Croma Uputstvo
-
Upload
bwana-srbin -
Category
Documents
-
view
234 -
download
0
Transcript of Croma Uputstvo
-
8/20/2019 Croma Uputstvo
1/258
-
8/20/2019 Croma Uputstvo
2/258
Dear Customer,
Thank you for selecting Fiat and congratulations on your choice of a Fiat Croma.
We have written this handbook to help you get to know all your new Fiat Croma features and use it in the best possible way.
You should read it right through before taking the road for the first time.
You will find information, tips and important warnings regarding the driving of your car to help you derive the maximum from yourFiat Croma technological features.
You are recommended to read carefully the warnings and indications, marked with the respective symbols, at the end of the page:
personal safety;
the car’s wellbeing;
environmental protection.
The enclosed Warranty Booklet lists the services that Fiat offers to its Customers:
❒ the Warranty Certificate with terms and conditions for maintaining its validity
❒ the range of additional services available to Fiat Customers.
Best regards and good motoring!
This Owner Handbook describes all Fiat Croma versions. As a consequence, you should consider onlythe information which is related to the engine and bodywork version of the car you purchased.
-
8/20/2019 Croma Uputstvo
3/258
MUST BE READ!
K
REFUELLING
Petrol engines: only refuel with unleaded petrol with octane rating (RON) not less than 95.
Diesel engines: only refuel with diesel fuel conforming to the European specification EN590.
Using other products or mixtures may damage the engine beyond repair and cause the forfeiture of the warranty cov-er for caused damages as a consequence.
ENGINE STARTING
Petrol engines: make sure that the handbrake is engaged; set the gearshift lever to neutral (positions P or N withautomatic transmission); fully depress the clutch pedal (or brake pedal with automatic transmission) without press-ing the accelerator, then turn the ignition key to START and release it as soon as the engine has started.
Diesel engines: make sure that the handbrake is engaged; set the gearshift lever to neutral (positions P or N with
automatic transmission); fully depress the clutch pedal (or brake pedal with automatic transmission) without press-ing the accelerator, then turn the ignition key to ON and wait for the Y and m warning lights to go off; turn theignition key to START and release it as soon as the engine has started.
PARKING ON FLAMMABLE MATERIAL
While working, the catalyst develops a very high temperature. Do not park the car over grass, dry leaves, pine nee-dles or any other inflammable materials: risk of fire.
RESPECTING THE ENVIRONMENT
The car is fitted with a system that allows continuous diagnosis of the components correlated with emissions to en-sure better respect for the environment.
-
8/20/2019 Croma Uputstvo
4/258
ELECTRICAL ACCESSORIES
If, after buying the car, you decide to add electrical accessories (that will gradually drain the battery), visit a FiatDealership. They can calculate the overall electrical requirement and check that the car’s electric system can sup-port the required load.
CODE card
Keep the code card in a safe place, not in the car.
SCHEDULED SERVICING
Correct maintenance of the car is essential for ensuring it stays in tip-top condition and safeguards its safety fea-tures, its environmental friendliness and low running costs for a long time to come.
THE OWNER HANDBOOK CONTAINS…
… information, tips and important warnings regarding the safe, correct driving of your car, and its maintenance.Pay particular attention to the symbols " (personal safety) # (environmental protection)! (the car’s wellbeing).
-
8/20/2019 Croma Uputstvo
5/258
4
S A F E T Y
D E V I C E S
C O R R E C T U S E
O F T H E C A R
W A R N I N G
L I G H T S A N D
M E S S A G E S
I N A N
E M E R G E N C Y
C A R
M A I N T E N A N C E
T E C H N I C
A L
S P E C I F I C A T
I O N S
I N D E X
D A S H B O A R D
A N D C O N T R O L S
INSTRUMENT DASHBOARD........................................... 5
INSTRUMENT PANEL......................................................... 6
SYMBOLS ................................................................................ 8
THE FIAT CODE SYSTEM.................................................. 9THE KEYS ............................................................................... 10
ALARM .................................................................................... 14
DEAD LOCK DEVICE......................................................... 16
IGNITION DEVICE .............................................................. 19
ON BOARD INSTRUMENTS ............................................ 20
MULTIFUNCTIONAL DISPLAY ...................................... 22
RECONFIGURABLE MULTIFUNCTIONAL DISPLAY .. 25DISPLAY FUNCTIONS........................................................ 28
TRIP COMPUTER................................................................. 36
SEATS....................................................................................... 39
HEAD RESTS.......................................................................... 42
STEERING WHEEL............................................................... 43
REAR VIEW MIRRORS ....................................................... 44
HEATING/AIR CONDITIONING SYSTEM ................... 47
MANUAL AIR CONDITIONER........................................ 49
AUTOMATIC AIR CONDITIONER................................ 52
EXTERIOR LIGHTS.............................................................. 62
WINDOW CLEANING...................................................... 65
CRUISE CONTROL ............................................................. 68
CEILING LIGHTS .................................................................. 70
CONTROLS........................................................................... 71
INTERIOR EQUIPMENT..................................................... 74SUN ROOF............................................................................. 78
DOORS................................................................................... 81
ELECTRIC WINDOW REGULATORS ........................... 82
BOOT...................................................................................... 84
ENGINE HOOD ................................................................... 90
ROOF RACK/SKI RACK..................................................... 92
HEADLAMPS.......................................................................... 93ABS SYSTEM........................................................................... 94
ESP SYSTEM............................................................................ 96
ASR SYSTEM .......................................................................... 97
EOBD SYSTEM ...................................................................... 98
T.P.M.S. SYSTEM.................................................................... 99
CAR RADIO........................................................................... 100
USER PURCHASED ACCESSORIES................................. 101
PARKING SENSORS ............................................................ 102
VEHICLE REFUELLING........................................................ 104
ENVIRONMENTAL PROTECTION................................. 105
D SH O RD ND CONTROLS
-
8/20/2019 Croma Uputstvo
6/258
DASHBOARD
The presence and the position of the instruments and warning lights may vary according to the versions.
1. Side air vent - 2. Left steering column stalk: external lights - 3. Instrument panel and warning lights - 4. Right steering columnstalk: windscreen, rear window wiper and trip computer controls - 5. Central air vents - 6. Sound system - 7. Front passenger airbag - 8. Glovebox - 9. Heating/ventilation/climate controls - 10. Gearshift lever - 11. Driver’s knees air bag - 12. Driver’s air bag -13. Cruise control lever - 14. Control unit access door - 15. Control plate.
5
S A F E T Y
D E V I C E S
C O R R E C T U S E
O F T H E C A R
W A R N I N G
L I G H T S A N D
M E S S A G E S
I N A N
E M E R G E N C Y
C A R
M A I N T E N A N C E
T E C H N I C
A L
S P E C I F I C A T
I O N S
I N D E X
D A S H B O A R D
A N D C O N T R O L S
F L 5 6m
fig. 1
-
8/20/2019 Croma Uputstvo
7/258
6
S A F E T Y
D E V I C E S
C O R R E C T U S E
O F T H E C A R
W A R N I N G
L I G H T S A N D
M E S S A G E S
I N A N
E M E R G E N C Y
C A R
M A I N T E N A N C E
T E C H N I C
A L
S P E C I F I C A T
I O N S
I N D E X
D A S H B O A R D
A N D C O N T R O L S INSTRUMENT PANEL 1.8 - 1.9 Multijet 8V versions with
multifunctional display
A Speedometer (speed indicator)
B Fuel level gauge with reservewarning light
C Engine coolant temperature gaugeand excessive temperature warning
lightD Rev counter
E multifunctional display
m c Warning lights fitted onMultijet versions
t Warning light fitted on versionswith automatic transmission
1.8 - 1.9 Multijet 8V withreconfigurable multifunctional display
A Speedometer (speed indicator)
B Fuel level gauge with reservewarning light
C Engine coolant temperature gaugeand excessive temperature warning
lightD Rev counter
E Reconfigurable multifunctional display
m c Warning lights fitted onMultijet versions
t Warning light fitted on versionswith automatic transmission
F L 5 4m
F L 5 5m
fig. 2
On versions 1.8 the end scale value of the engine speed indicator is 8000 rpm.
On versions 1.8 the end scale value of the engine speed indicator is 8000 rpm.
-
8/20/2019 Croma Uputstvo
8/258
7
S A F E T Y
D E V I C E S
C O R R E C T U S E
O F T H E C A R
W A R N I N G
L I G H T S A N D
M E S S A G E S
I N A N
E M E R G E N C Y
C A R
M A I N T E N A N C E
T E C H N I C
A L
S P E C I F I C A T I O N S
I N D E X
D A S H B O A R D
A N D C O N T R O L S2.2 - 1.9 Multijet 16V versions -
2.4 Multijet 20V with multifunctionaldisplay
A Speedometer (speed indicator)
B Fuel level gauge with reservewarning light
C Engine coolant temperature gaugeand excessive temperature warninglight
D Rev counter
E Multifunctional display
m c Warning lights fitted onMultijet versions
t Warning light fitted on versionswith automatic transmission
2.2 - 1.9 Multijet 16V - 2.4 Multijet 20Vwith reconfigurable multifunctionaldisplay
A Speedometer (speed indicator)
B Fuel level gauge with reservewarning light
C Engine coolant temperature gauge
and excessive temperature warninglight
D Rev counter
E Reconfigurable multifunctional display
m c Warning lights fitted onMultijet versions
t Warning light fitted on versionswith automatic transmission
F L 5 7m
F L 5 6m
fig. 3
On Multijet versions the end scale value of the engine speed indicator is 6000 rpm.
On Multijet versions the end scale value of the engine speed indicator is 6000 rpm.
-
8/20/2019 Croma Uputstvo
9/258
8
S A F E T Y
D E V I C E S
C O R R E C T U S E
O F T H E C A R
W A R N I N G
L I G H T S A N D
M E S S A G E S
I N A N
E M E R G E N C Y
C A R
M A I N T E N A N C E
T E C H N I C A L
S P E C I F I C A T I O N S
I N D E X
D A S H B O A R D
A N D C O N T R O L S SYMBOLS
Special coloured labels have been attachednear or actually on some of the compo-nents of your car. These labels bear sym-bols that remind you of the precautionsto be taken as regards that particular com-ponent.
The plate summarising the symbols usedcan be found under the bonnet fig. 4.
fig. 4 F L 99m
-
8/20/2019 Croma Uputstvo
10/258
9
S A F E T Y
D E V I C E S
C O R R E C T U S E
O F T H E C A R
W A R N I N G
L I G H T S A N D
M E S S A G E S
I N A N
E M E R G E N C Y
C A R
M A I N T E N A N C E
T E C H N I C A L
S P E C I F I C A T I O N S
I N D E X
D A S H B O A R D
A N D C O N T R O L S
The electronic components in-side the key may be damaged if the key is submitted to sharpknocks.
OPERATION
Each time the key is fitted into the ignitionswitch, the Fiat CODE system control unitsends a recognition code to the engine con-trol unit to deactivate the inhibitor.The code is sent only if the Fiat CODE sys-tem control unit has recognised the code
transmitted from the key.Each time the ignition key is removed, theFiat CODE system deactivates the func-tions of the engine electronic control unit.If the code has not been recognised cor-rectly, the warning light Y (where pro-vided) turns on accompanied by the relat-ed message on the display (see chapter“Warning lights and messages”).
In this case, the key should be removed andrefitted; if the lock continues, possibly tryagain with the other key provided with thecar. If it is still not possible to start the carcontact a Fiat Dealership.
IMPORTANT Every key has its own code,which must be memorised by the systemcontrol unit. To memorise new keys, up toa maximum of eight, apply to Fiat Dealer-ship.
THE FIAT CODE SYSTEM
To further protect your car from theft, ithas been fitted with an engine immobilisingsystem. This system is automatically acti-vated when the ignition key is removed.
An electronic device, in fact, is fitted in each
ignition key grip. The device transmits a ra-dio-frequency signal when the engine isstarted through a special aerial built into theignition switch. The modulate signal, whichchanges each time the engine is started, isthe “password”, by means of which thecontrol unit recognises the key and enablesto start the engine.
Warning light Y coming onwhen driving
❒ If the warning light Y turns on, thismeans that the system is running aself-test (for example for a voltagedrop). At the first stop, turn the igni-tion key to OFF and then back to
ON: if no failure is detected warninglight Y will not come on.
❒ If the warning light Y stays on, re-peat the procedure described previ-ously leaving the key at OFF for over30 seconds. Should the inconveniencepersists, contact a Fiat Dealership.
-
8/20/2019 Croma Uputstvo
11/258
10
S A F E T Y
D E V I C E S
C O R R E C T U S E
O F T H E C A R
W A R N I N G
L I G H T S A N D
M E S S A G E S
I N A N
E M E R G E N C Y
C A R
M A I N T E N A N C E
T E C H N I C A L
S P E C I F I C A T I O N S
I N D E X
D A S H B O A R D
A N D C O N T R O L S THE KEYS
CODE CARD fig. 5
The car is delivered with two copies of theignition key and with the CODE cardwhich bears the following:
❒ the electronic code A❒ the mechanical key code B to be giv-
en to the Fiat Dealership when order-ing duplicate keys.
IMPORTANT In order to ensure perfectefficiency of the electronic devices con-tained inside the keys, they should never beexposed to direct sunlight.
fig. 5 F L 2m
All the keys and the CODEcard must be handed over tothe new owner when selling the car.
-
8/20/2019 Croma Uputstvo
12/258
11
S A F E T Y
D E V I C E S
C O R R E C T U S E
O F T H E C A R
W A R N I N G
L I G H T S A N D
M E S S A G E S
I N A N
E M E R G E N C Y
C A R
M A I N T E N A N C E
T E C H N I C A L
S P E C I F I C A T I O N S
I N D E X
D A S H B O A R D
A N D C O N T R O L S
KEY WITH REMOTE CONTROLfig. 6
This key operates the ignition switch.
Button Ë shall be used for remote open-ing of doors and tailgate and for remote
deactivation of the alarm (where provid-ed).
Button Á shall be used for remote lock-ing of doors and tailgate and for remoteactivation of the alarm (where provided).
Button R shall be used for remoteopening of the tailgate.
When unlocking the doors, the passen-ger’s compartment lights will come on for
a preset time.
fig. 6 F L m
Opening the doors and the tailgate
Briefly press button Ë for remote un-locking of doors, tailgate and fuel filler capand simultaneous alarm (where provided)deactivation, timed switching on of the in-ternal ceiling lights and double flashing of direction indicators.
Press button Ë for more than 2 secondsto open the windows.
Doors will be unlocked automatically if thefuel inertial cut-off switch comes into op-eration.
The “Set-up menu” on the display (seeparagraph “Multifunction display”) enablesto set the system so that by pressing but-ton Ë, only the driver’s door is unlocked.In this event, to unlock the other doorspress quickly button Ë twice.
IMPORTANT If the remote control doesnot work properly, it is still possible tocarry out the emergency opening proce-dure by using the metal insert set insidethe remote control (see “Emergencyopening using the metal insert of the key”).
Locking the doors and the tailgate
Briefly press button Á for remote lock-ing of doors, tailgate and fuel filler cap andsimultaneous alarm (where provided) ac-tivation, switching off of the internal ceil-ing lights and single flashing of direction in-dicators.
Press button Á for more than 2 secondsto close the windows. If the button isbriefly pressed twice, the dead lock deviceis activated (see paragraph “Dead lock de-vice”).
IMPORTANT If the remote control doesnot work properly, it is still possible tolock the car doors by following the pro-cedure described in paragraph “Emer-gency closing”
-
8/20/2019 Croma Uputstvo
13/258
12
S A F E T Y
D E V I C E S
C O R R E C T U S E
O F T H E C A R
W A R N I N G
L I G H T S A N D
M E S S A G E S
I N A N
E M E R G E N C Y
C A R
M A I N T E N A N C E
T E C H N I C A L
S P E C I F I C A T I O N S
I N D E X
D A S H B O A R D
A N D C O N T R O L S
Used batteries are harmful tothe environment. They should be disposed of as specified by law in the special containers
provided, or take them to a Fiat Deal-ership, which will deal with their dis- posal.
Opening the tailgateby the remote control
Press button R to open the tailgate byremote control even if the alarm (whereprovided) is on.
Opening the tailgate is accompanied by thedirection indicators flashing twice; clos-
ing is accompanied by a single flash (onlyif the alarm is on).
If the alarm is on, when the tailgate isopened the alarm system switches off vol-umetric protection and the tailgateperimetral protection sensor.
When closing the tailgate again, volumet-ric and perimetral protection sensors arerestored.
IMPORTANT If the remote control doesnot work properly, it is however possi-ble to open the tailgate through the me-chanical lever set on the lock inside theboot (see paragraph “Boot” in this sec-tion).
LED signals on door lock buttonfig. 7
When locking the doors, led A switcheson for about 3 seconds and than startsflashing (deterrence function).
Once doors are locked, if one or moredoors or the tailgate are not closed cor-rectly, the led and direction indicatorsstart flashing quickly.
Replacing the battery of the keywith remote control fig. 8
To replace the battery, proceed as follows:
❒ move aside lever A and take out the
emergency metal insert B;❒ take out the battery case C using the
emergency metal insert, move asidebattery D and replace it making surethe bias is correct;
❒ refit the battery case C and the emer-gency metal insert B inside the key.
Request for additional remotecontrols
The system can recognise up to 8 keys withincorporated remote control. Should a newkey with remote control be necessary, con-tact a Fiat Dealership, taking with you the
CODE card and the keys, a personal iden-tity document and the car’s ownership doc-uments.
fig. 7 F L 382m fig. 8 F L m
-
8/20/2019 Croma Uputstvo
14/258
13
S A F E T Y
D E V I C E S
C O R R E C T U S E
O F T H E C A R
W A R N I N G
L I G H T S A N D
M E S S A G E S
I N A N
E M E R G E N C Y
C A R
M A I N T E N A N C E
T E C H N I C A L
S P E C I F I C A
T I O N S
I N D E X
D A S H B O A R D
A N D C O N T R O L S
EMERGENCY CLOSINGfig. 11
To lock the doors if the remote controldoes not work properly, proceed as fol-lows:
❒fit the metal insert into the slot C seton the doors and turn it in the direc-tion of the arrow (as shown in the fig-ure).
IMPORTANT Before carrying out theemergency door locking, check whetherthe independent boot locking function onthe multifunction display set-up menu isoff (see paragraph “Multifunction display”).
EMERGENCY OPENING USINGTHE METAL INSERT
If the remote control does not work properly (e.g.: battery flat), it is howeverpossible to use the emergency metal in-sert set inside the remote control.
The metal insert operates the driver’s sidelock (the pawl is located under the out-door handle fig. 9).
To use the metal insert set inside the re-mote control, proceed as follows fig. 10:
❒ move aside lever A and take out theemergency metal insert B, at the sametime.
fig. 9 F L 3m fig. 10 F L 2m fig. 11 F L 2 5m
The metal insert acts on the interesteddoor.
For emergency opening proceed as fol-lows:
❒ raise the handle, fit the metal insert in-
to the revolving plug and turn it coun-terclockwise;
❒ remove the key and lower the handle;
❒ raise the handle and open the door.
-
8/20/2019 Croma Uputstvo
15/258
14
S A F E T Y
D E V I C E S
C O R R E C T U S E
O F T H E C A R
W A R N I N G
L I G H T S A N D
M E S S A G E S
I N A N
E M E R G E N C Y
C A R
M A I N T E N A N C E
T E C H N I
C A L
S P E C I F I C A
T I O N S
I N D E X
D A S H B O A R D
A N D C O N T R O L S ALARM
(where provided)
WHEN THE ALARMIS TRIGGERED
The alarm comes into action in the fol-
lowing cases:❒ unlawful opening of one of the doors,
bonnet or boot (perimetral protec-tion);
❒ attempt to start the engine with unau-thorised key;
❒ battery cable cutting;
❒ presence of moving bodies in the pas-
senger’s compartment (volumetricprotection);
❒ abnormal raising/sloping of the car.
Depending on the markets, the cutting inof the alarm causes operation of the sirenand direction indicators (for about 26 sec-onds). The ways of operating and the num-ber of cycles may vary depending on themarkets.
A maximum number of sound/sight cyclesis however envisaged.
Volumetric and anti-raising protectionscan be cut off by operating the front ceil-ing light controls (see paragraphs “Volu-metric protection sensors” and “Anti-rais-ing sensor” on the following pages).
IMPORTANT The engine immobiliserfunction is guaranteed by the Fiat CODEsystem, which is automatically activated
when the ignition key is removed.
HOW TO ACTIVATETHE ALARM fig. 12
With the doors, bonnet and boot shut andignition key to OFF or removed, pointthe key with remote control or removed,point the key with remote control in thedirection of the car, then press and release
the button Á .With the exception of certain markets,the system sounds a “beep” and the doorsare locked.
Engagement of the alarm is preceded bya self-diagnostic test. If a fault is detectedthe system sounds a further warning“beep” and the display shows the relevantmessage (see section “Warning lights andmessages”).
In this case, switch the alarm system off bypressing button Ë, check that the doors,bonnet and tailgate are properly shut, thenswitch the system on again by pressingbutton Á.
fig. 12 F L m
If the doors, bonnet and boot are shutcorrectly and the warning “beep” is re-peated, the system self-diagnostics has de-tected a system operating fault. It is there-fore necessary to contact a Fiat Dealer-ship.
IMPORTANT Operating a door with themetal insert of the key will not activate thealarm.
IMPORTANT The alarm is built in com-pliance with the law and regulations of thedifferent destination countries.
-
8/20/2019 Croma Uputstvo
16/258
15
S A F E T Y
D E V I C E S
C O R R E C T U S E
O F T H E C A R
W A R N I N G
L I G H T S A N D
M E S S A G E S
I N A N
E M E R G E N C Y
C A R
M A I N T E N A N C E
T E C H N I C A L
S P E C I F I C A
T I O N S
I N D E X
D A S H B O A R D
A N D C O N T R O L SHOW TO DEACTIVATE
THE ALARM fig. 12
Press button Ë of the key with remotecontrol.
The system will react as follows (with theexception of certain markets):
❒ two brief flashes of the direction in-dicators;
❒ two brief “beeps”;
❒ door unlocking.
IMPORTANT Operating a door with themetal insert of the key will not activate thealarm.
To deactivate the alarm, turn the ignitionkey to ON.
fig. 13 F L 7 m
VOLUMETRIC PROTECTIONSENSORS
The volumetric sensors are located insidethe front ceiling light in the passenger’scompartment. To make sure that the vol-umetric sensors are working properly,
check that doors, boot, bonnet, windowsand sunroof (where provided) are shut.
Anti-raising protectiondeactivation
If it is necessary to switch on the alarmwhen animals or people are in the car,press button A-fig. 13 on the front ceil-ing light to deactivate the volumetric pro-
tection.Deactivation is needed also in the pres-ence of additional independent heater andwhen it is switched on with the remotecontrol.
fig. 14 F L 72m
ANTI-RAISING SENSOR
The anti-raising sensor detects any ab-normal car raising/sloping, even partial(e.g.: attempt to remove a wheel).
This sensor can detect the smallest car
sideslip angle changes, both longitudinallyand transversally. Sideslip angle changeslower than 0.5°/min. (e.g.: slow tyre flat-tening) are not considered).
Anti-raising protectiondeactivation
To deactivate the anti-raising protection(for example when towing the car withalarm on) press button B-fig. 14 on the
front ceiling light. Sensor cut-out stays onuntil activating the central door openingagain.
-
8/20/2019 Croma Uputstvo
17/258
16
S A F E T Y
D E V I C E S
C O R R E C T U S E
O F T H E C A R
W A R N I N G
L I G H T S A N D
M E S S A G E S
I N A N
E M E R G E N C Y
C A R
M A I N T E N A N C E
T E C H N I C A L
S P E C I F I C A
T I O N S
I N D E X
D A S H B O A R D
A N D C O N T R O L S
Once the dead lock devicehas been actuated, doors
cannot be opened from inside the car in any way whatsoever. For this rea-
son, make sure there are no personsleft inside the car.
INDICATIONS OF ATTEMPTSTO BREAK IN
Any attempt to break in is indicated byturning on of warning light Y (if pro-vided) on the instrument panel with therelevant message on the display (see sec-tion “Warning lights and messages”).
HOW TO CUT OFF THE ALARMSYSTEM
To deactivate the alarm system com-pletely (for instance during prolonged in-activity of the car) simply lock the car us-ing the emergency locking.
IMPORTANT To cut-out the alarm if re-mote control batteries are down or thesystem is failing, fit the key into the igni-tion switch and turn it to ON.
DEAD LOCK DEVICE(where provided)
This safety device enables to inhibit:
❒ door internal handles;
❒ button A and B for locking/unlockingthe doors fig. 15;
thus hindering doors opening from insidethe passenger’s compartment in case of attempt to break-into (e.g. window break-ing).
The dead lock device guarantees the bestprotection against unwanted access.Therefore, it should be actuated everytime the car is parked and left unattend-ed.
fig. 15 F L 3m
WARNING
If the battery of the key withremote control is down, the
dead lock device can be activated on-ly using the metal insert of the key onthe driver’s side door as described pre-
viously: in this case the dead lock de-vice is active only on the rear doors.
WARNING
-
8/20/2019 Croma Uputstvo
18/258
17
S A F E T Y
D E V I C E S
C O R R E C T U S E
O F T H E C A R
W A R N I N G
L I G H T S A N D
M E S S A G E S
I N A N
E M E R G E N C Y
C A R
M A I N T E N A N C E
T E C H N I C A L
S P E C I F I C A
T I O N S
I N D E X
D A S H B O A R D
A N D C O N T R O L S
Device activation fig. 16
The device is automatically activated onevery door in the following cases:
❒ pressing twice button Á of the keywith remote control
fig. 16 F L m
Device deactivation
The device is deactivated automatically onevery door in the following cases:
❒ when unlocking the doors by the re-mote control;
❒ when unlocking only the driver’s doorby the remote control;
❒ when turning the ignition key to ON.
Device activation is signalled by threeflashes of the direction indicators andflashing of the led on the driver door pan-el (see the table on next page).
Should one of the doors be not perfectlyclosed, the dead lock device is not acti-vated, thus preventing that a person get-ting into the car from the open door re-
mains blocked inside the passenger’s com-partment when he/she closes the door.
-
8/20/2019 Croma Uputstvo
19/258
18
S A F E T Y
D E V I C E S
C O R R E C T U S E
O F T H E C A R
W A R N I N G
L I G H T S A N D
M E S S A G E S
I N A N
E M E R G E N C Y
C A R
M A I N T E N A N C E
T E C H N I C A L
S P E C I F I C A
T I O N S
I N D E X
D A S H B O A R D
A N D C O N T R O L S The main functions that can be activated with the keys or with the emergency metals insert are the following:
Key with
remote control
Emergencymetalinsert
Directionindicatorsflashing (onlywith key withremote control)
LED on door lockbutton
IMPORTANT The emergency metal insert will unlock only the door.
IMPORTANT Window opening operation is a consequence of a door unlocking control; window closing operation is a consequenceof a door locking control.
Door openingand fuelfiller capunlocking
Press briefly
button Ë
Turn the key in acounter clockwisedirection(driver's side)
2 flashings
Turning off deterrence led
Door closingand fuelfiller caplocking
Pressing briefly
button Á
Turn the keyin a clockwisedirection(driver's side)
1 flashing
Turning on fixedfor about 3seconds, followedby deterrenceled flashing
Windowopening
Prolonged
pressing(over 2 seconds)on button Ë
–
2 flashings
Turning off deterrence led
Windowclosing
Prolonged
pressing(over 2 seconds)on button Á
–
1 flashing
Deterrence ledflashing
Dead lock (where
provided)
Double pressing
on button Á
–
3 flashings
Double flashing,followed bydeterrence ledflashing
Tailgateopening
Pressing on
buttonR
–
2 flashings
–
IGNITION SWITCH
-
8/20/2019 Croma Uputstvo
20/258
19
S A F E T Y
D E V I C E S
C O R R E C T U S E
O F T H E C A R
W A R N I N G
L I G H T S A N D
M E S S A G E S
I N A N
E M E R G E N C Y
C A R
M A I N T E N A N C E
T E C H N I C A L
S P E C I F I C A
T I O N S
I N D E X
D A S H B O A R D
A N D C O N T R O L SIGNITION SWITCH
The key can be turned to 3 different po-sitions fig. 17:
❒ OFF: engine off, key can be removed,steering column locked. Certain elec-trical devices (e.g.: sound system, pow-er windows…) can work.
❒ ON: driving position. All electrical de-vices are powered.
❒ START: engine starting.
The ignition switch is fitted with an elec-tronic safety system that, in the event theengine is not started, turns back the igni-tion key to OFF before repeating thestarting operation.
fig. 17 F L 4m
If the ignition device is tam- pered with (e.g.: attempted
theft), have it checked over by a FiatDealership as soon as possible.
WARNING
When getting out of the car,always remove the key to
prevent any occupants from acci-dentally activating the controls. Re-
member to engage the handbrakeand if the car is parked on uphill slopeto engage the first gear. If the car isfacing downhill, engage the reverse gear (position P with automatic trans-mission). Never leave unsupervised children in the car.
WARNING
STEERING COLUMN LOCK
Engaging
The steering column lock will engage 5seconds after removing the key from theignition switch (engine off).
DisengagingThe steering column lock will disengageafter fitting the key into the ignition switch.
IMPORTANT Switching the engine off when the car is running will not engage thesteering column lock. The multifunctiondisplay will show the relevant message(see section “Warning lights and Mes-sages”).
IMPORTANT If, after trying to turn theinstrument panel on and/or to start theengine, the display will show the message“Check vehicle protection system”, repeatthe operation rocking the steering wheelto facilitate steering unlocking. Displayingof this message does not impair steeringcolumn lock operation.
IMPORTANT When the vehicle is mo-ving, the electronic key must remain in the
ignition device. That ensures that the stee-ring lock is disabled during vehicle hand-ling (e.g., when the vehicle is towed).
S INSTRUMENTS
-
8/20/2019 Croma Uputstvo
21/258
20
S A F E T Y
D E V I C E S
C O R R E C T U S E
O F T H E C A R
W A R N I N G
L I G H T S A N D
M E S S A G E S
I N A N
E M E R G E N C Y
C A R
M A I N T E N A N C E
T E C H N I C A L
S P E C I F I C A T I O N S
I N D E X
D A S H B O A R D
A N D C O N T R O L S
When the engine is idling, the rev countermay indicate a gradual or sudden higher-ing of the speed.
This is normal as it takes place during nor-mal operation, for example when activat-ing the climate control system or the fan.
In particular a slow change in the speedpreserves the battery charge.
INSTRUMENTS
REV. COUNTER fig. 18
Rev counter shows engine rpm.
The rev. counter end of scale values canvary based on the version.
IMPORTANT The electronic injectioncontrol system gradually shuts off the flowof fuel when the engine is “over-revving”resulting in a gradual loss of engine pow-er.
It is absolutely forbidden tocarry out whatever after-
market operation involving steering system or steering column modifica-tions (e.g.: installation of anti-theftdevice) that could badly affect per-formance and safety, cause the lapse
of warranty and also result in non-compliance of the car with homolo- gation requirements.
WARNING
fig. 18 F L 5 2m
S
-
8/20/2019 Croma Uputstvo
22/258
21
S A F E T Y
D E V I C E S
C O R R E C T U S E
O F T H E C A R
W A R N I N G
L I G H T S A N D
M E S S A G E S
I N A N
E M E R G E N C Y
C A R
M A I N T E N A N C E
T E C H N
I C A L
S P E C I F I C A T I O N S
I N D E X
D A S H B O A R D
A N D C O N T R O L S
If the needle reaches the red area, stop the engine immedi-ately and contact a Fiat Deal-ership.
ENGINE COOLANTTEMPERATURE GAUGE fig. 20
The turning on of the warning light B in-dicates that the coolant fluid temperatureis too high; in this case, stop the engineand contact a Fiat Dealership.
This shows the temperature of the enginecoolant fluid and begins working when thefluid temperature exceeds approx. 50°C.
Under normal conditions, the needleshould move to different positions of thescale according to the working conditionsand engine cooling conditions.
FUEL LEVEL GAUGE fig. 19
This shows the amount of fuel left in thefuel tank.
The reserve warning light A turns on toindicate that approx. 7 to 9 litres of fuelare left in the tank.
E - tank empty.
F - tank full (see the indications given inparagraph “At the filling station").
Do not travel with the fuel tank almostempty: the gaps in fuel delivery could dam-age the catalyst.
IMPORTANT If the needle sets at the bot-tom of the scale (low temperature) withwarning light B on, it means that the sys-tem is malfunctioning. Contact a Fiat Deal-ership to have the system inspected.
SPEEDOMETER fig. 21
It shows the engine speed.
The speed indicator end of scale valuescan vary based on the version.
fig. 19 F L 5 3m fig. 20 F L 5 4m fig. 21
km/h
F L 5 5m
S MULTIFUNCTION
-
8/20/2019 Croma Uputstvo
23/258
22
S A F E T Y
D E V I C E S
C O R R E C T U S E
O F T H E C A R
W A R N I N G
L I G H T S A N D
M E S S A G E S
I N A N
E M E R G E N C Y
C A R
M A I N T E N A N C E
T E C H N
I C A L
S P E C I F I C A T I O N S
I N D E X
D A S H B O A R D
A N D C O N T R O L S MULTIFUNCTION
DISPLAY(where provided)
The vehicle may have a multifunctional dis-play that provides the user with useful in-formation, based on what was previously
set, while driving.
“STANDARD” SCREEN fig. 22
The standard screen shows the followingindications:A DateB Odometer (covered km or miles)C Clock D External temperature
E Headlight aiming position (only withdipped beam headlights on).
Note When opening one of the frontdoors, the display will turn on and showfor a few seconds the clock and the km ormi covered.
CONTROL BUTTONS fig. 23
+ To scroll the displayed menu and therelated options upwards or to increasethe value displayed.
MODE Brief press to open the menuand/or to move to next screenor to confirm the option re-quired.
Long press to go back to thestandard screen.
– To scroll the displayed menu and therelated options downwards or to de-crease the value displayed.
Note Buttons + and – activate differentfunctions according to the following situ-ations:
To adjust light inside the passengercompartment
– to adjust instrument panel, sound sys-
tem and automatic climate control systemdisplay brightness when standard screenis active.
Setup menu
– to scroll the menu options upwards anddownwards;
– to increase or decrease values during set-tings.
F L 29mfig. 23fig. 22 F L 7 m
L SSETUP MENU fig 24 Selecting a menu option Press button MODE for long:
-
8/20/2019 Croma Uputstvo
24/258
23
S A F E T Y
D E V I C E S
C O R R E C T U S E
O F T H E C A R
W A R N I N G
L I G H T S A N D
M E S S A G E S
I N A N
E M E R G E N C Y
C A R
M A I N T E N A N C E
T E C H N
I C A L
S P E C I F I C A T I O N S
I N D E X
D A S H B O A R D
A N D C O N T R O LSETUP MENU fig. 24
The menu comprises a series of functionsarranged in a “circular fashion” which canbe selected through buttons + and – toaccess the different select operations andsettings (setup) given in the following para-graphs.The setup menu can be activated by press-
ing briefly button MODE, only with thecar turned on (with car off, only the re-duced menu can be displayed).Single presses on buttons + or – will scrollthe setup menu options.Handling modes differ with each other ac-cording to the characteristic of the optionselected.
NOTE If the car is equipped with the Ra-dionavigation System, the only functionsthat can be adjusted/set through the in-strument panel display are the following:“Speed limit”, “Automatic headlight day-light sensor” (where provided) and “S.B.R.(Seat Belt Reminder) buzzer reactivation”(where provided). The other functions aredisplayed by and can be adjusted/setthrough the Radionavigation System dis-play.
Selecting a menu option
– press briefly button MODE to selectthe menu option to set;
– press buttons + or – (by single press-es) to select the new setting;
– press briefly button MODE to store thenew setting and to go back to the previ-ously selected menu option.
Selecting “Date” and “Set Clock”:
– briefly press button MODE to selectthe first value to change (e.g. hours /min-utes or year / month / day);
– press buttons + or – (by single press-es) to select the new setting;
– briefly press button MODE to store thenew setting and to go to the next setupmenu option, if this is the last one you will
go back to the previously selected option of the main menu.
Press button MODE for long:
– to quit the setup menu and to save on-ly the settings stored yet by the user (andconfirmed by pressing briefly buttonMODE).
The setup menu displaying is timed; whenquitting the menu due to timing expiry,only settings stored yet by the user (andconfirmed by pressing briefly buttonMODE) will be saved.
D L S Example: Example:
-
8/20/2019 Croma Uputstvo
25/258
24
S A F E T Y
D E V I C E S
C O R R E C T U S E
O F T H E C A R
W A R N I N G
L I G H T S A N D
M E S S A G E S
I N A N
E M E R G E N C Y
C A R
M A I N T E N A N C E
T E C H N
I C A L
S P E C I F I C A T I O N S
I N D E X
D A S H B O A R D
A N D C O N T R O L
Day
Year
MODEbrieflypressbutton
Month
Deutsch
Português
English
Español
Français
Italiano
Nederland
Polski
Example:
BELT BUZZER
SPEED BEEP
HEADL. SENSOR
SET TIMESET DATE
SEE RADIO
KEY
AUTOCLOSE
UNITS
LANGUAGE
BUZZER VOLUME
BUTTON VOL.
EXIT MENU
SERVICE
TRIP B DATA
fig. 24
Example:
MODEbrieflypressbutton
Briefly press button MODE to start surfing from thestandard screen. To surf the menu use buttons + or – .Note For safety reasons, when the car is running, it ispossible to access only the reduced menu (for settingthe “Speed limit”). When the car is stationary accessto the whole menu is enabled. On cars provided withthe Connect Nav+ system, many functions are displayedon the navigator display.
F L 95g
Turkçe
Brasilian
PASSENGER BAG
REAR SIDEBAGS
MENU
D L SRECONFIGURABLE A B
-
8/20/2019 Croma Uputstvo
26/258
25
S A F E T Y
D E V I C E S
C O R R E C T U S E
O F T H E C A R
W A R N I N G
L I G H T S A N D
M E S S A G E S
I N A N
E M E R G E N C
Y
C A R
M A I N T E N A N C E
T E C H N
I C A L
S P E C I F I C A T I O N S
I N D E X
D A S H B O A R D
A N D C O N T R O RECONFIGURABLE
MULTIFUNCTIONDISPLAY(where provided)
The car can be provided with the recon-figurable multifunction display that shows
useful information, according to the pre-vious settings made, necessary when dri-ving.
“STANDARD” SCREEN fig. 25
The standard screen shows the followingindications:A TimeB Date
C Odometer (displays the kilometres, ormiles, covered)
D Vehicle status signals (ex. doors openor the presence of ice on the road,etc.)
E Headlamp stability position (only withlow beams on)
F External temperatureNote When opening one of the front
doors, the display will turn on and showfor a few seconds the clock and the km ormi covered.
CONTROL BUTTONS fig. 26
+ To scroll the displayed menu and therelated options upwards or to increasethe value displayed.
MODE Brief press to open the menuand/or to move to next screen or to con-firm the option required.
Long press to go back to the standardscreen.
– To scroll the displayed menu and therelated options downwards or to de-crease the value displayed.
Note Buttons + and – activate differentfunctions according to the following situ-ations:
– to adjust instrument panel, sound sys-tem and automatic climate control sys-tem display brightness when standard
screen is active; – to scroll the menu options upwards anddownwards;
– to increase or decrease values during set-tings.
F L 29mfig. 26fig. 25
E
F
D C
A B
F L 5 8m
D O L S SETUP MENU fig. 27 Selecting an option in the main menu Selecting an option in the main menu with
-
8/20/2019 Croma Uputstvo
27/258
26
S A F E T Y
D E V I C E S
C O R R E C T U S E
O F T H E C A R
W A R N I N G
L I G H T S A N D
M E S S A G E S
I N A N
E M E R G E N C
Y
C A R
M A I N T E N A N C E
T E C H N
I C A L
S P E C I F I C
A T I O N S
I N D E X
D A S H B O A R D
A N D C O N T R O
SETUP MENU fig. 27
The menu comprises a series of functionsarranged in a “circular fashion” which canbe selected through buttons + and – toaccess the different select operations andsettings (setup) given below. For certainoptions (Set time and Units) there is a sub-menu.
The setup menu can be activated by press-ing briefly button MODE.
Single presses on buttons + or – will scrollthe setup menu options. Handling modesdiffer with each other according to thecharacteristic of the option selected.
If the car is equipped with Connect Nav+,the only functions that can be adjusted/setthrough the instrument panel display are
the following: “Dimmer”, “Speed Beep”,“Headl. sensor” (where provided), “Beltbuzzer” and “Passenger bag”. The otherfunctions are displayed by and can be ad-
justed/set through the Connect Nav+ sys-tem display.
Selecting an option in the main menuwithout submenu:
– press briefly button MODE to selectthe menu option to set;
– press buttons + or – (by single press-es) to select the new setting;
– press briefly button MODE to store the
new setting and to go back to the previ-ously selected menu option.
Selecting an option in the main menu withsubmenu:
– press briefly button MODE to displaythe first submenu option;
– press buttons + or – (by single press-es) to scroll all submenu options;
– press briefly button MODE to select
the displayed submenu option and to en-ter the relevant setup menu;
– press buttons + or – (by single press-es) to select the new setting;
– press briefly button MODE to store thenew setting and to go back to the previ-ously selected submenu option.
D O L S
DExample:
-
8/20/2019 Croma Uputstvo
28/258
27
S A F E T Y
D E V I C E S
C O R R E C T U S E
O F T H E C A R
W A R N I N G
L I G H T S A N D
M E S S A G E S
I N A N
E M E R G E N C
Y
C A R
M A I N T E N A N C E
T E C H N
I C A L
S P E C I F I C
A T I O N S
I N D E X
D A S H B O A R
A N D C O N T R ODay
Year MonthEnglish
Portugês
Español
Français
Deutsch
Italiano
SEAT BELT BUZZER
TRIP B DATA
SET DATE
SEE RADIO
KEY
AUTOCLOSEUNITS
LANGUAGE
BUZZER VOLUME
BUTTON VOLUME
SERVICE
Briefly press button MODE to start surfing from the standardscreen. To surf the menu use buttons + or -. Note For safe-ty reasons, when the car is running, it is possible to access on-ly the reduced menu (for setting “Dimmer” and “Speed Beep”).When the car is stationary access to the whole menu is enabled.On cars provided with Connect Nav+ many functions are dis-played on the navigator display.
p
fig. 27
F L4 23g
SET TIME
HEADLAMP SENSOR
SPEED BEEPEXIT MENU
Nederlands
PASSENGER AIRBAG
Turkçe
Brasilian
MODE
briefly pressbutton
MODE
briefly pressbutton
REAR SIDEBAGS
MENU
R D O
L S DISPLAY FUNCTIONS
-
8/20/2019 Croma Uputstvo
29/258
28
S A F E T Y
D E V I C E S
C O R R E C T U S E
O F T H E C A R
W A R N I N G
L I G H T S A N D
M E S S A G E S
I N A N
E M E R G E N C
Y
C A R
M A I N T E N A N C E
T E C H N
I C A L
S P E C I F I C
A T I O N S
I N D E X
D A S H B O A R
A N D C O N T R O
Note The possible setting is between 30and 250 km/h, or between 20 and 155mph depending on the unit set previous-ly (see “Distance unit (Dist. Unit)” para-graph described later. Every press on but-
ton +/ – increases/decreases by 5 units.Keeping the button +/ – pressed obtainsthe automatic fast increase or decrease.When you are near the required settingcomplete adjustment by single presses.
– briefly press button MODE to go back to the menu screen or press the buttonfor long to go back to the standard screenwithout storing settings.
To cancel the setting, proceed as follows:
– briefly press button MODE: (On) willflash on the display;
– press button – : (Off) will flash on thedisplay;
– briefly press button MODE to go back to the menu screen or press the buttonfor long to go back to the standard screenwithout storing settings.
Speed Beep (Speed limit)
With this function it is possible to set thecar speed limit (km/h or mph); when thislimit is exceeded the driver is immediate-
ly alerted (see section “Warning lights andmessages”).
To set the speed limit, proceed as follows:
– briefly press button MODE, the displaywill show wording (Speed Beep);
– press button + or – to select activation(On) or deactivation (Off) of the speedlimit;
– if selecting (On), press button + or – to select the required speed limit and thenpress MODE to confirm.
S U C O S(see Multifunctional display or Reconfigurable multifunctional display)
R D O
L SHeadlamp sensor Trip B data (Trip On/Off) Set time (Setting the clock)
-
8/20/2019 Croma Uputstvo
30/258
29
S A F E T Y
D E V I C E S
C O R R E C T U S E
O F T H E C A R
W A R N I N G
L I G H T S A N D
M E S S A G E S
I N A N
E M E R G E N C
Y
C A R
M A I N T E N A N C E
T E C H N
I C A L
S P E C I F I C
A T I O N S
I N D E X
D A S H B O A R
A N D C O N T R Op
(Automatic headlight sensor sensitivity adjustment)(where provided)
With this function it is possible to adjustthe light sensor sensitivity according to 3levels (level 1 = min. level, level 2 = av-erage level, level 3 = max. level); the high-
er the sensitivity is, the lower is the ex-ternal light intensity required to switch onthe lights.
To set the light level required, proceed asfollows:
– briefly press button MODE, the previ-ously set level will flash on the display;
– press button + or – to select the re-quired level;
– briefly press button MODE to go back to the menu screen or press the buttonfor long to go back to the standard screenwithout storing settings.
p ( p )
Through this option it is possible to acti-vate (On) or deactivate (Off) the Trip B(partial trip).
For further information see “Trip com-puter”.
For activation / deactivation, proceed as
follows: – briefly press button MODE: On or Off will flash on the display according to pre-vious setting;
– press button + or – to select the re-quired level;
– briefly press button MODE to go back to the menu screen or press the buttonfor long to go back to the standard screenwithout storing settings.
( g )
This function enables to set the clock through two sub-menus: “Time” and“Mode”.
Proceed as follows:
– briefly press button MODE, the displaywill show the two submenus “Time” and
“Mode”; – press button + or – to scroll the twosubmenus;
– select the required submenu and thenpress briefly MODE;
– if selecting “Time”: briefly press buttonMODE, “hours” will flash on the display;
– press button + or – for setting;
– press button MODE, “minutes” willflash on the display;
– press button + or – for setting.
R D
R O L S Note Every press on button + or – in-
/Set date (Setting the date) See radio (Audio repetition)
-
8/20/2019 Croma Uputstvo
31/258
30
S A F E T Y
D E V I C E S
C O R R E C T U S E
O F T H E C A R
W A R N I N G
L I G H T S A N D
M E S S A G E S
I N A N
E M E R G E N C
Y
C A R
M A I N T E N A N C E
T E C H N
I C A L
S P E C I F I C
A T I O N S
I N D E X
D A S H B O A R
A N D C O N T R creases/decreases by 1 unit. Keeping the
button pressed obtains automatic fast in-crease or decrease. When you are nearthe required setting complete adjustmentby single presses.
– if selecting “Mode”: briefly press but-ton MODE, “24h” or “12h mode will
flash on the display; – press button + or – to select “24h” or“12h”.
After setting, briefly press button MODEto go back to the submenu screen orpress the button for long to go back to themain menu screen without storing set-tings.
– press again button MODE for long to
go back to the standard screen or to themain menu according to the current menulevel.
This function enables to update the date(day – month – year).
To correct the date proceed as follows:
– briefly press button MODE: “year” willflash on the display;
– press button + or – for setting; – briefly press button MODE: “month”will flash on the display;
– press button + or – for setting;
– briefly press button MODE: “day” willflash on the display;
– press button + or – for setting.
Note Every press on button + or – in-
creases/decreases by 1 unit. Keeping thebutton pressed obtains automatic fast in-crease or decrease. When you are nearthe required setting complete adjustmentby single presses.
– briefly press button MODE to go back to the menu screen or press the buttonfor long to go back to the standard screenwithout storing settings.
With this function the display repeats in-formation relevant to the sound system.
– Radio: selected radio station frequencyor RDS message, automatic tuning acti-vation or AutoSTore;
– audio CD, MP3 CD: track number;
– CD Changer: CD number and track number;
– Cassette: operating method.
To activate (On) or to deactivate (Off)sound system info displaying proceed asfollows:
– briefly press button MODE: On or Off will flash on the display according to pre-
vious setting; – press button + or – to select the re-quired level;
– briefly press button MODE to go back to the menu screen or press the buttonfor long to go back to the standard screenwithout storing settings.
R D
R O L SKey Autoclose (Automatic central
d l ki h lli )Units (Setting units)
-
8/20/2019 Croma Uputstvo
32/258
31
S A F E T Y
D E V I C E S
C O R R E C T U S E
O F T H E C A R
W A R N I N G
L I G H T S A N D
M E S S A G E S
I N A N
E M E R G E N C
Y
C A R
M A I N T E N A N C E
T E C H N I C A L
S P E C I F I C
A T I O N S
I N D E X
D A S H B O A
A N D C O N T R
With this function it is possible to decidethe door opening mode by selecting oneof the following options:
– open doors: to unlock all doors, exceptthe tailgate
– open driver’s door (op. drv. door): tounlock just the driver’s door (where pro-vided)
– open all: to unlock every door includ-ing the tailgate
The car is delivered with this function in“Open all” mode.
Proceed as follows:
– briefly press button MODE, the previ-ous setting will flash on the display;
– press button + or – for setting; – briefly press button MODE to go back to the menu screen or press the buttonfor long to go back to the standard screenwithout storing settings.
door locking when travelling)
When activated (On), this function locksautomatically the doors when the carspeed exceeds 20 km/h.
To activate or to deactivate this functionproceed as follows:
– briefly press button MODE to displaythe submenu;
– briefly press button MODE: On or Off will flash on the display according to pre-vious setting;
– press button + or – to select the re-quired level;
– briefly press button MODE to go back to the menu screen or press the buttonfor long to go back to the standard screenwithout storing settings;
– Press again button MODE for long togo back to the standard screen or to themain menu according to the current menulevel.
With this function it is possible to set theunits through the submenu: “Distances”,“Consumption” and “Temperature”(where provided).
To set the required unit proceed as fol-lows:
– briefly press button MODE, the displaywill show the submenus;
– press button + or – to scroll the sub-menus;
– select the required submenu and thenpress briefly button MODE;
– if selecting “Distances”: pressing buttonMODE briefly, the display will show “km”or “mi” according to previous setting;
– press button + or – to select the re-quired level;
– if selecting “Consumption”: briefly pressbutton MODE the display will show“km/l”, “l/100km” or “mpg” according toprevious setting;
A R D
R O L S If the distance unit set is “km” the fuel con-
sumption unit will be displayed in km/l orLanguage (Selecting the language) Buzzer volume
(S tti th b l )
-
8/20/2019 Croma Uputstvo
33/258
32
S A F E T Y
D E V I C E S
C O R R E C T U S E
O F T H E C A R
W A R N I N G
L I G H T S A N D
M E S S A G E S
I N A N
E M E R G E N C Y
C A R
M A I N T E N A N C E
T E C H N I C A L
S P E C I F I C
A T I O N S
I N D E X
D A S H B O A
A N D C O N T R sumption unit will be displayed in km/l or
l/100km.
If set unit is “mi” the display will show fu-el consumption in “mpg”.
– press button + or – to select the re-quired level;
– if selecting “Temperature”: pressing but-ton MODE briefly, the display will show“°C” or “°F” according to previous set-ting;
– press button + or – to select the re-quired level.
After setting, briefly press button MODEto go back to the submenu screen orpress the button for long to go back to the
main menu screen without storing set-tings.
– press again button MODE for long togo back to the standard screen or to themain menu according to the current menulevel.
Display messages can be shown (after set-ting) in different languages: Italian, German,English, Spanish, French, Portuguese, Pole(where provided) Turkish and Brazilian.
To set the required language proceed asfollows:
– briefly press button MODE: the previ-ously set “language” will flash on the dis-play;
– press button + or – to select the re-quired level;