Download - Addinol Products Catalogue
-
Upload
aldoiu-iulian-andrei -
Category
Documents
-
view
742 -
download
5
Transcript of Download - Addinol Products Catalogue
Hochleistungs-SSchmierstoffe
High-PPerformance Lubricants
2
THE ART OF OIL • SINCE 1936
ADDINOLKompetenz seit 1936
Es begann 1936. Damals wurde in Krumpa dasMineralölwerk Lützkendorf gegründet. Es entstandeine der größten Raffinerieanlagen Deutschlandszur Herstellung von Kraft- und Schmierstoffen.
Forschung und Entwicklung wurden von Anfangan groß geschrieben. Bereits in den achtzigerJahren verfügte das Mineralölwerk Lützkendorfüber ein internationales Kompetenzzentrum inSachen Schmierstoffe.
Hochleistungs-Schmierstoffe des MineralölwerkesLützkendorf, wie das Motorenöl "ADDINOL Super",wurden zum Synonym für Qualität und Fortschritt.
ADDINOL - Additive in Oil - war eine der bekanntestenMarken der DDR. Nach der WiedervereinigungDeutschlands wurde ADDINOL zum Firmenna-men.
Die ADDINOL Lube Oil GmbH verlagerte im Jahr2000 den Sitz des Unternehmens nachLeuna/Sachsen-Anhalt. Hier entwickelt und pro-duziert ADDINOL Hochleistungs-Schmierstoffeder neuen Generation. Dazu gehören AutomotiveSchmierstoffe für höchste Anforderungen undbahnbrechende Entwicklungen für industrielleAnwendungen. ADDINOL Motoren- und Getriebe-öle sind von allen führenden Fahrzeugherstellernfreigegeben.Das Sortiment von ADDINOL beinhaltet über 450Schmierstoffe und kann somit für jede Anwendung,ob im automotiven oder industriellen Bereich, dasrichtige Produkt anbieten.Kunden in aller Welt profitieren von der stets gleichbleibend hohen Qualität der ADDINOL Hoch-leistungs-Schmierstoffe, unserem Know-how undder individuellen Beratung unserer kompetentenExperten.
3
THE ART OF OIL • SINCE 1936
ADDINOLCompetence since 1936
Everything started in 1936. In this year the mineraloil plant Lützkendorf was founded in Krumpa.One of the biggest refineries for the production offuel and lubricants in Germany developed.
Scientific research and development were highlyimportant from the very beginning. In the 1980sthe mineral oil plant Lützkendorf had alreadybecome an international competence centreregarding lubricants.High-performance lubricants of the mineral oilplant Lützkendorf, like the motor oil "ADDINOLSuper", became a synonym for quality andprogress.
ADDINOL - Additive in Oil - was one of the mostfamous brand names in the GDR. After theGerman Unification the name ADDINOL became thename of the company. In 2000 ADDINOL Lube Oil
GmbH moved its headquarters to Leuna.Here ADDINOL develops and produces high-performance lubricants of the new generationwhich include automotive lubricants for highestdemands as well as pioneering developments forindustrial applications. ADDINOL engine andtransmission oils are approved by all leadingmanufacturers of vehicles.
The product range of ADDINOL includes morethan 450 lubricants and thus offers the appropriateproduct for any use both in the industrial and theautomotive area.
Customers from all over the world profit fromthe high and stable quality of our ADDINOL high-performance lubricants, our know-how and theindividual customer advisory service from ourcompetent experts.
HOCHLEISTUNGS-SCHMIERSTOFFEHIGH-QUALITY LUBRICANTS
INHALTSVERZEICHNIS Table of Contents
4
THE ART OF OIL • SINCE 1936
Motorenöle - PKW, Motorräder, Kleingeräte / Engine oils - passenger cars, motorbikes, small machineries . . . . . . . . . .5Motorenöle - gemischter Fuhrpark / Engine oils - mixed fleeds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6Motorenöle - NFZ, stationäre Anlagen / Engine oils - commercial cars, stationary plants . . . . . . . . . . . . . . . . . . . . . . . .72T Motorenöle - Motorräder, Boote, Kleingeräte / 2 Stroke engine oils - Motorbikes, boats, small machineries . . . . . . . .8Universelle Traktorenöle / Universal Tractor oils . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9Gasmotorenöle / Gas engine oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10Marine und Schienenfahrzeuge / Marine and Railroad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11Kfz - Getriebeöle / Automotive gearbox and transmission oils . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11Automatikgetriebe - Fluids / Automatic Transmission Fluids . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12Elektroisolieröle / Transformer oils . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13Formentrennöle / Moulding Release Oils . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13Gleitbahnöle / Guideway Oils . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13Hochtemperaturschmierstoffe / High Temperatur Lubricants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14Hydraulikflüssigkeiten / Hydraulic fluids . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14Industrie - Getriebeöle / Industrial Gear Oils . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16Spezialgetriebeöle / Special gear oils . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16Kältemaschinenöl / Refrigerator oils . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17Kettenöle / Chain oils . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17Korossionsschutzöle / Corrosion Protection Oils . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18Lagerschmieröle / Bearing oils . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19Lebensmittel - und H1 - Produkte / Products for food industry and H1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20Maschinenöle / Luboils . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20Metallbearbeitungsöle - nicht-wassermischbar / Metal working oils - Non-miscible in water . . . . . . . . . . . . . . . . . . . . .21Metallbearbeitungsöle - wasser-mischbar / Metal working oils - Miscible in water . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22Schmierfette / Lubricating greases . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
• Universalfette / Universal greases . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24• Fließfette / Liquid greases . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25• Spezialfette / Special greases . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25• Schmierfette (NSF H1) / Lubricating Greases (NSF H1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27• Sonstige Schmierfette / Other lubricating greases . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28• Pasten / Pastes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Spezialprodukte / Special products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30Turbinenöle / Turbine oils . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31Umlauföle / Circulating oils . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31Umweltschonende Schmierstoffe / Environment-friendly Lubricants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32Vakuumpumpenöle / Vacuum pump oils . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32Verdichteröle / Compressor oils . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33Wärmeträgeröle / Heat transfer oils . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33Zylinderöle / Cylinder oils . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34Kfz - Funktionsflüssigkeiten / Automotive function fluids . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
MOTORENÖLE - PKW, MOTORRÄDER, KLEINGERÄTEENGINE OILS - PASSENGER CARS, MOTORBIKES,SMALL MACHINERIESADDINOL- ProduktADDINOL- Product
ProduktbeschreibungProduct description
Spezifikation/OEM-FreigabenSpecifikation/OEM-Approvals
SAE
5
THE ART OF OIL • SINCE 1936
Mega lightMV 039
0W-30 Vollsynthetisches Leichtlaufmotorenöl mit abgesenkterHTHS-Viskosität für alle Motoren der VW-Gruppe abModelljahr 2000 mit WIV, auch für Pumpe-Düse-MotorenFully-synthetic fuel-economy oil with decreased (HTHS)for engines of the VW-group from model year 2000 with"Long Life Service", also for pump-jet-engines
ACEA A5/B5VW 503 00/506 00/506 01
Extra lightMV 038
0W-30 Vollsynthetisches Leichtlauföl für Otto- undDieselmotoren, insbesondere für Dieselmotoren mitCommon Rail-EinspritztechnikFully-synthetic fuel-economy oil for diesel and gasolineengines, in particular for diesel engines with common-rail injection technology
ACEA A3/B3/B4API SL/CF, ECMB 229.3; BMW Longlife-98;VW 502 00/505 00/503 01;erfüllt / fulfills:GM-LL-A-025/B-025
Mega LightMV 0539 LE
5W-30 Synthetisches Leichtlauföl mit neuesterAdditivtechnologie (Low SAPS) für alle VW-Fahrzeugemit WIV Synthetic fuel-economy oil with the newest additivetechnology (low SAPS) for all Volkswagen-vehicles with"Long Life Service"
ACEA C3, A3/B4; VW 504 00/507 00;
Extra Power MV 0538 LE
5W-30 Synthetisches Leichtlauföl (Low SAPS) für die neuesteGeneration von Euro IV- Otto- und Dieselmotoren mitRußpartikelfilter und NOx - Speicherkatalysator Synthetic fuel-economy oil (low SAPS) for the newestgeneration of Euro IV-diesel and gasoline engines withcarbon-particulate filter and NOx memory catalyst
ACEA C3, A3/B3, A3/B4; API SL/CFVW 502 00/505 00;229.31; BMW Longlife-04
Super powerMV 0537
5W-30 Vollsynthetisches Leichtlauföl mit verlängerten Ölwech-selfristen für Pkw-, Otto- und Dieselmotoren neuesterBauart, kraftstoffsparendFully-synthetic fuel-economy oil with extended oilchange intervals for passenger cars with gasoline anddiesel engines of newest model, fuel-saving
ACEA A3/B3/B4; API SL/CF,SH/ECVW 502 00/505 00;MB 229.5;BMW Longlife-01;erfüllt / fulfills: GM-LL-B-025
Super powerMV 0537 FD
5W-30 Spezielles teilsynthetisches Leichtlauf-Motorenöl mitabgesenkter HTHS-Viskosität (<3,5mPas) für modi-fizierte Ford-MotorenSpecial semi-synthetic fuel-economy oil Engine oil withdecreased HTHS-viscosity (<3,5mPas) for modifiedFORD-Engines
ACEA A1/B1/A5; API SL/CF, Ilsac GF-2;FORD WSS-M2C 913-B, FORD WSS-M2C 913-A
LightMV 0546 PD
5W-40 Teilsynthetisches Leichtlauföl für Otto- undDieselmotoren, insbesondere für Turbo-Dieselmotorenmit Pumpe-Düse-TechnikSemi-synthetic fuel-economy oil for gasoline and dieselengines, in particularly for turbo-diesel engines withpump/jet-injection
ACEA A3/B3; API SL/CF,SH/EC; VW 505 01/500 00/505 00;MB 229.1 erfüllt / fulfills:BMW, Porsche;Ford WSS-M2C 917-A
Ultra lightMV 046
0W-40 Vollsynthetisches, kraftstoffsparendesLeichtlaufmotorenöl für modernste Pkw- Otto- undDieselmotoren.Fully-synthetic, fuel-saving fuel-economy oil for moderngasoline and diesel passenger car engines
ACEA A3/B3/B4API SL/CF, ECVW 502 00/505 00;erfüllt / fulfills: MB 229.3;BMW Longlife-98; GM-LL-B-025
Super lightMV 0546
5W-40 Synthetisches Leichtlauf-Motorenöl für Pkw-Otto- undDieselmotoren, kraftstoffsparendSynthetic fuel-economy oil for gasoline and dieselpassenger car engines, fuel-saving
ACEA A3/B3/B4;API SL/CF, EC; VW 502 00/505 00; MB 229.3;BMW Longlife-98; Porsche;erfüllt / fulfills: GM-LL-B-025
MOTORENÖLE - PKW, MOTORRÄDER, KLEINGERÄTEENGINE OILS - PASSENGER CARS, MOTORBIKES,SMALL MACHINERIES
ADDINOL- ProduktADDINOL- Product
ProduktbeschreibungProduct description
Spezifikation/OEM-FreigabenSpecifikation/OEM-Approvals
SAE
6
THE ART OF OIL • SINCE 1936
Super viscoMV 0556
5W-50 Vollsynthetisches Leichtlauföl für moderne Pkw und 4-Takt- MotorräderFully-synthetic fuel-economy oil for modern passengercars and 4-stroke motorbikes
ACEA A3/B3/B4; API SL/CF;
erfüllt / fulfills: BMW, MB, VW 500 00/505 00
SuperMV 1045MV 1545
10W-4015W-40
Mehrbereichsmotorenöle für den Ganzjahreseinsatz inKfz.Multigrade engine oils for complete yearly operation inpassenger cars
API SG/CD
Biker´s Touring4T4T-50
10W-4010W-50
Teilsynthetische Hochleistungsmotorenöle fürMotorräder mit 4T-Motoren im Touringbetrieb - auf allenStraßen und im GeländeSemi-synthetic high-performance engine oils for anykind of motorbikes with 4-stroke engines in touringcondition - on any roads and off-road
ACEA A3API SHJASO MA
Super viscoMV 1066
10W-60 Synthetisches Leichtlauf-Motorenöl für Pkw undMotorräderSynthetic fuel-economy oil for motorbikes andpassenger cars
ACEA A3/B3; API SJ/CF;JASO MA
Super driveMV 1546MV 1556
15W-40 15W-50
Motorenöle für alle Pkw- Otto- und Dieselmotoren,besonders für moderne Einspritz- und TurbomotorenEngine oils for any passenger and diesel engines, inparticular for modern injection and turbo engines
ACEA A3/B3; API SL/CF MV 1546:VW 501 01/505 00; MB 229.1
RasenmäherölLawn Mover OilMV 304MV 1034
30 10W-30
Motorenöle für luftgekühlte Viertakt-Otto-Motoren in mobilenKleingeräten, insbesondere für Rasenmäher geeignetEngine oils for air-cooled four-stroke combustion engines inmobile small machinery, in particular suitable for lawnmowers
API SF/CC
MotorenölEngine OilM 30M 50
3050
Einbereichs-Motorenöle für Benzin- und Dieselmotorenspeziell für 4-Takt-Oldtimer- und KräderMonograde engine oils for combustion enginesspecially for 4-stroke Oldtimer and motorbikes
API SA/CA
Semi synthMV 1047
10W-40 Teilsynthetisches Leichtlauf-Motorenöl für Pkw- undTransporter-HochleistungsmotorenSemi-synthetic fuel-economy oil for passenger car andtransporter high-performance engines
ACEA A3/B3; API SL/CF,SH/EC;VW 500 00/505 00; MB 229.1;BMW Spezialöl / BMW Special oil
MOTORENÖLE - GEMISCHTER FUHRPARKENGINE OILS - MIXED FLEEDS
ADDINOL- ProduktADDINOL- Product
ProduktbeschreibungProduct description
Spezifikation/OEM-FreigabenSpecifikation /OEM-Approvals
SAE
Premium StarMX 1048
10W-40 SHPD-Leichtlauf-Motorenöl mit Longlifecharakter fürgemischte Fuhrparks - in Diesel- und OttomotorenSHPD-fuel-economy oil with longlife-characteristics formixed vehicle fleets - also for diesel and gasolinepassenger cars
ACEA A3/B3/B4/E3;API SJ/CG-4, SH/ECMB 229.1/228.3; MAN 271; VW 500 00/505 00erfüllt / fulfills: Volvo VDS-2;MAN M 3275; Renault;Scania; DAF; Allison C4;Caterpillar TO-2; MACK EO-K/2, etc.
MOTORENÖLE - GEMISCHTER FUHRPARKENGINE OILS - MIXED FLEEDS
ADDINOL- ProduktADDINOL- Product
ProduktbeschreibungProduct description
Spezifikation/OEM-FreigabenSpecifikation/OEM-Approvals
SAE
7
THE ART OF OIL • SINCE 1936
MOTORENÖLE - NFZ, STATIONÄRE ANLAGENENGINE OILS - COMMERCIAL CARS, STATIONARY PLANTS
ADDINOL- ProduktADDINOL- Product
ProduktbeschreibungProduct description
Spezifikation/OEM-FreigabenSpecifikation/OEM-Approvals
SAE
Super StarMX 1547
15W-40 Motorenöl für gemischte Fuhrparks, auch fürerschwerte Betriebsbedingungen (SHPDO).Engine oil for mixed vehicle fleets, also for heavyoperation conditions (SHPDO)
ACEA A3/B3/E2; API SJ/CG-4/CF-4;MB 228.1/ 229.1; MAN 271; VW 501 01/505 00;MTU Öltyp 1ZF TE-ML 04C, 07C
Super StarMX 1557MX 2057
15W-5020W-50
Hochleistungs-Motorenöle für alle Diesel- undOttomotoren mit hohen spezifischen Leistungen auchin gemischten FuhrparksHigh-performance engine oils for any cars with dieseland gasoline engines with high specific performancesalso in mixed vehicle fleets
ACEA A2/B2/E2; API SH/CF-4;erfüllt / fulfills:Caterpillar TO-2;MB 228.1/229.1; MAN 271;VW 501 00/505 00
Ultra TruckMD 0538
5W-30 Extra HPD- Öl (XHPDO) für Euro II- und III-Nutzfahrzeug- Motoren; für extrem verlängerteÖlwechselfristenExtra HPD-Oil (XHPDO) for Euro II and III in commercialengines, for extreme extended oil changing intervals
ACEA E4; API CF;MB 228.5; MAN M 3277; Renault RXD; Volvo VDS-2; MTU Ölkategorie 3erfüllt / fulfills:Renault; Scania; DAF
Extra Truck MD 1049 LE
10W-40 Hochleistungsmotorenöl der neuesten Generation fürEuro IV - Nutzfahrzeuge mit Abgas-Nachbehandlungs-systemenHigh performance engine oil for the newest generationof Euro IV - commercial vehicles with exhaust aftertreatmenttechnology
ACEA E6/E4MB 228.51, MB 228.5; MAN M3477, MAN M 3277 (CRT); Renault RVI RXDerfüllt / fulfills:MTU Ölkategorie 3; DAF"HP2"; Volvo VDS-3 (running);Scania; Fiat-Iveco u. a
Super TruckMD 1048
10W-40 UHPD - Leichtlauföl für extrem verlängerte Ölwechselin-tervalle (bei Mercedes-Benz bis zu 100.000 km imFernverkehr) für Euro II- und III- NutzfahrzeugmotorenUHPD-fuel-economy oil for extremely extended oilchanging intervals (e.g. Mercedes Benz: up to 100000 kmin Long-distance traffic) for Euro II and III commercialvehicle engines
ACEA E4; API CF;MB 228.5; MAN M 3277; MTUÖlkategorie 3; Scania LDF;Volvo VDS-2; Renault RXD;
erfüllt / fulfills:Renault; DAF, etc.
Super LonglifeMD 1047
10W-40 Teilsynthetisches SHPD-Motorenöl für verlängerteÖlwechselfristen, hervorragend geeignet bei RME-Einsatz (Biodiesel, Angaben der Motorenherstellerbeachten)Semi-synthetic SHPD-engine oil for extended oilchanging intervals, excellent suitable with RME-operation (bio diesel, consider the data of the enginemanufacturer)
ACEA E7/E5/E3/B4/B3/A3; API CI-4/ CH-4/CG-4/CF-4/CF/SL;MB 228.3/229.3; MAN M 3275;Volvo VDS-3; MTU Ölkategorie 2;DDC Series 2000 & 4000,Renault RLD-2erfüllt / fulfills:Scania, DAF, Caterpillar TO-2,etc.
MOTORENÖLE - NFZ, STATIONÄRE ANLAGENENGINE OILS - COMMERCIAL CARS, STATIONARY PLANTS
ADDINOL- ProduktADDINOL- Product
ProduktbeschreibungProduct description
Spezifikation/OEM-FreigabenSpecifikation/OEM-Approvals
SAE
8
THE ART OF OIL • SINCE 1936
Diesel LonglifeMD 1548
15W-40 Heavy-Duty-Engine-Oil für schwere Nutzfahrzeuge,erfüllt die höchsten amerikanischen und europäischenSpezifikationen, Longlife-Charakter für sehr hoheÖlwechselfristen, erfüllt die Euro III EmissionsforderungHeavy-Duty-Engine-Oils for heavy commercial vehicles,fulfills the highest American and European specification,Longlife-character for very high oil changingintervals, fulfills the Euro III emission requirement
ACEA E7/E5/E3/B3/B4/A3;API CI-4/CH-4/CG-4/CF-4/SL;Global DHD-1;MB 228.3/229.1; MAN M 3275;Volvo VDS-3; MTU Ölkategorie 2;DDC Series 2000 & 4000,Renault RLD-2erfüllt / fulfills:VW 501 01/505 00; JDQ 78 A;Allison C4; Cummins CES 20071/72/76/77/78; Caterpillar TO-2 / ECF-1;Scania
Super DieselMD 1045MD 1545MD 2055
10W-4015W-4020W-50
Motorenöle für Kfz-Dieselmotoren mit hohenAnforderungenEngine oil for passenger diesel with high requirements
ACEA E3/B3; API CF-4/SG;erfüllt / fulfills:MB 228.3; MAN 271; VolvoVDS; Caterpillar TO-2; AllisonC4; Mack EO-K/2
Turbo DieselMD 407
40 Hochleistungs-Einbereichs-Motorenöl für mittel- undschnelllaufende Dieselmotoren, insbesondere fürschnelle Schiffe wie Fregatten, auch für stationärenBereichHigh performance-monograde engine oil for middleand high-speed diesel engines, in particular for fastships like frigates, also within stationary range
ACEA E3/E5; API CI-4; MTU Ölkategorie 2;DETROIT DIESEL BR 2000& 4000 (DDC)erfüllt / fulfills:Caterpillar; MACK EO-M Plus;Cummins; MB 228.2
Turbo DieselMD 105MD 205MD 305MD 405MD 505
10W20W-20
304050
Hochleistungs-Einbereichsmotorenöle fürDieselmotoren; darüber hinaus geeignet inHydraulikanlagenHigh performance-monograde engine oils for dieselengines, beyond that suitable in hydraulic plants
ACEA E2; API CF-4/SF MB 228.0; MAN 270;MTU-Ölkategorie 1MD 305: ZF TE-ML 02C, 04BMD 405: ZF TE-ML 02C, 04Berfüllt / fulfills:MACK EO-K/2, Caterpillar,TO-2
DieselMD 1034MD 304MD 404
10W-303040
Einbereichsmotorenöle für nicht aufgeladeneDieselmotorenMonograde engine oils for non charged diesel engines
API CC/SF
Super Bike Racing 2T Vollsynthetisches Hochleistungs-Zweitakt-Motorenöl speziell fürMotocross- selbstmischend, katalysatorgetestetFully-synthetic high-performance two-stroke engine oil- self-mixing, catalyst-tested
API TC+; JASO FC;ISO-L-EGDübertrifft Anforderungenführender 2-Takt-Motorradherstellerexceeds the requirements ofleading two-stroke-motorbikeproducers
2T MOTORENÖLE - MOTORRÄDER, BOOTE, KLEINGERÄTE2 STROKE ENGINE OILS - MOTORBIKES, BOATS, SMALL MACHINERIES
ADDINOL- ProduktADDINOL- Product
ProduktbeschreibungProduct description
Spezifikation/OEM-FreigabenSpecifikation/OEM-Approvals
2T MOTORENÖLE - MOTORRÄDER, BOOTE, KLEINGERÄTE2 STROKE ENGINE OILS - MOTORBIKES, BOATS, SMALL MACHINERIES
9
THE ART OF OIL • SINCE 1936
Super synth 2 TMZ 408
Vollsynthetisches Hochleistungs-Zweitakt Motorenöl- selbstmischend, katalysatorgetestet, biologisch abbaubarFully-synthetic high-performance two-stroke engine oil- self-mixing, catalyst-tested, biodegradable
API TC+ ; JASO FC; ISO-L-EGDerfüllt / fulfills: Stihl, Dolmar, Husqvarna
Biosynth 2 TMZ 407
Vollsynthetisches Hochleistungs-Zweitakt- Motorenöl, besondersgeeignet für Bootsmotoren- selbstmischend, katalysatorgetestet, biologisch abbaubarFully-synthetic high-performance two-stroke engine oil,particularly suitable for boat engines- self-mixing, catalyst-tested, biodegradable
NMMA TC-W 3API TD JASO FCISO-L-EGC
Super 2 TMZ 406
Teilsynthetisches Hochleistungs-Zweitakt- Motorenöl,Reduzierung der Rauchbildung "low smoke"- selbstmischend, katalysatorgeeignetSemi-synthetic high-performance two-stroke engine oil;Reduction of smoke formation "low smoke"- self-mixing, catalyst-tested
API TCJASO FC ISO-L-EGDerfüllt / fulfills:Husqvarna 266
Super mixMZ 405
Hochleistungs-Zweitakt-Motorenöl auf Mineralölbasis fürGemischschmierung und Frischölautomatik im Mischungsver-hältnis 1 : 50- selbstmischend, katalysatorgetestetHigh-performance two-stroke engine oil based on mineral oil formixed lubrication and automatic fresh oil systems at the mixingratio 1 : 50- self-mixing, catalyst-tested
API TC JASO FB ISO-L-EGBerfüllt / fulfills:Husqvarna 266
ADDINOL- ProduktADDINOL- Product
ProduktbeschreibungProduct description
Spezifikation/OEM-FreigabenSpecifikation/OEM-Approvals
UNIVERSELLE TRAKTORENÖLEUNIVERSAL TRACTOR OILS
ADDINOL- ProduktADDINOL- Product
ProduktbeschreibungProduct description
Spezifikation/OEM-FreigabenSpecifikation/OEM-Approvals
SAE
Super TraktorMU 1035MU 1045MU 1545
10W-30 10W-4015W-40
Traktorenöle (STOU) für Motoren,Getriebe, Hydrauliken, nassen Bremsenund LastschaltkupplungenTractor oils (STOU) for engines,transmissions, hydraulic systems, wetbrakes and power shift clutches
ACEA E2, API CF-4/SG; GL-4;HLPD/HVLP (DIN 51524 2/3)MU 1045: ZF TE-ML 06C u. 07Bentspricht / fulfills:MB 228.1/227.1; Massey Ferguson M1144/1139/1135; John Deere JDM 27;Ford M2C 159 C; Allison C-4; Caterpillar TO-2;MACK EO-K/2
UTTO
UTTO Extra
(80W)(10W-30)
(85W)(20W-40)
Traktorenöle für Getriebe, Hydrauliken,nassen Bremsen und Lastschalt-kupplungen. UTTO Extra bevorzugt fürschwere BetriebsbedingungenTractor oils for transmissions, hydraulicsystems, wet brakes and power shiftclutches. UTTO Extra is preferably appliedunder difficult operating conditions
API GL-4,HLPD/HVLP (DIN 51524, 2/3),ZF TE-ML 03E (UTTO SAE 10W-30)erfüllt / fulfills:John Deere JDM J 20 C; New Holland M2C 134D; Ford M2C 134 C/D, M2C 86 B/C; M2C 41 B,M2C 48 B, M2C 53 A; Massey Ferguson M 1141,M 1143; Allison C3/C4; IH
UNIVERSELLE TRAKTORENÖLEUNIVERSAL TRACTOR OILS
ADDINOL- ProduktADDINOL- Product
ProduktbeschreibungProduct description
Spezifikation/OEM-FreigabenSpecifikation/OEM-Approvals
SAE
10
THE ART OF OIL • SINCE 1936
Fluid TO-44 10W3050
Universal-Getriebe-Fluid, vorrangig einsetzbar inCaterpillar-Baumaschinen neuester GenerationUniversal transmission fluid, preferably suitable forapplication in Caterpillar construction machinesof last generation
ZF TE-ML 03C (TO-4 SAE 30)erfüllt / fulfills:Caterpillar TO-4; Allison C-4
Universal Fluid20W-40
20W-40 Öl für Baumaschinen (besonders in Volvo Hanomag-und Komatsu-Geräten), für Getriebe-Hydrauliksysteme,in Achsen mit nassen Bremsen und DifferentialsperrenOil for construction machines (particularly in Volvo,Hanomag and Komatsu devices) for the application intransmission-hydraulic systems, in axles with wetbrakes and differential locks
API GL-4erfüllt / fulfills:Volvo VME WB 101
GasmotorenölGas engine oil MG 40-Extra Plus
40 Spezielles Gasmotorenöl für Biogasbetrieb,Leistungsbereich von 50 bis 500 KWSpecial gas engine oil for fermentation gas,Performance range from 50 to 500 KW
MAN M 3271-2
GasmotorenölGas engine oil MG 40-Extra
40 Praxiserprobtes Spezialöl für kleine Blockheizkraftwerke(BHKW), insbesondere für modifizierte Diesel- undOttomotoren mit BiogasbetriebSpecial oil tested in practical applications produced forsmall block thermal power stations as used in the fieldof agriculture, in particular if equipped with modifieddiesel and gasoline engines operating with fermenta-tion gas
MAN M 3271-2
GasmotorenölGas engine oil MG 1540
15W-40 Mehrbereichsmotorenöl für erdgas- (CNG) und flüssig-gas (LPG)- betriebene Hochleistungsmotoren, praxiser-probt in Verkehrsbetrieben (Omnibusse)A multigrade engine oil for commercial vehicles operatingbased on compressed natural gas (CNG) and liquidpetroleum gas, for the application in transportationcompanies (motorbusses)
ACEA E2API CG-4MAN M 3271-1
GasmotorenölGas engine oil MG 4005MG 4008
4040
Mineralölbasische Gasmotorenöle (MG 4005aschearm); geeignet für 2-Takt- oder 4-Takt-Otto- undDieselmotoren und für aufgeladene Motoren mit undohne Katalysatorbetrieb; besonders geeignet für mitErdgas betriebene MotorenMG 4008: für den Dualfuel-Betrieb Erdgas-Diesel sowieBetrieb mit sauren Gasen geeignetLow-ash, mineral oil based oil for gas engines, suitablefor two- and four-stroke gasoline and diesel engines andfor charged engines with or without catalyst operation,particularly suitable for engines operating on petroleumbasisMG 4008: for dual-fuel operation natural gas-diesel and for the operation with acid gases
API CD
MG 4005 erfüllt/fulfills:MAN;Jenbacher;MWM Deutz;Caterpillar;Wärtsila
GASMOTORENÖLEGAS ENGINE OILS
ADDINOL- ProduktADDINOL- Product
ProduktbeschreibungProduct description
Spezifikation/OEM-FreigabenSpecifikation/OEM-Approvals
MARINE UND SCHIENENFAHRZEUGEMARINE AND RAILROAD
ADDINOL- ProduktADDINOL- Product
ProduktbeschreibungProduct description
SAE TBN
11
THE ART OF OIL • SINCE 1936
MarineMS 3011MS 4011MS 4012TMS 3015 TMS 4015 T
3040304040
1010121515
Motorenöle im Leistungsniveau API CD zur Schmierung von Tauchkolbendiesel-motoren und zur Zylinderschmierung von Kreuzkopfdieselmotoren beim Betrieb mitDK; MS 3011/MS 4011 sind auch einsetzbar im Kfz-Sektor und der EisenbahnEngine oils in the proficiency level API CD for lubrication of plunger diesel enginesand for lubrication of cross-head diesel engines while operating with diesel fuel,MS 4011/3011 also applicable for diesel engines in the car sector and of trains
MarineMS 3022 TMS 4022 TMS 3032 TMS 4032 TMS 4042 T
3040304040
2222323242
Motorenöle mit höherer Alkalität (TBN) zur Schmierung von Tauchkolbendiesel-motoren bei Schwerölbetrieb und zur Zylinderschmierung von Kreuzkopfdiesel-motoren beim Betrieb mit DK und Marine-Diesel-FuelEngine oils wiht higher alkality (TBN) for lubrication of plunger diesel engines inoperations with heavy oil and for cylinder lubrication of cross-head diesel engineswhile operating with diesel fuel
RailroadMS 4017 ZF MS 4011 ZF
4040
13,717
Zinkfreie Dieselmotorenöle des Leistungsniveaus API CD für Schienenfahrzeugeund stationäre Motoren, sehr gut für den Betrieb mit Hoch-Schwefel-KraftstoffgeeignetZinc free diesel engine oils in the proficiency level API CD for rail vehicles andstationary aggregates, particularly suitable for engines operating on high sulfur fuel
Turbo DieselMD 407
40 10 Hochleistungs-Einbereichs-Motorenöl für mittel- und schnelllaufendeDieselmotoren (u. a. für schnelle Schiffe mit hoher und geringer Auslastung)und im stationären BereichHigh performance-monograde engine oil for middle and high-speed dieselengines (also for fast ships with high and small extent of utilization) also withinstationary range
StrömungsgetriebeölHydrodynamic transmission oilSGL 18
Betriebsflüssigkeit für Strömungsgetriebe in Lokomotiven und stationärenAnlagenOperation fluid for hydrodynamic transmissions in locomotives and instationary systems,V40 = 32 mm2/s, Freigaben / Approvals: DB AG, MTU, Voith
GetriebeölTransmission oilGH 75 W 90GH 80 WGH 80 W 90 GH 85 W 90GH 80 W140 GH 85 W140
75W-9080W 80W-90 85W-90 80W-14085W-140
Kfz-Getriebeöle, insbesondere für Hypoidantriebe mitgroßem AchsversatzAutomotive gearbox and transmission oils, particularlyfor hypoid drives with large pinion offset
API GL-5;MB 235.0; MAN 342;MIL-L 2105 D;GH 75 W 90:erfüllt / fulfills: VW 501 50GH 85 W 90: ZF TE-ML 05A,07A, 12A, 16C, 17BGH 80 W 90: ZF TE-ML 05A,07A, 12A, 16B, 17B
KFZ-GETRIEBEÖLEAUTOMOTIVE GEARBOX AND TRANSMISSION OILS
ADDINOL- ProduktADDINOL- Product
ProduktbeschreibungProduct description
Spezifikation/OEM-FreigabenSpecifikation/OEM-Approvals
SAE
GetriebeölTransmission oilGH 85 W 90 LS GH 80 W 90 LS
85W-9080W-90
Kfz-Getriebeöle für Achsantriebe mit Sperrdifferential(Limited Slip)Automotive gearbox and transmission oils for axledrives with limited slip
API GL-5; MIL-L 2105 D;ZF TE-ML 05C, 12C, 16E
KFZ-GETRIEBEÖLEAUTOMOTIVE GEARBOX AND TRANSMISSION OILS
ADDINOL- ProduktADDINOL- Product
ProduktbeschreibungProduct description
Spezifikation/OEM-FreigabenSpecifikation/OEM-Approvals
SAE
12
THE ART OF OIL • SINCE 1936
GetriebeölTransmission oilGX 80 W 90
80W-90 Mehrzweckgetriebeöl, universell einsetzbar in synchro-nisierten und nicht synchronisierten Handschalt- sowieAchsantriebenMulti-purpose gearbox and transmission oil, universallyapplicable in synchronized and non-synchronizedmanual switch gears as well as for axle drives
API GL-4/GL-5;MIL-L 2105/2105 D
GetriebeölTransmission oilGX 80 W 90 ML
80W-90 Multifunktionsgetriebeöl für verlängerte Ölwechselinter-valle für Schalt- und AchsgetriebeMulti-functional gearbox and transmission oil withnoticeably extended oil changing intervals for switchgears and geared axle drives
API GL-4/GL-5;MIL-L 2105/2105 D;MAN M 3343 ML; ZF TE-ML 02B, 05A, 07A, 12E,16B, 17B
GetriebeölTransmission oilGS 75 W 90 GS 80 WGS 80 W 90 GS 85 W 90GS 85 W140
75W-9080W80W-9085W-9085W-140
Kfz-Getriebeöle für Schaltgetriebe, normal verzahnteAchs- und Hypoidantriebe mit geringem AchsversatzAutomotive gearbox and transmission oils for switchgears, ordinarily geared axle and hypoid drives with lowpinion offset
API GL-4; MIL-L 2105;GS 80W: MAN 341; MB 235.1;ZF TE-ML 02A, 17AGS 80W-90:ZF TE-ML 02A, 16A, 17A
GetriebeölTransmission oilGL 80 WGL 90GL 140
80W90140
Kfz-Getriebeöle für Schaltgetriebe und Achsantriebe mitnormaler VerzahnungAutomotive gearbox and transmission oils for switchgears and ordinarily geared axle drives
API GL-3
Spezialgetriebeöl fürTrabantSpecial transmissionoil for Trabant
Getriebeöl für PKW "Trabant", vermeidetSynchronisationsproblemeTransmission oil for passenger car "Trabant", avoidssynchronisation problems
V40 ca. 68 mm2/s
ATF D ll E Vollsynthetisches Getriebeöl für automatische Kfz- Getriebe,ermöglicht die Verlängerung der Ölwechselfristen im ZF-Ecomatund Automatikgetrieben von VoithFully-synthetic transmission oil for automatic transmissions,makes possible the extension of oil changing intervals inZF-Ecomat and automatic transmissions of Voith
GM Dexron ll sowie / as well asFord MerconMB 236.8; MAN 339 D;ZF TE-ML 09X, 14C, 16M
ATF D lll Getriebeöl für automatische Kfz-Getriebe modernster BauartTransmission oil for automatically operating transmissions of mostleading type
GM Dexron lll sowie / as well asFord Mercon, MB 236.1/236.5;MAN 339 F; ZF TE-ML 02F,03D, 04D, 11B, 14A, 17C; VoithG 607; Allison C-4
ATF TASA Getriebeöl für automatische Kfz-Getriebe, HydrolenkungenTransmission oil for automatically transmissions in passenger andcommercial cars, hydraulic systems in automobiles
ATF Type A, Suffix A;MB 236.2; Renk (DOROMAT)
AUTOMATIKGETRIEBE - FLUIDSAUTOMATIC TRANSMISSION FLUIDS
ADDINOL- ProduktADDINOL- Product
ProduktbeschreibungProduct description
Spezifikation/OEM-FreigabenSpecifikation/OEM-Approvals
ATF D ll D Getriebeöl für automatische Kfz-Getriebe, HydrolenkungenTransmission oil for automatically operating transmissions,hydraulic system in automobiles
GM Dexron ll DMB 236.7; MAN 339 D; ZF TE-ML 02F, 03D, 04D, 14A, 17C;Voith G 607; Renk (DOROMAT)
ELEKTROISOLIERÖLETRANSFORMER OILS
ADDINOL- ProduktADDINOL- Product
ProduktbeschreibungProduct description
Spezifikation / FreigabenSpecification / Approvals
13
THE ART OF OIL • SINCE 1936
TransformatorenölTransformer oilTRF-GNTRF-GNX
Naphthenbasische Transformatorenöle; Isolier- undKühlflüssigkeit.TRF-GNX enthält AlterungsschutzstoffNaphthene-base transformer oils; insulating andcooling fluids.TRF-GNX contains an anti-ageing additive
DIN 57370/1; VDE 0370/1, Klasse A(gültig bis/valid to 04/2007)DIN EN 60296; VDE 0370/1 (gültigab/valid starting from 01/2005)V20 ca. 17 mm2/s
FormentrennölMoulding release oilF 5F 10
Mineralölbasische, nicht wassermischbare und lösungsmittelfreieFormentrennöle; bei niedrigen Temperaturen sprühfähig, biologischabbaubarMineral oil based, being not mixable with water and free of anysolvents, sprayable at low temperatures, biodegradable
ISO-VG 5, 10
FormentrennölMoulding releaseF 68F 150 NF 220
Mineralölbasische, nicht wassermischbare Formentrennöle,Anwendung bevorzugt im erwärmten Zustand, z. B. bei derPorenbeton-ElementefertigungMineral oil based, not water-mixable moulding release oils,application preferable in heated state; e.g. during the processingof cellular concrete elements
ISO-VG 68, 150, 220
FormentrennölMoulding release oilF 2 SpezialF 8 Spezial
Nicht wassermischbare Formentrennöle mit Synthesekomponentenfür höhere AnforderungenNot water-mixable moulding release oils on synthetic basis forhigher requirements
ISO-VG 2, 8
ÖkoplusEcoplusXT 15
Biologisch schnell abbaubares Formentrennöl auf Pflanzenölbasis;sprühfähigFast biodegradable moulding release oil based on vegetable oilfor, spraying ability
ISO-VG 15Umweltzeichen"Blauer Engel"Environmental label"Blue Angel"
GleitbahnölGuideway oilXG 32XG 68XG 100 XG 220
Gleitbahnöle mit ausgeprägtem Demulgiervermögen und gutenAnti-Stick-Slip-EigenschaftenGuideway oils with pronounced demulsifying power and goodanti-stick slip characteristics.
DIN 51502 (CGLP);DIN 51524/2 (HLP);DIN 51517/3 (CLP)
ÖkoplusEcoplusXT U
Universell einsetzbare, biologisch schnell abbaubare Trennmittel-Emulsion auf Pflanzenölbasis;z.B. Fertigung von lunker- und porenarmen Sichtbetonflächen.Universally applicable, biologically fast degradable moulding release emulsion based onvegetable oil; e.g. manufacturing of blow hall-poor and pore-poor exposed concrete areas.
FORMENTRENNÖLEMOULDING RELEASE OILS
ADDINOL- ProduktADDINOL- Product
ProduktbeschreibungProduct description
Spezifikation / FreigabenSpecification / Approvals
GLEITBAHNÖLEGUIDEWAY OILS
ADDINOL- ProduktADDINOL- Product
ProduktbeschreibungProduct description
Spezifikation / FreigabenSpecification / Approvals
HOCHTEMPERATURSCHMIERSTOFFEHIGH TEMPERATUR LUBRICANTS
ADDINOL- ProduktADDINOL- Product
ProduktbeschreibungProduct description
SeitePage
14
THE ART OF OIL • SINCE 1936
SpezialölXH 220 A
Schmierung von Förder- und AntriebskettenLubrication of conveying and driving chains
18
Chain LubeXHT 50 … XHT 3000(Spray)
Hochtemperatur- Kettenöle auf Basis synthetischer EsterHigh-temperature chain oils based on synthetic ester
18
Panelube XBR 50Panelube XH 220
Schmierung thermisch hochbelasteter ReibpaarungenLubrication of thermal high loaded friction pairings
30
CliptecXHS 280
Hochtemperatur-KettenschmierölHigh-temperature chain oil
30
Glass Lube XHG 220 Vollsynthetisches Hochleistungsöl, vorrangig zur Schmierung von Aggregaten bei derGlasherstellungFully-synthetic high-performance oil, preferably to lubrication of aggregates in the glassproduction
30
CliptecXHS 150 HT
Hochtemperatur-KettenschmierölHigh-temperature chain oil
30
HightempXFT 2
HochtemperaturfettHigh temperature grease
26
PFPE Premium XH 1PFPE Premium XH 2
PFPE-Fett auf SyntheseölbasisPFPE-Grease based on synthetic oil
26
HydraulikölHydraulic oil HL 10 - HL 100
Zinkfreie Hydrauliköle, geeignet für Hydraulikanlagen mitNenndrücken bis 16 MPa, auch zur Schmierung von Lagernund gering belasteten GetriebenZinc-free hydraulic oils, suitable for hydraulic systems withnominal pressures up to 16 MPa, also applicable for thelubrication of low-load transmissions
DIN 51524/1 (HL)DIN 51517/2 (CL)DIN EN ISO 6743:HL
HydraulikölHydraulic oil HLP 10 - HLP 100
Hydrauliköle, geeignet für Hydraulikanlagen mit Nenndrückenüber 16 MPa, auch zur Schmierung von Lagern und GetriebenHydraulic oils, suitable for hydraulic systems with nominalpressures of more than 16 MPa, also applicable for thelubrication of bearings and transmissions
DIN 51524/2 (HLP)DIN EN ISO 6743:HM
HydraulikölHydraulic oilHLP 22 S … 150 S
zinkfreie Hydrauliköl für hohe Drücke mit verbessertemVerschleißschutzverhalten und guten GrenzflächeneigenschaftenZinc-free hydraulic oils for high pressures with improvedanti-wear characteristics and good interfacial properties
DIN 51524/2 (HLP)SEB 181 222, MRW 102 030 BWB TL 9150 0019
ADDIFLON OXS 400
Thermisch stabiles, physiologisch unbedenkliches Fett auf SilikonölbasisThermally sturdy, physiologically harmless grease based on silicone oil
27
Anti-SSeize Paste GAL(Spray)
HochtemperaturpasteHigh temperature paste
29
MontagepasteAssembly paste HTP 700 PG
Hochtemperaturpaste mit MoS2
High temperature paste with MoS2
29
TSM 400 Spray Montage- und Mehrzweckpaste mit MoS2, auch als Spray verfügbarAssembly and multi purpose paste with MoS2, also suitable as spray
29
HYDRAULIKFLÜSSIGKEITENHYDRAULIC FLUIDS
ADDINOL- ProduktADDINOL- Product
ProduktbeschreibungProduct description
Spezifikation / FreigabenSpecification / Approvals
HYDRAULIKFLÜSSIGKEITENHYDRAULIC FLUID
ADDINOL- ProduktADDINOL- Product
ProduktbeschreibungProduct description
Spezifikation / FreigabenSpecification / Approvals
15
THE ART OF OIL • SINCE 1936
HydraulikölHydraulic oilHLP 46 AFHLP 68 AF
zink- und aschefreie Hydrauliköle, Einsatz wo Wasserzutrittnicht ausgeschlossen werden kann (demulgierend)Zinc-free and ash-free hydraulic oils, operation where watercontact cannot be excluded (demulsifying properties)
DIN 51524/2 (HLP)DIN EN ISO 6743:HM
HydraulikölHydraulic oilHLPD 10 - HLPD 68
zinkfreie Hydrauliköle, Einsatz wo Wasser, Schmutz und abra-sive Partikel in das System eindringen können (detergierendeEigenschaften)Zinc-free hydraulic oils, operations where water, dirt andabrasive particles can enter the system (detergent properties)
DIN 51524/2, (außer Demulgierver-halten / except for demulsificationability); DN 51517/3 (CLP)MAN N 698; DBL 6721;F. X. Meiller (HLPD 22);Müller Weingarten (HLPD 46)
HydraulikölHydraulic oilHVLP 15 - HVLP 68
Hydrauliköle mit verbessertem VT-Verhalten bei hoherScherstabilität; ganzjährig einsetzbar, insbesondere fürAußenhydraulikenHydraulic oils with improved viscosity-temperature behaviourand high shearing stability; applicable all year around,particularly suitable for out-door hydraulic systems
DIN 51524/3 (HVLP)DIN EN ISO 6743:HV
HydraulikölHydraulic oilHVLPD 46
Mehrbereichsöl mit detergierenden Eigenschaften.Perfor-mance wie HVLP und HLPDMultigrade oils with detergent properties, performancecomparable with HVLP and HLPD
DIN 51524/3 (HVLP)DIN EN ISO 6743:HV
Arctic Fluid 5606 Hydrauliköl mit sehr gutem VT-Verhalten; einsetzbar unterextrem stark wechselnden Temperaturbedingungen, z. B. beiarktischen Klimabedingungen und in KühlhäusernHydraulic fluid with a very good viscosity-temperature-performance; is preferably used under extremely changingtemperature conditions, e.g. in mobile hydraulics under arcticclimate conditions and in chilling houses
entspricht / meetsMIL-H 5606 E;VI 385
ÖkoplusEcoplusHETG 32-68
Biologisch abbaubare Mehrbereichshydraulikflüssigkeit aufPflanzenölbasis; von -20 °C bis 70 °C einsetzbarBiodegradable multigrade hydraulic fluid on vegetable oilbasis, applicable within the temperature range from -20 °C upto 70 °C
DIN 51524/2 (HLP)DIN 51524/3 (HVLP)Umstellungsrichtlinie VDMA 24568oder DIN ISO 15380Conversion guidelineVDMA 24568 or DIN ISO 15380
ÖkoplusEcoplusHEES 22HEES 46
Biologisch abbaubare synthetische Hydraulikflüssigkeiten aufÖlsäureesterbasis, von -25 °C bis 90 °C einsetzbarBiodegradable synthetic hydraulic fluids based on oleic acidester, applicable within the temperature rangefrom -25 °C up to 90 °C
UmstellungsrichtlinieVDMA 24568 oderDIN ISO 15380Conversion guidelineVDMA 24568 or DIN ISO 15380
Ökosynth SuperEcosynth SuperHEES 46 S
Biologisch abbaubare synthetische Hydraulikflüssigkeit aufBasis gesättigter Ester, von -25 °C bis ca. 110 °C einsetzbarBiodegradable synthetic hydraulic fluid based on saturatedester; applicable from -25 °C up to approx. 110 °C
Umstellungsrichtlinie VDMA24568 oder DIN ISO 15380Conversion guidelineVDMA 24568 or DIN ISO 15380TOST (> 2000 h).
Stoßdämpferöl BShock absorber oil B
Öl für hoch belastete Stoßdämpfer, Federbeine undLenkungsdämpferOil for heavy-duty shock absorbers, strut units and steeringabsorbers
V40 7 mm2/s~~
FG Universal46 …100
Synthetische Hochleistungsöle für Systeme in der Lebensmittelund pharmazeutischen Industrie, -30 °C bis +220 °CSynthetic high-performance oils for systems in the food andpharmaceutical industry, -30 °C up to +220 °C
HLP/HVLP/CLP/VDLISO-VG 46, 68, 100;erfüllen / fulfills USDA H1
System Cleaner 1-33 Reinigungskonzentrat für Schmiersysteme (Hydraulikkreisläufe undGetriebe) Cleaning concentrate for lubrication systems(hydraulic systems and transmissions)
ISO-VG 46
ADDINOL- ProduktADDINOL- Product
ProduktbeschreibungProduct description
Spezifikation / FreigabenSpecification / Approvals
INDUSTRIE - GETRIEBEÖLEINDUSTRIAL GEAR OILS
16
THE ART OF OIL • SINCE 1936
GetriebeölGear oilCLP 46 - CLP 680
Schmieröle zur Schmierung geschlossener Industriegetriebe.Lubricating oils for the lubrication of closed industrial gearsystems.
DIN 51517/3
GetriebeölGear oilCLP 68 S - CLP 680 S
Schmieröle mit verbesserten Verschleißschutz- undGrenzflächeneigenschaften, Einsatz in Umlaufsystemen derStahlindustrie.Lubricating oils with increased anti-corrosion and interfacialproperties; particularly suitable for the application in circulatingsystems in the steel industry.
DIN 51517/3 (CLP);SEB 181226Flender - FreigabeFlender - Approval
GetriebeölGear oilCKT 68 - 460
Vollsynthetische Getriebeöle Typ CLPTemperatureinsatzbereich (-30 °C bis +150 °C).Fully-synthetic gear oil of type CLP,temperature range (-30°C to 150 °C).
übertreffen / exceedDIN 51517/3 (CLP)Flender - FreigabeFlender - Approval
SPEZIALGETRIEBEÖLESPECIAL GEAR OILS
ADDINOL- ProduktADDINOL- Product
ProduktbeschreibungProduct description
Spezifikation / FreigabenSpecification / Approvals
Eco Gear100 M … 680 M
Hochleistungsgetriebeöle mit Surftec®-Technologie;Temperatureinsatzbereich von -10 °C bis 100 °C; verhindernGraufleckigkeit und Pittings; Verbesserung des Einlaufverhaltens;Wiedereinglättung von geschädigten Reiboberflächen.High-Performance-gear-Oils of Surftec® -technology; temperaturerange from -10 °C up to 100 °C, prevention of grey-flecking andpittings; improvement of the running-in behaviour; re-smoothingof extremely strained friction surfaces;
übertreffen/exceedsDIN 51517/3 (CLP)ISO 12925-1 sowie alle technischrelevanten Anforderungenas well as all technical relevantrequirementsFlender-FreigabeFlender-Approval
Eco Gear100 S … 680 S
Silikonfreie synthetische Hochleistungsgetriebeöle mit Surftec®-Technologie; Temperaturbereich von -30 °C bis 120 °C; für mecha-nisch und thermisch hoch belastete Getriebe (z.B.Windkraftanlagen); Verhinderung von Graufleckigkeit und Pittings;deutliche Verlängerung der Maschinenstandzeiten und derSchmierstofflebensdauer; Energieeinsparung; Wiedereinglättungvon geschädigten ReiboberflächenSilicon-free synthetic High-Performance-Gear-Oils of Surftec® -technology; temperature range from -30 °C up to +120 °C;application to be preferred in case of heavy load dynamic-changing driving forces and thermal critical conditions (e.g. windpower plants); prevention of grey-flecking and pittings; noticeablyprolongation of the life-time of engine and of lubricating life; savingof energy; re-smoothing of extremely strained friction surfaces
übertreffen/exceedsDIN 51517/3 (CLP HC),ISO 12925-1 sowie alle tech-nisch relevanten Anforderungenas well as all technical relevantrequirementsFlender- FreigabeFlender- Approval
Eco Gear68 S-T
Silikonfreies vollsynthetisches Hochleistungs-Getriebeöl mitSurftec®-Technologie; überragendes Kältefließverhalten(Pourpoint unter -50 °C); sonstige Eigenschaften wie EcoGear … SSilicon-free fully-synthetic High-Performance-Gear-Oil ofSurftec® -technology; best cold-flow behavior; very low pourpoint (about -50 °C); performance like Eco Gear … S
übertreffen/exceedsDIN 51517/3 (CLP HC),ISO 12925-1 sowie alle tech-nisch relevanten Anforderungenas well as all technical relevantrequirementsFlender- FreigabeFlender- Approval
ADDINOL- ProduktADDINOL- Product
ProduktbeschreibungProduct description
Spezifikation / FreigabenSpecification / Approvals
SPEZIALGETRIEBEÖLESPECIAL GEAR OILS
17
THE ART OF OIL • SINCE 1936
SchmierölLuboilRS 150 A …RS 680 A
Vollsynthetische Lager- und Getriebeöle vom Typ PGLP(Polyglykolbasis); Einsatztemperatur bis 220 °CFully-synthetic bearing- and gear oils of PGLP-type (on polyethyleneglycol basis); applicable up to a temperature of 220 °C
CLP DIN 51517/3;ISO-VG 150, 220, 320, 460, 680
FG Universal46 … 100
Synthetische Hochleistungsöle für Anlagen zurLebensmittelherstellungSynthetic High-performance oils for plants for food production
HLP/HVLP/CLP/VDLErfüllen / fulfills USDA H1ISO-VG 46, 68, 100;
System Cleaner1-333
Reinigungskonzentrat für Schmiersysteme(Hydraulikkreisläufe und Getriebe)Cleaning concentrate for lubrication systems(hydraulic systems and gearboxes)
ISO-VG 46
KältemaschinenölRefrigerator oilsXKS 32 … 100
Vollsynthetische KältemaschinenöleFully-synthetic refrigerator oils
DIN 51 503/1, Gruppe/groupKAA, KC und/and KE; ISO-VG32, 46, 68, 100
HaftölAdhesive oil32, 100 … 320
Mineralölbasische Spezialöle für Ketten, Gatter undTransporteinrichtungen aller Art. Haftöl 100 besonders fürschnelllaufende Sägeketten geeignetMineral oil based special oils for chains, gates and transportfacilities of any kind, adhesive oil 100 is particularly suitable forhigh-speed chain saws
Stihl SWN 39113/1 (Haftöl 100 /Adhesive oil 100)
Kettenhaft-SSprayChain adhesive spray
Teilsynthetisches Kettenhaftspray für stark belasteteMotorradketten und schnelllaufende Ketten im Industriebereich.Semi-synthetic chain adhesive spray, suitable for heavy stressedchains of motorbikes and for speedy chains in industrial field
ÖkoplusEcoplusXS 68
Biologisch abbaubares Sägekettenhaftöl auf PflanzenölbasisBiodegradable chain saw oil on the basis of vegetable oil
Richtlinie / GuidelineKWF Groß-Umstadt
KÄLTEMASCHINENÖLREFRIGERATOR OILS
ADDINOL- ProduktADDINOL- Product
ProduktbeschreibungProduct description
Spezifikation / FreigabenSpecification / Approvals
KETTENÖLECHAIN OILS
ADDINOL- ProduktADDINOL- Product
ProduktbeschreibungProduct description
Spezifikation / FreigabenSpecification / Approvals
GetriebeölCLP 100 MWCLP 150 MW
Schmierung nahezu aller Bautypen von geschlossenenIndustriegetrieben mit Stirn-, Kegelrad- undSchneckenverzahnungLubrication of nearly all types of closed industrial gears withspur gearing, bevel gearing and wor tooth systems
Freigabe / ApprovalMüller Weingarten
Bruggerwert / value >55N/mm2
Dornier GetriebeölTransmission oilHLS 90-A
Getriebeöl für Aggregate der Firma Dornier.Transmission oil for aggregates of the company Dornier
Dornier
ADDINOL- ProduktADDINOL- Product
ProduktbeschreibungProduct description
Spezifikation / FreigabenSpecification / Approvals
KETTENÖLECHAIN OILS
18
THE ART OF OIL • SINCE 1936
Chain LubeXHT 50 … 3000(Spray)
Hochtemperatur- Kettenöle auf Basis synthetischer Ester.Temperatureinsatzbereich zwischen 200 °C und 250 °C.High temperature chain oils based on synthetic esters;operation temperature range between 200°C and 250°C;
ISO-VG 50, 150, 250, 3000erfüllt / fulfills DIN 51517/3 (CLP)
Chain-BBolt-FFluid XHS 220
Schmierung von Förderketten und Halterungen inFolienstreckanlagen bei Temperaturen bis 210 °C und bei hohenTemperaturen und schwierigen Schmierbedingungen in derTextilindustrie, bei der Verarbeitung von Glas und Dämmstoffenoder bei Lacktrocknern usw.Lubrication of conveyor chains and fixtures in film stretching lines attemperatures up to 210 °C and at high temperatures and difficultlubrication conditions in the textile industry, with the processing ofglass and insulating materials or in the varnish dryers
V40 220 mm2/s;
Freigabe BrücknerApproval Brueckner
Plantfluid Hochtemperatur-Schmierstoff für die Lebensmittelindustrie zurSchmierung von Warentransportbändern und -ketten vonDurchlauföfen in Großbäckereien, Temperatureinsatzbereich: 0°C bis+290°CHigh-temperature lubricant for food industry the lubrication ofconveyer belts of goods-volume and chains in continuous furnace inlarge baker's shops, operation temperature range: 0°C up to +290°C
V40 42 mm2/s
WXA Spray Geeignet für die Schmierung von Transportketten oder - bändernin der Getränke- und Verpackungsmittelindustrie oder derenKonservierung (temporär)Suitable for lubrication of conveyor chains or belts in thebeverage industrie and packaging industry or theirpreservation (temporary)
ISO-VG 68Deutsches Arzneibuch (DAB);European Pharmacopoeia(PhEur 2000); BritishPharmacopoeia (BP 1993); USPharmacopoeia (USP XXIII);Food and Drug AdministrationUSDA-H1 (FDA § 178.3620a)
KettenölChain oil32 FG150 FG460 FG Spray
Vollsynthetische Spezialöle für die Schmierung vonTransportketten in der Lebensmittel-, Kosmetik- undPharmaindustrieFully-synthetic special oils to lubricate conveyor chains in food,cosmetics and pharmaceutical industry
ISO-VG 32, 150, 460;NSF Kategorie / category H1;erfüllt / fulfills: FDA-RL 21 CFR178.3570
KorossionsschutzöleCorrosion ProtectionOilsKO 7 C … 220 C
Lösungsmittelfreie Öle für den temporären Schutz vonEisenmetallenSolvent-free oils for the temporary protection of iron metals
ISO VG 7, 32, 68, 220
KOROSSIONSSCHUTZÖLECORROSION PROTECTION OILS
ADDINOL- ProduktADDINOL- Product
ProduktbeschreibungProduct description
Spezifikation / FreigabenSpecification / Approvals
SpezialölSpecial oilXH 220 A
Vollsynthetisches Spezialöl für Antriebsketten inHochtemperaturanlagen bis 250 °CFully-synthetic special oil for the lubrication of conveyor anddriving chains in installations working at highest temperature-levelup to 250 °C.
ISO-VG 220
~~
~~
ADDINOL- ProduktADDINOL- Product
ProduktbeschreibungProduct description
Spezifikation / FreigabenSpecification / Approvals
KOROSSIONSSCHUTZÖLECORROSION PROTECTION OILS
19
THE ART OF OIL • SINCE 1936
KorossionsschutzölCorrosion Protection OilKO 6-F(Spray)
Lösungsmittelhaltiges Korrosionsschutzfluid mit wasserverdrän-genden Eigenschaften und gutem Kriechvermögen. Bildet dün-nen, öligen bis leicht cremigen FilmSolvent-containing anti-corrosion fluid with water-repellentproperties and good creeping characteristics, forms a thin oily toslightly creamy film
V20 6 mm2/s
KriechölCreeping oil
Lösungsmittelhaltiges Korrosionsschutzöl mit wasserverdrängendenund rostlösenden Eigenschaften sowie gutem Kriechvermögen;bildet dünnen, öligen Film (auch als Spray erhältlich)Solvent-containing anti-corrosion oil with water-repellent and rust-disolving properties as well as with good creeping ability, forms athin oily film (also available as spray)
V20 ca. 3,4 mm2/s
WaffenölWeapon oil W 18
Vollsynthetisches Öl zur Schmierung, Konservierung undReinigung von Waffen; von -40 °C bis 160 °C einsetzbar (auch als Spray erhältlich)Fully-synthetic oil for the lubrication, conservation and cleaning of weapons; applicable within the temperature range from - 40 °C up to 160 °C (also available as spray)
Bundeswehr, TL 9150-0078/1NATO - Code S-761V40 ca. 18 mm2/s
Penta-FFluid DW 08 Mineralölbasisches Korrosionsschutzmittel zur Konservierung vonblanken, chemisch oder galvanisch behandelten EisenoberflächenMineral oil based corrosion protection fluid for conservation ofshiny, chemically and galvanically treated iron surfaces
V40 ca. 8 mm2/s
Penta-FFluid KS 190 Wasseremulgierbares Korrosionsschutzmittel für denKorrosionsschutz von Metall- und Gussteilen bei InnenlagerungWater-emulsive corrosion protection agent for the corrosionprotection of metal and cast parts during interior storage
V40 ca. 10 mm2/s
SchmierölLuboilRL 2RL 5
Niedrigviskose, legierte Mineralölraffinate speziell zur Schmierungschnell laufender SpindelnAlloyed mineral oil raffinates with a low viscosity level, particularlyfor the lubrication of high-speed spindles
ISO-VG 2 und 5 DIN 5151772
FeinmechanikölPrecision mechanicsoilXF 12
Spezialöl für die Schmierung feinmechanischer Geräte, auch alsSpray erhältlichSpecial oil for lubrication of precision devices, also available asspray
V40 ca. 12 mm2/s
SchmierölLuboilRS 150 A .. RS 680 A
Vollsynthetische Lager- und Getriebeöle vom Typ PGLP(Polyglykolbasis), Einsatztemperatur bis 220 °CFully-synthetic bearing- and transmission oils of PGLP-type(polyethylene glycol); applicable up to a temperature of 220°C
CLP DIN 51517/3;ISO-VG 150, 220, 320, 460,680
ÖkoplusEcoplusX 46 LX 100 L
Biologisch schnell abbaubares Lagerschmieröl aufPflanzenölbasis, insbesondere zur Verlustschmierung (u. a. fürAchs- und Gleitlager von Schienenfahrzeugen)Rapidly biodegradable bearing luboils on vegetable oil basis,particularly for loss lubrication and for maintenance of the axle andsliding bearings of railroad vehicles
ISO-VG 46, 100Umweltzeichen "BlauerEngel"Environmental label "BlueAngel"
LAGERSCHMIERÖLEBEARING OILS
ADDINOL- ProduktADDINOL- Product
ProduktbeschreibungProduct description
Spezifikation / FreigabenSpecification / Approvals
~~
LEBENSMITTEL- UND H1- PRODUKTEPRODUCTS FOR FOOD INDUSTRY AND H1
ADDINOL- ProduktADDINOL- Product
ProduktbeschreibungProduct description
SeitePage
20
THE ART OF OIL • SINCE 1936
Kettenöl / Chain oil32 FG150 FG, 460 FG460 FG Spray
KettenöleChain oil
18
WXA Spray Transportkettenöl, temporäre KonservierungConveyor chain oil, temporary conservation
18
FG Universal46 …100
Vollsynthetische Getriebe-, Hydraulik- und VerdichteröleFully-synthetic transmission, hydraulic and compressor oil
15; 17
Multiplex FD 1 Multiplex FD 2
SchmierfetteLubrication greases
27
ADDISIL Extemp 23FG
SchmierfettLubrication grease
27
Plantfluid Hochtemperatur-Schmierstoff zur Schmierung von Warentransportbändern- und kettenvon Durchlauföfen in GroßbäckereienHigh-temperature lubricant for the lubrication of conveyer belts of goods-volume andchains in continuous furnace in large baker's shops
18
Schmieröl / LuboilD 75D 120
Unlegierte MineralöleUnalloyed mineral oils
ISO-VG 68ISO-VG 150
Schmieröl / LuboilD 150
Additiviertes Lagerschmieröl für höhere thermischeBeanspruchungenBearing oil with additives for highest thermal load
ISO-VG 150
Schmieröl / LuboilR 7, R 15 … 100
Unlegierte Mineralölraffinate zur Schmierung von Maschinen undAnlagen mit Durchlauf- und UmlaufsystemenUnalloyed mineral oil raffinates for lubrication of machines andinstallations with passing through and circulating systems
L-AN DIN 51501
Weißöl / White oilWX 15, 22, 68
Medizinische WeißöleMedical white oils
30
MASCHINENÖLELUBOILS
ADDINOL- ProduktADDINOL- Product
ProduktbeschreibungProduct description
Spezifikation / FreigabenSpecification / Approvals
ADDINOL- Produkt ProduktbeschreibungProduct descriptionADDINOL- Product
Visk
ositä
t Vi
scos
ity
mm2/s(40 °C)
Flam
mpu
nkt
Flas
h po
int
Akt
iv S
Act
ive
S
Bun
tmet
all
Non
-ferr
ous
met
als
COC(°C)
Eignung / S u i t a b i l i t y :- : nicht geeignet / not suitable+- : bedingt geeignet / conditionally suitable+ : geeignet / suitable
METALLBEARBEITUNGSÖLE - NICHT-WASSERMISCHBARMETAL WORKING OILS - NON-MISCIBLE IN WATER
21
THE ART OF OIL • SINCE 1936
Penta-CCool NM 12 12,0 >150 ja / yes + - Bohröl für das TieflochbohrenDrilling oil for deep drilling operations
Penta-CCool NM 21 1,64 >60 nein / no + Zieh- und Stanzmittel für Eisen- und Nichteisenwerkstoffe mitleichten bis mittelschweren AnforderungenDeep-drawing and punching fluid for iron and non-iron metalswith easy to moderately severe requirements
Penta-CCool NM 63 30 236 nein / no + Zerspanung von Automatenstählen, Aluminiumwerkstoffen,Baustählen, Temperguss, legierten und unlegiertenVergütungsstählen geeignet für Gewindewalzen undZahnradschleifenCutting from good to moderately heavy cutable ferrous metal,aluminum, grey cast iron, alloyed and unalloyed steels,suitable for threat milling and smoothing of gearwheel
MehrzweckölMulti-ppurpose oil32 ZF46 ZF
3246
220>230
nein / no + Chlor- und zinkfrei; geeignet als Schneid-, Getriebe- undHydrauliköleChlorine- and zinc-free;suitable for cutting, gear box and hydraulic oils
Autocut22 A 22 A/1
22 164165
nein / no + Chlorfreie Schneidöle für geringe bis hohe Anforderungen,speziell für AutomatenarbeitenChlorine-free cutting oils for easy to high requirements,especially for automatic tool machines
Autocut22 B/1
22 165 ja / yes - Für sehr hohe Anforderungen (Gewindebohren,Zahnradbearbeitung, etc.), speziell für AutomatenarbeitenFor very high requirements (tapping, gearwheel operation,etc.) especially for automatic tool machines
Autocut32 B-ZF
32 190 ja / yes - Chlor- und zinkfreies Schneidöl, für hohe Anforderungen, fürschwer bis sehr schwer zerspanbare Stähle, speziell fürAutomatenarbeitenChlorine- and zinc-free cutting oil, for high requirements, fordifficult to very difficult cutable steels, specially for automatictool machines
SchneidölCutting oilK 16 SK 16 S Pf K 33 S Pf 30
16163
200205220
ja / yes - Chlorfreie Schneidöle zur Bearbeitung von Stahl (Automaten,Räum- und Gewindearbeiten, Schaben von Zahnrädern)Chlorine-free cutting oils for working of steel (automatic,rouching and thread operations, scraping of toothed wheels)
grind 5 B 5 112 nein / no + Chlorfreies Schleiföl zum Honen und zur Fein- undEndbearbeitung von Stählen, NE-Metallen und GusseisenChlorine-free grinding oil for honing and for fine and finalprocessing of steel, non-ferrous metals and cast iron
Penta-CCool NM 22 1,8 >60 nein / no +
METALLBEARBEITUNGSÖLE - NICHT-WASSERMISCHBARMETAL WORKING OILS - NON-MISCIBLE IN WATER
22
THE ART OF OIL • SINCE 1936
ADDINOL- Produkt ProduktbeschreibungProduct description
••• Weitere Produkte auf Anfrage / Further products on request •••
ADDINOL- Product
Visk
ositä
t vi
scos
ity
mm2/s(40 °C)
Flam
mpu
nkt
Flas
h po
int
Akt
iv S
Act
iv S
Bun
tmet
all
Non
-ferr
ous
met
als
COC(°C)
Eignung / S u i t a b i l i t y :- : nicht geeignet / not suitable+- : bedingt geeignet / conditionally suitable+ : geeignet / suitable
grind 15 B/2 15 174 nein / no + Chlorfreies Schleiföl zur Bearbeitung von Buntmetallen sowieStählen bei hohen Bearbeitungsgeschwindigkeiten(Bohrnutenschleifen)Chlorine-free grinding oil for processing of non-ferrous metalsand of steel at high processing speed (drilling groove grinding)
form 150 C-ZF 150 206 ja / yes - Chlor- und zinkfreies Umformöl zum Tiefziehen, Feinschneidenund Kaltfließpressen von sehr schwer umformbarenWerkstoffen und deren Konservierung, nicht für dieBearbeitung von Buntmetallen geeignetA chlorine- and zinc-free forming oil for deep drawing, finecutting and cold extrusion of very difficult formable materialsand their conservation
HärteölHardening oil29
29 210 nein / no +- Hochoxidationsbeständiges Mineralölraffinat mit engemSiedebereich und niedrigem Dampfdruck zum Härten vonWerkzeugen aus legierten WerkzeugstählenA highly oxidation-stable mineral oil raffinate with a narrowboiling range and a low vapour pressure for the hardening oftools made from alloyed tool steel
ErosionsflüssigkeitErosion fluidED 2 L
2,4 107 nein / no +- Isolier-, Kühl- und Spülmedium für die elektroerosiveMetallbearbeitungInsulating, cooling and flushing medium for the electro-erosivemetal processing
ADDINOL- Produkt ProduktbeschreibungProduct descriptionADDINOL- Product
Min
eral
ölan
teil
Con
tent
of m
iner
al o
il
pH-W
ert
ph-V
alue
Sta
hl /
Ste
el
Gus
s / C
ast i
ron
Alu
min
ium
Bun
tmet
all
Non
-ferr
ous
met
als
Mag
nesi
um
(%)
METALLBEARBEITUNGSÖLE - WASSERMISCHBAR METAL WORKING OILS - MISCIBLE IN WATER
Eignung / S u i t a b i l i t y :- : nicht geeignet / not suitable+- : bedingt geeignet / conditionally suitable+ : geeignet / suitable++ : gut geeignet / very good suitable
Penta-CCool WM 100 80 9,0 ++ +- ++ ++ - Klassische Bohremulsion, universell einsetzbar, für allespanenden BearbeitungsvorgängeClassical drilling emulsion, universally applicable, for allcutting operations
Penta-CCool WM 410 47 9,2 ++ + + ++ - Universelles Kühlschmiermittel für alle spanendenBearbeitungsvorgänge auf automatischenWerkzeugmaschinenUniversally coolling lubricant for all cutting operationson automatic tool machines
METALLBEARBEITUNGSÖLE WASSER MISCHBARMETAL WORKING OILS - MISCIBLE IN WATER
THE ART OF OIL • SINCE 1936
ADDINOL- Produkt ProduktbeschreibungProduct descriptionADDINOL- Product
Min
eral
ölan
teil
Con
tent
of M
iner
al o
il
pH-W
ert
ph-V
alue
Sta
hl /
Ste
el
Gus
s / C
ast i
ron
Alu
min
ium
Bun
tmet
all
Non
-ferr
ous
met
als
Mag
nesi
um
Eignung / S u i t a b i l i t y :- : nicht geeignet / not suitable+- : bedingt geeignet / conditionally suitable+ : geeignet / suitable++ : geeignet / suitable
Penta-CCool WM 420 9,0 + +- - - - Zieh- und Stanzöl für das Ziehen von Blechen bei niedri-gen Umformgraden und Stanzen bis 2 mm Materialdickesowie Ziehen von phosphatierten WerkstückenPulling and punching oil pulling from sheet metals at lowtransformation degrees and punching up to 2 mm materialthickness as well as pulling of phosphate workpieces
Penta-CCool WM 430 30 9,2 ++ ++ +- +- - Kühl- und Schmiermittel für allgemeine Bearbeitungen wieDrehen, Fräsen, Bohren, auch für Schleifoperationen geeignetCooling and lubrication agent for general operations like turning,milling and drilling, also suitable for smoothing operations
Penta-CCool WM 440 42 9,1 ++ + + +- - Universelles Kühlschmiermittel auch auf automatischenWerkzeugmaschinenUniversally coolant also on automatic tool machines
Penta-CCool WM 445 8,8 ++ +- +- ++ - Für schwierigste Zerspanungsarbeiten sowie Gewindeschneidenan hochlegierten Stählen. Booster für Penta-Cool WM 440For most difficult cutting processes as well as thread cuttingat highly alloyed steels, Booster for Penta-Cool WM 440
Penta-CCool WM 490 25 9,1 ++ ++ ++ - - Für schwierigste Zerspanungsarbeiten, Räumen,Tieflochbohren, Bandsägen, Reiben und GewindearbeitenFor most difficult cutting processes, roaching, rubbing,belt sawing and threat-working
Penta-CCool WM 600 46 9,2 ++ +- ++ +- - Einsatz bei allen Zerspanungsarbeiten.bedingter Einsatz für das SchleifenOperation for all cutting operations, conditionally suit-able for smooting operations
Penta-CCool WM 650 62 9,2 ++ +- ++ ++ +- Universelles Kühlschmiermittel für alle Zerspanungsarbeiten,Magnesiumanteil beachtenUniversally coolant for all cutting processes, considerthe content of magnesium
Penta-CCool WM 660 62 9,1 ++ ++ ++ ++ - Universal-Kühlschmiermittel für alle Zerspanungsarbeitenan allen metallischen Werkstoffen.Universally coolant for all cutting processes on metallicmaterials
Penta-CCool WM 810 47 9,0 ++ ++ ++ ++ ++ Biostabiles und hautverträgliches Kühlschmiermittel aufneuartiger Emulgatorbasis, universell einsetzbarBiostable and skin-tolerated coolant based on newemulsifying agents, universally applicable
Penta-CCool WMS 840 - 9,0 ++ ++ ++ ++ ++ Universal - Kühlschmiermittel - Bohren, Räumen,Tieflochbohren, Sägen, etc.Universally coolant - drilling, rouching, deep drillingoperation, sawing
Penta-CCool WS 210 - 8,7 ++ +- - - - Mineralölfreies und nitritfreies wasserlöslichesKühlschmiermittel - Kontentrat für SchleifarbeitenMineral oil-free and nitrite-free water soluble coolantconcentrates for smooting operations
Penta-CCool WS 250 - ca.9,0
++ ++ - - -
Penta-CCool WS 285 - ++ ++ - - - Kühlmittel für Schleifarbeiten an Stahl- undHartmetallwerkstoffenCooling lubricant for smoothing operations on steeland hard metal materials
••• Weitere Produkte auf Anfrage / Further products on request ••• 23
ADDINOL- Produkt
NLG
I
ADDINOL- ProductDickungsmittelThickener
Universalfette / Universal greases
SpezifikationSpecification
GebrauchstemperaturOperation temperature
ProduktbeschreibungProduct description
SCHMIERFETTELUBRICATING GREASES
24
THE ART OF OIL • SINCE 1936
MehrzweckfettMulti-ppurpose greaseL 2L 2 G L 3
223
Li/Ca-Seife/Soap+ Graphit(L2G)
K2K - 30KF2K - 30K3K - 30
-30 bis/up to +120 °C Mineralölbasis; für Wälz- undGleitlager L 2 G mitFestkörperschmierstoff (Graphit)für bessere NotlaufeigenschaftenMineral oil based, for rolling andsliding bearings, L2G containssolid-particle lubricant (graphite)with emergency operatingcharacteristics
MehrzweckfettMulti-ppurpose greaseL 2 MO 2
Li/Ca-Seife/Soap+ MoS2
KPF2K - 30 -30 bis/up to +130 °C Mineralölbasis, Schmierung vonGleitlagerungen im Misch-rebungsgebiet; alterungs-beständig, korrosionsschützendMineral oil based, lubrication ofsliding bearings with boundaryfriction, ageing resistant, corro-sion-protecting
EP MehrzweckfettMulti-ppurpose greaseL 2 EP 2
Li/Ca-Seife/Soap
KP2K - 20 -20 bis/up to +120 °C Mineralölbasis, EP- legiert;Longlife-Fett für Industrie undBauwirtschaftMineral oil based, EP-alloyed,longlife grease for industry andbuilding industry
EP MehrbereichsfettEP Multi-ggradegreaseLM 2 EP LM 3 EP
23
Li-Seife/Soap
KP2N - 40KP3N - 40
-40 bis/up to +140 °C Mineralölbasis, mild EP-legiert; fürWälz- und Gleitlager bei erhöhtenLagerbelastungenMineral oil based, mild EP-alloyed,for rolling and sliding bearingswith increased bearing loads
MehrbereichsfettMulti-ggrade greaseCS 2 EP 2
Ca-Seife/Soap KP2N-20 -25 bis/up to +140 °C Mineralölbasis; hohe Wasser-beständigkeit auch bei direkterEinwirkung von Prozesswasser, u.a. für Zentralschmieranlagen imBergbau, StahlbauMineral oil based, high water-resistance, also during directeffect of process water, centrallubrication in the mining industry,steel industry
ADDINOL- Produkt
NLG
I
ADDINOL- ProductDickungsmittelThickener
SpezifikationSpecification
GebrauchstemperaturOperation temperature
ProduktbeschreibungProduct description
SCHMIERFETTELUBRICATING GREASES
25
THE ART OF OIL • SINCE 1936
FließfettLiquid greaseSGA 600
0 Na-Seife/Soap GOF-20 -20 bis/up to+80 °C
Getriebefett auf Mineralölbasis, fürnormal belastete GetriebeMineral oil based transmission grease,for normal load transmissions
FließfettLiquid greaseSGR 4-00-9P
00 Organisch/organic
GPOOG-30 -30 bis/up to+100 °C
Mehrzweckfett auf Mineralölbasis fürIndustriegetriebeMineral oil based multi-purpose greasefor industrial gear boxes
FließfettLiquid greasePG-00
00 Li-Seife/Soap GPPOOK-40 -40 bis/up to+120 °C
Syntheseöl, Schmierung von hochbelasteten Stirnrad- und Schnec-kengetrieben bei tiefen TemperaturenSynthetic oil, lubrication of high load spurand worm gears at low temperatures
FließfettLiquid greaseLIC 000
000 Li/Ca-Seife/Soap
GPOOOE-30 -30 bis/up to+90 °C
Mineralölbasis, EP-legiert, für Zentral-schmieranlagen von NutzfahrzeugenBased on mineral oil, EP-alloyed, for centrallubrication systems of commercial cars
ÖkosynthSpurkranzfett GEcosynth FlangeGrease G
000 Ca-Seife/Soap+ Graphit
MFE000E-30 -30 bis/up to+80 °C
Schmierung der Berührungsfläche Radspur-kranz / Schienenflanke und Gleitflächen anWeichen, Zug- und Stoßeinrichtung, biolo-gisch sehr gut abbaubarLubrication of the contact surfaces wheelflange / rail flank and sliding surfaces atswitches, tension and stress installations,very good biodegradable
Actric Grease XP 2 2 Ca-Seife/Soap K2G-50 -50 bis/up to+100 °C
Mineralölbasis, Tieftemperaturfett, u.a.Einsatz in Kühlhäusern, Ventilspindelnunter arktischen BedingungenMineral oil based, deep temperaturegrease, above all operations in chillingplants, valve stems under arcticconditions
Wear Protect HTP 2 2 Li/Ca-Seife/Soap
KP2N-20 -20 bis/up to+150 °C
Mineralölbasis, Langzeitfett, insbeson-dere Einsatz im Bergbau/Tagebau,Schiffen und Bohrinseln sowieSchreitbaggernMineral oil based, long term grease, inparticular operation in mining/stripmining, ships and oil platform as well aswalking excavator
Fließfette / Liquid greases
Spezialfette / Special greases
SCHMIERFETTELUBRICATING GREASES
26
THE ART OF OIL • SINCE 1936
ADDINOL- Produkt
NLG
I
ADDINOL- ProductDickungsmittelThickener
SpezifikationSpecification
GebrauchstemperaturOperation temperature
ProduktbeschreibungProduct description
Longlife Grease HP 1Longlife Grease HP 2
12
Li/Ca-Seife/Soap
KP1K-20KP2K-30
-20 bis/up to+120 °C-30 bis/up to+130 °C
Mineralölbasis, Langzeitfette, insbeson-dere auch bei hohen Belastungen sowieextremen Umgebungseinflüssen (starkerWasseranfall)Mineral oil based, long-term grease, inparticular also with high loads as well asextreme environmental influences(strong amount of water)
HaftschmierstoffAdhesive LubricantOG 0
0 Al-Seife/Soap OGPF0R-25 -25 bis/up to+180 °C
Mineralölbasis, EP-legiert, versprühbar -insbesondere für große offeneZahngetriebe (z.B. Zementrohrmühlen)Mineral oil based, EP-alloyed,sprayable, in particular for large opentooth gears (e.g. cement tube mills)
Hightemp XFT 2 1-2
organisch /organic
KHC2S-30 -30 bis/up to+180 °C
Hochtemperaturfett auf BasisSyntheseöl, u.a. an Ofenanlagen,Heißwindventilatoren, Manipulatoren,FörderanlagenHigh temperature grease based onsynthetic oils, et al. Oven devices,hot-blast blowers, manipulators, conveyors
Multiplex XMK 2 2 Li/Ca-Seife/Soap
KHC2N-50 -50 bis/up to+130°C
PAO-Basis, Schmierung vonKonstruktionselementen derWerkstoffpaarungen Metall/Kunststoff,Kunststoff/KunststoffPAO based, lubrication of constructionelements of material combinationsmetal/plastics, plastic/plastic
Supertemp XHT 2 EP 2-3
organisch /organic
KPHC2-3R-40
-40 bis/up to+200°C
Hochtemperaturfett auf BasisSyntheseöl, Schmierung von druck- undstoßbelasteten Gleit- und Wälzlagern,u.a. an Ofenanlagen, KühlbettanlagenHigh temperature grease based onsynthetic oil, lubrication of impact-loadedsliding and rolling bearings, et.al. heatingsystems, cooling bed plants
ADDIFLON PFPEPremium XH 1Premium XH 2
Löse- undVerdünnungsmittelSolvent and diluent:ADDIFLON PFPESolvent
12
organisch /organic KFK1U-20
KFK2U-20
-20 bis/up to+280 °C(ohne Luftzutritt+300 °C)(without access ofair +300 °C)
PFPE-Fett auf Syntheseölbasis, beihohen Belastungen und extremenBetriebsbedingungen, z.B. hohenTemperaturen und Flächenpressungen,aggresiven ChemikalienPFPE-grease on synthetic oil basis, at heavy load and extreme operatingconditions, e.g. high temperatures andsurface pressure, aggressive chemicals
Spezialfette / Special greases
SCHMIERFETTELUBRICATING GREASES
27
THE ART OF OIL • SINCE 1936
ADDIFLONOXS 400
3 organisch/organic
MFSI3P-50 -40 bis/up to+200 °C
Thermisch stabiles Spezialfett aufSilikonölbasis , physiologisch unbedenk-liches Sicherheitsgleitmittel für sauerstoff-führende Anlagen, BAM-FreigabeThermal stable special grease onsilicone oil basis, physiologicallyharmless safety sliding agent foroxygenated equipment BAM-approval
ADDISIL Extemp 2 2 Li-Seife/Soap KSI2R-50 -50 bis/up to+200 °C
Silikonbasis, Langzeit- undDauerschmierung vonWerkstoffpaarungen wie Stahl/Bronze,Aluminium, Chrom und KunststoffBased on silicon, long-term andpermanent lubrication of combinationsof materials such as steel/bronze,aluminum, chrome and plastics
ADDINOL- Produkt
NLG
I
ADDINOL- ProductDickungsmittelThickener
SpezifikationSpecification
GebrauchstemperaturOperation temperature
ProduktbeschreibungProduct description
ADDISILExtemp 23 FG
3 Gel MSI3P-40 -40 bis/up to+160 °C
Weißes, physiologisch unbedenklichesLebensmittel- und Armaturenfett, BasisSilikonöl, zur Schmierung undAbdichtung von Armaturen, Dichtungen,Kükenhähnen, Manschetten undMembranen in der Brauerei-, Getränke-und Pharmaindustrie FDA (USDA-H 1)White, physiologically harmless foodand fitting grease on silicone oil basis,for lubrication and sealing of armatures,seals, plug tabs and membranes inbrewery , beverage and pharmaceuticalindustry FDA (USDA-H 1)
MultiplexFD1
FD 2
1
2
Al-Seife/Soap
Al-Seife/Soap
KPF1P-20
K2K-20
-25 bis/up to+160 °C-20 bis/up to+120 °C
Helle Aluminiumseifenfette aufWeißölbasis für Lebens- undFuttermittelindustrie, FDA (USDA-H1),physiologisch unbedenklichLight aluminum-soap grease on whiteoil basis for food and feed industry FDA(USDA-H1), physiologically harmless
Spezialfette / Special greases
Schmierfette (NSF H1) / Lubricating Greases (NSF H1)
SCHMIERFETTELUBRICATING GREASES
28
THE ART OF OIL • SINCE 1936
NLG
I
ADDINOL- ProduktADDINOL- Product
DickungsmittelThickener
SpezifikationSpecification
GebrauchstemperaturOperation temperature
ProduktbeschreibungProduct description
Longlife GreaseHS 2
2 Li-Komplex KPHC2N-60 -60 bis/up to140°C
Syntheseöl, Schmierung hoch druckbe-lasteter Wälz- und Gleitlager, insbeson-dere in KühlhäusernSynthetic oil, lubrication of high pres-sure loaded rolling and sliding bearings,in particular chilling plants
KorrosionsschutzfettAAnnttii-CCoorrrroossiioonn GGrreeaasseeSW 2
1-2 Ca-Seife/Soap KPL1-2E-25 -25 bis/up to+80 °C
Mineralölbasis, Schmierung von Gleit-und Wälzlagern insbesondere zumKorrosionsschutz von gleitenden Teilenbei Einwirkung durch aggressive Wässer(Salzwasser, Laugen) und Gase.Based on mineral oil, lubrication ofsliding and rolling bearings in particularto corrosion protection of sliding partsand against effect by aggressive water(salt-water, caustic solution) and gases
KontaktfettContact greaseEL-KK2
2 Ca-Seife/Soap M2E-30 -30 bis/up to+85°C
Schützt vor Korrosion und Verschleiß ankupferhaltigen KontaktwerkstoffenProtects for corrosion and wear oncopper containing contact materials
ÖkoplusEcoplus BG 2
2 Li/Ca-Seife/Soap
K2G-10 -10 bis/up to+100°C(kurzzeitig/short-term 120°C)
Biologisch abbaubarBiodegradable
MeisselpasteChisel Paste
1 Alu-Komplex-Seife/Soap
- -20 bis/up to+1100°C
Hochtemperaturpaste zur Verhinderungvon Kaltverschweißen, Klemmen undVerschleißerscheinungen anEinsteckwerkzeugen undVerschleißbuchsenHigh temperature paste for preventionof cold welding, clamps and wear ontools and wear sockets
ADDIFLON PTFEWhite 3 Paste
Spray:ADDIFLON PTFEFluid Spray
3 PTFE MLE3N-20 - 20 bis/up to+150°C
Weiße, haftfeste Mehrzweckpaste aufvollsynthetischer Basis mit PTFE,Schmierung von gleitendenMaschinenelementen aus Metall,Kunststoff und Keramik, u.a. Kalt- undHeißwasserarmaturenWhite, adhesive multi-purpose paste ona fully synthetic basis with PTFE,lubrication of sliding machine partsmade of metal, plastic and ceramics,e.g. cold and hot water fittings
Sonstige Schmierfette / Other lubricating greases
Pasten / Pastes
SCHMIERFETTELUBRICATING GREASES
29
THE ART OF OIL • SINCE 1936
NLG
I
ADDINOL- ProduktADDINOL- Product
DickungsmittelThickener
SpezifikationSpecification
GebrauchstemperaturOperation temperature
ProduktbeschreibungProduct description
Anti-SSeize Paste GALSpray:ADDINOL Anti-SSeizeSpray GAL
1 - - -40 bis/up to+1.200°C
Hochtemperatur-Montagepaste auf voll-synthetischer Basis, Sicherung derTrenn- und Gleitwirkung, nicht zuSchmierung von Wälzlagern geeignetHigh-temperature paste on fully-syntheticbasis, to ensure the separating andsliding effect, not suitable for lubricationof rolling bearings
Anti-SSeize Paste 23White
- PAO - -60 bis/up to+250°C
Helle Mehrzweckpaste aufMineralölbasis, für hochbelastete Gleit-und Gelenklager, Spindeln undFührungen, als Fertigungshilfsstoff beibestimmten UmformverfahrenLight multi-purpose paste on mineral oilbasis for heavely loaded sliding andhinge bearings, spindles and guides, asmanufacturing agent at certain remodel-ling processes
Trenn- undSchmierpaste GSM 400Release and lubrica-tion paste GSM 400
2 synthetisch /synthetic+ Graphit /graphite
- -20 bis/up to+140°C
Dunkle Mehrzweckpaste aufMineralölbasis mit Graphit, auch zurAbdichtung und Konservierung u.a. inChemie-, Kraft- und Stahlwerken sowieSchifffahrtDark multi-purpose paste on mineral oilbasis with graphite, suitable for sealingand preservation, e.g. in chemicalplants, power stations, steelworks andshipping
MontagepasteAssembly pasteHTP 700 PG
2 synthetisch /synthetic
- -40 bis/up to+700°C
Schwarzgraue, universell einsetzbareHochtemperaturpaste auf BasisSyntheseöl und MoS2 als Festschmier-stoff, u.a. Schmierung von heißenSchraubverbindungen, Verbesserungeingeschränkter Einlaufbedingungen,auch für Wälz- und GleitlagerBlack-grey, general-purpose high-temperature paste on basis of syntheticoil and MoS2 as solid lubricant, suitablefor lubrication of hot screw connections,improvement of the initial conditions,also for rolling and sliding bearings
TSM 400 Spray - MoS2 - -35 bis/up to+450°C(bei eingeschränk-tem Luftzutritt bis+630°C)(at reduced airaccess up to+630°C)
Dunkle Montage- und Mehrzweckpastemit hoher Druckbeständigkeit,MineralölbasisDark assembly and multi-purpose pastewith high pressure resistance, mineraloil basis with MoS2
Pasten / Pastes
SPEZIALPRODUKTESPECIAL PRODUCTS
ADDINOL- ProduktADDINOL- Product
ProduktbeschreibungProduct description
Spezifikation / FreigabenSpecification / Approvals
30
THE ART OF OIL • SINCE 1936
SpezialölSpecial oilXB 46XB 100
Mineralölbasische Spezialöle vorwiegend zur Schmierungvon DruckluftgerätenSpecial oils based on mineral oil basis, preferably used forthe lubrication of compressed air devices
ISO-VG 46ISO-VG 100
Textilmaschinenöl Textile machine oil22 T … 150 T
Teilsynthetische und auswaschbare HochleistungsöleSemi-synthetic and scourable high-performance oils
ISO-VG 22, 32, 46, 100 und150
WeißölWhite oilWX 15,WX 22,WX 68
Medizinische WeißöleMedical Whiteoils
Deutsches Arzneimittelbuch(Aktuelle Ausgabe);European Pharmacopoeia(2. Auflage);US Pharmacopoeia(USP X XIII); Food and DrugAdministration(FDA § 178.3620 a)
Gatteröl / Gate oil220320460
Mineralölbasische Spezialöle mit sehr gutem Haftvermögenfür die Schmierung der Schneidtechnik in der HolzindustrieMineral oil based special oils with very good adhesive abilityfor lubrication of cutting processes in the wood industry
ISO-VG 220; ISO-VG 320; ISO-VG 460
PanelubeXBR 50XH 220
Synthetische Hochleistungsöle auf Esterbasis zurSchmierung thermisch hochbelasteter ReibpaarungenSynthetic high performance oils based on ester forlubrication of thermical high load friction pairings.
Viskositäten bei 40 °C in mm2/s:ca. 50 und 250;Freigabe Dieffenbacher- Pressen;bis +260 °C einsetzbarViscosity at 40 °C in mm2/s: ca.50 and 250;Approval Dieffenbacher-Presses;up to +260 °C useable
CliptecXHS 280
Hochtemperatur- Kettenschmieröl für Folienstreckanlagen,vorzugsweise System BrücknerHigh temperature chain oils for film stretching lines,preferably Brueckner-Systems
V40: 300 mm2/s;bis +260 °C einsetzbarup to +260 °C useable
CliptecXHS 150 HT
Hochtemperatur- Kettenschmieröle für Folienstreckanlagen,vorzugsweise System Brückner.High temperature chain oils for film stretching lines,preferably Brueckner-Systems
V40: 280 mm2/s;einsetzbar / useablebis/up to 200 °C
GGllaassss LLuubbeeXHG 220
Vollsynthetisches Hochleistungsöl zur Schmierung vonHohlglasmaschinen und anderen Aggregaten zurGlasherstellung.Fully-synthetic high performance oil for lubrication of bottleglass machines and other aggregates for the glass production
ISO-VG 220;bis +240 °Ceinsetzbar / up to+240 °C useable
Chain System CleanerBR
Hochwirksamer synthetischer Schmierstoff zur Reinigungdes Schmiersystems von FolienstreckanlagenHighly effective synthetic lubricant for the cleaning of thelubrication system of film stretching lines
Viskositäten bei 40 °C in mm2/s: ca. 50, bis +150 °C einsetzbarViscosity at 40 °C in mm2/s: ca. 50, bis +150 °C useable
TURBINENÖLETURBINE OILS
ADDINOL- ProduktADDINOL- Product
ProduktbeschreibungProduct description
Spezifikation / FreigabenSpecification / Approvals
31
THE ART OF OIL • SINCE 1936
TurbinenölTurbine oilTL 32 TL 46TL 68
Turbinenöle mit gutem Korrosionsschutz- undWasserabscheideverhalten für Dampf-, Gas- undWasserturbinenTubine oils good anti-corrosion performance and water-sep-arating ability, for the application in gas, water and steamturbines
DIN 51515/1;Siemens, ABB Alstom, MAN-Energie u. a.;ISO-VG 32, 46, 68
TurbinenölTurbine oilTP 32TP 46
Turbinenöle mit verbesserten Verschleißschutzeigenschaften,vorzugsweise für Dampf- und GetriebeturbinenTurbine oils with improved wear protection characteristics,preferably for the application in steam-gear turbines
DIN 51515/1;Siemens TLV 90 1304/01 (TP32); Alstom HTGD 90117 (TP32); ISO-VG 32, 46
TurbinenölTurbine oilTG 32 EPTG 46 EP
Für thermisch hochbelastete Gasturbinen mit und ohneGetriebeFor highly thermal loaded gas turbines with and withoutgears
DIN 51515/2;RBOT-TEST, einschließlich dermodifizierten Variante / includ-ing the modified variants
UMLAUFÖLECIRCULATING OILS
ADDINOL- ProduktADDINOL- Product
ProduktbeschreibungProduct description
Spezifikation / FreigabenSpecification / Approvals
SchmierölLuboilC 10 - C 220
Schmieröle ohne Zusätze zur Schmierung von Maschinenund Anlagen mit Durchlauf- und Umlaufsystemen ohnebesondere BelastungenLubrication without additives for the lubrication of machineryand installations with passing and circulating systemswithout special loading
DIN 51517/1;DIN 51506 - VB, VC;L-AN DIN 51501;
SchmierölLuboilCL 22- CL 220
Schmieröle für die Schmierung von hoch beanspruchtenUmlaufsystemen sowie Industriegetrieben geringer bis mit-tlerer BelastungLubricating oils for the lubrication of heavy-duty circulatingsystems as well as industrial gears with low to mediumloading
DIN 51517/2; DIN 51524/1 (HL);DIN 51506 - VBL;
UMWELTSCHONENDE SCHMIERSTOFFEENVIRONMENT-FRIENDLY LUBRICANTS
32
THE ART OF OIL • SINCE 1936
ADDINOL- ProduktADDINOL- Product
ProduktbeschreibungProduct description
SeitePage
Ökoplus / EcoplusXT 15
FormentrennölMoulding release oil
13
Ökoplus / EcoplusXS 68
SägekettenhaftölChain saw oil
17
ÖkoplusEcoplusXT U
Formentrennöl (Sichtbetonflächen)Moulding release oil (pore-poor exposed concrete areas)
13
Ökoplus / EcoplusX 46 LX 100 L
LagerschmierölBearing lubricant
19
Ökoplus / EcoplusHETG 32-68
Hydraulikflüssigkeit auf PflanzenölbasisHydraulic fluid based on vegetable oil
15
Ökosynth / EcosynthHEES 22, 46
Synthetische Hydraulikflüssigkeiten (Ester-Basis)Synthetic hydraulic fluids (based on ester)
15
Ökosynth SuperEcosynth Super HEES 46 S
Synthetische Hydraulikflüssigkeiten (gesättigter Ester-Basis)Synthetic hydraulic fluids (based on ester)
15
Super Synth 2 TMZ 408
2T Motorenöl für thermisch hochbelastete luft- und wassergekühlte Motoren, für sehrhohe TemperaturenTwo-stroke engine oil for highly thermal loaded air and water cooled engines, for anysmall machinery with air-cooled stroke engines operating at an extreme high-speed level
9
Biosynth 2 TMZ 407
2T Motorenöl, besonders geeignet für BootsmotorenTwo-stroke engine oil, particularly suitable for boat engines
9
Ökoplus BG 2 Frost- und Korrosionsschutzfett sowie zur Schmierung von Gleit- und WälzlagernFrost and corrosion protection grease as well as for lubrication of sliding and rolling bearings
28
Spurkranzfett GFlange Grease G
SpurkranzfettFlange grease
25
VAKUUMPUMPENÖLEVACUUM PUMP OILS
ADDINOL- ProduktADDINOL- Product
ProduktbeschreibungProduct description
Spezifikation / FreigabenSpecification / Approvals
VakuumpumpenölVacum pump oilXVR 110
Eng geschnittenes Mineralölraffinat mit niedrigemDampfdruckMineral oil raffinate of narrow boiling range with low vapourpressure
erfüllt die Forderungen führen-der Vakuumpumpenherstellerfulfills the requirements ofleading vacuum pumpmanufacturerV40 ca. 100 mm2/s
VERDICHTERÖLECOMPRESSOR OILS
ADDINOL- ProduktADDINOL- Product
ProduktbeschreibungProduct description
Spezifikation / FreigabenSpecification / Approvals
33
THE ART OF OIL • SINCE 1936
VerdichterölCompressor oilV 100 … V 320
Alterungsbeständige Mineralölraffinateohne Zusätze.Ageing resistant mineral oil raffinateswithout additives.
DIN 51506 - VB (V 100 - V 320), VC (V 100, V 150);DIN 51517/1 (C)
VerdichterölCompressor oilVL 100 … VL 320
Alterungsbeständige Mineralölraffinatemit aschehaltigen Zusätzen.Ageing resistant mineral oil raffinateswith ash-containing.
DIN 51506 - VBL (VL 100 - VL 320), VCL (VL 100, VL150);API CC SAE 30 (VL 100) SAE 40 (VL 150);
VerdichterölCompressor oilVDL 32 … VDL 150
Alterungsbeständige Mineralölraffinatemit aschefreien Zusätzen;Verdichtungsendtemperatur bis220 °C. (VDL 32-68, teilsynthetisch,vorzugsweise für Schraubenver-dichter)Ageing resistant mineral oil raffinateswith ash-free additives, compressionend temperatures up to 220 °C. (VDL32-68, semi-synthetic, particularly forscrew compressors)
DIN 51506;VDL 32-68 erfüllt Lagerverschleißprüfung FAG;VDL 100, 150 geprüft vom TÜV, EssenVDL 32-68 fulfills bearing wear examination FAG; VDL100, 150 examined by the TÜV, Essen
VerdichterölCompressor oilVDL 32 SVDL 46 SVDL 68 S
Vollsynthetische Verdichteröle, speziellfür Schraubenkompressoren,Verdichtungsendtemperatur bis 220 °CFully-synthetic compressor oils forscrew compressors, compression endtemperatures up to 220 °C
DIN 51506
WÄRMETRÄGERÖLEHEAT TRANSFER OILS
ADDINOL- ProduktADDINOL- Product
ProduktbeschreibungProduct description
Spezifikation / FreigabenSpecification / Approvals
WärmeträgerölHeat transfer oilXW 15XW 27
Vollsynthetische Wärmeträgeröle;Vorlauftemperaturen bis 300 °C(320 °C kurzzeitig und in geschlosse-nen Systemen ohne Sauerstoffzutritt)Fully-synthetic heat-transfer oils; filmtemperatures up to 300 °C(short-time usage up to 320 °C and inclosed systems without oxygenaccess)
DIN 51522;V40 ca. 23 mm2/s (XW 15)V40 ca. 45 mm2/s (XW 27)
WärmeträgerölHeat transfer oilXW 30 M 250
Wärmeträgeröl auf Mineralölbasis,Vorlauftemperatur bis ca. 250 °CHeat transfer oils based on mineral oil,film temperature up to approx. 250 °C
DIN 51522, Q;V40 ca. 30 mm2/s
ZYLINDERÖLECYLINDER OILS
ADDINOL- ProduktADDINOL- Product
ProduktbeschreibungProduct description
34
THE ART OF OIL • SINCE 1936
ZylinderölCylinder oil Z 1000Z 1500
Hochviskose Mineralöle für den Einsatz in Dampfmaschinen;Dampftemperaturen bis 325 °C (Z 1000) bis 380 °C (Z 1500)High-viscosity mineral oils; application in steam engines atvapour temperatures up to 325 °C (Z 1000)up to 380 °C (Z 1500)
Schmieröle ZB bzw. ZD nachDIN 51510;ISO-VG 1000 bzw. 1500Luboil ZB and/or ZD accordingDIN 51510;ISO-VG 1000 and/or 1500
KFZ- FUNKTIONSFLÜSSIGKEITENAUTOMOTIVE FUNCTION FLUID
ADDINOL- ProduktADDINOL- Product
ProduktbeschreibungProduct description
Spezifikation / FreigabenSpecification / Approvals
Brake Fluid Vollsynthetische BremsflüssigkeitFully-synthetic brake fluid
DOT 4, FMVSS 116,SAE J 1703, ISO 4925
Antifreeze Super Hochwertiges nitrit-, amin- und phosphat- freiesKühlerschutzmittelkonzentrat auf Basis Ethylenglykol.Aussehen: blau-grün,High-quality cooler-protecting agent on the basis of ethyleneglycol, free of nitrite, amine and phosphate, appearance:blue-green
BMW N 600 69.0; MAN 324NF; MB 325.0; MTU MTL 5048;Opel B 040 0240; Porsche TL774-C; Saab 6901 599; ScaniaTB 1451; VW/Audi/ Seat /Skoda TL 774-C (G 11)
Antifreeze Nitrit-, amin- und phosphatfreiesKühlerschutzmittelkonzentrat auf Basis Ethylenglykol.Aussehen: blau-grün.Cooler-protecting agent on the basis of ethylene glycol, freeof nitrite, amine and phosphate, appearance: blue-green
Antifreeze G 12 Silikat-, nitrit-, amin- und phosphat- freiesKühlerschutzmittelkonzentrat auf Basis Ethylenglykol beson-ders für Hochleistungs-Alu-Motoren geeignet.Aussehen: rotHigh-quality product, especially suitable for the applicationin high-performance engines made of aluminium;free of silicate, nitrite, amine and phosphate; cooler-protect-ing agent on the basis of ethylene glycol. Appearance: red
MAN 324 SNF; MB 325.3;Audi; Seat; Skoda; VW TL 774-D/F (G 12+);Ford WSS-M 97B44-D;Porsche TL 774-D; MTU MTL5048
Screen Wash Scheibenreinigerkonzentrat mit Frostschutz bis -75 °C,Apfelduft.Screen-cleaning concentrate with anti-freeze down to -75 °C,smell: apple-like.
Spezifikation / FreigabenSpecification / Approvals
35
THE ART OF OIL • SINCE 1936
ADDINOL Lube Oil GmbHHigh-Performance Lubricants
Am Haupttor, D-06237 LeunaTelefon: +49(0)3461/845-111,Telefax: +49(0) 3461/845-555, Email: [email protected],Internet: www.addinol.de
Sta
nd /
Issu
e08
/05