Approved Manufacturers List - Internal Use Only · PDF fileThe purpose of the Access Midstream...

T-029Rev: 5.4

Rev. Date: 7/13/2015

of 24Electronic documents, once printed or saved, are uncontrolled and may become outdated. For the latest version of the AML, see http://www.accessmidstream.com/VendorRelations/

Index Page

Introduction and General Comments……………………………………………… 2

Contact Information………………………………………………………………… 3

AML

1.0 Pipe - Carbon Steel……………………………………………………………… 5

2.0 Pipe - Stainless Steel……………………………………………………………… 6

3.0 Valves - Carbon Steel…………………………………………………………… 7

4.0 Valves - Stainless Steel…………………………………………………………… 9

5.0 Fittings and Flanges - Carbon Steel…………………………………………… 10

6.0 Fittings and Flanges - Stainless Steel…………………………………………… 13

7.0 Closures…………………………………………………………………………… 15

8.0 Gaskets and Fasteners…………………………………………………………… 16

9.0 Pipe Nipples………………………………………………………………………… 17

10.0 Ancillary Equipment……………………………………………………………… 18

11.0 Strainers…………………………………………………………………………… 19

12.0 Electrical…………………………………………………………………………… 20

13.0 Measurement…………………………………………………………………… 21

14.0 Non-Steel Pipe…………………………………………………………………… 23

Approved Manufacturer ListRev: 5.4

T-029Rev: 5.4

Rev. Date: 7/13/2015


Rev: 5.41)

2)

3)

4)

5)A manufacturer followed by "UNDER EVALUATION" may not be used without written authorization from an Access AML Technical contact listed on the Contact Information page. Authorization to use such manufacturers will be limited as the approval process may require extensive technical review and testing.

Introduction and General Comments

Under Evaluation

http://www.accessmidstream.com/VendorRelations/

Deviations and exceptions to the AML are prohibited without written authorization from an Access AML Technical contact listed on the Contact Information page. Failure to comply with the AML may result in additional cost and/or lost time.

The purpose of the Access Midstream Approved Manufacturer List (AML) is to document the manufacturers of components approved for use in Access' facilities and pipelines. The approval process ensures components meet the minimum specified design requirements. Using components identified on the Access AML helps maintain and improve quality, safety, and traceability within the Access value chain, contributing to Access' vision of zero safety incidents.

The AML may not address all components needed. For questions or feedback regarding certain components or manufacturers, or to request that a new manufacturer be added to the AML, please email the Access AML email address listed on the Contact Information page. Requests to add new manufacturers must come from Access Midstream employees.

The Access AML is a "living document". Updated versions of the AML may be released without notice. Therefore, accessing the AML via the link below is suggested to ensure the latest version of the AML is being used.

http://www.accessmidstream.com/VendorRelations/

T-029Rev: 5.4

Rev. Date: 7/13/2015


Rev: 5.4

Please direct AML questions to the following email address:

[email protected]

AML TECHNICAL CONTACT

Andrew Edelman Facilities Engineer [email protected] Ferrington Sr.Engineer Technician [email protected]

AML SUPPLY CHAIN CONTACT

Mark Bowling Supervisor - Supply Chain [email protected]

SUPPLY CHAIN & ENGINEERING SPONSORS

John Casto Manager - EngineeringSteve Smith Project Manager - Supply Chain

Contact Information

mailto:[email protected]




T-029Rev: 5.4

Rev. Date: 7/13/2015


Pipe Mill Rev: 5.4 Country1.01 ERW - DomesticAmerican Steel Pipe Birmingham, AL USACalifornia Steel Fontana, CA USAEx L Tube Kansas City, KS USANorthwest Pipe Mill Atchison, KS USANorthwest Pipe Mill Bossier City, LA USAParagon Industries Sapulpa, OK USAStupp Corporation Baton Rouge, LA USATenaris (Maverick) Hickman, AR USATenaris (Maverick) Conroe, TX USATenaris (Maverick) Counce, TN USATex-Tube Mill Houston, TX USATMK-IPSCO Blytheville, AR USATMK-IPSCO Camanche, IO USATMK-IPSCO (Newport Steel) Newport, KY USAU.S. Steel (Bellville Tubular Operations) Bellville, TX USAU.S. Steel (McKeesport Tubular Operations) McKeesport, PA USAWheatland Warren, OH USAWheatland Wheatland, PA USAWheatland Sharon, PA USA1.02 ERW - ImportAl-Jazeera Steel Sohar Industrial Est OMANArcelor Mittal International Venezuela Caracas VENEZUELABorusan Birlesik Istanbul TURKEYCayirova Cayirova TURKEYChung Hung (CHS) Kaohsiung TAIWANCorinth Pipeworks Athens GREECEEvraz (formerly IPSCO) Regina CANADA Femco Waseville S AFRICAHusteel Mok'po KOREAHusteel (Daebul) Jeonnam KOREAHusteel (DangJin) Chungnam KOREAHylsa San Nicolas de los Garza MEXICOHyundai Ulsan KOREA JFE (formerly NKK) Chita JAPANJMC Grp-Energex Tube (Lakeside Steel) Welland, ONT CANADAMannesmann Salzgitter Siegen GERMANY Nexteel Pohang City KOREA Nippon Steel Yamaguchi JAPAN Pytco Coahuila MEXICO Seah Pohang City KOREA Tuberia Laguna Durango MEXICO TUNA Nuevo Leon MEXICO1.03 DSAW - DomesticBerg Steel Pipe Corporation Panama City, FL USADura-Bond Steelton, PA USAJSW Steel Baytown, TX USA

1.0 PIPE - CARBON STEELAPI 5L

T-029Rev: 5.4

Rev. Date: 7/13/2015


Pipe Mill Rev: 5.4 Country

1.0 PIPE - CARBON STEELAPI 5L

1.04 SMLS - DomesticMichigan Seamless Tube South Lyons, MI USAPTC Alliance Darlington, PA USATMK-IPSCO (Koppel Steel) Ambridge, PA USAUS Steel Fairfield, AL USAUS Steel Lorain, OH USAV&M Star Youngstown, OH USAWheatland (formerly Sharon) Sharon, PA USA1.05 SMLS - ImportAngang Anshan City CHINAArcelor Mittal Ostrava (Nova Hut) Ostrava CZECH REPUBLIC Arcelor Mittal Roman (Petrotub) Roman ROMANIAArcelor Mittal South Africa (Iscor) Vereeniging S AFRICABenteler Paderborn GERMANYChomutov Chomutov CZECH REPUBLIC Heng Yang Hengyang City CHINAHuta Batory Chorzov POLANDJFE (Kawasaki) Chita JAPANNippon Steel Yamaguchi JAPANSumitomo Metals Wakayama JAPANTenaris Algoma - Canada Sault, Ste. Marie CANADATenaris Daimine Bergamo ITALYTenaris NKK Kawasaki JAPANTenaris Siderca Campanag ARGENTINATenaris Silcotub Zalau ROMANIATenaris Tamsa Veracruz MEXICOTianjin TPCO Tianjin CHINATMK Volzhsky Volzhsky RUSSIAV&M (Mannesmann) Mulheim GERMANYV&M (Mannesmann) Dusseldorf-Rath GERMANYV&M (Mannesmann) Belo Horizonte BRAZILV&M (Vallourec) Aulnoye FRANCEV&M (Vallourec) Saint Saulve FRANCEVoest Alpine Kindberg AUSTRIAZelezlarne Podbrezova Podbrezova SLOVAKIA

T-029Rev: 5.4

Rev. Date: 7/13/2015


Pipe Mill Rev: 5.4 Country2.01 SS ERW PIPEBristol Metals Bristol, TN USABSL T.R. (NPS 10" and above) Soissens FRANCEButting Knesebeck GERMANY

Erne Fittings Mürzzuschlag, Grazerstrasse AUSTRIA

Inoxtech (NPS 8" and up) Lendarinara ITALYJiuli (Tp 304/304L/316/316L NPS 8 to 24) Zhejiang CHINAMach Industries Houston, TX USANas Toa (NPS 14" and up) Kawaskaki JAPANNas Toa (Up to NPS 12") Chigasaki JAPANNippon Metal Tubu Aichi JAPANNisshin Steel Amagasaki JAPANOutokumpu Stainless Wildwood, FL USAOutokumpu Stainless Ontario CANADASitai Inox (Up to NPS 8") Prato Sesia ITALYStainless Pipe Kogyo Sakai JAPANSumikin & Nippon Steel SS Pipe Co Koga JAPANSumitomo Wakayama JAPANSwepco Clifton, NJ USA2.02 SS SMLS PIPECentravis (Up to NPS 10") Nikopol UKRAINEChangshu Walsin Specialty Steel Changshu City CHINAJiuli (Tp 304/304L/316/316L Up to NPS 8") Huzjpi, Zhejiang CHINAKobe Special Tube Chofu-Kita JAPANMannesmann DMV Stainless Houston, TX USAMichigan Seamless Tubes South Lyons, MI USANippon Steel (Up to NPS 6") Hikari JAPANPexco Scranton, PA USAProductos Tubulares Bilbao SPAINRockwell Collins Rollmet (formerly Kaiser) Irvine, CA USASalzgitter Mannesmann DMV Stainless Mülheim an der Ruhr GERMANYSalzgitter Mannesmann DMV Stainless Montbard FRANCESalzgitter Mannesmann DMV Stainless Italia Bergamo ITALYSandvik Sandviken SWEDENSandvik Scranton, PA USASchoeller Bleckman Ternitz AUSTRIASumikin & Nippon Steel SS Pipe Co Fujisawa JAPANSumitomo Wakayama JAPANSumitomo Amagasaki City JAPANTubacex Llodio SPAINWalsin (Tp 304/304L/316/316L Up to NPS 4") Haiyu Town, Jiangsu CHINAWyman Gordon (Precision Castparts Corp.) Houston, TX USA

2.0 PIPE - STAINLESS STEEL- Stainless steel includes TP 304, 316, 321, and 347 materials

T-029Rev: 5.4

Rev. Date: 7/13/2015


Manufacturer Rev: 5.4 Country3.01 BALL VALVEBALON (8" and below) Oklahoma City, OK USACameron (Cameron) Ville Platt, LA USAGROVE (Cameron) Ville Platt, LA USAGROVE (Cameron) Voghera ITALY KF (Circor Energy) Oklahoma City, OK USAKF (Circor Energy) Suzhou CHINAWKM (Cameron) Oklahoma City, OK USA3.02 PISTON CHECK (flanged end) 2"-16"Daniels Houston, TX USADurabla (DFT) Lionville, PA USAKF (Circor Energy) ITALY KF (Circor Energy) CHINAM&J (SPX) Houston, TX USANorriseal Houston, TX USATom Wheatley (Cameron) Edmonton CANADA

BALON Oklahoma City, OK USAFlomore (threaded top end cap) Oklahoma City, OK USAKF (Circor Energy) Oklahoma City, OK USAWheatley (Cameron) Houston, TX USAWhittle & Neher Systems Oklahoma City, OK USA3.04 SWING CHECK (flanged end) KF (Circor Energy) Oklahoma City, OK USAWheatley (Cameron) Houston, TX USA3.05 PIPELINE CHECK (flanged end) API 6D Fully PiggableSPX Houston, TX USAStream-Flo (Crown Judd) Edmonton CANADATom Wheatley (Cameron) Houston, TX USAWheatley (Cameron) Houston, TX USA3.06 WAFER CHECK VALVES (Thick and Thin pattern)Balon Oklahoma City, OK USAKF (Circor Energy) Oklahoma City, OK USAWheatley (Cameron) Houston, TX USA

Bonney Forge Mount Union, PA USADSI (Forum) Dalian CHINADSI (Forum) San Paolo D'Argon ITALY Edward (Flowserve) Raleigh, NC USAKitz Nagasaka JAPAN SMITH (NEWDELL) Houston, TX USAVelan Montreal CANADAVOGT (Flowserve) Sulphur Springs, TX USAVOGT (Flowserve) Marainalai Nagar INDIA

Crane Mexico City MEXICO

3.0 VALVES - CARBON STEEL

3.07 FORGED STEEL API 602 GATE/GLOBE/CHECK VALVES (Threaded, Socket Weld and Flanged)

3.03 SWING CHECK (threaded end) Ductile Iron or Cast Steel

3.08 CAST STEEL API 600 GATE/GLOBE/CHECK VALVES(These valves are not fully pigable and their metal seated design prohibits bubble tight shut-off)

T-029Rev: 5.4

Rev. Date: 7/13/2015


Manufacturer Rev: 5.4 Country


DSI (Forum) Jiang Yin ChinaKitz Ina JAPAN Kitz Kunshan CHINAPowell Cincinnati, OH USAPowell Mexico City MEXICO Velan Williston, VT USAVelan Montreal CANADAVelan Grandby CANADAVelan Lisbon PORTUGALVelan Ansan City KOREAWalworth Mexico City MEXICO 3.09 LUBRICATED PLUG VALVEGalli & Cassina Sorento ITALY Nordstrom (Flowserve) Sulphur Springs, TX USAResun (R&M Energy) Tomball, TX USA3.10 NON-LUBRICATED PLUG VALVEDurco (Flowserve) Cookville, TN USADurco (Flowserve) Ahaus GERMANYTexsteam (Cameron) Hammond, LA USA

SPX Houston, TX USAT-3 assembled in Houston CHINA/USAWKM (Cameron) Ville Platte, LA USA3.12 PIG VALVESArgus Edmonton CANADATiger Valve Company Houston, TX USATulsa Valve (Array) Houston, TX USA3.13 OVER PRESSURE PROTECTIONAnderson Greenwood (Tyco) Houston, TX USAConsolidated Houston, TX USACrosby Minneapolis, MN USAEnardo Tulsa, OK USAFarris Tulsa, OK USAGroth Stafford, TX USAMercer Oklahoma City, OK USATaylor Oklahoma City, OK USA3.14 PROCESS CONTROL VALVESFisher Sherman, TX USAKimray Oklahoma City, OK USA3.15 AFTERMARKET VALVESCameron Aftermarket assembled in Houston USAFisher Controls Aftermarket Sherman, TX USAOFM Aftermarket (Aftermarket group to SPX) assembled in Houston USASullivan and Sons (Fisher Products Only) Baton Rouge, LA USA3.16 NEEDLE VALVESAnderson Greenwood (Tyco) Houston, TX USABalon Oklahoma City, OK USAKF (Circor Energy) Oklahoma City, OK USA

3.11 PIPELINE GATE VALVE (API 6D) (Slab & Through Conduit)

T-029Rev: 5.4

Rev. Date: 7/13/2015




Parker Cleveland, OH USASwagelock Solon, OH USA

T-029Rev: 5.4

Rev. Date: 7/13/2015


- Stainless steel includes TP 304, 316, 321, and 347 materials

Manufacturer Rev: 5.4 Country4.01 STAINLESS STEEL BALL VALVESBalon Oklahoma City, OK USAKF (Circor Energy) China/OKC CHINA/USAKitz Nagasaka JAPANVelan Montreal CANADAVelan Grandby CANADAWarren China/Houston CHINAWKM (Cameron) Oklahoma City, OK USA

Bonney Forge Mount Union, PA USAEdward (Flowserve) Raleigh, NC USAVelan Montreal CANADAVOGT (Flowserve) Sulphur Springs, TX USAVOGT (Flowserve) Marainalai Nagar INDIA

Crane Mexico City MEXICOEdward (Flowserve) Raleigh, NC USAFlowserve Nashville, TN USAKinka Kikai Niigata JAPANPacific Long Beach, CA USAPan Korea Changwon City KOREAPoyam Beasain SPAINRaimondi (Tyco) Milan ITALYTong Yung Busan KOREAVelan Williston, VT USAVelan Ansan City KOREAVelan Lisbon PORTUGALWarren China/Houston CHINA

4.0 VALVES - STAINLESS STEEL

4.02 FORGED STAINLESS STEEL API 602 GATE/GLOBE/CHECK VALVES (Threaded, Socket Weld and Flanged)

4.03 CAST STAINLESS STEEL API 600 AND API 603 GATE/GLOBE/CHECK VALVESThese valves are not fully piggable and their metal seated design prohibits bubble tight shut-off

T-029Rev: 5.4

Rev. Date: 7/13/2015


Manufacturer Rev: 5.4 Country5.01 CARBON STEEL FLANGEBebitz Bebitz GERMANY Bebitz Maharashtra GERMANY Bebitz Saravali, Boisar INDIABoltex Mfg. Co Houston, TX USACoffer (Ameriforge) Houston, TX USAGalperti Houston, TX USAGalperti Gera Lario ITALYGalperti Agata ITALYMetalfar Como ITALYMetalfar Cesana Briana ITALYMetalfar Gelsenkirchen GERMANY National Flange Houston, TX USATri Lad Flange Houston, TX USAWeldbend Chicago, IL USA5.02 HIGH YIELD CS FLANGEBoltex Houston, TX USACoffer (Ameriforge) Houston, TX USAD-L Flange Houston, TX USAFederal Flange Houston, TX USAGalperti Group Agata ITALYGalperti Group Gera Lario ITALYGalperti Group Houston, TX USATri-Lad Flanges Houston, TX USA5.03 SPECIALTY FLANGED-L FLANGE - Includes any alloy, any steel. - 24hr turn- around

Houston , TX USA

5.04 FS FITTINGS (THREADED AND SOCKET WELD)Anvil Columbia, PA USAAnvil Longview, TX USABonney Forge Mt. Union, PA USACapitol (Phoenix Forge Group) Crowley, LA USAIML Casarza Ligure ITALYMEGA Bergamo ITALYPenn (Machine Works) Aston, PA USAPenn (Texas PMW) Houston, TX USAUlma Onati ITALYWFI (Bonney Forge) Houston, TX USA5.05 CARBON STEEL WELD FITTINGSAwagi (ASK) Samutprakam THAILANDCustom Alloy High Bridge, NJ USADynamic Products Houston, TX USAErne Schlins AUSTRIA Erne Murzzuschlag AUSTRIAGulf Manufacturing Houston, TX USAHackney-Ladish Enid, OK USAHackney-Ladish Russellville, AR USA

5.0 FITTINGS & FLANGES - CARBON STEEL

T-029Rev: 5.4

Rev. Date: 7/13/2015




Mill Iron Works Gardena, CA USAShaw (Tubeline) New Brunswick, NJ USAShaw-Alloy Piping Product Shreveport, LA USASteel Forgings Shreveport, LA USASungkwang Bend Busan KOREATechnoforge Piacenza ITALYTectubi Raccordi Piacenza ITALYTenaris Monterrey MEXICOTenaris-Riga Nuevo Leon MEXICOTFA Portland, OR USATK Corp Busan KOREAWeldbend Chicago, IL USA5.06 HIGH YIELD CS WELD FITTINGSAwaji Samutprakarn THAILANDBenkan Ota City JAPANCustom Alloy High Bridge, NJ USAErne Schlins AUSTRIAEze Flow Granby CANADAGulf Manufacturing Houston, TX USAHackney-Ladish Enid, OK USAHackney-Ladish Russellville, AR USAMills Iron Works Gardena, CA USAShaw-Alloy Piping Product Shreveport, LA USASteel Forgings Shreveport, LA USATectubi Raccordi Piacenza ITALYTennaris Monterrey MEXICOTFA Portland, OR USAWeldbend Chicago, IL USA5.07 INDUCTION BENDSAmerican Pipe Bending - Specify if fully segmentable needed Tulsa, OK USA

BendTec - Specify if fully segmentable needed Duluth, MN USA

Dynamic Products - Specify if fully segmentable needed. Houston, TX USA

Houston Pipe Benders - Specify if fully segmentable needed Houston, TX USA

KLAD (PCC Energy) - Special cladding of any kind Houston, TX USA

ShawCor - Specify if fully segmentable needed Shreveport, LA USA

Tulsa Tube Benders - Limited on larger sizes, but still send inquiry Tulsa, OK USA

Turner - Specify if fully segmentable needed Houston, TX USA

T-029Rev: 5.4

Rev. Date: 7/13/2015




5.08 6R, 5R, 3R FULLY SEGMENTABLECustom Alloy Houston, TX USAErne Schlins AUSTRIAHackney-Ladish Russellville, AR USAShaw-Alloy Piping Product Shreveport, LA USATectubi Raccordi Piacenza ITALY TFA Portland, OR USA5.09 HOT TAP FITTINGSWeldFit Houston, TX USATD Williamson Oklahoma City, OK USASteel Forgings Shreveport, LA USA

T-029Rev: 5.4

Rev. Date: 7/13/2015



ASP Totowa, NJ USABonney Forge Mt. Union, PA USACapitol/Camco/Phoenix Forge Crowley, LA USAIML Casarza Ligure ITALYISE Osaka JAPANM.E.G.A. Bergamo ITALYOMC Piacenza ITALYPenn Machine Works Aston, PA USAPenn Machine Works Houston, TX USAWestbrook Manufacturing Houston, TX USA6.02 STAINLESS STEEL BUTTWELD FITTINGSAPP (Shaw) Shreveport, LA USAAwaji (ASK) Samutprakarn THAILANDBenkan Corp Kiryu City JAPANBenkan Corp Amagasaki City JAPANCanadoil Forge Bécancour CANADACore Pipe (Formerly Gerlin) (Picor) Carol Stream, IL USACustom Alloy High Bridge, NJ USADynamic Products Inc Houston, TX USAErne Schlins AUSTRIAErne Murzzuschlag AUSTRIAEzeflow Granby CANADAFilmag Rivolta D'Adda ITALYFlowline New Castle, PA USAMach Industries Houston, TX USAPetrol Raccord Calendasco (Piacenza) ITALYSK Bend Busan KOREASumikin Kikoh Hyoga JAPANTaylor Forge Somerville, NJ USATectubi Milan ITALYThai Benkan (Up to NPS 16") Samutprakarn THAILANDTK Corp Busan KOREAWFI (Bonney Forge) Houston, TX USAWilhelm Schultz Krefeld GERMANY6.03 STAINLESS STEEL ANSI 150-300 FLANGESAmeriforge Houston, TX USABebitz Lepzig GERMANYBebitz Saravali, Boisar INDIACore Pipe (Formerly Gerlin) Shangai CHINAFederal Houston, TX USAGalperti Houston, TX USAGroup Genoyer (Carlyle) Vittorlles FRANCEJMD-Viraj (Not to be confused with ‘Viraj’) Saravali, Boisar INDIAKerkau Bay City, MI USAKofco Ulsan KOREALokring Willoughby, OH USAMelesi Cortenova ITALY

6.0 FITTINGS & FLANGES - STAINLESS STEEL- Stainless steel includes TP 304, 316, 321, and 347 materials

6.01 FORGED STAINLESS STEEL FITTINGS (Threaded and Socket Weld)

T-029Rev: 5.4

Rev. Date: 7/13/2015



6.0 FITTINGS & FLANGES - STAINLESS STEEL- Stainless steel includes TP 304, 316, 321, and 347 materials

Metalfar (Date stamped 01/07 or later) Cesana, Brianza ITALYMie Techno Kuwana JAPANNakamura Iron Works Sakai JAPANNational Flange Houston, TX USATexas Metal Works Houston, TX USATube-Line Carol Stream, IL USAUlma - Forja Oñati SPAINWesterm of Texas Forge & Flange Lumberton, TX USAWestern Forge & Flange Cleveland, TX USAWFI (Bonney Forge) Houston, TX USAWilhelm Geldbach (WGI) Gelsenkirchen GERMANYWilhelm Geldbach (WGI) Valcea ROMANIA6.04 STAINLESS STEEL ANSI 600 & UP FLANGESAmeriforge Houston, TX USABebitz Bebitz GERMANYBebitz Saravali, Boisar INDIACore Pipe Shangai CHINAFederal Houston, TX USAGalperti Houston, TX USAKerkau Bay City, MI USAKofco Ulsan KOREAMelesi Cortenova ITALYMetalfar (Date stamped 01/07 or later) Cesana, Brianza ITALYMie Techno Kuwana JAPANNakamura Iron Works Sakai JAPANNational Flange Houston ,TX USATexas Metal Works Houston, TX USATube-Line Carol Stream, IL USAUlma - Forja Oñati SPAINWesterm of Texas Forge & Flange Lumberton, TX USAWestern Forge & Flange Cleveland, TX USAWFI (Bonney Forge) Houston, TX USA6.05 SPECIALTY FLANGED-L FLANGE - Includes any alloy, any steel. - 24hr turn- around

Houston , TX USA

T-029Rev: 5.4

Rev. Date: 7/13/2015


Manufacturer Rev: 5.4 Country7.01 PIG TRAP CLOSURE-THREADEDHuber-Yale (R&M) Houston, TX USASuperior (Circor Energy) Tulsa, OK USATDW Houston, TX USA7.02 PIG TRAP CLOSURE-WELD ENDHuber-Yale (R&M) Houston, TX USASuperior (Circor Energy) (top flow, stop flow) Tulsa, OK USATDW Houston, TX USA7.03 PRESSURE VESSEL CLOSURE-WELD ENDHuber-Yale (R&M) Houston, TX USAModco Industries Tulsa, OK USAModco Industries Conroe, TX USASypris Technologies (Tubeturn) Louisville, KY USATDW Houston, TX USA

7.0 CLOSURES

T-029Rev: 5.4

Rev. Date: 7/13/2015


Manufacturer Rev: 5.4 Country8.01 GASKETSFlexitallic Deer Park, TX USAFlexitallic Guadalajara MEXICO Flexitallic PuDong CHINAFlexitallic Wujiang CHINAGarlock Houston, TX USAGarlock Palmyra, NY USALamons Houston, TX USALamons Veracruz MEXICO Lamons Hangzhou CHINA8.02 METAL RING JOINT GASKETSDan-Loc Houston, TX USALamons Houston, TX USASIGS (Smith Inter. Gulf Services) Mutrah UAEWolar Houston, TX USA8.03 FASTENERSAuge Industrial Fasteners Houston, TX USADan-Loc Houston, TX USAHighland Threads Houston, TX USALamons Houston, TX USALone Star Fasteners Spring, TX USALone Star Fasteners Ningbo CHINAQuality Bolt Brecksville, OH USA

8.0 GASKETS & FASTENERS

T-029Rev: 5.4

Rev. Date: 7/13/2015


Manufacturer Rev: 5.4 Country9.01 All MaterialsAnvil/Beck Waynesboro, PA USACapitol/Camco/Phoenix Forge Crowley, LA USAMerit Brass Cleveland, OH USAPenn Machine Works Aston, PA USAPenn Machine-Texas PMW Houston, TX USAWestbrook Manufacturing Houston, TX USA

9.0 PIPE NIPPLES

T-029Rev: 5.4

Rev. Date: 7/13/2015


Manufacturer Rev: 5.4 Country Rentals Aftermarket10.01 FLARESAiroil Flaregas UK Yes YesCallidus (Honeywell) Tulsa, OK USA Yes YesFlare Industries Austin, TX USA Not listed Not listedGBA Houston, TX USA Yes YesHamworthy USA Yes YesJohn Zink Houston, TX USA Yes YesKaldair (John Zink) Houston, TX USA Yes YesKaldair (John Zink) Odessa, TX USA Yes YesKimark SmartFlare Southlake, TX USA Not listed Not listedMESSCO (Moneyhun) Rock Springs, WY USA Yes YesNAO Philadelphia, PA USA Yes YesQuestor Technology, Inc. Calgary, Alberta CANADA Yes YesZeeco Tulsa, OK USA Yes Yes

10.0 ANCILLARY EQUIPMENT

T-029Rev: 5.4

Rev. Date: 7/13/2015


Manufacturer Rev: 5.4 Country11.01 All Strainers (Threaded, Socket Weld and Flanged)Armstrong International Three Rivers, MI USAMueller Steam Specialty St. Pauls, NC USANevis Pipeline Products-UNDER EVALUATION Tomball, TX USASpirax Sarco Blythewood, SC USASure Flow Burlington, Ontario CanadaTitan Flow Control Lumberton, NC USAJamison Products Tomball, TX USA

11.0 Strainers

T-029Rev: 5.4

Rev. Date: 7/13/2015


Manufacturer Rev: 5.4 Country12.01 SUBSTATION TRANSFORMERS - HIGH VOLTAGEABB Zurich SwitzerlandWaukesha (SPX) Waukesha, WI USAWEG Duluth, GA USA12.02 VARIABLE-FREQUENCY DRIVES - MEDIUM VOLTAGETMEIC Tokyo Japan12.03 MOTORSBaldor (ABB) Fort Smith, AR USAWEG Waukesha, WI USAGeneral Electric Co. Fairfield, CT USA12.04 ELECTRICAL POWER AND CONTOL EQUIPMENTEaton Fayettville, NC USASchneider Electric Palatine, IL USA

12.0 ELECTRICAL

T-029Rev: 5.4

Rev. Date: 7/13/2015


Manufacturer Rev: 5.4 Country13.01 CHROMATOGRAPHS & ANALYZERSABB Zurich SwitzerlandDaniel (Rosemount Analytical) Houston, TX USAAMI Huntington Beach, CA USASpectraSensors Houston, TX USATeledyne Thousand Oaks, CA USA13.02 INSTRUMENTATION, SENSORS, & TRANSMITTERSEmerson Companies Shakopee, MN USAAdvanced Telemetrics Farmington, NM USA13.03 CONTINUOUS SAMPLERSYZ Systems Houston, TX USA Parker PGI Houston, TX USA13.04 SAMPLING PROBES & CONDITIONING EQUIPMENTA+ Corporation Gonzales, LA USAMustang Sampling Ravenswood, WV USAWelker Sugar Land, TX USAYZ Systems Houston, TX USA13.05 TUBINGSwagelok Solon, OH USAParker (Instrument grade) Cleveland, OH USAThermon Heat Trace Tubing Houston, TX USAMustang (DC heat trace) Ravenswood, WV USAClayborn Labs (DC heat trace) Truckee, CA USA13.06 CALIBRATION DEVICESAltec Everett, WA USA Practical Instrument Electronics, Inc. Westbury, NY USA Crystal Engineering San Luis Obispo, CA USA Ametek Berwyn, PA USA Thermoprobe Pearl, MS USA 13.07 RTU & PLCEmerson-Fisher Tulsa, OK USAAllen-Bradley (Combined with Fisher) Milwaukee, WI USASchneider Electric (ScadaPack) Rueil Malmaison FranceOmni Sugar Land, TX USAFMC Technologies (Accuload) Houston, TX USA13.08 ORIFICE PLATESKelly Texarkana, TX USADaniel Houston, TX USA13.09 ORIFICE FITTINGSDaniel Houston, TX USATMCo Wewoka, OK USA13.10 ULTRASONIC METERSDaniel SeniorSonic Houston, TX USASick FlowSic Waldkirch Germany13.11 ROTARY METERSElster Instromet Mainz-Kastel GermanyDresser Roots (General Electric) Fairfield, CT USA

13.0 MEASUREMENT

T-029Rev: 5.4

Rev. Date: 7/13/2015



13.0 MEASUREMENT

13.12 CORIOLIS METERSEmerson Micro-Motion (Elite) Shakopee, MN USA13.13 V-CONE METERSCameron Houston, TX USAMcCrometer Hemet, CA USA13.14 TURBINE METERSSensus DuBois, PA USANuFlo (Cameron) Houston, TX USA

T-029Rev: 5.4

Rev. Date: 7/13/2015


Manufacturer Rev: 5.4 Country14.01 Fiber Reinforced Pipe (FRP)Flex Pipe Systems Calgary, Alberta Canada

14.0 Non-Steel Pipe

Approved Manufacturers List - Internal Use Only · PDF fileThe purpose of the Access Midstream...

Documents

Transcript of Approved Manufacturers List - Internal Use Only · PDF fileThe purpose of the Access Midstream...