"Competitive Aficionados: Miriam Raphael and Ed Bethea," by Helene Hovanec
Caruso by Raphael Mausolf.pdf
-
Upload
mariomoreno -
Category
Documents
-
view
223 -
download
0
Transcript of Caruso by Raphael Mausolf.pdf
-
7/30/2019 Caruso by Raphael Mausolf.pdf
1/45
"Caruso" green parrot
Photo-DiagrambyRaphael Mausolf
paper size: at least 30cmpaper type: thin, not too softtime to fold: 1-1,5h
-
7/30/2019 Caruso by Raphael Mausolf.pdf
2/45
step 1 : Fold halfs and diagonals.
step 2 : Mark in half and fold a fourth up to the diagonal.
-
7/30/2019 Caruso by Raphael Mausolf.pdf
3/45
step 3 : Fold edge along the precreased line.
step 4 : Fold eighths up to the diagonal creases.
-
7/30/2019 Caruso by Raphael Mausolf.pdf
4/45
Step 5 : Fold eighths to connect the diagonal creases.
Step 6 : Repeat steps 2 to 5 on the other half.
-
7/30/2019 Caruso by Raphael Mausolf.pdf
5/45
step 7 : Turn the paper 135 clockwise.
step 8 : Fold a line connecting the two indicated points.
-
7/30/2019 Caruso by Raphael Mausolf.pdf
6/45
step 9 : Fold a quarter up to the intersection.
step 10 : Mountain-fold edge to the former line.
-
7/30/2019 Caruso by Raphael Mausolf.pdf
7/45
step 11 : Repeat steps 9 and 10 on the other side.
step 12 : Collapse the precreased lines.
-
7/30/2019 Caruso by Raphael Mausolf.pdf
8/45
step 13 : Open-sink in and out along the precreased lines.
step 14 : Collapse precreased lines.
-
7/30/2019 Caruso by Raphael Mausolf.pdf
9/45
step 15 : Fold the corner to the top.
step 16 : Open up and squash along diagonals.
-
7/30/2019 Caruso by Raphael Mausolf.pdf
10/45
step 17 : Fold the layers to the left and squash the top.
step 18 : Squash the corner-flap.
-
7/30/2019 Caruso by Raphael Mausolf.pdf
11/45
step 19 : Fold inside along the bisectors.
step 20 : Turn the model over and squash the flap.
-
7/30/2019 Caruso by Raphael Mausolf.pdf
12/45
step 21 : Petal-fold.
step 22 : Open up the whole part.
-
7/30/2019 Caruso by Raphael Mausolf.pdf
13/45
step 23 : Squash and collapse along the precreased lines.
step 24 : Squash and collapse along the precreased lines.
-
7/30/2019 Caruso by Raphael Mausolf.pdf
14/45
step 25 : Pull out the hidden part and look at the top part now.
step 26 : Squash the top along the precreased lines.
-
7/30/2019 Caruso by Raphael Mausolf.pdf
15/45
step 27 : Turn the model over.
step 28 : Open up the box-pleated part.
-
7/30/2019 Caruso by Raphael Mausolf.pdf
16/45
step 29 : Pull one pleat out and make a transition unit.
step 30 : Collapse the boxpleating and the transition unit.
-
7/30/2019 Caruso by Raphael Mausolf.pdf
17/45
step 31 : Squash the bulb to form another transition-unit.
step 32 : Fold down again and collapse boxpleat-part completely.
-
7/30/2019 Caruso by Raphael Mausolf.pdf
18/45
step 33 : Repeat step 29 to 32 on the other side.
step 34 : Fold bisector.
-
7/30/2019 Caruso by Raphael Mausolf.pdf
19/45
step 35 : Pull out the hidden paper.
step 36 : Pleat until it lies flat, to make the feathers.
-
7/30/2019 Caruso by Raphael Mausolf.pdf
20/45
step 37 : Repeat step 35 and 36 on the other side.
step 38 : Fold down one flap.
-
7/30/2019 Caruso by Raphael Mausolf.pdf
21/45
step 39 : Fold edges inside and another flap down.
step 40 : Turn the model over.
-
7/30/2019 Caruso by Raphael Mausolf.pdf
22/45
step 41 : Closed-sink the first layer.
step 42 : Reverse-fold along the upper layer.
-
7/30/2019 Caruso by Raphael Mausolf.pdf
23/45
step 43 : Reverse-fold along the edge.
step 44 : Reverse-fold along the upper layer.
-
7/30/2019 Caruso by Raphael Mausolf.pdf
24/45
step 45 : Repeat 42 to 44 on the other two layers.
step 46 : Repeat steps 41 to 45 on the other side.
-
7/30/2019 Caruso by Raphael Mausolf.pdf
25/45
step 47 : Fold up the flaps.
step 48 : Fold in 30 angle to the right, opening the middle part.
-
7/30/2019 Caruso by Raphael Mausolf.pdf
26/45
step 49 : Reverse-fold in and out to form the leg.
step 50 : Repeat step 48 and 49 on the other side.
-
7/30/2019 Caruso by Raphael Mausolf.pdf
27/45
step 51 : Turn the model over.
step 52 : Crimp to make the wings overlap each other.
-
7/30/2019 Caruso by Raphael Mausolf.pdf
28/45
step 53 : Crimp again, this time at a wider angle.
step 54 : Turn the model over.
-
7/30/2019 Caruso by Raphael Mausolf.pdf
29/45
step 55 : Pull down the top extending the existing crease,the model wont lie flat from now on.
step 56 : Fold up again where the crease hits the edge.
-
7/30/2019 Caruso by Raphael Mausolf.pdf
30/45
step 57 : Turn the model over.
step 58 : Fold down the flap.
-
7/30/2019 Caruso by Raphael Mausolf.pdf
31/45
step 59 : Crimp in 45 angle.
step 60 : Flatten the top part.
-
7/30/2019 Caruso by Raphael Mausolf.pdf
32/45
step 61 : Pull out until the two edges align.
Step 62 : Squash the flaps.
-
7/30/2019 Caruso by Raphael Mausolf.pdf
33/45
step 63 : Petal-fold to form nearly round eyes.
step 64 : Pull out the corner again and look from the front.
-
7/30/2019 Caruso by Raphael Mausolf.pdf
34/45
step 65 : Valley-fold aligning the edges, look from the top now.
step 66 : Push to bring the two halfs of the head together.
-
7/30/2019 Caruso by Raphael Mausolf.pdf
35/45
step 67 : Process of folding.
step 68 : Crimp and fold the whole model on half.
-
7/30/2019 Caruso by Raphael Mausolf.pdf
36/45
step 69 : Reverse-fold to form the lower beak, the model wont lieflat at the part where the fold reaches the legs.
step 70 : Crimp lower beak.
-
7/30/2019 Caruso by Raphael Mausolf.pdf
37/45
step 71 : Crimp beak to align with the edge and open sink the tip.
step 72 : Fold inside.
-
7/30/2019 Caruso by Raphael Mausolf.pdf
38/45
Step 73 : Fold the corner inside to hide it and lock the beak.
Step 74 : Shape the head to be round and voluminous.(the best way to do this is putting a crumpled tissue inside it)
-
7/30/2019 Caruso by Raphael Mausolf.pdf
39/45
step 75 : You may have to use MC to make the halfs of the lower beakhold together. Look at the legs now.
step 76 : Fold the first and the fourth toe to the left.
-
7/30/2019 Caruso by Raphael Mausolf.pdf
40/45
step 77 : Crimp the other two toes to face forward.
step 78 : Fold behind to make the leg thin.
-
7/30/2019 Caruso by Raphael Mausolf.pdf
41/45
step 79 : Rabbit-ear every toe.
step 80 : Crimp the tips of every toe to form claws.
-
7/30/2019 Caruso by Raphael Mausolf.pdf
42/45
step 81 : Repeat steps 76 to 80 on the other leg. Look at the tail now.
step 82 : Fold back to form a thinner tail.
-
7/30/2019 Caruso by Raphael Mausolf.pdf
43/45
step 83 : Crimp to form two tail-feathers.
step 84 : Fold behind.
-
7/30/2019 Caruso by Raphael Mausolf.pdf
44/45
step 85 : Crimp to form another row of feathers.
step 86 : Fold behind.
-
7/30/2019 Caruso by Raphael Mausolf.pdf
45/45
step 87 : Bring the whole model into a round shape.