Mariagrazia Bertarini • PAOLO IOTTI • Tracey Sinclair Get ...
COSTRUZIONI ELETTROTECNICHE CEAR s.r.l. Via Bertarini 72 – 20061 – Carugate (MI) –Italy Ph....
-
Upload
madisyn-tea -
Category
Documents
-
view
219 -
download
3
Transcript of COSTRUZIONI ELETTROTECNICHE CEAR s.r.l. Via Bertarini 72 – 20061 – Carugate (MI) –Italy Ph....
COSTRUZIONI ELETTROTECNICHECOSTRUZIONI ELETTROTECNICHE CEAR s.r.l. CEAR s.r.l.Via Bertarini 72 – 20061 – Carugate (MI) –ItalyVia Bertarini 72 – 20061 – Carugate (MI) –Italy
Ph. +39 02 92.92.90.1 Fax. +39 02 92 15 16 70Ph. +39 02 92.92.90.1 Fax. +39 02 92 15 16 70
www.cearsistemi.itwww.cearsistemi.it – – [email protected]@cearsistemi.it
COMPANY INFORMATIONCOMPANY INFORMATION Located in Located in
CarugateCarugate(Milan – Italy)(Milan – Italy)
Founded in 1980Founded in 1980
Head Office’s and Head Office’s and workshop total workshop total surface : 4000 m2surface : 4000 m2
ACTIVITIESACTIVITIESDESIGN AND MANUFACTURINGDESIGN AND MANUFACTURING
M.V./L.V. Containerized Substations (*)M.V./L.V. Containerized Substations (*)
M.V./L.V. Heavy Duty & Compact Substations (*)M.V./L.V. Heavy Duty & Compact Substations (*)
Containerized Electrical and Control Room (*)Containerized Electrical and Control Room (*)Containerized Equipment Room (*)Containerized Equipment Room (*)
M.V. Switchgear Metal Enclosed and Metal Clad (*)M.V. Switchgear Metal Enclosed and Metal Clad (*)
L.V. Power Center (*)L.V. Power Center (*)
L.V. MCC Motor Control Center (*)L.V. MCC Motor Control Center (*)
L.V. Distribution Panel (*)L.V. Distribution Panel (*)
PLC Control Panels (*)PLC Control Panels (*)
Local Panel (*)Local Panel (*)
Industrial Weighing SystemsIndustrial Weighing Systems
(*)(*) EEx-p protection for Hazardous EEx-p protection for Hazardous Group I and Group II zone are availableGroup I and Group II zone are available
ACTIVITIESACTIVITIES
COMPLETE AUTOMATION SYSTEMCOMPLETE AUTOMATION SYSTEM Design, integration and manufacture of complete Automation Design, integration and manufacture of complete Automation Control System for Industrial PlantControl System for Industrial Plant
Our product and services portfolio ranges from:Our product and services portfolio ranges from:
Control PanelControl Panel for safe and hazardous area for safe and hazardous area (EEx-p type suitable for Group I and Group II zones)(EEx-p type suitable for Group I and Group II zones)
toto•PLCPLC (Programmable Logic Controllers)(Programmable Logic Controllers) Software DevelopmentSoftware Development•Small DCSSmall DCS ((Distributed Control Systems)Distributed Control Systems) Software DevelopmentSoftware Development•Host Computer Host Computer (DCS) (DCS) Software Interfacing DevelopmentSoftware Interfacing Development•HMI HMI && SCADA SCADA Supervision System Supervision System Software DevelopmentSoftware Development•Electrical Engineering ActivitiesElectrical Engineering Activities•Instrumental Engineering ActivitiesInstrumental Engineering Activities•Control System EngineeringControl System Engineering
CEAR offer you a complete set of Industrial IT automation CEAR offer you a complete set of Industrial IT automation solutions to meet your entire plant automation needs (solutions to meet your entire plant automation needs (Oil & Oil & gas, Petrochemical, Chemical, Refining, Power Plant, gas, Petrochemical, Chemical, Refining, Power Plant, Pharmaceutical and Food Industries).Pharmaceutical and Food Industries).
CEAR provides Customer-tailored solution to span the full CEAR provides Customer-tailored solution to span the full breadth of software, hardware and service needs including:breadth of software, hardware and service needs including:Study, Design and Manufacture, F.A.T. Activities, Software Study, Design and Manufacture, F.A.T. Activities, Software Development, Engineering, Installation, Commissioning, Start-Development, Engineering, Installation, Commissioning, Start-up, Training and After Sale Assistance and Service.up, Training and After Sale Assistance and Service.
ACTIVITIESACTIVITIES
ENGINEERINGENGINEERING
Electrical EngineeringElectrical Engineering
Instrumental EngineeringInstrumental Engineering
Control System EngineeringControl System Engineering
CONTAINERISED SUBSTATION CONTAINERISED SUBSTATION for OUTDOOR INSTALLATION CTE SERIESfor OUTDOOR INSTALLATION CTE SERIES
MAIN TECHNICAL DATA
Rated Medium Voltage kV 12-24-36
Rated Low Voltage V On request
Highest capacity transformer
kVA 4500
Enclosure IP 549
Operating Temperature °C -20 ÷ 50
Standard EN 61330 EN 60529EN 60439-4
IEC 6909IEC60864
The The CTECTE series Medium Voltage heavy- series Medium Voltage heavy-duty substation for outdoor installation duty substation for outdoor installation is a free standing, containerised unit, is a free standing, containerised unit,
specifically designed for job site specifically designed for job site electrification.electrification.
It is completely self contained and is It is completely self contained and is
easily movable. It can be lifted with easily movable. It can be lifted with the transformer fitted.the transformer fitted.
The substation is provided with M.V. The substation is provided with M.V. switchboard, transformer and L.V. switchboard, transformer and L.V.
switchboards, designed to suit switchboards, designed to suit customer requirements.customer requirements.
SIZE
STANDARD ISO
HEAVY DUTY AND COMPACT SUBSTATION CTS SERIESHEAVY DUTY AND COMPACT SUBSTATION CTS SERIES
SIZE & POWER RATE
SIZE 1 3500 x 2000 x 1100 mm 100÷150 kVA
SIZE 2 3700 x 2000 x 1100 mm 315÷630 kVA
SIZE 3 3900 x 2000 x 1100 mm 800÷1000kVA
SIZE 4 4100 x 2000 x 1100 mm 1250kVA
SIZE 5 4800 x 2000 x 1100 mm 1600kVA
Compact Compact CTSCTS series, Medium Voltage series, Medium Voltage Electrical Substation, is a reinforced Electrical Substation, is a reinforced
unit that can be installed in particularly unit that can be installed in particularly critical conditions of use with little critical conditions of use with little
available space.available space.
The The CTSCTS Compact Substation is provided Compact Substation is provided with M.V. unit, transformer and L.V. with M.V. unit, transformer and L.V.
unit, designed to suit customer unit, designed to suit customer requirements.requirements.
Extremely robust and resistant to heavy Extremely robust and resistant to heavy mechanical stress, CTS substation can mechanical stress, CTS substation can
operate in extreme environmental operate in extreme environmental conditions.conditions.
MAIN TECHNICAL DATA
Rated Medium Voltage kV 12-17,5- 24
Rated Low Voltage V On request
Highest capacity transformer kVA Up to 1600
Enclosure IP 549
Operating Temperature °C -20 ÷ 50
Standard EN 61330 EN 60529EN 60439-4
IEC 6909IEC 60864
EEX-p CONTAINERISEDEEX-p CONTAINERISED SUBSTATIONSUBSTATION
for HAZARDOUS AREA OVP SERIESfor HAZARDOUS AREA OVP SERIES
The The OVPOVP series pressurized free substation series pressurized free substation is a free standing containerised unit, is a free standing containerised unit,
specially designed for industrial sites in specially designed for industrial sites in hazardous area.hazardous area.
A pressurized substation is defined as A pressurized substation is defined as "having an internal overpressure "having an internal overpressure
housing EEx-p”, suitable for Group I and housing EEx-p”, suitable for Group I and Group II zones.Group II zones.
It’s completely self contained and thanks It’s completely self contained and thanks to it’s strong structure it can operate in to it’s strong structure it can operate in
very hard environmental conditions.very hard environmental conditions.
SIZE
STANDARD ISO
MAIN TECHNICAL DATA
Rated Medium Voltage kV 12-24-36
Rated Low Voltage V On request
Highest capacity transformer (Pressurized cooling system)
kVA Up to 800kVA
Highest capacity transformer (Special cooling system)
kVA 2500kVA
Enclosure IP 549
Operating Temperature °C -20 ÷ 40
Standard EN 50014 EN 50016EN 50020 EN 50039
IEC60079-0 IEC60079-2IEC60079-11 IEC60079-25
ATAX
ELECLAD MEDIUM VOLTAGE SWITCHGEARELECLAD MEDIUM VOLTAGE SWITCHGEAR
DIMENSION
Width 600 ÷ 1000 mm
Height 2160 ÷ 2600 mm
Dept 1550 ÷ 2300 mm
ELECLADELECLAD is Medium Voltage Metal-Clad Arc is Medium Voltage Metal-Clad Arc Proof Switchgear suitable for indoor Proof Switchgear suitable for indoor
application.application.
It’s a modular switchgear composed by It’s a modular switchgear composed by standardised unit line up.standardised unit line up.
Each unit consist in three Power compartmentsEach unit consist in three Power compartments(bus bar, feeder, circuit breaker) and(bus bar, feeder, circuit breaker) and
three Auxiliary compartmentsthree Auxiliary compartments(Instrument, auxiliary and voltage transformer)(Instrument, auxiliary and voltage transformer)
The The ELECLADELECLAD switchboards are used in primary switchboards are used in primary Medium Voltage power distribution.Medium Voltage power distribution.
MAIN TECHNICAL DATA
Rated Voltage kV 12 ÷ 24
Impulse withstand voltage kV 75 – 95 – 125
Rated frequency Hz 50 – 60
Rated bus bar current A 400 ÷ 630
Rated short time withstand current
kA 12,5 ÷ 25
Enclosure IP 4X
Operating Temperature °C + 5 ÷ 45
Standard IEC 62271-200 CE
ELECAB MEDIUM VOLTAGE SWITCHGEARELECAB MEDIUM VOLTAGE SWITCHGEAR
MAIN TECHNICAL DATA
Rated Voltage kV 12 – 24 36
Rated lightening impulsewithstand voltage
kV 75 -125 170
Rated frequency Hz 50 - 60
Rated bus bar current A 630 800
Rated short time withstand current
kA 25 16
Enclosure IP 3X
Operating Temperature ° C + 5 ÷ 45
Standard IEC 62271-200 CE
The The ELECABELECAB series Medium Voltage Metal series Medium Voltage Metal Enclosed Switchgear are composed by Enclosed Switchgear are composed by
prefabricated air insulated metal prefabricated air insulated metal frames, provided with:frames, provided with:
on load or no load switch disconnector, on load or no load switch disconnector, automatic circuit breakerautomatic circuit breaker
(Air, Vacuum or SF6 insulated) and (Air, Vacuum or SF6 insulated) and measure devices.measure devices.
The The ELECABELECAB switchboards are used in switchboards are used in secondary Medium Voltage power secondary Medium Voltage power
distribution. distribution.
DIMENSION 12-24kV
Width 350 ÷ 750 mm
Height 1950 mm
Dept 1150 mm
DIMENSION 36kV
Width 700 ÷ 1100 mm
Height 2250 mm
Dept 1350 mm
QDP LOW VOLTAGE POWER CENTERQDP LOW VOLTAGE POWER CENTER
DIMENSION
Width 300 ÷1250 mm with 50mm increases
Height 2250 mm
Dept 800 ÷2000 mm
The The QDP QDP Power Center series is Low Power Center series is Low Voltage SwitchgearVoltage Switchgear
It’s a modular construction, variable It’s a modular construction, variable shapes that can fulfil a wide variety shapes that can fulfil a wide variety
of technical needs for electrical of technical needs for electrical plants where high currents plants where high currents
distribution systems is required.distribution systems is required.
In order to reach maximum personnel In order to reach maximum personnel safety, service continuity, easy safety, service continuity, easy
inspection and maintenance, inspection and maintenance, QDPQDP series cover the following series cover the following
requirements:requirements: Protective covers and metallic divider between Protective covers and metallic divider between
each single compartment and switch celleach single compartment and switch cell Internal metallic dividers between the front area Internal metallic dividers between the front area
(containing the switches) and the rear area (containing the switches) and the rear area (containing the copper bars and power cables)(containing the copper bars and power cables)
MAIN TECHNICAL DATA
Rated Voltage V 690
Rated frequency Hz 50 - 60
Rated short timewithstand current (1s)
kA 50 – 75 – 100
Shape FORM
1 up to 4
Enclosure IP 30/20 ÷ 54
Operating Temperature °C -10 ÷ 45
Standard EN 60439-1 IEC 60439-1
CE
QCM LOW VOLTAGE MOTOR CONTROL CENTERQCM LOW VOLTAGE MOTOR CONTROL CENTER
The The Motor Control Center Motor Control Center QCMQCM series is an Electric series is an Electric Switchgear for centralized protection, operating Switchgear for centralized protection, operating
and motor’s control.and motor’s control.
The Motor Control Center consists in different The Motor Control Center consists in different compartments divided into several sections, compartments divided into several sections, which contain fixed or drawable drawers with which contain fixed or drawable drawers with
relevant equipment for each motor or electrical relevant equipment for each motor or electrical load.load.
MAIN TECHNICAL DATA
Rated Voltage V 690
Rated impulse withstand voltage kV 8 - 12
Rated frequency Hz 50 - 60
Rated short time withstand current (1s) kA up to 65
Highest rated current A 2500
Shape FORM 1 up to 4
Enclosure IP 41/20 ÷ 55
Operating Temperature °C -10 ÷ 45
Standard EN 60439-1 IEC 60439-1CE
OUR MAIN CLIENTSOUR MAIN CLIENTS
• chemical and petrochemicalchemical and petrochemical
• oil & gasoil & gas
• pharmaceuticalpharmaceutical
• big worksbig works
• manufacturer industries (food, manufacturer industries (food, iron & steel, glass, concrete iron & steel, glass, concrete production plant..etc.)production plant..etc.)
• Energy plantsEnergy plants
• EcologyEcology
Industrial companies, EPC contractor and commitments on:Industrial companies, EPC contractor and commitments on:
Some of our realizations:Some of our realizations:
CEAR CEAR products and services portfolio covers products and services portfolio covers a wide range of a wide range of requirements from the electricity delivery point (up to 33 kV) to the requirements from the electricity delivery point (up to 33 kV) to the most remote electrical and instrumental control point of any industrial most remote electrical and instrumental control point of any industrial process plant.process plant.
CEAR can perform all required turn-key job operations, starting from CEAR can perform all required turn-key job operations, starting from the analysis of Customer needs and specifications through all design the analysis of Customer needs and specifications through all design and manufacturing steps, commissioning, start-up and training, up to and manufacturing steps, commissioning, start-up and training, up to after sale service and supportafter sale service and support..
A well organized and efficient technical structure, a highly skilled A well organized and efficient technical structure, a highly skilled staff of technicians, up-dated design tools and manufacturing staff of technicians, up-dated design tools and manufacturing facilities, allows CEAR to guarantee top quality products fully facilities, allows CEAR to guarantee top quality products fully complying with standard UNI EN ISO 9001:2008 (ISO 9001:2008).complying with standard UNI EN ISO 9001:2008 (ISO 9001:2008).
CEAR is therefore the ideal partner for Company that require quality, CEAR is therefore the ideal partner for Company that require quality, rapidity, competitiveness and flexibility in turn-key supplies.rapidity, competitiveness and flexibility in turn-key supplies.
CONCLUSIONSCONCLUSIONS