Dragon wire mesh welding machine
Transcript of Dragon wire mesh welding machine
河北龙筑贸易有限公司Hebei Dragon Construction Trading Co.,ltd
Tel: 0086-15230827668 Skype: hank.zhao3E-Mail:[email protected] Http:// www.asteelbuilding.com
☆ Automatic reinforcing mesh machine production line
Parameter
The product model:Full automatic reinforcing mesh product line IThe control system:CNCPower system:Electromagnetic brake motor
Characteristic:Both line wires and cross wires are per straighten, cut and fed automatic. The finished mesh is automaticstacking and packing. Cross wire hopper which can save one labor. Automatically arranging, catching,aligning and feeding line wires. Automatically outputting, dropping, stacking, aligning and packing finishedmesh. Different from ordinary reinforcing mesh welding equipment, the line wires and cross wires are fedautomatically. Automatic turning over, dropping and packaging mesh instead of manually lifting, placingand bunding mesh, which maximized save labor and greatly increase production.
河北龙筑贸易有限公司Hebei Dragon Construction Trading Co.,ltd
Tel: 0086-15230827668 Skype: hank.zhao3E-Mail:[email protected] Http:// www.asteelbuilding.com
GWC-2500A (3-8)wire diameter:3-8 丝径 number of electrodes:32
space of line wire:50-300 space of cross wire:50-300
rated electrical power:12*125KVA welding speed:0-110 times /min
width of mesh:2500mm/2100mm/1600mm/1200mm
overall dimention:20*5*2.3m rated voltage:380v
GWC-2500A (5-12)wire diameter:5-12 number of electrodes:24
space of line wire:50-300 space of cross wire:50-300
rated electrical power:12*125KVA
width of mesh:2500mm/2100mm/1600mm
overall dimention:20*5*2.3m rated voltage:380v
河北龙筑贸易有限公司Hebei Dragon Construction Trading Co.,ltd
Tel: 0086-15230827668 Skype: hank.zhao3E-Mail:[email protected] Http:// www.asteelbuilding.com
☆ Reinforcing Mesh Machine
Function features:
This kind machine is our latest developed reinforcing mesh welding machine. The line wire and the weft wire are pre-straight and pre-cut.The line wire is feeding by the servo motor ,pulling the wire net by the servo motor auto. The welding power comes from the spring. It’seasy to control the welding pressure . The weft wire feeding from the multi hopper which capacity is more over ten times than thetraditional hopper. The new machine added the bear wire net and carry equipment that makes the working more convenience . Thewelding part is used the springiness input wire trunking that makes the welding copper use for long time. This machine adoptssynchronous control technique. The cent-control and welding time are composed of PLC program system. The input front-panel is touchscreen , the operate is more intelligent and reasonable.
GWC-2500A (3-8)wire diameter:3-8 number of electrodes:24 or 48
space of line wire:50-300 space of cross wire:50-300
welding speed:0-60 times /min
width of mesh:3300mm/3000mm/2900mm/2500mm/2100mm
overall dimention:20*5*2.3m rated voltage:380v
河北龙筑贸易有限公司Hebei Dragon Construction Trading Co.,ltd
Tel: 0086-15230827668 Skype: hank.zhao3E-Mail:[email protected] Http:// www.asteelbuilding.com
GWC-2500D (5-12)wire diameter:5-12 number of electrodes:24
space of line wire:100-300 space of cross wire:100-300
welding speed:0-50 times /min rated voltage:380v
width of mesh:3300mm/3000mm/2900mm/2500mm
overall dimention:20*5*2.3m
河北龙筑贸易有限公司Hebei Dragon Construction Trading Co.,ltd
Tel: 0086-15230827668 Skype: hank.zhao3E-Mail:[email protected] Http:// www.asteelbuilding.com
☆ Automatic Mine Timbering Mesh Welding Machine
Parameter
The product model:Full automatic reinforcing mesh product line IIThe control system:CNCPower system:Electromagnetic brake motor
Characteristic:Both line wire coils and cross wire coils are automatically straighten, cut and fed. The finished mesh is alsoautomatically stacked. Line wires are automatically straightening, storage and feeding. Cross wires areautomatically straightening, storage and feeding. CNC setting meshes length, turning over, dropping,stacking, aligning and packaging. Compared with ordinary reinforcing mesh welding equipment, both linewires and cross wires are fed with coils. Automatically turning over, dropping and packaging mesh insteadof artificial lifting, placing and bunding mesh which maximized save labor and greatly increasedproduction.
河北龙筑贸易有限公司Hebei Dragon Construction Trading Co.,ltd
Tel: 0086-15230827668 Skype: hank.zhao3E-Mail:[email protected] Http:// www.asteelbuilding.com
The main parameterWire diameter 4-8mm Line wire form Coil
Line wire distance 50-200mm Cross wire form Coil
Cross wire distance 50-200mm Rated voltage 380v
Wire mesh width 1600mm Rated capacity
Welding speed 0-80 times/min Dimension 3100*40000*3000mm
Electrode number 16 or 32 Wire meshlength
6000mm
The finished mesh( in panels)
河北龙筑贸易有限公司Hebei Dragon Construction Trading Co.,ltd
Tel: 0086-15230827668 Skype: hank.zhao3E-Mail:[email protected] Http:// www.asteelbuilding.com
☆ Welded mesh machine
Function Features:
The machine adopts electrical and electronic syschronous control technique both welding time and cent-control welding is composedof digital and integrated electric circuit. This operation is accurate, it has stable function, firm welded point and without welded tracks.Not only welding speed is fast but also it is easy to learn and operate. The machine is equipped with precise equipment for weftcutting(that won the nation patent ZL02208722.2) and position(that won the nation patent ZL02208721.4), so the length of wefts isidentical and regular, it is unnecessary to slice the side, mesh panel drawing system adopts elastic tension link(that met the nation patentZL200520024380.9) and mesh opening positioning device, it is easy to regulate mesh hole and mesh opening size is rather accurate,welding aperture could adjust randomly within certain range.
河北龙筑贸易有限公司Hebei Dragon Construction Trading Co.,ltd
Tel: 0086-15230827668 Skype: hank.zhao3E-Mail:[email protected] Http:// www.asteelbuilding.com
The main parameterWire diameter 3-6mm feeding of line
wirecoil
space of wire 50*50-300*300mm feeding of crosswire
Pre-straightened and cut
width of mesh 3000mm/2500mm/2100mm/1600mm/1200mm
welding speed 0-60times /min rated electricalpower
number ofelectrodes
48 machine weight 4.5T
The finished products (in panels or in rolls)
河北龙筑贸易有限公司Hebei Dragon Construction Trading Co.,ltd
Tel: 0086-15230827668 Skype: hank.zhao3E-Mail:[email protected] Http:// www.asteelbuilding.com
☆ Automatic fence mesh welding machine
Function features: motor drive
This machine adopts synchronous control technique. The cent-control and welding time are composed of PLC program system . Theinput front-panel has two forms, touch screen and keyboard that makes the machine more intelligent and reasonable and it could press atone time, times welding . Welding by electromotor ; the hopper adopts the steeping motor; brake motor wheels ;pulling the wire net is
河北龙筑贸易有限公司Hebei Dragon Construction Trading Co.,ltd
Tel: 0086-15230827668 Skype: hank.zhao3E-Mail:[email protected] Http:// www.asteelbuilding.com
controlled by the steeping motor . The line wire and the weft wire are pre-straight and pre-cut . The greatest advantage is you can adjustthe distance of weft wire at random on the same one piece wire mesh sheet.
The main parameter
Wire diameter 3-6mm Rated voltage 380v
Weldingaperture
50*50-300*300mm Rated electricalpower
Width of mesh 3000mm/2500mm/2100mm/1600mm/1200mm
Number ofelectrodes
48 Machine weight 4.2T
Welding speed 0-60 times/min Overalldimension
6*3.2*1.8m
The finished products (in panels)
河北龙筑贸易有限公司Hebei Dragon Construction Trading Co.,ltd
Tel: 0086-15230827668 Skype: hank.zhao3E-Mail:[email protected] Http:// www.asteelbuilding.com
☆ Brick Force Mesh Machine
Function features:
This machine adopts synchronous control technique,both the welding time and cent-control weling is composed ofdigital and integrated electric
circuit.this operation is accurate,it has atable fucntion,firm welded point and without welded tracks.not only welding speed is fast but also it is
easy to learn and operate.the step motor controls fallen wefts structure and drawing material are automatic(this technology has won the nationa
patent ZL200520024381.3 so it is even and accurate,the edge of msh is regular,it is unnecesary to slice the side.drawing mesh adopts the device
with the elastic tension link(which met the national patent ZL200520024380.9)and fxing the mash,it is easy to regulate mesh hole and mesh se is
rather accurate,welding sperture could also adjust randomly within the range.it is automatic to make meshin pieces and in rolls.
The main parameterWire diameter 1.6-2.5mm Rated voltage 380v
Space of crosswire
65mm、115mm、
165mmSpace of line wires 250-300mm
Rated electricalpower
2*56KVA Number ofelectrodes
8 OR 6
Overalldimension
6*1.5*1.5 Welding speed 0-30
河北龙筑贸易有限公司Hebei Dragon Construction Trading Co.,ltd
Tel: 0086-15230827668 Skype: hank.zhao3E-Mail:[email protected] Http:// www.asteelbuilding.com
The finished products (in rolls)
河北龙筑贸易有限公司Hebei Dragon Construction Trading Co.,ltd
Tel: 0086-15230827668 Skype: hank.zhao3E-Mail:[email protected] Http:// www.asteelbuilding.com
☆ Mine Timbering MeshWelding Machine
Function Features:
It adopts synchronous control technology. The welding time and free running welding are controlled by PLC numerical programmablesystem. The input panel falls into two types, touch screen or keyboard, which makes the opearation more reasonable and moreintelligentizing. The welding is drived by pneumatic system, which makes the adusting of the welding pressure simple and convinent.The transversal wire feeding system is with hopper type drived by step motor. Both the mesh pulling system and longitudinal wirefeeding system are controlled by step motor. It is special for mine timbering mesh and the mesh opening size can be adjustable withincertain scope.
GWC-2500(3-8)Wire diameter 3-8mm Line wire form Pre-cut wire
Line wire distance 50-300 Cross wire form Pre- cut wire
Cross wiredistance
50-300 Rated voltage 380v 50Hz
Wire mesh width 2500mm
Welding speed 0-50times/min Dimension 3100*40000*3000mm
Electrode number 24 or 48 Wire mesh length 6000mm
河北龙筑贸易有限公司Hebei Dragon Construction Trading Co.,ltd
Tel: 0086-15230827668 Skype: hank.zhao3E-Mail:[email protected] Http:// www.asteelbuilding.com
The finished products (in panel)
河北龙筑贸易有限公司Hebei Dragon Construction Trading Co.,ltd
Tel: 0086-15230827668 Skype: hank.zhao3E-Mail:[email protected] Http:// www.asteelbuilding.com
☆ Wire mesh welding machine
Function Characteristics ----motor power
1.This machine adopts electrical & electronic synchronous control technique both separate-phase welding and welding time is composedof digital and integrated electric circuit. This opeartion is accurate,it has stable function ,firm welded point and without welded tracks.
2.The cross and line wires are fed from coils.
3.This machine is equipped with precise equipment for weft cutting (that won the nation patent ZL2208722.2)and position (that won thenation patent AL02208721.4),so the length of wefts is identical and regular,it is unnecessary to slice the side.
4.Mesh pulling system adopts elastic tension link(that won the nation patent ZL200520024380.9)and opening positioning mesh,it is easyto regulate the mesh hole and mesh opening size is rather accurate,welding aperture could adjust randomly with range. Not only weldingspeed is fast but also it is easy to learn and operate.Only two men can finish the operation.
5.The finished products can be in coil or in panel.
河北龙筑贸易有限公司Hebei Dragon Construction Trading Co.,ltd
Tel: 0086-15230827668 Skype: hank.zhao3E-Mail:[email protected] Http:// www.asteelbuilding.com
The main parameterwire diameter 1.5-2.4mm Rated voltage 380v
Welding aperture 50*50-150*150 Rated electricalpower
56KVA*2
Width of mesh 1200mm Overalldimension
2.5*2.5*1.5m
Number ofelectrodes
25 Machine weight 2.8T
Welding speed 0-80 times/min
The finished mesh( in panels )
河北龙筑贸易有限公司Hebei Dragon Construction Trading Co.,ltd
Tel: 0086-15230827668 Skype: hank.zhao3E-Mail:[email protected] Http:// www.asteelbuilding.com
☆ Animal Cages Welding Machine
The main parameterWire diameter 2.2-3mm Rated voltage 380v
Welding aperture 50*50-200*200 Rated electricalpower
Customized
Width of mesh 1200mm/1600mm
Number ofelectrodes
Customized Machine weight 3.2T
Welding speed 0-60 times/min Overalldimension
1.8*2.5*1.8m
河北龙筑贸易有限公司Hebei Dragon Construction Trading Co.,ltd
Tel: 0086-15230827668 Skype: hank.zhao3E-Mail:[email protected] Http:// www.asteelbuilding.com
The finished mesh
河北龙筑贸易有限公司Hebei Dragon Construction Trading Co.,ltd
Tel: 0086-15230827668 Skype: hank.zhao3E-Mail:[email protected] Http:// www.asteelbuilding.com
☆ Precise cutting machine
The main parameter
Model specification
Mesh cutting/shearing machine Precise cutting machine
width 2600mm/2100mm/1600mm/1300mm
Wire diameter 2-5mm
Motor power 7.5KW
Weight 3.3T
Dimension 2600*1000*1500mm
application Construction wire mesh machine
河北龙筑贸易有限公司Hebei Dragon Construction Trading Co.,ltd
Tel: 0086-15230827668 Skype: hank.zhao3E-Mail:[email protected] Http:// www.asteelbuilding.com
☆ Mesh rolling machine
The main parameter
Model Parameter
Width 2500mm/2100mm
Wire diameter 3-6mm
Mesh coil length <=50m
dimension 2500*1500*1300
application Building mesh welding machine
河北龙筑贸易有限公司Hebei Dragon Construction Trading Co.,ltd
Tel: 0086-15230827668 Skype: hank.zhao3E-Mail:[email protected] Http:// www.asteelbuilding.com
☆ Automatic mesh rolling machine
Parameter
The product model:Mesh rolling machineThe control system:The control panel (button)Power system:Motor
Characteristic:Mesh rolling machine is used to roll the finished mesh to coils,which is convenient for transformation andstock.Main features of standard mesh rolling machine:simple structure,easy to operate ,unloading meshmanually after finishing the mesh coil. Main features of automatic mesh rolling and loading machine: It’sequipped with sensor.The rolling speed is automatically adjusted according to the welding speed,and it couldalways keep the wire mesh fasten; Unloading mesh coil automatic after finished the rolling mesh,reduce thelabor intensity
河北龙筑贸易有限公司Hebei Dragon Construction Trading Co.,ltd
Tel: 0086-15230827668 Skype: hank.zhao3E-Mail:[email protected] Http:// www.asteelbuilding.com
The main parameter
Model Parameter
Wire diameter 3-6mm
Width 2500mm
Internal mesh coil diameter 350mm
External mesh coil diameter 350-1000mm
Max.weight 800kg
Max, mesh coil length 50meters
☆ Ordinary wire straightening and cutting machine
河北龙筑贸易有限公司Hebei Dragon Construction Trading Co.,ltd
Tel: 0086-15230827668 Skype: hank.zhao3E-Mail:[email protected] Http:// www.asteelbuilding.com
The main parameter
Wire
straightening and cutting machine(3-6)
Model JY 3-6/3-8/2-4
Power 380V 50hz
Wire diameter 3-6mm/3-8mm/2-4mm
Straightening motor 1.5KW
Cutting motor 0.75KW
Max. Length 1m-3m-6m
Weight About 160kgs
Speed 30M/min
河北龙筑贸易有限公司Hebei Dragon Construction Trading Co.,ltd
Tel: 0086-15230827668 Skype: hank.zhao3E-Mail:[email protected] Http:// www.asteelbuilding.com
ParameterThe product model:Wire straightening and cutting machineThe control system:The control panel (button)Power system:Electromagnetic brake motor
Characteristic:
Function Feature: Wire straightening and cutting machine is used to straightening and cutting cold /hotrolling bar into rod wires.Main features: cutting fixed length straightening wires adopt pneumatic clutchcontrol system,higher cutting speed,less scratch.The machine operation is simple,convenient and quick topadjust size.
The main parameter:Diameter 3-6mm
Length 0.8-12m
Speed 90-110m/min
Size(L× W× H) 7.6m×1.1m×1m
河北龙筑贸易有限公司Hebei Dragon Construction Trading Co.,ltd
Tel: 0086-15230827668 Skype: hank.zhao3E-Mail:[email protected] Http:// www.asteelbuilding.com
☆ Wire straightening and cutting machine (5-12)
The main parameter:Diameter 5-12mm
Length 0.8-12m
Speed 90-130m/min
Size(L× W× H) 7.6m×1.1m×1m
NOTE: Those machines’ parameter is our standard machine, if you have other requirement, tell usplease. Our technology department will design for you.