bts 3012 hw

7/13/2019 bts 3012 hw

1/13

eWSE GSM-R 5.0 BTS3012

Configuration Principles

Issue V1.0

Date 2013-02-25

HUAWEI TECHNOLOGIES CO., LTD.

7/13/2019 bts 3012 hw

2/13

Issue V1.0 (2012-03-24) Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

i

Copyright Huawei Technologies Co., Ltd. 2012. All rights reserved.

No part of this document may be reproduced or transmitted in any form or by any means without prior

written consent of Huawei Technologies Co., Ltd.

Trademarks and Permissions

and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.

All other trademarks and trade names mentioned in this document are the property of their respective

holders.

Notice

The purchased products, services and features are stipulated by the contract made between Huawei and

the customer. All or part of the products, services and features described in this document may not be

within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements,

information, and recommendations in this document are provided "AS IS" without warranties, guarantees or

representations of any kind, either express or implied.

The information in this document is subject to change without notice. Every effort has been made in the

preparation of this document to ensure accuracy of the contents, but all statements, information, and

recommendations in this document do not constitute a warranty of any kind, express or implied.

Huawei Technologies Co., Ltd.

Address: Huawei Industrial Base

Bantian, Longgang

Shenzhen 518129

People's Republic of China

Website: http://www.huawei.com

Email: [email protected]

7/13/2019 bts 3012 hw

3/13


Configuration Principles About This Document



ii

About This Document

Change History

Date Issue Description Author

2012-03-24 V1.0 First draft Yu Yongjun (employee ID: 62404)

7/13/2019 bts 3012 hw

4/13


Configuration Principles Contents



iii

Contents

About This Document .................................................................................................................... ii1 Introduction.................................................................................................................................... 1

1.1 Overview ............................................................... ................................................................. .......................... 11.2 Version Difference ............................................................ ................................................................. ............... 11.3 Application Overview ................................................................................................. ..................................... 1

2 Product Configurations ................................................................................................................ 22.1 Hardware Configurations ....................................................................................................... .......................... 22.2 License Configuration ................................................................................................. ..................................... 8

7/13/2019 bts 3012 hw

5/13


Configuration Principles 1 Introduction



1

1 Introduction1.1 Overview

This document describes GSM-R 5.0 BTS3012.

1.2 Version DifferenceBTS3012 V301R013C00 is the first BTS3012 version that matches GSM-R V100R005C00(GSM-R 5.0).

GSM-R 5.0 is the solution version which maps BTS3012 V301R013C00.

1.3 Application OverviewThe BTS3012 belongs Huawei double-transceiver BTS family. It has strong coveragecapacity and adopts the intelligent low-consumption design, which reduces the capital

expenditure (CAPEX) and operating expense (OPEX) of telecom operators. The BTS3012

provides solutions for the GSM-R radio access network, aiming at meeting telecom operators'various requirements in different network environments.

7/13/2019 bts 3012 hw

6/13


Configuration Principles 2 Product Configurations



2

2 Product Configurations2.1 Hardware Configurations

BTS3012 Cabinet Configuration

Table 2-1Cabinet package (mandatory)

Model Description Function Configuration Principle

GR1B48RACK02 BTS3012 cabinet

(DC 48 V)48 V cabinet One of the two types of cabinets in

this package must be configured on a

site. Only one type of cabinet can be

configured for each site.GR1B24RACK02 BTS3012 cabinet

(DC +24 V)+24 V cabinet

Table 2-2Processing module package (mandatory)


GM1D00DTMU0

0Main control unit Provides the

main control,

E1 surgeprotection,

and extendedsignal input

functions.

In backup mode, two main control

units are configured for each site. In

non-backup mode, one main controlunit is configured for each site.

7/13/2019 bts 3012 hw

7/13





3

Table 2-3RF module package (mandatory)


GR1M9RDTRU

02

RGSM radio package

(1 DTRU, 1 DDPU)

Includes one

double-transceiver unit(DTRU), one

dual-duplexer

unit forDTRU BTS

(DDPU), andthe RF

RX/TX cable

betweenthem.

This package applies to the following

types of sites that use the RGSMfrequency band:

S1 (transmit diversity)

S1 (transmit independency)


S1+1 (intra-DTRU backup,transmit independency)

GR1M9DDTRU

02

DCS1800 radio

package (1 DTRU, 1DDPU)

Includes one

DTRU, oneDDPU, and

the RFRX/TX cable

between

them.


types of sites that use the DCS1800frequency band:




S1+1 (intra-DTRU backup,transmit independency)

GR1M9RDTRU

05

RGSM radio package

(2 DTRU, 1 DDPU)

Includes two

DTRUs, oneDDPU, and

RF RX/TXcablesbetween

them.



S2 (PBT, receive independency or

diversity)

S1+1 (PBT, receive independencyor diversity)

S3 (transmit combination, receive

diversity)


diversity)

S2+2 (transmit combination,

receive diversity)

7/13/2019 bts 3012 hw

8/13





4


GR1M9DDTRU05

DCS1800 radiopackage (2 DTRU, 1

DDPU)

Includes twoDTRUs, one

DDPU, andrelated cables.

This package applies to the followingtypes of sites that use the DCS1800

frequency band: S2 (PBT, receive independency or

diversity)

S1+1 (PBT, receive independency

or diversity)

S3 (transmit combination, receivediversity)


diversity)


receive diversity)

GR1M9RDTRU

08

RGSM radio package

(2 DTRU, 2 DDPU)

Includes two

DTRUs, twoDDPUs, andrelated cables.




S1+1 (transmit diversity)



S2+2 (transmit independency)

S1/1 (transmit independency)

S1+1/1+1 (transmit independency) S2/2 (transmit independency)

GR1M9DDTRU08

DCS1800 radiopackage (2 DTRU, 2

DDPU)

Includes twoDTRUs, two

DDPUs, andrelated cables.

This package applies to the followingtypes of sites that use the DCS1800

frequency band:


S1+1 (transmit diversity)



S2+2 (transmit independency)


S1+1/1+1 (transmit independency)


7/13/2019 bts 3012 hw

9/13





5


GR1M9RDTRU10

RGSM radio package(3 DTRU, 3 DDPU)

Includes threeDTRUs, three


This package applies to the followingtypes of sites that use the RGSM

frequency band: S2/2/2 (transmit independency)

S1/1/1 (transmit independency)

S1+1/1+1/1+1 (transmitindependency)




GR1M9DDTRU

10

DCS1800 radio

package (3 DTRU, 3

DDPU)

Includes three

DTRUs, three



types of sites that use the DCS1800

frequency band: S2/2/2 (transmit independency)

S1/1/1 (transmit independency)

S1+1/1+1/1+1 (transmitindependency)




GR1M9RDTRU

11

RGSM radio package

(4 DTRU, 2 DDPU)

Includes four

DTRUs, two

DDPUs, and

related cables.


types of sites that use the RGSM

frequency band:

S4 (PBT, receive independency)

S2+2 (PBT, receive independency)

S7/S8 (transmit combination,receive diversity)


receive diversity)

S4+4 (transmit combination,receive diversity)

GM1M9PDTRU

00

BTS3012,

GM5M6DTRU,double transceiverunit, M900

EGSM

DTRU.EGSM band is configured in China.

GM1M9RDDPU00

BTS3012,GM5MEDDPU, dual

duplexer unit forDTRU BTS,

RGSM-TX921-946M

Hz/RX876-901MHz

DDPU forChina.

The DDPU is configured in China.

7/13/2019 bts 3012 hw

10/13





6

Site Types for3012&AE RF Module

Table 2-4Configuration list of installation materials (mandatory)


GM1P0004E101 Trunk cable (75ohm, 4E1, 15 m)

Trunk cableand

connectors.

A maximum of one package isconfigured for each site. Users can

select either of the two models asrequired.

GM1P0004E102 Trunk cable (120ohm, 4E1, 15 m)

Trunk cable.

QWMP000JMP03 Top jumper cableunit for RRUs (cold

areas)

Top jumpercable unit for

RRUs in coldareas.

Two packages are configured for eachDDPU.

QWMP000JMP02 Top jumper cable

unit for RRUs

(non-cold areas)

Top jumper

cable unit for

RRUs in

non-coldareas.

GM3P0INSMT00 Installation

materials for

BTS3012

Includes

cabinet

supports,terminals, andtubes.

One package is configured for each

site.

Table 2-5Configuration list of installation materials (optional)


W0DCPSU00 PSU module

(DC/DC)

24 V embedded

power system

(DC/DC powermodule).

The power supply unit (PSU)

module is configured when the

+24 V cabinet is used. A cabinetin full configuration houses twoPSU modules by default, and

users can configure a maximum

of four PSU modules for such acabinet.

GM1D00DPTU00 GBTS packet

processing unit

Supports IP

transmission.

The GBTS packet processing

unit is configured when IPtransmission is required. One

unit is configured for every twocabinets (each cabinet group).

7/13/2019 bts 3012 hw

11/13





7


GM1D00DABB00 Abis bypassboard

E1 bypass board. When the E1 bypass function isrequired, one E1 bypass board

must be configured.GR1M0000GU00 GPS processing

unit

Includes the RT GPS

satellite card.

The GPS processing unit is

configured by default when the

RT GPS satellite card is used.Each RT GPS card requires one

GPS antenna system. Amaximum of one GPS

processing unit is configured.

DDF-24EAC Extended alarm

package for

DTMU

Provides six inputs of

alarm signals and

excludes sensors.

Users can select either of the

two models as required. One

package is configured for each

site.GM1P00IEMU00 Indoor alarm box

for theenvironmentmonitoring unit

for DTRU BTS(DEMU)

Provides 32 inputs of

alarm signals andexcludes sensors.Among them, 14

routes are for surgeprotection.

GM1XEMUSEN01 Sensors for

environmentmonitoring

module

Includes the smoke,

liquid,temperature/humidity,

and door statussensors.

One package is configured for

each site that requires sensorswhen users select the indoor

alarm box of DEMU.

GR1X00OAMP00 Wire layout

package forexternal alarm

monitoring

Includes the DDF box

and twisted-paircables.

If required, one package is

configured when users select theextended alarm package for

DTMUor indoor alarm box ofDEMU.

GM1X00IDDF01 Indoor DDF box(75 ohm, 8E1)

Indoor 75 ohm DDF Either of the two models isconfigured based on the requiredquantity. One DDF box is

recommended for each newindoor site.

GM1X00IDDF02 Indoor DDF box

(120 ohm, 8E1)

Indoor 120 ohm

DDF.

E000ICL00 Indoor cableladder (2.5 m) Indoor cable ladder. If required, two indoor cableladders are recommended foreach new indoor site.

WDCDBOX01 Outdoor cable

ladder (2.5 m)Outdoor cable ladder. If required, two outdoor cable

ladders are recommended for

each new indoor site.

E000IGU00 Ground unit Ground bar. If required, one ground unit is

recommended for each new site.

EFEDWID01 Feeder window Feeder window. If required, onefeeder window

is recommended for each new

indoor site.

7/13/2019 bts 3012 hw

12/13





8

2.2 License ConfigurationTable 2-6License configuration


GMMS0DUALT00 Dual transceiver

(per TRU)

Dual

transceiver

license

By default, each DTRU supports one

carrier. One double-transceiver license

is required for the DTRU that supportstwo carriers.

GMMS0000HP00 High power (per

TRU)

High power

license

When the DTRU is used as a 60 W

carrier, each carrier is configured with

a high power license.

GMMS000PBT00 PBT (per TRX) PBT license One PBT license is configured for the

DTRU supporting the PBT function.

The PBT license cannot be configured

with the dual transceiver license ortransmit diversity license for one

DTRU.

GMMS0000TD00 Transmit diversity

(per TRX)

Transmit

diversity

license

One license is configured for each

DTRU supporting transmit diversity. In

this case, each DTRU can be used asone carrier.

The transmit diversity license cannot beconfigured with the dual transceiverlicense for one DTRU.

GMMS0004WD00 4-way receivediversity (per TRX)

4-way receivelicense

One license is configured for eachDTRU supporting 4-way receivediversity. In this case, each DTRU can

be used as one carrier.

The 4-way receive diversity licensecannot be configured with the dual

transceiver license for one DTRU.

The 4-way receive diversity licensemust be used with the PBT license ortransmit diversity license.

7/13/2019 bts 3012 hw

13/13


Configuration Principles A Acronyms and Abbreviations



9

A Acronyms and AbbreviationsB

BSC base station controller

BSS base station sub-system

BTS base transceiver station

D

DABB Abis bypass board for DTRU BTS

DAFU antenna front-end unit for DTRU BTS

DDPU dual-duplexer unit for DTRU BTS

DELC E1 signal lightning-protection card for DTRU BTS

DELU E1 signal lightning-protection unit for DTRU BTS

DEMU environment monitoring unit for DTRU BTS

DGPS GPS processing unit for DTRU BTS

DMLC monitor signal lightning-protection card for DTRU BTS

DMLU monitor signal lightning-protection unit for DTRU BTS

DTMU transmission & timing & management unit for DTRU BTS

DTRU double-transceiver

bts 3012 hw

Documents

Transcript of bts 3012 hw