Compresoare cu piston Seria EUROCOMP -...
Transcript of Compresoare cu piston Seria EUROCOMP -...
www.kaeser.com
Compresoare cu pistonSeria EUROCOMPDebit de aer livrat de la 112 la 1050 l/min – Presiune 10 şi 15 bar
Blocuri de compresie de calitate de la KAESER – produse în Germania
Fabricate din cele mai bune materiale şi supuse unei inspecţii riguroase, componentele blocurilor de compresie Eurocomp sunt meticulos prelucrate şi atent asamblate. Pierderile prin transmisie sunt realmente eliminate, motorul electric durabil fiind cuplat direct la blocul de compresie.
Răcire cu eficienţă ridicată
Temperatura uleiului şi a aerului comprimat sunt menţinute la minim datorită unui ventilator generos dimensionat şi a lamelelor de răcire. Acest sistem eficient de răcire prelungeşte semnificativ durata de viaţă a compresorului şi a sculelor pneumatice aferente.
Supape rezistente la coroziune
Compresoarele Eurocomp au supape de tip lamelar din oţel inoxidabil şi sunt prevăzute cu limitatoare de cursă care previn depunerile de carbon, asigurând etanşeitatea supapelor şi o durată extinsă de viaţă.
Calitate: Produs în Germania
Toate componentele compresoarelor Eurocomp de la KAESER, precum blocul de compresie şi motorul electric, sunt produse la cele mai înalte standarde germane de proiectare şi fabricare. Ca urmare, utilizatorii compresoarelor Eurocomp beneficiază de performanţa ridicată şi durata de viaţă considerabil extinsă a acestor compresoare. Compresoarele Eurocomp de la KAESER sunt proiectate să asigure mulţi ani de serviciu ireproşabil şi să asigure o sursă fiabilă de aer comprimat de calitate.
Ce aşteptaţi de la compresorul dumneavoastră?
Rezultate de calitate pot fi obţinute doar prin utilizarea instrumentelor şi echipamentelor de calitate. Prin urmare, o sursă sigură de aer comprimat, livrată de un compresor de înaltă performanţă, este esenţială pentru majoritatea aplicaţiilor. Compresoarele staţionare cu piston din seria EUROCOMP de la KAESER sunt folosite cu succes în mica şi marea industrie de ani de zile. Posibilitatea alegerii între un recipient de aer orizontal şi unul vertical permite acestor compresoare extrem de flexibile să fie instalate în orice loc.
Avantajele compresoarelor Eurocomp de la KAESER includ:
• Produs în Germania: Blocurile de compresie de calitate de la KAESER, fiind fabricate din cele mai bune materiale, asigură un randament maxim şi o durată de viaţă remarcabilă. • Aer comprimat rece graţie unui răcitor final eficient din aluminiu, care are şi rol de protecţie a ventilatorului. • Transmisie fără întreţinere datorită cuplajului direct dintre motorul de antrenare şi blocul de compresie. • Tampoanele antivibraţie duble, prevăzute la modelul standard, asigură un nivel minim de zgomot şi previn transmiterea vibraţiilor în podea. • O carcasă insonorizantă opţională reduce nivelul de zgomot cu până la 10 dB(A), şi poate fi livrată gata montată sau separat. Oferind performanţe şi fiabilitate de excepţie, compresoarele EUROCOMP de la KAESER asigură o sursă de aer comprimat de calitate pe care puteţi conta.
Budget Compressors
Performanţe optime
Presiune în bar
Efic
ienţ
ă în
%
EUROCOMP – Calitate şi performanţă
KAESER Quality
Tampoane anti-vibraţie
LOW VIBRATION
LOW NOISE
Recipient de aer – până la
350 l cu acoperire la interior
340 440 660 840 1100 1500 150 230 420 550 750 1000230 300 440 590 770 1050 – – –215 280 410 544 715 975 116 192 344 460 620 836
– – – – 112 118 336 450 610 82090 90 250 90 250 500 90 250 500
1,7 2,4 3 4 5,5 7,5 1,1 1,7 3 4 5,5 7,5– – – – 1,25 – – –
1 2 2 2 2 2 2 264 64 76 78 80 80 69 69 76 78 80 80
1120 1150 1540 1150 1590 2050 1200 1140 1540 1590 2040350 500 570 590 600 690 800 460 440 570 600 680 720910 870 950 1130 960 1140 1300 1330 870 1190 1220 1330 134073 89 95 166 100 165 235 245 80 90 175 180 280 285
56 56 67 68 70 72 – 61 67 68 70 721150 1150 1540 1150 1590 2050 – 1170 1630 1710 2050470 610 610 730 – 470 610 730
1000 1010 1080 1250 1080 1250 1410 1400 – 1000 1240 1260 1410123 125 155 230 160 230 345 352 – 130 245 247 444 447
440 660 840 230 420 550 750 1000300 440 590 – – –280 410 544 192 344 460 620 836
– 188 336 450 610 820250 250 250 350 500
2,4 3 4 1,7 3 4 5,5 7,52 2 2 2
64 76 78 76 78 80 80730 710 730 710 710 740 940640 640 640 670 730 910
1720 1810 1820 1720 1890 1920 1990 2060 2080125 150 156 150 175 177 190 325
56 67 68 66 67 68 68 70 72810 920 810 920 920 1090470 640 640 640 730 920
1900 1970 1900 1970 2040 2140160 230 235 200 250 258 313 395 400
Aer comprimat de calitate pentru mica şi marea industrie
90 l 150 l 250 l
● Construcţie cu economie de spaţiu cu recipient de aer vertical ● Funcţionarea cu turaţii scăzute reduce nivelul de zgomot şi creşte durata de viaţă ● Carcase de insonorizare disponibile gata montate sau separat
1) Debit efectiv livrat măsurat conform standardului VDMA 4362 – 2) Tensiune de alimentare: 400 V, 3 ~, 50 Hz; 230 V, 1 ~, 50 Hz – 3) Măsurare în câmp liber conform DIN 45635 la 1 m distanţă – 4) Versiune portabilă – *) Cu omologare de tip – nu este necesară certificare oficială
1) Debit efectiv livrat măsurat conform standardului VDMA 4362 – 2) Tensiune de alimentare: 400 V, 3 ~, 50 Hz – 3) Măsurare în câmp liber conform DIN 45635 la 1 m distanţă
EUROCOMP – versiune cu recipient de aer orizontal fără carcasă insonorizantă
O treaptă, 10 bar Două trepte, 15 barEPC
340-100 *)
EPC440-100
*)
EPC630-100
*)
EPC630-250
EPC840-100
*)
EPC840-250
EPC1100- 500
EPC1500- 500
EPC 150-2- 100-F 4)
EPC 230-2-
100
EPC 420-2-
250
EPC 550-2-
250
EPC 750-2-
500
EPC 1000-2-
500
Debit aspirat Debit efectiv livrat 1) la 6 bar l/min Debit efectiv livrat 1) la 8 bar l/min Debit efectiv livrat 1) la 12 bar l/min Volum recipient Putere motor 2) 400 V kW Putere motor 2) 230 V kW Număr de cilindrii Nivel de zgomot 3) dB(A) Lungime mm Lăţime mm Înălţime mm Masă netă kg EUROCOMP – versiune cu recipient de aer orizontal cu carcasă insonorizantă
Nivel de zgomot 3) dB(A) Lungime mm Lăţime mm Înălţime mm Masă netă kg
Două trepte, 15 bar
O treaptă, 10 bar, de la EPC 440-100
EUROCOMP – versiune cu recipient de aer vertical fără carcasă insonorizantă
O treaptă, 10 bar Două trepte, 15 barEPC
440-250EPC
630-250EPC
840-250EPC
230-2-250EPC
420-2-250EPC
550-2-250EPC
550-2-350EPC
750-2-500EPC
1000-2-500
Debit aspirat Debit efectiv livrat 1) la 6 bar l/min Debit efectiv livrat 1) la 8 bar l/min Debit efectiv livrat 1) la 12 bar l/min Volum recipient Putere motor 2) 400 V kW Număr de cilindrii Nivel de zgomot 3) dB(A) Lungime mm Lăţime mm Înălţime mm Masă netă kg EUROCOMP – versiune cu recipient de aer vertical cu carcasă insonorizantă
Nivel de zgomot3) dB(A) Lungime mm Lăţime mm Înălţime mm Masă netă kg
Cu carcasă insonorizantă, de asemenea disponibilă şi separat
O treaptă, 10 bar, de la EPC 440-250 vertical
O treaptă, 10 bar, de la EPC 630-250 vertical
250 l 350 l
Două trepte, 15 bar vertical
Cu carcasă insonorizantă, de asemenea disponibilă şi separat
O treaptă, 10 bar, de la EPC 630-250
● Compact: cuplare directă a motorului de antrenare cu blocul de compresie ● Calitate pe care puteţi conta: bloc de compresie Fabricat în Germania ● Adaptabil: compresorul potrivit pentru fiecare aplicaţie
Recipient de aer – până la
350 l cu acoperire la interior
Recipient de aer – până la
350 l cu acoperire la interior
350 440 660 840 1100 1500 150 230 420 550 750 1000230 300 440 590 770 1050 — — —215 280 410 544 715 975 116 192 344 460 620 836
— — — 112 188 336 450 610 8201,7 2,4 3 4 5,5 7,5 1,1 1,7 3 4 5,5 7,51 2 2 2 2 2 264 64 75 78 79 80 69 69 75 77 79 80
520 640 800 810 510 520 640 800 800330 500 570 590 690 800 430 440 570 600 670 720510 440 540 550 610 650 440 580 610 630 65040 50 70 100 130 40 45 70 95 125 130
• • • • • • • • • • • •
54 54 67 72 70 74 59 59 67 68 70 72810 920 1090 810 920 1090470 610 730 470 610 730640 730 800 640 730 800
95 100 130 240 260 95 100 160 170 265 270
Utilizate într-o gamă largă de aplicaţii, compresoarele Eurocomp asigură utilizatorilor o sursă de aer comprimat de calitate deosebit de fiabilă şi adaptabilă.
Accesorii
Furtun aer comprimat
Furtun flexibil pentru conectare recipient de aer la reţeaua de aer comprimat (lungime furtun 1 m).
Stocare şi tratare aer comprimat
Recipient de aer galvanizat conform reglementării CE-87/404. Setul de fitinguri conţine: Supapă de reţinere, supapă de siguranţă cu omologare de tip, manometru, flanşă de test, robinet sferic. Uscător de aer comprimat cu refrigerare şi economie de energie.
Tablou electric stea-triunghi „Start Control“
Tablou de comandă cu pornire automată stea-triunghi şi protecţie la suprasarcină. Rezistent la praf şi apă conform IP 54. Cu contor de ore funcţionare şi modul KAESER CONTROL de monitorizare (necesar pentru puteri motor de la 5,5 kW).
Purjor electronic de condens pentru instalare separată
Purjor de condens ECO DRAIN cu senzor electronic de nivel. Set complet de instalare pe recipient. Inclusiv toate componentele şi fitingurile necesare asamblării.
Accesorii opţionale (contra cost)
• Carcasă insonorizantă
• Contor ore de funcţionare
• Contact alarmă
• Purjor electronic de condens instalat pe recipientul de aer
• Tampoane antivibraţie de fixare reglabile, sau role de ghidare
• Ulei alimentar, sintetic sau fără silicon
• Cablu de alimentare cu / fără ştecăr
• Monitorizare nivel de ulei cu oprire automată în cazul în care nivelul de ulei este prea scăzut
Unitate compresor pentru instalare separată
1) Debit efectiv livrat măsurat conform standardului VDMA 4362 – 2) Tensiune de alimentare: 400 V, 3 ~, 50 Hz – 3) Măsurare în câmp liber conform DIN 45635 la 1 m distanţă
Echipament standardCompresor
• Bloc de compresie răcit cu aer cu inel de ungere (ungere prin stropire până la 2,4 kW)
• Filtru de intrare aer cu amortizor de zgomot
• Capul de aluminiu al cilindrului şi conductele cu aripioare de răcire asigură disiparea excelentă a căldurii
• Inel răcitor de aluminiu, multi-cameră; asigură şi protecţia ventilatorului (compresoarele de la 3 kW în sus)
• Cu zgomot redus, supape lamelare rezistente
• Buşon de umplere cu ulei şi aerisire, dop de evacuare ulei şi vizor de nivel ulei din sticlă
• Motor cuplat direct cu blocul de compresie
• Compresor, motor şi recipient de aer echipate cu tampoane antivibraţie, racord flexibil între compresor şi recipientul de aer
• Tampoane antivibraţie între recipientul de aer şi podea
Motor
• 4-poli, 1500 rot/min, trifazic 400 V/50 Hz
• carcasă cu clasa de protecţie IP 54, construcţie B 15
• Ventilator axial integrat pentru răcire compresor şi motor
O treaptă, 10 bar
Două trepte, 15 bar
EUROCOMP – Unitate compresor fără carcasă insonorizantă
O treaptă, 10 bar Două trepte, 15 barEPC
340-GEPC
440-GEPC
630-GEPC
840-GEPC
1100-GEPC
1500-GEPC
150-2-GEPC
230-2-GEPC
420-2-GEPC
550-2-GEPC
750-2-GEPC
1000-2-G
Debit aspirat Debit efectiv livrat 1) la 6 bar l/min Debit efectiv livrat 1) la 8 bar l/min Debit efectiv livrat 1) la 12 bar l/min Putere motor 2) 400 V kW Număr de cilindrii Nivel de zgomot 3) dB(A) Lungime mm Lăţime mm Înălţime mm Masă netă kg Set de comandă şi conexiuni inclusiv racord flexibil EUROCOMP – Unitate compresor cu carcasă insonorizantă
Nivel de zgomot3) dB(A) Lungime mm Lăţime mm Înălţime mm Masă netă kg
Cu carcasă insonorizantă De asemenea disponibilă şi separat
● Unitatea compresor şi recipientul pot fi instalate şi separat ● Opţional compresorul poate fi livrat şi cu carcasă insonorizantă (de asemenea disponibilă separat) ● Disponibil cu una sau două trepte de compresie pentru a satisface toate nevoile de aer comprimat
Legendă:ED = ECO DRAIN Purjor de condens cu senzor electronic de nivelFE = Microfiltru Separă aerosolii de ulei şi particulele solide
Exemple: Selecţie clase de tratament conform ISO 8573-1
Alegeţi clasa necesară de tratament conform domeniului aplicaţiei:Tratamentul aerului folosind uscător cu refrigerare (punct de rouă sub presiune +3 °C)
Vopsire cu pistol pulverizator, acoperire cu pulberi
Solide Ulei BacteriiApă
Ambalaje, aer de comandă şi aer instrumental
Fără tratament98 5
Unitate compresor montată pe ramă
CompresorED
ED
ED
41 1 KA
ES
ER
KA
ES
ER
AMCS41 2
ED
Aquamat
Uscător cu refrigerare
Recipient de aer
KA
ES
ER
KAESERK
AE
SE
R
KA
ES
ER
+ Solide – + Apă/ Condens –
+ Ulei –
+ Bacterii –
Impurităţi:
Grad de filtrare:
1) Conform ISO 8573-1:1991 (conţinutul de particule nu este măsurat conform ISO 8573-1:2001, deoarece limitele definite pentru Clasa 1 sunt aplicabile ‘Camerelor Curate’) 2) Conform ISO 8573-1:2001
Particule solide1) Umiditate2) Conţinut total
de ulei 2)
Dimensiune max.
particule
µm
Concentraţie max.
particule
mg/m³
Punct de rouă sub presiune
(x = apă în stare lichidă în g/m³)
mg/m³
0 Consultaţi Kaeser cu privire la tehnologia aerului pur şi a camerei curate
1 0,1 0,1 ≤ - 70 ≤ 0,012 1 1 ≤ - 40 ≤ 0,13 5 5 ≤ - 20 ≤ 14 15 8 ≤ + 3 ≤ 55 40 10 ≤ + 7 –6 – – ≤ + 10 –7 – – x ≤ 0,5 –8 – – 0,5 < x ≤ 5 –9 – – 5 < x ≤ 10 –
Clas
a IS
O 8
573-
1
UR = Uscător cu refrigerare Pentru uscarea aerului comprimat, punct de rouă sub presiune până la +3 °C
Aquamat = Sistem de tratare a condensuluiAMCS = Sistem de umplere a reţelei
KAESER KOMPRESSOREN SRL Bd. Ion Mihalache, Nr. 179 – 011181 Bucureşti – Tel: +40 21 2245681 – Fax: +40 21 2245602www.kaeser.com – e-mail: [email protected]
P-31
4RO
/11
Spec
ificaţ
iile s
e po
t mod
ifica
fără
not
ificar
e pr
eala
bilă
www.kaeser.com
Reciprocating CompressorsAIRBOX / AIRBOX CENTER
Air delivery 0.25 to 0.90 m³/min, Pressure 7 – 10 – 12.5 bar
www.kaeser.com
The innovative AIRBOX and AIRBOX CENTER
The new AIRBOX and AIRBOX CENTER ranges from KAESER are the first reciprocating compressors to feature the advanced SIGMA CONTROL basic compressor controller.
The AIRBOX and all-in-one AIRBOX CENTER – which features an integrated compressed air receiver, refrigeration dryer and optional filters – are delivered ready for immediate operation and include a switch cabinet.
Energy saving motors ensure efficient compressed air production and outstanding performance.
Flexible and efficient
Super-quiet operation
The innovative cooling system provides impressive cooling performance and enables optimum sound-proofing. In fact, AIRBOX and AIRBOX CENTER systems are so quiet that you hardly notice they’re there.
SIGMA CONTROL basic
Using efficient Quadro and Dual control, the electronic ‘Sigma Control basic’ control system guarantees best possible efficiency and reliability. Moreover, AIRBOX and AIRBOX CENTER models can be easily integrated into modern compressed air management systems.
Made in Germany
Using only premium grade materials, KAESER manufactures all of its compressor blocks. Every block is produced, tested and assembled in accordance with the strictest quality control standards to ensure outstanding performance and unrivalled energy efficiency.
KAESER ingenuity for maximum flexibility
Whether simply a compressor, or a complete compressed air supply system with integrated compressed air treatment, the modular design of the AIRBOX and AIRBOX CENTER provides the flexibility to ensure that your exact compressed air needs are met. For example, the AIRBOX can be equipped with a second compressed air aftercooler and the AIRBOX CENTER, when equipped with optional filters (microfilter combination), is able to deliver compressed air of any quality class. All models are EMC certified for domestic electrical supplies, which simplifies installation and reduces provisioning costs. Furthermore, should compressed air demand increase in the future, for example, the SIGMA CONTROL basic can be connected to a compressed air management system to enable control of multiple units.
AIRBOX / AIRBOX CENTERWhat do users expect from a reciprocating compressor?
Answer: They expect maximum efficiency and reliability. This sounds simple, but these advantages are influenced by many different factors:
Energy costs, for example, taken over the lifetime of a compressor, add up to a multiple of investment costs.
Efficient energy consumption therefore plays a vital role in the production of compressed air.
The air system must also deliver the compressed air in the correct volume, at the required quality, and provide exceptional reliability. This is essential to ensure maximum availability of compressed air powered production systems.
Last but not least, a truly efficient compressor is simple to maintain. This is achieved by using high quality components and through logical system design which allows excellent accessibility to all maintenance points.
KAESER reciprocating compressors fulfil all of these needs and provide the basis for highly efficient compressed air production.
Function diagram
(AIRBOX CENTER 400 with optional microfilter combination)
100% duty cycles
Clever air flow design ensures optimal system cooling which, unusually for a reciprocating compressor, allows 100 % duty cycles and dependable operation in ambient temperatures as high as 45 °C (AIRBOX 1500 and AIRBOX CENTER 1500 up to 35 °C).
1
2
3 4
5
6
7
8
Intake filter
Compressor block
Maintenance-free direct drive
Energy saving drive motor
Fan
Internally-coated air receiver
Electronic ECO DRAIN condensate drain
Compressed air refrigeration dryer
Filter (optional)
79
123456789
Maintenance friendly
The less maintenance required, the more cost-effective the system. This is where
the AIRBOX and AIRBOX CENTER really shine: They are oil-free and feature a
maintenance- and loss-free 1:1 direct drive system. The air and intake filter are easily
accessible once the generously-sized enclosure panels are removed.
AIRBOX / AIRBOX CENTER –
AIRBOX CENTER – With filter
With an air intake filter, oil-free compression and an integrated refrigeration dryer, the AIRBOX CENTER is ready to deliver exceptional quality compressed air as soon as its delivered. For applications requiring maximum compressed air quality, all AIRBOX CENTER models can be equipped with optional mounted filters. This enables efficient compressed air delivery at precisely the required quality.
AIRBOX CENTER: The all-in-one compact solution
Featuring an integrated compressed air dryer and receiver, the AIRBOX CENTER is all-in-one compressed air supply system. After compression, the air passes into an internally coated air receiver where it gives up much of its condensate and then enters the integrated refrigeration dryer which dries the compressed air to a pressure dew point of +5 °C.
Impressive soundproofing
With 40mm thick soundproofing, multi-deflected cooling air flow, acoustically
separate compressor block, application-specific intake air ducting and highly
effective air intake sound damping, the AIRBOX and AIRBOX CENTER continue
the Kaeser tradition of super-quiet performance.
AIRBOX – The compressor
The AIRBOX epitomises the concept of ‘ready-to-go’ compressed air. Each model features a turnkey compressor with advanced SIGMA CONTROL basic controller and star-delta starter integrated within a single enclosure. Furthermore, the soundproofed enclosure enables these versatile units to be installed directly within the working environment without the need for additional sound protection measures.
Premium efficiency motor
Premium quality motors ensure both outstanding performance and efficiency. They also operate with significantly lower temperatures compared to conventional
motors, consequently providing enhanced reliability and service life.
Cool runners
With independent cooling fans for both the drive motor and compressor block and precisely tailored cooling air ducting, Kaeser‘s unique cooling system allows – unusually for reciprocating compressors – 100% duty cycles and dependable operation in ambient temperatures as high as 45°C (AIRBOX/AIRBOX CENTER 1500 up to +35°C). The switch cabinet also features its own ventilation and is connected to the overall cooling air flow to prevent overheating.
Tailored control
Best possible efficiency and reliability are guaranteed by the electronic
“SIGMA CONTROL basic” control system. This advanced controller also optionally
allows connection to compressed air management systems such as Kaeser’s
SIGMA AIR MANAGER.
Standard version AIRBOX 550
The perfect choice
AIRBOX 400 10 0.25 100 2.2 58
G 1/2 1220 x 730 x 1160
240
AIRBOX 550 10 0.32 100 3.0 61 255
AIRBOX 840 10 0.50 100 4.0 65
G 3/4 1430 x 820 x 1320
325
AIRBOX 1500 7 0.90 100 7.5 66 385
AIRBOX 1000-2 12.5 0.71 100 7.5 66 385
AIRBOX CENTER 400 10 0.25 100 2.2 59 +5
200 G 1/21490 x 730 x
1500
360
AIRBOX CENTER 550 10 0.32 100 3.0 61 +5 370
AIRBOX CENTER 840 10 0.50 100 4.0 65 +5
270 G 3/41730 x 820 x
1640
490
AIRBOX CENTER 1500 7 0.90 100 7.5 66 +5 550
AIRBOX CENTER 1000-2 12.5 0.71 100 7.5 66 +5 550
1
2
3
Dimensions
AIRBOX systemsExample: AIRBOX 550
Drive
Maintenance- and loss-free 1:1 direct drive.
Cooling
Air-cooled, two fans, compressed air aftercooler.
Electrical components
IP 54 control cabinet containing automatic star-delta starter, motor overload protection, control transformer, EMC certified for domestic electrical supply systems.
SIGMA CONTROLComplete unit
Ready for operation, fully automatic, super silenced, vibration damped, all panels powder coated.
Sound insulation
Lined with washable foam, anti-vibration mounts, double vibration damped.
Compressor block
Dry-running, 2 cylinder, single or two stage.
Electric motor
German made premium efficiency (EFF1) electric motor, IP 54 and insulation class F for additional reserve.
Professional planningCompressed air supply system with separate components
Only properly designed air systems can meet the demands for air quality, availability and efficiency that are placed on a modern compressed air supply.
Therefore, benefit from decades of compressed air engineering experience and let KAESER design your compressed air supply system.
AIRBOX
Refrigeration dryer
Air receiver
Filter
ECO DRAIN condensate drain
Air-main charging system
SIGMA AIR MANAGER basic
AIRBOX CENTERExample: AIRBOX CENTER 400
AIRBOX CENTER
Air-main charging system
Filter
Compressed air system with AIRBOX CENTER
1
6
25
7
3
12
3
Equipment
View from right
730
Rear view
1500
Front view 3-D view
3-D viewFront view
1160
Rear view
730
View from left
1220
View from right
1490
View from left
1
4
Technical specifications – AIRBOX / AIRBOX CENTERAIRBOX
AIRBOX CENTER
Model Maximum pressure
bar
Air delivery at 8 bar *m³/min
Maximum duty cycle **
%
Rated motor power
kW
Sound pressure level *** dB (A)
Air connection
Dimensions W x D x H
mm
Weight kg
Model Maximum pressure
bar
Air delivery at 8 bar *m³/min
Maximum duty cycle **
%
Rated motor power
kW
Sound pressure level *** dB (A)
Pressure dew point
°C
Receiver volume
l
Air connection
Dimensions W x D x H
mm
Weight kg
*) Effective air delivery, measured as per VDMA standard sheet 4362 **) Duty cycle: The proportion of time under load over the total duration of a work cycle ***) Sound pressure level as per ISO 2151 and basic norm ISO 9614-2, tolerance: ± 3 dB(A)
• Quick and simple operation with clear icons and large display
• Fully automatic Quadro or Dual compressor control
• Monitoring of network pressure, block discharge temperature, drive motor and, if applicable, refrigeration compressor
• Remote on/off
• Display of dryer inlet temperature
• Hours counter for service, on-load hours and compressor operation
• Adjustable service intervals, selectable pressure and temperature units (bar/ psi/ MPa, °C/°F)
• Nominal system pressure can be adjusted separately
• Adjustable switching range
• “Group alarm” floating contact
• Electronic pressure transducer
Optional: Connection to compressed air management systems e.g. SIGMA AIR MANAGER (basic)
1
2
3
4
5
6
7
Explanation
ED ECO DRAIN
FE / FF Microfi lter
FG Activated carbon fi lter
FFG Activated carbon and microfi lter combination
FST Sterile fi lters
RD Refrigeration dryer
Aquamat Aquamat
AMCS Air-main charging system
Solid particles/dust
Classmax. particle count per m³ of a particle size
with d [µm]*
0.1 ≤ d ≤ 0.5 0.5 ≤ d ≤ 1.0 1.0 ≤ d ≤ 5.0
0 e.g. Consult KAESER regardingpure air and cleanroom technology
1 ≤ 20.000 ≤ 400 ≤ 102 ≤ 400.000 ≤ 6.000 ≤ 1003 Not defi ned ≤ 90.000 ≤ 1.0004 Not defi ned Not defi ned ≤ 10.0005 Not defi ned Not defi ned ≤ 100.000
Class Particle concentration Cp[mg/m³]*
6 0 < Cp ≤ 57 5 < Cp ≤ 10X Cp > 10
Water
Class Pressure dew point [°C]
0 e.g. Consult KAESER regardingpure air and cleanroom technology
1 ≤ – 70 °C2 ≤ – 40 °C3 ≤ – 20 °C4 ≤ + 3 °C5 ≤ + 7 °C6 ≤ + 10 °C
Class Concentration of liquid water CW[mg/m³]*
7 CW ≤ 0.58 0.5 < CW ≤ 59 5 < CW ≤ 10X CW ≤ 10
Oil
Class Total oil concentration(fl uid, aerosol + gaseous) [mg/m³]*
0 e.g. Consult KAESER regardingpure air and cleanroom technology
1 ≤ 0.012 ≤ 0.13 ≤ 1.04 ≤ 5.0X > 5.0
Compressed air quality classes to ISO 8573-1(2010):
*) At reference conditions 20°C, 1 bar(a), 0% humidity
Application examples: Selection of treatment classes to ISO 8573-1
Choose the required grade of treatment according to your field of application:Air treatment using a refrigeration dryer (pressure dew point +3°C)
Air treatment using a refrigeration dryer (pressure dew point +5°C)
Paint spraying, powder coating
Packaging, control and instrument air
Untreated
Weaving machines, photo labs
Pharmaceutical industry
41 1 AMCS FF
KA
ES
ER
Condensate
41 2 AMCS FE
KA
ES
ER
Condensate
98 5
41 1 AMCS KA
ES
ER
FFG KA
ES
ER
Condensate
41 1FST
KA
ES
ER
AIRBOXED
RD
Airreceiver
KA
ES
ER
KA
ES
ER
Solids Water Oil Bacteria
General works air, high-gradesand blasting
Weaving machines, photo labs
Pharmaceutical industry
Paint spraying, powder coating
Packaging, control and instrument air
42 3 AMCS
EDCondensate
41 1 AMCS KA
ES
ER
FFG KA
ES
ER
Condensate
41 1FST
KA
ES
ER
AIRBOX CENTER
41 1 AMCS FF KA
ES
ER
Condensate
41 2 AMCS FE KA
ES
ER
Condensate
Solids Water Oil Bacteria
P-33
7ED.
1/11
Spe
cifica
tions
are
sub
ject
to c
hang
e wi
thou
t not
ice
KAESER KOmpRESSOREN GmBH P.O. Box 2143 – 96410 Coburg – GERMANY – Tel +49 9561 640-0 – Fax +49 9561 640130www.kaeser.com – e-mail: [email protected]
www.kaeser.com
www.kaeser.com
Seria CLASSIC a compresoarelor pentru atelierDebit aspirat: 210 ÷ 460 l/min – Presiune: 10 bar
Compresoarele CLASSIC
Asamblare meticuloasă
Atenţia din perioada de fabricaţie a blocului de compresie este de-asemenea acordată şi în fiecare etapă a asamblării compresorului.
Bloc KAESER
Blocul de compresie este inima compresorului şi este produs de KAESER în Germania la fabrica din Coburg. Toate compresoarele „CLASSIC” de la KAESER sunt dotate cu pistoane, segmenţi, bielele, rulmenţi şi manivele deosebit de durabile, pentru a asigura o durată lungă de viaţă şi performanţe de excepţie.
Supape din oţel inoxidabil
Supapele lamelare din oţel inoxidabil sunt prevăzute cu limitatoare de cursă cu disipare de căldură pentru a asigura etanşeitatea supapelor şi o durată lungă de viaţă.
Fluid de ungere rezistent la temperatură
Fiecare compresor Kaeser pentru atelier este umplut cu fluid special, rezistent la temperaturi ridicate, care elimină aproape complet depunerile de pe supape. În plus, fluidul permite dublarea duratei unui schimb la aproximativ 1000 ore de funcţionare (sau 2 ani).
Prelucrare de precizie
Utilizând cele mai noi tehnologii de producţie şi cu peste 80 de ani de experienţă în prelucrarea de precizie, competenţa şi cercetarea continuă de la KAESER garantează produse de cea mai înaltă calitate.
Ce aşteptaţi de la compresorul dumneavoastră CLASSIC?
Rezultate de calitate pot fi obţinute doar prin utilizarea instrumentelor şi echipamentelor de calitate. Prin urmare, o sursă sigură de aer comprimat, livrată de un compresor de înaltă performanţă, este esenţială pentru majoritatea aplicaţiilor. Compresoarele KAESER din seria „CLASSIC” sunt proiectate şi executate în conformitate cu cele mai stricte standarde, având totuşi un preţ corespunzător cu cerinţele unei afaceri mici sau de început, fără a face compromisuri în ceea ce priveşte eficienţa, fiabilitatea şi durabilitatea.
Compresoarele CLASSIC de la KAESER
Gama largă de compresoare „CLASSIC” de la KAESER asigură existenţa unui model potrivit pentru orice nevoie. Construite cu grijă folosind cele mai bune materiale, fiecare unitate asigurând durată lungă de viaţă, eficienţă şi fiabilitate. Calitatea deosebită, designul robust şi intervalele mari de întreţinere (este necesară schimbarea uleiului doar o dată la doi ani) fac din seria „CLASSIC” de compresoare KAESER alegerea ideală pentru utilizarea zilnică.
Simbol al calităţii şi tehnologiei moderne
Fabricat în Germania – compresoarele cu piston seria CLASSIC de la KAESER asigură calitate şi performanţă de excepţie. Simbolurile LwA şi CE garantează că toate compresoarele sunt conforme cu cerinţele legale. Toate compresoarele CLASSIC au omologare de tip.
Compresoarele CLASSIC – Calitate şi valoare fără egal
Componente standardizate şi o concentrare pe modele cu tradiţie asigură compresoarelor „CLASSIC” de la KAESER calitate, valoare şi performanţe deosebite.
Fiecare model „CLASSIC” este echipat cu un bloc de compresie superior de la KAESER care garantează fiabilitate maximă şi durată lungă de viaţă.
De fapt întregul compresor este construit pentru durabilitate maximă – fiecare compresor „CLASSIC” fiind prelucrat, asamblat şi testat în fabrica de compresoare cu piston de la KAESER din Coburg, Germania.
6
6
6
6
6
6
9
9
210 140 10 10 1.5 1 67 420 x 370 x 650 29
210 140 2550 10 1.5 1 69
71610 x 310 x 670820 x 400 x 750
3139
270 175 2550 10 1.5 1 71
70610 x 310 x 670820 x 400 x 750
3439
320 205 25 10 1.5 1 71 610 x 310 x 700610 x 310 x 690
3440
320 205 50 10 1.5 1 73 820 x 400 x 770810 x 400 x 770
4143
320 205 90 10 1.5 1 73 1080 x 440 x 850 6253
460 320 50 10 2.2 1 69 820 x 410 x 860820 x 400 x 850
6459
460 320 90 10 2.2 1 70 1170 x 440 x 9201170 x 440 x 910
7068
–
–
–
CLASSIC 320/90 W CLASSIC 320/90 D CLASSIC 460/90 W CLASSIC 460/90 D
Teste riguroase în conformitate cu sistemul Kaeser de QM
Cilindrii de înaltă calitate asigură durată lungă de viaţă
Chei cu impact pentru schimbare rapidă a roţilor
Vopsire impecabilă de fiecare dată
Înainte de livrare, fiecare compresor este supus unor teste riguroase şi este strict inspectat în conformitate cu Sistemul Kaeser de QM - Management al Calităţii (stânga sus). Precizia finisării mecanice a peretelui interior al cilindrului asigură evitarea apariţiei uzurilor semnificative după prima pornire a echipamentului (dreapta sus). Compresoarele „CLASSIC“ de la KAESER sunt extrem de adaptabile: De exemplu, acestea oferă soluţia perfectă pentru renovări, aplicaţii din construcţii şi reparaţii auto (mai jos).
CLASSIC
CLASSIC 210/25 W CLASSIC 270/25 W CLASSIC 320/25 W
CLASSIC 210/50 W CLASSIC 270/50 W CLASSIC 320/50 W CLASSIC 320/50 D CLASSIC 460/50 W CLASSIC 460/50 D
CLASSIC mini 210/10 W
CLASSIC mini 210/10 W ÷ CLASSIC 460/90 D
1) Corespunzător umplerii recipientului de la 3 la 6 bar la temperatura de lucru; 2) Nivel de presiune sonoră măsurat conform: ISO 3744, r= 4 m
Specificaţii tehnice – Seria CLASSICModel Debit
aspirat
l/min
Debit de umplere 1)
l/min
Volum recipient
l
Presiune max.
bar
Putere motor:
kW
Număr de cilindrii
Nivel presiune
acustică 2)dB(A)
Dimensiunil x L x H
mm
Masă netă kg
Classic mini 210/10 W Classic 210/25 W Classic 210/50 W Classic 270/25 W Classic 270/50 W Classic 320/25 W Classic 320/25 D Classic 320/50 W Classic 320/50 D Classic 320/90 W Classic 320/90 D Classic 460/50 W Classic 460/50 D Classic 460/90 W Classic 460/90 D
● Recomandat ○ Utilizare pe termen scurt – Nu este posibil
Scule şi accesorii recomandateConexiune
furtun
mm
Alimentare electrică
(50Hz)V
230V c.a.
230V c.a.
230V c.a.
230V c.a.400V 3~
230V c.a.400V 3~
230V c.a.400V 3~
230V c.a.400V 3~
230V c.a.400V 3~
Set EcoPistol de vopsit, pistol de gresare,
pistol de umflat cauciucuri, pistol de suflat şi furtun
Cheie cu impact Ciocan pneumatic pentru dăltuit
– Compresoare de atelier
Scule şi accesorii
Optima 601 100 l/min
Recipient de 0,6 l Set duze de 1,2 mm
LM 2000/B 220 l/min
Recipient de 0,5 l Set duze de 1,6 mm
Pistoale de vopsit
Set Eco
Cu pistol de vopsit Optima 601, pistol de gresare, pistol de suflare, pistol de umflat anvelope cu manometru, set pentru mingi şi roţi de bicicletă, 5 m furtun de PVC
Set complet de accesorii
Pistol de suflat 160 l/min
Cu niplu pentru cuplă rapidă şi duză de 1mm
Duză plată
Din plastic, cu 16 canale paralele de aer
Duză plată Cu reglaj al lăţimii jetului
Duză rotundă
Din alamă, jet de aer concentrat
Duză rotundă
Pentru suflarea suprafeţelor mari
Adaptor roţi bicicletă
Pentru umflarea roţilor de bicicletă
Prelungitoare 100 mm, 150 mm, 240 mm
Pistoale de suflat, duze şi prelungitoare
lăţime 150 mm
Din aluminiu
Suport furtun
Pistol de gresare 65 l/min
Recipient de 1 l din aluminiu, tub de suflat drept, conexiune aer cu niplu pentru cuplă rapidă
Pistol de gresare
125 l/min
Conexiune apă G 1/2 Consum de apă 1.25m ³/h (la 6 bar)
Pistol de spălat maşina
0,8l/cursă
Pentru cartuşe standard 215 x 50mm Conexiune aer cu niplu pentru cuplă rapidă
Pistol de silicon
180l/min
Cu recipient de 0,6 l Pentru nisip sablare de 0,2- 0,4mm
Pistol de sablat
lăţime 150 mm
Gama 0 ÷ 10 bar, conexiune pentru furtun cu interior de 6mm
Pistol de anvelope cu manometru
Set 3 bucăţi
Conţine adaptor pentru roţi bicicletă, adaptor de minge şi duză pentru umflat saltele şi bărci pneumatice
Set pentru roţi de bicicletă şi mingi
PVC
Armat cu ţesătură, cu cuple rapide pentru furtun
DN 6 x 3 mm, 5 m, 16 bar DN 6 x 3 mm, 20 m, 16 bar DN 9 x 3 mm, 10 m, 10 bar
DN 6 x 3 mm, 10 m, 16 bar DN 6 x 3 mm, 25 m, 16 bar DN 13 x 3.5 mm, 10 m, 10 bar
Furtun aer comprimat
CLASSIC Calitatea excepţională a produselor KAESER este asigurată de utilizarea celor mai bune componente şi materiale. Componentelor din fiecare compresor CLASSIC sunt
fabricate la standarde Kaeser de strictă calitate pentru a garanta performanţe şi fiabilitate de neegalat. Principalele componente ale compresorului sunt evidenţiate mai jos.
Filtru admisie aer cu insonorizare
Bloc de compresie
Transmisie directă 1:1 fără întreţinere
Protecţie ventilator
Presostat
Filtru cu regulator de presiune şi cuplă rapidă
Supapă de siguranţă (nu este vizibilă)
Recipient de aer acoperit cu pulberi
Amortizor de zgomot şi vibraţii
Buşon de umplere şi aerisire, pentru ulei
Dop de golire ulei
12
3456
789
1110
1
23
45
6 7
8
9
11
10
9
– Calitate din prima privire
Scule şi accesorii
Optima 601 100 l/min
Recipient de 0,6 l Set duze de 1,2 mm
LM 2000/B 220 l/min
Recipient de 0,5 l Set duze de 1,6 mm
Pistoale de vopsit
Set Eco
Cu pistol de vopsit Optima 601, pistol de gresare, pistol de suflare, pistol de umflat anvelope cu manometru, set pentru mingi şi roţi de bicicletă, 5 m furtun de PVC
Set complet de accesorii
Pistol de suflat 160 l/min
Cu niplu pentru cuplă rapidă şi duză de 1mm
Duză plată
Din plastic, cu 16 canale paralele de aer
Duză plată Cu reglaj al lăţimii jetului
Duză rotundă
Din alamă, jet de aer concentrat
Duză rotundă
Pentru suflarea suprafeţelor mari
Adaptor roţi bicicletă
Pentru umflarea roţilor de bicicletă
Prelungitoare 100 mm, 150 mm, 240 mm
Pistoale de suflat, duze şi prelungitoare
lăţime 150 mm
Din aluminiu
Suport furtun
Pistol de gresare 65 l/min
Recipient de 1 l din aluminiu, tub de suflat drept, conexiune aer cu niplu pentru cuplă rapidă
Pistol de gresare
125 l/min
Conexiune apă G 1/2 Consum de apă 1.25m ³/h (la 6 bar)
Pistol de spălat maşina
0,8l/cursă
Pentru cartuşe standard 215 x 50mm Conexiune aer cu niplu pentru cuplă rapidă
Pistol de silicon
180l/min
Cu recipient de 0,6 l Pentru nisip sablare de 0,2- 0,4mm
Pistol de sablat
lăţime 150 mm
Gama 0 ÷ 10 bar, conexiune pentru furtun cu interior de 6mm
Pistol de anvelope cu manometru
Set 3 bucăţi
Conţine adaptor pentru roţi bicicletă, adaptor de minge şi duză pentru umflat saltele şi bărci pneumatice
Set pentru roţi de bicicletă şi mingi
PVC
Armat cu ţesătură, cu cuple rapide pentru furtun
DN 6 x 3 mm, 5 m, 16 bar DN 6 x 3 mm, 20 m, 16 bar DN 9 x 3 mm, 10 m, 10 bar
DN 6 x 3 mm, 10 m, 16 bar DN 6 x 3 mm, 25 m, 16 bar DN 13 x 3.5 mm, 10 m, 10 bar
Furtun aer comprimat
CLASSIC Calitatea excepţională a produselor KAESER este asigurată de utilizarea celor mai bune componente şi materiale. Componentelor din fiecare compresor CLASSIC sunt
fabricate la standarde Kaeser de strictă calitate pentru a garanta performanţe şi fiabilitate de neegalat. Principalele componente ale compresorului sunt evidenţiate mai jos.
Filtru admisie aer cu insonorizare
Bloc de compresie
Transmisie directă 1:1 fără întreţinere
Protecţie ventilator
Presostat
Filtru cu regulator de presiune şi cuplă rapidă
Supapă de siguranţă (nu este vizibilă)
Recipient de aer acoperit cu pulberi
Amortizor de zgomot şi vibraţii
Buşon de umplere şi aerisire, pentru ulei
Dop de golire ulei
12
3456
789
1110
1
23
45
6 7
8
9
11
10
9
– Calitate din prima privire
P-33
9RO
/11
Spec
ificaţ
iile s
e po
t mod
ifica
fără
not
ificar
e pr
eala
bilă
www.kaeser.com
Fiind unul dintre cei mai mari producători de compresoare din lume, KAESER KOMPRESSOREN este reprezentat în toată lumea printr-o reţea vastă de sucursale, filiale şi parteneri autorizaţi în peste 90 de ţări.
Cu produse şi servicii inovatoare, inginerii şi consultanţii experimentaţi de la KAESER KOMPRESSOREN ajută clienţii în vederea creşterii competitivităţii printr-o strânsă colaborare care vizează conceperea unui sistem progresiv cu performanţă şi eficienţă crescută în producerea aerului comprimat. În plus, deceniile de experienţă şi cunoştinţe acumulate în furnizarea de sisteme industriale de vârf sunt disponibile pentru fiecare client prin intermediul reţelei informatice globale a grupului Kaeser.
Aceste avantaje, împreună cu reţeaua internaţională de service KAESER, asigură funcţionarea la capacitatea maximă şi disponibilitatea permanentă a tuturor produselor.
KAESER – Lumea este casa noastră
KAESER KOMPRESSOREN SRL – Bd. Ion Mihalache, Nr. 179 – 011181 Bucureşti Tel: +40 21 2245681 – Fax: +40 21 2245602www.kaeser.com – e-mail: [email protected]
Compresoare cu piston Seria Premium
www.kaeser.com
Debite aspirate: 130 ÷ 660 l/min – Presiune: 10 ÷ 25 bar
Prelucrare de precizie
Utilizând cele mai noi tehnologii de producţie şi cu peste 80 de ani de experienţă în prelucrarea de precizie, competenţa şi cercetarea continuă de la KAESER garantează produse la standarde de cea mai înaltă calitate.
Supape din oţel inoxidabil
Supapele lamelare din oţel inoxidabil sunt prevăzute cu limitatoare de cursă cu disipare de căldură pentru a asigura etanşeitatea supapelor şi o durată lungă de viaţă.
Asamblare meticuloasă
Atenţia din perioada de fabricaţie a blocului de compresie este de-asemenea acordată şi în fiecare etapă a asamblării compresorului.
Fluid de ungere rezistent la temperaturi ridicate
Fiecare compresor Kaeser pentru atelier este umplut cu fluid special, rezistent la temperaturi ridicate, care elimină aproape complet depunerile de carbon de pe supape. În plus, fluidul permite dublarea duratei unui schimb la aproximativ 1000 ore de funcţionare.
Compresoare COmPACT
Pentru îmbunătăţirea disipării căldurii, fiecare compresor COMPACT de la KAESER (până la 1,5 kW) include o carcasă integrată unică pentru motor şi blocul de compresie. Toate compresoarele PREMiuM de la KAESER se disting prin durabilitatea pistoanelor, a segmenţilor, bielelor, rulmenţilor şi a flanşelor manivelă.
Compresoare –Ce aşteptaţi de la compresorul dumneavoastră Premium?
Calitatea şi eficienţa muncii este puternic influenţată de sculele şi echipamentele folosite. Pentru a satisface o gamă largă de aplicaţii, compresoarele din seria Premium îndeplinesc cele mai înalte standarde de calitate şi fiabilitate.
Compresoare Premium pentru atelier – performanţă şi calitate profesională
Fiecare compresor din seria PREMiuM este dotat cu un bloc de compresie Kaeser cu necesar redus de întreţinere, un motor electric cuplat direct şi un recipient de aer acoperit la interior. Pentru puteri de până la 1,5 kW puteţi alege unul din noile compresoare COMPACT de la KAESER la care motorul şi carcasa compresorului formează un tot unitar. Blocurile de compresie sunt produse, asamblate şi testate de KAESER în fabrica de compresoare cu piston din Coburg, Germania. Recipientele de aer de calitate ridicată şi motoarele electrice sunt fabricate în exclusivitate pentru KAESER de către cei mai importanţi producători germani.
Simbol al calităţii şi tehnologiei moderne
Fabricat în Germania – compresoarele cu piston seria Premium de la KAESER asigură calitate şi performanţă de excepţie. Simbolurile LwA şi CE garantează că toate compresoarele sunt conforme cu cerinţele legale. Toate compresoarele Premium au omologare de tip.
Compresoarele Premium de la KAeSer – un model potrivit pentru orice aplicaţie
Construite cu grijă folosind cele mai bune materiale, fiecare unitate asigurând durată lungă de viaţă, eficienţă şi fiabilitate. Calitatea deosebită, designul robust şi intervalele mari de întreţinere (este necesară schimbarea uleiului doar o dată la doi ani) fac din seria Premium de compresoare KAESER, alegerea ideală pentru utilizarea zilnică.
Premium
Recipient de aer cu
acoperire interioară
200 145
30 10
1.1
1
69 770 x 510 x 450
250 180 1.25 68 770 x 510 x 450
300 215 1.5 70 770 x 510 x 450
350 28530
10
1.9 166
870 x 560 x 590
450 370 2.22
870 x 560 x 590
660 545 70 3 71 1060 x 700 x 630
150 108* 16 25 1.9 2 64 880 x 560 x 590
41
6 230 V AC43
45
759 230 V AC
86
118 6 400 V 3~
75 2 x G 1/4 230 V AC
–
–
Premium car 200/30 W Premium car 250/30 W Premium car 300/30 W
Premium car 350/30 W
Premium car 660/70 D
Premium car 450/30 W Premium car 150-2/16 W
Compresoarele „Premium car“ de la KAESER sunt perfect echipate pentru a răspunde diverselor cereri de pe un şantier de construcţii. Toate echipamentele sunt uşor de transportat şi sunt produse la cele mai ridicate standarde de calitate pentru a asigura o funcţionare îndelungată, eficientă şi sigură. O placă rigidă deasupra şi un cadru solid protejează compresoarele „Premium car“ împotriva celor mai grele condiţii de exploatare.
Îndepărtarea fără efort a tencuielii şi a faianţei
Sablare – rapidă şi eficientă
Fixare rapidă şi uşoară a şipcilor
Construcţie compactă pentru deplasare uşoară
Premium CArPentru acasă şi şantierePREMiuM CAR 200/30 W ÷ PREMiuM CAR 660/70 W
Specificaţie tehnică
1) Corespunzător umplerii recipientului de la 3 la 6 bar la temperatura de lucru; 2) Nivel presiune sonoră conform: ISO 3744, r= 4 m
Accesorii
● Recomandat; ○ Utilizare pe termen scurt; – Nu este posibil
Model Debit aspirat
l/min
Debit de umplere 1)
l/min
Volum recipient
l
Presiune max.
bar
Putere motor
kW
Număr de cilindrii
Nivel presiune sonoră 2)
dB(A)
Dimensiuniîn mm
L x l x H
PREMIUM CAR 200/30 W
PREMIUM CAR 250/30 W PREMIUM CAR 300/30 W PREMIUM CAR 350/30 W
PREMIUM CAR 450/30 W
PREMIUM CAR 660/70 D PREMIUM CAR 150-2/16 W
Masă netă kg
Conexiune furtun
mm
Tensiune de alimentare (50 Hz)
V
Curăţătoare cu ace
Recipient suplimentar
cu/fără furtun pe rolă
Set ciocan de dăltuitCH 0 cu cutie,
6 dălţi, lubrificator
Pistol de sablare SG 1 cu pahar şi
reglaj intensitate
*) Debit la 20 bar
Recipient de aer cu
acoperire interioară
130 100 10 10 0.75 1 59 370 x 410 x 650
250 180 30 10 1.25 1 70 410 x 530 x 810
350 285 30 10 1.9 1 67570 x 640 x 1010
650 x 630 x 1030
450 370 30 10 2.2 2 68640 x 570 x 1010
650 x 630 x 1030
160 125 4 20 1.1 1 60 570 x 350 x 510
200 145 4 10 1.1 1 60 570 x 350 x 510
250 180 4 10 1.25 1 61 570 x 350 x 510
300 215 4 10 1.5 1 61 570 x 350 x 510
27 6
38 6
709
68
796
76
31 6
32 6
33 6
34 6
● ● ○ –
● ● ○ –
● ● ● ●● ● ● ●● ● ● ●● ● ● ●● ● – –
● ● – –
● ● – –
● ● ○ –
Capsare rapidă şi uşoară a panourilor şi profilelor de lemn
Decopertare uşoară a pardoselilor
Etanşare curată şi profesională Deplasare uşoară în orice şantier
Modelele „Premium Compact” sunt special adaptate pentru micile şantiere, unde în general lucrează doar un singur om. Construcţia specială a acestor compresoare permite o manevrare uşoară cu o singură mână.
Compresoarele „Premium compact” sunt ideale pentru aplicaţii precum decopertare pardoseli, finisări interioare şi activităţi de întreţinere.
Specificaţie tehnică
1) Corespunzător umplerii recipientului de la 3 la 6 bar la temperatura de lucru; 2) Nivel de presiune sonoră măsurat conform: ISO 3744, r= 4 m; 3) cu roţi pentru urcatul scărilor
Premium COmPACT –Pentru lucrări de construcţii uşoarePREMiuM SiLENT 130/10 W ÷ PREMiuM COMPACT 250/4 W Designul compact al acestor compresoare le face ideale pentru lucrările de construcţii uşoare
Premium silent 130/10 W
PREMIUM COMPACT 160/4 W PREMIUM COMPACT 350/30 W PREMIUM COMPACT 450/30 W cu roţi pentru scări
PREMIUM COMPACT 250/30 W
Accesorii
● Recomandat; ○ Utilizare pe termen scurt; – Nu este posibil
Model Debit aspirat
l/min
Debit de umplere 1)
l/min
Volum recipient
l
Presiune max.
bar
Putere motor:
kW
Număr de cilindrii
Nivel presiune
acustică 2) dB(A)
Dimensiuniîn mm
L x l x H
PREMIUM SILENT 130/10 W PREMIUM COMPACT 250/30 W PREMIUM COMPACT 350/30 W
PREMIUM COMPACT S 350/30 W 3) PREMIUM COMPACT 450/30 W
PREMIUM COMPACT S 450/30 W 3) PREMIUM COMPACT 160/4 W PREMIUM COMPACT 200/4 W PREMIUM COMPACT 250/4 W PREMIUM COMPACT 300/4 W
Masă netă kg
Conexiune furtun
mm
Tensiune de alimentare (50 Hz)
V
230 V c.a.
230 V c.a.
230 V c.a. 230 V c.a.
230 V c.a.
Curăţătoare cu ace
Recipient suplimentar
cu/fără furtun pe rolă
Set ciocan de dăltuitCH 0 cu cutie,
6 dălţi, lubrificator
Pistol de sablare SG 1 cu pahar şi
reglaj intensitate
Recipient de aer cu
acoperire interioară
6 –
6 –
6
6
9
9
9
9
9
200 145 24 10 1.1 1 68 740 x 375 x 660750 x 375 x 660
2931
250 180 24 10 1.251.20 1 70 740 x 375 x 660 34
35
250 180 40 10 1.251.20 1 71 900 x 420 x 720
900 x 410 x 7204138
300 215 40 10 1.5 1 70 900 x 410 x 740 4142
350 285 40 10 1.91.7 1 68 900 x 420 x 760 63
56
350 285 90 10 1.91.7 1 69 1160 x 460 x 870
1180 x 460 x 8708073
450 370 40 10 2.22.4 2 69 900 x 500 x 720 70
65
450 370 90 10 2.22.4 2 71 1190 x 500 x 840
1120 x 500 x 8308682
660 545 90 10 3 2 71 1240 x 570 x 980 103
– – –
– –
– –
– –
– –
–
Cheie cu impact pentru strângere Găurire în lemn, metal sau beton
Şlefuire rapidă şi uşoară Vopsire cu rezultate deosebite fără efort
PREMIUM 200/24 PREMIUM 250/24
PREMIUM 450/40 PREMIUM 450/90 PREMIUM 660/90
PREMIUM 200/40 PREMIUM 250/40 PREMIUM 300/40
PREMIUM 350/40 PREMIUM 350/90
Compresoarele Premium pentru ateliere sunt deosebit de flexibile şi de aceea sunt perfect adaptate pentru a fi utilizate în domeniul reparaţiilor auto. Fie că este vorba de schimbarea rapidă a roţilor, mici reparaţii la caroserii sau furnizarea aerului comprimat în micile ateliere, compresorul Premium de la KAESER este alegerea perfectă.
Premium –Pentru atelierPREMiuM 200/24 W ÷ PREMiuM 660/90 D
Specificaţie tehnică
1) Corespunzător umplerii recipientului de la 3 la 6 bar la temperatura de lucru; 2) Nivel de presiune sonoră măsurat conform: ISO 3744
Accesorii
● Recomandat; ○ Utilizare pe termen scurt; – Nu este posibil
Model Debit aspirat
l/min
Debit de umplere 1)
l/min
Volum recipient
l
Presiune max.
bar
Putere motor:
kW
Număr de cilindrii
Nivel presiune
acustică 2) dB(A)
Dimensiuniîn mm
L x l x H
Masă netă kg
PREMIUM 200/24 W PREMIUM 200/24 D PREMIUM 250/24 W PREMIUM 250/24 D PREMIUM 250/40 W PREMIUM 250/40 D PREMIUM 300/40 W PREMIUM 300/40 D PREMIUM 350/40 W PREMIUM 350/40 D PREMIUM 350/90 W PREMIUM 350/90 D PREMIUM 450/40 W PREMIUM 450/40 D PREMIUM 450/90 W PREMIUM 450/90 D PREMIUM 660/90 D
Conexiune furtun
mm
Tensiune de alimentare
(50 Hz)V
Cu tambur pentrufurtun
230 V c.a. 400 V 3~
230 V c.a. 400 V 3~
230 V c.a. 400 V 3~ Opţiune
230 V c.a. 400 V 3~ Opţiune
230 V c.a. 400 V 3~ Opţiune
230 V c.a. 400 V 3~ Opţiune
230 V c.a. 400 V 3~ Opţiune
230 V c.a. 400 V 3~ Opţiune
400 V 3~ Opţiune
Set cheie cu impact SSPR 23
cu cutie, biţi, prelungitor, lubrificator
Bormaşină pneumatică BPR 10 LR cu
schimbare rapidă, sens stânga / dreapta
ŞlefuitorESR 150 ST
cu suport Velcro
Şurubelniţă pneumatică RWR 111 1/2“
cu mâner
Recipient de aer cu
acoperire interioară
Scule şi accesoriiCalitatea excepţională a produselor KAESER este asigurată de utilizarea celor mai bune componente şi materiale. Aceste componente se regăsesc în toată gama de
compresoare de aer PREMiuM renumite în întreaga lume pentru durabilitate şi performanţă. Principalele componente ale compresoarelor sunt evidenţiate mai jos:
– Calitate din prima privirePremium
Amortizor de zgomot şi vibraţii
Ventilator / volantă
Cutie pentru conexiuni cu protecţie la suprasarcină
Condensator
Recipient de aer acoperit la interior
Opţiune pentru pornire la rece
Roţi solide
Conducte cu aripioare de răcire
Filtru admisie aer cu insonorizare
Bloc de compresie
Transmisie directă 1:1 fără întreţinere
Presostat cu pornire descărcată
Filtru cu regulator de presiune şi cuplă rapidă
Supapă de siguranţă
Supapă de reţinere
Buşon de umplere şi aerisire, pentru ulei
Dop de golire ulei
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
CH 0350 l/min
Dimensiune sculă 15 x 2,8 x 51,1 Frecvenţă lovituri 36 000 / min
Set CH 0350 l/min
Cutie cu 6 dălţi şi lubrificator
Ciocane pneumatice pentru dăltuit
Ungător 3/8“ până la 1 400 l/min
Pentru montaj pe scula pneumatică sau pe furtun
Ungător de scule
Optima 601100 l/min
Pahar de 0,6 l Set duze de 1,2 mm
LM 2000/B220 l/min
Pahar de 0,5 l Set duze de 1,6 mm
Pistoale de vopsit
Set Eco Cu pistol de vopsit Optima 601, pistol de gresare, pistol de suflare, pistol de umflat anvelope cu manometru, set pentru mingi şi roţi de bicicletă, 5 m furtun de PVC
Set complet de accesorii
Pistoale de suflat, duze şi prelungitoare
Pistol de suflat160 l/min
Cu cuplă tată şi duză de 1 mm
Duză plată Din plastic, cu 16 canale paralele de aer
Duză plată Cu reglaj al lăţimii jetului
Duză rotundă Din alamă, jet de aer concentrat
Duză rotundă Pentru suflarea suprafeţelor mari
Adaptor roţi bicicletă
Pentru umflarea roţilor de bicicletă
Prelungitoare 100 mm, 150 mm, 240 mm
Pistoale cu aspiraţie 180-310 l/min
Cu 4 m de furtun, duze de 2 mm pentru var, emulsii şi glazuri
Pistoale cu aspiraţie
lăţime 150 mm
Din aluminiu
Suport furtun
PVC, armat cu ţesătură, cu cuple rapide pentru furtun
DN 6 x 3 MM, 5 M, 16 BAR DN 6 x 3 MM, 10 M, 16 BAR DN 6 x 3 MM, 20 M, 16 BAR DN 6 x 3 MM, 25 M, 16 BAR DN 9 x 3 MM, 10 M, 10 BAR DN 13 x 3,5 MM, 10 M, 10 BAR
Furtun aer comprimat
Cu racord flexibil sau rigid Opţional cu posibilitate de calibrare sau gata calibrat
Asigură o rezervă de aer comprimat fără pierderi. Recipient de aer de 15 l, 11 bar, acoperit la interior. Cu tambur şi 20 m furtun. Disponibil şi fără set tambur.
Rezervor de aer
180 l/min Cu pahar de 0,6 l pentru sablare cu nisip de 0,2 - 0,4 mm
Pistol de sablat
Set 3 bucăţi Conţine adaptor pentru roţi bicicletă, adaptor de minge şi duză pentru umflat saltele şi bărci pneumatice
Set de umflat mingi şi roţi de bicicletă
Pistol de umflat anvelope cu manometru şi racord
11
13 14
16
17
PREMIUM COMPACT 450/30 W
10
12
3
4
56
7
8
9
PREMIUM COMPACT 450/30 W
15
12
Scule şi accesoriiCalitatea excepţională a produselor KAESER este asigurată de utilizarea celor mai bune componente şi materiale. Aceste componente se regăsesc în toată gama de
compresoare de aer PREMiuM renumite în întreaga lume pentru durabilitate şi performanţă. Principalele componente ale compresoarelor sunt evidenţiate mai jos:
– Calitate din prima privirePremium
Amortizor de zgomot şi vibraţii
Ventilator / volantă
Cutie pentru conexiuni cu protecţie la suprasarcină
Condensator
Recipient de aer acoperit la interior
Opţiune pentru pornire la rece
Roţi solide
Conducte cu aripioare de răcire
Filtru admisie aer cu insonorizare
Bloc de compresie
Transmisie directă 1:1 fără întreţinere
Presostat cu pornire descărcată
Filtru cu regulator de presiune şi cuplă rapidă
Supapă de siguranţă
Supapă de reţinere
Buşon de umplere şi aerisire, pentru ulei
Dop de golire ulei
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
CH 0350 l/min
Dimensiune sculă 15 x 2,8 x 51,1 Frecvenţă lovituri 36 000 / min
Set CH 0350 l/min
Cutie cu 6 dălţi şi lubrificator
Ciocane pneumatice pentru dăltuit
Ungător 3/8“ până la 1 400 l/min
Pentru montaj pe scula pneumatică sau pe furtun
Ungător de scule
Optima 601100 l/min
Pahar de 0,6 l Set duze de 1,2 mm
LM 2000/B220 l/min
Pahar de 0,5 l Set duze de 1,6 mm
Pistoale de vopsit
Set Eco Cu pistol de vopsit Optima 601, pistol de gresare, pistol de suflare, pistol de umflat anvelope cu manometru, set pentru mingi şi roţi de bicicletă, 5 m furtun de PVC
Set complet de accesorii
Pistoale de suflat, duze şi prelungitoare
Pistol de suflat160 l/min
Cu cuplă tată şi duză de 1 mm
Duză plată Din plastic, cu 16 canale paralele de aer
Duză plată Cu reglaj al lăţimii jetului
Duză rotundă Din alamă, jet de aer concentrat
Duză rotundă Pentru suflarea suprafeţelor mari
Adaptor roţi bicicletă
Pentru umflarea roţilor de bicicletă
Prelungitoare 100 mm, 150 mm, 240 mm
Pistoale cu aspiraţie 180-310 l/min
Cu 4 m de furtun, duze de 2 mm pentru var, emulsii şi glazuri
Pistoale cu aspiraţie
lăţime 150 mm
Din aluminiu
Suport furtun
PVC, armat cu ţesătură, cu cuple rapide pentru furtun
DN 6 x 3 MM, 5 M, 16 BAR DN 6 x 3 MM, 10 M, 16 BAR DN 6 x 3 MM, 20 M, 16 BAR DN 6 x 3 MM, 25 M, 16 BAR DN 9 x 3 MM, 10 M, 10 BAR DN 13 x 3,5 MM, 10 M, 10 BAR
Furtun aer comprimat
Cu racord flexibil sau rigid Opţional cu posibilitate de calibrare sau gata calibrat
Asigură o rezervă de aer comprimat fără pierderi. Recipient de aer de 15 l, 11 bar, acoperit la interior. Cu tambur şi 20 m furtun. Disponibil şi fără set tambur.
Rezervor de aer
180 l/min Cu pahar de 0,6 l pentru sablare cu nisip de 0,2 - 0,4 mm
Pistol de sablat
Set 3 bucăţi Conţine adaptor pentru roţi bicicletă, adaptor de minge şi duză pentru umflat saltele şi bărci pneumatice
Set de umflat mingi şi roţi de bicicletă
Pistol de umflat anvelope cu manometru şi racord
11
13 14
16
17
PREMIUM COMPACT 450/30 W
10
12
3
4
56
7
8
9
PREMIUM COMPACT 450/30 W
15
12
Fiind unul dintre cei mai mari producători de compresoare cu şurub din lume, KAESER KOMPRESSOREN este reprezentat în toată lumea printr-o reţea vastă de sucursale, filiale şi parteneri autorizaţi în peste 90 de ţări.
Cu produse şi servicii inovatoare, inginerii şi consultanţii experimentaţi de la KAESER KOMPRESSOREN ajută clienţii în vederea creşterii competitivităţii printr-o strânsă colaborare care vizează conceperea unui sistem progresiv cu performanţă şi eficienţă crescută în producerea aerului comprimat. În plus, deceniile de experienţă şi cunoştinţe acumulate în furnizarea de sisteme industriale de vârf sunt disponibile pentru fiecare client prin intermediul reţelei informatice globale a grupului Kaeser.
Aceste avantaje, împreună cu reţeaua internaţională de service KAESER, asigură funcţionarea la capacitatea maximă şi disponibilitatea permanentă a tuturor produselor.
KAeSer – Lumea este casa noastră
KAESER KOMPRESSOREN SRL Bd. ion Mihalache, Nr. 179 – 011181 Bucureşti – Tel: +40 21 2245681 – Fax: +40 21 2245602www.kaeser.com – e-mail: [email protected] P-
340R
O/1
1 Sp
ecific
aţiile
se
pot m
odific
a fă
ră n
otific
are
prea
labi
lă
www.kaeser.com
www.kaeser.com
Reciprocating Compressors Industrial Quality Air delivery 0.87 to 16.10 m³/min – Pressure 7 to 35 bar
Industrial reciprocating compressors
Key features:
- Compressor blocks Made in Germany
- Modular design
- Optimum quality assured
QM-system testing
Each compressor system undergoes comprehensive testing before delivery. All components must pass the stringent tests determined by our Quality Management System. All compressors must prove themselves in real-world conditions before we dispatch them to our customers.
What do you expect from an industrial quality reciprocating compressor?
As a compressed air user, you expect maximum efficiency and reliability from your air system. Therefore, the most efficient reciprocating compressors are dependable, robust, require little maintenance, have a long service life and provide optimum flexibility. KAESER industrial quality air compressors meet all of these criteria to ensure a compressed air supply of the highest quality.
Advantages of KAESER industrial reciprocating compressors include:
- The knowledge and expertise of nearly 100 years experience in precision engineering and design. - Made in Germany from the highest quality materials, KAESER’s compressor blocks are logically designed and undergo rigorous inspection to guarantee years of reliable service. - Outstanding performance, dependability, ease of maintenance and long service life. - Energy-saving drive motors rated to 'EU eff2' standards. - Exceptional versatility to meet the needs of a wide range of compressed air applications. - Proven oil-lubricated and dry-running compressor technology.
Quality: Made in Germany
Made in Germany: These words represent KAESER’s continued commitment to producing specifically tailored compressed air solutions that deliver unrivalled customer satisfaction. Each compressor block is meticulously assembled and tested to the very highest standards at KAESER’s reciprocating compressor production centre in Coburg, Germany. Other items such as pressure switches, solenoid valves and air receivers are chosen only from those specialist manufacturers that meet KAESER's uncompromising quality requirements. The logical, modular design of each system provides maximum flexibility, which not only allows system performance to be precisely matched to requirement, but also ensures optimum efficiency.
A I R R E C E I V E R
INTERNALLY COATED
A I R R E C E I V E R
INTERNALLY COATED
Made in Germany
KAESER compressor blocks are made from materials of the highest quality. Each component is manufactured, inspected and assembled with meticulous care and precision. The result is a highly durable compressor which combines outstanding performance with unrivalled energy efficiency.
Stainless steel valves
The valve reeds in the corrosion resistant stainless steel valves are equipped with lift limiters to ensure air-tight valve closure and to prevent build-up of oil carbon. This achieves exceptional service life and dependability.
Precision machining
Using the most advanced manufacturing processes and with almost 100 years of experience in precision engineering, KAESER’s skill and expertise guarantee premium quality products.
Wear-free cylinder
Our special machining process produces a perfect finish on the inside wall of the cylinder, which makes running-in of the compressor unnecessary as no significant wear takes place after the unit is started for the first time.
KCCD 130-100
KCD 350-100
KCD 450-100
KCCD 130-150
KCD 350-350
KCD 450-350
KCD 630-350
KCD 840-350
KCTD230-100
KCTD 420-100
2x 130 2x 350 2x 450 2x 130 2x 350 2x 450 2x 630 2x 840 2x 230 2x 420
2x 80 2x 230 2x 300 2x 80 2x 230 2x 300 2x 440 2x 590 2x 152 2x 252
2x 73 2x 210 2x 280 2x 73 2x 210 2x 280 2x 410 2x 544 – –
2x 0.75 2x 1.7 2x 2.4 2x 0.75 2x 1.7 2x 2.4 2x 3 2x 4 2x 1.5 (2.2)4) 2x 2.2
2x 1 2x 1 2x 2 2x 1 2x 2 2x 2
90 90 90 350 350 90
78 79 80 78 79 80 79 81 72 73
1090 1110 1820 1210
430 490 500 600 660 570 500
780 830 780 1050 1120 1100 1200 1220 810 780
85 105 115 170 180 230 235 120 165
69 69 70 - - - - -
Low speed operation: Maximum reliability, extended service life
Technical Specifications
Highly effective cooling Aluminium cylinder heads provide exceptional heat dissipation to ensure extended service life.
1) Effective air delivery as per VDMA standard sheet 4362 – 2) Power supply: 400 V, 50 Hz, 3 Ph 3) Free field measurement to DIN 45635 at 1 m distance – 4) Actual required power (rated motor power)
Dual cooling Optimum cooling with double-stream airflow.
1) Effective air delivery as per VDMA standard sheet 4362 – 2) Power supply: 400 V, 50 Hz, 3 Ph 3) Free field measurement to DIN 45635 at 1 m distance (both compressors operating) – 4) Actual required power (rated motor power)
10 bar dual systems 7 bar dual systems (dry-running)
Displacement I/minEffective air delivery1) at 6 bar
at 8 barMotor power 2) kWNumber of cylindersAir receiver capacity ISound pressure level 3) dB (A)Width mmDepth mmHeight mmWeight kg
With sound enclosureSound pressure level 3) dB (A) – –
Start mode Direct start, unloaded
Motor protection Overload protection trip as standard
Anti-vibration mounts Standard
Technical Specifications
Directly coupled unit Drive motor directly coupled to the compressor block. Low speed operation of only 1500 rpm ensures maximum reliability and extended service life.
Dual pressure switches Dual pressure switches vent the compressors for unloaded starting.The cut-in and cut-out pressures can also be individually set.
Dual systems ■ Space-saving design with twin compressor units mounted on a single air receiver
■ A reliable source of compressed air at all times, even whilst one unit is being serviced
■ Oil-lubricated and dry-running versions
■ Ready for immediate use
■ Available with sound enclosure (up to KCD 450-100)
Base-mounted systems up to 35 bar ■ Ideal for use as an auxiliary compressor with existing air receivers
■ Pressure: 35 bar
■ Low speed operation (710 – 1160 strokes per min) ensures maximum reliability and extended service life
35 bar, base-mounted Dry-running, integrated base-mounted compressors
K 175-2 -G/H35
K 250-2 -G/H35
K 350-2 -G/H35
K 500-2 -G/H35
K 700-2 -G/H35
K 1000-2 -G/H35
K 1300-2 -G/H35
K 1600-2 -G/H35
KCT 110
KCT 230
KCT 420
KCT 1500
KCT 180
KCT 401
KCT 550
KCT 840
KCT 1000-2
Displacement I/min 175 250 350 500 700 1000 1300 1600 110 230 420 1500 180 400 550 840 1000
Effective air delivery1) at 6 bar – 60 152 252 920 100 275 375 575 700
at 12 bar 136 202 284 407 560 800 1150 1400 – –
Motor power 2) kW 2.2 3 4 5.5 7.5 11 5 18.5 0.75 1.5 (2.2)4) 2.2 7.5 1.1 2.4 3 4 7.5
Max. working pressure bar 35 7 10
Number of cylinders 2 2 2 2 2 2 3 3 1 2 1 2
Block speed strokes/min 910 710 760 760 810 1130 960 1160 1500 1500
Sound pressure level 3) dB (A) 75 72 74 76 80 81 83 84 67 73 75 82 73 75 78 82
Width mm 890 1280 1290 1450 1470 1580 1620 420 500 500 770 510 580 600 640 770
Depth mm 380 490 590 820 870 830 270 470 560 850 300 475 475 650 620
Height mm 520 710 690 900 910 950 320 350 360 640 520 400 400 550 660
Weight kg 60 140 155 220 235 325 315 470 21 38 40 125 30 47 65 70 125
Auto. star-delta starter 4)
Not necessary Option Option Option Option Option Verify according to installation situation
Verify according to installation situation
Anti-vibration mounts Standard – –
KCT 550
Directly coupled systems ■ Dry-running directly coupled systems with 1:1 drive
A I R R E C E I V E R
INTERNALLY COATED
KCT 110-25
KCT 230-40
KCT420-100
KCT 401-100
KCT550-100
KCT840-100
KCT840-250
KCT401-250 St
KCT550-250 St
KCT840-250 St
110 230 420 400 550 840 840 400 550 840
60 150 252 275 376 575 575 275 376 575
- - - 250 345 525 525 250 345 525
24 40 90 90 90 90 250 250 250 250
0.75 1.4 (2.2)3) 2.2 2.4 3 4 4 2.4 3 4
1 2 2 2 2 2 2 2 2 2
1500 1500 1500 1500 1500 1500 1500 1500 1500 1500
72 73 75 75 76 78 78 75 76 78
640 820 1080 1110 1180 1160 1600 720 720 680
290 475 570 480 670 680 650 640 680
680 740 840 910 1010 1160 1770 1920
33 57 76 90 100 110 170 135 145 170
62 63 65 65 66 68 65 66 68
Dry-running compressors: Low-maintenance and quiet operation
7 bar 10 bar, horizontal 10 bar, vertical
Displacement I/minEffective air delivery1) at 6 bar at 8 barAir receiver volume 2) IMotor power kWNumber of cylindersBlock speed strokes/minSound pressure level 3) db (A)Width mmDepth mmHeight mmWeight kgVersion with sound enclosure Enclosure over enclosure Enclosure over compressor Enclosure over compressor
Sound pressure level 4) db (A)
Technical Specifications
1) Effective air delivery as per VDMA standard sheet 4362 – 2) Air receiver internally coated 3) Actual required power (maximum motor power) – 4) Free field measurement to DIN 45635 at 1 m distance.
Dual cooling Highly effective cooling with double-stream airflow. Crank casing internally cooled to enable maximum pressure up to 10 bar (KCT 401 to 840).
Direct drive Directly coupled units are maintenance-free and eliminate the transmission losses associated with other drive system designs.
Directly coupled systems ■ Compact design with direct coupling of drive motor and compressor block
■ Teflon-coated pistons and low speed operation (1500 strokes per min) ensure exceptional durability
■ Air receiver internally coated
BreweriesKAESER industrial reciprocating compressors provide breweries with a dependable supply of clean compressed air e.g. for use in wort aeration.
Winter sportsKAESER oil-free reciprocating compressors ensure ski pistes are evenly covered with snow and help to significantly extend the winter sport season in lower and mid-level resorts.
ViticultureThe annual winter ritual of pruning the grape vines is made simple thanks to reciprocating compressor systems from KAESER.
Research and developmentLaboratories require compressed air of the very highest quality, which is never a problem for KAESER compressors.
Sprinkler systemsKAESER compressors provide the reliability that is so essential for fire protection systems.
PrintingPrinting works throughout the world rely on the dependability and exceptional performance of KAESER compressor systems to keep production costs to an absolute minimum.
Tailored solutions With decades of experience in compressed air system design & planning and satisfied customers in every industrial sector, Kaeser Kompressoren is able to provide the perfect compressed air solution to meet your exact
Standard base-frame layout for production of control air for print machinery.
Reciprocating compressor with direct drive
Sound enclosure
Internally-coated air receiver
Refrigeration dryer
Microfilter
Condensate treatment system
Control unit
1
2
3
4
5
6
7
needs. The modular design concept of our wide range of industrial reciprocating compressors allows us to create turnkey compressed air systems to suit any compressed air requirement.
1
2
3
4
5
6
7
A I R R E C E I V E R
INTERNALLY COATED
KCT 110-25
KCT 230-40
KCT420-100
KCT 401-100
KCT550-100
KCT840-100
KCT840-250
KCT401-250 St
KCT550-250 St
KCT840-250 St
110 230 420 400 550 840 840 400 550 840
60 150 252 275 376 575 575 275 376 575
- - - 250 345 525 525 250 345 525
24 40 90 90 90 90 250 250 250 250
0.75 1.4 (2.2)3) 2.2 2.4 3 4 4 2.4 3 4
1 2 2 2 2 2 2 2 2 2
1500 1500 1500 1500 1500 1500 1500 1500 1500 1500
72 73 75 75 76 78 78 75 76 78
640 820 1080 1110 1180 1160 1600 720 720 680
290 475 570 480 670 680 650 640 680
680 740 840 910 1010 1160 1770 1920
33 57 76 90 100 110 170 135 145 170
62 63 65 65 66 68 65 66 68
Dry-running compressors: Low-maintenance and quiet operation
7 bar 10 bar, horizontal 10 bar, vertical
Displacement I/minEffective air delivery1) at 6 bar at 8 barAir receiver volume 2) IMotor power kWNumber of cylindersBlock speed strokes/minSound pressure level 3) db (A)Width mmDepth mmHeight mmWeight kgVersion with sound enclosure Enclosure over enclosure Enclosure over compressor Enclosure over compressor
Sound pressure level 4) db (A)
Technical Specifications
1) Effective air delivery as per VDMA standard sheet 4362 – 2) Air receiver internally coated 3) Actual required power (maximum motor power) – 4) Free field measurement to DIN 45635 at 1 m distance.
Dual cooling Highly effective cooling with double-stream airflow. Crank casing internally cooled to enable maximum pressure up to 10 bar (KCT 401 to 840).
Direct drive Directly coupled units are maintenance-free and eliminate the transmission losses associated with other drive system designs.
Directly coupled systems ■ Compact design with direct coupling of drive motor and compressor block
■ Teflon-coated pistons and low speed operation (1500 strokes per min) ensure exceptional durability
■ Air receiver internally coated
BreweriesKAESER industrial reciprocating compressors provide breweries with a dependable supply of clean compressed air e.g. for use in wort aeration.
Winter sportsKAESER oil-free reciprocating compressors ensure ski pistes are evenly covered with snow and help to significantly extend the winter sport season in lower and mid-level resorts.
ViticultureThe annual winter ritual of pruning the grape vines is made simple thanks to reciprocating compressor systems from KAESER.
Research and developmentLaboratories require compressed air of the very highest quality, which is never a problem for KAESER compressors.
Sprinkler systemsKAESER compressors provide the reliability that is so essential for fire protection systems.
PrintingPrinting works throughout the world rely on the dependability and exceptional performance of KAESER compressor systems to keep production costs to an absolute minimum.
Tailored solutions With decades of experience in compressed air system design & planning and satisfied customers in every industrial sector, Kaeser Kompressoren is able to provide the perfect compressed air solution to meet your exact
Standard base-frame layout for production of control air for print machinery.
Reciprocating compressor with direct drive
Sound enclosure
Internally-coated air receiver
Refrigeration dryer
Microfilter
Condensate treatment system
Control unit
1
2
3
4
5
6
7
needs. The modular design concept of our wide range of industrial reciprocating compressors allows us to create turnkey compressed air systems to suit any compressed air requirement.
1
2
3
4
5
6
7
A I R R E C E I V E R
INTERNALLY COATED
www.kaeser.com
P-41
4ED.
5/10
Spe
cifica
tions
are
sub
ject
to c
hang
e wi
thou
t not
ice
Explanation:ED = ECO DRAINElectronic level-controlledcondensate drainFB = Pre-filterFC = Pre-filter
Application examples: Selection of treatment classes to ISO 8573-1
Choose the required grade of treatment according to your field of application:Air treatment using a refrigeration dryer (3 °C pressure dew point)
Paint spraying, powder coating
Solids Oil BacteriaWater
Packaging, control andinstrument air
Untreated98 5
Base-mounted compressor
CompressorED
ED
ED
41 1 KA
ES
ER
FFG KA
ES
ER
AMCS41 2 FE
ED
Aquamat
Refrigeration dryer
Airreceiver
KA
ES
ER
KAESERK
AE
SE
R
KA
ES
ER
+ Solids – + Water/condensate – + Oil – + Bacteria –
Contaminants:
Degree of filtration:
Solids/particles1) Humidity 2)Total
oilcontent 2)
Max.particle
size
µm
Max.particle
concentration
mg/m³
Pressure dew point
(x = Liquid water in
g/m³) mg/m³
0 Consult Kaeser regarding pure air and clean room technology
1 0.1 0.1 ≤ - 70 ≤ 0.01
2 1 1 ≤ - 40 ≤ 0.1
3 5 5 ≤ - 20 ≤ 1
4 15 8 ≤ + 3 ≤ 5
5 40 10 ≤ + 7 –
6 – – ≤ + 10 –
7 – – x ≤ 0.5 –
8 – – 0.5 < x ≤ 5 –
9 – – 5 < x ≤ 10 –
Clas
s IS
O 8
573-
1
1) As per ISO 8573-1:1991 (The specifi cation for particle content is not measured as per ISO 8573-1:2001, as the limits defi ned therein for Class 1 are to be applied to ‘Clean Rooms’)2) As per ISO 8573-1:2001
Aquamat = Condensate treatment systemAMCS = Air-main charging system
FE = MicrofilterSeparates aerosol oil and solid particlesFF = MicrofilterSeparates aerosol oil and solid particles
FG = Activated carbon filter For adsorption of oil vapoursFFG = Activated carbon and microfilter combination RD = Refrigeration dryerFor drying compressed air, pressure dew point to +3 °C
KAESER KompRESSoREn GmbH P.O. Box 2143 – 96410 Coburg – GERMANY – Tel +49 9561 640-0 – Fax +49 9561 640130www.kaeser.com – e-mail: [email protected]
www.kaeser.com
N SeriesInitial pressure up to 13 bar – Final pressure up to 45 bar Air delivery 0.28 - 18 m³/min
Rotary screw compressor High pressure air receiverAir receiver Booster
Compressed air system with booster up to 45 bar
High pressure refrigeration dryer
Pre-filter
Air tools
Schematic illustration
High pressure microfilter
45 bar compressed air network
Further information is also available in our SIGMA PET AIR brochure: P-200
Low pressure network up to 13 bar
Why do we need a booster?
The ability to offer compressed air at various pressures makesit one of the most versatile energy sources available. Special applicationsrequire specifically tailored solutions in order to achieve optimum efficiency. Boosters are ideal for applications such as PET container production for example, where compressed air is required at a higher pressure than the standard works or control air at particular points in the manufacturing process. In such instances, it is more economical to use the existing works air and boost it to the higher pressure with a small local compressor, rather than to operate the whole compressed air system at the higher pressure. Regulating the pressure of a high pressure network to suit low-pressure applications (which account for most air usage) is simply a waste of money.
KAESER offers a comprehensive range of high performance reciprocating compressors that are able to boost compressed air from a screw compressor up to pressures as high as 45 bar(g). These machines are perfectly matched for use with KAESER KOMPRESSOREN’s extensive range of screw compressors and SIGMA PET Air systems.
Effective up to 45 barContinuous research and development
KAESER KOMPRESSOREN’s strategy of continuous research and development ensures that every product provides exceptional performance and reliability. KAESER’s wide range of boosters for example, features the very latest innovations in reciprocating compressor technology. These include newly designed compressor blocks with oil pumps and a high efficiency cooler, both of which are essential for optimised high pressure system operation. In addition, design details such as pressurised oil lubrication and intensive cylinder cooling allow up to 100 percent duty cycles.
KAESER compressor block
Designed and manufactured by KAESER, the high-pressure compressor blocks are available as two or three cylinder models and operate at low speed to ensure years of reliable and efficient service.
High quality cylinder
Every KAESER booster is equipped with super-precision cylinders, each finished by a special process to ensure minimum oil consumption and negligible wear for maximum durability.
Low temperatures
Three-cylinder models are equipped with a fan-assisted after-cooler to ensure lowest possible compressed air outlet temperatures. A water-cooled after-cooler version is available to achieve even lower “Delta T” results.
Premium efficiency motor
High efficiency EU eff1 motors consume less power for greater output and are standard throughout the range of KAESER compressors. Their low operating temperature is an added advantage, especially in environments with a high ambient temperature.
Select the bestIt is not uncommon for a booster to achieve a maximum pressure of 40 bar, but this once standard figure can now only be considered as second best. KAESER booster systems are in a class of their own however, as they are the product of decades of experience in compressor system design and guarantee continuous delivery at 45 bar.
D T = 6-7 Kelvin
Versatile Range
N 253 G to N 502 G, air-cooled
Low maintenance = Savings
The combination of the innovative forced lubrication system, precision machining and high quality components ensures minimal maintenance requirement.
Efficient air cooler
Highly efficient and maintenance-free, the cooler on two-cylinder compressors achieves very low compressed air discharge temperatures.
Maximum safety
Oil pressure, cylinder head temperatures and air discharge temperatures are continuously monitored on models N 253 G to N 1400 G. The safety shut-down sequence is initiated via alarm signals.
Start-Control
The 'Start Control' provides reliable booster monitoring and control and also reduces the starting load.
Manual belt tensioning
Quick and easy adjustment maintains optimum power transmission on single- and two-cylinder boosters.
Optimum lubrication
Equipped with an oil pump and oil filters, the new continuous oil filtration system available for aftercooler models N 253 G to N 1400 G extends the oil change interval to 2000 operating hours.
Automatic belt tensioning
On models N 753 G to N 1400 G constant spring pressure on the motor swing-frame keeps the drive belt at the correct tension to ensure virtually maintenance-free power transmission.
The N series sets the new standard
Nitrogen/Helium compression
Upon request, modified versions of N-series systems are available for compression of nitrogen and helium.
Anti-vibration mounts
For vibration-free and quiet operation the machine can be mounted either on rubber feet.
N 60 G to N 153 G, air-cooled
N 753 G to N 2001 G, air-cooled or water-cooled aftercooler available
...or on anti-vibration mounts.
Premium efficiency motor
Eff1-rated motors consume less power for greater output and provide outstanding efficiency.
Energy saved with an eff 1 motor
For lower demand
The smaller models in this range are best suited to applications where low volumes of air are needed at up to 40 bar pressure. These compressors are equipped with one- or two-cylinder compressor blocks and are driven by high efficiency motors with up to 4 kW capacity. The quality of these units is second to none as all compressor blocks are designed, manufactured and assembled by KAESER.
Medium to large demand
When greater volumes of air are needed at pressures up to 45 bar then the larger of the KAESER booster models are the natural choice. The core of these “power houses” is the high-precision, two- or three-cylinder compressor block with specially finished high quality cylinders and premium efficiency eff1 electric motors providing capacities up to 45 kW. The manual (two-cylinder models) or automatic drive belt tensioning systems (three-cylinder models) ensure constant efficient power transmission for reliable and economic operation.
According to application, air-cooled or water-cooled aftercooler versions are available (N 253 G - N 502 only air-cooled, from N 753 G air- or water-cooled aftercooler).
Air-cooled versions (N 753 G - N 2001 G) are equipped with a separate fan-assisted aftercooler to keep the temperature differential between the inlet and compressed air (∆T) within close tolerances.
To ensure optimum cooling performance with a ∆T value of only approximately 5 K even at high ambient temperatures, models N 753 to N 2001 can be equipped with a water-cooled compressed air aftercooler.
Investment costsMaintenance costs
Energy costs
HeN2Nitrogen
Helium
Technical Specifications – Boosters Dimensions
Width (W), Depth (D) and Height (H) – See adjacent table for details.
The SIGMA PET AIR system is a turnkey package. See brochure P-200 for further details
N 253 G to N 502 G, air-cooled
D
H
W
DW
H
N 753 G to N 2001 G, water-cooled
N 60 G to N 153 G, air-cooled
D
H
W
ModelInlet pressure Final pressure Air delivery Displacement Rated motor
powerTheoretical inlet
volumeNo. of
cylindersCompressor
speed Sound pressure levelWithout
enclosure With enclosure
bar bar m3/min l/min kW m3/min Strokes per min dB(A) dB(A)
Cooler type Max. dimensions air-cooled version
W x D x H mm
Weight max.
Air- cooled
Air-cooled with separate fan
Water- cooled kg
N 60-G
5 25 0.28 60 2.2 0.36
1 1040 74 647.5 35 0.39 60 2.2 0.5110 35 0.52 60 2.2 0.6613 35 0.69 60 2.2 0.84
N 153-G
5 15 0.69 150 2.2 0.91
2 660 74 64
5 25 0.46 150 47.5 15 1.08 150 2.2 1.287.5 35 0.68 150 410 15 1.40 150 2.2 1.6610 40 0.93 150 413 25 1.60 150 4 2.1213 40 1.3 150 4
N 253-G
5 25 1.05 250 7.5 1.54
2 1120 76 66
7.5 20 1.57 250 7.5 2.187.5 35 1.41 250 1110 25 2.30 250 7.5 2.8210 45 1.93 250 1113 20 3.18 250 7.5 3.5913 45 2.72 250 11
N 351-G
5 25 1.55 350 11 2.19
2 910 77 67
7.5 25 2.50 350 11 3.117.5 35 2.34 350 1510 25 3.54 350 11 4.0210 45 3.00 350 1513 25 4.91 350 11 5.1213 45 4.19 350 15
N 502-G
5 15 2.3 500 11 2.94
2 970 77 62
5 25 2.02 500 117.5 15 3.52 500 11 4.167.5 35 2.92 500 1510 15 4.73 500 11
5.3810 35 4.11 500 1510 45 3.79 500 18.513 35 5.4 500 15 6.8513 45 5.09 500 18.5
N 753-G
5 25 4.73 1040 22 6.21
3
1300
79 707.5 35 6.93 1040 30 8.80 130010 45 7.65 880 30 9.64 110013 45 9.76 830 30 11.60 1040
N 1100-G
5 25 6.55 1490 30 8.95
3
1300
79 707.5 35 9.26 1310 37 11.11 114010 45 9.63 1080 37 11.86 94013 45 12.12 1000 37 13.97 870
N 1400-G
7.5 30 10.55 1490 45 12.7
3
1300
79 7010 35 14.2 1490 45 16.4 130010 45 11.68 1310 45 14.4 114013 45 14.34 1180 45 16.5 1030
N 2001-G
5 10 12.1 2290 30 13.7
3
1100
84 2) 705 25 9.02 1910 37 11.5 9207.5 25 11.1 1810 37 15.4 87010 25 15.4 1810 37 19.9 870
o – –880 x 390 x 540 65
1030 x 640 x 620 100
o – –
1370 x 710 x 820 200
1620 x 1280 x 990 390
o – –
1380 x 720 x 820 285
1620 x 1280 x 990 475
o – –
1520 x 870 x 1000 390
1940 x 1650 x 1130 660
o – –
1560 x 870 x 1000 460
1940 x 1650 x 1130 730
o 1600 x 1040 x 1030 7402420 x 1600 x 1350 1100
o 2790 x 1010 x 1040 10803130 x 1600 x 1350 1600
o 1990 x 990 x 1020 9002420 x 1600 x 1350 1260
–o 2790 x 1010 x 1040 1100
3130 x 1600 x 1350 1620
o 1990 x 990 x 1020 9002420 x 1600 x 1350 1260
–o 2790 x 1010 x 1040 1140
3130 x 1600 x 1350 1660
o 1990 x 990 x 1020 9802420 x 1600 x 1350 1340
–o 2790 x 1010 x 1040 1130
3130 x 1600 x 1350 1650
o 1990 x 990 x 1020 9702420 x 1600 x 1350 1330
o Standard
o Optional
— Not available
*) Effective free air delivery, referenced to atmospheric inlet conditions at discharge pressure – Electrical connection: Compressor unit 400 V, 3 Ph, 50 Hz, solenoid valves 230 V, 1 Ph, 50 Hz, idling control and oil level monitoring standard from N 253-G models and up, optional for N 60-G and N 153-G in combination with control cabinet.1) Sound pressure level as per ISO 2151 and basic standard ISO 9614-2, tolerance: ± 3 dB(A) 2) Sound power level 101db(A); sound power level as per ISO 2151 and basic standard ISO 9614-2, tolerance: ± 3 dB(A)
www.kaeser.com
KAESER KoMPRESSoREn GMbH P.O. Box 2143 – 96410 Coburg – GERMANY – Tel +49 9561 640-0 – Fax +49 9561 640130www.kaeser.com – e-mail: [email protected] P-
480E
D.9/
11 S
pecif
icatio
ns a
re s
ubje
ct to
cha
nge
with
out n
otice
Choose the required grade of treatment according to your fi eld of application:
Sterile blowing air
PET painting systems
Control air
Air treatment using a refrigeration dryer (pressure dew point +3 °C)
Solids Oil BacteriaWater
Simple blowing air
Coarse-filter cleaning
No quality requirements
Application examples: Selection of treatment classes to ISO 8573-1
FG
FF
FE
ED HPDC
Airreceiver
N
Aquamat
HPRD
AMCS
AMCS
AMCS
AMCS
4-78 5
FSTFB
HPRDFilter
Air receiver
Installation for heavily fluctuating air
demand
1
2
6 4 4
4 21
41 1
4 11
1 4 1
Compressed air supply from the low-pressure network; required compressed air quality at booster inlet as per ISO 8573-1, otherwise a centrifugal water separator or air receiver with FC pre-fi lter necessary (particle separation>1 µm, remaining oil <1 mg/m³)
Moisture dependent on pressure dew point, low-pressure network and the booster compression ratio
1
2
Solids
2
Oil
34
Water
KA
ES
ER
KA
ES
ER
KA
ES
ER
KA
ES
ER
KA
ES
ER
KA
ES
ER
KA
ES
ER
Solid particles / dust
ClassMax. particle count per m³ of a particle size
with d [µm]*
0.1 ≤ d ≤ 0.5 0.5 ≤ d ≤ 1.0 1.0 ≤ d ≤ 5.0
0 e.g. Consult KAESER regarding pure air and cleanroom technology
1 ≤ 20,000 ≤ 400 ≤ 102 ≤ 400,000 ≤ 6,000 ≤ 1003 not defi ned ≤ 90,000 ≤ 1,0004 not defi ned not defi ned ≤ 10,0005 not defi ned not defi ned ≤ 100,000
Class Particle concentration Cp [mg/m³]*
6 0 < Cp ≤ 57 5 < Cp ≤ 10X Cp > 10
Water
Class Pressure dew point [°C]
0 e.g. Consult KAESER regarding pure air and cleanroom technology
1 ≤ – 70 °C2 ≤ – 40 °C3 ≤ – 20 °C4 ≤ + 3 °C5 ≤ + 7 °C6 ≤ + 10 °C
Class Concentration of liquid waterCW [g/m³]*
7 CW ≤ 0.58 0.5 < CW ≤ 59 5 < CW ≤ 10X CW ≤ 10
Oil
Class Total oil concentration(fl uid, aerosol + gaseous) [mg/m³]*
0 e.g. Consult KAESER regarding pure air and cleanroom technology
1 ≤ 0.012 ≤ 0.13 ≤ 1.04 ≤ 5.0X > 5.0
Explanation
N BoosterED ECO DRAINHPRD High pressure refrigeration dryerFE / FF Microfi lterFG Activated carbon fi lterAMCS Airmain charging system
HPDC High pressure decompression chamberAquamat Aquamat
Compressed air quality classes to ISO 8573-1(2010):
*) At reference conditions 20°C, 1 bar(a), 0% humidity