Deflector-plate nozzles Series 571 - Lechler USA · Steel deck Flange 10 20 95.5 APP. 3 1 3/4 BSPT...
Transcript of Deflector-plate nozzles Series 571 - Lechler USA · Steel deck Flange 10 20 95.5 APP. 3 1 3/4 BSPT...
Steel deck Flange
10
20
95.5APP. 3
1 3/4 BSPT
Ø 219
Gasket 095.001.72.00.05.7Material: EWP 210
Deflector-plate nozzle 571.059.33.24.00.0
Countersunk screw ordering no.:6 ea.
095.012.1C.00.35.0M10 x 35 DIN 963Material: 1.4301
Countersunk screw ordering no.:6 ea.
095.011.1C.00.14.0M10 DIN 985Material: 1.4301
Nozzle ordering no.:
Ø 38
Ø 30
571.XXX.33.24
Brazed conical nipple ordering no.:
095.016.3F.01.30.0A38 DIN 86148Material: 2.0872
Brazed conical nipple ordering no.:
095.016.3F.04.10.0A30 DIN 86148Material: 2.0872
Union nut Hex 60 ordering no.:
095.011.3E.00.12.0Material: 2.0966
Design recommendationsSpray water quantity: Approx. 0.3 m3/h (5 l/min) is calculated per tonne dis-placement. According to the construction specifications of the German Armed Forces for naval ships, 0.24 m3/h (4 l/min) is required per m2 of deck area.
However, it was possible to prove in tests that 2.5–3.0 l/min is sufficient for coverage of the deck surfaces due to the low spray losses of the Lechler nozzles used when com-bined.
Spray circle diameter at 8 bar (according to BWB) Type 571.059: approx. 6 m Type 571.179: approx. 7 m
Spray angle
Ordering no. EØ
[mm]
V̇
Type p [bar] l/min
p [bar] m3/h
5 6 7 8 9 5 6 7 8 9
180° 571.059 2.0 66.7 71.7 78.3 83.3 88.3 4.0 4.3 4.7 5.0 5.3571.179 2.7 131.7 145.0 155.0 166.7 176.7 7.9 8.7 9.3 10.0 10.6
Applications:Cleaning deck surfaces in the event of NBC contamination.
�� Uniform, flat and coarse-droplet spray circle�� Low wind susceptibility, large-area fluid impact�� Recessed installation
Other housing versions possi-ble on request.
Standard material: Lock nuts = 316Ti SS · Spring: 1.4300 · All other components: 2.0920 (aluminum bronze)Flange not included in the scope of delivery. Available on request.
NATO/BW number available on request.
Spray diameter
Deflector-plate nozzles Series 571
Pressure
bar
Type
571.059.33.24Ø [m]
571.179.33.24Ø [m]
5 7.0 7.36 7.6 7.37 6.5 7.08 6.5 7.09 6.5 7.0
Other connection flanges and mounting types on request.
* 6-Hole
Ø 61 3 threadsØ 68
M4
80
34
Ø 55
255
11
Ø 120Ø 95 *
Ø 42.5
Ø 12.5
Material:1.4310
Material:1.4571
Material: NBRMaterial: 1.4301Material: EWP 210Material: 1.057098
22
20Ø 75
Ø 138Ø 6.2
Deflector-plate nozzle: 571.059.33.52.10.0
1 3/4 BSPTØ 46
24° 30'
M10
M4
Ø105 Ø78
Ø48
Spray angle
Ordering no. EØ
[mm]
V̇
Type p [bar] l/min
p [bar] m3/h
5 6 7 8 9 5 6 7 8 9
180° 571.059.33.52 2.0 66.7 71.7 78.3 83.3 88.3 4.0 4.3 4.7 5.0 5.3571.179.33.52 2.7 131.7 145.0 155.0 166.7 176.7 7.9 8.7 9.3 10.0 10.6500.289.33.00 2.0 66.7 71.7 78.3 83.3 88.3 4.0 4.3 4.7 5.0 5.3
Standard material: Lock nuts = 316Ti SS · Spring: 301 SS · All other components: AlBz8 (aluminum bronze)
Deflector-plate nozzlesSeries 571/500.289
Applications: Cleaning deck surfaces in the event of NBC contamination.
�� Series 571 Modular-design deflector- plate nozzle where the nozzle is guided. This allows simple mounting/disassembly, e. g. for cleaning purposes or in areas with high mechanical loads (e. g. in the area of the guns).
�� Series 500.289 Deflector-plate nozzle for mounting using stud bolts and clamp couplings (e. g. Straub Grip-L) from the inside of the ship.
�� Recessed installation
Housing flange
Mounting screws
Nozzle
Gasket
Weld-in flange