ENGR. ZEESHAN KHALID

PERSONAL PROFILE:

EDUCATION HISTORY:

Bachelor of Science in Electrical Engineering (2010) Govt College University Lahore (Pakistan)

FSc (Pre.-Engineering) (2006) Faisalabad Board (Pakistan) Metric (Science) (2004) Faisalabad Board (Pakistan) Auto Cad (2d, 3d) Govt College University Lahore(Pakistan) Certificate of Registration (2011) Pakistan Engineering Council(Pakistan)

CAREER SUMMARY:

An experienced Electrical Project Engineer who is creative, resourceful & flexible with strong meeting, planning and facilitation skills. Able to coordinate tasks to accomplish projects within timelines. I excel at Systems evaluation, Operations analysis, Equipment and line installation. Having more than 6 years of experience in EPC of GIS Substation ,High Voltage U/G and Overhead Transmission lines, power generation (steam/gas/combined cycle turbines) Power Transmission and distribution.

Contact: Cell & Whatsapp:00966-504467594 Home Cell: 0092-3236054754

Email: zeshecheema2009@hotmail.com Skype Name:zeshecheema

Address: Current: Jubail Industiral City-Saudia Arabia. Permanent: Faisalabad Pakistan

Date of birth: 14-Feb-1989

Marital status: Single

EXPERIENCE: KSA:4Years, Pakistan:3Years:

Working as Project Electrical Engineer with Hadi Haider Al-Yami Company. Projects Name: EPC of Jubail Commercial Port 115/13.8KV Substation -2 (Jubail).Contract#: 071-C20R.

Worked as Project Engineer on EPC of 20BD 115/13.8KV substation Marduma(Jubail).Contract#:564-C31 Client: Royal Commission of KSA. Consultant: Saudi Electricity Company. Responsibilities:

Preparing scoped electrical drawings, subcontract packages, energize and synchronization procedures, work packages, populating quantity database, reviewing engineering design, procurement documentation, spare parts, and vendor submittals.

Construction & scheduling of Duct Banks (Electrical Manholes, Hand holes), Shielding Mast/Lightening pool, Substation/Grid grounding.

Estimation , scheduling & Installation of LV/MV Cables ,Cable Tray, Lightening Fixtures, Power transformer/Auxiliary transformer,115KV GIS,13.8KV Switchgear, Capacitor Bank(VAR calculation & Installation),DC batteries, Communication, Control & Protection panels.

Testing and commissioning of control and relay panel of transformer, bus coupler, bus transfer and line feeder. Power Transformer and SST Transformer installation, inspection, testing, maintenance and troubleshooting. Testing and commissioning of CT,PT,CVT, circuit breaker. switch gear and power transformer. (Instrument: CPC 100,1000 Omicron).Harmonic analysis for power factor improvement at 7 substations. (Instrument: Fluke 435 power quality analyzer).Testing of auxiliary relays lockout relays. (Instrument: sverker)

Worked as Transmission Line Electrical Engineer with Hadi Haider Al-Yami Company. Projects: 110KV Underground transmission line and Overhead Transmission Lines Contract#4400001052.Client & Consultant: Saudi Electricity Company (Taif-Saudia Arabia).

Responsibilities: Worked on Tower Erection, Stinging, and Sagging. Worked on pulling & backfilling of U/G Transmission Lines of

1200mm.sq/2500mm.sq XLPE cables.(Total=168KM) Worked as Site Manager on 110KV Jointing & Termination of

1200sq.mm,2500sq.mm cables.(Quantity: Joints= 312 MSA-123XKG, Indoor Termination=42 ESU, Outdoor Termination=30 ESP).

Worked as testing and commissioning Supervisor for Transmission line projects• Partial Discharge measurements• DC Test on the sheath.

• Measurement of the electrical resistance of conductor and screen.• Measurement of the capacitance.• Measurement of the line impedance.• Verification of phase sequence & Withstand Resonant test.

Worked as Electrical Design Engineer with Hadi Haider Al-Yami Company. Projects: 110KV Underground transmission line and Overhead Transmission Lines Contract#4400001052.Client & Consultant: Saudi Electricity Company (Taif-Saudia Arabia).

Responsibilities: Accurately followed specifications outlined in proposed projects to ensure that the

overall production goal is achieved in the end Be present for consultation with clients for an in-depth discussion of what the job

at hand involves Created new designs and forward them to the project manager or manufacturer for

evaluation. In doing this, remained stick to the acceptable standards of engineering designs

Considered the safety of clients, manufacturers and workers by taking safety precautions and avoiding ideas that could endanger lives

Ensured that all designs are not complicated but easy to understand by clients, manufacturers and installers for easy interpretation even in their absence

Monitored the step by step progress of the project and make a detailed report of observation which will be submitted to the project supervisor to determine if the project conforms to the initial design provided

Evaluated designs to spot loopholes, and fine-tune them to enhance their final outlook.

Worked as Site Incharge on fibre optics cable splicing and testing by OTDR.

Worked three years as an Assistant Manager/Electrical Engineer in Faisalabad Electricity Supply Company (Faisalabad-Pakistan).Responsibilities:

Worked on Grid maintenance, Transformer testing (Capacitance dissipation & power factor test), troubleshooting, maintenance, breakers and relay testing etc.

Maintenance and Operations of Electricity Supply infrastructure such as HT Lines, Earthing Arrestors, Gang Operated (GO) Switch, HT Transformers, LT Panels, Capacitor Bank, VCBs and ACBs. 

Maintenance and Operations of Electricity Backup infrastructure such as DG Sets, Cooling Towers, Invertors & UPS installations.

Maintenance and Servicing of Electricity Supply Systems such as Bus Bars, Distribution Panels & Cable, MCBs and ELCBs etc.

Maintenance and Operations of Street and other common area Lights and fixtures. 

Energy Metering, Audits and measures to reduce Technical and other electrical losses. 

Maintenance and Servicing of Earthing and Grounding systems.  Load and Power Factor Management. Vendor and Purchase Management.  Supervising and Management Reports: Shift and Staff Reports, Load and

Consumption Reports. Management Reports: DMRs, MMRs, YMRs, Breakdown and Incident Reports, Service Reports, Planning and Executing, Planned Preventive Maintenance (PPM) Schedules, Service Maintenance Schedules.

Training & Internship:

Training for six months as Internee Engineer with Grid maintenance (protection and instrumentation) department at 500KV Grid Station National Transmission & Despatch Co.LTD (Faisalabad-Pakistan).

Training for three months as Internee Engineer in Gas Turbine Power Station with Northern Power Generation Co.LTD (Faisalabad-Pakistan).

Certification in AutoCAD (six months experience…) at Govt College University Lahore (Pakistan).

MAJOR SUBJECTS:

Electrical Machine Power electronics Basic Electrical Engineering Signal and system Control Systems Digital signal processing High voltage measurement Analog Filter design Digital logic design Computer communication and networking Digital communication Linear circuit analysis AutoCAD (2d, 3d) Microwave Engineering Fibre optics theory and techniques

FINAL YEAR PROJECTS:

Implementation of 32-bits MIPS architecture based microprocessor on FPGA starter kit.

Dot matrix keypad operating by microprocessor and microcontroller. Control the rotation of a mini motor by microprocessor and microcontroller.

SKILLS:

Computer: Working knowledge of programming languages C, C++, Assembly, Verilog (HDL) and Visual basics. Access, Excel, Word and PowerPoint.

Engineering software: Electronics Workbench, AutoCAD (2d, 3d), Xilinx,

Multisim, Matlab… Presentation: Developed ability to produce reports and presentations to a

professional standard. Analysis & Evaluation: Proficient in assessing data and formulating solutions. Organisational: Effective at time management & achieving tasks deadlines. Interpersonal/Communication: Strong team working, leadership and

communication skills. Languages: English,Arabic,Punjabi, Sindhi, Urdu, Hindi. Driving License: Pakistani , Saudi Arabian(applied for).

REFERENCE:

Available on demand.