Broschure Converter
10
Your contact to FEST Phone: +49 5321 687-0 E-Mail: [email protected] page 1 of 10 Fest converter Air conditioned reversal converter for mill stand drive of 5,8 MW Digital controller: 6RA70-tank Technical data of the drive: Capacity: 5800 kW Armature voltage: 750 V DC Rated current/ Surge current: 8320/21000 A Revolution: 40/190 Upm
-
Upload
vikramtambe -
Category
Documents
-
view
220 -
download
0
Transcript of Broschure Converter
8/3/2019 Broschure Converter
http://slidepdf.com/reader/full/broschure-converter 1/10
Your contact to FEST
Phone: +49 5321 687-0
E-Mail: [email protected]
page 1 of 10
Fest converter Air conditioned reversal converter for mill stand drive of 5,8 MW
Digital controller: 6RA70-tank
Technical data of the drive:
Capacity: 5800 kWArmature voltage: 750 V DCRated current/Surge current: 8320/21000 ARevolution: 40/190 Upm
8/3/2019 Broschure Converter
http://slidepdf.com/reader/full/broschure-converter 2/10
Your contact to FEST
Phone: +49 5321 687-0
E-Mail: [email protected]
page 2 of 10
FEST converter - water cooled
Convincing technology:
Compact and easy to maintain power section under application of EUPEC-modules
Cut out change forefront and cabin change back side Highest packing density through water cooling with open and closed cooling circuit.
Ordinary industrial water or tap water as coolant for the thyristor cells, deionised water is not necessary.
Application of digital energizing device of the newest generation type Simoreg CM
Fast data link to the separate field speed device from Siemens
Profibus- and Simolink–data link for the superordinate SPS-controller
Technology functions (speed calculation, tension control among other things)
realisable drive near in the controller Armature voltage up to 1500 V
Parallel connection of two6-puls bridges assembling of a12 pulsing balance coil feed for direct current motors of 3,5 MV
8/3/2019 Broschure Converter
http://slidepdf.com/reader/full/broschure-converter 3/10
Your contact to FEST
Phone: +49 5321 687-0
E-Mail: [email protected]
page 3 of 10
Technical details:
Detail views of the backside cooling water stream
8/3/2019 Broschure Converter
http://slidepdf.com/reader/full/broschure-converter 4/10
Your contact to FEST
Phone: +49 5321 687-0
E-Mail: [email protected]
page 4 of 10
Technical details:
Water hoses to the individualEUPEC-cells
8/3/2019 Broschure Converter
http://slidepdf.com/reader/full/broschure-converter 5/10
Your contact to FEST
Phone: +49 5321 687-0
E-Mail: [email protected]
page 5 of 10
FEST converter
Comparison air-/water cooled in the constructive assembling
Service opening on the backside of the cabinet with 6 capacity cells, which can be extracted individually.Depth of the control cabinet: 1000 mm.
Accessibility of the water cooling from thebackside and the cutout from ahead.Depth of the control cabinet: 600 mm.
8/3/2019 Broschure Converter
http://slidepdf.com/reader/full/broschure-converter 6/10
Your contact to FEST
Phone: +49 5321 687-0
E-Mail: [email protected]
page 6 of 10
Modernisation of a rolling mill
Modernisation of the rolling mill KME Osnabrück, Germany
8/3/2019 Broschure Converter
http://slidepdf.com/reader/full/broschure-converter 7/10
Your contact to FEST
Phone: +49 5321 687-0
E-Mail: [email protected]
page 7 of 10
Profil rolling millAngang New Steel (China)
Scope of delivery:
Automation equipment
Visualisation system
DC-Thyristor feed for 3 rolling mill drives
Universal-CCS-rack consisting of universal racks and an intermediary edger for rolling of bars, beams and other profiles
8/3/2019 Broschure Converter
http://slidepdf.com/reader/full/broschure-converter 8/10
Your contact to FEST
Phone: +49 5321 687-0
E-Mail: [email protected]
page 8 of 10
HMI for universal rack assemblyof a section rolling mill
Roughing stand, edger and finishing stand
8/3/2019 Broschure Converter
http://slidepdf.com/reader/full/broschure-converter 9/10
Your contact to FEST
Phone: +49 5321 687-0
E-Mail: [email protected]
page 9 of 10
HMI for rolling mill drive in the project section rolling mill Kardemir
12-pulse balance coil feed for edger stand
8/3/2019 Broschure Converter
http://slidepdf.com/reader/full/broschure-converter 10/10
Your contact to FEST
Phone: +49 5321 687-0
E-Mail: [email protected]
page 10 of 10
Hot rolling mill for copper KM Europa Metall AG Osnabrück, Germany
Scope of delivery:
Settlement of the project
Electrical equipment
Complete automation with S7
DC-thyristor feed for roll drive, edger, warm coiler, on controls, roller table,tube edge guide
Assembly
Commissioning and efficiency test in only 3 weeks installation downtime
Duo reversing hot rolling mill with upstream edger
