Adjustment work for

Cool/it hinged doors 1/2

Height adjustment

Step 1

De-install door leaf

Step 2

Turn riser inside frame part of door hinge.

Right handed doors: Turn clockwise � lowers door

Left handed doors: Turn clockwise � raises door

Step 3

Reinstall door leaf

Adjust sealing properties of doors

Step 1

De-install door leaf

Step 2

Adjust frame part of door hinges with support of washers (Spare-part nr. 20-020 / 20-021)

Step 3

Reinstall door leaf

Door gets stuck on floor

Step 1

De-install door leaf

Step 2

Adjust frame part of door hinges with support of washers (Spare-part nr. 20-020 / 20-021)

Step 3

Reinstall door leaf

Adjustment work for

Cool/it hinged doors 2/2

Maintenance:

Should only be carried out by Cool it Customer Service or specially trained and authorized

personnel. To this end, Cool/it offers service contracts. Servicing normally takes place once a

year with the legally laid down UVV-examination (Accident Prevention Regulations

(Germany)). Where the door is installed in difficult situation or locations or receives high-

frequency use (approx. 25,000 cycles), quarterly servicing is recommended.

---------------------------------------------------------------------------------------------------------------------------

For your safety, we absolutely and on principle recommend a Service Contract.

Tel.: +49 (0) 5422 / 609 - 0

Fax: +49 (0) 5422 / 609 - 299

E-Mail: info@coolit.de