SATHEESH KUMAR

Mobile Number: +994 513209951 +91 9744360193

Email Address: satheesh10361@gmail.com satheesh1036@rediffmail.com

Objective

To build a career that offer challenge and growth with opportunities to enrich my knowledge and skills while contributing my best to the organization I work for.

Work Experience

May, 2015 till to date with Weatherford International, Baku, Azerbaijan.

RESPONSIBILITIES Supervise day to day inspection of casing/tubing/BP well control crossover/shoe tracks/landing joints/kill

assembly/conductor in Pipe inspection Facility at BP New base. Monitor quality of work, verify QC reports and provide BP casing make up instruction to inspectors with

drawing and review company procedures and quality manuals. Ensure all equipment’s meet the specification requirements

Responsible for maintain contract requirement and dealing with customer enquiries concerning inspection data, documentation.

Coordinate job related correspondence with customer representative and send daily reports to BP. Coordinate operational activities with QA/QC manger. Review inspection personnel qualification and training requirements. Planning ahead to meet monthly targets/revenue, analyzing and corrective action implementation.

QHSE PARTICIPATION Perform duties of Area Authority. Perform regular risk assessments acting as Risk Assessment Team Leader and communicate the results

to Management and workforce. Perform leadership in implementation of the HSE policies and ensure all working conditions are in

compliance with OH&S guidelines. Close participation at periodic HSE meetings to communicate effective HSE measures and strategies

applicable in the specific work industry. Control of PTW System and periodic check and audits of the system. Issue of daily Work Permits and TBTs, conduct TBT and sign COW packages as Area Authority. Daily PTW Meeting with Site Authorities on planning and implementation of daily work activities. Periodic PTW Audit on the tasks conducted at BP Supply Base Facility. Participation with HSE Team during Site HSE Inspections and Hazard Hunts, and implementation of

relative actions to increase safety and housekeeping standard at workplace in order to provide safe working place for workforce.

Close participation during incident investigations, Root Cause Analysis and implementation of actions. Assisting HSE integrated management in development and implementation of safe and practical

operational strategies. Assisting Maintained a safe work place environment by providing PPE to employees and inspecting the

work conditions from time to time.

July, 2008 to May, 2015 Weatherford International, Baku, Azerbaijan.

RESPONSIBILITIES Work closely with operation supervisor to support QC system and provide training to level I personal. Supervise Well control tool inspection and reporting as per manufacturer/BP/API/DS 1 spec. Inspect BP owned Well control crossovers and update status into tool inventory, prepare material

manifest, coordinate material movement, work closely with BP completion tool engineers for tool preparation and transfer.

Verify MPI reports and send to client. Coordination and Inspection of third party BP service company (Cameron, Tam and GE Vetco) tools.

QHSE PARTICIPATION Perform as Permit to Work Authority and participate in PTW system management. Perform risk assessment, conduct TBT, and prepare Hot work permit accordingly. Work closely with HSE team on their site inspection and rectify the issues related to HSE.

August, 2006 to June, 2008 with EMM Caspian, Baku, Azerbaijan

Page 1 of 3

Inspection Supervisor

Senior Inspector

Inspection Engineer

RESPONSIBILITIES Coordinate and Inspect Schlumberger, Halliburton, Baker Oil Tools, Smith International & Weatherford

drilling/fishing/specialty tools as per customer/BP spec. Inspect Drill pipes to DS 1 CAT 5, BHA, rig parts, handling and various well control/crossover at BP

offshore rigs. UT wall thickness survey on various pressure line pipes and manifolds. Update inspection equipment inventory. Witness and verify pressure test charts. Participate in HSE meetings and distribute safety alerts to inspection crew.

June, 2005 to July, 2006 with SMITH International (DRILCO), Oman

RESPONSIBILITIES Work closely with Oman PDO land rigs to co-ordinate job and inspect OCTG tubular/rig parts, Drill Pipe

and BHA equipment at rig site. Maintain quality of inspection and strong safety culture during the job. Coordinate post machine shop inspection process at Drilco machine shop. Provide training for inspection trainees. Work closely with rig management and fulfil rig demands. Coordinate onshore journey plan with HSE team. Participate onshore TBT as team leader and supervise inspection activities.

November,1996 to April,1998 & July,2003 to May,2005 AL-Mansoori Specialized ENGG. (MSE). ABUDHABI, UAE

RESPONSIBILITIES Joined as a trainee inspector. Coordinate and inspect National Drilling Company tools including Drill pipe, BHA and rig parts at ADMA

offshore and ADCO onshore rigs. Inspection of Casing & Tubing at ADMA OPCO base. Coordinate and inspect Halliburton, Schlumberger, Sperry sun & Weatherford tools at their base. Prepare EMI and BHA equipment for onshore/offshore job.

April,1998 to July, 2003 AL-Mansoori Specialized ENGG (MSE). KUWAIT

RESPONSIBILITIES Coordinate and perform inspection on casing and tubing for Kuwait Oil Company, at their base. Work closely with Inspection supervisor and manage Santa-Fe/Hamad Al-Hamad onshore rig call out

inspection jobs and prepare inspection reports. Schedule all call out jobs in TBT and coordinate inspection crew/equipment for different rig demands.

Perform post machine shop inspection at SOS machine shop. Maintain inspection equipment inventory and place order.

PROFESSIONAL EXPERIENCE & TRAINING

FLUT A-scan Inspection for Landing string API RP-7G, API RP-5A5, API 5D, API SPEC-7, API SPEC for handling tools and DS1 Inspection

techniques. Trained and experienced in operating Fully Computerized Drill pipe Inspection Unit/Portable EMI units

and Black Light inspection unit. Experienced in Drill Pipes, Tubing &Casings, BHA, Rig Accessories, Completion Tools, and Fishing

Tools, Rig Parts, Well control subs & Handling Tool Inspections. Well control tool inspection & tool management/inventory control. BP CoW Area Authority Training. Safety Training in Fire Fighting, Offshore Survival, Breathing Apparatus & First Aid, Trained in Risk

Assessment & Safe start. Tenaris Hydril connection awareness training. Weatherford internal technical and HSE management E-learning training/certification. Varco MPI training certificate for Rig Handling tool inspection (Aberdeen, UK)

TECHNICAL EDUCATION

ASNT Level-II in Ultrasonic Inspection ASNT Level-II in Dye Penetrant Inspection ASNT Level-II in Magnetic Particle Inspection Diploma in Mechanical Engineering

ACADEMIC QUALIFICATIONS

Mahatma Gandhi University Kerala, India

Page 2 of 3

Lead Inspector

Inspector

Inspector & Coordinator

Passed Pre-Degree from Mahatma Gandhi University.LANGUAGES KNOWN:

English Hindi Malayalam Azerbaijani

Nationality : Indian Date of Birth : 14.05.1974 Marital Status : Married Gender : Male Passport No. : J 9527561

Page 3 of 3

PERSONAL: