7/27/2019 Btn 200604084

http://slidepdf.com/reader/full/btn-200604084 1/3

SUMMARY: Over 4 years of experience in Embedded systems Design and trouble shootingof Electronic Circuits.

OPT\ SYSTEMS Windows, DOS, Red Hat Linux

S|W KNOWN Pascal, C, C++, Visual BasicTOOLS Dynamic C, Keil V7.06

UCONTROLER  Atmel 89C51, Rabbit 2000, Arm AT91M55800A

APP/PACKAGES Pads powerlogic, Orcad 9.2, CAM350, Gerbtool

Work Experience:

•  Celetronix India PVT LTD (May 2001-till date)

•  Electronics corporation of India LTD. [ECIT-ECIL]

•  Transworks information services.

•  BARC Trombay (trainee).•   NIIT Bhayender (Faculty).

FUNCTIONAL AREA OF EXPERIENCE

Presently working as Design Engineer.Projects Handled:

1 Alarm Annunciator

•  Monitoring of Vital process parameters where a change of state can occur.

•  Provide visual and audio warning of fault condition.

•  Record time and date of occurrence, acceptance and clearance of fault.

•  Serial communication between PC and Annunciator.

•  Storage of logged data as a text file on the pc.

Hardware used: Jack Rabbit (BL 1810) board, field contacts, Buzzer, LED’s.Software used: Dynamic C V-7.26P.

2 Embedded TCP/IP Stack development.

•  Simple TCP/IP stack development over a Linux environment.

•  Implementation of Ethernet, ARP, IP, TCP and UDP headers for stack.

•  Socket programming used at application layer.

•  Implementation of software checksum.

7/27/2019 Btn 200604084

http://slidepdf.com/reader/full/btn-200604084 2/3

•  Implementation of application layer commands like Ping.

Hardware Used: Jack Rabbit (RCM 2200) Development board, x86 based machine, Hub,Ethernet card, UTP cables.

Software Used: GCC, Dynamic C V7.26SE

3 Temperature Monitoring System.•  Edit real time and date.

•  Read time and date and store it on serial EEPROM.

•  Display temperature, and date on PC and LCD.

•  Software Interrupt based triggering for max-min temperature values.

4 Other Hardware & Software projects .

•  Design of DDR-SDRAM Burn-in board.

•  Design of automated Power Transformer coil winder.

•  Design of SMPS tester (Automatic debugger) for Echostar satellite Receiver.•  I have worked on World Class SMPS designs (Resonant topology with boost and doubler Circu

Also worked on SMPS with PFC topology.•  Working on Smart card readers (HID) Maxiprox and Proxpoint.•  I have worked on ClassAB, ClassD Amplifiers (Mitek).•  Also I have worked on Echostar Satellite receivers (DTH).•  I have also worked on Set Top Box. (C.A.S).

Transworks Information Services limitedI have worked as customer support engineer in Transworks information Services LTD. The

 project was of online technical support for Gateway computer customers. The work involved was of understand the customer ’s problem and provide him with the best technical solution and ensuring

 proper follow up.

Training in BARCI had in plant training in Instrumentation department of BARC (Bhabha Atomic Research

center RSMD Cirus). In BARC I have worked on following projects.1. Making of ‘Pseudo Random Binary Sequence Generator ‘ 

2. Design of different types of active filters (B.A.R.C).

N.I.I.T (Bhayender)I have also worked in N.I.I.T as a Faculty member teaching MSoffice, programming software

and other application software packages.

References: 1.Mr. Kallol Roy (M Tech, PHD Control SYS)

BARC (R .S. M. D Cirus Reactor)2. Mr. R. K. Jain, Electronic Division, BARC.

3. Mr. Kalyanaraman (A.G.M in Celetron India).4. Mr. Devinder Singh (G.M Design Center in Celetron India).

5. Mr. R. S. Sawant, Center Manager, ECIT Matunga.

7/27/2019 Btn 200604084

http://slidepdf.com/reader/full/btn-200604084 3/3

 

Hobbies: Playing Chess, Amateur Power lifting, Group discussion, debating.