1 of 9

__________________________________________________________________________________________________________

MUHAMMAD WASEEMM.Sc. Chemical EngineerSr . Inspect ion Engineer (BV)(Ce r t i f i e d Coa t i n g / Pa i n t i n g In spe c t o r )Iqama # 2298604006 (Transferable Iqama)

Cell # 00966-500502197 , 00966-567943556

Bureau Veritas (BV) , 6th Floor, Al- Raja Tower, Opposite SABB Bank, Dammam

Khobar Highway, Al-Khobar , Saudi Arabia.

E-mail Address: eengr.waseem@gmail.com, eengr.waseem@yahoo.com.eengr.waseem@hotmail.com.

Skype Address: eengr.waseem , Whats Up # 00966500502197

PROF I LE S r . I n s p e c t i o n E n g i n e e r S r . C o a t i n g / P a i n t i n g E n g i n e e r P i p i n g E n g i n e e r

W e l d i n g E n g i n e e r Q A / Q C E n g i n e e r P r o c e s s E n g i n e e r

A young, ambitious, hard working and having good command on Projects and Maintenance, with zeal topursue career in a progressive organization which aims at excelling in today’s corporate and professionalenvironment.__________________________________________________________________________________________________________

A R E A S O F EX P E R T I S E

TPI Mechanical Inspection TPI Coating/Painting Inspection Developing ITPs / QIPs WPS, PQR & WQT Piping & Structure Fabrication Piping & Structure Erection

Piping Isometrics, P & IDs Codes and Standards Application Test Packs, Dossier Preparation

Close out of NCRs Hydro testing, Pneumatic Testing Production Enhancement

P R O F E S S I O N A L D E V E L O P M E N T

Degree Master Of Engineering( Chemical Engineering)

Professional Certifications

Approvals

Bachelor Of Engineering( Chemical Engineering)

B GAS-C SWIP Painting Inspector Grade 2 from TWI , UK.(BG: 665424, CSWIP Certificate No. 108176, ExpiryDate:21-04-2021).

IOSH (TWI Middle East FZ LLC) OSHA 10/30 Hrs (Construction Industry Safety & Health

Standard ( 29 CFR 1926 )) NASP (Construction) NASP (Occupational Safety & Health) NASP (General Industry) NDT LEVEL II (ASNT) Visual Testing (VT) Dye Penetrant testing (DPT) Magnetic Particle Test (MPT) Radiographic Testing (RT) Ultrasonic Testing (UT) Eddy Current & TOFD RTFI

SADARA Chemical Complex Project approval as Non-Metallic approved Inspector at Brine & Chlorine Plants(CHEM 1) & All areas of Waste water treatment, ChemicalLaydown yard, SGU unit area etc in Asset Integrity Sectionunder Maintenance & Engineering (M& E) , SADARA CardID # 261903.

SADARA Project approval as Non-Metallic approved

(2001-2004)

2 of 9

P R O F E S S I O N A L EX P E R I E N C E A N D S I G N I F I C A N T AC H I E V E M E N T S

Total Years of Professional Experience= 12 Years & 01 MonthFebruary 2013 to Present Date

Inspector at Brine & Chlorine Plants (CHEM 1) & All areasof Waste water treatment, Chemical Laydown yard, SGUunit area etc in Asset Integrity Section underMaintenance & Engineering (M& E) , , SADARACommissioning Card ID # 261903.

Approved Inspector for inspections of CDG Goods / ISOTankers & General Purpose Containers at M/S: SOCC,Schlumberger, Halliburton, Baker Hughes, OHS , NPS ,Cresent Yard & Kanoo Chemical Terminal, Dammam,Saudi Arabia.

Saudi Electricity Company (SEC) approved Inspector forinspections of Electric Overhead Travelling Cranes forContractor SEPCO III of Al-Zulfi Project as NEW AL-ZULFI(#9064) 380/132/33 kV BSP, Riyadh, KSA for SaudiElectricity Company as end user at M/S: Eastern MorrisCranes Co. Ltd, Dammam, Saudi Arabia.

Trainings/Workshops 1 Week Extensive Training of ISO 14001:2004 at IQTM Department, PU,

Lahore, Pakistan. 1 Day Pressure Equipment Training Certificate of Completion from BUREAU

VERITAS, UK. 1 Day Non-Destructive Testing (NDT) on Welding Training Certificate of

Completion from BUREAU VERITAS, UK. 1 Day Shop Inspection-Induction Training Certificate of Completion from

BUREAU VERITAS, UK. 1 Day Shop Inspection Techniques Training Certificate of Completion from

BUREAU VERITAS, UK. 3 Days Extensive Training of Occupational Safety & Health at PCES

Department, PU, Lahore, Pakistan. 3 Days Extensive Training of Applied Process Control of PEC at ICET

Department, UET, Lahore, Pakistan. 2 Days Extensive Training of Total Productive Maintenance of PEC at ICET,

UET, Lahore, Pakistan. 1 Day Extensive Training of Hazardous Material Recognition &

Communication at PCES Department, PU, Lahore, Pakistan. 3 Months Software Training Of Web & Graphic Designing at Department of

Mathematics, PU, Lahore, Pakistan. 2 Weeks Software Trainings Of Auto CAD for Engineers at ICET, PU, Lahore,

Pakistan.Internship

Internship as Trainee Engineer in M/S; Ittehad Chemicals Mfg. Pvt. Ltd.Lahore, Pakistan.(July 2003 – August 2003).

Personnel Data:

Father Name: Abdul Majeed Kamil

Date of Birth: 05-05-1981Iqama # 2298604006 (Transferable Iqama)Passport # BD6858592 (Validity w.e.f 03 Dec 2014 -30 Nov 2024)CNIC # 36103-1635859-3PEC Registration # CHEM/5435IEP Registration # M-16893/LHR-5430ICheE Membership # A10048Marital Status: MarriedReligion: IslamNationality: PakistaniComputer Proficiency: AutoCAD for Engineers 2000, MS Word, Excel & Power Point, Pro E, Web & Graphic

Designing, Adobe Photo shop, Corel Draw, Flash ,Fortran 77,Animation, Scanning,Printing, Internet Surfing etc.

3 of 9

Sr. Inspection Engineer BUREAU VERITAS, Al-Khobar, Saudi Arabia, H/O: France.(Third Party Inspection Company)

Reported to Operations Manager As Sr. Inspection Engineer

TPI as Non-Metallic Inspector (FRP/GRP) at Chlorine & Brine Plants of Sadara Chemical ComplexProject during commissioning process regarding final hydro testing, box up of Tanks & vessels,boroscopy tests of Tanks & vessels, spark tests & line walks by performing inspections of RFI ondaily basis representing Sadara TPI for M/S: NSH Contractor.

TPI for witnessing hydrostatic pressure tests as per working & design pressure of Pipes, Test Plugs,X-Overs, Boom burners, stuffing box ,Check valves, Tees & Elbows at M/S: Schlumberger MiddleEast. Dhahran Base, KSA.

Witness hydrostatic testing of various pipes & equipments in oil rigs such as oil/gas manifold ,choke manifold, sand filters, separators, Slick lines, crossovers, elbows, valves, tanks, singlePhase multi chamber, De-sander & gas sample bottles at M/S: SGS Middle East Company ,Dammam, KSA.

TPI for witnessing hydrostatic pressure tests as per working & design pressure of PolymerizationReactors, Condensers, Cooler Blender, Colloidal Mixer Tanks at M/S: Synthomer Middle East,Dammam, KSA.

TPI for witnessing hydrostatic pressure tests as per working & design pressure of Pipes at M/S: Al-Estagamah Flexiflo Factory, Dammam, KSA.

TPI for witnessing hydrostatic pressure tests as per working & design pressure of FRP/GRP Pipes atM/S: Arabian Company for Water Pipe Industry Ltd (ACWA Pipe), Dammam, KSA.

Performance Inspection regarding Functional , pneumatic & hydrotesting of Boilers, Compressors &Heat Exchangers equipments at M/S: Expro, Dammam, KSA.

TPI for witnessing hydrostatic pressure tests as per working & design pressure of Single ManualHeavy Duty Wireline BOP & Hydraulic cable stuffing box with Stub ACME Box at M/S: NOV ASEPElmar, Dammam, KSA & M/S: Hunting Energy Services, Dammam, KSA.

TPI for witnessing hydrostatic pressure tests as per working & design pressure of Single ManualHeavy Duty Wireline BOP ,Light weight wire line lubricator section Quick union Top & Bottom,Hydraulic cable stuffing box with Stub ACME Box, Triple Hydraulic Compact Wireline BOP at M/S:Setcore Arabia Petroleum Services Co. Ltd, Dammam, KSA.

TPI for pipe coating fusion bonded epoxy of Spools & joints of Al Husam-Swer Liwa Project forAdwea for Client: Al Husam General Contracting at M/S: Al-Qahtani Pipes Coating Industries. LLC,Site 2, Dammam-Jubail Highway, KSA. Insuring environmental conditions (dew point, relativehumidity, metal temperature) as per procedure & inspection plan, Witness blotter test to insurecontamination free compressed air, Surface cleanliness grade & profile is achieved using testexpress-o-film & profile is free from slivers, laps, laminations, sharp edges, dust, dirt etc. Witnesschloride content test, Coating application & thickness achieved is as per procedure/manufacturerecommendation, performing visual inspection to insure even coverage, uniform appearance,colour, gloss of the coating applied & that coating is free of irregularities like sags, runs, blisters,fish eyes, bubbles, puckers, voids, wrinkles, breaks etc. Witness holiday detection test, DFT test,insuring identity of the coated items is maintained by stencils marking / tagging system, finaldocuments review and confirming all required documentation is completed properly, arrangedsystematically for any kind of verification & future reference. Witnessing laboratory testing suchas cathodic disbondment, indentation, impact test, peel strength, DSC, elongation, foaming &tensile test.

TPI for pipe coating three layer polyethylene & fusion bonded epoxy at M/S: Global TechniquesCo. Ltd , Jubail, KSA. Insuring environmental conditions (dew point, relative humidity, metaltemperature) as per procedure & inspection plan, Witness blotter test to insure contamination freecompressed air, Surface cleanliness grade & profile is achieved using testex press-o-film & profileis free from slivers, laps, laminations, sharp edges, dust, dirt etc. Witness chloride content test,Coating application & thickness achieved is as per procedure/manufacture recommendation,performing visual inspection to insure even coverage, uniform appearance, colour, gloss of thecoating applied & that coating is free of irregularities like sags, runs, blisters, fish eyes, bubbles,puckers, voids, wrinkles, breaks etc. Witness holiday detection test, DFT test, insuring identity ofthe coated items is maintained by stencils marking / tagging system, final documents review &confirming all required documentation is completed properly, arranged systematically for any kindof verification & future reference. Witnessing laboratory testing such as cathodic disbondment,indentation, impact test, peel strength, DSC, elongation, foaming and tensile test.

TPI for manufacture of spiral welded pipes for M/S: Group five pipe Saudi for ACC-POSCO-UAE atM/S: Welspun Middle East Pipes , LLC, Dammam, KSA for KAIA Project of Perma Pipes, UAE,witnessing welding procedure qualification & operator/welder qualification , review weldingprocedure specifications, visual inspection of hot rolled coils, reviewing MTC’s for hot rolled coils,

4 of 9

checking bevel angle, visual inspection of Internal/external welding , random witness of autoonline UT , manual UT , reviewing x-ray films , witness hydro testing , final visual & dimensionalinspection of pipes ,witnessing of mechanical testing such as impact test, tensile test, hardnesstest, macro examinations. Review NDT results, reviewing final documents & releasing pipes fordelivery as per API 5L, 45th edition.

TPI for manufacturing & coating of spiral welded pipes for project: CFE SAMALAYUCA-SASABE atM/S: Welspun Middle East Pipes & Coating LLC, Dammam, KSA, witnessing welding procedurequalification & operator/welder qualification , review welding procedure specifications, visualinspection of hot rolled coils, reviewing MTC’s for hot rolled coils, checking bevel angle, visualinspection of Internal/external welding , random witness of auto online UT , manual UT ,reviewing x-ray films , witness hydro testing , final visual & dimensional inspection of pipes,witnessing of mechanical testing such as impact test, tensile test, hardness test, macroexaminations. Review NDT results, reviewing final documents & releasing pipes for delivery as perAPI 5L, 45th edition. For Painting & Coating of pipes ,the witness blotter test to insurecontamination free compressed air, Surface cleanliness grade & profile is achieved using testexpress-o-film & profile is free from slivers, laps, laminations, sharp edges, dust, dirt etc. Witnesschloride content test, Coating application & thickness achieved is as per procedure/manufacturerecommendation, performing visual inspection to insure even coverage, uniform appearance,colour, gloss of the coating applied & that coating is free of irregularities like sags, runs, blisters,fish eyes, bubbles, puckers, voids, wrinkles, breaks etc. Witness holiday detection test, DFT test,insuring identity of the coated items is maintained by stencils marking / tagging system, finaldocuments review & confirming all required documentation is completed properly, arrangedsystematically for any kind of verification & future reference. Witnessing laboratory testing suchas cathodic disbondment, indentation, impact test, peel strength, DSC, elongation, foaming andtensile test.

TPI for visual ,dimensional Material Inspection & documents review of Ductile Iron Pipes at M/S:Sadip , Dammam, KSA.

TPI for visual, thickness, dimensional & witnessing hydrostatic pressure tests as per working &design pressure Inspection of GRP & FRP Pipes at M/S: Amiantit Fiber glass Co. Ltd. Dammam ,KSA , M/S: Future Pipe Industries Co. Ltd. Dammam , KSA & M/S: ACWA Pipe Industries Co. Ltd.Dammam , KSA.

As Expeditor for Vessels preparation at M/S: Zamil Steel Co. Ltd , Dammam, KSA. TPI for the Projects of SABIC/ARAMCO/SEC/NWC/NWCC at the Position of SERVICE ENGINEER

FLYGT PUMPS, GR PUMPS, MEGVEN VALUES at Location of ATC RIYADH. Functional tests, pressuretests , hydro tests , material description & mechanical tests witness & final documents review asper API 610/ANSI/ISO/NFPA.

Inspection of Tank Containers as Approved Inspector for CDG Goods/ISO Tankers: Description ofthe Supply : IMPORTED (1 X20) TANK CONTAINING LIQUID ARGON IN K-AIR, Aluminium, NitrogenTankers etc .TPI for visual , hydrostatic/Pneumatic tests, soap/leak tests, witness of calibrationcertificates for valves & PSVs ,thickness & dimensional ISO Tankers Inspection at M/S: SaudiOrganometallic Chemicals Company (SOCC) Ltd. Jubail, KSA, M/S: Air Liquide Company,Dammam, KSA & M/S: Schlumberger, Halliburton, Baker Hughes ,OHS, NPS & Cresent yard etcat Dammam & Udhailiyah Yard, KSA . Confirmation of data & CSC plates marking withmanufacturing & as-built documents , corrosion conditions monitoring at critical points, pressuretests, UT thickness tests, leak tests, pressure ,temperature gauges & safety relief valvescalibration certificates were witnessed. Pressure Vessel, Chemical Dangerous goods (CDG)containers, Genernal purpose containers, Storage Tank & Piping Inspections & constructionsupervisions as per API & other international standards.

TPI of Tank/Containers for safety assessment of carrying carbon dioxide, nitrogen, oxygen, helium& argon gases at M/S; Linde SIGAS , Dammam, KSA for Client Sabic, KSA regarding periodicinspection , calibration validity of pressure , vacuum gauges & pressure relief valves, vehiclefitness certificate, valid vehicle licences, condition of level gauges, presence of adequateequipments like fire extinguishers, antislip powder, hoses, certificate of cleaning & permit fortransport of hazardous material.

TPI for Electric Over Head Travelling Cranes for performance / Functional Test of light run test,shop run test, witness of DFT at frames, dimensional inspection & document review of all relateddocuments at M/S; Eastern Morris Crane Co. Ltd ,Dammam, KSA for BV China for Client SEPCO IIIof Al-Zulfi Project as New Al-Zulfi (#9064) 380/132/33 kV BSP, Riyadh, KSA for Saudi ElectricityCompany as end user. .

TPI of Offshore Rig # NJB 334, Manifa for witnessing hydrostatic pressure tests & Plugschangeover as per working & design pressure of Boom burners of M/S: Schlumberger Middle East.Dhahran Base, KSA.

TPI of Offshore Rig : Zuluf GOSP-2, Tanajib, KSA for MFC. Risk based Inspection as per working &design parameters of pipes & equipments of of M/S: Zuluf GOSP-2 ,Tanajib, KSA.

5 of 9

TPI for witnessing hydrostatic pressure tests as per working & design pressure of CS Pipes at M/S:Welspun Middle East Pipes Co. Ltd. Dammam, KSA.

TPI for visual ,dimensional and functional inspection as per ITP ,working procedures & designdocuments at M/S: Saudi Pump Factory, Riyadh, KSA. The scope of inspection includespreparation of Inspection Report as per Inspection of Compliance with purchase order description& specifications. Surface Cleanliness , Profile Monitoring & Monitoring Coating Application.Witnessing pump performance test, mechanical run test & Air test as per API standards. Inspection, equipment storage & handling, Final Documentation & Load out. Pre inspection of Material &welding Consumable. Witnessing of Hydro test, pneumatic testing, surge vessels & values .Inspection of Fit up of the joint before start welding Operation as per the Detail Drawing.Performing QC inspection activities in accordance with the ITP’s, procedures, applicable codes,standards and specifications. Surface Preparation & Painting Inspection of Piping & Structure.

TPI for visual , thickness & dimensional cement lining & coating Inspection of Spools, Tees &Elbows at M/S: Raymonds Saudi Arabia Ltd. Dammam-Jubail Highway , KSA.

TPI for visual, dimensional & operational Inspection of Gas Fired boilers & LPG Tanks at M/S:Intercontinental Hotel , Jubail, KSA. Pressure temperature gauges & safety relief valvescalibration certificates were witnessed.

TPI for visual, safety and functional Inspection of MWD Units / Safety Porta Cabins at M/S: BakerHughes Co. Ltd. & Halliburton Co. Ltd. Dammam, KSA.

TPI for witnessing function test , pressure test & visual dimensional inspection of the Lube OilSystem for Blower driver at M/S: Colfax-Baric System , Dammam , Saudi Arabia.

TPI for visual & functional fitness Inspection of Trucks at M/S: Baker Petrolite Saudi Company Ltd.Dammam, KSA.

TPI for Visual & dimensional inspection of Spiral Wound metallic and non-metallic Gaskets forClient: L & T Hydrocarbon Engineering Limited, India at M/S: Al-Iman Factories Company,Dammam, KSA.

TPI for Visual & dimensional inspection of Spiral Wound metallic and non-metallic Gaskets forClient: GS Engineering & Construction Corp. at M/S: Delmon Industrial and Mechanical InsulationCompany, Dammam, KSA.

TPI for visual & dimensional Inspection of CS Pipes at M/S: Gerab National Enterprises warehouse.Dammam, KSA. The inspection performed on the basis of certificates provided, MTC review ,Sampling identification for check testing for 3.2 certification , checking of heat number, length,diameter of CS Pipes, marking the heat number, pipe size , schedule number & sign on each CSPipe for sampling and testing.

TPI for LOCK OUT-TAG OUT (LOTO) Safety Procedures Preparation & Implementation as ResidentInspection Safety Engineer at M/S: Al-Safi Danone Co. Ltd. Al-Kharaj , Riyadh, KSA related tosteam, process & instrumentation air/pneumatic system , mechanical, electrical, hot/chilledwater energy isolation during the operation , maintenance & shut down processes.

TPI as Corrosion Inspection Engineer for OSI (On Steam Inspection ), Gap Analysis & RBI (Risk basedInspections) of M/S: Saudi Aramco (QATIF & JUMAYAH GOSP-1 Gas Gathering) , KSA. ( Total=15nos. of plants) are under process from dated : September 2013 to July 2014. The scope of workincludes the calculation of existing TMLs, CMLs, HLSs, addition , deletion & relocation of newTMLs/CMLs according to relevant corrosion class , material of construction & damage mechanismas per SAES-1135 , SAES-A-135 , SAEP-343, API 580 & API 571.Preparation of final report includingpiping and equipment corrosion circuits , PFDs, P & IDs, Isometric drawings, damage mechanismreport & corrosion loops report after marking of TML./CML & HLS as per above said specifications& standards.

TPI as Auditor for Vendor Assessment of Studs Bolts related to ISO 9001:2008 for Client: Hitachi,Japan of M/S: Arabian Fasteners Engineering and Fabrication Services, Dammam, KSA, M/S: ITTSaudi Company (ITT Pumps), Dammam, KSA, M/S: Al-Iman Factories Company Dammam, KSA formetallic & non-metallic gaskets, M/S: Delmon Industrial and Mechanical Insulation CompanyDammam, KSA for metallic & non-metallic gaskets. M/S: Saudi Bisan Gasket Factory Dammam,KSA for metallic & non-metallic gaskets & M/S: Hidada Contracting Company, Jeddah, KSA. Thescope of work includes checking & verification of quality manual, company policy, manufacturingstandard operating procedures (SOP) for process ,quality control & quality assurance, sales controldocuments, receiving & releasing of raw materials & goods procedures, internal trainings &Customer feed back forms as per Audit Check List, Vendor evaluation & inspection reportpreparation.

As Welding/Piping Inspector:

Insuring availability of approved WPS to welders & site supervisor. Receives raw material, conduct dimensional & visual inspection , check if heat numbers, coil

numbers, size & all specifications matches with the material certificate & free from damage.

6 of 9

Check if machine is in good condition & with in-date calibration sticker. Visual/Dimensional Inspection of the Welding Consumables (Size, MTC’S) as per WPS & their Storage

according to the Project Specification/QC procedure. Witnessing welder’s qualification as per WPS to be used. Conduct visual & dimensional inspection of fit ups & surface condition as per WPS. Check if welding process is in accordance with the WPS, weather condition should not affect welding,

check if preheating is required. Inspection of pipe spool fabrication & erection as per approved isometric drawings & plan view

drawings respectively. Fit up inspections of pipe spools & jacketed pipe line spools as per approved WPS, Approved Isometric

Drawings & client specifications. Dimensional inspection of completed Pipe Spools. Alignment inspection of piping components with stationary & rotating equipments.. Review of Positive Material Identification (PMI) to check chemical composition of material & welding

joints. Final line check inspection & preparation of punch list. Welding parameters (Voltage, current & speed) as per WPS. Grinding, gouging & cleaning is done by an approved method Check if minimum inter pass temperature is in accordance with WPS Mark adjacent to the weld or joint the identification of the joint as per drawing, the identification of

the welder and the WPS being used. Conduct visual & dimensional inspection of weld as per WPS & make sure weld is suitable for NDT. Request for NDT inspection & monitor the result, request for PWHT if required. Review of RT Films, UT,MT& PT Reports Making of discrepancy report if non-conformance of procedures is being observed. Prepare daily welding report. Line checking & making punch list according to drawings. Pipes & Spools are protected from damage & contamination. Check dimensionally the fabricated spools & their orientations as per drawing. Checking valves orientation, flow directions & levelness of erected spools, bolted flange assembly,

strainer assembly, blind flanges, fittings, supports, gaskets & all piping components as per drawing. Preparing test packages for hydrostatic testing & monitoring all Inspection activities regarding

hydrostatic testing with co-ordination to client. Making as-builts drawing of the Piping & Structure and insuring latest revision has been issued. Check piping spool traceability; make sure that tags are attached before painting & erection. Raise RFI- request for inspection to clients. Witness tie-end activities & make sure standard procedure has been implemented as per client’s

requirement. Insuring safe working during the job by following safety procedure. Keep records of inspection and arrange systematically for future reference & verification. Ensure all QC records before releasing for painting and insulation. Dimensional Check & visual Inspection. Pump inspections & preparation of Inspection Report. Inspections related to rotary equipment’s & steam generators. Inspection of Compliance with purchase order description & specifications. Surface Cleanliness , Profile Monitoring & Monitoring Coating Application. Witnessing pump performance test, mechanical run test & Air test as per API standards. Inspection of equipment storage & handling, Final Documentation & Load out. Pre inspection of Material & welding Consumable. Witnessing of Hydro test, pneumatic testing, surge vessels & values . Inspection of Fit up of the joint before start welding Operation as per the Detail Drawing. Performing QC inspection activities in accordance with the ITP’s, procedures, applicable codes,

standards & specifications. Surface Preparation & Painting Inspection of Piping & Structure.

As QA/QC Engineer:

Prepare inspection plans & testing procedures & getting approval from client. Review & recheck all inspection & testing documentations such as reports, certificates and

calibrations. Monitor daily activities of QA/QC inspectors. Lead & motivates the team of inspectors assigned to each area of responsibility. Attend meetings regarding implementations of QA/QC procedures. Coordinates with production department with their daily activities to prevent hampering of production

output in implementation of QA/QC procedures.

7 of 9

Prepare & organize procedure as per client‘s requirements with respect to standards andspecifications.

Attend trainings & seminars related to QA/QC procedures, standards and implementation. Submission of Record to Client for Final Documentation/Dossier.

As Coating Inspector:

Review of coating procedure, inspection & test plan , scope of work, material data & safety sheet. Review certificates for raw material (abrasives, coating material) including chemical analysis report

for abrasives showing contents of chlorides, sulphates, carbonates. Surface to be coated is free of contaminants such as oil, grease, and spatters etc which are injurious

to coating application. Insuring environmental conditions (dew point, relative humidity, metal temperature) as per

procedure. Blast clean material (garnet, slag, shots, grit etc) is as per procedure requirement & its storage is

maintained as per manufactures recommendations. Witness blotter test to insure contamination free compressed air. Surface cleanliness grade & profile is achieved using testex, press-o-film & profile is free from slivers,

laps, laminations, sharp edges, dust, dirt etc. Witness chloride content test. Areas not to be coated are masked prior to coating. Elapse time between blasting & coating is maintained. Coating material used is under shelf life & mixing is done as per manufacturing recommendation. Coating application & thickness achieved is as per procedure/manufacture recommendation. Insuring calibration & validation of the equipments used for thickness measurement. Performing visual inspection to insure even coverage, uniform appearance, colour, gloss of the coating

applied & that coating is free of irregularities like sags, runs, blisters, fish eyes, bubbles, puckers,voids, wrinkles, breaks etc.

Witness holiday detection. Witnessing laboratory testing such as cathodic disbondment, indentation, impact test, peel strength,

DSC, elongation, Foaming and tensile test. Insuring identity of the coated items is maintained by stencils marking / tagging system. Confirming all required documentation is completed , arranged systematically for any kind of

verification & future reference.

As Auditor/Vendor Assessment of ISO 9001:2008:

Preparation of Vendor Assessment report, Audit check List & Vendor evaluation Sheet on the basis of: Checking & verification of Company Quality Manual & company policy as per signed by GM or CEO ,Rev

No. & date of revision. Checking & verification of manufacturing standard operating procedures (SOP) for process ,quality

control & quality assurance, sales control procedures, receiving & releasing of raw materials & goodsprocedures.

Checking & verifications of Company internal Audits & awareness trainings as per yearly schedule. Checking & verification of filled Customer feed back forms, approved vendor list as per Audit Check

List, Vendor evaluation & inspection report preparation. Checking & verification of Aramco agreement & vendor code. Review of procedures for inspection & test plan, and scope of work, material data & QA/QC record as

per ISO 9001:2008.

As Process & ISO Tanks Inspection Engineer:

Review of inspection procedures, inspection & test plan, scope of work, safety data sheets ,tanks dataplate marking as per designed & as-built drawings & inspections record.

Review certificates of calibration for the pressure , temperature & level gauges present on the ISOtankers for Ethyle alcohol, benezene & hazardous chemicals etc .

Performance & witness of UT thickness tests, hydrostatic or pneumatic tests, soap & leak tests, Witness of air & pressure drop test by pressure gauge through compressor. Visual & dimensional inspection of ISO Tankers as per manufacturer/vendor data sheet . Surface to be coated is free of contaminants such as oil, grease, and spatters etc which are injurious

to coating application. Monitoring the external body of the tanker be free from the cracks, leakage & corrosion rate is under

control limits as per damage mechanism.

8 of 9

Monitoring & witness of stored volatile & hazardous fluids of ISO Tankers is as per procedurerequirement & its storage is maintained as per manufactures recommendations. .

Coating application & thickness achieved is as per procedure/manufacture recommendation. Insuring calibration & validation of the equipments used for thickness measurement. Witness holiday detection if required. Insuring identity of the coated items is maintained by stencils marking / tagging system. Confirming all required documentation is completed properly, arranged systematically for any kind of

verification & future reference.

Operation & performance of Ethyle Alcohol, methylated spirit, fusel oil & venasses plants through DCS(Digital control system) panels.

February 2012 to January 2013Sr. QA/QC Engineer Nem Power Systems, H/O: Germany.

Qurayyah Combined CyclePower Plant II, Qurayyah, Saudi Arabia.(Client: Saudi Electricity Company & Arabian Bemco Contracting Co.)

Reported to Head QA/QC

Prepared all documents and formats as per client’s requirements. Responsible for Ensuring Inspection of GT (Gas Turbine), maintenance, Insulation & Painting of

HRSG (Heat Recovery Steam Generation) BYPASS System. Documented all inspections activities during shutdown of Diverter Dampers. Performing and planning all maintenance activities of Diverter Dampers within limited tenure. Prepared all reports as per inspection frequencies of Client. Documented and witnessed overhauling of insulation wool & Liner plates installation. Updating and up keeping all documentation records. Responsible for the Implementation of the Quality Inspection Plan at Project site through a well-

managed team of activity Inspectors. Responsible for sending Inspection Reports and other relevant data, as and when required, to the

Head QA\QC. To Ensure The Inspection of Structural maintenance in Accordance to Client’s Specifications. Responsible for maintaining up-to-date records as per Customer requirements to submit a final

dossier to Customer. Monitoring and follow up of maintenance movement within the concerned departments.

July 2010 to January 2012Sr. QA/QC Engineer Sinsina Corner Company for Contracting, H/O :Jubail, Saudi Arabia.

Qurayyah Combined Cycle Power Plant II, Qurayyah, Saudi Arabia.(Client: Saudi Electricity Company & Arabian Bemco Contracting Co.)

Reported to QA/QC Manager

Responsible for Ensuring Inspection of GT (Gas Turbine), Maintenance, Insulation & Painting ofHRSG BYPASS System.

Responsible for the Implementation of the Quality Inspection Plan at Project site through a well-managed team of activity Inspectors.

Updating & maintaining the calibration certificates & Welders IDs. Prepare , maintain the Project Quality Plan & ITPs & update according to the Projects as per

operational quality procedures. Responsible for sending Inspection Reports and other relevant data, as and when required, to the

Head QA\QC. To Ensure The Inspection of Structural Supports in Accordance to Code AWS D1.1 & Client’s

Specifications. Responsible for maintaining up-to-date records as per Customer requirements to submit a final

dossier to Customer.

Dec 2007 to June 2010Quality Control Engineer Company: Pakistan Standards & Quality Control Authority,

Lahore , Pakistan.Reporting to Manager QA/QC

Working Experience at the PSQCA whose tasks are as under; Inspection of the Industries & Import of 78 compulsory items related to Chemicals i.e Cement

,Natural & Bottle Drinking Water, Banaspati Ghee & Cooking Oil ,Carbonated Beverages & FoodGrade Items etc to check the quality of the product ,calibration of the plant & lab equipments.

Intimation to the Industries according to the test results obtained from unit lab & QCC, PSQCA ,Lahore and follow up action related to the conformity & non-conformity.

9 of 9

Case processing for the grant or renewal of the CM-License if the product conform to the relevantPSS & fulfill all the documents.

Issuing notices to the industries if the product is substandard.

Issuing notices to the industries regarding conformity assessment matters.

Aug 2006 to Dec 2007Sr. Process Engineer Premier Industrial Chemicals & Mfg. Co, Sheikhupura, Pakistan.

Reported to Process & Production Manager

Working Experience in the establishment & Production at the Ethyl Alcohol & Vinasses Plants whosetasks & achievements are as under ;

Erection ,commissioning & production of Ethanol & Vinasses at ethanol distillery. Production of Industrial Alcohol, Fuel Grade Alcohol, Fusel Oil, Super fine Alcohol, & Vinasses

(which is used as the raw material of the Boiler). DCS experience at Centum CS 3000 R3, manufacturer YOKOGAWA. To handle the start up & shutdown problems of the distillery & vinasses plants. Up keeping of process & quality data received from different sides of the distillery & vinasses

sections. Plant inspection of Production items , components & bulk materials. Sample inspection & laboratory testing of product after random intervals of time, daily & on

weekly basis. Organizing and coordinating trainings / company orientation for new inductees.

Dec 2004 to July 2006PROCESS ENGINEER Style Textile Pvt Ltd; Kotlakhpat , Pakistan.

(Client: Nike, Tommy Hillfigure, Hangten, Blue Marlin.)Reported to Processing Manager

Working Experience in the Dyeing Section to monitor & enhance the production of dyeing lots. To prepare the dyeing recipes by adjusting the amount of the dyes & %age of the chemicals before

the dyeing process. To give addition or removing of the dyes to the lots to match the standard according to the

requirements. Dyeing lots programmes feeding on DCS (Digital Control System) panels of Theis, Fong & Softflow

machines. Performing and planning all Dyeing activities within limited tenure. Prepared all reports as per inspection frequencies of Client. Documented and witnessed overhauling of dyes, chemicals & laboratory sample testing. Overhauling and testing of control valves and mechanical valves. To manage & update the daily & weekly programmes of the dyeing on the computer panels &

register.

REFRENCESReferences will be furnished if desired.