Dpa Upscale en 030809

8/3/2019 Dpa Upscale en 030809

1/8

D PA U P S C A L ETHE MULTI-MASTER TECHNOLOGY


2/8

D PA U P S C A L ET M

T H E N E W A P P R O AC H TO P R OT E C T I N G

C R I T I C A L A P P L I C AT I O N S A N D T H E

E N V I R O N M E N T

The three major concerns o IT and acility managers when assessing the

lie-cycle cost o their power protection inrastructure are availability, ex-

ibility and total cost o ownership (TCO). Thanks to many years o expe-

rience and leadership in designing modular power protection solutions,

Newaves newest three-phase UPS solution DPA UPScale simultane-

ously addresses all three concerns. The DPA UPScale design is based on

Newaves unique and proven Decentralized Parallel Architecture (DPA)

that has been developed specifcally to respond to stringent lie-cycle cost

requirements with the lowest environmental impact.

DPA Maximum availabilityParallel architecture limited only to modular design does not guarantee

the highest power protection or critical applications. The success o a

parallel modular system depends largely on the design o the parallel

architecture and on the level o intelligence o the individual modules.

Modular systems based on DPA as opposed to Centralized Parallel

Architectures (CPA) are ree o single points o ailure and maximise

system uptime.

Newaves modular DPA UPScale is built o sel-contained modules that

include the entire UPS hardware and sotware ; hence, it eliminates all

the common parts which are potential single points o ailure. A DPA

module includes distributed CPUs, distributed control panels, distributedpower units and distributed static bypass switches. Even the batteries are

separately confgured or each module, which makes the parallel system

ully and truly redundant.

The DPA parallel technology is based on the Multi-Master Technology

and the Majority Decision-Making Principle. The Multi-Master Tech-

nology minimises the cross-currents between the modules and ensures

equal load-sharing o the individual modules at all times. In the unlikely

event o a master module ault, the next module will become master

and the system will continue to share the load perectly. In the case o

an external event such as a shor t circuit or a mains ailure, the Majority

Decision-Making Principle comes into operation. Every individual module

will detect the event and then decide which source (inverter, mains or

2


3/8

battery) is the saest. Based on the majority decision o the modules, the

correct action is taken. The optimum parallel UPS solution is only possible

with systems that provide a Multi-Master Architecture and are based on the

Majority Decision-Making Pr inciple, such as the DPA rom Newave.

DPA High level o exibilityCritical applications continuously change their power requirements, which

oten increase with time. Managing those changes is a challenge or UPS man-

uacturers when designing a truly scalable UPS where modules can be added

without transerring the load to unreliable raw mains. UPS systems based on

DPA allow or incremental expansions whilst ensuring redundancy at all

times. DPA permits the inrastructure size to be scaled

to align with present IT requirements. It is pos-

sible to star t with just a ew modules and add to

them as required in an easy and sae way.

True sae-swap and sae-scale modularity

enables the sae replacement or insertion o

UPS modules into the UPS system without

the need to transer the critical load onto

raw mains or to remove power rom the

critical load. The ability to sae-swap modules

signifcantly reduces the systems mean timeto repair (MTTR) and simplifes system

upgrades. Thanks to the unique compact

design and low weight (10 kW = 18.6 kg, 20

kW = 21.5 kg) o the DPA UPScale modules,

inserting additional modules or replacing

existing ones during operation is easy and

can be per ormed by a single technician.

DPA Lowest total cost o ownershipSaving costs and optimising capital deployment are top priorities, and IT

acility managers must make eective investments to increase the efciency

o their IT systems. An inras tructure that uses cost-eective and exible

modular power protection solutions with signifcantly lower operating costs

will create competitive advantages in the medium term. The DPA UPScale

oers the lowest cost o ownership o any UPS system by oering energy

efciency, scalable exibility and highest availability due to true redundancy

and easy serviceability.

3


4/8

S M A R T C U S T O M I S AT I O N W I T H T W O

D I F F E R E N T D E S I G N S O L U T I O N S :

S TA N D A R D & R A C K - I N D E P E N D E N T

In order to satisy a wide r ange o application needs, the DPA UPScale

has been designed in two versions:

DPA UPScale ST (Standard) or applications that require a stan-

dard power protection solution including rame, UPS , battery and

communication

DPA UPScale RI (Rack-Independent) including UPS, bat tery and

communication which can be integrated into any 19 rack in indus-

trial, telecom or other applications

The main eatures o the DPA UPScale ST and RI:

Intelligent, sel-contained modules

Modules o low weight (10kW = 18.6kg; 20kW = 21.5kg)

Total compatibility with any installation (irrespective o PF)

Excellent input perormance

PF > 0.99

THDi < 3%

AC-AC Efciency 95.5%

Transormerless

Online double conversion technology

DPA UPScale ST: the compact all-rounderDesigned or high-density computing environments, the DPA UPScale STdelivers power protection rom 10 kW to 120 kW (1 to 6 modules) in a

single industry-standard 19 rame. The powerul confguration oers a

solution with maximum power density o 272 kW/m2. Its exible design

provides a pay as you grow model, ideal in situations where require-

ments change quickly and unpredictably. The DPA UPScale enables cost

reduction through the best-in-class efciency perormance, ast and

efcient implementation and extremely low overall operating costs.

The DPA UPScale ST is specially designed or space-saving exibility.

Space limitations are oten a challenge, especially in areas where the real

estate prices are very high. Consequently, the small ootprint may be a

major decision-making criterion when it comes to choosing the appro-

priate power protection system.

System architecture with the DPA UPScale STThe DPA UPScale ST can be deployed in a variety o system architectures

to support the specifc requirements o your IT inrastructure. The ST 40

and ST 60 types are suitable or applications with low run-times, limited

space and no exten-

sion requirements.

For larger autonomies

and incremental uture

growth, ST 80 and ST

120 are the best choice.

4


5/8


6/8

100% de carga75%50%25%

100% Load75%50%25%

100% Load75%50%25%

W H E N YO U T H I N K E N E R G Y A N D

E N V I R O N M E N T, T H I N K N E W AV E

Environmentally riendly power protectionNewave has led the way to sustainable power protection rom the

outset. Our power protection solutions help IT proessionals execute

a comprehensive energy-efcient strategy, drive more per ormance

in a smaller energy ootprint and enable them to add new capacity to

existing acilities while holding the line on power consumption.

Energy - Highly efcient and accurately sized UPSsystems save energy costsDPA UPScale generates a near unity input power actor at par tial

and ull load and reduces the required size o the input cable and

uses, thereby reducing the materials (and costs) a ssociated with the

systems electrical installation.

Class leading input current total harmonic distortion (THDi) o


7/8


8/8

Reerences

Newave Group Companies

Subsidiaries

Head Oice: Operations, Sales & Marketing

Newave Cer tiications & Recognitions

ABBAcerAEG SVSAmerican British RacingAmerican ExpressAnsar AlmojahedinARGE NSAXA InsuranceBank Renaissance MoscowBank Vontobel AGBarclays BankBasijian InstituteBasler VersicherungBBC (British Broadcasting Corp.)BelgorodenergoBetty BarclayBlaupunktBLS Ltschbergbahn AGBNFL (British Nuclear Fuels Ltd.)Boehringer IngelheimBritish Airport Authority (BAA)British CouncilBritish TelecomBrgerspital St. GallenCable and WirelessCambridge UniversityCaterpillarCentral Bank o Russian FederationCepsaCoca ColaCore TelecomCorreos de EspaaCredit SuisseDachserDaimler AGDanossDeutsche PostDNAEADSEDEKAEDP (Electricity o Portugal)ElisaEno

EterraEtisalatFujitsuGestamp CorporationGlaxo Smith KlineHenkelHiltonHoneywellHSBCHyattIBERIAIBMIntelInterouteIran InsuranceIran Telecom (TCI)IXEurope (Switzerland) AGKaraarin Bank

LekkerlandLloyds TSBLonza AGLUKOILManor AGMehilinenMeridienMeteorological OfceMetropolitano de LisboaMigros OstschweizMobile TeleSystems (MTS)

MobistarMotorolaNATs (National Air Trafc control)NestlNokian RenkaatNovartis Consumer Health SchweizAGNufeld HospitalsO2Oc (Schweiz) AGOlviOracle CorporationOSCE KosovaOsuuspankkikeskusOutokumpuOxord UniversityPaulanerPortugal TelecomProcter & GambleRabo BankRadio Televisin EspaolaREFER (Protuguese Railways)REPSOL-YPFRittalRitzRohde & SchwarzRolex SAROS TelecomRoshals medical clinicRoyal Bank o ScotlandRoyal ScandinaviaRussian RailwaysSampo PankkiSchiphol AirportSchweiz. Bundesbahnen SBBScottish PowerSheratonSiemens Schweiz AGSoudronic AGStora EnsoStudienzentrum GerzenseeSwiss RailwaySwiss Reinsurance

T-mobileTechnionTechnische BetriebeTedjarat BankTelekurs Services AGTescoThalesTiebauamt NidwaldenTool-TempUnifed Energy System o RussiaUnited Bank o Switzerland (UBS)UPM-KymmeneWaitroseVAPOVeikkausWilliamsWinterthur-Assurance p.a. wincasaVneshtorgbank

Vnukovo Airport MoscowVodaoneWolseleyvon Moos Stahl AGVR-RataZiegler Papier AGZurichZrcher Kantonalbank

Newave SA

Via Luserte Sud 9CH-6572 QuartinoSwitzerland

Tel. +41 91 850 29 29

Fax +41 91 840 12 [email protected]

www.newaveups.com

Austria

Newave sterreich GmbH

Ungargasse 36A-1030 Wiensterreich

Tel. +43 (1) 710 96 70 16

Fax +43 (1) 710 96 70 [email protected]

www.newaveups.at

Brazil

Newave South America LTDA

Rua Clodomiro Amazonas No. 1422

Suite 68BR-04537-002 - So Paulo

Tel. +55 11 3045 0809

Fax +55 11 3045 [email protected]

www.newaveups.com

Finland

Newave Finland OY

Niittlyntie 5 (postal)

Lkkisepnkuja 6 (visiting)FIN-00620 Helsinki

Tel. +358 9 751 46 100

Fax +358 9 751 46 [email protected]

www.newaveups.f

Germany

Newave USV Systeme GmbH

Summerside Ave. C 207

Baden AirparkD-77386 Rheinmnster

Tel. +49 7229 1866-0

Fax +49 7229 [email protected]

www.newave-usv.de

Hong Kong & China

Newave Energy Hong Kong ltd

Room 2506, West Tower, Shun TakCentre

HK-168-200 Connaught Road Central

Tel. +31642215512

[email protected]

with branch ofce in China:

Newave Energy (Jiangmen) Limited9/F Kawa House, 49 Jiangshe Road,

Jiangmen, GuangDong, China

Postal Code: 529000Tel. +86 750 3680239

Fax +86 750 3680229

ino @newave.cn.com

www.newave.com.cn

India

Newave Energy India Private Limited

102/103 Tanishka, Akurli Road,Near Big Bazar, Kandivali EastIN-400 101 Mumbai

Tel. +91 (22) 42179292

Fax +91 (22) [email protected]

www.newaveups.com

Italy

NEWAVE Italia

Via Vincenzo Ussani, 90

I-00151 RomaTel. +39 06 87451674

Fax. +39 06 39389924

[email protected]

Spain

Newave Espaa SA

Arturo Soria 329 1 D

ES-28033 Madrid

Tel. +34 (91) 768 22 22Fax +34 (91) 383 21 50

[email protected]

www.newave.es

Switzerland

ServiceNet AGIndustriestrasse 5

CH-5432 Neuenho

SwitzerlandTel. +41 56 416 01 01

Fax +41 56 416 01 00

[email protected]

www.servicenet.ch

with branch ofce in Biel:

Am Wald 36CH-2504 Biel

Switzerland

Tel. +41 32 366 60 30Fax +41 32 366 60 35

[email protected]

The Netherlands

Newave UPS Systems BV

Stephensonweg 9

NL-4207 HA GorinchemTel. +31 183 64 6474

Fax +31 183 62 3540

[email protected]

UPScaleVer.1/Eng.

05/09

Newave Energy Holding SAVia Luserte Sud 9CH-6572 QuartinoSwitzerland

Tel. +41 91 850 29 29Fax +41 91 840 12 54

[email protected]

Dpa Upscale en 030809

Documents

Transcript of Dpa Upscale en 030809