Diss Hinnerk Werner 09 06 2011 Endfassung A5 · 2019. 9. 8. · Hinnerk Bernhard Werner aus Buchen...
Transcript of Diss Hinnerk Werner 09 06 2011 Endfassung A5 · 2019. 9. 8. · Hinnerk Bernhard Werner aus Buchen...
Aus der
Klinik für Kleintiere
der Veterinärmedizinischen Fakultät der Universität Leipzig
Sensitivität und Spezifität von Arthroskopie und dr eidimensional
rekonstruierten CT-Modellen zur Bestimmung der radi oulnaren Inkongruenz
am kaninen Ellbogengelenk: eine In-vitro-Studie
Inaugural-Dissertation
zur Erlangung des Grades eines
Doctor medicinae veterinariae (Dr. med. vet.)
durch die Veterinärmedizinische Fakultät
der Universität Leipzig
eingereicht von
Hinnerk Bernhard Werner
aus Buchen
Leipzig, 2011
Mit der Genehmigung der Veterinärmedizinischen Fakultät der Universität Leipzig
Dekan: Prof. Dr. Uwe Truyen
Betreuer: Dr. habil. Peter Böttcher
Gutachter: Dr. habil. Peter Böttcher, Klinik für Kleintiere,
Veterinärmedizinische Fakultät, Universität Leipzig
Dr. habil. Johann Maierl, Lehrstuhl für Tieranatomie,
Tierärztliche Fakultät, Ludwig-Maximilians-Universität München.
Tag der Verteidigung: 07.06.2011
Meiner Familie und meinen Freunden
Inhaltsverzeichnis
I
Inhaltsverzeichnis
1 EINLEITUNG 1
2 LITERATURÜBERSICHT 3
2.1 Anatomie und Biomechanik des Ellbogengelenkes 3
2.2 Ätiologie und Pathogenese der Ellbogengelenksdy splasie 4
2.3 Inkongruenzen des Ellbogengelenkes 5
2.3.1 Definition und Bedeutung 5
2.3.1.1 Humeroulnare Inkongruenz 6
2.3.1.2 Traditionelles Modell der radioulnaren Inkongruenz 6
2.3.1.3 „Angular-Vektor Modell“ der radioulnaren Inkongruenz 7
2.4 Bildgebende Verfahren 8
2.4.1 Radiologische Untersuchung 9
2.4.2 Computertomographie 11
2.4.3 Arthroskopie 13
3 PUBLIKATIONEN 16
3.1 Visual estimation of radioulnar incongruence in dogs using three-
dimensional image rendering: an in vitro study base d on computed
tomographic imaging 16
3.2 Sensitivity and specificity of arthroscopic est imation of positive and
negative radio-ulnar incongruence in dogs: an in vi tro study 40
4 DISKUSSION 58
5 ZUSAMMENFASSUNG 64
6 SUMMARY 66
7 LITERATURVERZEICHNIS 68
Abkürzungsverzeichnis
Abkürzungsverzeichnis
AVM Angular-Vector-Model
CT Computertomographie
ED Ellbogengelenksdysplasie
ICC Intraklassen-Korrelationskoeffizient
FPC Fragmentierter Processus coronoideus medialis ulnae
IPA Isolierter Processus anconaeus
KI Konfidenzintervall
MPC Processus coronoideus medialis ulnae
OCD Osteochondrosis dissecans
RUI radioulnare Inkongruenz
Einleitung
1
1 Einleitung
Erkrankungen des Ellbogengelenkes und insbesondere die Ellbogengelenks-
dysplasie (ED) sind eine der häufigsten Lahmheitsursachen der Vordergliedmaße bei
jungen Hunden schnellwüchsiger Rassen (KIRBERGER und FOURIE 1998,
JANUTTA et al. 2006). Nach Definition der International Elbow Working Group um-
fasst der Begriff ED eine Gruppe von Erkrankungen, der unter anderem der
fragmentierte Processus coronoideus medialis ulnae (FPC), der isolierte Processus
anconaeus (IPA) und die Osteochondrosis dissecans (OCD) zugeordnet werden
(WIND 1986).
Es handelt sich um ein multifaktorielles Geschehen (VAN RYSSEN und VAN
BREE 1997, BLOND et al. 2005, DANIELSON et al. 2006, SAMOY et al. 2006,
GEMMILL und CLEMENTS 2007), wobei Inkongruenzen der radioulnaren Gelenk-
fläche mit mechanischer Überlastung des medialen Gelenkabschnittes eine Haupt-
rolle zu spielen scheinen (SAMOY et al. 2006, GEMMILL und CLEMENTS 2007).
Bezüglich des Typs der radioulnaren Inkongruenz (RUI) haben sich zwei Modell-
vorstellungen etabliert. Das traditionelle Modell geht von einer relativen Radius-
verkürzung beziehungsweise Ulnaverlängerung aus, die durch ein asynchrones
Längenwachstum beider Knochen hervorgerufen wird (WIND 1986). Die damit ver-
bundene RUI wird als positive radioulnare Stufe bezeichnet und führt durch den
Verlust des radiohumeralen Gelenkschlusses zu der bereits erwähnten bio-
mechanischen Überlastung der medialen Gelenkanteile, insbesondere des
Processus coronoideus medialis ulnae (MPC). In Erweiterung des traditionellen
Modells geht das „Angular-Vector-Model“ von einer rotatorischen Instabilität der
Humeruskondyle aus, wodurch sowohl die Verkürzung des Radius als auch die Ver-
kürzung der Ulna (negative RUI) zu einer Überbelastung des medialen Kompart-
ments und hier vor allem des MPC führen (LOZIER 2006).
Einleitung
2
Klinisch stellt sich die Frage, ob neben der Behandlung der lokalen Gelenk-
schäden (FPC, OCD) weitere Eingriffe, wie z.B. die Radiusverkürzung, beziehungs-
weise –verlängerung oder eine dynamische proximale Ulnaosteotomie sinnvolle
Ergänzungen darstellen. Solche Methoden zielen darauf ab, eine bestehende RUI zu
korrigieren, weshalb es von zentraler Bedeutung ist, den Typ und das Ausmaß einer
möglichen RUI mit hoher Zuverlässigkeit zu diagnostizieren. Bisherige Studien die
sich in-vivo und in-vitro mit Röntgen und Computertomographie (CT) als bildgebende
Verfahren dazu befasst haben, zeigen, dass die Anzahl falsch positiver und negativer
Diagnosen hoch ist (MASON et al. 2002, BLOND et al. 2005, HOLSWORTH et al.
2005, KRAMER et al. 2006). Die Arthroskopie des Ellbogengelenkes erlaubt zumin-
dest in-vitro die präzise Detektion einer positiven RUI (WAGNER et al. 2007), ist aber
gleichzeitig aufgrund der mit ihr verbundenen Invasivität kaum für Screening-
untersuchungen geeignet. Davon unabhängig haben alle bisherigen Untersuchungen
zur RUI nur die traditionelle Modellvorstellung einer relativen Radiusverkürzung
(positive RUI) berücksichtigt. Aussagen zur diagnostischen Sicherheit bezüglich der
Diagnose einer negativen RUI (relative Ulnaverkürzung) liegen nicht vor.
Ziel der vorliegenden Studie war es deshalb die Ellbogengelenksarthroskopie
auch für eine negative RUI zu evaluieren. Zudem sollte in Erweiterung zwei-
dimensionaler CT-Untersuchungen die diagnostische Sicherheit dreidimensionaler
CT basierter Computermodelle des Ellbogengelenkes für beide Formen der RUI
bestimmt werden. Beide Untersuchungen wurden in-vitro anhand eines Stufen-
modells des Ellbogengelenkes durchgeführt.
Literaturübersicht
3
2 Literaturübersicht
2.1 Anatomie und Biomechanik des Ellbogengelenkes
Das Ellbogengelenk ist ein zusammengesetztes Gelenk, das den Oberarm mit
dem Unterarm verbindet (siehe Abb. 1). Hierbei artikulieren die Trochlea humeri und
das Capitulum humeri des Condylus humeri mit den proximalen Enden der Ulna und
des Radius. Zu unterscheiden sind die Articulatio humeroradialis, die Articulatio hu-
meroulnaris und die Articulatio radioulnaris proximalis (NICKEL et al. 1992). Die Ulna
überragt mit dem Olekranon den Radius und bildet proximal das Tuber olecrani. Am
Tuber olecrani befindet sich kranial der Processus anconaeus, von dem aus die
Incisura trochlearis nach distal zieht. Ihre konkave Gelenkfläche artikuliert mit dem
Humerus. Der distale Abschnitt der Incisura trochlearis erweitert sich nach lateral und
medial zu den Kronfortsätzen, dem Processus coronoideus lateralis ulnae und dem
Processus coronoideus medialis ulnae (MPC). Letzterer artikuliert mit dem medialen
Anteil des Condylus humeri, der Trochlea humeri und kann in drei Abschnitte unter-
teilt werden. Kranial befindet sich die Apex, welche über einen mittleren Abschnitt
dann kaudal in den dritten Abschnitt, die Basis, übergeht (GEMMILL et al. 2006,
KRAMER et al. 2006, WAGNER et al. 2007). In der Articulatio radioulnaris proximalis
artikulieren die Circumferentia articularis des Radius mit der Incisura radialis der Ulna
(ELLENBERGER und BAUM 1974). Die Beteiligung verschiedener Gelenkanteile
lässt erahnen, dass eine ungestörte Funktionalität dieses komplexen Gelenkes eine
akkurate Passgenauigkeit der einzelnen Gelenkanteile voraussetzt (SAMOY et al.
2006).
Im Hinblick auf die Biomechanik des Ellbogengelenkes ist eine Kongruenz und
damit die Funktionalität des Scharniergelenkes nur gewährleistet, wenn das
Längenwachstum von Ulna und Radius aufeinander abgestimmt ist. Die Wachstums-
leistung des Radius geht zu 25-40% von der proximalen und zu 60-75% von der
distalen Epiphysenfuge aus (CARRIG und MORGAN 1975). Bei der Ulna bestimmt
Literaturübersicht
4
die distale Epiphysenfuge mit 80-85% das Längenwachstum, die proximale Apo-
physenfuge dient der Ausbildung des Olekranons und hat nur einen geringen Anteil
von 15-20% am Längenwachstum der Ulna (HENSCHEL 1972, FOX et al. 1983,
WEIGEL 1987).
Abbildung 1: Anatomische Darstellung des Ellbogengelenkes
1 Humerus, 2 Radius, 3 Ulna;
2.2 Ätiologie und Pathogenese der Ellbogengelenksd ysplasie
Die Ätiopathogenese der Ellbogengelenksdysplasie (ED) ist bislang noch nicht
restlos geklärt. Eine der Hauptursachen scheinen Inkongruenzen der Gelenkfläche
zu sein, welche zu einer chronischen mechanischen Überlastung des Gelenkes füh-
ren (WIND 1986, OLSSON 1987, DANIELSON et al. 2006, SAMOY et al. 2006,
GEMMILL und CLEMENTS 2007). Der Grad der Inkongruenz kann stark variieren, so
dass unterschiedliche Veränderungen im Ellbogengelenk auftreten. Bei geringer
Inkongruenz werden Veränderungen des Knorpels festgestellt, bei stärkerer
Inkongruenz können knöcherne Veränderungen nachgewiesen werden (WIND und
PACKARD 1986). Das Ausmaß der Veränderungen ist nicht nur abhängig vom Grad
der Ausprägung der Inkongruenz, sondern auch vom Entwicklungsstadium des
Literaturübersicht
5
Ellbogengelenkes zum Zeitpunkt des schädigenden Insultes (OLSSON 1987). Man
geht davon aus, dass multiple Faktoren zur Ausbildung von Inkongruenzen des
EIlbogengelenkes führen können (SAMOY et al. 2006, WAGNER et al. 2007). So
können Wachstumsstörungen des Radius, beziehungsweise der Ulna zu Deformati-
onen sowohl des Unterarms als auch der angrenzenden Gelenke führen
(SJOSTROM et al. 1995). Diese Störungen können durch Traumata der Wachstums-
fugen, hypertropher Osteodystrophie oder persistierende Knorpelzapfen ausgelöst
werden. Sie führen neben klinisch und radiologisch nachweisbaren Achsen-
abweichungen in Form von Valgus- oder Varusstellungen der Vordergliedmaßen zu
einer Fehlstellung und –belastung im Ellbogengelenk, was degenerative Ver-
änderungen hervorrufen kann. Rassen wie z.B. Labrador Retriever, Berner Sennen-
hund oder Rottweiler und hier vor allem die männlichen Tiere sind von Ellbogen-
gelenksinkongruenzen deutlich häufiger betroffen (GUTHRIE und PIDDUCK 1990,
PADGETT et al. 1995, POLIKEIT et al. 2007). Dieser Umstand lässt eine genetische
Prädisposition vermuten. Auch humeroulnare Inkongruenzen, die durch Formverän-
derungen der Incisura ulnaris hervorgerufen werden, konnten vermehrt bei großen
Hunderassen nachgewiesen werden (WIND 1986, BRUNNBERG et al. 1999). Nutri-
tiv bedingte Störungen der enchondralen Ossifikation in Form eines persistierenden
Knorpelzapfens der Ulna treten ebenfalls vorrangig bei grosswüchsigen Rassen auf-
grund von Imbalancen im Kalzium-Phosphat-Haushalt auf (GRONDALEN 1982,
HAZEWINKEL 2004). Dies kann bei den betroffenen Hunden über die Ausbildung ei-
nes Radius-Curvus-Syndroms zur Ellbogengelenksinkongruenz führen.
2.3 Inkongruenzen des Ellbogengelenkes
2.3.1 Definition und Bedeutung
Die Inkongruenz des Ellbogengelenkes beschreibt einen Zustand, in dem Ulna,
Radius und Humerus mit ihren beteiligten Gelenkflächen nur suboptimal ineinander-
Literaturübersicht
6
greifen (SAMOY et al. 2006). Entsprechend werden eine humeroulnare Inkongruenz
und eine radioulnare Inkongruenz (RUI) unterschieden (OLSON et al. 1979, OLS-
SON 1981, WIND 1986, KIRBERGER und FOURIE 1998, SAMOY et al. 2006,
WAGNER et al. 2007, HAZEWINKEL 2008).
2.3.1.1 Humeroulnare Inkongruenz
Eine ellipsenförmige Ausbildung der Incisura trochlearis ulnae führt dazu, dass
der Durchmesser der Gelenkfläche im Vergleich zur kreisrunden Kontur der humera-
len Kondyle zu klein ist (siehe Abb. 2B) (WIND 1986). HAZEWINKEL (2008) weist
darauf hin, dass diese Form der Inkongruenz durch eine unterentwickelte oder
schlichtweg zu kleine Incisura trochlearis ulnae bedingt sein kann. Allgemein wird
aber davon ausgegangen, dass diese Form der Inkongruenz nur selten Ursache für
eine vorliegende ED ist (KIRBERGER und FOURIE 1998).
2.3.1.2 Traditionelles Modell der radioulnaren Inko ngruenz
Die positive, beziehungsweise negative Stufenbildung zwischen der gemeinsam
gebildeten Gelenkfläche von Ulna und Radius galt lange Zeit als der wichtigste ätio-
logische Faktor der Ellbogengelenksinkongruenz und wird als „traditionelles Modell“
der RUI beschrieben (WIND 1986). Dabei wird angenommen, dass es infolge einer
Verkürzung des Radius („short radius“ bzw. positive RUI (siehe Abb. 2C)) zu einer
mechanischen Druckerhöhung im Bereich des MPC und der humeralen Trochlea
kommt (PRESTON et al. 2001). Dies wurde bislang als Erklärung für die Entstehung
eines fragmentierten Processus coronoideus medialis ulnae (FPC) herangezogen. Im
Falle einer verkürzten Ulna („short ulna“) resultiert eine negative RUI (siehe Abb. 2D),
welche eine Druckerhöhung zwischen Processus. anconaeus und Humeruskondyle
bewirkt und somit die Entstehung eines isolierten Processus anconeus (IPA) erklärt
(SAMOY et al. 2006).
Literaturübersicht
7
A B
C D
Abbildung 2: Schematische Darstellung der Ellbogengelenksinkongruenzen entnommen
aus SAMOY und Mitarbeiter (2006)
A – gesundes Ellbogengelenk mit 1. Humerus, 2. Ulna, 3. Radius und 4. Incisura trochlea-
ris ulnae; B – Inkongruenz bedingt durch elliptische Incisura trochlearis ulnae; C – Inkon-
gruenz bedingt durch einen verkürzten Radius (positive Stufenbildung); D – Inkongruenz
bedingt durch eine verkürzte Ulna (negative Stufenbildung)
2.3.1.3 „Angular-Vector-Model“ der radioulnaren In kongruenz
Auch wenn die Entstehung von FPC und IPA mit dem traditionellen Modell erklärt
werden kann, bleibt die Koexistenz eines IPA und eines FPC in ein und demselben
Gelenk unklar, da in einem solchen Fall eine relative Ulna- und eine relative Radius-
verkürzung vorliegen müssten (KIRBERGER und FOURIE 1998, MEYER-
LINDENBERG et al. 2006). Um diese Einschränkung des traditionellen Modells zu
überwinden, entwickelte LOZIER (2006) das sogenannte „Angular-Vector-Model“
(AVM). Dieses berücksichtigt neben negativer und positiver RUI eine rotatorische In-
stabilität des Humeruskondylus, wodurch sowohl eine relative Verkürzung des Radi-
us als auch der Ulna zu einer Überbelastung des medialen Kompartments und hier
vor allem des MPC führt. So werden von LOZIER (2006) zwei Hauptszenarien be-
schrieben:
Literaturübersicht
8
I. Der Fall des „short radius“
In diesem, nach LOZIER (2006) eher seltener vorkommenden Fall, weichen die
Betrachtungsweise der Ätiopathogenese nach dem traditionellen Modell und dem
AVM nicht voneinander ab. Auch er geht davon aus, dass es zu einer relativen Ver-
kürzung des Radius kommt und in der Folge der MPC mechanisch überlastet wird.
Eine Innenrotation des Oberarms und eine dezente Valgusstellung des Ellbogenge-
lenkes sollen LOZIER (2006) zufolge die Fehlbelastung noch begünstigen.
II. Der Fall der „short ulna“
Bei übermäßiger Längenzunahme des Radius wird eine proximal gerichtete
Schubkraft auf den lateralen Anteil der Humeruskondyle ausgeübt. Im Zuge dieser
Verschiebung stößt der zentrale Anteil der Humeruskondyle gegen den Processus
anconeus, wodurch dieser zu einem Drehpunkt wird. Dadurch ergibt sich, dass der
mediale Anteil der Kondyle nach distal gedrückt wird und es somit zu einer Fragmen-
tierung des MPC und/oder einer Osteochondrosis dissecans (OCD) im Bereich der
medialen Humeruskondyle kommen kann. Nach LOZIER (2006) sind die beschrie-
benen Prozesse im Fall der „short ulna“ der häufigste Grund für Läsionen des MPC.
Folgt man der Pathogenese nach dem AVM, ist das Vorkommen der verschiedenen
Ellbogenpathologien, wie IPA, FPC und/oder OCD in ein und demselben Gelenk
plausibel.
2.4 Bildgebende Verfahren zur Bestimmung einer Ellb ogengel-
kenksinkongruenz
Röntgenaufnahmen sind für die Beurteilung der knöchernen Anteile des
Ellbogengelenkes hilfreich, liefern jedoch kaum Informationen über die chondralen
und juxtaartikulären Gelenkanteile. Die CT liefert zwar einen besseren Kontrast, den-
noch jedoch können hyaliner Knorpel und Faserknorpel ebenfalls nicht dargestellt
Literaturübersicht
9
werden (PAVLOV et al. 1979, SINGSON et al. 1986, HERZOG 1993). In der
Humanmedizin wird wegen der guten Darstellung dieser Weichteilstrukturen die
Magnetresonanztomographie (MRT) eingesetzt (TYRRELL et al. 1988, HAYES und
CONWAY 1992, HERON und CALVERT 1992, KRAMER et al. 1992, POTTER et al.
1997, WEISHAUPT et al. 1999). Beim Hund konnte sich die MRT-Untersuchung hin-
sichtlich der Bestimmung von Ellbogengelenksinkongruenzen aufgrund von techni-
schen Einschränkungen bisher nicht durchsetzen (SNAPS et al. 1997, SNAPS et al.
1998). Die arthroskopische Untersuchung des Ellbogengelenkes hingegen erlaubt
eine direkte Visualisierung und Palpation der intraartikulären Strukturen
(VAN RYSSEN et al. 1993b).
2.4.1 Radiologische Untersuchung
Radiologische Untersuchungen des Ellbogengelenkes zur Diagnostik einer RUI
wurden von HAZEWINKEL und Mitarbeiter (1996) als Screeninguntersuchung bei
Rassen mit einer hohen Prädisposition für ED empfohlen. Im Allgemeinen werden
drei Standardprojektionen, eine mediolateral gebeugte und eine gestreckte sowie ei-
ne Schrägaufnahme in kraniomedio-kaudolateraler Richtung, angeraten
(BRUNNBERG et al. 1999, MASON et al. 2002). Neben der klassischen Stufen-
bildung zwischen Radius und Ulna wurden weitere Merkmale beschrieben, die im
Röntgenbild auf das Vorliegen einer Ellbogengelenksinkongruenz hinweisen: eine
elliptische Kontur der Incisura trochlearis ulnae, ein erweiterter Gelenkspalt sowie
eine Verlagerung der Humeruskondyle nach kranial (WIND 1986, BRUNNBERG et
al. 1999). Weiterhin sind Arthrosen im Ellbogenbereich ein Hinweis auf bestehende
Inkongruenzen. So konnten KELLER und Mitarbeiter (1997) eine enge Korrelation
zwischen dem Schweregrad der Inkongruenz und dem der sekundären Arthrose auf-
zeigen. Die sekundäre Arthrosebildung wird mit einer Instabilität des inkongruenten
Gelenkes und den damit verbundenen Veränderungen an Knochen und Knorpel so-
wie der erhöhten Zugbelastung an den Insertionsstellen der Gelenkskapsel erklärt
Literaturübersicht
10
(MORGAN et al. 1999, SAMOY et al. 2006). Neuere Untersuchungen zeigen jedoch,
dass Röntgenuntersuchungen zur Diagnostik einer positiven RUI sowohl eine relativ
schlechte Sensitivität als auch Spezifität erzielen (MASON et al. 2002, BLOND et al.
2005). Dies erklärt sich in der Schwierigkeit der radiologischen Beurteilung eines
dreidimensionalen Gelenks in einer zweidimensionalen Projektion. Erschwert wird
die Beurteilung durch Überlagerungen und dem Einfluß der Lagerung (MURPHY et
al. 1998). MASON und Mitarbeiter (2002) konnten eine mediane Spezifität von 0,86
in der lateralen Projektion und von 0,82 in der kranio-kaudalen Projektion erreichen.
Die mediane Sensitivität lag bei den genannten Projektionen bei 0,78 beziehungs-
weise 0,79. Eine positive RUI größer als 1,5 mm wurde mit einer Sensitivität von 0,90
erkannt. WIND und PACKARD (1986a, 1986b) geben ähnliche Größen der röntgeno-
logisch detektierbaren RUI an. Im Gegensatz zu MASON und Mitarbeiter (2002) ge-
hen sie aber davon aus, dass dies nur mit sehr guter Röntgentechnik möglich ist.
Dem widersprechen BLOND und Mitarbeiter (2005) indem sie zeigen konnten, dass
trotz gut gelagerter Röntgenaufnahmen gesunde Gelenke als inkongruent diagnosti-
ziert wurden. Zudem ergaben ihre Untersuchungen, dass eine Projektion des Zent-
ralstrahls unmittelbar kaudal des medialen Epikondylus, die Detektionsrate einer RUI
erhöht und somit die Röntgentechnik einen entscheidenden Einfluss auf die Genau-
igkeit der Diagnostik hat. Die Autoren kommen weiterhin zu dem Schluss, dass
Röntgenuntersuchungen eine zufriedenstellende bis exzellente Sensitivität und
Spezifität zur Bestimmung einer mittel- bis hochgradigen RUI (positive Stufenbildung
von 2 mm oder mehr) ermöglichen. Zugleich zeigt dies aber, dass die klassische
Radiologie für die Diagnostik dezenterer Inkongruenzgrade nur bedingt geeignet ist.
Literaturübersicht
11
Abbildung 3: Radiologische Untersuchung im latero-lateralen Strahlengang
L – linkes Ellbogengelenk ohne erkennbare radioulnare Inkongruenz, R – rechtes Ellbo-
gengelenk mit positiver radioulnarer Inkongruenz (verkürzter Radius, positive Stufenbil-
dung von > 2mm)
2.4.2 Computertomographie
Mit der veterinärmedizinischen Nutzung von Computertomographen in den acht-
ziger Jahren des 20. Jahrhunderts konnten im Gegensatz zur konventionellen
Radiographie lagerungsbedingte Artefakte reduziert und Überlagerungen vermieden
werden. Deshalb sind bis heute CT-Untersuchungen zur Diagnostik von
Koronoiderkrankungen gut etabliert (CARPENTER et al. 1993, BRADEN et al. 1994,
KÖRBEL et al. 2001, ROVESTI et al. 2002, COOK und COOK 2009). Auch in Bezug
auf die Bestimmung einer Ellbogengelenksinkongruenz ist die CT besser geeignet
als das traditionelle Röntgen (BOULAY 1998, BRUNNBERG et al. 1999, REICHLE et
al. 2000), wodurch sie zum defacto Standard in der klinischen Praxis geworden ist
(GIELEN et al. 2004, HULSE 2004, GEMMILL et al. 2005, HOLSWORTH et al. 2005,
GEMMILL et al. 2006, KRAMER et al. 2006, WAGNER et al. 2007).
Literaturübersicht
12
Die computertomographische Bestimmung einer RUI basiert meist auf dorsalen
oder sagittalen Rekonstruktionen der ursprünglichen transversalen Bildserie
(REICHLE et al. 2000, GIELEN et al. 2004, GEMMILL et al. 2005, HOLSWORTH et
al. 2005, GEMMILL et al. 2006, KRAMER et al. 2006, TROMBLEE et al. 2007,
WAGNER et al. 2007, COOK und COOK 2009). Allerdings kommen einzelne Studien
zu widersprüchlichen Ergebnissen bezüglich der optimalen Darstellung einer RUI. So
ergab die Untersuchung von GEMMILL und Mitarbeiter (2005), dass eine RUI vor al-
lem an der Spitze des MPC nachweisbar ist. Im Bereich der Basis konnten sie
weder in den dorsalen noch in den sagittalen Rekonstruktionen eine RUI nachvoll-
ziehen. Dagegen stellten KRAMER und Mitarbeiter (2006) insbesondere im Bereich
der Basis eine RUI fest.
Die hohe diagnostische Sicherheit der CT im Hinblick auf eine positive RUI in der
Studie von HOLSWORTH und Mitarbeiter (2005), wurde durch die Folgearbeit von
WAGNER und Mitarbeiter (2007) in Frage gestellt. Im Gegensatz zu HOLSWORTH
und Mitarbeiter (2005), welche eine sehr gute Korrelation (R2 = 0,825) der CT-
Messungen mit dem tatsächlichen Zustand der radioulnaren Gelenkkonformation
festgestellt hatten, kommen WAGNER und Mitarbeiter (2007) auf eine Sensitivität
von 0,86 bei einer Spezifität von nur 0,46. Da die Feststellung einer RUI in der klini-
schen Praxis möglicherweise mit einer Korrekturosteotomie verbunden ist, sind 54%
falsch-positive Befunde eine unakzeptable Fehlerquote.
Eine mögliche Erklärung für die widersprüchlichen Ergebnisse bezüglich der
optimalen Darstellung einer RUI in der CT könnten lagerungsbedingte Veränderun-
gen der radioulnaren Gelenkkonformation sein, welche eine RUI vorspiegeln bzw.
eine vorhandene RUI verschleiert. Insbesondere Pronation und Supination des
Unterarmes haben einen signifikanten Einfluss auf das Ausmaß der gemessenen
RUI (HOUSE et al. 2009), so dass eine standardisierte Lagerung bei neutraler
Gliedmaßenposition beachtet werden sollte (WAGNER et al. 2007, HOUSE et al.
2009). Ebenso sollte übermäßige Extension des Ellbogengelenkes während der Un-
Literaturübersicht
13
tersuchung vermieden werden, da auch dies zu einer Vergrößerung der RUI führen
kann (WAGNER et al. 2007).
Ein bedeutender Nachteil der CT von Ellbogengelenksinkongruenzen besteht
darin, dass lediglich die subchondrale Knochenoberfläche dargestellt wird (WAGNER
et al. 2007). Die Morphologie des Gelenkknorpels und somit die Gelenkoberflächen-
kongruenz werden nur indirekt beurteilt (WAGNER et al. 2007). Zudem stellt sie auf-
grund der notwendigen Narkose ein invasives Verfahren dar und eignet sich somit
kaum als Screeningverfahren (COOK und COOK 2009).
Abbildung 4: Computertomographie sagittal Schnitt: A – linkes Ellbogengelenk ohne er-
kennbare radioulnare Inkongruenz; B – rechtes Ellbogengelenk mit positiver radioulnarer
Inkongruenz (verkürzter Radius, positive Stufenbildung von > 2mm)
2.4.3 Arthroskopie
Die Arthroskopie ist eine etablierte und routinemäßig angewendete Methode zur
Diagnostik und Therapie von Ellbogenerkrankungen beim Hund (VAN RYSSEN et al.
1993b, BARDET 1997, BEALE et al. 2003). Vor allem aufgrund der technischen
Entwicklung von Arthroskopen mit kleineren Diametern war es möglich, diese
Literaturübersicht
14
Technik im kaninen Schulter-, Tarsal- und Ellbogengelenk anzuwenden (PERSON
1986, GORING und PRICE 1987, PERSON 1989, VAN RYSSEN und VAN BREE
1992, VAN RYSSEN et al. 1993a, VAN RYSSEN et al. 1993b, VAN RYSSEN et al.
1993c, BARDET 1995, VAN BREE und VAN RYSSEN 1998). Da radiologische
Befunde vor allem bei gering ausgeprägten sekundären Veränderungen am
Ellbogengelenk häufig allein nicht diagnostisch sind, hat die Arthroskopie hier eine
tragende Rolle bei der Diagnostik und Therapie von FCP und Knorpelläsionen im
Rahmen einer ED erlangt (OLSSON 1983, HENRY 1984, GUTHRIE 1989,
GRONDALEN und LINGAAS 1991, BEHRENDS 1996, VAN RYSSEN und VAN
BREE 1997, JANTHUR et al. 2000, MEYER-LINDENBERG et al. 2003). Sie bietet
die Möglichkeit, bei minimalem Weichteiltrauma große Teile der Gelenkflächen ein-
zusehen und neben der visuellen Beurteilung auch die Palpation des Gelenkknorpels
und anderer intraartikulärer Strukturen durchzuführen. Dadurch können Zusatzinfor-
mationen gewonnen werden, die zur Diagnosestellung einer Ellbogengelenks-
inkongruenz beitragen (VAN RYSSEN 2001). Charakteristische Arthroskopiebefunde
beim Vorliegen einer Ellbogengelenksinkongruenz sind unter anderem Höhenunter-
schiede zwischen Radiuskopf und Ulna, Knorpelaufwerfungen entlang des radioulna-
ren Gelenkspaltes und Knorpelverfärbungen beziehungsweise eine Chondromalazie
an Radiuskopf und im Bereich der Kronfortsätze. In der Mehrzahl der Fälle konnte
beim Vorliegen von Ellbogengelenksinkongruenzen ein FPC nachgewiesen werden
(SAMOY et al. 2006). Für die arthroskopische Beurteilung einer positiven RUI wiesen
WAGNER und Mitarbeiter (2007) eine Sensitivität von 0,97 und eine Spezifität von
0,82 nach. Bei der arthroskopischen Beurteilung von Inkongruenzen ist allerdings zu
beachten, dass es aufgrund der notwendigen Manipulationen des Gelenkes, wie
Streckung, Abduktion und Pronation sowie durch die ins Gelenk eingebrachten Gerä-
te zu iatrogenen Lageveränderungen der Gelenkflächen kommen kann, was deren
Beurteilung erschwert (MEYER-LINDENBERG et al. 2003, WAGNER et al. 2007).
Literaturübersicht
15
Aufgrund dieser Erkenntnisse erscheint es notwendig, ein standardisiertes Untersu-
chungsprotokoll anzuwenden (WAGNER et al. 2007).
Abbildung 5: Arthroskopie eines rechten Ellbogengelenkes von medial (einjähriger,
männlicher Deutscher Schäferhund mit rezidivierender Lahmheit der rechten Vorder-
gliedmaße): Adspektion und Palpation der radioulnaren Gelenkformation im Bereich der
Basis der Processus coronoideus medialis ulnae. Der Palpationshaken hat einen
Durchmesser von 1 mm und eine Länge am abgebogenen Ende von 2 mm. Es ist eine
positive radioulnare Inkongruenz von 2 mm zu erkennen.
Publikationen
16
3 Publikationen
3.1 Visual estimation of radioulnar incongruence in dogs using
three-dimensional image rendering: an in vitro stud y based on
computed tomographic imaging
Peter Böttcher, Dr. med. vet., Diplomate ECVS, Hinnerk Werner, DVM, Eberhard
Ludewig, Dr. med. vet., Diplomate ECVDI, Vera Grevel, Prof. Dr. med. vet., Diplo-
mate ECVS, Gerhard Oechtering, Prof. Dr. med. vet., Diplomate ECVAA
Veterinary Surgery 2009; 38(2): 161-168.
Objective: To determine the sensitivity and specificity of visual estimation of radio-
ulnar incongruence (RUI) in the canine elbow by use of 3-dimensional (3D) image
rendering.
Study Design: Experimentally induced negative and positive RUI.
Sample Population: Canine (> 20 kg) cadavaric right thoracic limbs (n=8).
Methods: Radial shortening and lengthening of 1 and 2 mm were performed extend-
ing an established surgical in-vitro model of RUI. Based on transverse computed
tomographic (CT) scans of each radioulnar conformation, the subchondral radioulnar
joint surface was reconstructed and visualized. A total of 64 3D models of RUI were
blindly evaluated in a random manner by 3 independent observers. RUI was esti-
mated subjectively at 1 mm precisely (-2, -1, 0, +1, +2) by visual inspection of the 3D
models.
Publikationen
17
Results: Median sensitivity for identifying an incongruent joint was 0.86. The median
specificity for identification of a congruent joint was 0.77. Analyzing the data only in
respect to a congruent joint versus one with a shortened radius (positive RUI)
resulted in a median sensitivity of 0.82, and a median specificity of 1.00. Inter-
observer agreement was 0.87. Repeatability was 0.96.
Conclusion: Estimation of positive and negative RUI based on 3D surface models of
the radioulnar articulation mimics gross inspection in a non-invasive manner, the
latter being the ultimate gold-standard for definitive diagnosis of any radioulnar step.
The proposed technique is precise, reliable and repeatable in vitro.
Clinical Relevance: Preoperative estimation of the type and degree of RUI is the
basis for deciding which type of corrective or modifying osteotomy might be best
suited to restore normal joint loads in vivo.
Introduction
The cause and pathogenesis of fragmented medial coronoid process (MCP),
osteochondrosis of the humeral trochlea as well as their advanced stages in the form
of medial compartment disease with complete loss of hyaline cartilage are poorly
understood. Traditionally, mechanical overloading because of joint incongruence has
been proposed as the most probable underlying cause.1,2 Fatigue microdamage in
the region of the MCP has been documented even in absence of obvious cartilage
degeneration3, strengthening the hypothesis of chronic supraphysiological loading of
the medial compartment in dysplastic elbows.
Proposed types of joint incongruence are mismatching of the trochlear notch of
the ulna and the humeral condyle as well as a positive step forming at the level of the
Publikationen
18
transition of the ulnar and radial joint surface. 4-8 The latter has been advocated as
the most important factor and has become the traditional model of elbow in-
congruence, in which a shortened radius results in increased mechanical pressure on
the MCP and humeral trochlea, as joint compression forces are no longer evenly
distributed between the radial and ulnar joint surfaces.8 Even though this model might
explain most of the pathology encountered in the medial compartment of dysplastic
canine elbows, the coexistence of an un-united anconeal process (UAP) with an
obviously shortened ulna and fragmented MCP in the same joint seems illogical.9
Mismatch of the trochlear notch can also hardly explain the low incidence of both
fragmented MCP and UAP in the same joint.5
Based on these obvious limitations of the traditional model of elbow in-
congruence, a more advanced model has been proposed.10 The so-called “Angular
Vector Model” considers negative as well as positive radioulnar incongruence (RUI)
as the major factors leading to physical overloading of the medial joint compartment.
Based on this, the simplification of RUI to a shortened radius (positive RUI) only,
seems questionable.11-13 The same rational would hold for any corrective or
modifying osteotomy when approaching the dysplastic elbow.8,14-18
When performing as well as evaluating such invasive procedures exact preopera-
tive as well as postoperative estimation of RUI seems imperative. Radiographic
evaluation of positive RUI has poor sensitivity and specificity.12 Computed tomo-
graphy (CT) scores far better and is considered the gold standard in clinical
practice.11,19-21 Recently, arthroscopic evaluation of positive RUI has been reported to
be of superior accuracy in vitro compared with all diagnostic imaging modalities
evaluated to date.13
Publikationen
19
Struggling with the precise, noninvasive quantification of suspected RUI, we
investigated whether the extension of 2-dimensional (2D) CT measurement in form of
3-dimensional (3D) models of the subchondral radioulnar joint surface may increase
accuracy. We also investigated positive and negative RUI to account for the more
complex understanding of elbow incongruence.10
Materials and Methods
Specimens
Right thoracic limbs of 8 mature, middle to large breed dogs (weighing > 20 kg)
with no history of lameness for the harvested limb were collected after euthanasia of
the dogs for reasons unrelated to this study. Elbow joint pathology was excluded ba-
sed on complete radiographic and CT examination, and later confirmed by elbow
joint disarticulation and inspection of the joint surfaces for visible cartilage damage.
Experimental model of RUI
RUI was experimentally induced using an in vitro model.11,12 Briefly, a 4-pin type 1
unilateral external skeletal fixator was applied to the cranial aspect of the radial
diaphysis (Fig 1). The 4 fixation pins were connected to a custom made linear side-
bar allowing both lengthening and shortening with micromillimeter accuracy. Axial
stability of the side bar as well as bending properties had been tested using a
material-testing machine up to a load of 1000 N. A 3.5 mm cortical screw was
inserted from the lateral to the medial styloid process to eliminate any axial move-
ment between the distal radius and the ulna. The inter-osseous ligament was cut
Publikationen
20
allowing unconstrained movement of the proximal radius in relation to the ulna. The
radius was osteotomised midway between the 2 central fixator pins, removing a bone
block of ~ 1 cm length. In extension of the established model11,12, shortening as well
as lengthening of the radius was performed at 1 mm increments from 0 to 2 mm.
Fig 1: Experimental setup of the in vitro model for precise creation of positive as well as
negative Radioulnar Incongruence (RUI) at the level of the elbow joint. The radius has
been osteotomised and rigidly reconstructed using a type 1 unilateral external skeletal fixa-
tor connected with a linear side bar. The aluminum rod, which extends up to the level of
the humeral epicondyles, defines the axis of lengthening and shortening exerted by the lin-
ear side bar, visible in each transverse computed tomographic (CT) scan of the elbow joint.
Publikationen
21
3D evaluation of RUI
Within each of the 8 elbow joints, 8 states of RUI evaluated: 4 incongruent (-2, -1,
+1, +2 mm), 1 congruent (0 mm) state of the radioulnar junction, and 3 randomly
chosen repetitions (from -2 over 0 to +2 mm). The sequence for creating RUI states
was also randomly defined. Randomizations were performed using a freely available
random list generator (http://www.random.org/).
Each time the linear side bar had been lengthened or shortened a complete
transverse CT scan of the elbow joint was performed simulating sternal recumbency
with the elbow joint at an angle of ~ 135°. Acquisi tion of CT data was performed on a
multi-slice helical CT-scanner (Philips Brilliance, Philips, Eindhoven, the Netherlands)
with an average in-plane resolution of 0.159 mm (SD = 0.011 mm) and a slice thick-
ness of 1 mm with an overlapping increment of 0.5 mm. Image reconstruction was
done using a sharp bone filter (FilterType and ConvolutionKernel D; Philips).
After data acquisition 3D surface models of the elbow joint were calculated using
dedicated image analysis software based on the Visualization ToolKit,22 (Kitware Inc.,
New York, NY, USA) an open source, freely available software system for 3D com-
puter graphics, image processing and visualization. Further enhancement as well as
inspection of the 3D models were performed using ParaView (Kitware Inc., New
York, NY, USA, http://www.paraview.org/New/index.html) an open-source, multi-
platform visualization framework.
As the radio-ulnar joint surfaces are hidden by the distal humerus we had to simu-
late artificial disarticulation of the reconstructed elbow joint to get isolated 3D models
of the proximal radius and ulna (Fig 2). The humerus was manually delineated within
Publikationen
22
the original image slices. Using that extracted humerus as a template it was rigidly
matched onto the other CT volumes of the same elbow using custom made image
registration software.23 Deleting the matched template from each image volume
allowed computation of an isolated 3D model of radius and ulna.
Finally the 64 3D models were randomized and blindly evaluated by 3 independ-
ent investigators (E.L., P.B., H.W.). Using the ParaView visualization framework each
investigator was free to inspect each 3D model at his own pace by moving, scaling
and rotating the model on the computer screen. In the end, each observer had to
estimate the RUI present at 1 mm precisely, with an RUI of zero representing a
congruent joint.
-2mm
-1mm
0mm
+1mm
+2mm
Fig 2: Three-dimensional (3D) models of the 5 simulated radioulnar conformations.
Evaluation of the Experimental Model of RUI
First, we dtermined that application of the sidebar with osteotomy of the radius did
not induce RUI compared with the native elbow. Therefore 3 transverse CT data
sets, referred to as A1-A3, were acquired before RUI investigation. The 1st scan was
of the native elbow (A1), the 2nd after osteotomy of the radius and application of the
linear sidebar (A2), and the 3rd after several evenly chosen cycles of lengthening
and shortening of the radius (A3). Before CT scanning of A2 and A3 as well as the 8
Publikationen
23
induced RUI states, an aluminum rod extending up to the level of the humeral
epicondyles was rigidly connected to the linear side-bar (Fig 1). Because the rod was
fixed parallel to the long axis of the sidebar, its long axis within the image volume
represented precisely the axis along the experimentally induced lengthening and
shortening of the radius. As the native elbow (A1) had no sidebar attached and there-
fore no reference rod could be attached to it, the image data of the reference tube of
A2 were transformed into A1. This was done based on the transformation matrix
obtained after matching the manually extracted radius of A2 onto A1, similar to that
described for the humerus. This step equipped the native elbow data with a reference
for the axis of future lengthening and shortening exerted onto the radius in the sub-
sequent image volumes.
As already described for the 8 states of RUI, A1-A3 were then processed similarly
resulting in a 3D model of the proximal radius and ulna together with the 3D model of
the reference rod. After removal of the humerus and automatic calculation of the long
axis of the reference rod using oriented bounding box tree calculation24, the distance
of the most proximal points of the radius and the ulna parallel to the long axis of the
reference rod was measured within the 3 3D models (A1-A3; Fig 3). Pair-wise com-
parison using the Wilcoxon signed ranks test between the value measured on A1 and
the values obtained on A2 and A3, respectively, allowed estimation of inadvertently
induced RUI attributed to the experimental setup. A P-value <.05 was considered
significant.
Corresponding to that, the effective amount of RUI induced by lengthening and
shortening of the linear sidebar had to be evaluated for the 8 RUI states investigated.
Therefore, the distance of the most proximal point of radius and ulna in the subse-
Publikationen
24
quent 3D models of experimentally induced RUI was measured as described for A1-
A3. Subtracting that value from the one measured on A1 gave the relative movement
of the proximal radius in relation to the proximal ulna. Pearson product moment cor-
relation coefficients analysis of that value and the presumed RUI induced on the
linear sidebar gave an estimate of model accuracy.
Fig 3: Measurement of relative position of the radius in respect to the ulna. Two parallel
planes (white) orthogonal to the long axis (grey dotted line) of the 3D model of the alumi-
num rod were manually positioned, 1 at the most proximal point of the radius (black open
arrow) and 1 at the most proximal point of the ulna (white open arrow). The distance of
those 2 planes (black short arrow) measured perpendicular to the long axis of the alumi-
num rod (grey dotted line) defined the proximo-distal position of the radius relative to the
ulna.
Publikationen
25
Data analysis
Statistical calculations were performed using the software SPSS 13.0 for
Windows (SPSS Inc., Chicago, IL). Sensitivity and specificity were calculated based
on crosstable calculation for each investigator separately. The overall sensitivity and
specificity were expressed as the median of the 3 investigators. Three different
definitions of RUI were investigated: (1) estimation of an incongruent versus a con-
gruent joint, summarizing all states of RUI different from a congruent joint, with
respect to the “Angular Vector Model”, (2) all positive RUIs versus the congruent joint
reflecting the shortened radius scenario of the traditional model of RUI and (3) all
negative RUIs versus the congruent joint. As the study design used 2 possible states
of incongruence, underestimation of specificity would be inevitable when applying the
traditional definition of a congruent joint as “the unmodified elbow”.13 Therefore, con-
gruence was defined in (2) and (3) as any state different from the one analyzed when
calculating sensitivity.
Finally we analyzed our data only with respect to severe RUI (≥ 2 mm). Therefore,
sensitivity for an RUI of -2 or +2 mm was calculated in respect to whether the joint
was scored as incongruent, either as a -2/+2 mm RUI or as a -1/+1 mm RUI.
The intraclass correlation coefficient (ICC) was used to quantify inter- as well as
intraobserver variability. Intraobserver repeatability was determined with correlations
between measurements by 1 randomly chosen individual (H.W.), estimating RUI on
the 64 3D models 3 times at a weekly interval. Interobserver repeatability was
determined with correlations between estimations of the 3 individuals.
Publikationen
26
Results
Reliability of the Experimental Model of RUI
No significant changes in relative radioulnar position were introduced during the
experimental setup (P = 0.375). Even after several cycles of lengthening and short-
ening the native state of the radioulnar transition was re-established (P = 0.078).
Comparing relative movement of the proximal radius of the 8 RUI states with
respect to the native unchanged elbow (A1) and the presumed proximodistal move-
ment of the radius exerted by the sidebar had a correlation coefficient (R-value) of
0.996 (R2 = 0.992; Fig 4 ).
Fig 4: Pearson correlation between presumed radioulnar incongruence and the change in
relative position of the radius measured within the 3-dimensional (3D) models of the 8 RUI
states investigated within each elbow with respect to the native, unchanged elbow A1 (R-
value of 0.996 (R2 = 0.992)).
Publikationen
27
Sensitivity, specificity (Tables 1 and 2)
Randomization of 3 additional RUI states resulted in an even distribution of each
simulated RUI. The frequency of each RUI within the 64 3D models investigated was
as follows: -2 mm RUI = 11 times, -1 mm RUI = 12, a congruent radioulnar joint = 13,
+1 mm RUI= 14 and +2 mm RUI = 14. Ratings of the 64 models of the 3 investigators
separately are summarized in (Table 1).
Table 1: Cross-Table Summarizing Results for 3 Investigators for the 64 Models of Radioul-
nar Incongruence (RUI) (n = 64)
-2 mm -1 mm 0 mm +1 mm +2 mm Estimated incidence
Estimated RUI -2 mm 5 – 9 - 5 3 - 3 - 0 8 - 12 - 5
Estimated RUI -1 mm 6 – 2 - 6 8 - 7 - 12 5 - 1 - 1 19 – 10 - 19
Estimated RUI 0 mm 1 - 2 - 0 8 - 10 - 12 6 - 5 - 1 2 – 0 - 0 17 – 17 - 13
Estimated RUI +1 mm 0 - 2 - 0 7 - 7 - 13 6 - 9 - 1 13 – 18 - 14
Estimated RUI +2 mm 1 - 2 - 0 6 - 5 - 13 7 – 7 - 13
True incidence 11 12 13 14 14
The results for the 3 investigators are listed separated by a dash: investigator 1- investigator
2–investigator 3. The lower line summarizes the true incidence of each state of RUI within
the 64 models investigated. The row on the right summarizes the number of estimations of
each investigator for the 5 possible states of RUI.
Median sensitivity for detecting any form of incongruent joint was 0.86 (range 0.82
- 0.98), median specificity was 0.77 (range 0.62 – 0.92). Evaluating a positive step
versus a congruent joint simulating a shortened radius resulted in a median sensi-
Publikationen
28
tivity of 0.82 (range 0.71 – 0.96) and a median specificity of 1.00 (range 0.94 – 1.00).
The shortened ulna reflecting a negative RUI was detected with a median sensitivity
of 0.96 (range 0.91 – 1.00) and a median specificity of 0.98 (range 0.88 – 1.00). Sen-
sitivity at detecting an RUI of at least 2 mm was 1.00 for all 3 types of RUI investi-
gated (refer to Table 2 for ranges of sensitivity).
Table 2: Sensitivity and Specificity for the 3 Types of Radioulnar Incongruence (RUI) inves-
tigated (n = 64)
Sensitivity*
RUI 1-2 mm RUI ≥ 2 mm Specificity*
Incongruent vs. congruent joint 0.86 (0.82 – 0.98) 1.00 (0.92 – 1.00) 0.77 (0.62 – 0.92)
Positive RUI vs. congruent joint# 0.82 (0.71 – 0.96) 1.00 (0.86 – 1.00) 1.00 (0.94 – 1.00)
Negative RUI vs. congruent joint§ 0.96 (0.91 – 1.00) 1.00 (1.00 – 1.00) 0.98 (0.88 – 0.98)
* Expressed as the median of the 3 independent investigators together with their corre-
spondingmaximal and minimal values in brackets
# Congruent joint defined as any type of RUI different from a positive RUI
§ Congruent joint defined as any type of RUI different from a negative RUI
Inter- and intra-observer agreement
ICC for interobserver agreement in estimating RUI at 1 mm precisely was 0.87
(95% CI 0.80-0.91). Intraobserver repeatability assessed for 1 investigator was high
with an ICC of 0.96 (95% CI 0.94-0.97).
Publikationen
29
Discussion
To our knowledge, this is the 1st study focusing on both positive as well as nega-
tive RUI. Therefore, detection of a congruent radioulnar joint was more challenging in
this model of RUI as the investigators could misjudge a congruent joint not only as
positive but also as negative RUI. This led to an increased number of false-positive
results, reducing specificity to 0.77. Simulating the situation in which the investigators
had only to choose between a congruent joint and a positive RUI or between a con-
gruent joint and a negative RUI, specificity was 1.00 and 0.98, respectively. Never-
theless, we feel confident that our complex understanding of RUI is closer to the
situation encountered clinically with canine elbow dysplasia.10 Unfortunately, it makes
direct comparison with preceding studies, which only considered positive RUI,
difficult.11-13,25
Overall visual estimation of RUI using 3D image rendering scores comparable
with those reported for radiographic and 2D CT assessment of positive RUI.11-13,20,25
With a median sensitivity of 0.86 for correct identification of any type of incongruent
joint most of the modified elbows were identified as noncongruent. But, because of
already mentioned complexity of both positive and negative RUI, a value of 0.77 as
the median specificity for correct identification of any congruent elbow is less than we
expected. Being of comparable specificity than plain radiographs or 2D CT
measurements, 13,12,25 this specificity (0.77) puts about a quarter of congruent elbows
at risk of an invasive procedure that may not be indicated. As a consequence we
conclude that a highly specific method for accurate estimation of RUI in clinical cases
of elbow dysplasia still has to be developed, provided that the cited complex under-
standing of RUI is assumed.10
Publikationen
30
For diagnosis of isolated positive RUI (short radius scenario), our method proved
superior to what has been claimed as the gold standard.19,20 With a median sensi-
tivity of 0.82 accurate detection of positive RUI was achieved in most affected cases.
Reformatted CT images score comparably well11,13,20,21; however, with a median
specificity of 1.00 semiquantitative estimation of RUI using 3D image rendering is ex-
ceptional accurat, assuring diagnostic safety when applying the technique in clinical
practice. Accuracy even further improved when analyzing RUI only with respect to a
radioulnar step of ≥ 2 mm. With a sensitivity of 1.00, regardless of the type of RUI in-
vestigated, estimation of RUI by means of 3D image rendering would allow for
definitive diagnosis of pronounced RUI. Such differentiation of mild versus severe
RUI could be relevant, as small RUI remains of unknown clinical significance.13,19
The only reported method reaching comparable sensitivity (0.94) with good speci-
ficity (0.82) is arthroscopy.13 Arthroscopy offers the advantage of direct observation
of cartilage surfaces instead of indirect estimation of joint incongruence as occurs
when performing radiographic as well as CT-based measurements. But arthroscopy
is invasive, limiting its usefulness as a screening tool.21 Moreover, arthroscopic esti-
mation of small RUI might be biased in clinical cases of elbow dysplasia because the
radioulnar joint space is often obstructed by fragmentation of the lateral cartilage of
the MCP, rendering precise appreciation of the radioulnar transition challenging.13
With regard to these potential limitations of arthroscopy, seemingly the ultimate
gold standard in evaluating elbow incongruence, and especially small RUI, remains
gross anatomical dissection of the joint. This assumption is further supported by the
fact that every in vitro study aimed at quantifying RUI has been validated by gross
anatomic inspection of the radioulnar joint surface at the end of experiments.11-13,21,25
Publikationen
31
Being a maximal invasive procedure not applicable to living patients we aimed at
replicating gross-anatomic inspection in a noninvasive way. Extension of CT
measurements to the third dimension in form of high quality 3D renderings of the
bony surfaces of radius and ulna provides a copy of the true anatomy at the level of
the subchondral bone. This approach gives a highly realistic, unobstructed view at
the radioulnar transition at any level of the radioulnar articulation.
We would estimate the expenditure of time needed to create a 3D model of radius
and ulna under clinical conditions to be about 30-40 minutes. This is more than would
be desirable for routine clinical use, but it would allow for evaluation of RUI in
selected cases. Time of data processing could be decreased by developing a
program which automatically segments the humerus and subsequently deletes it
from the image volume of interest. Manual segmentation is by far the most time con-
suming process during image processing, but it must be performed accurately, be-
cause the quality of the 3D renderings and, therefore, the evaluation of RUI depends
on it to a high degree.
We only investigated semiquantitative visual estimation of RUI. As a conse-
quence the precision gained depends on the experience of the investigator in charge.
As documented for radiographic estimation of RUI12, relevant operator related differ-
ences may be expected. This was also true in our study, even though an ICC of 0.87
attests good interobserver agreement. In combination with an ICC of 0.96 for
intraobserver repeatability, our method has the potential to be reliable as well as
highly repeatable.
Publikationen
32
Looking at the investigators separately (Table 1), an obviously high precision was
reached for investigator 3. Admitting the fact, that a diagnostic tool should work well
in the hands of an average investigator and that, therefore, the median values of
sensitivity as well as specificity provided in Table 2 are of primary relevance, the
question remains how investigator 3 was able to attain such high precision. The most
probable explanation relates to the fact that this person performed the experimental
simulation of RUI, including the generation of the 3D models. During this time and the
process of validation of the experimental setup, he had numerous occasions on
which he was aware of the RUI present within the 3D models. Therefore, he could be
considered an extensively trained investigator.
Because estimation of RUI within the 64 3D models was performed several
months after final image processing and as the evaluation was performed randomly
in a blinded fashion, we feel confident that the high precision was because of in-
creased experience and not because of “recognition” of the different models.13 In
contrast, the other 2 investigators had only the 5 models shown in Fig 2 for training,
rendering them beginners in 3D evaluation of RUI. This finding might suggest that
after appropriate training, estimation of RUI by means of 3D renderings might reach
values with specificity and sensitivity in the middle range of 0.90. Such high precision
seems realistic, because 3D renderings of the proximal radius and ulna offer the po-
tential to assess the complex 3D shape of the radioulnar articulation in all details.
Quantitative measurement of RUI on the 3D model of the radioulnar articulation
could eliminate significant operator related error, rendering training dispensable. But
distinct and reproducible landmarks on the radioulnar joint space would be needed.
Any landmark on the periphery of the joint could be biased in clinical cases, where
Publikationen
33
secondary arthritis especially in the form of osteophytes develops. Additionally,
because of the nature of CT acquisition as well as subsequent 3D image processing
and display, edges are inadvertently smoothed, increasing the difficulty to reliable
identifying comparable landmarks. Measurement of relative radioulnar movement as
done in this study for evaluation of induced RUI would not be applicable to individual
joints of clinical patients. The axis on which the movement of the proximal radius in
relation to the ulna had been measured is unknown in clinical cases. Furthermore,
the proximodistal movement of the radius was measured with respect to the
unchanged, presumably congruent joint (A1). Because canine elbow dysplasia is
usually bilateral presentation, clinical cases would not provide this reference.
Because the already published in vitro model was extended to negative RUI,
re-evaluation of the precision of experimentally induced RUI at the level of the radi-
oulnar joint space was considered necessary. In the previous studies, quantification
of the induced RUI was based on the measurement of radial shortening in the area of
the radial osteotomy.11-13,20,25 Using that approach, 2 potential errors could be intro-
duced into the experimental setup. First, application of the linear sidebar together
with the osteotomy of the radius might produce RUI. If this occurs, an artificially
incongruent joint would be defined as congruent, leading to false-positive results.
Secondly, the amount of radial shortening measured at the osteotomy does not
assure the same amount of RUI present within the joint. The 3D analysis of the 3
congruent CT volumes (A1-A3) allowed us to conclude that any state of RUI induced
at any later stage of the experiment truly reflected an RUI different from the one seen
in sound, unaffected elbows. On the other hand, simulating a congruent joint indeed
did result in the same radioulnar conformation as we would have seen in the native,
Publikationen
34
unchanged elbow. The high correlation of presumed RUI and the one measured with
respect to the unchanged elbow in the subsequent 3D models of RUI proved that
negative as well as positive RUI could experimentally be induced at high precision
using the extended invitro model.
This leads us to what we think is the major limitation of our study as well as all
other preceding in vitro studies on RUI.11-13,25 Related to the nature of “good in vitro
practice”, only joints from mature dogs, free of proven joint pathology, were used.
Finally, RUI was produced by axial movement of the radial head with respect to the
ulna. That means, that we tried to mimic developmental humeroradioulnar incongru-
ence by axial movement of a well shaped joint surface within an otherwise physio-
logically shaped joint. However, this approach completely neglects the fact that joint
incongruence in the form of elbow dysplasia is supposed to take place at an early
stage of skeletal development, at which bone, cartilage and periarticular soft tissues
are exposed to a daily process of adaptation and remodeling. At that time, the devel-
opment of the final microanatomic conformation of the apposing joint surfaces does
not only depend on genetic predisposition, but more importantly on the mechanical
stimulus exerted on the joint as well.26 Hamrick stated in his paper on the elaboration
of the “chondral modeling theory” originally developed by Frost26,27, that “the articular
surfaces of a growing joint must, in order for the locomotor system to function effec-
tively, follow a developmental trajectory that maintains both a normal pattern of joint
movement and an acceptable stress distribution within the articular cartilage throug-
hout postnatal ontogeny”. The general role of mechanical factors in limb joint
morphogenesis is also supported by Ogden who stated that “postnatally, joint motion
and joint reaction forces are extremely consequential to the final adult joint con-
Publikationen
35
tours''.28 Expanding this theory to elbows with any type of incongruence, it seems
evident that even in case of a pure axial RUI, which we do not believe occurs in the
most cases, the mechanism of adaptive joint modeling will lead to malformation of
the whole joint. This theory is illustrated in a series of antebrachial growth deformities
in 34 dogs.29 It was found that apart from an obvious radial length deficit causing
severe RUI, malformation of the elbow joint was a common finding, which persisted
even after radial lengthening by use of distraction osteogenesis. However, correction
of radial length deficit had a more favorable outcome when performed at a young
age, indicative for an adaptive mechanism of the adjacent epiphysis counter-
balancing already present malformation. Therefore, we propose looking at elbow
incongruence more in terms of 3D shape analysis of the apposing joint surfaces
instead of focusing on a type of RUI of probably purely artificial character. The
presence of local incongruence at the apex of the MCP without obvious RUI has
already been documented20, supporting our understanding of elbow incongruence.
As for the human elbow joint30,31, detailed analysis of the 2D and 3D shape of the
humeroradioulnar joint surface as well as estimation of joint contact conditions by
contact area analysis may provide the relevant insight into what the British Veterinary
Orthopaedic Association has called “the enigmas of the canine elbow”.32
Experimentally induced positive as well as negative RUI can be identified in vitro
at high precision using 3D renderings of the radioulnar joint surface. Measurement of
RUI at the level of the subchondral bone may be less prone to bias because of
osteoarthritic changes within the joint space an is also noninvasive. Additionally, it
may serve as the future basis for more elaborate analysis of joint shape appraising
Publikationen
36
elbow incongruence in a more physiological way. However, currently, arthroscopy
remains the superior modality for identification of a positive RUI in vitro.
Bibliography
1. Samoy Y, Van Ryssen B, Gielen I, et al: Review of the literature: elbow incongruity
in the dog. Vet Comp Orthop Traumatol 19:1-8, 2006
2. Gemmill TJ, Clements DN: Fragmented coronoid process in the dog: is there a role
for incongruency? J Small Anim Pract 48:361-368, 2007
3. Danielson KC, Fitzpatrick N, Muir P, et al: Histomorphometry of fragmented medial
coronoid process in dogs: a comparison of affected and normal coronoid proc-
esses. Vet Surg 35:501-509, 2006
4. Wind AP: Elbow incongruity and developmental elbow diseases in the dog: Part I.
J Am Anim Hosp Assoc 22:712–724, 1986
5. Kirberger RM: Elbow dysplasia in the dog: pathophysiology, diagnosis and control.
J South Afr Vet Assoc 69:43–54, 1998
6. Olson NC: Asynchronous growth of the canine radius and ulna: surgical correction
following experimental premature closure of the distal radial physis. Vet Surg
10:125–131, 1981
7. Olson NC, Carrig CB, Brinker WO: Asynchronous growth of the canine radius and
ulna: effects of retardation of longitudinal growth of the radius. Am J Vet Res
40:351-355, 1979
8. Preston CA, Schulz KS, Taylor KT, et al: In vitro experimental study of the effect of
radial shortening and ulnar ostectomy on contact patterns in the elbow joint of
dogs. Am J Vet Res 62:1548-1556, 2001
9. Meyer-Lindenberg A, Fehr M, Nolte I: Co-existence of ununited anconeal process
and fragmented medial coronoid process of the ulna in the dog. J Small Anim
Pract 47:61-65, 2006
Publikationen
37
10. Lozier SM: New prospectives in elbow dysplasia, in 13th ESVOT Congress, Mu-
nich, 7th - 10th September 2006, Munich, Germany, pp 93-96
11. Holsworth IG, Wisner ER, Scherrer WE, et al: Accuracy of computerized tomo-
graphic evaluation of canine radio-ulnar incongruence in vitro. Vet Surg 34:108-
113, 2005
12. Mason DR, Schulz KS, Samii VF, et al: Sensitivity of radiographic evaluation of
radio-ulnar incongruence in the dog in vitro. Vet Surg 31:125-132, 2002
13. Wagner K, Griffon DJ, Thomas MW, et al: Radiographic, computed tomographic,
and arthroscopic evaluation of experimental radio-ulnar incongruence in the dog.
Vet Surg 36:691-698, 2007
14. Slocum B, Pfeil I: Radius elongation for pressure relief of the coronoid process of
the ulna, in 12th ESVOT Congress, Munich, 10th - 12th September 2004, Munich,
p 259
15. Mason DR, Schulz KS, Fujita Y, et al: Measurement of humeroradial and humer-
oulnar transarticular joint forces in the canine elbow joint after humeral wedge and
humeral slide osteotomies. Vet Surg 37:63-70, 2008
16. Fujita Y, Schulz KS, Mason DR, et al: Effect of humeral osteotomy on joint sur-
face contact in canine elbow joints. Am J Vet Res 64:506-511, 2003
17. Puccio M, Marino DJ, Stefanacci JD, et al: Clinical evaluation and long-term fol-
low-up of dogs having coronoidectomy for elbow incongruity. J Am Anim Hosp
Assoc 39:473-478, 2003
18. Ness MG: Treatment of fragmented coronoid process in young dogs by proximal
ulnar osteotomy. J Small Anim Pract 39:15-18, 1998
19. Kramer A, Holsworth IG, Wisner ER, et al: Computed tomographic evaluation of
canine radioulnar incongruence in vivo. Vet Surg 35:24-29, 2006
20. Gemmill TJ, Mellor DJ, Clements DN, et al: Evaluation of elbow incongruency us-
ing reconstructed CT in dogs suffering fragmented coronoid process. J Small A-
nim Pract 46:327-333, 2005
Publikationen
38
21. Gemmill TJ, Hammond G, Mellor D, et al: Use of reconstructed computed tomo-
graphy for the assessment of joint spaces in the canine elbow. J Small Anim Pract
47:66–74, 2006
22. Schroeder W, Martin K, Lorensen B: The Visualization Toolkit. An object-oriented
approach to 3D graphics (ed 4)Kitware Inc, 2006
23. Böttcher P, Maierl J, Hecht S, et al: Automatic image registration of three-
dimensional images of the head of cats and dogs by use of maximization of mu-
tual information. Am J Vet Res 65:1680-1687, 2004
24. Gottschalk S, Lin MC, Manocha D: OBB-Tree: A Hierarchical Structure for Rapid
Interference Detection, in SIGGRAPH, New Orleans, LA, pp 171-180
25. Blond L, Dupuis J, Beauregard G, et al: Sensitivity and specificity of radiographic
detection of canine elbow incongruence in an in vitro model. Vet Radiol Ultra-
sound 46:210-216, 2005
26. Hamrick MW: A chondral modeling theory revisited. J Theor Biol 201:201-208,
1999
27. Frost HM: A chondral modeling theory. Calc Tissue Intl 28:181-200, 1979
28. Ogden JA: Chondro-osseous development and growth, in Urist MR (ed): Funda-
mental and Clinical Bone Physiology. Philadelphia, JB Lippincott, 1980, pp 108-
171
29. Theyse LF, Voorhout G, Hazewinkel HA: Prognostic factors in treating ante-
brachial growth deformities with a lengthening procedure using a circular external
skeletal fixation system in dogs. Vet Surg 34:424-435, 2005
30. Lawlor G, Hennessy R, Carr AJ, et al: 3D analysis of elbow joint geometry, in
16th Meeting of the Northern Ireland Biomedical Engineering Society, Sligo, Ire-
land, 26th & 27th January, 2002, p 81
31. Waide DV, Lawlor GJ, McCormack BA, et al: The relationship between surface
topography and contact in the elbow joint: development of a two-dimensional ge-
ometrical model in the coronal plane. Proc Inst Mech Eng [H] 214:413-423, 2000
Publikationen
39
32. BVOA: Enigmas of the canine elbow, in Autumn Scientific Meeting November
2006, Chester, England
Publikationen
40
3.2 Sensitivity and specificity of arthroscopic est imation of
positive and negative radio-ulnar incongruence in d ogs: an in
vitro study
H. Werner; P. Winkels; V. Grevel; G. Oechtering; P. Böttcher
Vet Comp Orthop Traumatol 2009; 22 (6): 437-441
Objectives: To determine the sensitivity and specificity of arthroscopic estimation of
positive and negative radio-ulnar incongruence (RUI) in the canine elbow joint.
Methods: Experimental radial shortening and lengthening by 1 and 2 mm increments
were performed in nine right elbow joints, extending an established surgical in vitro
model of RUI. Arthroscopic estimation of each artificially produced radio-ulnar joint
conformation (RUJC) was done using a graduated hook probe. A total of 72 RUJC
were blindly evaluated in a random manner by an independent investigator and esti-
mated in 1 mm increments (-2, -1, 0, +1, +2).
Results: The sensitivity for identification of an incongruent joint was 0.98 (95% CI:
0.90 to 0.99). The specificity for identification of a congruent joint was 0.89 (95% CI:
0.65 to 0.98). Analyzing the data only in respect to a congruent joint versus one with
a shortened radius (positive RUI) resulted in a sensitivity of 0.96 (95% CI: 0.80 to
0.99) and a specificity of 1.00 (95% CI: 0.92 to 1.00).
Clinical Significance: Accurate estimation of RUI in dogs affected by elbow dyspla-
sia might improve functional outcome and prevent osteoarthritis when corrective or
modifying osteotomies are being considered as part of the treatment plan. Arthro-
Publikationen
41
scopy has been shown to be highly accurate and precise in detecting both positive
and negative RUI in vitro. However, its diagnostic strength under clinical conditions
has still has to be proven.
Introduction
Elbow dysplasia (ED) is a common condition that mainly effects young dogs, and
it is bilateral in 35% of the cases in Labrador Retrievers (1). Elbow dysplasia repre-
sents a group of conditions including fragmented medial coronoid process (FCP),
osteochondritis dissecans and ununited anconeal process (UAP), amongst others
(2). Developmental elbow incongruence is believed to be the most probable under-
lying cause in the pathogenesis of FCP and UAP (2-10). Based on this assumption,
the development of a FCP or osteochondritis dissecans of the medial aspect of the
humeral condyle, and their advanced stages in the form of medial compartment
disease, would be the result of chronic supraphysiological loading of the medial com-
partment (11, 12). Fatigue microdamage of bone in the region of the medial coronoid
process has been documented, even in the absence of obvious cartilage degenera-
tion, thus further strengthening this hypothesis (13). One type of incongruence that is
supposed to induce increased pressure onto the medial coronoid process originates
with underdevelopment of the trochlear notch in respect to the humeral condyle (2).
Another type of incongruence occurs as a consequence of asynchronous bone
growth of the radius and ulna, leading to the formation of a step at the level of the
transition of the ulnar and radial joint surfaces (2, 5, 14, 15). This form of incongru-
ence, further referred to as radio-ulnar incongruence (RUI), is generally agreed to be
the most common type of elbow incongruence, and has become the traditional
Publikationen
42
experimental model for elbow incongruence. In this model, a shortened radius results
in increased mechanical pressure on the medial coronoid process and humeral
trochlea because the joint compression forces are no longer evenly distributed
between the radial and ulnar joint surfaces (15). Even though the short radius
scenario might explain most of the pathologies encountered in the medial compart-
ment of dysplastic canine elbows, it does a poor job when considering the coexis-
tence within a joint of FCP and UAP; the latter is thought to result from a relative
overgrowth of the radius (16,17). On the other hand, humero-ulnar incongruence
seems unlikely to be the major contributing factor in elbows affected by FCP, other-
wise FCP and UAP would be anticipated to occur simultaneously in the majority of
the cases (5). Nevertheless, subtle humero-ulnar incongruence has been demon-
strated to be part of the physiological joint mechanism in both canine and human
elbows (4, 18-20).
Based on these limitations of the traditional model of elbow incongruence, a more
complex, three-dimensional angular vector model (AVM) has been recently proposed
(21, 22). The AVM is based on the hypothesis that both positive as well as negative
RUI lead to physical overloading of the medial joint compartment. In contrast to the
traditional model in which relative shortening of the radius is assumed to be present
in any elbow affected by FCP, the AVM accounts for the complex secondary adjust-
ment of the humeral condyle following both types of RUI, presuming that angular
forces are exerted that then result in rotary and bending displacement of the humeral
condyle and consequently mechanical overload of the medial compartment. In light of
this complex understanding of RUI, the evaluation of the exact type of RUI present in
the individual elbow of dogs affected by ED seems imperative when osteotomies
Publikationen
43
such as ulnar osteotomy, radial lengthening or sliding humeral osteotomy are being
considered (7, 9, 10, 15, 23-26).
Radiographic evaluation of positive RUI has been documented to have relatively
poor sensitivity and specificity in vitro (27). However, moderate-to-severe RUI
(≥2mm) may be detected with high accuracy (28). Computed tomography (CT)
evaluation scores far better and has become the gold standard in clinical practice
during the last few years (12, 29-31). Nevertheless, a recent study comparing CT,
plain radiography and arthroscopy challenges CT as the gold standard, reporting
unacceptably low values for sensitivity and specificity (32). Semi-quantitative estima-
tion of RUI based on three-dimensional image rendering using reformatted axial CT
images of the radio-ulnar joint surface (33) might bear the potential to overcome
some of the short comings of RUI estimation. However it is still of inferior sensitivity
and specificity when compared to arthroscopic evaluation of RUI, and limb position
during CT scanning might affect assessment of RUI (32-35).
Therefore, the purpose of the current study was to determine the sensitivity and
specificity of arthroscopy in the estimation of positive and negative RUI, accounting
for the more complex understanding of elbow incongruence proposed by the AVM
(21, 22).
Publikationen
44
Materials and Methods
Specimens
Nine right forelimbs of medium to large breed, mature dogs weighing more than
20 kg each were included. None of the dogs had any prior history of right forelimb
lameness, and they were euthanatized for reasons unrelated to this study. Elbow
joint pathology was excluded by complete radiographic and CT examinations that
were blindly evaluated by two different investigators (PB, HW). These evaluations
were further confirmed at the end of the experiment by disarticulation of the elbow
joint and inspection of the joint surfaces for any degenerative cartilage damage.
Experimental model of radio-ulnar incongruence
Radio-ulnar incongruence was experimentally induced using a previously
described in vitro model, which was an extension of an already well established
experimental setup for positive RUI only (27, 29, 33). Briefly, a four-pin type 1 uni-
lateral external skeletal fixator was applied to the cranial aspect of the radial
diaphysis. Four 4 mm fixation pins were connected to a custom-made linear side-bar
allowing both lengthening and shortening with micro-millimeter accuracy. Axial
stability of the side bar as well as bending properties had been determined up to a
load of 1000 Newton using a material testing machine. Two 3.5 mm cortical screws
were placed transversely from the ulnar styloid to the radial styloid process to elimi-
nate any axial or rotational movement between the distal radius and the ulna. The
inter-osseous ligament was cut, allowing unconstrained movement of the proximal
radius relative to the ulna. The radius was osteotomised midway between the two
Publikationen
45
central fixation pins, removing a bone segment of about 1 cm length. Subsequently
the radius was shortened and lengthened, mimicking five different states of RUJC:
two positive RUI simulating a shortened radius syndrome referred to as +2 and
+1mm RUI, an RUJC of 0 mm simulating a congruent joint and two negative RUI
simulating a shortened ulna syndrome referred to as -1 and -2 mm RUI.
Evaluation of the experimental model of radio-ulnar incongruence
To assure that the application of the side-bar together with the osteotomy of the
radius did not induce RUI in respect to the native elbow, thorough validation of our
experimental setup had been performed in a previous study of three-dimensional CT
image rendering for the visual estimation of canine positive and negative RUI (33). It
was shown that after application of the linear side bar and osteotomy of the radius,
the reconstructed elbow joint was not different from the native elbow in respect to the
state of radio-ulnar joint conformation (RUJC). To confirm that any change in length
of the radius exerted by the linear side bar resulted in exactly the same amount of
predicted RUI, axial CT scans were acquired of the native, unchanged elbows as well
as the modified elbows just before the first and directly after the last arthroscopic
evaluation. Computed tomography imaging was performed with the limb positioned to
simulate sternal recumbency, with an average in-plane resolution of 0.159 mm2
(standard deviation = 0.011 mm2; image matrix 512 x 512), a slice thickness of 1 mm
with an overlapping increment of 0.5 mm on a multi-slice helical CT-scanner (Philips
Brilliance: Philips, Eindhoven, Netherlands) at 140 kV and 150 mA. Image recon-
struction was done using a sharp bone filter (FilterType and Convolution Kernel D:
Philips, Eindhoven, Netherlands). The exact method of subsequent three-
Publikationen
46
dimensional image analysis which was used to measure the state of RUJC artificially
induced by lengthening or shortening the linear side bar, has been described else-
where (33). Briefly, after manual removal of the distal humerus from the CT image
data, a three-dimensional model of the radius and ulna was created and visualized
three-dimensionally by means of three-dimensional image rendering. In each of the
three models, the distance between the most proximal point on the radius and the
most proximal point on the ulna was measured in a plane that was parallel to the axis
of radial shortening and lengthening. The difference in this distance between the
native, unchanged elbow model and the elbow models before the first and after the
last arthroscopic session was defined as the change in RUJC. Pearson product
moment correlation coefficients analysis of these values and the corresponding
presumed RUJC induced on the linear-side bar gave an estimate of in-vitro model
accuracy.
Arthroscopic estimation of radio-ulnar incongruence
For each of the nine elbow joints, eight RUJC were evaluated arthroscopically.
The state of RUJC and the order of evaluations were randomized, based on a basic
set of four incongruent (-2, -1, +1, +2 mm), two congruent (0 mm) conformations and
two randomly chosen repetitions. All randomizations were performed using a random
list generator (Random list generator website: http\\www.random.org/). Arthroscopy
was performed by one investigator (PB) who was blinded to the state of induced
RUJC. Each elbow was processed on a different day, resulting in nine arthroscopic
sessions with eight RUJC each.
Publikationen
47
Standard medial arthroscopy was performed using a 30° fore oblique 1.9 mm
arthroscope (Karl Storz, Tuttlingen, Germany) (36). Estimation of the induced RUJC
was performed in 1 mm increments (-2, -1, 0, +1, +2) using a graduated hook probe
introduced into the joint via the medial instrument portal (Fig. 1). Measurements were
made at the transition of the ulnar incisure to the radial head, a location which has
been referred to as the base of the medial coronoid process (4, 30, 32, 37). To
assure equal conditions throughout the nine arthroscopic sessions, and to standard-
ise the arthroscopic evaluation within each of these, the limb was positioned in a
custom made brace, resulting in a 145° joint angle. To eliminate any impact on the
RUJC by external manipulations exerted on the elbow joint during arthroscopy,
neither pronation nor abduction of the antebrachium was performed when taking the
final measurements at the predefined elbow angle.
A)
B)
C)
Fig. 1: Arthroscopic evaluation of experimentally induced RUI in a right elbow. (A) congruent
joint, (B) negative 1 mm RUI, (C) positive 1 mm RUI. Cranial is on the left, caudal on the
right. Radio-ulnar joint conformation was measured at the transition of the ulnar incisure to
the radial head using a graduated hook probe. The hook probe had a diameter of 1 mm and
a length of 2 mm.
� = humerus; � = radius; � = ulna
Publikationen
48
Data analysis
Statistical calculations were performed using commercial software (SPPS 15.0 for
Windows: SPSS Inc., Chicago, IL, USA). Sensitivity and specificity were calculated
based on cross-table calculation for three different definitions of RUI: (1) estimation
of an incongruent versus a congruent joint, for which all states of RUI that were
different from a congruent joint were summarised in respect to the AVM, (2) all of the
positive RUI versus the congruent joint reflecting the shortened radius scenario of the
traditional model of RUI and (3) all negative RUI versus the congruent joint.
The 95% confidence intervals (CI) for each sensitivity and specificity were calcu-
lated using commercial software (Confidence Interval Analysis, CIA version 2.1.2.,
Available online at: http://www.som.soton.ac.uk/cia/main.htm).
Repeatability of arthroscopic estimation of RUJC was calculated based on the
RUJC, which were evaluated more than once within each elbow joint using intra-
class correlation coefficient (ICC).
Results
Reliability of the experimental model of radio-ulna r incongruence
The Pearson’s product moment correlation coefficients (r) between the estimated
and artificially created RUJC, and before the first and after the last arthroscopy, were
r = 0.99 (p ≤ 0.001; n = 9) and r = 0.99 (p ≤ 0.001, n = 9), respectively.
Publikationen
49
Sensitivity and specificity of arthroscopic evaluat ion of positive and negative
radio-ulnar incongruence
The frequency of each induced RUJC state within the 72 RUJC investigated, and
the corresponding arthroscopic estimations are summarized in Table 1. The sensitiv-
ity for detecting any form of incongruent joint was 0.98 (95% CI: 0.90 to 1.00), and
the specificity was 0.89 (95 % CI: 0.67 to 0.97). Evaluating a positive RUI versus a
congruent joint simulating a shortened radius resulted in a sensitivity of 0.96 (95% CI:
0.81 to 0.99) and a specificity of 1.00 (95% CI: 0.92 to 1.00). The shortened ulna
reflecting a negative RUI was detected with a sensitivity of 1.00 (95% CI: 0.88 to
1.00) and a specificity of 0.95 (95% CI: 0.85 to 0.99).
Table 1: Cross-table summarising the results of arthroscopic estimation of radio-ulnar joint
conformation (RUJC) in 72 randomly chosen states of RUJC in nine different elbow joints.
The gray highlighted fields show the matching arthroscopically estimated and experimen-
tally induced RUJC.
Artificially created radio-ulnar joint conformation Radio-ulnar joint conformation
-2 mm -1 mm 0 mm +1 mm +2 mm Total
- 2 mm 11 0 0 0 0 11
- 1 mm 2 15 2 0 0 19
0 mm 0 0 16 1 0 17
+ 1 mm 0 0 0 14 0 14
+ 2 mm 0 0 0 0 11 11
Arthroscopy
Total 13 15 18 15 11 72
Publikationen
50
Repeatability of arthroscopic radio-ulnar joint con formation estimation
The ICC for intra-observer agreement in estimating RUJC in 1 mm increments
was 0.96 (95% CI: 0.85 to 0.94).
Discussion
Detection of a congruent radio-ulnar joint might have been more challenging in
our study because the investigator could have misjudged a congruent joint as having
either a positive or a negative RUI. However, with a sensitivity and specificity of 0.98
and 0.89, respectively, arthroscopic estimation of negative as well as positive RUI
can be considered a highly accurate imaging modality. Furthermore, an ICC of 0.96
attests to the high intra-observer repeatability, which overall suggests superiority of
arthroscopic estimation of RUJC compared to all other imaging modalities investi-
gated so far (12, 27-30, 32, 33). This result is in accordance with another study that
reported similar high values for arthroscopic estimation of positive RUI, further
encouraging the use of arthroscopy for minimal-invasive estimation of RUI (32).
We feel that the precise evaluation of the exact amount and type of RUI to be a
prerequisite when considering osteotomies for the restoration of radio-ulnar joint
congruence. When adopting the traditional model of RUI, in which a shortened radius
results in overloading of the medial coronoid process, lengthening procedures of the
radius are thought to restore normal joint load, and might eliminate clinical signs and
stop the progression of osteoarthritis (23). Unfortunately, radial lengthening has not
been shown to be a reliable method (22). This might be related to absence of RUI at
all or even the presence of a negative RUI at time of surgery according to the AVM
Publikationen
51
(21,30). Lengthening of the radius would probably not result in restoration of physiol-
ogic joint loads in these cases and would therefore be contraindicated. Using arthro-
scopy for proper case selection might help to improve functional outcome after radial
lengthening, and it would allow for more targeted selection of other treatment modali-
ties, such as dynamic proximal ulnar osteotomy and sliding humeral osteotomy (7,
15, 24-26, 38).
The use of arthroscopy for estimation of RUI also has the advantage of permitting
direct visualisation of cartilage surfaces; this is not possible when using radiographic
or CT based measurements for estimation of joint congruence. Insertion of an arthro-
scope into the medial joint space might introduce iatrogenic RUI. However, in our
opinion, use of a 1.9 mm arthroscope eliminated the problem of iatrogenically
induced RUI and minimised iatrogenic cartilage damage.
The true diagnostic accuracy of arthroscopy for evaluation of RUI in clinical cases
affected by ED still remains to be investigated. Although we did not investigate the
exactness of RUI measurement at locations other than the ulnar incisure, other stud-
ies have confirmed the superiority of the ulnar incisure for the estimation of positive
RUI (30, 32). Furthermore, the reason why we did not include measurement at other
locations was because of the anticipated presence of cartilage damage, osteo-
chondral fracture and fissuring along the lateral border of the medial coronoid
process in vivo, thus placing any imaging technique that relies on measurements
taken at this location at risk of misinterpretation (13, 39). This assumption is
supported by the experience by one of the authors (PB) with arthroscopic estimation
of RUI in clinical cases.
Publikationen
52
One limitation of our study was that it was conducted with only one investigator
who is extensively trained in canine elbow arthroscopy. We did not investigate how
factors such as surgeon experience or different limb positioning, such as pronation,
supination or bending of the antebrachium, might influence the accuracy of arthro-
scopic estimation of RUI. However, we assume that in vivo estimation of RUI by
means of arthroscopy would be repeatable and reproducible in the hands of other
surgeons as long as they follow the proposed standardized protocol and eliminate
any unnecessary external manipulations. This assumption is supported by another
study that found an 88.6% inter-investigator agreement for arthroscopic estimation of
positive RUI amongst three investigators (32).
Another concern challenging any method of RUI estimation in vitro has been that
joints from mature dogs free of proven joint pathology were investigated (28, 29, 32,
33, 40). Unfortunately this approach neglects the fact that joint incongruence associ-
ated with ED is supposed to take place at an early stage of skeletal development,
and that the final micro-anatomical conformation of the apposing joint surfaces does
not only depend on genetic predisposition, but more importantly on the mechanical
stimulus exerted on the joint surfaces (41). Therefore any form of RUI is believed to
result in malformation of the whole joint as a consequence of a very complex func-
tional adaptation process of all the tissues involved. This theory is illustrated in clini-
cal cases of antebrachial growth deformity, in which malformation of the elbow joint is
a common finding (42). Based on these observations and the other conflicting views
of the traditional understanding of elbow incongruence that we have cited, we feel the
need to move on to a more complex understanding of ED. The isolated assessment
of a positive radio-ulnar step formation, has been shown to be an inconsistent finding
Publikationen
53
in severely affected clinical cases of ED, and therefore imaging might be extended to
a three-dimensional shape analysis of the involved joint surfaces (30, 43, 44).
In conclusion, arthroscopy was found to be a highly accurate and precise tech-
nique in the estimation of positive and negative RUI in vitro. Our results are
comparable to those reported for the arthroscopic evaluation of positive RUI alone.
However, due to the invasive nature of arthroscopy and anticipated difficulties in the
identification of the radio-ulnar transition in pathological joints, further studies are
warranted before arthroscopy could be considered as the gold-standard for the
estimation of RUI in clinically affected dogs.
Bibliography
1. Morgan JP, Wind A, Davidson AP. Bone dysplasias in the Labrador Retriever:
a radiographic study. J Am Anim Hosp Assoc 1999; 35: 332-340.
2. Wind AP. Elbow incongruity and developmental elbow diseases in the dog 1. J
Am Anim Hosp Assoc 1986a; 22: 711-724.
3. Boulay JP. Fragmented medial coronoid process of the ulna in the dog. Vet
Clin North Am Small Anim Pract 1998; 28: 51-74.
4. Wind AP, Packard ME. Elbow incongruity and developmental elbow diseases
in the dog 2. J Am Anim Hosp Assoc 1986b; 22: 725-730.
5. Kirberger RM, Fourie SL. Elbow dysplasia in the dog: pathophysiology, diag-
nosis and control. J S Afr Vet Assoc 1998; 69: 43–54.
6. Griffon DJ. Radio-ulnar incongruity and medial compartment disease of the
canine elbow. In: ACVS Veterinary Symposium; 2008 Oct 23-25; San Diego,
CA: 255-256.
Publikationen
54
7. Ness MG. Treatment of fragmented coronoid process in young dogs by proxi-
mal ulnar osteotomy. J Small Anim Pract 1998; 39: 15-18.
8. Collins KE, Cross AR, Lewis DD, et al. Comparison of the radius of curvature
of the ulnar trochlear notch of Rottweilers and Greyhounds. Am J Vet Res
2001; 62: 968-973.
9. Puccio M, Marino DJ, Stefanacci JD, et al. Clinical evaluation and long-term
follow-up of dogs having coronoidectomy for elbow incongruity. J Am Anim
Hosp Assoc 2003; 39: 473-478.
10. Fitzpatrick N, Yeadon R, Smith TJ. Early clinical experience with osteo-
chondral autograft transfer for treatment of osteochondritis dissecans of the
medial humeral condyle in dogs. Vet Surg 2009; 38: 246-260.
11. Samoy Y, Van Ryssen B, Gielen I, et al. Review of the literature: elbow incon-
gruity in the dog. Vet Comp Orthop Traumatol 2006; 19: 1-8.
12. Gemmill TJ, Mellor DJ, Clements DN, et al. Evaluation of elbow incongruency
using reconstructed CT in dogs suffering fragmented coronoid process. J
Small Anim Pract 2005; 46: 327-333.
13. Danielson KC, Fitzpatrick N, Muir P, et al. Histomorphometry of fragmented
medial coronoid process in dogs: a comparison of affected and normal
coronoid processes. Vet Surg 2006; 35: 501-509.
14. Olson NC, Carrig CB, Brinker WO. Asynchronous growth of the canine radius
and ulna: effects of retardation of longitudinal growth of the radius. Am J Vet
Res 1979; 40: 351-355.
15. Preston CA, Schulz KS, Taylor KT, et al. In vitro experimental study of the ef-
fect of radial shortening and ulnar ostectomy on contact patterns in the elbow
joint of dogs. A J Vet Res 2001; 62: 1548-1556.
16. Sjostrom L, Kasstrom H, Kallberg M. Ununited anconeal process in the dog -
pathogenesis and treatment by osteotomy of the ulna. Vet Comp Orthop
Traumatol 1995; 8: 170-176.
Publikationen
55
17. Meyer-Lindenberg A, Fehr M, Nolte I. Co-existence of ununited anconeal
process and fragmented medial coronoid process of the ulna in the dog. J
Small Anim Pract 2006; 47: 61-65.
18. Eckstein F, Lohe F, Schulte E, et al. Physiological incongruity of the humero-
ulnar joint: a functional principle of optimized stress distribution acting upon
articulating surfaces? Anat Embryol (Berl) 1993; 188: 449-55.
19. Eckstein F, Lohe F, Müller-Gerbl M, et al. Stress distribution in the trochlear
notch. A model of bicentric load transmission through joints. J Bone Joint Surg
Br 1994; 76: 647-653.
20. Maierl J, Böttcher P, Liebich H-G. Is incongruity pathological? In: 12th ESVOT
Congress; 2004 Sep 10-12; Munich, Germany: 85.
21. Lozier SM. How I treat elbows in the older canine patient and new prospec-
tives in elbow dysplasia. In: 13th ESVOT Congress; 2006 Sep 7-10; Munich,
Germany: 93-96.
22. Lozier SM. Radial lengthening osteotomy: Early rational, indications, methods
and results. In: ACVS Veterinary Symposium; 2008 Oct 23-25; San Diego, CA:
259-260.
23. Slocum B, Pfeil I. Radius elongation for pressure relief of the coronoid process
of the ulna. In: 12th ESVOT Congress; 2004 Sep 10-12; Munich, Germany:
259.
24. Mason DR, Schulz KS, Fujita Y, et al. Measurement of humeroradial and hu-
meroulnar transarticular joint forces in the canine elbow joint after humeral
wedge and humeral slide osteotomies. Vet Surg 2008; 37: 63-70.
25. Fujita Y, Schulz KS, Mason DR, et al. Effect of humeral osteotomy on joint
surface contact in canine elbow joints. Am J Vet Res 2003; 64: 506-511.
26. Fitzpatrick N, Yeadon R, Smith TJ, et al. Techniques of application and initial
clinical experience with sliding humeral osteotomy for treatment of medial
compartment disease of the canine elbow. Vet Surg 2009; 38: 261-278.
Publikationen
56
27. Mason DR, Schulz KS, Samii VF, et al. Sensitivity of radiographic evaluation
of radio-ulnar incongruence in the dog in vitro. Vet Surg 2002; 31: 125-132.
28. Blond L, Dupuis J, Beauregard G, et al. Sensitivity and specificity of radio-
graphic detection of canine elbow incongruence in an in vitro model. Vet
Radiol Ultrasound 2005; 46: 210-216.
29. Holsworth IG, Wisner ER, Scherrer WE, et al. Accuracy of computerized
tomographic evaluation of canine radio-ulnar incongruence in vitro. Vet Surg
2005; 34: 108-113.
30. Kramer A, Holsworth IG, Wisner ER, et al. Computed tomographic evaluation
of canine radioulnar incongruence in vivo. Vet Surg 2006; 35: 24-29.
31. Gemmill TJ, Hammond G, Mellor D, et al. Use of reconstructed computed
tomography for the assessment of joint spaces in the canine elbow. J Small
Anim Pract 2006; 47: 66-74.
32. Wagner K, Griffon DJ, Thomas MW, et al. Radiographic, computed tomo-
graphic, and arthroscopic evaluation of experimental radio-ulnar incongruence
in the dog. Vet Surg 2007; 36: 691-698.
33. Böttcher P, Werner H, Ludewig E, et al. Visual estimation of radio-ulnar incon-
gruence in dogs using three-dimensional image rendering: an in vitro study
based on computed tomographic imaging. Vet Surg 2009; 38: 161-168.
34. Moores AP, Benigni L, Lamb CR. Computed tomography versus arthroscopy
for detection of canine elbow dysplasia lesions. Vet Surg 2008; 37: 390-398.
35. House MR, Marino DJ, Lesser ML. Effect of limb position on elbow congruity
with CT evaluation. Vet Surg 2009; 38: 154-160.
36. Beale BS, Hulse DA, Schulz K, Whitney WO. Small animal arthroscopy.
Philadelphia, PA: Saunders 2003; 51-79.
37. Preston CA, Schulz KS, Kass PH. In vitro determination of contact areas in the
normal elbow joint of dogs. Am J Vet Res 2000; 61: 1315-1321.
Publikationen
57
38. Bardet JF, Bureau S. Fragmentation of the coronoid process in dogs. A case-
control study of 83 elbows treated by shortening osteotomy of the proximal
ulna. Prat Med Et Chir Anim 1996; 31: 451-463.
39. Van Ryssen B, van Bree H. Arthroscopic findings in 100 dogs with elbow
lameness. Vet Rec 1997; 140: 360-372.
40. Mason DR, Schulz KS, Fujita Y, et al. In vitro force mapping of normal canine
humeroradial and humeroulnar joints. Am J Vet Res 2005; 66: 132-135.
41. Hamrick MW. A chondral modeling theory revisited. J Theor Biol 1999; 201:
201-208.
42. Theyse LF, Voorhout G, Hazewinkel HA. Prognostic factors in treating ante-
brachial growth deformities with a lengthening procedure using a circular
external skeletal fixation system in dogs. Vet Surg 2005; 34: 424-435.
43. Lawlor G, Hennessy R, Carr AJ, et al. 3D analysis of elbow joint geometry. In:
16th Meeting of the Northern Ireland Biomedical Engineering Society; 2002
Jan 26-27; Sligo, Ireland: 81.
44. Waide DV, Lawlor GJ, McCormack BA, et al. The relationship between surface
topography and contact in the elbow joint: development of a two-dimensional
geometrical model in the coronal plane. Proc Inst Mech Eng [H] 2000; 214:
413-423.
Diskussion
58
Diskussion
Im Zentrum dieser kumulativen Dissertation steht die Quantifizierung der
Sensitivität und Spezifität der Bestimmung von radioulnaren Gelenkformationen mit
Hilfe von dreidimensionalen Computermodellen sowie der Arthroskopie. Die zur
Diagnostik der RUI vorliegende Literatur befasst sich entweder mit der Bestimmung
von positiven oder negativen Stufen. Die Frage zu den Auswirkungen eines erweiter-
ten Untersuchungsgutes, welches beide Konformationen beinhaltet bleibt offen. In
den vorliegenden Untersuchungen wurden deshalb erstmals neben kongruenten
Gelenken sowohl positive als auch negative RUI berücksichtigt. Die korrekte Fest-
stellung eines kongruenten Gelenkes ist somit in dieser Versuchsanordnung wesent-
lich anspruchsvoller als in vorangegangenen Studien (MASON et al. 2002, BLOND et
al. 2005, HOLSWORTH et al. 2005, KRAMER et al. 2006, WAGNER et al. 2007), da
der Untersucher ein kongruentes Gelenk sowohl als positive RUI als auch als
negative RUI fehlinterpretieren kann.
Die beiden in diese Disseration einfließenden Arbeiten (BÖTTCHER et al. 2009,
WERNER et al. 2009) legen im Detail die verwendeten Materialen sowie die ange-
wandten Methoden und erzielten Ergebnisse dar. Zudem beinhalten sie die für jede
Arbeit spezifischen Diskussionsanteile, insbesondere die methodischen Limitationen,
die es bei der Interpretation zu berücksichtigen gibt. Deshalb beschränkt sich die fol-
gende Diskussion auf ein übergreifendes Beurteilung und Interpretation beider Arbei-
ten.
Anhand der 3D-Modelle konnte insgesamt eine Spezifität von 0,77 (Konfidenz-
intervall (KI) 0,62 - 0,92) bei der Bestimmung eines kongruenten Gelenkes ermittelt
werden. Bei der arthroskopischen Bestimmung lag die Spezifität bei 0,89 (KI 0,67 -
0,97). Dieser insgesamt relativ hohe Anteil an falsch positiven Ergebnissen ist auf die
oben beschriebene Erweiterung des Untersuchungsgutes zurückzuführen. Er zeigt
jedoch auch den deutlichen Unterschied zwischen den beiden Untersuchungs-
Diskussion
59
methoden. In der ersten Studie wurden die Computermodelle auf der Basis von CT-
Daten berechnet, was die Untersuchung der subchondralen Gelenkflächengeometrie
erlaubt. Die in der zweiten Studie angewandte Arthroskopie ermöglicht eine direkte
Visualisierung der chondralen Gelenkflächen bei minimalem chirurgischem Trauma.
Eine Betrachtung der Ergebnisse unter dem Gesichtspunkt, dass der Untersucher
entweder nur zwischen einer kongruenten Gelenkfläche und einer positiven Stufe
oder einer kongruenten Gelenkfläche und einer negativen Stufe unterscheiden muss,
erhöht die Spezifität auf 1,00 beziehungsweise 0,98. Geht man also davon aus, dass
der komplexere Ansatz des AVM dem tatsächlichen klinischen Bild entspricht
(LOZIER 2006), zeigen die erzielten Ergebnisse die Probleme und damit die beste-
henden Unsicherheiten der diagnostischen Möglichkeiten auf. Ein direkter Vergleich
mit Studien, die sich ausschließlich mit der Diagnostik positiver Stufen befassen
(MASON et al. 2002, BLOND et al. 2005, HOLSWORTH et al. 2005, WAGNER et al.
2007), ist durch die Erweiterung des Stufenmodells nicht oder nur eingeschränkt
möglich. Aus diesem Grund soll hier versucht werden, die in den vorliegenden Stu-
dien evaluierten Ergebnisse, basierend auf den 3D-Modellen und den arthros-
kopischen Untersuchungen, mit denen röntgenologischer und zweidimensionaler CT-
Untersuchungen im Einzelnen zu vergleichen.
Fasst man alle inkongruenten Gelenke unserer Studie, sowohl die mit positiver als
auch mit negativer RUI zusammen, kann eine korrekte Beurteilung von inkongruen-
ten Gelenkflächen mit einer medianen Sensitivität von 0,86 anhand der 3D-Modelle
sowie von 0,98 für die Arthroskopie nachgewiesen werden. Der überwiegende Anteil
der inkongruenten Gelenke konnte also als solches erkannt werden. Bei der Beurtei-
lung von kongruenten Gelenken konnte allerdings nur eine Spezifität von 0,77 und
0,89 erreicht werden. Die Ergebnisse sind vergleichbar mit den bisher veröffentlich-
ten Daten aus röntgenologischen und zweidimensionalen CT-Studien (MASON et al.
2002, BLOND et al. 2005, WAGNER et al. 2007). Geht man davon aus, dass auf-
grund der gestellten Diagnose eines inkongruenten Gelenkes entsprechend weiter-
Diskussion
60
führende Therapien, wie z.B. eine Radiusverkürzung oder –verlängerung, eine
dynamische proximale Ulnaosteotomie oder Humerusosteotomie durchgeführt
würden, bleibt festzustellen, dass bei einer Spezifität von 0,77 nach Beurteilung der
3D-Modelle ein Viertel der gesunden Tiere einer invasiven Operation unterzogen
würde, welche nicht indiziert ist. Die arthroskopische Bestimmung zeigt am experi-
mentellen Stufenmodell mit einer Spezifität von 0,89 die Überlegenheit der Methode.
Die nachgewiesene Spezifität verspricht ein hohes Maß an Sicherheit bei der
Anwendung der Methode im klinischen Alltag. Analysiert man die Ergebnisse unserer
Studien ausschließlich hinsichtlich der Diagnose einer positiven RUI, sind beide in
unserer Studie angewandten Methoden der bisher in der Praxis am häufigsten
angewandten und als Goldstandard angesehenen Untersuchungsmethode, der CT,
überlegen (GEMMILL et al. 2005, KRAMER et al. 2006, WAGNER et al. 2007).
Anhand der dreidimensionalen Computermodelle konnte eine mediane Sensitivität
von 0,82 und anhand der arthroskopischen Untersuchungen von 0,98 nachgewiesen
werden. Eine korrekte Bestimmung von RUI ist demnach in der Mehrzahl der Fälle
möglich. Studien, welche anhand von zweidimensionalen CT-Daten positive RUI
diagnostizierten, konnten eine ähnlich gute Sensitivität erzielen (GEMMILL et al.
2005, HOLSWORTH et al. 2005, GEMMILL et al. 2006, WAGNER et al. 2007). Im
Gegensatz dazu konnte die in unseren Untersuchungen nachgewiesene Spezifität
mit zweidimensionalen CT-Daten nicht erreicht werden.
Die klinische Relevanz von milden Ausprägungen von Inkongruenzen des
Ellbogengelenkes ist bis dato nicht endgültig geklärt, so dass eine Differenzierung
zwischen wenig und stark ausgeprägten RUI von 2 mm oder mehr sinnvoll erscheint
(KRAMER et al. 2006, WAGNER et al. 2007). Bei der Bestimmung von eben dieser
ausgeprägten positiven und negativen RUI nimmt die Genauigkeit der semiquantita-
tiven dreidimensionalen und arthroskopischen Bestimmung von RUI in unseren
Studien mit einer Sensitivität von 1,00 weiterhin zu. WAGNER und Mitarbeiter
(WAGNER et al. 2007) konnten bei der Bestimmung von positiven RUI eine ver-
Diskussion
61
gleichbare Sensitivität (0,94), bei guter Spezifität (0,82) erreichen. Damit ist die
Arthroskopie bei der Beurteilung der radioulnaren Gelenkformation allen anderen
bisher untersuchten bildgebenden Verfahren überlegen. Einer der Hauptvorteile der
Arthroskopie ist die direkte Visualisierung der chondralen Gelenkoberfläche. Nach-
teilig ist, dass es sich nichts desto trotz um eine invasive Methode handelt, was ihren
Einsatz als Routineuntersuchung begrenzt (GEMMILL et al. 2006). Da alle in der
Literatur vorliegenden in-vitro Untersuchungen am Ende durch eine Disartikulation
und die direkte Beurteilung der radioulnaren Gelenkflächen validiert wurden, ist dies
für die Diagnostik auch milder RUI der absolute, wenn auch nur theoretische Gold-
standard (MASON et al. 2002, BLOND et al. 2005, HOLSWORTH et al. 2005,
GEMMILL et al. 2006, WAGNER et al. 2007). Aufgrund des invasiven Charakters,
der eine Durchführung am lebenden Patienten nicht möglich macht, hat die drei-
dimensionale Rekonstruktion unserer Studie das Ziel, die radioulnaren Gelenk-
formationen im Zustand einer Disartikulation nicht invasiv zu imitieren. Die Erweite-
rung der CT-gestützten Diagnostik der RUI in der dritten Dimension in Form von hoch
qualitativen, dreidimensionalen Darstellungen der knöchernen Oberfläche von
Radius und Ulna verspricht eine exakte Darstellung der Anatomie der gelenk-
bildenden, subchondralen Gelenkflächen. Wünschenswert wäre die Möglichkeit der
digitalen Vermessung der radioulnaren Gelenkflächen zur Bestimmung der RUI. Als
Hauptproblem stellt sich hierbei die Definition von anatomischen Fixpunkten dar. Als
Folge dieser Einschränkungen wurde bei der vorliegenden Untersuchung eine semi-
quantitative visuelle Bestimmung der radioulnaren Gelenkflächen vorgenommen.
Selbst wenn entsprechende Rassestandards vorliegen würden, ist durch die im Zuge
einer ED auftretenden sekundären arthrotischen Veränderungen und der damit ein-
hergehenden permanenten Veränderungen des subchondralen Knochens ein
präzises Wiedererkennen der entsprechende Messpunkte nahezu unmöglich. Eine
daraus resultierende Konsequenz ist, dass die Genauigkeit der Beurteilung von der
Erfahrung des jeweiligen Untersuchers abhängig ist. MASON und Mitarbeiter (2002)
Diskussion
62
konnten bei röntgenologischen Untersuchungen von RUI nachweisen, dass bei
semiquantitativen Bestimmungen von statistisch signifikanten Unterschieden zwi-
schen verschiedenen Untersuchern ausgegangen werden muss. Der Interklassen-
Korrelationskoeffizient (ICC) bei der Untersuchung der RUI anhand von 3D-Modellen
von 0,87 bescheinigt eine gute Übereinstimmung der Ergebnisse zwischen den drei
Untersuchern. Aufgrund der vorliegenden Ergebnisse ist davon auszugehen, dass
die Methode der semiquantitativen Bestimmung von RUI durch dreidimensional
rekonstruierte CT-Daten zuverlässige und wiederholbar exakte Ergebnisse liefert.
Hervorzuheben ist jedoch, dass die erzielten Sensitivitäten und Spezifitäten die
gewichtigeren Aussagen über die Qualität einer Untersuchungsmethode darstellen.
Das zu erreichende Optimum stellt eine Untersuchungsmethode dar, die von jeder-
mann oder im besten Falle automatisch mit hoher Sicherheit zu verwenden ist.
Auf die Frage, ob die Lagerung und Manipulation der Vordergliedmaße während
der computertomographischen und arthroskopischen Untersuchung Auswirkungen
auf die Ergebnisse hat (WAGNER et al. 2007), kann nach Auswertung dieser Studien
keine eindeutige Antwort gefunden werden. Bei beiden Studien wurden die Glied-
maßen in speziell angefertigten Halterungen befestigt, um eine Vergleichbarkeit der
Ergebnisse zu gewährleisten. Die Auswirkungen der iatrogenen Manipulation
während der Arthroskopie wurden durch ein standardisiertes Untersuchungsprotokoll
reduziert.
Beiden in diese kumulative Dissertation eingegangenen Arbeiten (BÖTTCHER et
al. 2009, WERNER et al. 2009) ist gemein, dass sie ausschließlich in-vitro durchge-
führt wurden. Dies ermöglicht nur eine eingeschränkte Interpretation der Ergebnisse.
Ein weiterer Aspekt, der bei der Interpretation der Ergebnisse zu berücksichtigen ist,
stellt die Verwendung von „gesunden“ Ellbogengelenken dar. Bei der Evaluierung
des experimentellen Stufenmodells konnte zwar nachgewiesen werden, dass die
verschiedenen Gelenkformationen akkurat simuliert werden können, jedoch handelt
es sich dabei um statische Modelle. Es ist davon auszugehen, dass Gelenk-
Diskussion
63
inkongruenzen in einem frühen Stadium der skelettalen Entwicklung auftreten und
die endgültige anatomische Formation der angrenzenden Gelenkflächen nicht nur
durch genetische, nutritive und hormonelle Faktoren beeinflusst werden, sondern vor
allem durch den mechanischen Stimulus geprägt werden (FROST 1979, OGDEN
1980, HAMRICK 1999). Demnach kann anhand dieser Studien nicht beurteilt
werden, inwieweit sekundäre arthrotische Veränderungen und adaptive Prozesse die
Beurteilung der radioulnaren Gelenkformation sowohl im 3D-Modell als auch in der
arthroskopischen Untersuchung beeinflussen. Weiterhin spiegeln keine der bisher
veröffentlichten Ergebnisse die exakten Gelenkformationen des Ellbogens während
des komplexen Bewegungsablaufes wieder. Grundsätzlich muss bei der Beurteilung
von Kongruenzen oder Inkongruenzen des Ellbogengelenkes hinterfragt werden, ob
die Fokussierung auf die Bestimmung der radioulnaren Gelenkformation im Ergebnis
zielführend ist. Zukünftige Studien sollten demnach die Komplexität aus Gelenkkon-
gruenz, Gelenkstabilität, Gelenkskinematik und funktioneller Achse von Brachium
und Antebrachium berücksichtigen, wenn sie substantiell zur Verbesserung des Ver-
ständnisses der ED beitragen wollen.
Zusammenfassend ist zu sagen, dass sich beide angewandten Untersuchungs-
methoden zur präzisen Beurteilung von positiven und negativen RUI eignen. Basie-
rend auf den in den vorliegenden Arbeiten gewonnenen Erkenntnissen und den Er-
gebnissen vorangegangener Studien sollte zum momentanen Zeitpunkt die Beurtei-
lung der radioulnaren Gelenkformation mittels dreidimensionaler CT-Modelle und an-
schließender arthroskopischen Untersuchung erfolgen. Diese Kombination bietet die
Möglichkeit der Beurteilung sowohl der subchondralen als auch der chondralen Ge-
lenkflächen. Bezüglich der dreidimensional rekonstruierten CT-Daten fehlt es weiter-
hin an definierten, auch am veränderten Gelenk gut und sicher aufzufindenden ana-
tomischen „Landmarks“. Die entsprechende Datenverarbeitung zur Berechung der
notwendigen 3D-Modelle ist allerdings bisher nur unter Studienbedingungen möglich.
Zusammenfassung
64
4 Zusammenfassung
Hinnerk Werner
Sensitivität und Spezifität von Arthroskopie und dr eidimensional
rekonstruierten CT-Modellen zur Bestimmung der radi oulnaren Inkongruenz
am kaninen Ellbogengelenk: eine In-vitro-Studie
Klinik für Kleintiere der Veterinärmedizinischen Fa kultät der Universität Leipzig
Eingereicht im März 2011
(67 Seiten, 10 Abbildungen, 3 Tabellen, 108 Literaturangaben)
Schlüsselwörter: Ellbogengelenk – radioulnare Inkongruenz – Arthroskopie – dreidi-
mensional rekonstruierte CT-Modelle - Hund
Zielstellung: Bei der Frage, ob die Durchführung von Korrekturosteotomien zur Ent-
lastung betroffener Areale bei Hunden mit ED sinnvoll ist, erscheint es uns von
zentraler Bedeutung, auch eine geringgradig ausgeprägte RUI präzise zu bestim-
men. In der vorliegenden Arbeit wurden deshalb folgende Ziele verfolgt: (1) Evaluie-
rung der Sensitivität und Spezifität der Bestimmung von radioulnaren Gelenks-
formationen anhand von dreidimensionalen CT-Modellen und der Arthroskopie. (2)
Erweiterung des Untersuchungsgutes, da im Gegensatz zu vorangegangenen Stu-
dien sowohl Inkongruenzen mit verkürztem Radius (positive RUI) als auch mit ver-
kürzter Ulna (negative RUI) einbezogen wurden.
Material und Methode: In das Untersuchungsgut gingen Vordergliedmaßen gesun-
der Hunde mittelgroßer und großer Rassen ein. Mit Hilfe eines etablierten Modells
wurde experimentell der Radius stufenweise um 1 und 2 mm verkürzt, bzw. verlän-
gert. In der ersten Studie wurden 64 radioulnare Gelenksformationen anhand von
dreidimensional rekonstruierter CT-Modelle untersucht. In der zweiten Studie wurden
Zusammenfassung
65
72 radioulnare Gelenksformationen arthroskopisch beurteilt. Die Art der Stufe und ih-
re Reihenfolge waren jeweils randomisiert und geblindet. Die Gelenksformationen
wurden als -2, -1, 0, 1 und 2 mm Stufe klassifiziert.
Ergebnisse: Für die Bestimmung der radioulnaren Gelenksformation anhand von
dreidimensional rekonstruierter CT-Modelle konnte ein Interklassen-Korrelations-
koeffizient von 0,87 und ein Intraklassen-Korrelationskoeffizient von 0,96 ermittelt
werden. Die mediane Sensitivität im Hinblick auf das Erkennen eines inkongruenten
Gelenkes lag bei 0,86 (0,82 - 0,98). Die mediane Spezifität bei 0,77 (0,62 - 0,92). Bei
der Arthroskopie konnte ein kongruentes Gelenk mit einer Sensitivität von 0,98 (95%
KI: 0,90 - 0,99) bestimmt werden. Die Spezifität ein kongruentes Gelenke richtig zu
diagnostizieren, lag bei 0,89 (95% KI: 0,65 – 0,98).
Schlussfolgerungen: Die Abweichungen zwischen den drei Untersuchern in der
ersten Studie legen nahe, dass die Genauigkeit der Bestimmung von radioulnaren
Inkongruenzen durch entsprechendes Training deutlich verbessert werden können.
Die besten Ergebnisse konnte der Untersucher erzielen, der sich am längsten mit der
beschriebenen Technik befasst hatte. Wir postulieren daher, dass die Genauigkeit
der semiquantitativen Beurteilung der RUI anhand dreidimensional rekonstruierter
CT-Modelle bei regelmäßiger Schulung zunimmt. Dieses Diagnostikum ist in-vitro
präzise, wiederholbar und ermöglicht eine nicht invasive Beurteilung der subchondra-
len Gelenkflächen.
Die Arthroskopie erlaubt eine direkte Visualisierung und Palpation der intraartiku-
lären Strukturen und eine präzise Bestimmung sowohl einer positiven als auch
negativen RUI. Festzuhalten bleibt, dass es eine minimal invasive Technik ist und
sich somit als Standard- beziehungsweise Vorsorgeuntersuchung zur Diagnostik der
ED beim Hund kaum eignet. Im Vergleich zu Röntgen- und CT-Untersuchungen kön-
nen mittels Arthroskopie jedoch die besten Ergebnisse zur Bestimmung der radio-
ulnaren Gelenksformation in-vitro erzielt werden.
Summary
66
5 Summary
Hinnerk Werner
Sensitivity and specificity of arthroscopy and thre e-dimensional image render-
ings for estimation of radioulnar incongruence of t he canine elbow joint: an in
in-vitro study
Department of Small Animal Medicine, Faculty of Vet erinary Medicine, Univer-
sity of Leipzig
Submitted in March 2011
(67 pages, 10 figures, 3 tables, 108 references)
Keywords: elbow joint – radioulnare incongruence – arthroscopy – three-dimensional
image rendering based on computed tomography – dog
Objective: The ability to detect mild incongruence is especially relevant when con-
sidering procedures to modify load distribution in dysplastic elbows. Aims of the
present studies were: (1) to determine the sensitivity and specificity of three-
dimensional image renderings based on computed tomography imaging and arthro-
scopy for diagnosing experimentally induced radioulnar incongruence (RUI) in the
canine elbow joints in-vitro. (2) In extension to preceding studies, we examined a
short ulna (negative RUI) and a short radius scenario (positive RUI).
Material and methods: Cadaver thoracic limbs free of degenerative joint disease
were harvested from adult middle large to large bread dogs. To shorten and lengthen
the radius by 1 and 2 mm increments we used an established experimental model.
In the first study we investigated radioulnar joint conformation by three-
dimensional image renderings in vitro. A total of 64 steps were evaluated. In the sec-
Summary
67
ond study 72 radioulnar joint conformations were arthroscopically measured in vitro.
Estimation of radioulnar joint conformation was blindly evaluated in a random manner
and performed at 1mm increment (-2, -1, 0, 1, 2).
Results: For the estimation of radioulnar joint conformation by three-dimensional
image renderings the inter-observer intraclass correlation coefficient was 0.87.
Repeatability was 0.96. The median sensitivity for correct identifying an incongruent
joint was 0.86 (range 0.82 - 0.98), median specificity was 0.77 (range 0.62 - 0.92).
For arthroscopy the sensitivity for identification of an incongruent joint was 0.98
(95% CI: 0.90 to 0.99). The specificity for identification of a congruent joint was 0.89
(95% CI: 0.65 to 0.98).
Conclusions: In the first study the wide ranges in our results between the three
observers suggest that estimation of radioulnar incongruence on three-dimensional
image renderings may be dramatically increased by training. The best results were
obtained by the person who had the most experience with this technique. This is why
we hypothesize that every investigator would gain similar confidence after appropri-
ate training. The technique is precise, reliable and repeatable in-vitro and mimics
gross inspection of the subchondral joint surfaces in a noninvasive manner.
Arthroscopy allows for direct visualisation of the intra-articular structures and pre-
cise estimation of positive as well as negative RUI. However, it is a minimally inva-
sive technique and so far not widely applicable as a screening tool for ED. In com-
parison to radiography and computed tomography, arthroscopy shows the highest
diagnostic value in-vitro.
Literaturverzeichnis
68
6 Literaturverzeichnis
Bardet JF. Arthroscopie diagnostique de l'epaule chez le chien. Prat Med Et Chir Anim. 1995;30:47-54.
Bardet JF. Arthroscopy of the elbow in dogs part 1. The normal arthroscopic anatomy using the craniolateral portal. Vet Comp Orthop Traumatol. 1997;10(1):5-9.
Beale BS, Hulse DA, Schulz K, Whitney WO. Small animal arthroscopy. 1. Aufl. Philadelphia: Saunders; 2003.
Behrends I. Arthroskopische Untersuchungen des Knie-, Schulter- und Ellbogen-gelenkes des Hundes [Dissertation med. vet]. Hannover: Tierärztliche Hochschule; 1996.
Blond L, Dupuis J, Beauregard G, Breton L, Moreau M. Sensitivity and specificity of radiographic detection of canine elbow incongruence in an in vitro model. Vet Radiol Ultrasound. 2005;46(3):210-6.
Böttcher P, Werner H, Ludewig E, Grevel V, Oechtering G. Visual estimation of radioulnar incongruence in dogs using three-dimensional image rendering: an in vitro study based on computed tomographic imaging. Vet Surg. 2009;38(2):161-8.
Boulay JP. Fragmented medial coronoid process of the ulna in the dog. Vet Clin North Am Small Anim Pract. 1998;28(1):51-74.
Braden TD, Stickle RL, Dejardin LM, Mostosky UV. The use of computed-tomography in fragmented coronoid disease - a case-report. Vet Comp Orthop Traumatol. 1994;7(1):40-4.
Brunnberg L, Viehmann B, Waibl H. Computergestützte Auswertung von Röntgen-bildern zur Erfassung von Parametern der Ellbogengelenksdysplasie; Teil 2: Stufe im Gelenk. Kleintierpraxis. 1999;44(9):637-46.
Carpenter LG, Schwarz PD, Lowry JE, Park RD, Steyn PF. Comparison of radiologic imaging techniques for diagnosis of fragmented medial coronoid process of the cubital joint in dogs. J Am Vet Med Assoc. 1993;203(1):78-83.
Carrig CB, Morgan JP. Asynchronous growth of canine radius and ulna - early radio-graphic changes following experimental retardation of longitudinal growth of ulna. Veterinary Radiology. 1975;16(4):121-9.
Cook CR, Cook JL. Diagnostic imaging of canine elbow dysplasia: a review. Vet Surg. 2009;38(2):144-53.
Danielson KC, Fitzpatrick N, Muir P, Manley PA. Histomorphometry of fragmented medial coronoid process in dogs: a comparison of affected and normal coronoid processes. Vet Surg. 2006;35(6):501-9.
Ellenberger W, Baum H. Handbuch der vergleichenden Anatomie der Haustiere. 18. Auflage. Berlin, Heidelberg, New York: Springer Verlag; 1974.
Fox SM, Blommberg MS, Bright RM. Development anomalies of the canine elbow. J Am Vet Med Assoc. 1983(19):605-15.
Frost HM. A chondral modeling theory. Calc. Tissue Intl. 1979;28:181-200.
Literaturverzeichnis
69
Gemmill TJ, Clements DN. Fragmented coronoid process in the dog: is there a role for incongruency? J Small Anim Pract. 2007;48(7):361-8.
Gemmill TJ, Hammond G, Mellor D, Sullivan M, Bennett D, Carmichael S. Use of re-constructed computed tomography for the assessment of joint spaces in the canine elbow. J Small Anim Pract. 2006;47(2):66-74.
Gemmill TJ, Mellor DJ, Clements DN, Clarke SP, Farrell M, Bennett D, Carmichael S. Evaluation of elbow incongruency using reconstructed CT in dogs suffering fragmented coronoid process. J Small Anim Pract. 2005;46(7):327-33.
Gielen I, van Ryssen B, van Bree H. Arthrology-diagnostic imaging: is CT the answer? Proceedings of the 12th European Society of Veterinary Orthopaedics and Traumatology (ESVOT) Congress; 2004 Sep 10-12; Munich, Germany; 2004. p. 140.
Goring RL, Price C. Arthroscopical examination of the canine scapulohumeral joint. J Am Anim Hosp Assoc. 1987;23(5):551-5.
Grondalen J. Arthrosis in the elbow joint of young rapidly growing dogs. VI. Inter-relation between clinical, radiographical and pathoanatomical findings. Nord Vet Med. 1982;34(3):65-75.
Grondalen J, Lingaas F. Arthrosis in the elbow joint of young rapidly growing dogs - a genetic investigation. J Small Anim Pract. 1991;32(9):460-4.
Guthrie S. Use of a radiographic scoring technique for the assessment of dogs with elbow osteochondrosis. J Small Anim Pract. 1989;30(11):639-44.
Guthrie S, Pidduck HG. Heritability of elbow osteochondrosis within a closed population of dogs. J Small Anim Pract. 1990;31(2):93-6.
Hamrick MW. A chondral modeling theory revisited. J Theor Biol. 1999;201(3):201-8.
Hayes CW, Conway WF. Evaluation of articular cartilage: radiographic and cross-sectional imaging techniques. Radiographics. 1992;12(3):409-28.
Hazewinkel HA. Nutrition and skeletal development: recent advances. Proceedings of the 12th European Society of Veterinary Orthopaedics and Traumatology (ESVOT) Congress; 2004 Sep 10-12; Munich, Germany; 2004. p. 56-9.
Hazewinkel HA. Elbow dysplasia; definitions and clinical diagnoses. Proceedings of the 23rd annual meeting of the International Elbow Working Group (IEWG); 2008 August 20; Dublin, Ireland; 2008. p. 8-12.
Hazewinkel HA, Meij BP, Nap RC. Radiographic views for elbow dysplasia screening in Bernese Mountain Dogs. Vet Comp Orthop Traumatol. 1996(9):66-8.
Henry WB, Jr. Radiographic diagnosis and surgical management of fragmented medial coronoid process in dogs. J Am Vet Med Assoc. 1984;184(7):799-805.
Henschel E. Anatomical and clinical aspects of the growing lower-arm bones, com-pared with distractio cubiti of the dog and Mandelung's deformity in man. Arch Exp Veterinarmed. 1972;26(5):741-87.
Heron CW, Calvert PT. 3-dimensional gradient-echo MR imaging of the knee - com-parison with arthroscopy in 100 patients. Radiology. 1992;183(3):839-44.
Literaturverzeichnis
70
Herzog RJ. Magnetic resonance imaging of the elbow. Magn Reson Q. 1993;9(3):188-210.
Holsworth IG, Wisner ER, Scherrer WE, Filipowitz D, Kass PH, Pooya H, Larson RF, Schulz KS. Accuracy of computerized tomographic evaluation of canine radio-ulnar incongruence in vitro. Vet Surg. 2005;34(2):108-13.
House MR, Marino DJ, Lesser ML. Effect of limb position on elbow congruity with CT evaluation. Vet Surg. 2009;38:154-60.
Hulse D. Coronoid disease: What is the clinical pathology? Proceedings of the 14th American Collge of Veterinary Surgeons (ACVS) Veterinary Symposium; 2004 Oct 6-9; Denver, Colorado; 2004. p. 334-6.
Janthur I, Meyer-Lindenberg A, Fehr M. Arthroscopic diagnosis of canine elbow joint diseases. Tierärztl Prax. 2000;28(1):11-8.
Janutta V, Hamann H, Klein S, Tellhelm B, Distl O. Genetic analysis of three different classification protocols for the evaluation of elbow dysplasia in German shepherd dogs. J Small Anim Pract. 2006;47(2):75-82.
Keller GG, Kreeger JM, Mann FA, Lattimer JC. Correlation of radiographic, necropsy and histologic findings in 8 dogs with elbow dysplasia. Vet Radiol Ultrasound. 1997;38(4):272-6.
Kirberger RM, Fourie SL. Elbow dysplasia in the dog: pathophysiology, diagnosis and control. J S Afr Vet Assoc. 1998;69:43–54.
Körbel J, Wilcken R, Huskamp B. Computertomographische Diagnostik am Ellbogengelenk des Hundes. Kleintierpraxis. 2001;46(6):325-31.
Kramer A, Holsworth IG, Wisner ER, Kass PH, Schulz KS. Computed tomographic evaluation of canine radioulnar incongruence in vivo. Vet Surg. 2006;35(1):24-9.
Kramer J, Stiglbauer R, Engel A, Prayer L, Imhof H. MR contrast arthrography (MRA) in osteochondrosis dissecans. J Comput Assist Tomogr. 1992;16(2):254-60.
Lozier SM. How I treat elbows in the older canine patient and new prospectives in elbow dysplasia. Proceedings of the 13th European Society of Veterinary Ortho-paedics and Traumatology (ESVOT) Congress; 2006 Sep 7-10; Munich, Germany; 2006. p. 93-6.
Mason DR, Schulz KS, Samii VF, Fujita Y, Hornof WJ, Herrgesell EJ, Long CD, Morgan JP, Kass PH. Sensitivity of radiographic evaluation of radio-ulnar incongruence in the dog in vitro. Vet Surg. 2002;31(2):125-32.
Meyer-Lindenberg A, Fehr M, Nolte I. Co-existence of ununited anconeal process and fragmented medial coronoid process of the ulna in the dog. J Small Anim Pract. 2006;47(2):61-5.
Meyer-Lindenberg A, Langhann A, Fehr M, Nolte I. Arthrotomy versus arthroscopy in the treatment of the fragmented medial coronoid process of the ulna (FCP) in 421 dogs. Vet Comp Orthop Traumatol. 2003;16(4):204-10.
Morgan JP, Wind A, Davidson AP. Bone dysplasias in the Labrador Retriever: a radiographic study. J Am Anim Hosp Assoc. 1999;35(4):332-40.
Literaturverzeichnis
71
Murphy ST, Lewis DD, Shiroma JT, Neuwirth LA, Parker RB, Kubilis PS. Effect of radiographic positioning on interpretation of cubital joint congruity in dogs. Am J Vet Res. 1998;59(11):1351-7.
Nickel R, Schummer A, Seiferle E. Lehrbuch der Anatomie der Haustiere. Band 1: Bewegungsapparat. 6. Auflage. Berlin: Paul Parey; 1992.
Ogden JA. Chondro-osseous development and growth. In: Urist MR, Hrsg. Funda-mental and Clinical Bone Physiology. 1. Aufl. Philadelphia: JB Lippincott; 1980. p. 108-71.
Olson NC, Carrig CB, Brinker WO. Asynchronous growth of the canine radius and ulna: effects of retardation of longitudinal growth of the radius. Am J Vet Res. 1979;40(3):351-5.
Olsson NC. Asynchronous growth of the canine radius and ulna: Surgical correction following experimental premature closure of the distal radial physis. Vet Surg. 1981;10:125–31.
Olsson SE. The early diagnosis of fragmented coronoid process and osteochondritis dissecans of the canine elbow joint. J Am Anim Hosp Assoc. 1983;19(5):616-26.
Olsson SE. General and aetiologic factors in canine osteochondrosis. Vet Q. 1987(9):268-78.
Padgett GA, Mostosky UV, Probst CW, Thomas MW, Krecke CF. The inheritance of osteochondritis-dissecans and fragmented coronoid process of the elbow joint in Labrador Retrievers. J Am Anim Hosp Assoc. 1995;31(4):327-30.
Pavlov H, Ghelman B, Warren RF. Double-contrast arthrography of the elbow. Radiology. 1979;130(1):87-95.
Person MW. Arthroscopy of the canine shoulder joint. Compend Contin Educ Vet. 1986;8(8):537-46.
Person MW. Arthroscopic treatment of osteochondritis dissecans in the canine shoulder. Vet Surg. 1989;18(3):175-89.
Polikeit A, Ferguson SJ, Schawalder P. Elbow dysplasia in the dog: finite element analysis. Biomed Tech (Berl). 2007;52(4):308-14.
Potter HG, Weiland AJ, Schatz JA, Paletta GA, Hotchkiss RN. Posterolateral rotatory instability of the elbow: usefulness of MR imaging in diagnosis. Radiology. 1997;204(1):185-9.
Preston CA, Schulz KS, Taylor KT, Kass PH, Hagan CE, Stover SM. In vitro experimental study of the effect of radial shortening and ulnar ostectomy on contact patterns in the elbow joint of dogs. A J Vet Res. 2001;62(10):1548-56.
Reichle JK, Park RD, Bahr AM. Computed tomographic findings of dogs with cubital joint lameness. Vet Radiol Ultrasound. 2000;41(2):125-30.
Rovesti GL, Biasibetti M, Schumacher A, Fabiani M. The use of the computed tomography in the diagnostic protocol of the elbow in the dog: 24 joints. Vet Comp Orthop Traumatol. 2002;15(1):35-43.
Literaturverzeichnis
72
Samoy Y, Van Ryssen B, Gielen I, Walschot N, van Bree H. Review of the literature: elbow incongruity in the dog. Vet Comp Orthop Traumatol. 2006;19(1):1-8.
Singson RD, Feldman F, Rosenberg ZS. Elbow joint - assessment with double-contrast CT arthrography. Radiology. 1986;160(1):167-73.
Sjostrom L, Kasstrom H, Kallberg M. Ununited anconeal process in the dog - pathogenesis and treatment by osteotomy of the ulna. Vet Comp Orthop Traumatol. 1995;8(4):170-6.
Snaps FR, Balligand MH, Saunders JH, Park RD, Dondelinger RF. Comparison of radiography, magnetic resonance imaging, and surgical findings in dogs with elbow dysplasia. Am J Vet Res. 1997;58(12):1367-70.
Snaps FR, Saunders JH, Park RD, Daenen B, Balligand MH, Dondelinger RF. Com-parison of spin echo, gradient echo and fat saturation magnetic resonance imaging sequences for imaging the canine elbow. Vet Radiol Ultrasound. 1998;39(6):518-23.
Tromblee TC, Jones JC, Bahr AM, Shires PK, Aref S. Effect of computed tomography display window and image plane on diagnostic certainty for characteristics of dysplastic elbow joints in dogs. Am J Vet Res. 2007;68(8):858-71.
Tyrrell RL, Gluckert K, Pathria M, Modic MT. Fast three-dimensional MR imaging of the knee: comparison with arthroscopy. Radiology. 1988;166(3):865-72.
van Bree H, van Ryssen B. Diagnostic and surgical arthroscopy in osteochondrosis lesions. Vet Clin North Am Small Anim Pract. 1998;28(1):161-89.
van Ryssen B. Role of arthroscopy in elbow diseases in the dog. Proceedings of the12th International Small Arthroscopy workshop, refresher course; 2001; University of Ghent, Belgium; 2001. p. 24-9.
van Ryssen B, van Bree H. Arthroscopic evaluation of osteochondrosis lesions in the canine hock joint - a review of 2 Cases. J Am Anim Hosp Assoc. 1992;28(4):295-9.
van Ryssen B, van Bree H. Arthroscopic findings in 100 dogs with elbow lameness. Vet Rec. 1997;140(14):360-72.
van Ryssen B, van Bree H, Missinne S. Successful arthroscopic treatment of shoulder osteochondrosis in the dog. J Small Anim Pract. 1993a;34(10):521-8.
van Ryssen B, van Bree H, Simoens P. Elbow arthroscopy in clinically normal dogs. Am J Vet Res. 1993b;54(1):191-8.
van Ryssen B, van Bree H, Vyt P. Arthroscopy of the canine hock joint. J Am Anim Hosp Assoc. 1993c;29(2):107-15.
Wagner K, Griffon DJ, Thomas MW, Schaeffer DJ, Schulz K, Samii VF, Necas A. Radiographic, computed tomographic, and arthroscopic evaluation of experimental radio-ulnar incongruence in the dog. Vet Surg. 2007;36(7):691-8.
Weigel JP. Growth deformities. Vet Clin North Am Small Anim Pract. 1987;17(4):905-22.
Weishaupt D, Wildermuth S, Schmid M, Hilfiker PR, Hodler J, Debatin JF. Virtual MR arthroscopy: new insights into joint morphology. J Magn Reson Imaging. 1999;9(6):757-60.
Literaturverzeichnis
73
Werner H, Winkels P, Grevel V, Oechtering G, Böttcher P. Sensitivity and specificity of arthroscopic estimation of positive and negative radio-ulnar incongruence in dogs. An in vitro study. Vet Comp Orthop Traumatol. 2009;22(6):437-41.
Wind AP. Elbow incongruity and developmental elbow diseases in the dog.1. J Am Anim Hosp Assoc. 1986;22(6):711-24.
Wind AP, Packard ME. Elbow incongruity and developmental elbow diseases in the dog.2. J Am Anim Hosp Assoc. 1986;22(6):725-30.
74
Danksagung
An erster Stelle möchte ich mich bei Herrn Prof. Dr. Gerhard Oechtering für die Mög-
lichkeit der Anfertigung der Dissertation an der Klinik für Kleintiere der Universität
Leipzig bedanken.
Bedanken möchte ich mich bei Frau Prof. Dr. Vera Grevel für die Unterstützung und
die kritische Auseinandersetzung mit dem Thema.
Mein besonderer Dank geht an meinen Betreuer Dr. med. vet. habil. Peter Böttcher
für die Überlassung des Themas, die ständige kompetente fachliche Betreuung, die
wertvollen Ratschläge und die fortwährende Hilfsbereitschaft. Durch ihn wurde mein
Interesse an der Kleintiermedizin und insbesondere der Kleintierchirurgie geweckt. Er
prägte als mein Mentor mein fachliches und wissenschaftliches Wissen und Arbeiten.
Ein weiterer großer Dank geht an die Mitarbeiterinnen und Mitarbeiter der Klinik für
Kleintiere der Universität Leipzig, insbesondere an alle Mitarbeiter der chirurgischen
Abteilung für die freundliche und angenehme Arbeitsatmosphäre.
Besonders herzlich danke ich meiner Familie, vor allem meiner Frau Dr. Anke Willms
und meinen Freunden, die mir immer geduldig und hilfreich zur Seite standen. Ohne
sie wäre all dies nicht möglich gewesen.