Anglicky v odborných předmětech " Support of teaching technical subjects in English“
Anglicky v odborných předmětech "Support of teaching technical subjects in English “
description
Transcript of Anglicky v odborných předmětech "Support of teaching technical subjects in English “
Snmek 1
Anglicky v odbornch pedmtech"Support of teaching technical subjects in EnglishTutorial: Engineering technology
Topic: Weldstesting
Prepared by: Ing. Josef Martink st.
Projekt Anglicky v odbornch pedmtech, CZ.1.07/1.3.09/04.0002je spolufinancovn Evropskm socilnm fondem a sttnm rozpotem esk republiky.
Welds quality depends on the type of used technologyDepends on prescribed conditionsSteel construction welding, piping welding, vessels of nuclear reactors Quality of welds are important it is necessary to test themWelds quality to bending
Weldability testing
Testing plateMandrelWeld depositTesting plateMandrelCarry rollersWeld cladding bending testWeld fracture testing
Weld root is checked at bendingBend angle is to120Damaged weld is fractured
Test samples for bending test
Root run of fillerWeld testing is done by fracturingAt fractures are visible sand inclusions of coated electrode
Multilayer weld
Types of weld beadsWeak current
Normal currentHeavy current
Spraying by red colour - weldWeld washing to remove red colour from surfaceWhite colour spraying , red colour rises from weld by capillary action and if it is there crack is shown.
Non-destructive testing - capillary
Longitudinal defect detection cavities, fissures etc.Resistance and induction welding of steel pipe
Ultrasonic test
ScreenDefectsTested productContact mediumProbeLimit echo of back wallFailure echo soundsInput soundMeasuring instrument
Weld macrostructureX-ray picture processed by TV chainDeffects - lighter partsControl steel up to width of 80 mm, aluminium 800 mm
X-ray tests
X-ray lampMaterial defectsPicture amplifierVideo cameraProductX-ray radiationProduct pictureTesting chamber
X-ray testing
Describe capillary testingDescribe X-ray testingWhat does the weld resistance to bend depend on?Questions and revision
DILLINGER. KOLEKTIV. Modern strojrenstv pro kolu i praxi. ISBN 9788086706191. pro konkurenceschopnost, ESF 2007 2013.Translation:www.seznam.czwww.slovnik.czJANATA, Petr. Handy slovnk technick anglicko-esk a esko-anglick. Plze: Nakladatelstv Fraus, 2000. ISBN 80-7238-075-3Lingea LEXIKON 5, Technick slovnk anglicko-esk a esko-anglick. 2010.
Literature