Zenici,



University Erlangen Nuremberg,Asocijacija za kvalitet u BiH, 06-09 June 2007, Neum, B&H

42. Alagić I.:" Analysis of the existing production technologies level in wood processing industry in FBiH and specification of needs“", 5. Research/Expert Conference with International Participation, “Quality2007”, Univerzitet u Zenici,University Erlangen Nuremberg,Asocijacija za kvalitet u BiH, 06-09 June 2007, Neum, B&H

43. Alagić I.:"Analysis of current level of QMS introduction in the wood processing industry in FBiH and specification of future needs“, 5. Research/Expert Conference with International Participation, “Quality2007”, Univerzitet u Zenici, University Erlangen Nuremberg,Asocijacija za kvalitet u BiH, 06-09 June 2007, Neum, B&H

44. Ganne-Chédeville C., Alagić I., Gfeller B., Properzi M.: "Wood welding: A challenge alternative for wood processing industry in BiH", Studentska naučno-stručna konferencija u okviru sajma ZEPS Intermetal, Techno-Educa 2007, Zbornik radova, Univerzitet u Zenici, 17. maj 2007, Zenica, Bosna i Hercegovina.

45. Mujić A., Alagić I., Petković D.: "Menadžment ljudskih resursa (HRM) i potencijalne perspektive razvoja livničke proizvodnje u BiH za potrebe automobilske industrije", Studentska naučno-stručna konferencija u okviru sajma ZEPS Intermetal, Techno-Educa 2007, Zbornik radova, Univerzitet u Zenici, 17. maj 2007, Zenica, Bosna i Hercegovina.

46. Alagić I.: " Strengthening of research, development and training capacities (Technology Park & Wood Excellence Centre), in Central Bosnia and Herzegovina Region-THE IMPLEMENTATION IN BOSNIA AND HERZEGOVINA OF THE FIRST STAGES OF A REGIONAL POLICY PROCESS IN THE PRE-ACCESSION PHASE LEADING UP TO THE ENLARGEMENT PROCESS OF EU", 3rd European Regional Economic Forum (EREF-2007), Building Knowledge Society through Public RTD Funding, Round Table: Development priorities, preparations for IPA and public funding of RTD in Candidate and Potential Candidate Countries, Proceedings, 31.May-02.June 2007, Nova Gorica, Slovenia.

47. Alagić I.: " DOES B&H NEED WOOD EXCELLENCE CENTER?" 6. Međunarodna naučna konferencija o proizvodnom inžinjerstvu, RIM 2007, University of Bihać, Faculty of Technical Engineering in Bihać, Society for robotics of Bosnia and Herzegovina, International Biographical Centre Cambridge, England, 24-26. oktobar 2007, Plitvička jezera , Croatia.

48. Alagić I.:"Is there potential for waste wood commercial utilization in Central Bosnia and Herzegovina? ", 11th International Research/Expert Conference ”Trends in the Development of Machinery and Associated Technology”, University of Zenica, Faculty of Mechanical Engineering Engineering in Zenica, UPC Universitat Politecnica de Catalunya, Barcelona, Spain, BAHÇEŞEHIR ÜNIVERSITESI Istanbul ,Turkey, TMT 2007, 05-09. September 2007, Hammamet, Tunisia.

49. Alagić I., D. Petković, T. Stautmeister, K.Wüthrich: "Some word about Wood Excellence Center as top-priority project of Central BiH", 11th International Research/Expert Conference ”Trends in the Development of Machinery and Associated Technology”, University of Zenica, Faculty of Mechanical Engineering Engineering in Zenica, UPC Universitat Politecnica de Catalunya, Barcelona, Spain, BAHÇEŞEHIR ÜNIVERSITESI Istanbul ,Turkey, TMT 2007, 05-09. September 2007, Hammamet, Tunisia.

50. Alagić I.: Razvoj modela za samoocjenjivanje sistema kvaliteta u upravljanju lancem dobavljača automobilske industrije”, CIMOS Dan Raziskav 2007, 3. zbornik referatov, 16. november 2007., Koper, Slovenija.

51. Alagić I.:"How economy and regional development agencies could contribute to the reconciliation B&H-Expierence of REZ-RDA Central B&H", The 1st International Conference on Intercultural



Relations: The Challenges of Religious Pluralism, Faculty of Applied Social Studies, 6-7. December 2007., Nova Gorica, Slovenia.

52. Alagić I.: "EUROPEAN TECHNICAL REGULATION RELATED TO WOOD PROCESSING INDUSTRY", 7th SCIENTIFIC/RESEARCH SYMPOSIUM WITH INTERNATIONAL PARTICIPATION"METALIC AND NONMETALLIC MATERIALS-MNM 2008" ,15.-16. May 2008, Zenica, B&H

53. Alagić I.: "THE MANDATORY QUALITY REQUIREMENTS FOR OEM’s SUPPLIERS IN AUTOMOTIVE INDUSTRY", 7th

SCIENTIFIC/RESEARCH SYMPOSIUM WITH INTERNATIONAL PARTICIPATION"METALIC AND NONMETALLIC MATERIALS-MNM 2008",15.-16. May 2008, Zenica, B&H

54. Alagić I.: “WHY TEST INSTITUTES & CENTRES FOR WOOD PRODUCTS ARE IMPORTANT ISSUE FOR WOOD PROCESSING SECTOR IN B&H”, 12th International Research/Expert Conference ”Trends in the Development of Machinery and Associated Technology”, TMT 2008, 26-29. August 2008, Istanbul , Turkey

55. Plančić A., Alagić I.,,Petković D, Rizvić E.: “OPTIMIZATION OF CNC MACHINING OF WODDEN DRUMS IN STANEX Ltd. ZENICA”, Studentska konferencija ”TECHNO-EDUCA 2008”, 22. i 23. maj 2008. godine u Zenici,u sklopu međunarodnog sajma ZEPS-Intermetal 2008., Zenica, B&H

56. Garić E., Lihić A., Alagić I., Petković D., Yazgan H.: “APPLICATION OF ADVANCED CIM & JIT CONCEPT IN FURNITURE INDUSSTRY”, Studentska konferencija ”TECHNO-EDUCA 2008”, 22. i 23. maj 2008. godine u Zenici,u sklopu međunarodnog sajma ZEPS-Intermetal 2008. , Zenica, B&H

57. Alagić I, Petković D..: “THE EXISTING LEVEL OF PRODUCTION TECHNOLOGIES IN USE ON THE WOOD PROCESSING INDUSTRY IN FBiH BASED ON RESULTS OF CLUSTER COMPETITIVENESS ACTIVITY”, VI Naučno-stručna konferencija održavanja "KOD-2008", ”Inžinjerstvo u funkciji uspješnosti procesa održavanja” sa međunarodnim učešćem, KOD-2008, 10-13. Juni 2008, Hotel PALMA-Tivat, Crna Gora

58. Alagić I.: „DESIGN OF EXPERIMENT AND TAGUCHI METHOD APPLICATION IN ANALYSIS OF GEAR OIL PUMP FLOW CAPACITY“, International Conference 6th Workshop on European Scientific and Industrial Collaboration on promoting Advanced Technologies in Manufacturing WESIC’08, Bucharest, 25-26 September 2008, Romania.

59. Alagić I., Klarić S .:“DEVELOPMENT OF MODEL FOR ASSESSMENT OF QUALITY SYSTEM IN SUPPLY CHAIN MANAGEMENT OF AUTOMOTIVE INDUSTRY” , 6. Research/Expert Conference with International Participation “Quality 2009”, 04-07 June 2009, Neum, B&H

60. Alagić I., Klarić S.: “ISO/TS 16949:2002 AND ISO 9001:2000 – SIMILIRATIES AND DIFFERENCES”, 6. Research/Expert Conference with International Participation “Quality 2009”, 04-07 June 2009, Neum, B&H

61. Alagić I.: “THE EXISTING AND REQUIRED WORKFORCE AND TRAINING IN THE WOODPROCESSING INDUSTRY FBiH AS PRECONDITIONS FOR COMPETITIVENESS OF WOOD PROCESSING INDUSTRY IN B&H ”, 7th International ScientificConference on Production Engineering „RIM 2009“, September 26th- October 3rd 2009, Cairo , Egypt.

62. Alagić I.: „Evaluation of Market and Production Potential in the Wood Processing Sector in Bosnia and Herzegovina“, 13th International Research/Expert Conference ”Trends in the Development of Machinery and Associated Technology”, University of Zenica, Faculty of Mechanical Engineering Engineering in Zenica, UPC Universitat Politecnica de Catalunya, Barcelona, Spain, BAHÇEŞEHIR ÜNIVERSITESI Istanbul, Turkey, TMT 2009, 16-21. October 2009, Hammamet, Tunisia.

63. Alagić I.:” “THE GAP ANALYSIS OF THE WOOD PROCESSING SECTOR IN BOSNIA AND HERZEGOVINA”, VIII Naučno/stručni



simpozij sa međunarodnim učešćem ”METALNI I NEMETALNI MATERIJALI”, Zenica, BiH, 27-28.april 2010

64. Alagić I.:” “MARKET SURVEY AND IDENTIFICATION OF HIGH IMPACT ICTs IN BH WOOD PROCESSING INDUSTRY” ,14th

International Research/Expert Conference "Trends in the Development of Machinery and Associated Technology"TMT 2010, 11-18 September 2010, Mediterranean Cruise

65. Alagić I.:” WOOD TECHNOLOGY CENTRE AS PRE-CONDITION FOR EXCELLENCE AND INNOVATION OF THE WOOD PROCESSING SECTOR IN B&H” ICEIRD2010: International Conference for Entrepreneurship, Innovation and Regional Development, 27-29. May 2010., Novi Sad, Serbia.

66. Alagić I.:” TEŠANJ BUSINESS EXCELLENCE INFRASTRUCTURE (TEBEXII) STRATEGY AS ENABLING INVESTMENT ENVIRONMENT”, ICEIRD2010: International Conference for Entrepreneurship, Innovation and Regional Development, 27-29. May 2010., Novi Sad, Serbia.

67. Alagić I, Šišić F: “TEŠANJ BUSINESS EXCELLENCE (TEBEX) STRATEGY AS ENABLING INVESTMENT ENVIRONMENT”, Proceedings of Business Development Conference 2010, 12th. November 2010, Zenica, Bosnia and Herzegovina.

68. Alagić I, Petković D.: ARTECO WOOD TECHNOLOGY CENTRE AS PRE-CONDITION FOR EXCELLENCE AND INNOVATION OF THE WOOD PROCESSING SECTOR IN B&H, Business Development Conference 2010, Proceedings of Business Development Conference 2010, 12th. November 2010, Zenica, Bosnia and Herzegovina.

69. Alagić I.: Savremeni pristup sistemu kvaliteta u upravljanju lancem dobavljača u automobilskoj industriji, ”, 7th Research/Expert Conference with International Participation “Quality 2009”, 01st-04th June 2011, Neum, B&H

70. Alagić I.: How to achieve Excellence and Innovation and Quality in the Wood processing industry in BiH, 7th Research/Expert Conference with International Participation “Quality 2011”, 01th-04th June 2011, Neum, B&H

71. Alagić I.: TEST AND RESEARCH CENTRES FOR WOOD PRODUCTS AS A CHALLENGE FOR B&H WOOD PROCESSING SECTOR, 15th International Research/Expert Conference”Trends in the Development of Machinery and Associated Technology” TMT 2011,12-18 September 2011., Prague, Czech Republic

72. Alagić I.: MANDATORY REQUIREMENTS FOR WOOD PROCESSING IN THE FIELDS OF CERTIFICATION, LABELLING, MARKING AND STANDARDISATION, 15th International Research/Expert Conference”Trends in the Development of Machinery and Associated Technology” TMT 2011, 12-18 September 2011., Prague, Czech Republic

73. Alagić I.: THE GAP ANALYSIS AS A TOOL TO IMPROVE THE COMPETITIVENESS OF WOOD PROCESSING SECTOR IN BOSNIA AND HERZEGOVINA, 15th International Research/Expert Conference”Trends in the Development of Machinery and Associated Technology” TMT 2011, 12-18 September 2011., Prague, Czech Republic

74. Alagić I., Šišić F.: Models of excellence in local economic development of Tešanj municipality, Konferencija Razvoj poslovanja 2011, Ekonomska politika i poslovanje malih i srednjih preduzeća, Ekonomski fakultet, Univerzitet u Zenici, 12. Novembar 2011. Godine, Zenica, BiH.

75. Alagić I.:” CERTIFICATION MANUAL OF WOOD AND WOODEN PRODUCTS “, ,9thSCIENTIFIC/RESEARCH SYMPOSIUM WITH INTERNATIONAL PARTICIPATION, "METALLIC AND NONMETALLIC MATERIALS: production -properties-application", MNM 2012, 23rd and 24th APRIL 2012, ZENICA, B&H.

76. Alagić I.:” URBAN WASTEWATER PROJECT IN MUNICIPALITY OF TEŠANJ ” , 2nd International Symposium on Environmental and Material Flow Management, EMFM 2012, 07-09. June 2012., Zenica , B&H.



77. Alagić I.:” OPŠTE ODREDNICE LANCA DOBAVLJAČA - MODEL SISTEMA UPRAVLJANJA KVALITETOM U UPRAVLJANJU LANCEM DOBAVLJAČA AUTOMOBILSKE INDUSTRIJE”, The 2nd Conference „ODRŽAVANJE 2012“/ „MAINTENANCE June 13-16. 2012., Zenica, B&H

78. Alagić I., Kozak D., Šimunović K.:“ ANALYSIS OF GEAR OIL PUMP FLOW CAPACITY USING DESIGN OF EXPERIMENT”, SHMD 2012 Materials and Metallurgy, 17.-21.06.2012, Sibenik, Republic of Croatia.

79. Alagić I:” MAIN FINDINGS, OBSTACLES AND CHALLENGES FOR IMPROVEMENTS OF THE WATER/WASTEWATER SECTOR IN MUNICIPALITY OF TEŠANJ”, 16th International Research/Expert Conference ”Trends in the Development of Machinery and Associated Technology” TMT 2012, 10-12. September 2012, Duabai , UAE.

80. Alagić I:” “ENERGY EFFICIENCY IN ADRIATIC REGION-CASE STUDY OF TEŠANJ MUNICIPALITY”,2nd International Scientific Conference on Engineering, mat 2012, Antalya,Turkey , November 22-24 2012.

81. Alagić I.:“OPTIMIZATION OF FORCE CLAMPING THE BRAKE DISK DURING MACHINING USING THE FINITE ELEMENT METHOD (FEM) SIMULATIONS”, MECAHITECH'12 - „The 4th International Conference on Innovations, Recent Trendsand Challenges in Mechatronics, Mechanical Engineeringand New High-Tech Products Development”, Bucharest, October 2012, Romania.

82. Piljug E., Alagić I.: “Disassembly and Assembly Technology of Tie Rod”, VI Studentska konferencija ”TECHNO-EDUCA 2012”, Tema: Preduzetničkim idejama ka ljepšoj budućnosti, 07 i 08. Novembar 2012. godine ,Univerzitet u Zenici, Centar za preduzetništvo I inovacije CIP EIC, BSC Zeničko-dobojskog kantona, Zenica, B&H.

83. Hajdić N.,Alagić I., Petković D.: “Primjena GT koncepta u proizvodnji automobilskih dijelova / Application of GT concept in car’s parts production”, VI Studentska konferencija ”TECHNO-EDUCA 2012”, Tema: Preduzetničkim idejama ka ljepšoj budućnosti, 07 i 08. Novembar 2012. godine ,Univerzitet u Zenici, Centar za preduzetništvo I inovacije CIP EIC, BSC Zeničko-dobojskog kantona, Zenica, B&H.

84. I.Alagić, S.Huskić, F.Šišić: „THE BEST PRACTICES OF BUSINESS EXCELLENCE ON TEŠANJ'S MUNICIPALITY CASE“, 8th Research/Expert Conference with International Participations ”QUALITY 2013“, Neum, B&H, June 06 – 08, 2013.

85. I.Alagić: “ASSESSMENT OF LOCAL ECONOMIC DEVELOPMENT CAPACITIES ACCORDING TO BUSINESS-FRIENDLY SCHEME IN CASE OF TEŠANJ’S MUNICIPALITY, 17th International Research/Expert Conference ”Trends in the Development of Machinery and Associated Technology” TMT 2013, Istanbul, Turkey, 10-11 September 2013.

Tešanj, November 2013.

EUROPEAN CURRICULUM VITAE FORMATptf.unze.ba/wp/wp-content/uploads/2018/05/CV-Alagic.pdfPage 1 -...

Documents

Transcript of EUROPEAN CURRICULUM VITAE FORMATptf.unze.ba/wp/wp-content/uploads/2018/05/CV-Alagic.pdfPage 1 -...