Beverage Management
Transcript of Beverage Management
Types of Beverage Operations
Beverage-only establishments Sales focus on beverage Finger foods served
Bar/entertainment combinations Consumer draw is entertainment Sales focus on beverage Finger foods served
Food and Beverage Combinations
Most common form of operation
Varies in degree based on concept
Hotel Beverage Operations F & B combination Beverage only Bar & entertainment
combination Room service / mini-bars Banquets
Bar Classifications Front Bar: Beverages are served
directly to the guest. Service Bar: Beverages served to
servers who then serve the cocktail to the guest.
Portable Bar or Mobile Bar: Used for on or off-premise catering functions.
Mini Bar Or Honor Bar: available to the guest in their room with charges based on usage.
The physical layout of the bar operation begins with the concept.
The concept will dictate… The type of brands and drinks to be
offered. The type of guest. The style of service. The function and location of the bar areas.
A properly planned bar will allow for the highest productivity and therefore generate the highest profits.
A poorly planned bar will cost money in low productivity due to inefficient layout and design.
Front Bar – “The Rail” Under Bar – “Under the
Rail” Back Bar – Presentation
Area – Storage.
Underbar: Section beneath the front bar, where most equipment and supplies are kept.
Speed Rack: Rail attached to the front of the cocktail station which holds the most frequently poured liquors. Well-brands, call-brands
and premiums. Ice Bins and Wells:
“Jockey Boxes”. Sinks and Refrigeration:
Three-compartment.
The Back Bar has two main functions, decoration and storage.
Decorative - Mirrors, shelves, lighting.
Spacing – Back bar to the under bar - 3 feet.
Storage – Glassware, call and premium name bottles and POS systems.
Flooring – Non-porous (quarry tile), non-skid and easy to clean (1/4” rubber mats).
Cocktail / Pouring Station Ice bins - Stores ice to make drinks and houses
the cold plate. Bottle wells (“Jockey Boxes”) - Chilled areas
adjacent to the ice bin used to hold juices and mixes.
Speed rails (well) - Holds house brands. Speed rails (call) - Holds call brands. Well brands are less expensive spirits used first
tier of ordering a drink. Such as: Gin & tonic, Scotch & water.
Call brands are spirits requested by the guest such as: Bombay & tonic or Dewars & water.
Blender Station Attached to cocktail / pouring
station. Contains a blender, dump sink,
and additional speed rails.Handgun Post-mix system: Syrup and
carbonated water mixed as they are dispensed.
Pre-mix system – Beverage is complete, bubbles are added using CO2.
Bottles – Purchased already mixed, ready to use.
Standard/Tap – Dispenses the beer. Merchandising handles.
Insulated Lines – Connects the keg to the tap.
Types of systems: CO2 enters and beer exits
from the top of the key. CO2 enters at the top and
beer exits from the bottom of the keg.
Other refrigeration Glass chillers, chest coolers
July 2010
Three basic parts of glassware:Bowl – Area to hold the beverage.Stem – Attaches the bowl to the base or foot.Base or Foot – Supports the glass on a flat surface.
Three Types of Glassware Tumblers: Flat-bottomed
glass that is a bowl without a stem or foot (rocks, highball).
Footed Glassware: Bowl sits directly on the base or foot (brandy, beer).
Stemware: Any glassware having a bowl, foot, and a stem (wine).
For mixing and pouring… Jiggers: Used for measuring
liquors. Pourers: Fits into the neck of
the bottle to control beverage flow.
Mixing Glass: For mixing beverages with ice.
Hand Shakers: Mixing glass plus stainless steel mixing cup (mixing beverages with ice).
Bar Strainer: Round wire spring on a handle (ice and fruit pulp).
Bar Spoon: Equals one teaspoon. Used for stirring drinks.
Ice Scoops: Come in 6 – 8 oz sizes.
Muddler: A wooden tool to crush ingredients.
Fruit Squeezer: To remove the juice from fresh fruits.
Funnels: Used to transfer liquids.
Condiment Tray: Multi-compartment container which holds fresh fruit/garnish.
Cutting Board: For cutting fruit/garnish.
Bar Knife: A small paring or utility knife.
Relish Fork: Two-tong fork (onions, olives).
Zester: Special cutting tools used for making lemon twists.
For serving… Bottle/can opener
(stainless steel). Corkscrew (stainless steel). Serving trays, 14”-round. Tip tray: Attaches to the
serving tray. Acts as a cash bank for server.
Bartender: To mix and serve drinks.
Bar Back: Assists the bartender with prep, sanitation, and serving of drinks.
Cocktail Server: Beverage service to guests.
Wine Steward (Sommelier): Wine expert.
Beverage Steward: Purchasing, receiving, storing and issuing of all wines and liquors.
Beverage Director or Beverage Manager: Full responsibility for all beverage activities.
Dispensing alcohol directly from the bottle.
Advantages… Customer preferred, speed,
Showmanship. Disadvantages…
Lack of measurement, portion control.
Can be costly.
Most commonly used – Shot glass, jigger.
Calibrated measurer fixed to the top of the bottle.
Advantages… More control,
consistency. Disadvantages…
Slows down service.
Liquor system integrated with the POS system.
Advantages… Control aspect, does
not rely on bartender to ring up sales.
Disadvantages… Guests feel they are
being cheated. Costly.
Ice: Size and shape; cubed, crushed, pillowed.
Base: Primary spirit. Modifying Ingredient: – Soda, juice. Accent: Optional ingredient (sugar,
salt). Garnish: Important component, adds to
visual appeal and taste.
Build: Made in the glass (highball, mixer).
Stir: Mixing glass and served up neat (martini).
Shake: Mixing glass, vigorous mixing (specialty drinks).
Blend: Ingredients that need to be puréed, blended (frozen drinks).
Always use a tray for service. Ensure proper glassware and
garnish. Place cocktail napkin with logo
facing guest. Start clockwise around the
table. Serve women first. Pour beer with the glass on
the table. Two-minute rule applies. Remove empties from the
base or stem.
Liquor – Replenish pars and clean bottles. Well – Organize, as needed. Beer – Replenish bottled and draft. Soda – Sanitize gun. Glassware – Check supply and
cleanliness. Equipment – Checklist and functionality. Serving Accessories – Toothpicks, straws,
napkins.