Drucksensoren Datenblätter - Pewatron 100-32-102-015-EH-0110.pdf Sensing element H Gauge FGN...

100-31-102-005-DH-0713.pdf

Drucksensoren Datenblätter

FPN

FGN

FPM

FGM

FDM

FHM

FAM

XFPN

XFGN

XFPM / AP2

XFGM / AG2

XFDM

XFHM

XFAM

N = 5 - 10% FSM = 2.5 - 5% FSAx2 = 1.5% FSAx4 = 1.5% FS

Verstärkte Serien

Unverstärkte Serien

DigitaleSerien

AP4

AG4

Gehäuseformen

100-31-102-005-DH-0713

100-31-102-005-DH-0713.pdf

100-32-102-012-EH-0110.pdf

Sensing element／Gauge FPN Data sheet

1

■Features ■Applications Dual-in-line package (DIP) ・Home use Non-Invasive Blood Pressure (NIBP) monitors ・Vacuum cleaner ・Washing machine ■Part number for ordering

Weight (grams)

1.1

Measurable pressure

range(kPa) Part number for ordering

-13.79～13.79 FPN-02PG FPN-02PGR -34.47～34.47 FPN-05PG FPN-05PGR -48.26～48.26 FPN-07PG FPN-07PGR

■Specifications Model 02PG 05PG 07PG Unit

Recommended operating conditions Pressure type Gauge pressure －

Rated pressure 13.79 34.47 48.26 kPa Measurable pressure range -13.79～13.79 -34.47～34.47 -48.26～48.26 kPa

Temperature range 0～50 ℃ Pressure media Non-corrosive gases only (No liquid) －

Excitation current (Constant) 1.5 mADC Absolute maximum rating

Maximum load pressure Twice of rated pressure － Maximum excitation current 3.0 mADC

Operating temperature 0～80 ℃ Storage temperature -20～100 ℃ Operating humidity 30～80 (Non dew condition) %RH

Electric characteristics (Drive Current 1.5mA constant ,ambient temperature Ta=25℃) Output span voltage 40～130 (at 0kPa～rated pressure） mV

Offset voltage ±25 (at 0kPa) mV Bridge resistance 4000～6000 Ω Response time 2 (for the reference） msec

Accuracy TSO* ±10 ±8 %FS/0～50℃

TCS* 5.0 2.5 %FS/0～50℃

Linearity ±0.6 ±0.3 %FS Pressure hysteresis ±1.0 ±0.7 %FS

Model

Rated Pressure (PSI)

Pressure type G：Gauge Pressure

Terminal leadsdirection

No Mark：

R ：

ＦＰＮ－０７ＰＧＲ

*TSO：Temperature sensitivity of offset voltage *TCS：Temperature coefficient of output span voltage *Temperature range from 0-50 deg C

RoHS compliance

100-31-102-005-DH-0713

100-31-102-005-DH-0713.pdf

100-32-102-012-EH-0110.pdf


2

■Outline dimensions■

100-31-102-005-DH-0713

100-31-102-005-DH-0713.pdf

100-32-102-012-EH-0110.pdf


3

■Connection diagram■

■Output characteristics■

Note ; Please read instruction “Notes” before using the sensor. Fujikura reserves the right to change specifications without notice. If you have any questions regarding technical issues or specifications, please contact us. Sensor Engineering Department 5-1 Kiba 1-chome, Koto-ku, Tokyo 135-8512, Japan Phone +81-(0)3-5606-1072 E-mail : [email protected]

Output span voltage

Rated pressure

↑Output voltage（mV）

→Pressure（kPa）

0kPa

Offset voltage

-Rated pressure

Atomospheric pressure

100-31-102-005-DH-0713

100-31-102-005-DH-0713.pdf

100-32-102-015-EH-0110.pdf

Sensing element／Gauge FGN Data sheet

1

■Features ■Applications Surface mount package ・Home use Non-Invasive Blood Pressure (NIBP) monitors ・Vacuum cleaner ・Washing machine ■Part number for ordering

Weight (grams)

0.35

Measurable pressure


-13.79～13.79 FGN-602PGSR -34.47～34.47 FGN-605PGSR -48.26～48.26 FGN-607PGSR

■Specifications Model 602PG 605PG 607PG Unit


Rated pressure 13.79 34.47 48.26 kPa Measurable pressure range -13.79～13.79 -34.47～34.47 -48.26～48.26 kPa




Operating temperature 0～80 ℃ Storage temperature -20～100 ℃ Operating humidity 30～80 (Non dew condition) %RH

Electric characteristics (Drive Current 1.5mA constant ,ambient temperature Ta=25℃) Output span voltage 40～130 (at 0kPa～rated pressure） mV

Offset voltage ±25 (at 0kPa) mV Bridge resistance 4000～6000 Ω Response time 2 (for the reference） msec

Accuracy TSO* ±10 ±8 %FS/0～50℃

TCS* 5.0 2.5 %FS/0～50℃

Linearity ±0.6 ±0.3 %FS Pressure hysteresis ±1.0 ±0.7 %FS

Model

Length of the pressure port Rated Pressure (PSI) G：Gauge Pressure

Terminal leads configuration Surface mount package

ＦＧＮ－６０７ＰＧＳＲ

6：6mm Pressure type

RoHS compliance


100-31-102-005-DH-0713

100-31-102-005-DH-0713.pdf

100-32-102-015-EH-0110.pdf


2



2-φ1.1

FGN

100-31-102-005-DH-0713

100-31-102-005-DH-0713.pdf

100-32-102-015-EH-0110.pdf


3



Output span voltage

Rated pressure



0kPa

Offset voltage

-Rated pressure


100-31-102-005-DH-0713

100-31-102-005-DH-0713.pdf

100-32-102-017-EH-0110.pdf

Sensing element／Gauge FPM Data sheet

1

■Features ■Applications Dual-in-line package (DIP) ・Industrial instrumentation

・Pressure switch, Pneumatic device ・Medical device

■Part number for ordering

Weight (grams)

1.1

Measurable pressure


-13.79～13.79 FPM-02PG FPM-02PGR -34.47～34.47 FPM-05PG FPM-05PGR -48.26～48.26 FPM-07PG FPM-07PGR -98.07～103.4 FPM-15PG FPM-15PGR -98.07～206.8 FPM-30PG FPM-30PGR -98.07～344.7 FPM-50PG FPM-50PGR -98.07～482.6 FPM-70PG FPM-70PGR -98.07～827.4 FPM-120PG FPM-120PGR

■Specifications Model 02PG 05PG 07PG 15PG 30PG 50PG 70PG 120PG Unit


Rated pressure 13.79 34.47 48.26 103.4 206.8 344.7 482.6 827.4 kPa

Measurable pressure range -13.79 ～13.79

-34.47 ～34.47

-48.26 ～48.26

-98.07 ～103.4

-98.07～206.8

-98.07～344.7

-98.07～482.6

-98.07～827.4 kPa



Maximum load pressure

Twice of rated pressure

1.5 times of rating pressure

－

Maximum excitation current 3.0 mADC Operating temperature -20～100 ℃ Storage temperature -40～120 ℃ Operating humidity 30～80 (Non dew condition) %RH

Electric characteristics （Drive Current 1.5mA constant, ambient temperature Ta=25℃） Output span voltage 60～140 (at 0kPa～rated pressure) mV

Offset voltage ±20 (at 0kPa) mV Bridge resistance 4000～6000 Ω Response time 2 (for the reference) msec

Accuracy TSO* ±5 TCS* 2.5

%FS/ 0～50℃

Linearity ±0.5 ±0.3 ±0.5 ±0.6 %FS Pressure hysteresis ±0.4 ±0.2 ±0.4 %FS

Model




No Mark：

R ：

ＦＰＭ－０７ＰＧＲ


RoHS compliance

100-31-102-005-DH-0713

100-31-102-005-DH-0713.pdf

100-32-102-017-EH-0110.pdf


2


100-31-102-005-DH-0713

100-31-102-005-DH-0713.pdf

100-32-102-017-EH-0110.pdf


3




Output span voltage

Rated pressure



0kPa

Offset voltage

-Rated pressure

＜02PG～07PG＞


Output span voltage

Rated pressure



0kPa

Offset voltage

-98.07kPa

＜15PG～120PG＞


100-31-102-005-DH-0713

100-31-102-005-DH-0713.pdf

100-32-102-010-EH-0110.pdf

Sensing element／Absolute FPM-A Data sheet

1

■Features ■Applications Barometric pressure measurable ・Industrial instrumentation Dual-in-line package (DIP) ・Medical device

・Barometer, Altimeter ・Altitude compensation


Weight (grams)

1.5

Measurable pressure

range(kPa･abs) Part number for ordering

34.66～168.0 FPM-15PA FPM-15PAR

■Specifications Model FPM-15PA ／ FPM-15PAR Unit

Recommended operating conditions Pressure type Absolute pressure －

Rated pressure 168.0 kPa･abs Measurable pressure range 34.66～168.0 kPa･abs




Operating temperature -20～100 ℃ Storage temperature -40～120 ℃ Operating humidity 30～80 (Non dew condition) %RH

Electric characteristics (Drive Current 1.5mA constant ,ambient temperature Ta=25℃) Output span voltage 80～160 (at 34.66～168.0kPa･abs) mV

Offset voltage 50～130 (at 101.3 kPa･abs) mV Bridge resistance 4000～6000 Ω Response time 2 (for the reference） msec

Accuracy TSO* ±3 %FS/0～50℃

TCS* 2.5 %FS/0～50℃

Linearity ±0.3 %FS Pressure hysteresis ±0.2 %FS

Model


Pressure type A：Absolute pressure


No Mark：

R ：

ＦＰＭ－１５ＰＡＲ


RoHS compliance

100-31-102-005-DH-0713

100-31-102-005-DH-0713.pdf

100-32-102-010-EH-0110.pdf


2


100-31-102-005-DH-0713

100-31-102-005-DH-0713.pdf

100-32-102-010-EH-0110.pdf


3




Output span voltage

168.0


→Pressure(kPa･abs) 34.66

Offset voltage

101.3


100-31-102-005-DH-0713

100-31-102-005-DH-0713.pdf

100-32-102-009-EH-0110.pdf

Sensing element／Gauge FGM Data sheet

1

■Features ■Applications Surface mount package ・Industrial instrumentation



Weight(grams)

Weight (grams)

0.3

0.35

Part number for ordering Measurable pressure

range(kPa) 3mm pressure port 6mm pressure port -13.79～13.79 FGM-302PGSR FGM-602PGSR -34.47～34.47 FGM-305PGSR FGM-605PGSR -48.26～48.26 FGM-307PGSR FGM-607PGSR -98.07～103.4 FGM-315PGSR FGM-615PGSR -98.07～206.8 FGM-330PGSR FGM-630PGSR -98.07～344.7 FGM-350PGSR FGM-650PGSR -98.07～482.6 FGM-370PGSR FGM-670PGSR -98.07～827.4 FGM-3120PGSR FGM-6120PGSR





-34.47 ～34.47

-48.26 ～48.26

-98.07 ～103.4

-98.07～206.8

-98.07～344.7

-98.07～482.6

-98.07～827.4 kPa






－





%FS/ 0～50℃


Model

Length of the pressure port Rated Pressure (PSI) G：Gauge Pressure


ＦＧＭ－６０７ＰＧＳＲ


6：6mm

RoHS compliance


100-31-102-005-DH-0713

100-31-102-005-DH-0713.pdf

100-32-102-009-EH-0110.pdf


2


2-φ1.1

100-31-102-005-DH-0713

100-31-102-005-DH-0713.pdf

100-32-102-009-EH-0110.pdf


3




＜602PG～607PG＞

＜302PG～307PG＞

Output span voltage

Rated pressure



0kPa

Offset voltage

-Rated pressure


＜315PG～3120PG＞＜615PG～6120PG＞

Output span voltage

Rated pressure



0kPa

Offset voltage

-98.07kPa


100-31-102-005-DH-0713

100-31-102-005-DH-0713.pdf

100-32-102-007-EH-0110.pdf

Sensing element／Differential FDM Data sheet

1

■Features ■Applications Differential pressure，Surface mount package ・Industrial instrumentation



Weight (grams)

1.2

Measurable pressure


-13.79～13.79 FDM-02PDSR -34.47～34.47 FDM-05PDSR -48.26～48.26 FDM-07PDSR -103.4～103.4 FDM-15PDSR -206.8～206.8 FDM-30PDSR -344.7～344.7 FDM-50PDSR -482.6～482.6 FDM-70PDSR -827.4～827.4 FDM-120PDSR

■Specifications Model 02PD 05PD 07PD 15PD 30PD 50PD 70PD 120PD Unit

Recommended operating conditions Pressure type Differential pressure －



-34.47 ～34.47

-48.26 ～48.26

-103.4 ～103.4

-206.8～206.8

-344.7～344.7

-482.6～482.6

-827.4～827.4 kPa



Maximum differential pressure **1 Port1 Maximum load pressure Port2 Maximum load pressure



－


Electric characteristics （Drive Current 1.5mA constant, ambient temperature Ta=25℃） Output span voltage **2 60～140 (at 0kPa～rated pressure) mV



%FS/ 0～50℃



Model


Pressure type D：Differential pressure

ＦＤＭ－０７ＰＤＳＲ

*TSO：Temperature sensitivity of offset voltage *TCS：Temperature coefficient of output span voltage *Temperature range from 0-50 deg C **1 Port1 pressure >Port2 pressure , Port2 pressure：reference pressure **2 Output refers to pressure at pressure port2.

RoHS compliance

100-31-102-005-DH-0713

100-31-102-005-DH-0713.pdf

100-32-102-007-EH-0110.pdf


2



100-31-102-005-DH-0713

100-31-102-005-DH-0713.pdf

100-32-102-007-EH-0110.pdf


3



Output span voltage

Rated pressure



0kPa

Offset voltage

-Rated pressure


Pressure(kPa) =Port1 pressure - Port2 pressure (Port1 pressure >Port2 pressure) Output refers to pressure at pressure port2.

100-31-102-005-DH-0713

100-31-102-005-DH-0713.pdf

100-32-102-016-EH-0110.pdf

Sensing element／Gauge FHM Data sheet

1

■Features ■Applications Horizonral pressure port ・Industrial instrumentation



Weight(grams)

０．６

Measurable pressure


-13.79～13.79 FHM-02PG FHM-02PGR -34.47～34.47 FHM-05PG FHM-05PGR -48.26～48.26 FHM-07PG FHM-07PGR -98.07～103.4 FHM-15PG FHM-15PGR -98.07～206.8 FHM-30PG FHM-30PGR -98.07～344.7 FHM-50PG FHM-50PGR -98.07～482.6 FHM-70PG FHM-70PGR -98.07～827.4 FHM-120PG FHM-120PGR





-34.47 ～34.47

-48.26 ～48.26

-98.07 ～103.4

-98.07～206.8

-98.07～344.7

-98.07～482.6

-98.07～827.4 kPa






－





%FS/ 0～50℃


Model




No Mark：

R ：

ＦＨＭ－０７ＰＧＲ


RoHS compliance

100-31-102-005-DH-0713

100-31-102-005-DH-0713.pdf

100-32-102-016-EH-0110.pdf


2


100-31-102-005-DH-0713

100-31-102-005-DH-0713.pdf

100-32-102-016-EH-0110.pdf


3




Output span voltage

Rated pressure



0kPa

Offset voltage

-Rated pressure

＜02PG～07PG＞


Output span voltage

Rated pressure



0kPa

Offset voltage

-98.07kPa

＜15PG～120PG＞


100-31-102-005-DH-0713

100-31-102-005-DH-0713.pdf

100-32-102-011-EH-0110.pdf

Sensing element／Absolute FAM Data sheet

1

■Features ■Applications Barometric pressure measurable ・Industrial instrumentation Surface mount package ・Medical device

・Barometer, Altimeter ・Altitude compensation


Weight (grams)

0.3

Measurable pressure range(kPa･abs) Part number for ordering

34.66～168.0 FＡM-15PASR

■Specifications Model FAM-15PASR Unit


Rated pressure 168.0 kPa･abs Measurable pressure range 34.66～168.0 kPa･abs





Electric characteristics (Drive Current 1.5mA constant ,ambient temperature Ta=25℃) Output span voltage 80～160 (at 34.66～168.0kPa･abs) mV

Offset voltage 50～130 (at 101.3 kPa･abs) mV Bridge resistance 4000～6000 Ω Response time 2 (for the reference） msec

Accuracy TSO* ±3 %FS/0～50℃

TCS* 2.5 %FS/0～50℃

Linearity ±0.3 %FS Pressure hysteresis ±0.2 %FS


Model



ＦＡＭ－１５ＰＡＳＲ

RoHS compliance


100-31-102-005-DH-0713

100-31-102-005-DH-0713.pdf

100-32-102-011-EH-0110.pdf


2



100-31-102-005-DH-0713

100-31-102-005-DH-0713.pdf

100-32-102-011-EH-0110.pdf


3



Output span voltage

168.0


→Pressure(kPa･abs) 34.66

Offset voltage

101.3


100-31-102-005-DH-0713

100-31-102-005-DH-0713.pdf

100-31-102-001-EH-0110.pdf

Pre-amplified／5V Excitation／Gauge XFPN Data sheet

1

■Features ■Applications On-chip amplification and temperature compensations ・Home use Non-Invasive Blood Pressure (NIBP) monitors Pre-calibration of offset voltage and span ・Vacuum cleaner Dual-in-line package (DIP) ・Washing machine ■Part number for ordering

Weight (grams)

1.2

Measurable pressure


0～-24.5 XFPN-03PGV XFPN-03PGVR 0～-100 XFPN-100KPGV XFPN-100KPGVR 0～25 XFPN-025KPG XFPN-025KPGR 0～50 XFPN-050KPG XFPN-050KPGR 0～100 XFPN-100KPG XFPN-100KPGR 0～200 XFPN-200KPG XFPN-200KPGR

■Specifications Model 03PGV 100KPGV 025KPG 050KPG 100KPG 200KPG Unit


Rated pressure -24.5 -100 25 50 100 200 kPa Measurable pressure range 0～-24.5 0～-100 0～25 0～50 0～100 0～200 kPa


Supply voltage（constant） 5±0.25 VDC Absolute maximum rating

Maximum load pressure Twice of rated pressure － Maximum excitation voltage 8 VDC

Operating temperature -10～80 ℃ Storage temperature -20～100 ℃ Operating humidity 30～80 (Non dew condition) ％RH

Electrical characteristics (Excitation voltage Vcc=5.0V constant ,ambient temperature Ta=25℃) Power consumption 10mA max. mA Output impedance 10Ω max. Ω

Source current 0.2mA max. mA Sink current 2mA max. mA

Response time 2 (for the reference) msec Output span voltage 4.0 V

Offset voltage * 0.5±0.1 (at 0 kPa ) V Output voltage at full scale * 4.5±0.1 (at rated pressure) V

Accuracy * ±5.0 %FS/0～50℃

RoHS compliance

* Excluding input voltage error.

GV：Gauge Pressure(Negative pressure) G：Gauge(Positive pressure)

Pressure type Rated Pressure (kPa)


No Mark：

R ：

ＸＦＰＮ－０２５ＫＰＧＲ

Model

100-31-102-005-DH-0713

100-31-102-005-DH-0713.pdf

100-31-102-001-EH-0110.pdf


2


100-31-102-005-DH-0713

100-31-102-005-DH-0713.pdf

100-31-102-001-EH-0110.pdf


3


■Transfer Function■

Vout = Vs×( P×α+β) ± (Pressure Error×Temperature Error Multiplier×α×Vs)

Vs=Vcc=5.0V

P=Input pressure(kPa)

Model Measurable

pressure range(kPa)

α β Pressure Error(kPa）

XFPN-03PGV XFPN-03PGVR 0～-24.5 -0.03266 0.1 0.612 XFPN-100KPGV XFPN-100KPGVR 0～-100 -0.008 0.1 2.5 XFPN-025KPG XFPN-025KPGR 0～25 0.032 0.1 0.625 XFPN-050KPG XFPN-050KPGR 0～50 0.016 0.1 1.25 XFPN-100KPG XFPN-100KPGR 0～100 0.008 0.1 2.5 XFPN-200KPG XFPN-200KPGR 0～200 0.004 0.1 5

T emperature Error Multiplier

View from Lavel

Marking

100-31-102-005-DH-0713

100-31-102-005-DH-0713.pdf

100-31-102-001-EH-0110.pdf


4




Rated pressure


0kPa

Offset voltage

4.5V

0.5V

Output voltage at full scale

Output span voltage


100-31-102-005-DH-0713

100-31-102-005-DH-0713.pdf

100-31-102-019-EH-0110.pdf

Pre-amplified／5V Excitation／Gauge XFGN Data sheet

1

■Features ■Applications On-chip amplification and temperature compensations ・Home use Non-Invasive Blood Pressure (NIBP) monitors Pre-calibration of offset voltage and span ・Vacuum cleaner Surface mount package ・Washing machine ■Part number for ordering

Weight (grams)

0.35

Measurable pressure


0～-24.5 XFGN-603PGVSR 0～-100 XFGN-6100KPGVSR 0～25 XFGN-6025KPGSR 0～50 XFGN-6050KPGSR 0～100 XFGN-6100KPGSR 0～200 XFGN-6200KPGSR

■Specifications Model 603PGV 6100KPGV 6025KPG 6050KPG 6100KPG 6200KPG Unit


Rated pressure -24.5 -100 25 50 100 200 kPa Measurable pressure range 0～-24.5 0～-100 0～25 0～50 0～100 0～200 kPa




Operating temperature -10～80 ℃ Storage temperature -20～100 ℃ Operating humidity 30～80 (Non dew condition) ％RH




Offset voltage * 0.5±0.1 (at 0 kPa ) V Output voltage at full scale * 4.5±0.1 (at rated pressure) V


RoHS compliance

ＸＦＧＮ－６０２５ＫＰＧＳＲ

Model

Length of the pressure port Rated Pressure (kPa)





100-31-102-005-DH-0713

100-31-102-005-DH-0713.pdf

100-31-102-019-EH-0110.pdf


2



View from Lavel

Marking2-φ1.1

XFGN

100-31-102-005-DH-0713

100-31-102-005-DH-0713.pdf

100-31-102-019-EH-0110.pdf


3



Vs=Vcc=5.0V


Model Measurable

pressure range(kPa)

α β Pressure Error(kPa)

XFGN-603PGVSR 0～-24.5 -0.03266 0.1 0.612 XFGN-6100KPGVSR 0～-100 -0.008 0.1 2.5 XFGN-6025KPGSR 0～25 0.032 0.1 0.625 XFGN-6050KPGSR 0～50 0.016 0.1 1.25 XFGN-6100KPGSR 0～100 0.008 0.1 2.5 XFGN-6200KPGSR 0～200 0.004 0.1 5





Rated pressure


0kPa

Offset voltage

4.5V

0.5V


Output span voltage


100-31-102-005-DH-0713

100-31-102-005-DH-0713.pdf

100-31-102-002-EH-0110.pdf

Pre-amplified／5V Excitation／Gauge XFPM Data sheet

1

■Features ■Applications On-chip amplification and temperature compensations ・Industrial instrumentation Pre-calibration of offset voltage and span ・Pressure switch, Pneumatic device Dual-in-line package (DIP) ・Medical device ■Part number for ordering

Weight (grams)

1.2

Measurable pressure


-100～100 XFPM-100KPGW XFPM-100KPGWR 0～-100 XFPM-100KPGV XFPM-100KPGVR 0～25 XFPM-025KPG XFPM-025KPGR 0～50 XFPM-050KPG XFPM-050KPGR 0～100 XFPM-100KPG XFPM-100KPGR 0～200 XFPM-200KPG XFPM-200KPGR 0～1000 XFPM-001MPG XFPM-001MPGR

■Specifications Model 100KPGW 100KPGV 025KPG 050KPG 100KPG 200KPG 001MPG Unit


Rated pressure ±100 -100 25 50 100 200 1000 kPa Measurable pressure range -100～100 0～-100 0～25 0～50 0～100 0～200 0～1000 kPa






－

Maximum excitation voltage 8 VDC Operating temperature -40～125 ℃ Storage temperature -40～125 ℃ Operating humidity 30～80 (Non dew condition) %RH




Offset voltage *1 *2 *3 0.2±0.1125 (at 0 kPa ) V Output voltage at full scale *1 *4 *5 4.7±0.1125 (at rated pressure) V

Accuracy *1 ±2.5 %FS/0～85℃


Pressure type Rated Pressure KP：kPa MP：MPa


No Mark：

R ：

ＸＦＰＭ－０２５ＫＰＧＲ

Model

GW：Gauge Pressure(Positive/Negative pressure)

*1 Excluding input voltage error. *2 0.2±0.1125V(at -100kPa ) *3 0.2±0.1125V(at 0kPa) *4 4.7±0.1125V(at +100kPa) *5 4.7±0.1125V(at -100kPa)

RoHS compliance

100-31-102-005-DH-0713

100-31-102-005-DH-0713.pdf

100-31-102-002-EH-0110.pdf


2


100-31-102-005-DH-0713

100-31-102-005-DH-0713.pdf

100-31-102-002-EH-0110.pdf


3




Vs=Vcc=5.0V


Model Measurable

pressure range(kPa)


XFPM-100KPGW XFPM-100KPGWR -100～100 0.0045 0.49 5 XFPM-100KPGV XFPM-100KPGVR 0～-100 -0.008 0.04 2.5 XFPM-025KPG XFPM-025KPGR 0～25 0.036 0.04 0.625 XFPM-050KPG XFPM-050KPGR 0～50 0.018 0.04 1.25 XFPM-100KPG XFPM-100KPGR 0～100 0.009 0.04 2.5 XFPM-200KPG XFPM-200KPGR 0～200 0.0045 0.04 5 XFPM-001MPG XFPM-001MPGR 0～1000 0.0009 0.04 25

Temperature Error Multiplier

View from Lavel

Marking

100-31-102-005-DH-0713

100-31-102-005-DH-0713.pdf

100-31-102-002-EH-0110.pdf


4


XFPM-100KPGV XFPM-100KPGVR XFPM-025KPG XFPM-025KPGR XFPM-050KPG XFPM-050KPGR XFPM-100KPG XFPM-100KPGR XFPM-200KPG XFPM-200KPGR XFPM-001MPG XFPM-001MPGR

XFPM-100KPGW XFPM-100KPGWR



Rated pressure


0kPa

Offset voltage

4.7V

0.2V


Output span voltage




Offset voltage

4.7V

0.2V


Output span voltage


+100kPa -100kPa 0kPa

100-31-102-005-DH-0713

100-31-102-005-DH-0713.pdf

100-31-102-005-EH-0110.pdf

Pre-amplified／5V Excitation／Absolute XFPM-A Data sheet

1

■Features ■Applications Barometric pressure measurable ・Industrial instrumentation On-chip amplification and temperature compensations ・Medical device Pre-calibration of offset voltage and span ・Barometer, Altimeter Dual-in-line package (DIP) ・Altitude compensation ■Part number for ordering

Weight (grams)

1.5


15～115 XFPM-115KPA XFPM-115KPAR

■Specifications Model XFPM-115KPA ／ XFPM-115KPAR Unit


Rated pressure 115 kPa･abs Measurable pressure range 15～115 kPa･abs








Offset voltage * 0.2±0.1125 (at 15 kPa･abs ) V Output voltage at full scale * 4.7±0.1125 (at 115kPa･abs ) V



ＸＦＰＭ－１１５ＫＰＡＲ

Model

Rated Pressure (kPa)



No Mark：

R ：

RoHS compliance

100-31-102-005-DH-0713

100-31-102-005-DH-0713.pdf

100-31-102-005-EH-0110.pdf


2


100-31-102-005-DH-0713

100-31-102-005-DH-0713.pdf

100-31-102-005-EH-0110.pdf


3




Vs=Vcc=5.0V

P=Input pressure(kPa･abs)

α β Pressure Error (kPa)

0.009 -0.095 2.5


View from Lavel Marking

100-31-102-005-DH-0713

100-31-102-005-DH-0713.pdf

100-31-102-005-EH-0110.pdf


4




Output span voltage

115kPa･abs

→Pressure(kPa･abs) 15kPa･abs

Offset voltage

4.7V

0.2V


100-31-102-005-DH-0713

100-31-102-005-DH-0713.pdf

100-31-102-031-EH-0413.pdf

DATE 29 March, 2013

No. V-70001

Messrs.

SPECIFICATION

Model:

AP2, AG2 Pressure Sensor

Project:

Distributor:

Reference:

Yoshiyuki Uchiumi, Application Engineer

Sensor Department Fujikura Ltd.

Preliminary Edition

Ver. 2.00

This document has a possibility to

be revised without notice.

100-31-102-005-DH-0713

100-31-102-005-DH-0713.pdf

100-31-102-031-EH-0413.pdf

V-70001

1 of 12

Preliminary Edition Ver. 2.00 This document has a possibility to be revised without notice.

1. General

This document describes the specifications of Fujikura Pressure Sensors, AP2 and AG2 series.

2. Principle

Fujikura Pressure Sensor is composed of a silicon piezoresistive pressure sensing chip and a signal

conditioning integrated circuit. The low-level signal from the sensing chip is amplified, temperature

compensated, calibrated, and finally converted to a high-level output signal that is proportional to the applied

pressure.

3. Device Lineup

This device has the following lineup.

Model Pressure

Type

Supply

Voltage Accuracy

Pressure Range (kPa)

-100 0 25 50 100 200 1000

AP2

or

AG2

Gauge

5.0Vdc

or

3.3Vdc

±1.5%FS

3.0Vdc ±2.0%FS Same as the above

4. RoHS

This device is compliant with the Restriction of the use of certain Hazardous Substances in Electrical and

Electronic Equipment (RoHS).

Table shown below is revision records of this specification

Rev.

Est.

Date Name Comment Mark

100-31-102-005-DH-0713

100-31-102-005-DH-0713.pdf

100-31-102-031-EH-0413.pdf

V-70001

2 of 12


5. Block Diagram and Pin Connections

Pin No. Pin Name I/O Type Function

1 VSS - - Common voltage connection

2 VOUT O Analog Analog output

3 VDD - - Power supply connection *1

4 NC - - - *2

5 NC - - - *2

6 NC - - - *2

Notes:

*1) 0.1µF capacitance is recommended to connect VDD Pin 3 with VSS Pin 1.

*2) Pin 4, 5 and 6 must be open.

Temperature Sensor

EEPROM

Pin 2 VOUT

Pin 3 VDD

Sensor Bridge

Buffer

3.0V, 3.3 or 5Vdc

Pin 1 VSS

Pin 4 NC

0.1µF

Power On Reset

Oscillator

ADC DAC MUX DSP

Pre-amplifier

Pin 5 NC

Pin 6 NC

VDD

100-31-102-005-DH-0713

100-31-102-005-DH-0713.pdf

100-31-102-031-EH-0413.pdf

V-70001

3 of 12


6. Device Name Code

The device name code is consisted of Sensor code, Pressure code and Packing style. For the exact ordering

device number, please refer to Section 16 Ordering Information.

7. Absolute Maximum Ratings *1

Item Symbol Rating Unit

Maximum Load Pressure

Pre

ssu

re C

od

e

025KG

Pmax+

+50 kPa

050KG +100 kPa

100KG +200 kPa

200KG +400 kPa

001MG +1.5 MPa

100KV -200 kPa

100KW ±200 kPa

Maximum Input Voltage VDD 6 Vdc

Operating Temperature Topt -40 ~ +125 deg. C

Storage Temperature Tstg -40 ~ +125 deg. C

Note: *1) Absolute maximum ratings are the limits that the device will withstand without damage.

Pin direction for AP2 N : Normal

R : Opposite

Port length for AG2 3 : 3mm

6 : 6mm

AP2 0 N - 025 K G

Model AP2 : DIP (Dual Inline Package) AG2 : SMD (Surface Mount Device)

Supply voltage 0 : 5.0V 1 : 3.3V 2 : 3.0V

- TP

Packing style Blank : Trays TP : Tape & Reel STICK : Sticks

Pressure type G : Gauge/Positive V : Gauge/Negative W : Gauge/Bi-pressure

Unit K : kPa M : MPa Pressure value 025 : 25kPa 050 : 50kPa 100 : 100kPa 200 : 200kPa 001 : 1MPa

Sensor Code Pressure Code

100-31-102-005-DH-0713

100-31-102-005-DH-0713.pdf

100-31-102-031-EH-0413.pdf

V-70001

4 of 12


8. General Specifications

Sensor Code AP20x

AG20x

AP21x

AG21x

AP22x

AG22x Unit

Item Symbol

Supply Voltage VDD 5.0±0.25 3.3±0.165 3.0±0.15 Vdc *1

Type of Pressure - Gauge pressure *2

Pressure Media - Non-corrosive gases *3

Pressure Range Popt Refer to Section 9

Compensated Temperature - 0 ~ +85 deg. C *4

Operating Humidity Hopt 30~85 (non-condensing) %RH *5

Storage Humidity Hstg 30~85 (non-condensing) %RH *5

Dielectric Strength Leakage current 1mA maximum, AC500V, 1minute *6

Insulation Resistance 100MΩ minimum (DC500V) *7

Notes:

*1) Output voltage (Vout) is not perfectly ratio-metric with Supply voltage (VDD).

*2) Gauge pressure is defined as the difference between the pressure applied to the pressure port and an ambient

pressure of the device.

*3) Ensure the pressure media contains no particulates. The device is not compatible with liquids.

*4) Please also refer to Section 12 Transfer Function.

*5) Do not wet the device with dew.

*6) Dielectric strength is defined as the leakage current between all pins and the package with AC500, 1 minute.

*7) Insulation resistance is defined as the resistance value between all pins and the package with DC500V.

9. Pressure Range

Note:

*1) Pressure range is defined as the measurable pressure range of the device. Do not expose intentionally beyond

minimum Popt and maximum Popt.

Pressure Code Symbol Pressure Range *1

Unit Min. Typ. Max.

025KG

Popt

0 - +25 kPa

050KG 0 - +50 kPa

100KG 0 - +100 kPa

200KG 0 - +200 kPa

001MG 0 - +1 MPa

100KV -100 - 0 kPa

100KW -100 - +100 kPa

100-31-102-005-DH-0713

100-31-102-005-DH-0713.pdf

100-31-102-031-EH-0413.pdf

V-70001

5 of 12


10. Electrical Characteristics Ambient temperature Ta=25deg. C

Notes;

*1) Offset voltage (Voff) is defined as the output voltage at minimum Popt. However Offset voltage (Voff) of

100KV is defined as the output voltage of maximum Popt.

*2) Offset error is calibration error of Offset voltage (Voff) at production. It does not include Long term offset

drift. It would be suggested that application has Auto-zeroing function.

*3) Full scale voltage (Vfs) is defined as the output voltage at maximum Popt. However Full scale voltage (Vfs)

of 100KV is defined as the output voltage of minimum Popt.

*4) Output span voltage (SV) is defined as the voltage difference between Offset voltage (Voff) and Full scale

voltage (Vfs).

Item Condition Symbol Rating Unit

Min. Typ. Max.

Sensor Code: AP20x, AG20x (VDD = 5Vdc)

Offset Voltage Non load resistor, Min. Popt 100KV: Max. Popt

Voff 0.1325 0.2 0.2675 V *1, 2

Full Scale Voltage Non load resistor, Max. Popt

100KV: Min. Popt Vfs 4.6325 4.7 4.7675 V *3

Span Voltage Non load resistor, Min. to max. Popt SV - 4.5 - V *4

Accuracy 0 to 85 deg. C, Non load resistor Error -1.5 - +1.5 %FS

*5, 6 -0.0675 - +0.0675 V

Output Resolution Vrso - 2.5 - mV *7

Consumption Current Non load resistor, Min. Popt

100KV: Max. Popt Ic - - 3 mAdc *8

Sensor Code: AP21x, AG21x (VDD = 3.3Vdc)

Offset Voltage Non load resistor, Min. Popt

100KV: Max. Popt Voff 0.2595 0.3 0.3405 V *1, 2

Full Scale Voltage Non load resistor, Max. Popt 100KV: Min. Popt

Vfs 2.9595 3.0 3.0405 V *3



*5, 6 -0.0405 - +0.0405 V


Consumption Current Non load resistor, Min. Popt

100KV: Max. Popt Ic - - 2 mAdc *8

Sensor Code: AP22x, AG22x (VDD = 3.0Vdc)

Offset Voltage Non load resistor, Min. Popt

100KV: Max. Popt Voff 0.096 0.15 0.204 V *1, 2

Full Scale Voltage Non load resistor, Max. Popt

100KV: Min. Popt Vfs 2.796 2.85 2.904 V *3



*5, 6 -0.054 - +0.054 V


Consumption Current Non load resistor, Min. Popt 100KV: Max. Popt

Ic - - 2 mAdc *8

Response Time for reference tr - 1 2 msec. *9

Sampling Frequency fs - 1 - kHz *10

Load Resistor VOUT - VSS or VDD - VOUT RL 2.5 - - kOhm *11

100-31-102-005-DH-0713

100-31-102-005-DH-0713.pdf

100-31-102-031-EH-0413.pdf

V-70001

6 of 12


*5) Accuracy consists of the following:

Non-linearity

Temperature errors over the temperature range 0 to 85 degree C

Pressure hysteresis

Calibration errors of sensitivity and offset

*6) The unit of Accuracy “%FS” is defined as a percent error by Span voltage (SV).

*7) Output voltage (Vout) is generated by the internal digital to analog converter. Therefore the output voltage

has Output resolution (Vrso). Resolution in pressure is calculated as below:

*8) Consumption current (Ic) is increased depending on the value of Load resistor (RL).

*9) Response time (tr) is defined as the time for the change in Output voltage (Vout) from 10% to 90% or from

90% to10% of its final value when the input pressure makes a step change.

*10) Output voltage (Vout) is sampled and held by the internal sampling / hold block. Sampling frequency (fs) is 1

kHz. The output voltage is changed stepwise every approximately 1millisecond.

*11) The value of Load resistor (RL) affects Consumption current (Ic).

Pressure resolution = Vrso SV

×Pressure range (Min. to Max.)

0 kPa

90% of Full Scale Voltage

10% of Full Scale Voltage

tr tr

Offset Voltage

Output Voltage

Input Pressure

1msec

Input pressure Output voltage

1 1 kHz

= 1 msec fs =

100-31-102-005-DH-0713

100-31-102-005-DH-0713.pdf

100-31-102-031-EH-0413.pdf

V-70001

7 of 12


11. Output versus Input Pressure

Sensor

Code

Pressure Code

025KG, 050KG, 100KG,

200KG,001MG 100KV 100KW

AP20x

AG20x

VDD = 5.0 Vdc

Temp. = 0 to 85 ℃

VDD = 5.0 Vdc

Temp. = 0 to 85 ℃

VDD = 5.0 Vdc

Temp. = 0 to 85 ℃

AP21x

AG21x

VDD = 3.3 Vdc

Temp. = 0 to 85 ℃

VDD = 3.3 Vdc

Temp. = 0 to 85 ℃

VDD = 3.3 Vdc

Temp. = 0 to 85 ℃

AP22x

AG22x

VDD = 3.0 Vdc

Temp. = 0 to 85 ℃

VDD = 3.0 Vdc

Temp. = 0 to 85 ℃

VDD = 3.0 Vdc

Temp. = 0 to 85 ℃

Ou

tpu

t

Vspan: 4.5V

Vful: 4.7V

Voff: 0.2V

Min. Popt: 0kPa

Max. Popt: 25, 50, 100, 200kPa, 1MPa

Error:

±1.5%FS

Input Pressure

Ou

tpu

t

Vspan: 4.5V

Vful: 4.7V

Voff: 0.2V

Min. Popt: -100kPa

Max. Popt: 0kPa

Error:

±1.5%FS

Input Pressure

Ou

tpu

t

Vspan: 4.5V

Vful: 4.7V

Voff: 0.2V

Min. Popt: -100kPa

Max. Popt: +100kPa

2.45V

Error:

±1.5%FS

Input Pressure

Ou

tpu

t

Vspan: 2.7V

Vful: 3.0V

Voff: 0.3V

Min. Popt: 0kPa

Max. Popt: 25, 50, 100, 200kPa, 1MPa

Error:

±1.5%FS

Input Pressure

Ou

tpu

t

Vspan: 2.7V

Vful: 3.0V

Voff: 0.3V

Min. Popt: -100kPa

Max. Popt: 0kPa

Error:

±1.5%FS

Input Pressure O

utp

ut

Vspan: 2.7V

Vful: 3.0V

Voff: 0.3V

Min. Popt: -100kPa

Max. Popt: +100kPa

1.65V

Error:

±1.5%FS

Input Pressure

Ou

tpu

t

Vspan: 2.7V

Vful: 2.85V

Voff: 0.15V

Min. Popt: 0kPa

Max. Popt: 25, 50, 100, 200kPa, 1MPa

Error:

±2.0%FS

Input Pressure

Ou

tpu

t

Vspan: 2.7V

Vful: 2.85V

Voff: 0.15V

Min. Popt: -100kPa

Max. Popt: 0kPa

Error:

±2.0%FS

Input Pressure

Vspan: 2.7V

Vful: 2.85V

Voff: 0.15V

Min. Popt: -100kPa

Max. Popt: +100kPa

1.5V

Error:

±2.0%FS

Ou

tpu

t

Input Pressure

100-31-102-005-DH-0713

100-31-102-005-DH-0713.pdf

100-31-102-031-EH-0413.pdf

V-70001

8 of 12


12. Transfer Function

Vout = VDD × ((P × α) + β) ± (Pressure Error × Temperature Error Multiplier × α × Vs)

Parameters

Parameter

VDD (*1) P

(kPa) α β

Pressure Error

(kPa) Sensor Code Pressure Code

AP20x

AG20x

025KG

5.0±0.25V

0 ~ +25 9/250 1/25 0.375

050KG 0 ~ +50 9/500 1/25 0.75

100KG 0 ~ +100 9/1000 1/25 1.5

200KG 0 ~ +200 9/2000 1/25 3.0

001MG 0 ~ +1000 9/10000 1/25 15

100KV -100 ~ 0 -9/1000 1/25 1.5

100KW -100 ~ +100 9/2000 49/100 3.0

AP21x

AG21x

025KG

3.3±0.165V

0 ~ +25 297/9075 1/11 0.375

050KG 0 ~ +50 297/18150 1/11 0.75

100KG 0 ~ +100 297/36300 1/11 1.5

200KG 0 ~ +200 297/72600 1/11 3.0

001MG 0 ~ +1000 297/363000 1/11 15

100KV -100 ~ 0 -297/3630 1/11 1.5

100KW -100 ~ +100 27/6600 1/2 3.0

AP22x

AG22x

025KG

3.0±0.15V

0 ~ +25 9/250 1/20 0.5

050KG 0 ~ +50 9/500 1/20 1

100KG 0 ~ +100 9/1000 1/20 2

200KG 0 ~ +200 9/2000 1/20 4

001MG 0 ~ +1000 9/10000 1/20 20

100KV -100 ~ 0 -9/1000 1/20 2

100KW -100 ~ +100 9/2000 1/2 4

*1) Output voltage (Vout) is not perfectly ratio-metric with the supply voltage (VDD).


85 125 0

1

2

3

4

-40 -20 0 20 40 60 80 100 120

Erro

r M

ult

iplie

r

Temperature (℃)

100-31-102-005-DH-0713

100-31-102-005-DH-0713.pdf

100-31-102-031-EH-0413.pdf

V-70001

9 of 12


13. Device Marking

Notes:

*1) Pin direction for AP2 or Port length for AG2 is not marked on the face plate.

*2) Custom ID will be added when a product is customized for a customer.

Items Marking

Production Lot

Y Last digit of Production year 0~9

M Production month 1, 2, 3 ~ 8, 9, X=Oct., Y=Nov., Z=Dec.

DD Production date 01~31

Sensor Code *1

AP20x AP20

AP21x AP21

AP22x AP22

AG20x AG20

AG21x AG21

AG22x AG22

Pressure Code

025KG 025K

050KG 050K

100KG 100K

200KG 200K

001MG 001M

100KV 100V

100KW 100W

Custom ID If applicable *2

Y M D D

A P 2 0

0 2 5 K

Sensor Code

Pressure Code

Production Lot

Custom ID

Y M D D A G 2 0 0 5 0 K

AP2 AG2

100-31-102-005-DH-0713

100-31-102-005-DH-0713.pdf

100-31-102-031-EH-0413.pdf

V-70001

10 of 12


14. Soldering

Process Model Condition

Hand Soldering AP2xx

AP2xx

Temperature: 350 deg. C max.

Soldering time: 3 seconds max.

*1, 2

Wave Soldering AP2xR

AP2xR

Temperature: 260 deg. C max.


*1, 2

Reflow Soldering AG2xx

AG2xx

A Ramp up 2 to 4 deg. C / sec.

B Pre-heating 150 to 180 deg. C

60 to 120 sec.

C Ramp up 2 to 4 deg. C / sec.

D Heating Above 230 deg. C, 45 sec. max.

245 deg. C max., 10 sec. max.

E Ramp down 2 to 4 deg. C / sec.

*1, 2,

3, 4

Notes:

*1) NEVER wash the device with any washing liquid. NEVER wash the device with any ultrasonic washing

machine.

*2) Do not put the solder and flux on the device’s package.

*3) Temperature means Surface temperature of the device’s package.

*4) Reflow soldering is within two times.

15. Dimensions and Weights

Refer to the following drawing as attached.

Sensor Code Dimension Drawing Weight

AP2xN 9-772-001 approx. 1.4 grams

AP2xR 9-772-002

AG2x3 9-772-003 approx. 0.3 grams


230

245

A B C D E 0

50

100

150

200

250

Tem

pe

ratu

re(℃

)

Time

Soldering Profile

100-31-102-005-DH-0713

100-31-102-005-DH-0713.pdf

100-31-102-031-EH-0413.pdf

V-70001

11 of 12


16. Ordering Information

Model Package Supply

Voltage Pin Direction Packing Ordering Device Number Qty./Packing

AP2 DIP

5.0 Vdc

Normal Trays AP20N- [Pressure Code] TBD Pcs/Tray

Sticks AP20N- [Pressure Code] -STICK TBD Pcs/Stick

Opposite Trays AP20R- [Pressure Code] TBD Pcs/Tray

Sticks AP20R- [Pressure Code] -STICK TBD Pcs/Stick

3.3 Vdc





3.0 Vdc





Port Length

AG2 SMD

5.0 Vdc

3mm Trays AG203- [Pressure Code] TBD Pcs/Tray

Tape & Reel AG203- [Pressure Code] -TP TBD Pcs/Reel



3.3 Vdc





3.0 Vdc





Pressure Range Pressure Code

0 ~ +25kPa 025KG

0 ~ +50kPa 050KG

0 ~ +100kPa 100KG

0 ~ +200kPa 200KG

0 ~ +1MPa 001MG

0 ~ -100kPa 100KV

-100 ~ +100kPa 100KW

17. Tape & Reel Information

Pin 6

Feed direction

Pin 1 Index

Reel Embossed carrier tape

100-31-102-005-DH-0713

100-31-102-005-DH-0713.pdf

100-31-102-031-EH-0413.pdf

V-70001

12 of 12


18. Footprint for PCB (for Reference)

Sensor Code Footprint

AP2xN

AP2xR

AG2x3

AG2x6

Notes:

*1) These footprints are for reference. Please evaluate well these footprints, before your mass production.

*2) When designing your PCB, please also refer to the outline diagrams.

15.2 mm

2.54 mm

2.54 mm

6 - φ1.8 mm

6 - φ0.9 mm

Land pads

Hole for Pressure Port

Diameter is depending on your design.

15.2 mm

2.54 mm

2.54 mm

6 - φ1.8 mm

6 - φ0.9 mm

Land pads

9.4 mm

2.54 mm

2.54 mm 1.4 mm

1.7 mm

Land pads

9.4 mm

2.54 mm

2.54 mm 1.4 mm

1.7 mm

6.0 mm

6.0 mm

2 - φ1.1 mm (Holes for Projections)

Land pads

100-31-102-005-DH-0713

100-31-102-005-DH-0713.pdf

100-31-102-031-EH-0413.pdf

100-31-102-005-DH-0713

100-31-102-005-DH-0713.pdf

We are here for you. Addresses and Contacts

Sales Austria

Kurt StritzelbergerNeumarkter Str. 86aD-81673 Munich

Phone + 49 89 260 38 47Mobile + 49 17 18 03 41 35Fax + 49 89 43 10 91 91

[email protected]

Supporting your great ideas www.pewatron.com

Sales Switzerland

Postcode 3000 – 9999Liechtenstein

Matthias RüeggRuhbergstrasse 32CH-9230 Flawil

Phone + 41 44 877 35 18Mobile + 41 76 491 66 66Fax + 41 44 877 35 19

[email protected]

Postcode 1000 – 2999

Raffael FavarettoRoute d’Oron 124CH-1673 Promasens

Phone + 41 44 877 35 22Mobile + 41 76 444 63 14Fax + 41 44 877 35 23

[email protected]

Postcode 10000 –59999Postcode 80000 –99999


Phone + 49 89 260 38 47Mobile + 49 171 803 41 35Fax + 49 89 43 10 91 91

[email protected]

Sales Germany

Postcode 60000 – 79999

Dieter HirtheMühlweg 23D-71554 Weissach i.T.

Phone + 49 719 149 60 58Mobile + 49 163 762 74 30Fax + 49 719 193 31 88

[email protected]

Key Accounts Aerospace and Defence

Claus WübbenaVogelkamp 26D-26655 Westerstede

Phone + 49 4488 5204 614Mobile + 49 173 9700 691Fax + 49 4488 5204 616

[email protected]

Power Supplies

DC-DC ConvertersSwitching Power SuppliesDC-AC Inverters

Sebastiano LeggioPhone + 41 44 877 35 [email protected]

E-Components

Current SensorsMan Machine InterfaceMeasurement Probes


Sales Other Countries / Product Management

PEWATRON AGThurgauerstrasse 66CH-8052 Zurich

Phone + 41 44 877 35 00Fax + 41 44 877 35 25

[email protected]

Sensors

Physical SensorsData Acquisition

Peter FelderPhone + 41 44 877 35 [email protected]

Geometrical Sensors

Eric LetschPhone + 41 44 877 35 14 [email protected]

100-31-102-005-DH-0713

100-31-102-005-DH-0713.pdf

100-33-102-001-EH-0713.pdf

DATE 20 June, 2013

No. V-70033

Messrs.

SPECIFICATION

Model:

AP4, AG4 Pressure Sensor

Project:

Distributor:

Reference:

Yoshiyuki Uchiumi, Application Engineer

Sensor Department Fujikura Ltd.

Preliminary Edition

rev. 1.00

This document has a possibility to

be revised without notice.

100-31-102-005-DH-0713

100-31-102-005-DH-0713.pdf

100-33-102-001-EH-0713.pdf

V-70033

1 of 17

Preliminary Edition rev. 1.00 This document has a possibility to be revised without notice.

Table of Contents

1. General .......................................................................................................................................... 2

2. Principle ........................................................................................................................................ 2

3. Device Lineup ............................................................................................................................... 2

4. RoHS ............................................................................................................................................ 2

5. Block Diagram and Pin Connections............................................................................................ 3

6. Device Name Code ....................................................................................................................... 4

7. Absolute Maximum Ratings ......................................................................................................... 5

8. General Specifications .................................................................................................................. 5

9. Pressure Range ............................................................................................................................. 6

10. Electrical Characteristics .............................................................................................................. 6

11. Communication Interface ............................................................................................................. 7

12. Communication Protocol .............................................................................................................. 7

13. Output versus Input Pressure ........................................................................................................ 8

14. Transfer Function ......................................................................................................................... 9

15. Operating Sequence ...................................................................................................................... 9

16. Device Marking .......................................................................................................................... 10

17. Soldering ..................................................................................................................................... 11

18. Dimensions and Weights ............................................................................................................ 11

19. Ordering Information .................................................................................................................. 12

20. Tape & Reel Information ............................................................................................................ 12

21. Footprint for PCB (for Reference).............................................................................................. 13

Appendix: Dimension Drawing ......................................................................................................... 14

9-772-001 APxxN .......................................................................................................................... 14

9-772-002 APxxR .......................................................................................................................... 15

9-772-003 AGxx3 .......................................................................................................................... 16

9-772-004 AGxx6 .......................................................................................................................... 17

100-31-102-005-DH-0713

100-31-102-005-DH-0713.pdf

100-33-102-001-EH-0713.pdf

V-70033

2 of 17


1. General This document describes the specifications of Fujikura Pressure Sensors, AP4 and AG4 series.

2. Principle Fujikura Pressure Sensor is composed of a silicon piezoresistive pressure sensing chip and a signal

conditioning integrated circuit. The low-level signal from the sensing chip is amplified, temperature

compensated, calibrated, and finally converted to digital data that is proportional to the applied pressure.

3. Device Lineup This device has the following lineup.

Model Pressure

Type

Supply

Voltage Accuracy

Pressure Range (kPa)

-100 0 25 50 100 200 1000

AP4

or

AG4

Gauge

5.0Vdc

3.3Vdc

3.0Vdc

±1.5%FS

Features

Digital Output

High Accuracy

4. RoHS This device is compliant with the Restriction of the use of certain Hazardous Substances in Electrical and

Electronic Equipment (RoHS).

Table shown below is revision records of this specification

Rev.

Est.

Date Name Comment Mark

100-31-102-005-DH-0713

100-31-102-005-DH-0713.pdf

100-33-102-001-EH-0713.pdf

V-70033

3 of 17


5. Block Diagram and Pin Connections

Pin Assignment Pin

No.

Pin

Name I/O Type Function

AP4 AG4

1 NC - - - *1

2 SDA I/O Digital Serial bidirectional data

3 SCL I Digital Serial clock input *2

4 VDD - - Power supply connection *1

5 VSS - - Common voltage connection

6 NC - - -

Notes:

*1) Put a 0.1µF capacitor between VDD Pin 4 and VSS Pin 5.

*2) Pin 1 and 6 must be open.

Temperature Sensor

EEPROM

Pin 2 SDA

Pin 4 VDD

Sensor Bridge

3.0, 3.3 or 5.0Vdc

Pin 5 VSS

0.1µF

Power On Reset

Oscillator

ADC MUX DSP

Pre-amplifier

VDD

Communication Interface

Pin 3 SCL

Pin 1 NC

Pin 6 NC

Rpu x 2

4 5 6

1 2 3

Index

Pipe

4 5 6

1 2 3

Index

Pipe

100-31-102-005-DH-0713

100-31-102-005-DH-0713.pdf

100-33-102-001-EH-0713.pdf

V-70033

4 of 17


6. Device Name Code The device name code is consisted of Sensor code, Pressure code, Slave address core and Packing style. For

the exact ordering device number, please refer to Chapter 19 Ordering Information.

Pin direction for AP2 N : Normal

R : Opposite

Port length for AG2 3 : 3mm

6 : 6mm

AP4 0 N - 025 K G

Model AP4 : DIP (Dual Inline Package) AG4 : SMD (Surface Mount Device)

Supply voltage 0 : 5.0Vdc 1 : 3.3Vdc 2 : 3.0Vdc

- STICK

Packing style Blank : Tray TP : Tape & Reel STICK : Stick

Pressure type G : Gauge/Positive V : Gauge/Negative W : Gauge/Bi-pressure

Unit K : kPa M : MPa Pressure value 025 : 25kPa 050 : 50kPa 100 : 100kPa 200 : 200kPa 001 : 1MPa

Sensor Code Pressure Code

-

Slave address code Blank : 0x28(Default) 3 : 0x38

7 : 0x78

or Custom ID: if applicable

100-31-102-005-DH-0713

100-31-102-005-DH-0713.pdf

100-33-102-001-EH-0713.pdf

V-70033

5 of 17


7. Absolute Maximum Ratings

Item Symbol Rating

Unit Min. Typ. Max.

Load Pressure

Pre

ssu

re C

od

e

025KG

Pmax+

- - +50 kPa

050KG - - +100 kPa

100KG - - +200 kPa

200KG - - +400 kPa

001MG - - +1.5 MPa

100KV - - +200 kPa

100KW - - +200 kPa

Supply Voltage VDDmax -0.3 - 6 Vdc

Voltage at Digital I/O pins Vdiomax -0.3 - VDD+0.3 Vdc

Operating Temperature Topt -40 - +125 deg. C

Storage Temperature Tstg -40 - +125 deg. C

Note: *1) Absolute maximum ratings are the limits that the device will withstand without damage.

8. General Specifications

Sensor Code AP40x

AG40x

AP41x

AG41x

AP42x

AG42x Unit

Item Symbol

Supply Voltage VDD 5.0±0.25 3.3±0.165 3.0±0.15 Vdc *1

Type of Pressure - Gauge pressure *2

Pressure Media - Non-corrosive gases *3

Pressure Range Popt Refer to Chapter 9

Compensated Temperature - 0 ~ +85 deg. C *4

Operating Humidity Hopt 30~85 (non-condensing) %RH *5

Storage Humidity Hstg 30~85 (non-condensing) %RH *5

Dielectric Strength Leakage current 1mA maximum, AC500V, 1minute *6

Insulation Resistance 100MΩ minimum (DC500V) *7

Notes:

*1) Supply (VDD) should be constant.

*2) Gauge pressure is defined as the difference between the pressure applied to the pressure port and an

atmospheric pressure of the device.

*3) Ensure the pressure media contains no particulates. The device is not compatible with liquids.

*4) Please also refer to Chapter 14 Transfer Function.

*5) Do not wet the device with dew.

*6) Dielectric strength is defined as the leakage current between all pins and the package with AC500, 1 minute.

*7) Insulation resistance is defined as the resistance value between all pins and the package with DC500V.

100-31-102-005-DH-0713

100-31-102-005-DH-0713.pdf

100-33-102-001-EH-0713.pdf

V-70033

6 of 17


9. Pressure Range

Note:

*1) Pressure range is defined as the measurable pressure range of the device. Do not expose intentionally beyond

minimum Popt and maximum Popt.

10. Electrical Characteristics

Notes;

*1) Offset pressure data (Doff) is defined as the pressure data at minimum Popt. In case of 100KV, Offset

pressure data (Doff) is defined as the pressure data of maximum Popt.

*2) Offset error is calibration error of Offset pressure data (Doff) at production. It does not include Long term

offset drift. It would be suggested that applications have Auto-zeroing function.

*3) Full scale pressure data (Dfs) is defined as the pressure data at maximum Popt. In case of 100KV, Full scale

pressure data (Dfs) is defined as the pressure data of minimum Popt.

*4) Span pressure data (SD) is defined as the pressure data difference between Offset pressure data (Doff) and

Full scale pressure data (Dfs).

*5) Accuracy consists of the following:

Non-linearity

Temperature errors over the temperature range 0 to 85 degree C

Pressure hysteresis

Calibration errors of sensitivity and offset

*6) The unit of Accuracy “%FS” is defined as a percent error by Span pressure data (SD).

*7) Response time is defined as the time of 1 cycle measurement sequence.

Pressure Code Symbol Pressure Range *1

Unit Min. Typ. Max.

025KG

Popt

0 - +25 kPa

050KG 0 - +50 kPa

100KG 0 - +100 kPa

200KG 0 - +200 kPa

001MG 0 - +1 MPa

100KV -100 - 0 kPa

100KW -100 - +100 kPa

Ambient temperature Ta=25deg. C

Item Condition Symbol Rating

Unit Min. Typ. Max.

Offset Pressure Data Min. Popt, 100KV: Max. Popt Doff 598 819 1040 Count *1, 2

Full Scale Pressure Data Max. Popt, 100KV: Min. Popt Dfs 15344 15565 15786 Count *3

Span Pressure Data Min. to max. Popt SD - 14746 - Count *4

Accuracy 0 to 85 deg. C Error -1.5 - +1.5 %FS *5, 6

Consumption Current Ic - - 3 mAdc

Response Time for reference tr - - 2 msec. *7

100-31-102-005-DH-0713

100-31-102-005-DH-0713.pdf

100-33-102-001-EH-0713.pdf

V-70033

7 of 17


11. Communication Interface

Notes:

*1) I2C

TM is a trademark of NXP.

*2) Slave address is available from 0x38 to 0x78 as optional. Please designate the slave address in the device

name code.

12. Communication Protocol Item

Measurement Packet

Ambient temperature Ta=25deg. C

Item Condition Symbol Rating

Unit Min. Typ. Max.

Interface I2CTM *1

Input Low Voltage VIL 0 - 0.2 V

Input High Voltage VIH 0.8 - 1 V

Output Low Voltage VOL - - 0.1 V

Load Capacitance Pin2 SDA, 400kHz Cmax - - 200 pF

Pull-up Resistor Pin2 SDA, Pin3 SCL Rpu 1 - - kΩ

Slave address 7 bit 0x28 *2

S

6 A

R

15

13 N

S

S 6 5 4 3 2 1 0 R A 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 A N

Slave Address

[6:0] Pressure Data

[13:8]

Pressure Data

[7:0]

S

Start Condition

Slave Address

Data Bit

Read (1)

ACK

NACK

Status Bit

Stop Condition

100-31-102-005-DH-0713

100-31-102-005-DH-0713.pdf

100-33-102-001-EH-0713.pdf

V-70033

8 of 17


13. Output versus Input Pressure

Pressure Code Output vs. Input pressure

025KG,

050KG,

100KG,

200KG,

001MG

Temp. = 0 to 85 ℃

100KV

Temp. = 0 to 85 ℃

100KW

Temp. = 0 to 85 ℃

Co

un

t

SD: 14746

Dfs: 15565

Doff: 819

Min. Popt: 0kPa

Max. Popt: 25, 50, 100, 200kPa, 1MPa

Error:

±1.5%FS

Input Pressure

Co

un

t

SD: 14746

Dfs: 15565

Doff: 819

Min. Popt: -100kPa

Max. Popt: 0kPa

Error:

±1.5%FS

Input Pressure

Co

un

t

SD: 14746

Dfs: 15565

Doff: 819

Min. Popt: -100kPa

Max. Popt: +100kPa

8192

Error:

±1.5%FS

Input Pressure

0kPa

100-31-102-005-DH-0713

100-31-102-005-DH-0713.pdf

100-33-102-001-EH-0713.pdf

V-70033

9 of 17


14. Transfer Function

Pressure Data (Count) = P × α + β ± (Pressure Error × Temperature Error Multiplier)

Parameters

Parameter

Pressure Code

P

(kPa) α β

Pressure Error

(Count)

025KG 0 ~ +25 14746/25 819 221

050KG 0 ~ +50 7373/25 819 221

100KG 0 ~ +100 7373/50 819 221

200KG 0 ~ +200 7373/100 819 221

001MG 0 ~ +1000 7373/500 819 221

100KV -100 ~ 0 -7373/50 819 221

100KW -100 ~ +100 7373/100 8192 221


15. Operating Sequence

85 125 0

1

2

3

4

-40 -20 0 20 40 60 80 100 120

Erro

r M

ult

iplie

r

Temperature (℃)

Supply Voltage VDD

Sensor Status

2.7V

Operation

Initializing

VSS

10 msec Max.

100-31-102-005-DH-0713

100-31-102-005-DH-0713.pdf

100-33-102-001-EH-0713.pdf

V-70033

10 of 17


16. Device Marking

Notes:

*1) Pin direction for AP4 or Port length for AG4 is not marked on the face plate.

*2) Custom ID will be added when a product is customized for a customer.

Items Marking

Production Lot

Y Last digit of Production year 0~9

M Production month 1, 2, 3 ~ 8, 9, X=Oct., Y=Nov., Z=Dec.

DD Production date 01~31

Sensor Code *1

AP40x AP40

AP41x AP41

AP42x AP42

AG40x AG40

AG41x AG41

AG42x AG42

Pressure Code

025KG 025K

050KG 050K

100KG 100K

200KG 200K

001MG 001M

100KV 100V

100KW 100W

Slave Address Code

Blank Blank

3 3

4 4

5 5

6 6

7 7

Custom ID If applicable *2

Y M D D

A P 4 0

0 2 5 K

Sensor Code

Pressure Code

Production Lot

Slave Address or Custom ID

Y M D D A G 4 0 0 5 0 K

Faceplate

AG4

AP4xR Only

Y M

Y M D

D

AP4

Pressure Port

Sensor Code

Pressure Code

Production Lot

Slave Address or Custom ID

100-31-102-005-DH-0713

100-31-102-005-DH-0713.pdf

100-33-102-001-EH-0713.pdf

V-70033

11 of 17


17. Soldering Process Sensor code Condition

Hand Soldering AP4xx Soldering iron temperature: 350 deg. C max.


*1, 2

Wave Soldering AP4xR Soldering bath temperature: 260 deg. C max.


*1, 2

Reflow Soldering AG4xx

A Ramp up 2 to 4 deg. C / sec.

B Pre-heating 150 to 180 deg. C

60 to 120 sec.

C Ramp up 2 to 4 deg. C / sec.

D Heating Above 230 deg. C, 45 sec. max.

245 deg. C max., 10 sec. max.

E Ramp down 2 to 4 deg. C / sec.

*1, 2,

3, 4

Notes:

*1) NEVER wash the device with any washing liquid. NEVER wash the device with any ultrasonic washing

machine.

*2) Do not put the solder and flux on the device’s package.

*3) Temperature means Surface temperature of the device’s package.

*4) Reflow soldering is within two times.

18. Dimensions and Weights Refer to the following drawing as attached.

Sensor Code Dimension Drawing Weight

AP4xN 9-772-001 approx. 1.4 grams

AP4xR 9-772-002



230

245

A B C D E 0

50

100

150

200

250

Tem

pe

ratu

re(℃

)

Time

Soldering Profile

100-31-102-005-DH-0713

100-31-102-005-DH-0713.pdf

100-33-102-001-EH-0713.pdf

V-70033

12 of 17


19. Ordering Information

Model Package Supply

Voltage

Pin

Direction Packing Ordering Device Number Qty./Packing

AP4 DIP

5.0 Vdc

Normal Tray AP40N- [Pressure Code] -[Slave] 150 Pcs/Tray

Stick AP40N- [Pressure Code] -[Slave] -STICK 40 Pcs/Stick

Opposite Tray AP40R- [Pressure Code] -[Slave] 150 Pcs/Tray

Stick AP40R- [Pressure Code] -[Slave] -STICK 40 Pcs/Stick

3.3 Vdc





3.0 Vdc





Port Length

AG4 SMD

5.0 Vdc

3mm Tray AG403- [Pressure Code] -[Slave] 300 Pcs/Tray

Tape & Reel AG403- [Pressure Code] -[Slave] -TP 500 Pcs/Reel



3.3 Vdc





3.0 Vdc





Pressure Range Pressure Code

Slave Address Slave Address Code

0 ~ +25kPa 025KG 0x28 Blank

0 ~ +50kPa 050KG 0x38 3

0 ~ +100kPa 100KG 0x48 4

0 ~ +200kPa 200KG 0x58 5

0 ~ +1MPa 001MG 0x68 6

0 ~ -100kPa 100KV 0x78 7

-100 ~ +100kPa 100KW Custom ID If applicable

20. Tape & Reel Information

Pin 6

Feed direction

Pin 1 Index

Reel Embossed carrier tape

100-31-102-005-DH-0713

100-31-102-005-DH-0713.pdf

100-33-102-001-EH-0713.pdf

V-70033

13 of 17


21. Footprint for PCB (for Reference) Sensor Code Footprint

AP4xN

AP4xR

AG4x3

AG4x6

Notes:

*1) These footprints are for reference. Please evaluate well these footprints, before your mass production.

*2) When designing your PCB, please also refer to the outline diagrams.

15.2 mm

2.54 mm

2.54 mm

6 - φ1.8 mm

6 - φ0.9 mm

Land pads

Hole for Pressure Port

Diameter is depending on your design.

15.2 mm

2.54 mm

2.54 mm

6 - φ1.8 mm

6 - φ0.9 mm

Land pads

9.4 mm

2.54 mm

2.54 mm 1.4 mm

1.7 mm

Land pads

9.4 mm

2.54 mm

2.54 mm 1.4 mm

1.7 mm

6.0 mm

6.0 mm

2 - φ1.1 mm (Holes for Projections)

Land pads

100-31-102-005-DH-0713

100-31-102-005-DH-0713.pdf

100-33-102-001-EH-0713.pdf

14 of 17

Appendix: Dimension Drawing

9-772-001 APxxN

100-31-102-005-DH-0713

100-31-102-005-DH-0713.pdf

100-33-102-001-EH-0713.pdf

15 of 17

9-772-002 APxxR

100-31-102-005-DH-0713

100-31-102-005-DH-0713.pdf

100-33-102-001-EH-0713.pdf

16 of 17

9-772-003 AGxx3

100-31-102-005-DH-0713

100-31-102-005-DH-0713.pdf

100-33-102-001-EH-0713.pdf

17 of 17

9-772-004 AGxx6

100-31-102-005-DH-0713

100-31-102-005-DH-0713.pdf

We are here for you. Addresses and Contacts

Sales Austria


Phone + 49 89 260 38 47Mobile + 49 17 18 03 41 35Fax + 49 89 43 10 91 91

[email protected]


Sales Switzerland

Postcode 3000 – 9999Liechtenstein


Phone + 41 44 877 35 18Mobile + 41 76 491 66 66Fax + 41 44 877 35 19

[email protected]

Postcode 1000 – 2999

Raffael FavarettoRoute d’Oron 124CH-1673 Promasens

Phone + 41 44 877 35 22Mobile + 41 76 444 63 14Fax + 41 44 877 35 23

[email protected]

Postcode 10000 –59999Postcode 80000 –99999


Phone + 49 89 260 38 47Mobile + 49 171 803 41 35Fax + 49 89 43 10 91 91

[email protected]

Sales Germany

Postcode 60000 – 79999


Phone + 49 719 149 60 58Mobile + 49 163 762 74 30Fax + 49 719 193 31 88

[email protected]



Phone + 49 4488 5204 614Mobile + 49 173 9700 691Fax + 49 4488 5204 616

[email protected]

Power Supplies

DC-DC ConvertersSwitching Power SuppliesDC-AC Inverters


E-Components

Current SensorsMan Machine InterfaceMeasurement Probes


Sales Other Countries / Product Management

PEWATRON AGThurgauerstrasse 66CH-8052 Zurich

Phone + 41 44 877 35 00Fax + 41 44 877 35 25

[email protected]

Sensors

Physical SensorsData Acquisition

Peter FelderPhone + 41 44 877 35 [email protected]

Geometrical Sensors

Eric LetschPhone + 41 44 877 35 14 [email protected]

100-31-102-005-DH-0713

100-31-102-005-DH-0713.pdf

100-31-102-020-EH-0110.pdf

Pre-amplified／5V Excitation／Gauge XFGM Data sheet

1

■Features ■Applications On-chip amplification and temperature compensations ・Industrial instrumentation Pre-calibration of offset voltage and span ・Pressure switch, Pneumatic device Surface mount package ・Medical device ■Part number for ordering

Weight(grams)

Weight (grams)

0.3

0.35

Part number for ordering Measurable pressure

range(kPa) 3mm pressure port 6mm pressure port -100～100 XFGM-3100KPGWSR XFGM-6100KPGWSR

0～-100 XFGM-3100KPGVSR XFGM-6100KPGVSR 0～25 XFGM-3025KPGSR XFGM-6025KPGSR 0～50 XFGM-3050KPGSR XFGM-6050KPGSR 0～100 XFGM-3100KPGSR XFGM-6100KPGSR 0～200 XFGM-3200KPGSR XFGM-6200KPGSR 0～1000 XFGM-3001MPGSR XFGM-6001MPGSR









－





Offset voltage *1 *2 *3 0.2±0.1125 (at 0 kPa ) V Output voltage at full scale *1 *4 *5 4.7±0.1125 (at rated pressure) V

Accuracy *1 ±2.5 %FS/0～85℃

RoHS compliance


Pressure type


Rated Pressure KP：kPa MP：MPa

ＸＦＧＭ－６０２５ＫＰＧＳＲ

Model

Length of the pressure port


3：3mm 6：6mm

*1 Excluding input voltage error. *2 0.2 ±0.1125V(at -100kPa ) *3 0.2 ±0.1125V(at 0kPa) *4 4.7 ±0.1125V(at +100kPa) *5 4.7 ±0.1125V(at -100kPa)

100-31-102-005-DH-0713

100-31-102-005-DH-0713.pdf

100-31-102-020-EH-0110.pdf


2


2-φ1.1

100-31-102-005-DH-0713

100-31-102-005-DH-0713.pdf

100-31-102-020-EH-0110.pdf


3




Vs=Vcc=5.0V


Model Measurable

pressure range(kPa)


XFGM-3100KPGWSR XFGM-6100KPGWSR -100～100 0.0045 0.49 5 XFGM-3100KPGVSR XFGM-6100KPGVSR 0～-100 -0.008 0.04 2.5 XFGM-3025KPGSR XFGM-6025KPGSR 0～25 0.036 0.04 0.625 XFGM-3050KPGSR XFGM-6050KPGSR 0～50 0.018 0.04 1.25 XFGM-3100KPGSR XFGM-6100KPGSR 0～100 0.009 0.04 2.5 XFGM-3200KPGSR XFGM-6200KPGSR 0～200 0.0045 0.04 5 XFGM-3001MPGSR XFGM-6001MPGSR 0～1000 0.0009 0.04 25


View from Lavel

Marking

100-31-102-005-DH-0713

100-31-102-005-DH-0713.pdf

100-31-102-020-EH-0110.pdf


4


XFGM-3100KPGVSR XFGM-6100KPGVSR XFGM-3025KPGSR XFGM-6025KPGSR XFGM-3050KPGSR XFGM-6050KPGSR XFGM-3100KPGSR XFGM-6100KPGSR XFGM-3200KPGSR XFGM-6200KPGSR XFGM-3001MPGSR XFGM-6001MPGSR

XFGM-3100KPGWSR XFGM-6100KPGWSR




Offset voltage

4.7V

0.2V


Output span voltage


+100kPa -100kPa 0kPa


Rated pressure


0kPa

Offset voltage

4.7V

0.2V


Output span voltage


100-31-102-005-DH-0713

100-31-102-005-DH-0713.pdf

100-31-102-004-EH-0110.pdf

Pre-amplified／5V Excitation／Differential XFDM Data sheet

1

■Features ■Applications Dif ferential pressure ・Industrial instrumentation On-chip amplification and temperature compensations ・Pressure switch, Pneumatic device Pre-calibration of offset voltage and span ・Medical device Surface mount package ■Part number for ordering

Weight (grams)

1.3

Measurable pressure


-100～100 XFDM-100KPDWSR 0～25 XFDM-025KPDSR 0～50 XFDM-050KPDSR 0～100 XFDM-100KPDSR 0～200 XFDM-200KPDSR 0～1000 XFDM-001MPDSR

■Specifications Model 100KPDW 025KPD 050KPD 100KPD 200KPD 001MPD Unit

Recommended operating conditions Pressure type Differential pressure －

Rated pressure ±100 25 50 100 200 1000 kPa Measurable pressure range -100～100 0～25 0～50 0～100 0～200 0～1000 kPa


Supply voltage（constant） 5±0.25 VDC Absolute maximum rating Maximum differential pressure *1 Port1 Maximum load pressure Port2 Maximum load pressure


1.5 times of rating

pressure －




Response time 2 (for the reference) msec Output span voltage 4.5 V Offset voltage *2,*3 *4 0.2±0.1125 (at 0 kPa ) V

Output voltage at full scale *2,*3 *5 4.7±0.1125 (at rated pressure) V Accuracy *2,*3 ±2.5 %FS/0～85℃


DW：Differential Pressure(Positive/Negative pressure) D：Differential (Positive pressure)


ＸＦＤＭ－０２５ＫＰＤＳＲ

Model

RoHS compliance

*1 Port1 pressure >Port2 pressure , Port2 pressure：reference pressure *2 Output refers to pressure at pressure port2. *3 Excluding input voltage error. *4 0.2 ±0.1125V(at -100kPa) *5 4.7 ±0.1125V(at +100kPa)

100-31-102-005-DH-0713

100-31-102-005-DH-0713.pdf

100-31-102-004-EH-0110.pdf


2



View from Lavel

Marking

100-31-102-005-DH-0713

100-31-102-005-DH-0713.pdf

100-31-102-004-EH-0110.pdf


3



Vs=Vcc=5.0V

P=Pressure(kPa) =Port1 pressure - Port2 pressure

(Port1 pressure >Port2 pressure) Output refers to pressure at pressure port2.

Model Measurable

pressure range(kPa)


XFDM-100KPDWSR -100～100 0.0045 0.49 5 XFDM-025KPDSR 0～25 0.036 0.04 0.625 XFDM-050KPDSR 0～50 0.018 0.04 1.25 XFDM-100KPDSR 0～100 0.009 0.04 2.5 XFDM-200KPDSR 0～200 0.0045 0.04 5 XFDM-001MPDSR 0～1000 0.0009 0.04 25


100-31-102-005-DH-0713

100-31-102-005-DH-0713.pdf

100-31-102-004-EH-0110.pdf


4


XFDM-025KPDSR XFDM-050KPDSR XFDM-100KPDSR XFDM-200KPDSR XFDM-001MPDSR

XFDM-100KPDWSR



Rated pressure

→Pressure（kPa） 0kPa

Offset voltage

4.7V

0.2V


Output span voltage





Offset voltage

4.7V

0.2V


Output span voltage


+100kPa-100kPa 0kPa


100-31-102-005-DH-0713

100-31-102-005-DH-0713.pdf

100-31-102-003-EH-0110.pdf

Pre-amplified／5V Excitation／Gauge XFHM Data sheet

1

■Features ■Applications On-chip amplification and temperature compensations ・Industrial instrumentation Pre-calibration of offset voltage and span ・Pressure switch, Pneumatic device Horizonral pressure port ・Medical device ■Part number for ordering

Weight (grams)

0.6

Measurable pressure


-100～100 XFHM-100KPGWR 0～-100 XFHM-100KPGVR 0～25 XFHM-025KPGR 0～50 XFHM-050KPGR 0～100 XFHM-100KPGR 0～200 XFHM-200KPGR 0～1000 XFHM-001MPGR









－





Offset voltage * *2 *3 0.2±0.1125 (at 0 kPa ) V Output voltage at full scale * *4 *5 4.7±0.1125 (at rated pressure) V




Terminal leadsdirection ＸＦＨＭ－０２５ＫＰＧＲ

Model


Ｒ：

*1 Excluding input voltage error. *2 0.2 ±0.1125V(at -100kPa ) *3 0.2 ±0.1125V(at 0kPa) *4 4.7 ±0.1125V(at +100kPa) *5 4.7 ±0.1125V(at -100kPa)

RoHS compliance

100-31-102-005-DH-0713

100-31-102-005-DH-0713.pdf

100-31-102-003-EH-0110.pdf


2



View from Lavel

Marking

100-31-102-005-DH-0713

100-31-102-005-DH-0713.pdf

100-31-102-003-EH-0110.pdf


3



Vs=Vcc=5.0V


Model Measurable

pressure range(kPa)


XFHM-100KPGWR -100～100 0.0045 0.49 5 XFHM-100KPGVR 0～-100 -0.008 0.04 2.5 XFHM-025KPGR 0～25 0.036 0.04 0.625 XFHM-050KPGR 0～50 0.018 0.04 1.25 XFHM-100KPGR 0～100 0.009 0.04 2.5 XFHM-200KPGR 0～200 0.0045 0.04 5 XFHM-001MPGR 0～1000 0.0009 0.04 25

温度誤差係数

100-31-102-005-DH-0713

100-31-102-005-DH-0713.pdf

100-31-102-003-EH-0110.pdf


4


XFHM-100KPGWR XFHM-100KPGVR XFHM-025KPGR XFHM-050KPGR XFHM-100KPGR XFHM-200KPGR

XFHM-100KPGWR




Offset voltage

4.7V

0.2V


Output span voltage


+100kPa-100kPa 0kPa


Rated pressure

→Pressure（kPa） 0kPa

Offset voltage

4.7V

0.2V


Output span voltage


100-31-102-005-DH-0713

100-31-102-005-DH-0713.pdf

100-31-102-006-EH-0110.pdf

Pre-amplified／5V Excitation／Absolute XFAM Data sheet

1

■Features ■Applications Barometric pressure measurable ・Industrial instrumentation On-chip amplification and temperature compensations ・Medical device Pre-calibration of offset voltage and span ・Barometer, Altimeter Surface mount package ・Altitude compensation ■Part number for ordering

Weight (grams)

0.3


15～115 XFAM-115KPASR

■Specifications Model XFAM-115KPASR Unit


Rated pressure 115 kPa･abs Measurable pressure range 15～115 kPa･abs








Offset voltage * 0.2±0.1125 (at 15 kPa･abs ) V Output voltage at full scale * 4.7±0.1125 (at 115kPa･abs ) V


ＸＦＡＭ－１１５ＫＰＡＳＲ


Model

Rated Pressure (kPa)



RoHS compliance

100-31-102-005-DH-0713

100-31-102-005-DH-0713.pdf

100-31-102-006-EH-0110.pdf


2



View from Lavel

Marking

ＸＦＡＭ

100-31-102-005-DH-0713

100-31-102-005-DH-0713.pdf

100-31-102-006-EH-0110.pdf


3



Vs=Vcc=5.0V

P=Input pressure(kPa･abs)

α β Pressure Error (kPa)

0.009 -0.095 2.5





Output span voltage

115kPa･abs

→Pressure(kPa･abs) 15kPa･abs

Offset voltage

4.7V

0.2V


100-31-102-005-DH-0713

100-31-102-005-DH-0713.pdf

Wir sind für Sie da. Adressen und Kontakte

Verkauf Österreich

Kurt StritzelbergerNeumarkter Str. 86aD-81673 München

Tel. + 49 89 260 38 47Mobil + 49 17 18 03 41 35Fax + 49 89 43 10 91 91

[email protected]


Verkauf Schweiz

PLZ 3000 – 9999Liechtenstein


Tel. + 41 44 877 35 18Mobil + 41 76 491 66 66Fax + 41 44 877 35 19

[email protected]

PLZ 1000 – 2999

Raffael FavarettoCh. des Vignes-d’Argent 2CH-1004 Lausanne

Tel. + 41 44 877 35 22Mobil + 41 76 444 63 14Fax + 41 44 877 35 23

[email protected]

PLZ 10000 –59999PLZ 80000 –99999

Kurt StritzelbergerNeumarkter Str. 86aD-81673 München

Tel. + 49 89 260 38 47Mobil + 49 171 803 41 35Fax + 49 89 43 10 91 91

[email protected]

Verkauf Deutschland

PLZ 60000 – 79999


Tel. + 49 719 149 60 58Mobil + 49 163 762 74 30Fax + 49 719 193 31 88

[email protected]



Tel. + 49 4488 5204 614Mobil + 49 173 9700 691Fax + 49 4488 5204 616

[email protected]

Stromversorgungen

DC-DC WandlerSchaltnetzgeräteDC-AC Inverter

Sebastiano LeggioTel. + 41 44 877 35 [email protected]

E-Komponenten

StromwandlerMensch-Maschine-SchnittstelleMesssonden

Sebastiano LeggioTel. + 41 44 877 35 [email protected]

Verkauf andere Länder / Product Management

PEWATRON AGThurgauerstrasse 66CH-8052 Zürich

Tel. + 41 44 877 35 00Fax + 41 44 877 35 25

[email protected]

Sensoren

Physikalische SensorenDatenerfassung

Peter FelderTel. + 41 44 877 35 [email protected]

Geometrische Sensoren

Eric LetschTel. + 41 44 877 35 14 [email protected]

100-31-102-005-DH-0713

Wettbewerbsfähige Sensoren und Stromversorgungen. Weltweit.

Zentrale Schweiz:Pewatron AG Thurgauerstrasse 66CH-8052 Zürich Telefon +41 44 877 35 [email protected]

Niederlassung Deutschland:Pewatron AG Edisonstraße 16 D-85716 UnterschleißheimTelefon +49 89 260 38 [email protected]

Vertrieb Österreich

Kurt StritzelbergerPewatron AG Edisonstraße 16D-85716 Unterschleißheim

Telefon + 49 89 260 52 80Mobil + 49 171 803 41 35

[email protected]

Vertrieb Schweiz & Liechtenstein

PLZ 3000 – 9999

Basil FreiPewatron AGThurgauerstrasse 66CH-8052 Zürich

Telefon + 41 44 877 35 18Mobil + 41 76 279 37 26

[email protected]

PLZ 1000 – 2999

Eric LetschPewatron AGThurgauerstrasse 66CH-8052 Zürich

Telefon + 41 44 877 35 14Mobil + 41 76 491 66 70

[email protected]

Vertrieb Key Accounts International

Peter FelderPewatron AG Thurgauerstrasse 66CH-8052 Zürich

Telefon + 41 44 877 35 05Mobil + 41 79 406 49 83

[email protected]

Vertrieb Deutschland

PLZ 00000 – 31999 PLZ 38000 – 39999PLZ 80000 – 99999

Kurt StritzelbergerPewatron AGEdisonstraße 16D-85716 Unterschleißheim

Telefon + 49 89 260 52 80Mobil + 49 171 803 41 35

[email protected]

PLZ 32000 – 37999PLZ 40000 – 79999

Gerhard Vetter Pewatron AGFürstenbergstraße 12D-55422 Bacharach-Medenscheid

Telefon + 49 674 394 75 75Mobil + 49 163 762 74 30

[email protected]

Gassensoren / GassensormoduleKraftsensoren

Thomas ClausenTelefon + 41 44 877 35 [email protected]

Stromversorgungen

Sebastiano LeggioTelefon + 41 44 877 35 [email protected]

AntriebstechnikCH PLZ 1000 – 4999 / AT / IT / FR

Christian MohrenstecherMobil +41 76 444 57 [email protected]

WegsensorenWinkelsensoren

Eric LetschTelefon + 41 44 877 35 14 [email protected]

Stromsensoren

Sebastiano LeggioTelefon + 41 44 877 35 [email protected]

Vertrieb weitere Länder / Produktmanagement

Drucksensoren

Philipp KistlerTelefon + 41 44 877 35 [email protected]

Beschleunigungssensoren

Eric LetschTelefon + 41 44 877 35 14 [email protected]

AntriebstechnikCH PLZ 5000 – 9999 / DE

Roman HomaMobil + 41 79 444 00 [email protected]

Wir sind für Sie da. Adressen und Kontakte.

Drucksensoren Datenblätter - Pewatron 100-32-102-015-EH-0110.pdf Sensing element H Gauge FGN...

Documents

Transcript of Drucksensoren Datenblätter - Pewatron 100-32-102-015-EH-0110.pdf Sensing element H Gauge FGN...