Civil 760 주요개정내용 - engineering-eye
Transcript of Civil 760 주요개정내용 - engineering-eye
Civil 760 주요개정내용
MIDAS IT 2009. 01
主要改訂内容
V741~760
MIDAS Civil Integrated Solution SystemFor Bridge and Civil Structure 2009 Upgrade
Pre/Post ProcessPre/Post Process1. Support 및 Point Spring Support 화면 표시 옵션 추가
2. 도로교 설계기준 개정에 따른 강종 추가
3. Winkler Spring 기능 추가 (Surface Spring Support)
4. Online Help 구동 방법 변경
5. Tendon Profile Import
MIDAS Civil Integrated Solution SystemFor Bridge and Civil Structure 2009 Upgrade
Pre/Post Process
• 직관적인 경계조건 표시 방법을 추가하여, 경계조건의 상태
를 보다 쉽게 파악할 수 있음
1. Support 及び Point Spring Support画面表示オプション追加
• Support 및 Point Spring 화면 표시 방법 추가
Upgrade Contents
Effects & Usage
View > Display
SupportSupport
Model > Boundaries > Define Constraint Label Direction
既存境界条件表示方法既存境界条件表示方法
Point Spring SupportPoint Spring Support
SupportPoint Spring Support
MIDAS Civil Integrated Solution SystemFor Bridge and Civil Structure 2009 Upgrade
Pre/Post Process
3. Winkler Spring 機能追加(Surface Spring Support)
•지중구조물 설계시 정확한 경계조건을 반영
• 기존 Spring Support에 대한 기능 보완한 지반 스프링 모델링 기능을 추가
Upgrade Contents
Effects & Usage
Model > Boundaries > Surface Spring Support
FrameFrame Planar (Face)Planar (Face) SolidSolid
MIDAS Civil Integrated Solution SystemFor Bridge and Civil Structure 2009 Upgrade
Pre/Post Process
• 홈페지이에서 도움말 파일을 내려받을 필요 없이, 웹 브라
우저를 통해 항상 최신의 도움말 참조 가능(인터넷 연결 필
요)
4. Online Help駆動方法変更
• Web Page 형식의 Online 도움말 제공
Upgrade Contents
Effects & Usage
Help > Contents
Online Manual in Web BrowserOnline Manual in Web Browser
Tools > Preference
既存形態のヘルプ(インターネットが繋がってない場合)既存形態のヘルプ(インターネットが繋がってない場合)
MIDAS Civil Integrated Solution SystemFor Bridge and Civil Structure 2009 Upgrade
Pre/Post Process
• dxf로 작성된 Tendon 형상을 쉽고 빠르게 Civil 데이터로 변환
• 많은 수의 Tendon Profile을 일괄처리하여 모델링 시간 대폭 단축
5. Tendon Profile Import
• Dxf파일로부터 텐던형상을 불어와 Tendon Profile을정의하는 기능
Upgrade Contents
Effects & Usage
Tools > Tendon Profile Generator
Tendon Profile GeneratorTendon Profile Generator
Civil 2009で Importした Tendon ProfileCivil 2009で Importした Tendon Profile
MCT 形式の Tendon Profile 情報MCT 形式の Tendon Profile 情報
Dxf形式の Tendon ShapeDxf形式の Tendon Shape
2009 UpgradeMIDAS Civil Integrated Solution SystemFor Bridge and Civil Structure
AnalysisAnalysis1. Eurocode에의한시간의존적재질특성계산
2. Creep/Shrinkage의 CEB-FIP(1978) Code 추가
3. IRC:18-2000 기준에의한시간의존적재질특성계산
4. 구조물 최대질량자유도개수를고려한최대 고유모드수 자동반영
5. Rigid Link의 Slave 절점 반력출력옵션
6. 좌굴 해석시 Sturm Sequence 및 Load Factor의 탐색범위설정
7. Cable Efficiency 출력
2009 UpgradeMIDAS Civil Integrated Solution SystemFor Bridge and Civil Structure
Analysis
1. Eurocodeによる時間依存的材質特性計算
Model> Properties > Time Dependent Material (Creep/Shrinkage)Model> Properties > Time Dependent Material (Comp.Strength) Load > Prestress Load > Tendon Property
• Eurocode2에 의해 콘크리트의 크리프/건조수축, 강도발현과 텐던의 Relaxation을 계산하는 기능 추가
Upgrade Contents
Creep-Shrinkage FunctionCreep-Shrinkage Function
Compressive Strength Development with TimeCompressive Strength Development with Time Tendon RelaxationTendon Relaxation
2009 UpgradeMIDAS Civil Integrated Solution SystemFor Bridge and Civil Structure
Analysis
• CEB-FIP(1978)에 의해 콘크리트의 크리프/건조수축, 강도발현을 계산하는 기능 추가
2. CEB-FIP 1978基準による時間依存的材質特性計算
Model> Properties > Time Dependent Material (Creep/Shrinkage)Model> Properties > Time Dependent Material (Comp. Strength)
Upgrade Contents
Creep-Shrinkage FunctionCreep-Shrinkage Function
Compressive Strength Development with TimeCompressive Strength Development with Time
2009 UpgradeMIDAS Civil Integrated Solution SystemFor Bridge and Civil Structure
Analysis
• 사용자가 , 모델링된 구조물에 존재하는 전체 질량 자유도보다 많은고유모드 수를 입력한 경우, 프로그램에서 모델의 전체 자유도 개수를파악하여 해석 가능한 고유모드 수에 대해서만 고유치해석을 수행함.
4.構造物最大質量自由度個数を考慮した最大固有モード数自動反映
Analysis > Eigenvalue Analysis Control
• 구조물의 질량 자유도의 개수를 고유치해석의 최대 모드 수에 반영
Upgrade Contents
Effects & Usage
全体質量自由度 = 246 >使用者入力モード数= 300
Civil 741 Civil 760
Error発生及び解釈中断 警告メッセージ出力後解釈遂行
…
2009 UpgradeMIDAS Civil Integrated Solution SystemFor Bridge and Civil Structure
Analysis
5. Rigid Linkの Slave 節点反力出力オプション
Analysis > Main Control Data
• Rigid Link의 주절점에 지점이 정의된 경우,종속절점에서도 반력을 출력하는 옵션 추가(기존에는 주절점에서만 반력 출력)
Upgrade Contents
Civil 2006Civil 2006 Civil 2009 (従属切点反力出力機能使用時)Civil 2009 (従属切点反力出力機能使用時)
2009 UpgradeMIDAS Civil Integrated Solution SystemFor Bridge and Civil Structure
Analysis
6. 座屈解析時 Sturm Sequence 及び Load Factorの探索範囲設定
Analysis > Buckling Analysis Control
• 좌굴해석시 Sturm Sequence 옵션 추가• 임계하중계수의 범위 설정 기능 추가
Upgrade Contents
Mode Eigenvalue
1 56.49929
2 57.61738
3 69.3207
4 70.54121
5 119.1424
6 119.7788
7 145.7739
8 146.4525
9 216.0261
10 228.6329
Mode Eigenvalue
1 119.1424
2 119.7788
3 145.7739
4 146.4525
Civil 2006Civil 2006
Civil 2009(임계하중계수 범위 설정,100~200)
Civil 2009(임계하중계수 범위 설정,100~200)
2009 UpgradeMIDAS Civil Integrated Solution SystemFor Bridge and Civil Structure
Analysis
7. Cable Efficiency 出力
Result > Result Table > Cable > Cable Efficiency
• 케이블 교량 해석시 Cable 부재의 Efficiency를 테이블 형태로 출력
Upgrade Contents
• 케이블 부재에 대한 Efficiency를 빠르고 쉽게 파악할 수 있음• 해석종류에 관계없이 케이블 부재의 Efficiency를 동일 테이블에 출력
Effects & Usage
Cable Efficiency出力テーブルCable Efficiency出力テーブル
LEAKelastic =
⎥⎦
⎤⎢⎣
⎡+
=
3
22
121
TEALwL
EAKernst
elastic
ernst
KKEfficiency=