DIN Connector p2-25 - 京セラ株式会社›®次(INDEX) Series タイプ Type 形状 Shape...
Transcript of DIN Connector p2-25 - 京セラ株式会社›®次(INDEX) Series タイプ Type 形状 Shape...
目 次(INDEX)
Seriesタイプ Type形状 Shape
8272ハンダ付 DIN-Qタイプ Soldering DIN-Q type
4プラグ2列ストレート Vertical type 2-row Plug
8272ハンダ付/ワイヤーラッピング 拡張DIN-Nタイプ Soldering/Wire wrapping Extended DIN-N type
5プラグ2列ストレート Vertical type 2-row Plug
8272ハンダ付 DIN-B/拡張DIN-Nタイプ Soldering DIN-B/Extended DIN-N type
6プラグ2列ライトアングル Right Angle type 2-row Plug
8345ハンダ付 DIN-B/拡張DIN-Nタイプ Soldering DIN-B/Extended DIN-N type
7リセプタクル2列ストレート Vertical type 2-row Receptacle
8345ハンダ付 DIN-Qタイプ Soldering DIN-Q type
8リセプタクル2列ライトアングル Right Angle type 2-row Receptacle
8345ハンダ付 拡張DIN-Nタイプ Soldering Extended DIN-N type
9リセプタクル2列ライトアングル Right Angle type 2-row Receptacle
8272ハンダ付 DIN-Rタイプ Soldering DIN-R type
10プラグ3列ストレート Vertical type 3-row Plug
8272ハンダ付/ワイヤーラッピング 拡張DIN-Nタイプ Soldering/Wire wrapping Extended DIN-N type
11プラグ3列ストレート Vertical type 3-row Plug
8272ハンダ付 DIN-Cタイプ Soldering DIN-C type
12プラグ3列ライトアングル Right Angle type 3-row Plug
8345ハンダ付/ワイヤーラッピング DIN-Cタイプ Soldering/Wire wrapping DIN-C type
13リセプタクル3列ストレート Vertical type 3-row Receptacle
8272ハンダ付 DIN-Cタイプ Soldering DIN-C type
14プラグ3列ライトアングル Right Angle type 3-row Plug
8272プレスフィット DIN-Qタイプ Press-fit DIN-Q type
15プラグ2列 2-row Plug
8272プレスフィット 拡張DIN-Nタイプ Press-fit Extended DIN-N type
16プラグ2列 2-row Plug
8345プレスフィット DIN-B/拡張DIN-Nタイプ Press-fit DIN-B/Extended DIN-N type
17リセプタクル2列 2-row Receptacle
8272プレスフィット DIN-Rタイプ Press-fit DIN-R type
18プラグ3列 3-row Plug
8272プレスフィット 拡張DIN-Nタイプ Press-fit Extended DIN-N type
19プラグ3列 3-row Plug
8345プレスフィット DIN-Cタイプ Press-fit DIN-C type
20リセプタクル3列 3-row Receptacle
8272ハンダ付/プレスフィット エジェクター付 Soldering/Press-fit with an ejector
21プラグ3列 3-row Plug
8272エジェクター付 With an ejector
22プラグウエハー3列 Wafer type 3-row Plug
8455圧着タイプ Crimping type
23リセプタクルインシュレータ2列 2-row Receptacle insulator
8455圧着タイプ Crimping type
24リセプタクルインシュレータ3列 3-row Receptacle insulator
Note 25
アプリケーション Application 26
1
DINコネクターについて/DIN Connectors 2仕様/Spec sheet 3
Page
DIN Connectors
2
Accompanied by the globalization of the electronics industry, it is required for connector manufacturers to establish standards that can becomparable to international ones to assure reliability in metal-to-metal contact and high cost efficiency. It is the connectors that are compliant toDIN41612 standards to satisfy the conditions aforementioned.German industry standards are dominant and now adopted in worldwide let alone European countries, and DIN connectors are compliant to thestandards. Having features such as suitable for high density package, low force to connect, two-piece type, and 2/3 rows of pi n array, DINconnectors are less-troubled product in mounting on printed circuit boards, and the structure enables perfect mating and appropriate contact of theconnectors.DIN connectors supplied by us (KYOCERA Corporation) have a wide variety of types including crimping type, IDC type, and the one applicable to coaxial and a large current cables, based on DIN type and its varieties.
Varieties of DIN Connectorsタイプ(Type) 列(Row) プラグ(Plug) リセプタクル(Receptacle)
DIN-B 2ライトアングルタイプ(Right Angle) ストレートタイプ(Vertical)
DIN-C 3
DIN-Q 2ストレートタイプ(Vertical) ライトアングルタイプ(Right Angle)
DIN-R 3
拡張DIN-N 2/3(Extended DIN-N)DIN規格41612に準拠し,独自に開発した製品で、ストレート/ライトアングルがあります。(DIN 41612 compliant product originally developed by us. Both Vertical and Right Angle types are available.)
圧着(Crimping) 2/3 (他のDINシリーズのプラグと嵌合)(Mated to other DIN type plugs) ○
DIN-M(同軸/高電流用)DIN-M(For coaxial/ 3 ライトアングルタイプ(Right Angle) ストレートタイプ(Vertical)a large current cables)
Kinked Contact and One Touch Lock Metal TabIn order to prevent inappropriateness in soldered posture of connectors on the printed circuit boards, kinked contacts are applied to the vertical typeleads and the one touch lock metal tabs are equipped in the right angle type connectors. The kinked contact is applied for the corner pins, 4 pins.Two metal tabs both ends of a connector are equipped for one touch locking function. The diameter of the holes for the metal tabs are common withthe ones for screws used in existing connectors that are not equipped with the one touch lock structure.
Kinked Contacts One Touch Lock Metal Tabs
3
仕 様(Spec Sheet)
ハンダ付ワイヤーラッピングタイプSoldering/Wire wrapping type極間隔 2.54×2.54mmPitch定格電流※Rated current* 3A max.
耐電圧 AC 1000V rmsDielectric withstanding voltage接触抵抗Contact resistance 15mΩ or less
材質: 耐熱樹脂インシュレーター Material: Heat-resistant plasticInsulator UL grade: 94V-0
Color: WhiteMaterial:プラグ 銅合金Plug Copper alloyリセプタクル 銅合金Rece. Copper alloy
コンタクト Plating:Contact 接触部 部分金メッキ
Contacting area Partly Au Platedポスト部 スズ銅または金フラッシュメッキPost area Sn-Cu plated or Au flash plated全体 ニッケル下地メッキWhole Nickel undercoat
適用基板厚 1.6mm以下または2.4mm以下Applicable board thickness 1.6mm or less, or 2.4mm or less
プレスフィットタイプPress-fitting type極間隔 2.54×2.54mmPitch定格電流※Rated current* 3A max.
耐電圧 AC 1000V rmsDielectric withstanding voltage接触抵抗Contact resistance 15mΩ or less
材質: 耐熱樹脂インシュレーター Material: Heat-resistant plasticInsulator UL grade: 94V-0
Color: WhiteMaterial:プラグ 銅合金Plug Copper alloyリセプタクル 銅合金Rece. Copper alloy
コンタクト Plating:Contact 接触部 部分金メッキ
Contacting area Partly Au Platedポスト部 スズ銅メッキPost area Sn-Cu plated全体 ニッケル下地メッキWhole Nickel undercoat
ポスト圧入保持力 圧入力:20kg/pin以下Force to press-in and Force to press-in: 20kg/pin or lessretain the post 保持力:3.0kg/pin以上
Force to retain: 3.0kg/pin or more適用スルーホール 下穴径:φ1.0±0.02Applicable through hole Diameter of prepared hole: ø1.0±0.02
仕上径:φ0.9+0.05-0.1
Diameter of finished hole: ø1.0 +0.05/-0.1銅メッキ:25~76μmCopper plating: 25 to 76μmハンダメッキ:7.6μmSolder plating: 7.6μm
適用基板材質 FR-4、G-10Applicable board material適用基板厚 1.6±0.15~3.2±0.2mmApplicable board thickness
圧着タイプCrimped type極間隔 2.54×2.54mmPitch定格電流※Rated current* 3A max.
耐電圧 AC 1000V rmsDielectric withstanding voltage接触抵抗Contact resistance 20mΩ or less
材質: 耐熱樹脂インシュレーター Material: Heat-resistant plasticInsulator UL grade: 94V-0
Color: White材質: 銅合金Material: Copper alloyPlating:
コンタクト 接触部 部分金メッキ
Contact Contacting area Partly Au Plated圧着部 スズ銅メッキCrimping area Sn-Cu plated全体 ニッケル下地メッキWhole Nickel undercoat
適用電線 AWG#22~28Applicable wire仕上り被覆外径 φ1.5mm以下Outside diameter of finished ø1.5mm or lesscovered wire
圧接タイプIDC type極間隔 2.54×2.54mmPitch定格電流※Rated current* 3A max.
耐電圧 AC 1000V rmsDielectric withstanding voltage材質: 耐熱樹脂
インシュレーター Material: Heat-resistant plasticInsulator UL grade: 94V-0
Color: White材質:銅合金Material: Copper alloyメッキ:Plating:
コンタクト 接触部 部分金メッキContact Contacting area Partly Au Plated
ポスト部 スズ銅または金フラッシュメッキPost area Sn-Cu plated or Au flash plated全体 ニッケル下地メッキWhole Nickel undercoat
適用電線 AWG#28、7本/0.127mmApplicable wire 7 leads of AWG #28/0.127mm
スズメッキ軟銅撚線Sn plated annealed copper twisted wire絶縁体:耐熱PVCInsulator: Heat resistance PVC導体ピッチ:1.27±0.05mmConductor pitch: 1.27±0.05mm
※定格電流:UL規格に準拠する場合は最大1.5A。IEC/DIN規格に準拠する場合は最大3A。
*Rated current: 1.5A at maximum in conformity with UL standards, 3A atmaximum in conformity with IEC/DIN standards.
圧接タイプについては、営業にお問い合わせください。For IDC type details, please consult the sales representative.
b列 Row ba列 Row a
b列 Row ba列 Row a
4
SERIES 8272ハンダ付 DIN-Qタイププラグ2列ストレート
Soldering DIN-Q typeVertical type 2-row plug
00 +264 XXX XXX8272型番構成/Part number
注文コード/Ordering code
極数/Number of positions
テール形状/Tail shape
バリエーション/Variation
極数/ Number of positions
64
A
78.74
B
85.25
C
90.0
D
95.0
コードNo./Code No. テール形状/Tail shape004 504
標準/Standardキンク加工(E=3.9のみ)/Kinked (E=3.9 only)
メ ッ キ μm/Plating (μm)接触部/
Contacting areaポスト部/
Post area
0.1 金/Au
スズ銅/Sn-Cu
0.25 金/Au
スズ銅/Sn-Cu
0.5 金/Au
スズ銅/Sn-Cu
0.76 金/Au
スズ銅/Sn-Cu
312 412
322 422
332 432
342 442
3.9 13.0
テール長さ=E/Tail length=Eバリエーション コード/Variation code
推 奨 取 付 寸 法Recommended mounting dimensions
5
SERIES 8272ハンダ付/ワイヤーラッピング拡張DIN-Nタイプ プラグ2列ストレート
Soldering/Wire wrappingExtended DIN-N typeVertical type 2-row plug
00 2XX XXX XXX8272型番構成/Part number
注文コード/Ordering code
極数/Number of positions
テール形状/Tail shape
バリエーション/Variation
極数/ Number of positions
20 30 44 50 64 90 100*
A
22.86 35.56 53.34 60.96 78.74 111.76 124.46
B
29.37 42.07 59.85 67.47 85.25 118.27 130.97
C
38.10 50.80 68.58 76.20 93.98 127.00 139.70
D
43.30 56.00 73.78 81.40 99.18 132.20 144.90
コードNo./Code No. テール形状/Tail shape003 503
標準/Standardキンク加工(E=3.9のみ)/Kinked (E=3.9 only)
メ ッ キ μm/Plating (μm)接触部/
Contacting areaポスト部/
Post area
0.1 金/Au
スズ銅/Sn-Cu
0.25 金/Au
スズ銅/Sn-Cu
0.5 金/Au
スズ銅/Sn-Cu
0.76 金/Au
スズ銅/Sn-Cu
312 412
322 422
332 432
342 442
3.9(適用基板厚2.4以下/Applicable board thickness = 2.4 or less) 13.0
テール長さ=E/Tail length=Eバリエーション コード/Variation code
* 注文コードは00 * Ordering code is “00”
+
b列 Row ba列 Row a
b列 Row ba列 Row a
●拡張DIN-Nタイプとは当社がDIN規格41612に準拠して独自に開発した製品です。
●The extended DIN-N type is a type developed originally by us in conformity with DIN41612
推 奨 取 付 寸 法Recommended mounting dimensions
6
SERIES 8272ハンダ付 DIN-B/拡張DIN-Nタイププラグ2列ライトアングル
Soldering DIN-B/Extended DIN-N typeRight Angle type 2-row plug
00 2XX XXX XXX8272型番構成/Part number
注文コード(適用基板厚1.6mm)/Ordering code (Applicable board thickness 1.6mm)
極数/Number of positions
テール形状/Tail shape
バリエーション/Variation
極数/ Number of positions
20 30 32 44 50 64 90 100*
A
22.86 35.56 38.10 53.34 60.96 78.74 111.76 124.46
B
29.37 42.07 44.61 59.85 67.47 85.25 118.27 130.97
C
33.02 45.72 48.26 63.50 71.12 88.90 121.92 134.62
D
38.02 50.72 53.26 68.50 76.12 93.90 126.92 139.62
備考/Remarks
拡張DIN-Nタイプ/Extended DIN-N type拡張DIN-Nタイプ/Extended DIN-N type拡張DIN-Nタイプ/Extended DIN-N type拡張DIN-Nタイプ/Extended DIN-N type拡張DIN-Nタイプ/Extended DIN-N typeDIN-B/拡張DIN-Nタイプ/DIN-B/Extended DIN-N type拡張DIN-Nタイプ/Extended DIN-N type拡張DIN-Nタイプ/Extended DIN-N type
DIN-Bタイプ/DIN-B type 形状/Shape
000 500
拡張DIN-Nタイプ/ExtendedDIN-N type001 501
標準/Standardワンタッチロック/One-touch locking
メ ッ キ μm/Plating (μm)接触部/
Contacting areaポスト部/
Post area
0.1 金/Au
スズ銅/Sn-Cu
0.25 金/Au
スズ銅/Sn-Cu
0.5 金/Au
スズ銅/Sn-Cu
0.76 金/Au
スズ銅/Sn-Cu
112 122 132 142
バリエーション コード/Variation code
コードNo./Code No.
* 注文コードは00 * Ordering code is “00”
+
推 奨 取 付 寸 法Recommended mounting dimensions
●拡張DIN-Nタイプとは当社がDIN規格41612に準拠して独自に開発した製品です。
●The extended DIN-N type is a type developed originally by us in conformity with DIN41612
ネジ取付位置Screw position
NタイプType N
嵌合深さMating depth
b列
Row
ba列
Row
a
ネジ取付位置Screw position
BタイプType B
嵌合深さMating depth
b列
Row
ba列
Row
a
b列 Row ba列 Row a
7
SERIES 8345ハンダ付DIN-B/拡張DIN-Nタイプ リセプタクル2列ストレート
SolderingDIN-B/Extended DIN-N typeVertical type 2-row receptacle
00 2XX 9XX 0XX8345型番構成/Part number
注文コード/Ordering code
極数/Number of positions
テール形状/Tail shape
バリエーション/Variation
極数/ Number of positions
20 30 32 44 50 64 90 100*
A
22.86 35.56 38.1 53.34 60.96 78.74 111.76 124.46
B
29.12 41.82 44.36 59.6 67.22 85.0 118.02 130.72
C
34.12 46.82 49.36 64.6 72.22 90.0 123.02 135.72
D
39.12 51.82 54.36 69.6 77.22 95.0 128.02 140.72
備考/Remarks
拡張DIN-Nタイプ/Extended DIN-N type拡張DIN-Nタイプ/Extended DIN-N type拡張DIN-Nタイプ/Extended DIN-N type拡張DIN-Nタイプ/Extended DIN-N type拡張DIN-Nタイプ/Extended DIN-N typeDIN-Bタイプ/DIN-B type拡張DIN-Nタイプ/Extended DIN-N type拡張DIN-Nタイプ/Extended DIN-N type
コードNo./Code No. テール長さ=E/Tail length=E
949 950
テール形状/Tail shape
標準/Standard キンク加工/Kinked
2.9 2.9(適用基板厚1.6/Applicable board thickness 1.6)
メ ッ キ μm/Plating (μm)接触部/
Contacting areaポスト部/
Post area
0.1 金/Au
スズ銅/Sn-Cu
0.25 金/Au
スズ銅/Sn-Cu
0.5 金/Au
スズ銅/Sn-Cu
0.76 金/Au
スズ銅/Sn-Cu
012 022 032 042
バリエーション コード/Variation code
* 注文コードは00 * Ordering code is “00”
+
推 奨 取 付 寸 法Recommended mounting dimensions
ネジ取付位置
Scr
ew p
ositi
on
b列 Row ba列 Row a
b列
Row
ba列
Row
a
●拡張DIN-Nタイプとは当社がDIN規格41612に準拠して独自に開発した製品です。
●The extended DIN-N type is a type developed originally by us in conformity with DIN41612
ネジ取付位置
Scr
ew p
ositi
on
b列 Row ba列 Row a
b列 Row ba列 Row a
8
SERIES 8345ハンダ付 DIN-Qタイプリセプタクル2列ライトアングル
Soldering DIN-Q typeRight Angle type 2-row receptacle
00 264 XXX 0XX8345型番構成/Part number
注文コード(適用基板厚1.6mm)/Ordering code (Applicable board thickness 1.6mm)
極数/Number of positions
テール形状/Tail shape
バリエーション/Variationメ ッ キ μm/Plating (μm)
接触部/ Contacting areaポスト部/
Post area
0.1 金/Au
スズ銅/Sn-Cu
0.25 金/Au
スズ銅/Sn-Cu
0.5 金/Au
スズ銅/Sn-Cu
0.76 金/Au
スズ銅/Sn-Cu
012 022 032 042
バリエーション コード/Variation code
極数/ Number of positions
64
A
78.74
B
85.0
C
88.9
D
94.0
コードNo./Code No. テール形状/Tail shape969 970
標準/Standardワンタッチロック/One-touch lock
+
推 奨 取 付 寸 法Recommended mounting dimensions
ネジ取付位置
Scr
ew p
ositi
on
(嵌合深さ)(Mating depth)
b列 Row ba列 Row a
b列
Row
ba列
Row
a
9
SERIES 8345ハンダ付 拡張DIN-Nタイプリセプタクル2列ライトアングル
Soldering Extended DIN-N typeRight Angle type 2-row receptacle
00 2XX XXX 0XX8345型番構成/Part number
注文コード(適用基板厚1.6mm)/Ordering code (Applicable board thickness 1.6mm)
極数/Number of positions
テール形状/Tail shape
バリエーション/Variation
極数/ Number of positions
20 30 44 50 64 90 100*
A
22.86 35.56 53.34 60.96 78.74 111.76 124.46
B
29.02 41.72 59.50 67.12 84.90 117.92 130.62
C
38.10 50.80 68.58 76.20 93.98 127.00 139.70
D
43.10 55.80 73.58 81.20 98.98 132.00 144.70
* 注文コードは00 * Ordering code is “00”
コードNo./Code No. テール形状/Tail shape989 990
標準/Standardワンタッチロック/One-touch lock
メ ッ キ μm/Plating (μm)接触部/
Contacting areaポスト部/
Post area
0.1 金/Au
スズ銅/Sn-Cu
0.25 金/Au
スズ銅/Sn-Cu
0.5 金/Au
スズ銅/Sn-Cu
0.76 金/Au
スズ銅/Sn-Cu
012 022 032 042
バリエーション コード/Variation code
+
推 奨 取 付 寸 法Recommended mounting dimensions
●拡張DIN-Nタイプとは当社がDIN規格41612に準拠して独自に開発した製品です。
●The extended DIN-N type is a type developed originally by us in conformity with DIN41612
b列 Row bc列 Row c
a列 Row a
b列 Row bc列 Row c
a列 Row a
10
SERIES 8272ハンダ付 DIN-Rタイププラグ3列ストレート
Soldering DIN-R typeVertical type 3-row plug
00 3XX XXX XXX8272型番構成/Part number
注文コード/Ordering code
極数/Number of positions
テール形状/Tail shape
バリエーション/Variation
極数/ Number of positions
64 96
A
78.74 78.74
B
85.25 85.25
C
90.0 90.0
D
95.0 95.0
備考/Remarks
a、c列実装/Row a and c are filled
コードNo./Code No. テール形状/Tail shape004 504
標準/Standardキンク加工(E=3.9のみ)/Kinked (E=3.9 only)
メ ッ キ μm/Plating (μm)接触部/
Contacting areaポスト部/
Post area
0.1 金/Au
スズ銅/Sn-Cu
0.25 金/Au
スズ銅/Sn-Cu
0.5 金/Au
スズ銅/Sn-Cu
0.76 金/Au
スズ銅/Sn-Cu
313 316 413 416
323 326 423 426
333 336 433 436
343 346 443 446
3.9(適用基板厚2.4以下/Applicable board thickness = 2.4 or less) 3.9(適用基板厚2.4以下/Applicable board thickness = 2.4 or less) 13.0 13.0
全列実装/All rows are filled a+c列実装/Row a and c are filled 全列実装/All rows are filled a+c列実装/Row a and c are filled
テール長さ=E/Tail length=E コンタクト実装/Mounting contactsバリエーション コード/Variation code
+
推 奨 取 付 寸 法Recommended mounting dimensions
b列 Row bc列 Row c
a列 Row a
b列 Row bc列 Row c
a列 Row a
11
SERIES 8272ハンダ付/ワイヤーラッピング拡張DIN-Nタイプ プラグ3列ストレート
Soldering/Wire wrappingExtended DIN-N type Vertical 3-row plug
00 3XX 003 XXX8272型番構成/Part number
注文コード/Ordering code
極数/Number of positions
バリエーション/Variation
極数/ Number of positions
32 48 64 96
A
38.10 38.10 78.74 78.74
B
44.61 44.61 85.25 85.25
C
53.34 53.34 93.98 93.98
D
58.54 58.54 99.18 99.18
備考/Remarks
a、c列実装/Row a and c are filled
a、c列実装/Row a and c are filled
メ ッ キ μm/Plating (μm)接触部/
Contacting areaポスト部/
Post area
0.1 金/Au
スズ銅/Sn-Cu
0.25 金/Au
スズ銅/Sn-Cu
0.5 金/Au
スズ銅/Sn-Cu
0.76 金/Au
スズ銅/Sn-Cu
313 316 413 416
323 326 423 426
333 336 433 436
343 346 443 446
3.9(適用基板厚2.4以下/Applicable board thickness = 2.4 or less) 3.9(適用基板厚2.4以下/Applicable board thickness = 2.4 or less) 13.0 13.0
全列実装/All rows are filled a+c列実装/Row a and c are filled 全列実装/All rows are filled a+c列実装/Row a and c are filled
テール長さ=E/Tail length=E コンタクト実装/Mounting contactsバリエーション コード/Variation code
+
推 奨 取 付 寸 法Recommended mounting dimensions
●拡張DIN-Nタイプとは当社がDIN規格41612に準拠して独自に開発した製品です。
●The extended DIN-N type is a type developed originally by us in conformity with DIN41612
ネジ取付位置Screw position
嵌合深さMating depth
b列
Row
bc列
Row
c
a列
Row
a
a列 Row a
c列 Row cb列 Row b
12
SERIES 8272ハンダ付 DIN-Cタイププラグ3列ライトアングル
Soldering DIN-C typeRight Angle type 3-row plug
00 3XX XXX XXX8272型番構成/Part number
注文コード(適用基板厚1.6mm)/Ordering code (Applicable board thickness 1.6mm)
極数/Number of positions
テール形状/Tail shape
バリエーション/Variation
極数/ Number of positions
32 48 64 96
A
38.10 38.10 78.74 78.74
B
44.61 44.61 85.25 85.25
C
48.26 48.26 88.90 88.90
D
53.26 53.26 93.90 93.90
備考/Remarks
a、c列実装/Row a and c are filled
a、c列実装/Row a and c are filled
コードNo./Code No. テール形状/Tail shape000 500
標準/Standardワンタッチロック/One-touch lock
メ ッ キ μm/Plating (μm)接触部/
Contacting areaポスト部/
Post area
0.1 金/Au
スズ銅/Sn-Cu
0.25 金/Au
スズ銅/Sn-Cu
0.5 金/Au
スズ銅/Sn-Cu
0.76 金/Au
スズ銅/Sn-Cu
113 116
123 126
133 136
143 146
バリエーション コード/Variation code全列実装/All rows are filled a+c列実装/Row a and c are filled
コンタクト実装/Mounting contacts
+
推 奨 取 付 寸 法Recommended mounting dimensions
a列 Row a
c列 Row cb列 Row b
b列
Row
bc列
Row
c
a列
Row
a
ネジ取付位置
Scr
ew p
ositi
on
13
SERIES 8345ハンダ付/ワイヤーラッピングDIN-Cタイプ リセプタクル3列ストレート
Soldering/Wire-wrappingDIN-C Vertical type 3-row receptacle
00 3XX 900 0XX8345型番構成/Part number
注文コード/Ordering code
極数/Number of positions
テール形状/Tail shape
バリエーション/Variation
極数/Numberof positions
32
48
64
96
A
38.10
38.10
78.74
78.74
B
44.36
44.36
85.00
85.00
C
49.36
49.36
90.00
90.00
D
54.36
54.36
95.00
95.00
備考/Remarks
メ ッ キ μm/Plating (μm)接触部/
Contacting areaポスト部/
Post area
0.1 金/Au
スズ銅/Sn-Cu
0.25 金/Au
スズ銅/Sn-Cu
0.5 金/Au
スズ銅/Sn-Cu
0.76 金/Au
スズ銅/Sn-Cu
013 014
023 024
033 034
043 044
バリエーション コード/Variation code全列実装/All rows are filled a+c列実装/Row a and c are filled
コンタクト実装/Mounting contacts
コードNO./Code No. テール長さ=E/Tail length=E
900テール形状/Tail shape
標準/Standard 13.0
48極のa、c列実装、注文コードは48/Pins are inserted into rows a and c of the insulator for 48-positions connector Ordering code is 48
96極のa、c列実装、注文コードは96/Pins are inserted into rows a and c of the insulator for 96-positions connector Ordering code is 96
+
推 奨 取 付 寸 法Recommended mounting dimensions
Row a a列
ネジ取付位置Screw position
(基板面)Base positionfor mounting
Row c c列Row b b列
a列 Row a
c列 Row cb列 Row b
a列 Row a
c列 Row cb列 Row b
14
SERIES 8272ハンダ付 DIN-Cタイププラグ3列ライトアングル
Soldering DIN-C typeRight Angle type 3-row plug
00 3XX 124 0XX8272型番構成/Part number
注文コード/Ordering code
極数/Number of positions
バリエーション/Variation
+
極数/Number of position32 48 64 96
A
38.10 38.10 78.74 78.74
B
44.61 44.61 85.25 85.25
C
(52.9) (52.9) (94.0) (94.0)
D
57.36 57.36 98.00 98.00
E
( 70.9) ( 70.9) (112.0) (112.0)
F
48.26 48.26 88.90 88.90
備考/Remarks
メ ッ キ μm/Plating (μm)接触部/
Contacting areaポスト部/
Post area
0.1 金/Au
スズ銅/Sn-Cu
0.25 金/Au
スズ銅/Sn-Cu
0.5 金/Au
スズ銅/Sn-Cu
0.76 金/Au
スズ銅/Sn-Cu
013 016
023 026
033 036
043 046
バリエーション コード/Variation code全列実装/All rows are filled a+c列実装/Row a and c are filled
コンタクト実装/Mounting contacts
48極のa、c列実装/Pins are inserted into rows a and c of the insulator for 48-positions connector
96極のa、c列実装/Pins are inserted into rows a and c of the insulator for 96-positions connector
推 奨 取 付 寸 法Recommended mounting dimensions
a列 Row ab列 Row b
a列 Row ab列 Row b
15
SERIES 8272プレスフィットDIN-Qタイプ プラグ2列
Press-fitDIN-Q type 2-row plug
07 264 004 XXX8272型番構成/Part number
注文コード/Ordering code
極数/Number of positions
バリエーション/Variation
+
極数/ Number of positions
64
A
78.74
B
85.25
C
90.0
D
95.0
メ ッ キ μm/Plating (μm)接触部/
Contacting areaポスト部/
Post area
0.1 金/Au
スズ銅/Sn-Cu
0.25 金/Au
スズ銅/Sn-Cu
0.5 金/Au
スズ銅/Sn-Cu
0.76 金/Au
スズ銅/Sn-Cu
212 412 512
222 422 522
232 432 532
242 442 542
1.6±0.15~3.2±0.2 1.6±0.15~3.2±0.2 1.6±0.15~3.2±0.2
3.5 13.0 16.0
適用基板厚/Applicable board thickness テール長さ=E/Tail length=Eバリエーション コード/Variation code
推 奨 取 付 寸 法Recommended mounting dimensions
スルーホール仕様については、P.3の「プレスフィットタイプ適用スルーホール」の項をご参照ください。
For specifications of through hole, please refer to “Applicable through hole” in the table of “Press-fitting type” on page 3.
a列 Row ab列 Row b
実装スペースMounting space
16
SERIES 8272プレスフィット拡張DIN-Nタイプ プラグ2列
Press-fitExtended DIN-N type 2-row plug
07 2XX 003 XXX8272型番構成/Part number
注文コード/Ordering code
極数/Number of positions
バリエーション/Variation
+
極数/ Number of positions
20 30 44 50 64 90 100*
A
22.86 35.56 53.34 60.96 78.74 111.76 124.46
B
29.37 42.07 59.85 67.47 85.25 118.27 130.97
C
38.10 50.80 68.58 76.20 93.98 127.00 139.70
D
43.30 56.00 73.78 81.40 99.18 132.20 144.90
メ ッ キ μm/Plating (μm)接触部/
Contacting areaポスト部/
Post area
0.1 金/Au
スズ銅/Sn-Cu
0.25 金/Au
スズ銅/Sn-Cu
0.5 金/Au
スズ銅/Sn-Cu
0.76 金/Au
スズ銅/Sn-Cu
412 912
422 922
432 932
442 942
1.6±0.15~3.2±0.2 2.4±0.2 ~3.2±0.2
13.0 16.0
適用基板厚/Applicable board thickness テール長さ=E/Tail length=Eバリエーション コード/Variation code
* 注文コードは00 * Ordering code is “00”
推 奨 取 付 寸 法Recommended mounting dimensions
●拡張DIN-Nタイプとは当社がDIN規格41612に準拠して独自に開発した製品です。
●The extended DIN-N type is a type developed originally by us in conformity with DIN41612
スルーホール仕様については、P.3の「プレスフィットタイプ適用スルーホール」の項をご参照ください。
For specifications of through hole, please refer to “Applicable through hole” in the table of “Press-fitting type” on page 3.
a列 Row ab列 Row b
a列
Row
ab列
Row
b
Scr
ew p
ositi
on
17
SERIES 8345プレスフィットDIN-B/拡張DIN-Nタイプ リセプタクル2列
Press-fitDIN-B/Extended DIN-N type 2-row receptace
07 2XX 80X 0XX8345型番構成/Part number
注文コード/Ordering code
極数/Number of positions
適用基板厚/テール形状/Applidable board thickness/Tail shape
バリエーション/Variation
+
極数/ Number of positions
64 90 100*
A
78.74 111.76 124.46
B
85.0 118.02 130.72
C
90.0 123.02 135.72
D
95.0 128.02 140.72
備考/Remarks
DIN-Bタイプ/DIN-B type拡張DIN-Nタイプ/Extended DIN-N type拡張DIN-Nタイプ/Extended DIN-N type
コードNo./Code No. テール長さ=E/Tail length=E
804 806
13.0 3.5
メ ッ キ μm/Plating (μm)接触部/
Contacting areaポスト部/
Post area
0.1 金/Au
スズ銅/Sn-Cu
0.25 金/Au
スズ銅/Sn-Cu
0.5 金/Au
スズ銅/Sn-Cu
0.76 金/Au
スズ銅/Sn-Cu
0.25 金/Au0.25 金/Au
012 022 032 042 062* バリエーション コード/Variation code
* E=13mmのみ適用 * Applicable only for E=13mm
1.6±0.15~3.2±0.2 1.6±0.15~3.2±0.2
適用基板厚/Applicable board thickness
* 注文コードは00 * Ordering code is “00”
推 奨 取 付 寸 法Recommended mounting dimensions
フランジなしも用意しています。
No flange type is also available.
●拡張DIN-Nタイプとは当社がDIN規格41612に準拠して独自に開発した製品です。
●The extended DIN-N type is a type developed originally by us in conformity with DIN41612
スルーホール仕様については、P.3の「プレスフィットタイプ適用スルーホール」の項をご参照ください。
For specifications of through hole, please refer to “Applicable through hole” in the table of “Press-fitting type” on page 3.
a列 Row ab列 Row bc列 Row c
a列 Row ab列 Row bc列 Row c
18
SERIES 8272プレスフィットDIN-Rタイプ プラグ3列
Press-fitDIN-R type 3-row plug
07 3XX 004 XXX8272型番構成/Part number
注文コード/Ordering code
極数/Number of positions
バリエーション/Variation
+
極数/ Number of positions
64 96
A
78.74 78.74
B
85.25 85.25
C
90.0 90.0
D
95.0 95.0
備考/Remarks
a、c列実装/Row a and c are filled
メ ッ キ μm/Plating (μm)接触部/
Contacting areaポスト部/
Post area
0.1 金/Au
スズ銅/Sn-Cu
0.25 金/Au
スズ銅/Sn-Cu
0.5 金/Au
スズ銅/Sn-Cu
0.76 金/Au
スズ銅/Sn-Cu
213 216 413 416 513 516
223 226 423 426 523 526
233 236 433 436 533 536
243 246 443 446 543 546
全列実装/All rows are filled a+c列実装/Row a and c are filled 全列実装/All rows are filled a+c列実装/Row a and c are filled全列実装/All rows are filled a+c列実装/Row a and c are filled
コンタクト実装/Mounting contactsバリエーション コード/Variation code1.6±0.15~3.2±0.2 1.6±0.15~3.2±0.2 1.6±0.15~3.2±0.2 1.6±0.15~3.2±0.2 1.6±0.15~3.2±0.2 1.6±0.15~3.2±0.2
3.5 3.5 13.0 13.0 16.0 16.0
適用基板厚/Applicable board thickness テール長さ=E/Tail length=E
推 奨 取 付 寸 法Recommended mounting dimensions
スルーホール仕様については、P.3の「プレスフィットタイプ適用スルーホール」の項をご参照ください。
For specifications of through hole, please refer to “Applicable through hole” in the table of “Press-fitting type” on page 3.
a列 Row ab列 Row bc列 Row c
a列 Row ab列 Row bc列 Row c
19
SERIES 8272プレスフィット拡張DIN-Nタイプ プラグ3列
Press-fitExtended DIN-N type 3-row plug
07 3XX 003 XXX8272型番構成/Part number
注文コード/Ordering code
極数/Number of positions
バリエーション/Variation
+
極数/ Number of positions
32 48 64 96
A
38.10 38.10 78.74 78.74
B
44.61 44.61 85.25 85.25
C
53.34 53.34 93.98 93.98
D
58.54 58.54 99.18 99.18
備考/Remarks
a、c列実装/Row a and c are filled
a、c列実装/Row a and c are filled
メ ッ キ μm/Plating (μm)接触部/
Contacting areaポスト部/
Post area
0.1 金/Au
スズ銅/Sn-Cu
0.25 金/Au
スズ銅/Sn-Cu
0.5 金/Au
スズ銅/Sn-Cu
0.76 金/Au
スズ銅/Sn-Cu
413 416 913 916
423 426 923 926
433 436 933 936
443 446 943 946
全列実装/All rows are filled a+c列実装/Row a and c are filled全列実装/All rows are filled a+c列実装/Row a and c are filled
コンタクト実装/Mounting contactsバリエーション コード/Variation code1.6±0.15~3.2±0.2 1.6±0.15~3.2±0.2 2.4±0.2 ~3.2±0.2 2.4±0.2 ~3.2±0.2
13.0 13.0 16.0 16.0
適用基板厚/Applicable board thickness テール長さ=E/Tail length=E
推 奨 取 付 寸 法Recommended mounting dimensions
●拡張DIN-Nタイプとは当社がDIN規格41612に準拠して独自に開発した製品です。
●The extended DIN-N type is a type developed originally by us in conformity with DIN41612
スルーホール仕様については、P.3の「プレスフィットタイプ適用スルーホール」の項をご参照ください。
For specifications of through hole, please refer to “Applicable through hole” in the table of “Press-fitting type” on page 3.
a列 Row ab列 Row bc列 Row c
a列
Row
ab列
Row
bc列
Row
c
ネジ取付位置
Scr
ew p
ositi
on
20
SERIES 8345プレスフィットDIN-Cタイプ リセプタクル3列
Press-fitDIN-C type 3-row receptacle
07 3XX 80X 0XX8345
極数/Number of positions
+型番構成/Part number
注文コード/Ordering code
極数/Numberof positions
32
48
64
96
A
38.10
38.10
78.74
78.74
B
44.36
44.36
85.00
85.00
C
49.36
49.36
90.00
90.00
D
54.36
54.36
95.00
95.00
備考/Remarks
48極のa、c列実装、注文コードは48/Pins are inserted into rows a and c of the insulator for 48-positions connector Ordering code is 48
96極のa、c列実装、注文コードは96/Pins are inserted into rows a and c of the insulator for 96-positions connector Ordering code is 96
適用基板厚/テール形状/Applidable board thickness/Tail shapeコードNO./Code No.
804 806
1.6±0.15~3.2±0.21.6±0.15~3.2±0.2
適用基板厚/Applicable board thickness
バリエーション/Variation
* E=13mmのみ適用* Applicable only for E=13mm
メ ッ キ μm/Plating (μm)接触部/
Contacting areaポスト部/
Post area
0.1金/Au
スズ銅/Sn-Cu
0.25金/Au
スズ銅/Sn-Cu
0.5金/Au
スズ銅/Sn-Cu
0.76金/Au
スズ銅/Sn-Cu
0.25金/Au0.25金/Au
013 014
023 024
033 034
043 044
063*
064*
バリエーション コード/Variation code全列実装/All rows are filleda+c列実装/Row a and c are filled
コンタクト実装/Mounting contacts
テール長さ=E/Tail length=E
13.0 3.5
推 奨 取 付 寸 法Recommended mounting dimensions
フランジなしも用意しています。
No flange type is also available.
スルーホール仕様については、P.3の「プレスフィットタイプ適用スルーホール」の項をご参照ください。
For specifications of through hole, please refer to “Applicable through hole” in the table of “Press-fitting type” on page 3.
0X 3XX 1XX 0XX8272型番構成/Part number
注文コード/Ordering code エジェクターなしタイプもあります。/Connector with no ejector are also available.
極数/Number of positions
適用基板厚/テール形状/Applidable board thickness/Tail shape
テール形状/Tail shape
バリエーション/Variation
コードNo./Code No. テール長さ=E/Tail length=E
120 123 124 130 131 132
タイプ/Type
ハンダ付/Solderingラッピング/Wrappingライトアングル/Right Angleプレスフィット/Press-fitプレスフィット/Press-fitプレスフィット/Press-fit
3.9 13.0 2.9 3.5 13.0 16.0
メ ッ キ μm/Plating (μm)接触部/
Contacting areaポスト部/
Post area
0.1 金/Au
スズ銅/Sn-Cu
0.25 金/Au
スズ銅/Sn-Cu
0.5 金/Au
スズ銅/Sn-Cu
0.76 金/Au
スズ銅/Sn-Cu
0.25 金/Au0.25 金/Au
013 023 033 043 093* バリエーション コード/Variation code
* プレスフィットのE=13.0mmまたは16.0mmのみ適用 * Applicable to Press-fit type E=13.0 or 16.0mm only
1.6±0.2~3.2±0.2
1.6±0.2 1.6±0.15~3.2±0.2 1.6±0.15~3.2±0.2 1.6±0.15~3.2±0.2
適用基板厚/Applicable board thickness
コードNo./Code No.
00 07
ハンダ付/Solderingプレスフィット/Press-fit
タイプ/Type
極数/ Number of positions
48 96
A
38.10 78.74
B
44.61 85.25
C
(52.9) (94.0)
D
57.36 98.0
F
( 70.9) (112.0)
+
ストレートVertical
ストレートVertical
ライトアングルRight Angle
ライトアングルRight Angle
プレスフィットタイプPress-fit type
ハンダ付タイプライトアングルSoldering type,Right Angle
ハンダ付タイプストレートSoldering type,Vertical
21
SERIES 8272ハンダ付/プレスフィットエジェクター付 プラグ3列
Soldering/Press-fit3-row plug with a ejector
推 奨 取 付 寸 法Recommended mounting dimensions
スルーホール仕様については、P.3の「プレスフィットタイプ適用スルーホール」の項をご参照ください。
For specifications of through hole, please refer to“Applicable through hole” in the table of “Press-fittingtype” on page 3.
22
SERIES 8272エジェクター付プラグウエハー3列
Wafer type 3-row plugwith an ejector
30 3XX 46X 0038272型番構成/Part number
注文コード/Ordering code エジェクターなしタイプもあります。/Connector with no ejector are also available.
極数/Number of positions
バリエーション/VariationコードNo./Code No.
466 467 468
L1
11.4 12.1 12.9
L2
24.4 25.1 25.9
3.2±0.2 2.4±0.2 1.6±0.15
適用基板厚/Applicable board thickness
極数/ Number of positions
48 96
A
38.10 78.74
B
44.61 85.25
C
47.76 88.40
D
57.36 98.00
E F
53.06 93.70
70.86 111.50
注:48Pのみ適用CAVITY詳細/Note:Details of cavity applicable only for 48-positions connector
23
SERIES 8455圧着タイプリセプタクルインシュレータ2列
Crimping type 2-rowreceptacle insulator
60 2XX 400 0008455型番構成/Part number
インシュレータ注文コード/Ordering code for insulators
極数/Number of positions極数/
Number of positions20 64
A
22.86 78.74
B
29.02 84.90
SERIES 8455圧着Bタイプ リセプタクルインシュレータ2列スタンダードフランジ付
Crimping type B 2-rowreceptacle insulator with the standard flange
60 2XX 410 0008455型番構成/Part number
インシュレータ注文コード/Ordering code for insulators
極数/Number of positions極数/
Number of positions64
A
78.74
B
84.90
C
90.00
D
94.90
E
81.40
SERIES 8455圧着タイプ リセプタクルインシュレータ2列特殊フランジ付
Crimping type 2-rowreceptacle insulator with a special flange
60 2XX 420 0008455型番構成/Part number
インシュレータ注文コード/Ordering code for insulators
極数/Number of positions極数/
Number of positions20
A
22.86
B
29.02
C
34.12
D
39.02
推奨取付寸法Recommended
mountingdimensions
パネル取付図Mounted on
the panel
24
SERIES 8455圧着タイプリセプタクルインシュレータ3列
Crimping type 3-rowreceptacle insulator
60 3XX 400 0008455型番構成/Part number
インシュレータ注文コード/Ordering code for insulators
極数/Number of positions極数/
Number of positions48 96
A
38.10 78.74
B
44.26 84.90
SERIES 8455圧着Cタイプ リセプタクルインシュレータ3列スタンダードフランジ付
Crimping type C 3-rowreceptacle insulator with the standard flange
60 3XX 410 0008455型番構成/Part number
インシュレータ注文コード/Ordering code for insulators
極数/Number of positions極数/
Number of positions48 96
A
38.10 78.74
B
44.26 84.90
C
54.26 94.90
D
49.36 90.00
E
40.66 81.30
コンタクト/Contact
60 XX 8618455 0310型番構成/Part number
コンタクト注文コード/Ordering code for contacts
コンタクト形状/Contact shape
メッキ/Plating type
コードNo./Code No. コンタクト形状/Contact shape00 99
バラコンタクト/Contacts looseリールコンタクト(10,000/1リール)/Reeled contacts (10,000 contacts per reel)
861: 接触部金メッキ0.25μm以上、他はスズ銅メッキ : 0.25mm or thicker of Au plated for the contacting area, Sn-Cu plated for other area.
+
26
アプリケーション Application
2列 2-row 3列 3-row
2列 2-row
3列 3-row
Plug B typeBタイププラグ
Plug Q typeQタイププラグ
Receptacle Q typeQタイプリセプタクル
Plug C typeCタイププラグ
Receptacle C typeCタイプリセプタクル
Plug R typeRタイププラグ
Receptacle R typeRタイプリセプタクル
64 positionsonly64極のみ
64 positionsonly64極のみ
Plug N typeNタイププラグ
Receptacle N typeNタイプリセプタクル
Plug Q typeQタイププラグ
Receptacle B typeBタイプリセプタクル
Plug B typeBタイププラグ
Receptacle Q typeQタイプリセプタクル
Plug N typeNタイププラグ
Receptacle N typeNタイプリセプタクル
Plug N typeNタイププラグ
Receptacle N typeNタイプリセプタクル
Plug Q typeQタイププラグ
Receptacle N typeNタイプリセプタクル
Plug R typeRタイププラグ
Receptacle C typeCタイプリセプタクル
Plug N typeNタイププラグ
Receptacle C typeCタイプリセプタクル
Plug C typeCタイププラグ
Receptacle R typeRタイプリセプタクル
64 positions only64極のみ
Receptacle B typeBタイプリセプタクル
Plug N typeNタイププラグ
Receptacle R typeRタイプリセプタクル